Analysis of quinolone antibiotic derivatives in sewage sludge samples by liquid chromatography-tandem mass spectrometry: comparison of the efficiency of three extraction techniques

Challenges and effective tracking down strategies of antibiotic contamination in aquatic ecosystem

A growing environmental concern revolves around the widespread use of medicines, particularly antibiotics, which adversely impact water quality and various life forms. The unregulated production and utilization of antibiotics not only affect non-targeted organisms but also exert significant evolutionary pressures, leading to the rapid development of antimicrobial resistance (AMR) in bacterial communities. To address this issue, global studies have been conducted to assess the prevalence and quantities of antibiotics in various environmental components including freshwater, ocean, local sewage, and fish. These studies aim to establish effective analytical methods for identifying and measuring antibiotic residues in environmental matrices that might enable authorities to establish norms for the containment and disposal of antibiotics. This article offers a comprehensive overview of methods used to extract antibiotics from environmental matrices exploring purification techniques such as liquid-liquid extraction, solid-phase extraction, green extraction techniques, and concentration methods like lyophilization and rotary evaporation. It further highlights qualitative and quantitative analysis methods, high-performance liquid chromatography, ultra-high-performance liquid chromatography, and liquid chromatography-tandem along with analytical methods such as UV-Vis and tandem mass spectrometry for detecting and measuring antibiotics. Urgency is underscored for proactive strategies to curb antibiotic contamination, safeguarding the integrity of aquatic ecosystems and public health on a global scale.

Assessing antibiotic residues in sediments from mangrove ecosystems: A review

Antibiotics' widespread and abusive use in aquaculture and livestock leads to extensive environmental dissemination and dispersion, consequently increasing antibiotic-resistant bacteria in marine ecosystems. Hence, there is an increased need for efficient methods for identifying and quantifying antibiotic residues in soils and sediments. From a review of the last 20 years, we propose and compare different chromatographic techniques for detecting and quantifying antibiotics in sediment samples from marine ecosystems, particularly in mangrove forest sediments. The methods typically include three stages: extraction of antibiotics from the solid matrix, cleaning, and concentration of samples before quantification. We address the leading causes of the occurrence of antibiotics in marine ecosystem sediments and analyze the most appropriate methods for each analytical stage. Ultimately, selecting a method for identifying antibiotic residues depends on multiple factors, ranging from the nature and physicochemical properties of the analytes to the availability of the necessary equipment and the available resources.

Targeted multi-analyte UHPLC-MS/MS methodology for emerging contaminants in septic tank wastewater, sludge and receiving surface water

Septic tanks treat wastewater of individual houses and small communities (up to 2000 people in Scotland) in rural and semi-urban areas and are understudied sources of surface water contamination. A multi-analyte methodology with solid phase extraction (SPE), ultra-sonic extraction, and direct injection sample preparation methods was developed to analyse a comprehensive range of emerging contaminants (ECs) including prescription and over-the-counter pharmaceuticals and related metabolites, natural and synthetic hormones, and other human wastewater marker compounds in septic tank influent and effluent, river water, suspended solids, and septic tank sludge by ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS). The number of quantifiable compounds in each matrix varied from 68 in septic tank wastewater to 59 in sludge illustrating its applicability across a range of matrices. Method quantification limits were 2.9 × 10-5-1.2 μg L-1 in septic tank influent, effluent and river water, with ≤0.01 μg L-1 achieved for 60% of ECs in all three water matrices, and 0.080-49 μg kg-1 in sludge. The developed method was applied to a septic tank (292 population equivalents) and the receiving river in the North-East of Scotland. Across all samples analysed, 43 of 68 ECs were detected in at least one matrix, demonstrating the method's sensitivity. The effluent concentrations suggest limited removal of ECs in septic tanks and a potential impact to river water quality for some ECs. However, further monitoring is required to better appreciate this. The developed methodology for a wide variety of ECs in a range of liquid and solid phases will allow, for the first time, a comprehensive assessment of ECs fate and removal in septic tanks, and their impact to surface water quality.

