Modified gold surfaces by poly(amidoamine) dendrimers and fructose dehydrogenase for mediated fructose sensing

Lab-made flexible third-generation fructose biosensors based on 0D-nanostructured transducers

Herein, we report a scalable benchtop electrode fabrication method to produce highly sensitive and flexible third-generation fructose dehydrogenase amperometric biosensors based on water-dispersed 0D-nanomaterials. The electrochemical platform was fabricated via Stencil-Printing (StPE) and insulated via xurography. Carbon black (CB) and mesoporous carbon (MS) were employed as 0D-nanomaterials promoting an efficient direct electron transfer (DET) between fructose dehydrogenase (FDH) and the transducer. Both nanomaterials were prepared in water-phase via a sonochemical approach. The nano-StPE exhibited enhanced electrocatalytic currents compared to conventional commercial electrodes. The enzymatic sensors were exploited for the determination of D-fructose in model solutions and various food and biological samples. StPE-CB and StPE-MS integrated biosensors showed appreciable sensitivity (∼150 μA cm-2 mM-1) with μmolar limit of detection (0.35 and 0.16 μM, respectively) and extended linear range (2-500 and 1-250 μM, respectively); the selectivity of the biosensors, ensured by the low working overpotential (+0.15 V), has been also demonstrated. Good accuracy (recoveries between 95 and 116%) and reproducibility (RSD ≤8.6%) were achieved for food and urine samples. The proposed approach because of manufacturing versatility and the electro-catalytic features of the water-nanostructured 0D-NMs opens new paths for affordable and customizable FDH-based bioelectronics.

Electrospun Nanofibers including Organic/Inorganic Nanohybrids: Polystyrene- and Clay-Based Architectures in Immunosensor Preparation for Serum Amyloid A

Diagnostic techniques based on biomolecules have application potential that can be realized in many fields, such as disease diagnosis, bioprocess imaging, food/beverage industries, and environmental pollutant imaging. Successful surface immobilization of biomolecules is critical to increasing the stabilization, sensitivity, and selectivity of biomolecules used in bioassay systems. Nanofibers are good candidates for the immobilization of biomolecules owing to many advantages such as morphology and pore size. In this study, montmorillonite (MMT) clay is modified with poly(amidoamine) (PAMAM) generation 3 (PAMAM_G3) and added to polystyrene (PS) solutions, following which PS/MMT-PAMAM_G3 nanofibers are obtained using the electrospinning method. The nanofibers are obtained by testing PS% (wt%) and MMT-PAMAM_G3% (wt%) ratios and characterized with scanning electron microscopy. Antiserum amyloid A antibody (Anti-SAA) is then conjugated to the nanofibers on the electrode surface via covalent bonds using a zero-length cross linker. Finally, the obtained selective surface is used for electrochemical determination of serum amyloid A (SAA) levels. The linear range of PS/MMT-PAMAM/Anti-SAA is between 1 and 200 ng/mL SAA, and the detection limit is 0.57 ng/mL SAA. The applicability of PS/MMT-PAMAM_G3/Anti-SAA is investigated by taking measurements in synthetic saliva and serum both containing SAA.

Novel Approaches to Enzyme-Based Electrochemical Nanobiosensors

Electrochemistry is a genuinely interdisciplinary science that may be used in various physical, chemical, and biological domains. Moreover, using biosensors to quantify biological or biochemical processes is critical in medical, biological, and biotechnological applications. Nowadays, there are several electrochemical biosensors for various healthcare applications, such as for the determination of glucose, lactate, catecholamines, nucleic acid, uric acid, and so on. Enzyme-based analytical techniques rely on detecting the co-substrate or, more precisely, the products of a catalyzed reaction. The glucose oxidase enzyme is generally used in enzyme-based biosensors to measure glucose in tears, blood, etc. Moreover, among all nanomaterials, carbon-based nanomaterials have generally been utilized thanks to the unique properties of carbon. The sensitivity can be up to pM levels using enzyme-based nanobiosensor, and these sensors are very selective, as all enzymes are specific for their substrates. Furthermore, enzyme-based biosensors frequently have fast reaction times, allowing for real-time monitoring and analyses. These biosensors, however, have several drawbacks. Changes in temperature, pH, and other environmental factors can influence the stability and activity of the enzymes, affecting the reliability and repeatability of the readings. Additionally, the cost of the enzymes and their immobilization onto appropriate transducer surfaces might be prohibitively expensive, impeding the large-scale commercialization and widespread use of biosensors. This review discusses the design, detection, and immobilization techniques for enzyme-based electrochemical nanobiosensors, and recent applications in enzyme-based electrochemical studies are evaluated and tabulated.