Multiresidue method for the determination of critically and highly important classes of antibiotics and their metabolites in agricultural soils and sewage sludge

In this paper, a method is proposed for the determination of antibiotics classified by the World Health Organization as critically important (four macrolides and three quinolones) and highly important (one tetracycline, one diaminopyridine, and three sulfonamides) and eight of their metabolites. The method is based on ultrasound-assisted extraction, dispersive solid-phase extraction clean-up, and analytical determination by liquid chromatography-tandem mass spectrometry. Variables affecting each stage of the analytical method were thoroughly optimised. The method was validated for its application to sewage sludge from different treatment stages (non-treated sludge: primary and secondary sludge; and treated sludge: digested sludge and compost) and to agricultural soil. Limits of quantification were in the range of 0.03-7.50 ng g-1 dry weight (dw) for most of the compounds. Accuracy values were in the range of 70-102%. Precision was below 17%. The application of the method to real samples revealed that macrolides and fluoroquinolones were the antibiotic classes at the highest concentrations in all types of samples. The lowest concentrations of antibiotics were measured in compost (highest concentration: 27 ng g-1 dw, corresponding to norfloxacin) and soil samples (highest concentration: 93 ng g-1 dw, corresponding to a metabolite of clarithromycin). The proposed method is the first developed to date for the determination of multiclass antibiotics and their main metabolites in sludge from different treatment stages. The method can provide a useful tool for obtaining information about antibiotics in sewage sludge prior to its application to agricultural soils and in agricultural soils.

Green Assessment of Analytical Procedures for the Determination of Pharmaceuticals in Sewage Sludge and Soil

The main difficulties when analyzing pharmaceutically active compounds (PhACs) in solid environmental samples is the complexity of the samples and the low concentration levels of such pollutants. Most efforts are focused in achieving good analytical performance parameters such as high recoveries or low detection limits without considering if the methods are environmentally friendly. In this work, the main tools proposed for assessing the greenness of analytical methodologies (Analytical Eco-scale, Green Analytical Procedure Index (GAPI), and Analytical GREEnness metric (AGREE)) have been applied to nine analytical procedures that include recent important analytical tendencies. The three metrics identified the paper spray ionization method as the greenest procedure since it used untreated samples for direct mass spectrometry analysis. Using Analytical Eco-scale, most of the evaluated procedures were rated as "acceptable green". However, the use of internal standards resulted key in the environmental impact of the method which provided contradictory results versus other metrics. GAPI found greenness similarities between most of selected methods, hindering a greenness classification. AGREE allowed the weighting of each evaluation criterion providing a greenness ranking. The application of each metric detecting their weaknesses and strengths was discussed. The incorporation of validation analytical features in greenness metrics was a gap revealed.

Role of a typical swine liquid manure treatment plant in reducing elements of antibiotic resistance

Biological treatment of swine liquid manure may be a favorable environment for the enrichment of bacteria carrying antibiotic resistance genes (ARGs), raising the alert about this public health problem. The present work sought to investigate the performance of a swine wastewater treatment plant (SWWTP), composed of a covered lagoon biodigester (CLB) followed by three facultative ponds, in the removal of usual pollutants, antibiotics, ARGs (blaTEM, ermB, qnrB, sul1, and tetA), and intI1. The SWWTP promoted a 70% of organic matter removal, mainly by the digester unit. The facultative ponds stood out in the solids' retention carried from the anaerobic stage and contributed to ammonia volatilization. The detected antibiotic in the raw wastewater was norfloxacin (< 0.79 to 60.55 μg L-1), and the SWWTP seems to equalize peaks of norfloxacin variation probably due to sludge adsorption. CLB reduced the absolute abundance of ARGs by up to 2.5 log, while the facultative stage does not seem to improve the quality of the final effluent in terms of resistance elements. Considering the relative abundances, the reduction rates of total and ARG-carrying bacteria appear to be similar. Finally, correlation tests also revealed that organic matter and solids control in liquid manure treatment systems could help reduce the spread of ARGs after the waste final disposal.

Determination of contaminants of emerging concern in raw pig manure as a whole: difference with the analysis of solid and liquid phases separately

The content of veterinary drugs in manure is usually estimated by the amount of residues determined in its solid or liquid phase, individually, which previously required a separation step. As an alternative, a multiresidue method for the analysis of 48 veterinary drugs and other contaminants of emerging concern (CECs) in swine raw manure as a whole has been developed and in-house validated in this work. The impact of several experimental factors during ultrasound assisted extraction was assessed. Hence, the use of alumina seemed to especially decrease the matrix effect and improve the overall recovery of drugs, mainly those with a high octanol-water partition coefficient. CECs in the extracts were analyzed by ultra-high performance liquid chromatography coupled to mass spectrometry in tandem. A standard addition-matrix matched calibration was used for quantification. Application of the method to two related samples (raw manure and farm centrifuged raw manure) from a facility revealed that the concentrations of CECs determined in the raw manure by the comprehensive methodology were higher than those calculated by adding the concentrations measured in the solid and liquid phases, separately. This was attributed to the loss of CECs adsorbed on fine particles in the suspension during the sample preparation procedure of the liquid-phase. Furthermore, the decrease of residues in the raw manure when this is centrifuged in the farm to yield compost is shown.

Transformation Products of Emerging Pollutants Explored Using Non-Target Screening: Perspective in the Transformation Pathway and Toxicity Mechanism—A Review

The scientific community has increasingly focused on forming transformation products (TPs) from environmental organic pollutants. However, there is still a lot of discussion over how these TPs are generated and how harmful they are to living terrestrial or aquatic organisms. Potential transformation pathways, TP toxicity, and their mechanisms require more investigation. Non-target screening (NTS) via high-resolution mass spectrometry (HRMS) in model organisms to identify TPs and the formation mechanism on various organisms is the focus of this review. Furthermore, uptake, accumulation process, and potential toxicity with their detrimental consequences are summarized in various organisms. Finally, challenges and future research initiatives, such as performing NTS in a model organism, characterizing and quantifying TPs, and evaluating future toxicity studies on TPs, are also included in this review.

Quantification of Teicoplanin Using the HPLC-UV Method for Clinical Applications in Critically Ill Patients in Korea

A high-performance liquid chromatography-ultraviolet detector (HPLC-UV) method has been used to quantify teicoplanin concentrations in human plasma. However, the limited analytical accuracy of previously bioanalytical methods for teicoplanin has given rise to uncertainty due to the use of an external standard. In this study, an internal standard (IS), polymyxin B, was applied to devise a precise, accurate, and feasible HPLC-UV method. The deproteinized plasma sample containing teicoplanin and an IS of acetonitrile was chromatographed on a C18 column with an acidic mobile phase consisting of NaH₂PO₄ buffer and acetonitrile (78:22, v/v) by isocratic elution and detection at 220 nm. The linearity was in the range 7.8–500 mg/L calculated by the ratio of the teicoplanin signal to the IS signal. This analytical method, validated by FDA guidelines with ICH Q2 (R1), was successfully applied to analyze the plasma samples of patients in the intensive care unit for treating serious resistant bacterial infectious diseases, such as those by methicillin-resistant Staphylococcus aureus and Enterococcus faecalis. The methods suggested the potential for use in routine clinical practice for therapeutic drug monitoring of teicoplanin, providing both improved accuracy and a wide range of linearity from lower than steady-state trough concentrations (10 mg/L) to much higher concentrations.

Occurrence, sources and risk assessment of fluoroquinolones in dumpsite soil and sewage sludge from Chennai, India

Soil and sludge are major reservoirs of organic compounds such as fluoroquinolones (FQs) which are broad-spectrum antibacterial agents. Hence, we monitored three major FQs, namely, ciprofloxacin (CIP), norfloxacin (NOR), and ofloxacin (OFL), in surface soil from two major dumpsites and dry and wet sludge from sewage treatment plants in Chennai city. The mean concentration of FQs in soil and sludge samples were 20 μg/g and 26 μg/g, respectively. Nearly 50% of the total FQs in dumpsite soil was contributed by CIP followed by NOR (32%) and OFL (13%). Similarly, CIP was the major contributor in sludge samples followed by NOR and OFL. The concentration of FQs was two folds higher in wet sludge than dry sludge most likely indicating that water solubility of these compounds might play an important role for elevated level of FQs in wet sludge. Solid waste from pharmaceutical industries, households, and sludge from wastewater treatment plants were expected to be the major source of FQs in dumpsite soil. Predicted risk assessment using soil to water migration concentrations via surface run off indicated high risk to aquatic organisms. However, risk quotient (RQ) was found less to earthworm in most of the soil samples. The findings from this study might help in future policies on disposal of household antibiotics in the solid waste stream.

Simultaneous extraction and determination of 45 veterinary antibiotics in swine manure by liquid chromatography-tandem mass spectrometry

A multiresidue method for identification and quantification of 45 veterinary antibiotics (VAs) belonging to 5 different drug classes has been developed, which is the first comprehensive method for pig manure. The proposed method used mixed liquor with methanol: acetonitrile: citrate buffer ratio of 1:1:2 to extract the target VAs from freeze-dried manure. The extracting solution passed through solid-phase extraction (SPE) procedure with Oasis HLB cartridges, which could isolate the target VAs and clean the samples in a single step. After blow-drying and concentrating, the samples were analyzed by ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) in one single injection with a run time of 12 min. The average recovery rates for most of the VAs were in the range of 50-120% with relative standard deviations below 15%. Linearity was studied in the range between 2 and 1000 μg/kg using matrix-matched calibration and pure solvent calibration, to evaluate the matrix effects (MEs). The limits of detection (LDs) and quantification (LQs) were in the range of 0.01-1.54 μg/kg and 0.03-5.13 μg/kg respectively, except for penicillin G. Finally, the proposed method was used to quantify VA residues in real swine manure from three farms with different scales; tetracyclines, sulfonamides, quinolones and macrolides were the most frequently detected compounds.