Antibody-Conjugated Electrospun Nanofibers for Electrochemical Detection of Methamphetamine

Multifunctional electrospun nanofibers (ENs) with improved properties have increased attention nowadays. Their insoluble forms in water with decreased hydrophobicity are desired for the immobilization of biological molecules. Also, the addition of functional groups on the backbone provides the conjugation of biomolecules onto the surface of ENs via covalent bonds to increase their stability. Here, poly(vinylidene fluoride) (PVDF) was chosen to prepare a platform, which is insoluble in water, and polyethylenimine (PEI) was used to add amine groups on the surface of ENs to bind biological molecules via covalent conjugation. So, PVDF-PEI nanofibers were prepared on a glassy carbon electrode to immobilize an antimethamphetamine antibody (Anti-METH) as a model biomolecule. The obtained PVDF-PEI/Anti-METH was used for the bioelectrochemical detection of methamphetamine (METH), a common illicit drug. Bioelectrochemical detection of METH on PVDF-PEI/Anti-METH-coated electrodes was carried out by voltammetry in the range of 2.0-50 ng/mL METH. Moreover, the effect of dansyl chloride (DNC) derivatization of METH on the sensitivity of PVDF-PEI/Anti-METH was tested. Finally, METH analysis was carried out in synthetic body fluids. The obtained results showed that PVDF-PEI ENs can be adopted as an immobilization matrix for the biorecognition elements of biobased detection systems, and the derivative of METH (METH-DNC) increased the sensitivity of PVDF-PEI/Anti-METH.

Development of an Enzymatic Biosensor Using Glutamate Oxidase on Organic-Inorganic-Structured, Electrospun Nanofiber-Modified Electrodes for Monosodium Glutamate Detection

Herein, dendrimer-modified montmorillonite (Mt)-decorated poly-Ɛ-caprolactone (PCL) and chitosan (CHIT)-based nanofibers were prepared. Mt was modified with a poly(amidoamine) generation 1 (PAMAM_G1) dendrimer, and the obtained PAMAM_G1-Mt was incorporated into the PCL-CHIT nanofiber's structure. The PCL-CHIT/PAMAM_G1-Mt nanofibers were conjugated with glutamate oxidase (GluOx) to design a bio-based detection system for monosodium glutamate (MSG). PAMAM_G1-Mt was added to the PCL-CHIT backbone to provide a multipoint binding side to immobilize GluOx via covalent bonds. After the characterization of PCL-CHIT/PAMAM_G1-Mt/GluOx, it was calibrated for MSG. The linear ranges were determined from 0.025 to 0.25 mM MSG using PCL-CHIT/Mt/GluOx and from 0.0025 to 0.175 mM MSG using PCL-CHIT/PAMAMG₁-Mt/GluOx (with a detection limit of 7.019 µM for PCL-CHIT/Mt/GluOx and 1.045 µM for PCL-CHIT/PAMAMG₁-Mt/GluOx). Finally, PCL-CHIT/PAMAMG₁-Mt/GluOx was applied to analyze MSG content in tomato soup without interfering with the sample matrix, giving a recovery percentage of 103.125%. Hence, the nanofiber modification with dendrimer-intercalated Mt and GluOx conjugation onto the formed nanocomposite structures was performed, and the PCL-CHIT/PAMAM_G1-Mt/GluOx system was successfully developed for MSG detection.

Carbon Nanotube-Incorporated Nanofibers for Immunosensor Preparation against CD36