Development of a new SLE-SPE-HPLC-MS/MS method for the determination of selected antibiotics and their transformation products in anthropogenically altered solid environmental matrices

The presence of antibiotic residues, their bioactive metabolites and other transformation products in the environment may adversely affect the organisms that live in the environment and may also contribute to increasing the antibiotic resistance of bacteria. It is particularly difficult to determine the types of contaminants in solid samples, in particular, those that are anthropogenically changed, e.g., as a result of controlled biochemical processes. Therefore, the aim of this research was to develop of a new method for the determination of twelve antibiotics belonging to different groups, such as penicillins, sulfonamides, tetracyclines, quinolones, imidazoles and cefalosporins, in digested manure and activated sludge samples, which were used as examples of anthropogenically altered environmental solid samples. The analyses were performed using high performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS). The solid-liquid extraction (SLE) method to isolate analytes from digested manure and activated sludge was developed and optimized, the same as clean-up procedure followed by solid phase extraction (SPE). The recovery ranged from 45 to 85%. Finally, the validated method was applied to the determination of the selected antibiotics in manure and activated sludge samples after an anaerobic digestion process.. An additional aim of the study was to verify whether the developed method allows simultaneous detection of transformation products of the studied antibiotics in solid samples. The study showed that by optimizing the analysis conditions, it is possible to simultaneously determine the selected antibiotics and their transformation products (including their epimeric forms), which can significantly improve the ability to control the efficiency of the biological processes used in this area. In practice, this means that the developed methodology may be particularly useful in the context of research and other works related to the anaerobic digestion of activated sludge, manure or other solid substrates of environmental origin.

Applications of Nonconventional Green Extraction Technologies in Process Industries: Challenges, Limitations and Perspectives

This study reviewed five different nonconventional technologies which are aligned with green concepts of product recovery from raw materials on industrial scale, with minimal energy consumption and chemical use. Namely, this study reviewed supercritical fluid extraction (SCFE), pressurized liquid extraction (PLE), microwave-assisted extraction (MAE), ultrasound extraction (UAE) and pulsed electric fields extraction (PEFE). This paper provides an overview of relevant innovative work done in process industries on different plant matrices for functional value-added compounds and byproduct production. A comparison of the five extraction methods showed the supercritical CO2 (SC-CO2) process to be more reliable despite some limitations and challenges in terms of extraction yield and solubility of some bioactive compounds when applied in processing industries. However, these challenges can be solved by using ionic liquids as a trainer or cosolvent to supercritical CO2 during the extraction process. The choice of ionic liquid over organic solvents used to enhance extraction yield and solubility is based on properties such as hydrophobicity, polarity and selectivity in addition to a safe environment.

Cytostatic compounds in sludge and sediment: extraction and determination by a combination of microwave-assisted extraction and UHPLC-MS/MS

Cytostatic compounds are an important group of micro-pollutants since they are used to kill cells or stop cell division. For this reason, they are also considered mutagenic. Several cytostatic compounds have been detected in hospital effluents, in the influents and effluents of wastewater treatment plants and even in river water. However, their detection in solid matrices is very scarce. In this work, we have developed a new procedure based on microwave-assisted extraction (MAE) for the extraction of cytostatic compounds from sludge and sediment before determination by ultra-high-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). To develop this procedure, we have chosen a group of eight widely used cytostatic compounds and carried out a systematic experimental design to optimize the extraction conditions. Under these optimal conditions, the studied cytostatic compounds are extracted with good sensitivity, with recoveries ranging from 65 to 122% in sludge and recoveries varying between 49 and 109% in sediment, with the exception of etoposide, which has a lower recovery from these types of samples. The limits of detection were from 0.42 to 79.8 ng g^-1 in sludge and from 0.10 to 87.5 ng g^-1 in sediment. Intraday and interday relative standard deviations (RSDs) were below 15% and 18%, respectively, in both matrices at the tested concentrations. The total procedure was applied to samples of sludge taken from the main wastewater treatment plant (WWTP) of the island of Gran Canaria (Spain) and for sediment samples obtained close to the marine outfalls of different wastewater treatment plants for the same island. Graphical abstract.

Concentration and reduction of antibiotic residues in selected wastewater treatment plants and receiving waterbodies in Durban, South Africa

In the province of KwaZulu-Natal, South Africa the incidence of resistant tuberculosis, upper respiratory tract diseases as well as diarrhoeal and parasitic infections is high. Treatment of these diseases with antibiotics is partly reflected by the excretion of the respective antibiotics and their subsequent occurrence in wastewater. Their quantitative reduction in wastewater treatment reflects their potential environmental as well as human impact, the latter due to the use of the recipient water for domestic purposes and for irrigation. Information of the occurrence and reduction of different classes of antibiotics in wastewater treatment is sparse, especially the particle bound fraction of these. Due to this, analyses of aqueous and particle bound antibiotics in untreated wastewater of four selected wastewater treatment plants (WWTPs) and their receiving water bodies was carried out in Durban, South Africa. The treatment step especially considered was the biological one, represented by activated sludge and trickling filters. The treatment further included secondary clarifiers and final chlorine disinfection. Composite samples were collected during the period February 2017 to May 2017 and analysed with online solid phase extraction - high performance liquid chromatography mass spectrometry (SPE-HPLC-MS). For the 13 assessed antibiotics, the limit of detection (LOD) and the limit of quantification (LOQ) ranged from 0.07 to 0.33 ng L^-1 and 0.23 to 1.09 ng L^-1 respectively, while the total percentage recovery was in the range of 51 to 111%. The percentage of individual antibiotics bound to the particulate fraction normally lost by sample (influent) filtration, if not analysed in parallel, was in the range of 2.6%-97.3% (n = 32). In this fraction (sludge from centrifuge sample), the concentration of bound antibiotics of all the target antibiotics were detected in the influent of all WWTP in concentration ranges between 1.3 ng L^-1 (Azithromycin; AZI) to 81,748 ng L^-1 (Ciprofloxacin; CIP). The antibiotics with the highest median concentrations in receiving water bodies of the respective WWTP were; Sulfamethoxazole; SUL (239 ng L^-1) WWTP "K", Ciprofloxacin; CIP (708 ng L^-1) WWTP "S" and Albendazole; ALB (325 ng L^-1 and 683 ng L^-1) WWTP "P" and "I" respectively. The overall percentage removal efficiency for the four WWTPs ranged from 21% to 100%. The biological treatment steps, activated sludge and trickling filters, were effective in removing antibiotics especially with the trickling filter and the impact of the sedimentation stage after activated sludge treatment.

Sensitive and multiplexed detection of antibiotics using a suspension array platform based on silica-agarose hybrid microbeads

A multiplex suspension array detection platform of antibiotics has been developed based on silica-agarose hybrid microbeads (SAHMs). Chloramphenicol (CAP), sulfamethoxazole (SMX), metronidazole (MTZ) and amoxicillin (AMX) were employed as model analytes. The antigens (the antibiotics conjugated with BSA) were immobilized on the surface of four different types of SAHMs. Based on an indirect competition immunoassay, the selected antibiotics are detected through the competition of the specific monoclonal antibodies between the multiple antibiotics and the antigens. Due to high resistance to nonspecific protein absorption of SAHMs, the proposed method exhibited wide linear ranges (0.4˜72.9 ng/mL for CAP, 2.0˜108.5 ng/mL for SMX, 2.6˜142.2 ng/mL for MTZ, 1.0˜63.3 ng/mL for AMX) and low detection limits of 0.09˜0.8 ng/mL. Recoveries for spiked tap water samples were from 82% to 113%, with relative standard deviation lower than 14%, demonstrating the accuracy of the measurements performed with the developed method. This work offered a high-throughput, flexible and accurate tool, which provides a good platform for simultaneous detection of antibiotics.

A pressurized liquid extraction approach followed by standard addition method and UPLC-MS/MS for a fast multiclass determination of antibiotics in a complex matrix

In this work a fast analytical method for the determination of macrolides, tetracyclines and fluoroquinolones in a compost originating from a mixture of sewage sludge, palm waste and grass was developed by ultra-high performance liquid chromatography coupled to mass spectrometry (U-HPLC/MS). Antibiotics were extracted from compost by using the accelerated solvent extraction (ASE). The chromatographic separation was carried out on a T3 Cortecs C18 column using a mobile phase gradient mixture of water acidified with 1% of formic acid and acetonitrile. Recoveries of 24-30%, 53-93%, 33-57%, 69-135% and 100-171% were obtained for roxithromycin (ROX), chlortetracycline (CTC), oxytetracycline (OTC), enrofloxacin (ENR) and ciprofloxacin (CIP), respectively. As the most part of antibiotics showed significant matrix effect (ME), the method was validated using the standard addition method (SAM) to correct the observed ME. Instrumental variation, of LC/MS system, showed that 93.75% of the relative standard deviation (RSD %) are below 15%, although the organic load of extracts. This analytical method was applied to assess the fate of antibiotics during composting. Two composting experiments were conducted separately after spiking sludge at 2 different concentrations levels. The resulting elimination rates were of 52-76, 69-100, 100 and 24-50% for ROX, CTC, OTC and CIP, respectively. These results suggest that composting process contributes to the removal of residuals concentrations of macrolides and tetracyclines while the fluoroquinolones persist in the final compost product.