The increased serum concentration of CD36 is significantly associated with atherosclerosis, insulin resistance, and diabetes mellitus. Currently, there is no sensor system used for the detection of CD36 in the clinical field. Therefore, there is a need to develop a sensor system for the detection of CD36. The large surface area/volume ratio and controllable surface conformation of electrospun nanofibers (ENs) make them highly attractive for immunosensor applications. In the present study, PS/MWCNT-PAMAM ENs were produced and used as an immobilization matrix of Anti-CD36. Thus, the electrochemical behavior of the developed nanocomposite-based ENs and their usage potential were investigated for immunosensor applications. First, an oxidized multiwall carbon nanotube (MWCNT-OH) was synthesized and modified with a polyamidoamine generation 3 (PAMAM G3) dendrimer. The synthesized MWCNT-PAMAM nanocomposite was mixed with polystyrene (PS) solutions at different ratios to produce bead-free, smooth, and uniform PS/MWCNT-PAMAM ENs. PS/MWCNT-PAMAM ENs were accumulated on a screen-printed carbon electrode (SPCE) using the electrospinning technique. A biofunctional surface on the PS/MWCNT-PAMAM EN-coated SPCE was created using carbodiimide chemistry by covalent immobilization of Anti-CD36. The analytic performance characteristics of the developed PS/MWCNT-PAMAM/Anti-CD36 immunosensor were determined by performing electrochemical measurements in the presence of the CD36 protein. The linear detection range was found to be from 5 to 40 ng/mL, and the limit of detection was calculated as 3.94 ng/mL for CD36. The developed PS/MWCNT-PAMAM/Anti-CD36 immunosensor also displayed high tolerance to interference substances, good repeatability, and high recovery percent (recovery%) for artificial blood serum analysis.

Quantitative determination of H2O2 for detection of alanine aminotransferase using thin film electrodes

The abnormal concentrations or absence of biomolecules (e.g., proteins) in blood can further be used in diagnosis of a particular pathology at an early stage. Current studies are intensely focusing on the analysis of interaction and detection of biomolecules via point-of-care systems (POCs), allowing miniaturized and parallelized reactions, simultaneously. Recent developments have shown that the collaboration of electrochemical sensing techniques and POCs to overcome challenging problems in health-care settings provides new approaches in diagnosis and treatment of diseases. The aim of this study was to adapt the alanine aminotransferase (ALT) enzyme to the platinum (Pt) thin film electrode system and quantitatively determine the enzyme levels via enzymatically generated H₂O₂ with differential pulse voltammetry (DPV). A simple potentiostat architecture with expanded sweep range utilizing dual LMP91000 devices was developed and adapted to the needs of the biosensor. In order to calibrate the system, known concentrations of H₂O₂ were also tested. Moreover, signals associated with the other electroactive species coming from the ALT reaction were eliminated. Resulted potential range has been achieved between +500 mV and +900 mV and the linear range was found to be 0.05 M-0.5 M for H₂O₂, whereas 5 UL^-1 to 120 UL^-1 for ALT enzyme.

The influence of the shape of Au nanoparticles on the catalytic current of fructose dehydrogenase

Graphite electrodes were modified with triangular (AuNTrs) or spherical (AuNPs) nanoparticles and further modified with fructose dehydrogenase (FDH). The present study reports the effect of the shape of these nanoparticles (NPs) on the catalytic current of immobilized FDH pointing out the different contributions on the mass transfer-limited and kinetically limited currents. The influence of the shape of the NPs on the mass transfer-limited and the kinetically limited current has been proved by using two different methods: a rotating disk electrode (RDE) and an electrode mounted in a wall jet flow-through electrochemical cell attached to a flow system. The advantages of using the wall jet flow system compared with the RDE system for kinetic investigations are as follows: no need to account for substrate consumption, especially in the case of desorption of enzyme, and studies of product-inhibited enzymes. The comparison reveals that virtually identical results can be obtained using either of the two techniques. The heterogeneous electron transfer (ET) rate constants (k_S) were found to be 3.8 ± 0.3 s^-1 and 0.9 ± 0.1 s^-1, for triangular and spherical NPs, respectively. The improvement observed for the electrode modified with AuNTrs suggests a more effective enzyme-NP interaction, which can allocate a higher number of enzyme molecules on the electrode surface. Graphical abstract The shape of gold nanoparticles has a crucial effect on the catalytic current related to the oxidation of D-(-)-fructose to 5-keto-D-(-)-fructose occurring at the FDH-modified electrode surface. In particular, AuNTrs have a higher effect compared with the spherical one.

Bioelectrocatalytic performance of d-fructose dehydrogenase

This review summarizes the bioelectrocatalytic properties of d-fructose dehydrogenase (FDH), while taking into consideration its enzymatic characteristics. FDH is a membrane-bound flavohemo-protein with a molecular mass of 138 kDa, and it catalyzes the oxidation of d-fructose to 5-keto-d-fructose. The characteristic feature of FDH is its strong direct-electron-transfer (DET)-type bioelectrocatalytic activity. The pathway of the DET-type reaction is discussed. An overview of the application of FDH-based bioelectrocatalysis to biosensors and biofuel cells is also presented, and the benefits and problems associated with it are extensively discussed.