Sample as solid support in MSPD: A new possibility for determination of pharmaceuticals, personal care and degradation products in sewage sludge

A method based on matrix-solid phase dispersion (MSPD), focused on the principles of green analytical chemistry, aimed at the use of alternative solid supports and less toxic solvents, was developed for the simultaneous determination of 19 pharmaceuticals, 4 personal care products (PPCPs) and 4 degradation products in sewage sludge samples. Higher recoveries were achieved when 2 g sample was macerated for 5 min in a glass mortar, transferred to a centrifuge tube, and 1 min vortex agitation with 5 mL methanol. The performance of the method was evaluated through linearity, recovery, precision (intra-day), method detection and quantification limits (MDL and MQL) and matrix effect. The calibration curves prepared in methanol and in the matrix extract showed a correlation coefficient ranging from 0.98 to 0.99. MQL values ranged from 1.25 to 1250 ng g^-1. Recoveries between 50 and 120% were reached with RSDs lower than 20% for most compounds. The method presented low and medium matrix effects for most analytes. This method was successfully applied to real samples and of the 27 compounds determined, amitriptyline, carbamazepine, diclofenac, haloperidol, ketoconazole, miconazole, albendazole, mebendazole, thiabendazole, triclosan and triclocarban were detected in concentrations between 2.5 and 5400 ng g^-1.

Analytical and legislative challenges of sewage sludge processing and management

ABSTRACT

This article presents the most popular methods of sewage sludge management and analytical techniques which could be a powerful tool in designing new sewage sludge management methods. Chemical analysis is also described as a vital point at the subsequent stages of technological processes control and sewage sludge quality assessment. It is also an instrument essential to maintaining control of processed sewage sludge introduced to the environment as ready-to-use materials. The sludge management method is conditioned by the compliance with legal acts concerning sludge management. The most important of these contain information regarding allowable concentrations of pollutants which can be released into the environment, and the most important declarations concerning sewage sludge management. Various analytical techniques and preparation methods that can be used during the monitoring of the managed and processed sewage sludge are described. The most important are chromatographic techniques, methods based on inductively coupled plasma, and mass spectrometry based methods.

GRAPHICAL ABSTRACT

Highly-sensitive detection of eight typical fluoroquinolone antibiotics by capillary electrophoresis-mass spectroscopy coupled with immunoaffinity extraction

An off-line procedure, immunoaffinity extraction (IAE), followed by capillary electrophoresis-mass spectroscopy (CE-MS) has been developed for the simultaneous determination of eight typical FQs in environmental water samples.

Liquid chromatography quadrupole time-of-flight mass spectrometry identification and determination of tri- and hexaaryl chloro imidazoles in sewage sludge

The identification and further quantification of 2-chloro-triarylimidazole (o-Cl-TAI) and its dimer (o-DCl-HABI) in sludge from a sewage treatment plant (STP) is reported for the first time. Liquid chromatography (LC) quadrupole time-of-flight (QTOF) mass spectrometry (MS) was used as analytical technique during screening and determination steps. Pollutants were identified following a post-run search strategy, applying the chlorine mass filter, and characterized by their accurate MS and product ion scan spectra. Finally, their identities were confirmed with authentic standards. The species (o-Cl-TAI) has been rated as potentially genotoxic and carcinogenic for mice and rats. Effects of sample preparation in the stability and the extraction efficiency of both compounds are discussed. Under final conditions, they were extracted from freeze-dried samples (0.5 g of sludge or biosolids dispersed with 2 g of C₁₈ and packed into a polypropylene syringe) with 20 ml of methanol, which also flowed through a clean-up layer of Florisil and PSA sorbents (0.5 g each). This method attained quantitative extraction yields and limits of quantification between 4 and 10 ng/g. The pollutants o-Cl-TAI and o-DCl-HABI were ubiquitous in sludge and biosolids obtained in consecutive years from the investigated STP. Their concentrations varied from 0.02 to more than 13 μg/g (freeze-dried sample). Copyright © 2016 John Wiley & Sons, Ltd.

Behaviour of emerging contaminants in sewage sludge after anaerobic digestion

Nowadays, there is an increasing concern over the presence of contaminants in the aquatic environment, where they can be introduced from wastewater after their incomplete removal in the treatment plants. In this work, degradation of selected emerging pollutants in the aqueous and solid phases of sewage sludge has been investigated after anaerobic digestion using two different digesters: mesophilic and thermophilic. Initially, sludge samples were screened by ultra-high-performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry (UHPLC-QTOF MS) for identification of emerging contaminants in the samples. In a second step, a target quantitative method based on LC coupled to tandem MS was applied for selected pollutants identified in the previous screening. The behaviour of the compounds under anaerobic conditions was studied estimating the degradation efficiency and distribution of compounds between both sludge phases. Irbesartan and benzoylecgonine seemed to be notably degraded in both phases of the sludge. Venlafaxine showed a significant concentration decrease in the aqueous phase in parallel to an increase in the solid phase. The majority of the compounds showed an increase of their concentrations in both phases after the digestion. Concentrations in the solid phase were commonly higher than in the aqueous for most contaminants, indicating that they were preferentially adsorbed onto the solid particles.

Quantitative mass spectrometry methods for pharmaceutical analysis

Quantitative pharmaceutical analysis is nowadays frequently executed using mass spectrometry. Electrospray ionization coupled to a (hybrid) triple quadrupole mass spectrometer is generally used in combination with solid-phase extraction and liquid chromatography. Furthermore, isotopically labelled standards are often used to correct for ion suppression. The challenges in producing sensitive but reliable quantitative data depend on the instrumentation, sample preparation and hyphenated techniques. In this contribution, different approaches to enhance the ionization efficiencies using modified source geometries and improved ion guidance are provided. Furthermore, possibilities to minimize, assess and correct for matrix interferences caused by co-eluting substances are described. With the focus on pharmaceuticals in the environment and bioanalysis, different separation techniques, trends in liquid chromatography and sample preparation methods to minimize matrix effects and increase sensitivity are discussed. Although highly sensitive methods are generally aimed for to provide automated multi-residue analysis, (less sensitive) miniaturized set-ups have a great potential due to their ability for in-field usage.This article is part of the themed issue 'Quantitative mass spectrometry'.

Analytical methodologies based on LC-MS/MS for monitoring selected emerging compounds in liquid and solid phases of the sewage sludge

In this work, two analytical methodologies based on liquid chromatography coupled to tandem mass spectrometry (LC–MS/MS) were developed for quantification of emerging pollutants identified in sewage sludge after a previous wide-scope screening. The target list included 13 emerging contaminants (EC): thiabendazole, acesulfame, fenofibric acid, valsartan, irbesartan, salicylic acid, diclofenac, carbamazepine, 4-aminoantipyrine (4-AA), 4-acetyl aminoantipyrine (4-AAA), 4-formyl aminoantipyrine (4-FAA), venlafaxine and benzoylecgonine. The aqueous and solid phases of the sewage sludge were analyzed making use of Solid-Phase Extraction (SPE) and UltraSonic Extraction (USE) for sample treatment, respectively. The methods were validated at three concentration levels: 0.2, 2 and 20 μg L⁻¹ for the aqueous phase, and 50, 500 and 2000 μg kg⁻¹ for the solid phase of the sludge. In general, the method was satisfactorily validated, showing good recoveries (70–120%) and precision (RSD < 20%). Regarding the limit of quantification (LOQ), it was below 0.1 μg L⁻¹ in the aqueous phase and below 50 μg kg⁻¹ in the solid phase for the majority of the analytes. The method applicability was tested by analysis of samples from a wider study on degradation of emerging pollutants in sewage sludge under anaerobic digestion.

The key benefits of these methodologies are:

• SPE and USE are appropriate sample procedures to extract selected emerging contaminants from the aqueous phase of the sewage sludge and the solid residue.

• LC–MS/MS is highly suitable for determining emerging contaminants in both sludge phases.

• Up to our knowledge, the main metabolites of dipyrone had not been studied before in sewage sludge.

Development and comparison of four methods for the extraction of antibiotics from a vegetative matrix

Studies have shown the potential for antibiotic uptake into food crops from irrigation water and soils containing pharmaceuticals. The objective of the present study was to develop and compare methods quantifying uptake of antibiotics in food crops. Four methods were evaluated: freeze-and-thaw cell lysing, mechanical maceration, tissue sonication, and microwave-assisted solvent extraction. Four antibiotics (ciprofloxacin, lincomycin, oxytetracycline, and sulfamethoxazole) were tested representing 4 classes of antibiotics. The methods were evaluated based on method detection limits, analyte recoveries, and sample preparation time. The 2 most viable methods, freeze-and-thaw lysing and mechanical maceration, were used on replicate lettuce (Lactuca sativa) samples grown using irrigation water spiked with 3 of the antibiotic contaminants. Only lincomycin and sulfamethoxazole were detected in lettuce samples at concentrations as high as 1757 ng/g and 425 ng/g, with detection limits of 57 ng/g and 35 ng/g, respectively. Freeze-and-thaw cell lysing provided the highest level of extraction efficiency on environmental samples and required the least amount of sample preparation while providing adequate detection limits and reproducible analyte recovery.