Highly Sensitive Membraneless Fructose Biosensor Based on Fructose Dehydrogenase Immobilized onto Aryl Thiol Modified Highly Porous Gold Electrode: Characterization and Application in Food Samples

In this paper we present a new method to electrodeposit highly porous gold (h-PG) onto a polycrystalline solid gold electrode without any template. The electrodeposition is carried out by first cycling the electrode potential between +0.8 and 0 V in 10 mM HAuCl₄ with 2.5 M NH₄Cl and then applying a negative potential for the production of hydrogen bubbles at the electrode surface. After that the modified electrode was characterized in sulfuric acid to estimate the real surface area ( A_real) to be close to 24 cm², which is roughly 300 times higher compared to the bare gold electrodes (0.08 cm²). The electrode was further incubated overnight with three different thiols (4-mercaptobenzoic acid (4-MBA), 4-mercaptophenol (4-MPh), and 4-aminothiophenol (4-APh)) in order to produce differently charged self-assembled monolayers (SAMs) on the electrode surface. Finally a fructose dehydrogenase (FDH) solution was drop-cast onto the electrodes. All the modified electrodes were investigated by cyclic voltammetry both under nonturnover and turnover conditions. The FDH/4-MPh/h-PG exhibited two couples of redox peaks for the heme c₁ and heme c₂ of the cytochrome domain of FDH and as well as a well pronounced catalytic current density (about 1000 μA cm^-2 in the presence of 10 mM fructose) due to the presence of -OH groups on the electrode surface, which stabilize and orientate the enzyme layer on the electrode surface. The FDH/4-MPh/h-PG based electrode showed the best analytical performance with an excellent stability (90% retained activity over 90 days), a detection limit of 0.3 μM fructose, a linear range between 0.05 and 5 mM, and a sensitivity of 175 ± 15 μA cm^-2 mM^-1. These properties were favorably compared with other fructose biosensors reported in the literature. The biosensor was successively tested to quantify the fructose content in food and beverage samples. No significant interference present in the sample matrixes was observed.

Array of biosensors for discrimination of grapes according to grape variety, vintage and ripeness

A bioelectronic tongue based on nanostructured biosensors specific for the simultaneous detection of sugars and phenols has been developed. The array combined oxidases and dehydrogenases immobilized on a lipidic layer prepared using the Langmuir-Blodgett technique where Glucose oxidase, d-Fructose dehydrogenase, Tyrosinase or Laccase were imbibed. A phthalocyanine was co-immobilized in the sensing layer and used as electron mediator. The array thus formed has been used to analyze grapes and provides global information about the samples while providing specific information about their phenolic and their sugar content. Using Principal Component Analysis (PCA) the array of voltammetric biosensors has been successfully used to discriminate musts prepared from different varieties of grapes (Tempranillo, Garnacha, Cabernet-Sauvignon, Prieto Picudo and Mencía). Differences could be also detected between grapes of the same variety and cultivar harvested in two successive vintages (2012 and 2013). Moreover, the ripening of grapes could be monitored from veraison to maturity due to the changes in their phenolic and sugar content. Using Partial Least Squares (PLS-1) analysis, excellent correlations have been found between the responses provided by the array of biosensors and classical parameters directly related to phenols (total polyphenol index, TPI) and sugar concentration (degree Brix) measured by chemical methods with correlation coefficients close to 1 and errors close to 0. It is also worthy to notice the good correlations found with parameters associated with the pH and acidity that can be explained by taking into account the influence of the pH in the oxidation potentials of the phenols and in the enzymatic activity. This bioelectronic tongue can assess simultaneously the sugar and the phenolic content of grapes and could be used to monitor the maturity of the fruit and could be adapted easily to field analysis.

Sol-gel Approaches for Elaboration of Polyol Dehydrogenase-Based Bioelectrodes

This review describes the input of sol-gel chemistry to the immobilization of polyol dehydrogenases on electrodes, for applications in bioelectrocatalysis. The polyol dehydrogenases are described and their application for biosensing, biofuel cell and electrosynthesis are briefly discussed. The immobilization of proteins via sol-gel approaches is described, including a discussion on the difficulty to maintain the activity of proteins in a silica matrix and the strategies developed to offer a proper environment to the proteins by developing optimal organic-inorganic hybrid materials. Finally, the co-immobilization of the NAD + co-factor and of mediators for the elaboration of reagentless devices is presented, based on published and original data. All-in-all, sol-gel approaches appear to be a very promising for development of original electrochemical applications involving dehydrogenases in near future.