Generation and characterization of quinolone-specific DNA aptamers suitable for water monitoring

Quinolones are antibiotics that are accredited in human and veterinary medicine but are regularly used in high quantities also in industrial livestock farming. Since these compounds are often only incompletely metabolized, significant amounts contaminate the aquatic environment and negatively impact on a variety of different ecosystems. Although there is increasing awareness of problems caused by pharmaceutical pollution, available methods for the detection and elimination of numerous pharmaceutical residues are currently inefficient or expensive. While this also applies to antibiotics that may lead to multi-drug resistance in pathogenic bacteria, aptamer-based technologies potentially offer alternative approaches for sensitive and efficient monitoring of pharmaceutical micropollutants. Using the Capture-SELEX procedure, we here describe the selection of an aptamer pool with enhanced binding qualities for fluoroquinolones, a widely used group of antibiotics in both human and veterinary medicine. The selected aptamers were shown to detect various quinolones with high specificity, while specific binding activities to structurally unrelated drugs were not detectable. The quinolone-specific aptamers bound to ofloxacin, one of the most frequently prescribed fluoroquinolone, with high affinity (KD=0.1-56.9 nM). The functionality of quinolone-specific aptamers in real water samples was demonstrated in local tap water and in effluents of sewage plants. Together, our data suggest that these aptamers may be applicable as molecular receptors in biosensors or as catcher molecules in filter systems for improved monitoring and treatment of polluted water.

Determination of sulfonamide antibiotics and metabolites in liver, muscle and kidney samples by pressurized liquid extraction or ultrasound-assisted extraction followed by liquid chromatography-quadrupole linear ion trap-tandem mass spectrometry (HPLC-QqLIT-MS/MS)

Sulfonamides are widely used in human and veterinary medicine. The presence of sulfonamides residues in food is an issue of great concern. Throughout the present work, a method for the targeted analysis of 16 sulfonamides and metabolites residue in liver of several species has been developed and validated. Extraction and clean-up has been statistically optimized using central composite design experiments. Two extraction methods have been developed, validated and compared: i) pressurized liquid extraction, in which samples were defatted with hexane and subsequently extracted with acetonitrile and ii) ultrasound-assisted extraction with acetonitrile and further liquid-liquid extraction with hexane. Extracts have been analyzed by liquid chromatography-quadrupole linear ion trap-tandem mass spectrometry. Validation procedure has been based on the Commission Decision 2002/657/EC and included the assessment of parameters such as decision limit (CCα), detection capability (CCβ), sensitivity, selectivity, accuracy and precision. Method׳s performance has been satisfactory, with CCα values within the range of 111.2-161.4 µg kg(-1), limits of detection of 10 µg kg(-1) and accuracy values around 100% for all compounds.

Distribution and risk assessment of quinolone antibiotics in the soils from organic vegetable farms of a subtropical city, Southern China

Organic fertilizer or manure containing antibiotics has been widely used in organic farms, but the distribution and potential impacts of antibiotics to the local environment are not well understood. In this study, four quinolone antibiotics in soil samples (n=69) from five organic vegetable farms in a subtropical city, Southern China, were analyzed using high performance liquid chromatography-tandem mass spectrometry. Our results indicated that quinolone compounds were ubiquitous in soil samples (detection frequency>97% for all compounds), and their concentrations ranged from not detectable to 42.0 μg/kg. Among the targets, enrofloxacin (ENR) was the dominant compound, followed by ciprofloxacin (CIP) and norfloxacin (NOR). The average total concentrations of four compounds in the soils were affected by vegetable types and species cultivated, decreasing in the order of fruit>rhizome>leaf vegetables. Moreover, the average concentrations of quinolone compounds (except ENR) in open-field soils were higher than those in greenhouse soils. The concentrations of quinolone antibiotics in this study were lower than the ecotoxic effect trigger value (100 μg/kg) proposed by the Veterinary Medicine International Coordination commission. Risk assessment based on the calculated risk quotients indicated that NOR, CIP, and ENR posed mainly medium to low risks to bacteria.