Hydrogen peroxide biosensor based on microperoxidase-11 immobilized on flexible MWCNTs-BC nanocomposite film

Nanomaterial-Based Electrochemical Nanodiagnostics for Human and Gut Metabolites Diagnostics: Recent Advances and Challenges

Metabolites are the intermediatory products of metabolic processes catalyzed by numerous enzymes found inside the cells. Detecting clinically relevant metabolites is important to understand their physiological and biological functions along with the evolving medical diagnostics. Rapid advances in detecting the tiny metabolites such as biomarkers that signify disease hallmarks have an immense need for high-performance identifying techniques. Low concentrations are found in biological fluids because the metabolites are difficult to dissolve in an aqueous medium. Therefore, the selective and sensitive study of metabolites as biomarkers in biological fluids is problematic. The different non-electrochemical and conventional methods need a long time of analysis, long sampling, high maintenance costs, and costly instrumentation. Hence, employing electrochemical techniques in clinical examination could efficiently meet the requirements of fully automated, inexpensive, specific, and quick means of biomarker detection. The electrochemical methods are broadly utilized in several emerging and established technologies, and electrochemical biosensors are employed to detect different metabolites. This review describes the advancement in electrochemical sensors developed for clinically associated human metabolites, including glucose, lactose, uric acid, urea, cholesterol, etc., and gut metabolites such as TMAO, TMA, and indole derivatives. Different sensing techniques are evaluated for their potential to achieve relevant degrees of multiplexing, specificity, and sensitivity limits. Moreover, we have also focused on the opportunities and remaining challenges for integrating the electrochemical sensor into the point-of-care (POC) devices.

Cellulose-based Biosensor for Bio-molecules Detection in Medical Diagnosis: A Mini-Review

Background::

Biosensors are widely applied for the detection of bio-molecules in blood glucose , cholesterol, and gene. Cellulose as the most dominating natural polymer has attracted more and more interest, especially in the field of medicine such as advanced medical diagnosis. Cellulose could endow biosensors with improved biocompatibility, biodegradability and nontoxicity, which could help in medical diagnosis. This mini-review summarizes the current development of cellulose-based biosensors as well as their applications in medical diagnosis in recent years.

Methods:

After reviewing recent years’ publications we can say that, there are several kinds of cellulose used in biosensors including different cellulose derivatives, bacterial cellulose and nanocellulose. Different types of cellulose-based biosensors, such as membrane, nano-cellulose and others were briefly described in addition to the detection principle. Cellulose-based biosensors were summarized as in the previous papers. The description of various methods used for preparing cellulose-based biosensors was also provided.

Results:

Cellulose and its derivatives with their unique chemical structure proved to be versatile materials providing a good platform for achieving immobilizing bioactive molecules in biosensors. These cellulose-based biosensors possess various desirable properties such as accuracy, sensitivity, convenience, low cost and fast response. Among them, cellulose paper-based biosensors have the advantages of low cost and easy operation. Nano-cellulose has unique properties such as a large aspect ratio, good dispersing ability and high absorption capacity.

Conclusion:

Cellulose displays a promising application in biosensors which could be used to detect different bio-molecules such as glucose, lactate, urea, gene, cell, amino acid, cholesterol, protein and hydroquinone. In future, the attention will be focused on designing miniaturized, multifunctional, intelligent and integrated biosensors. Creation of low cost and environmentally friendly biosensors is also very important.

Recent uses of carbon nanotubes & gold nanoparticles in electrochemistry with application in biosensing: A review

The innovation of nanoparticles assumes a critical part of encouraging and giving open doors and conceivable outcomes to the headway of new era devices utilized as a part of biosensing. The focused on the quick and legitimate detecting of specific biomolecules using functionalized gold nanoparticles (Au NPs), and carbon nanotubes (CNTs) has turned into a noteworthy research enthusiasm for the most recent decade. Sensors created with gold nanoparticles or carbon nanotubes or in some cases by utilizing both are relied upon to change the very establishments of detecting and distinguishing various analytes. In this review, we will examine the current utilization of functionalized AuNPs and CNTs with other synthetic mixes for the creation of biosensor prompting to the location of particular analytes with low discovery cutoff and quick reaction.

Totally synthetic microperoxidase-11

A totally synthetic microperoxidase-11 (MP-11) is reported. Accordingly, the undecapeptide (VQKCAQCHTVE) was synthesized by solid-phase peptide synthesis followed by the thiol-ene click reaction with haemin for reconstitution. High-speed atomic force microscopy measurement conducted in water confirmed the protein reconstitution by visualizing the morphological differences as animated molecular images. The synthetic MP-11 showed a considerable magnitude of catalytic activity (27%) against the natural MP-11 in the oxidation of 3,3',5,5'-tetramethylbenzidine by hydrogen peroxide, whereas it showed very low (2.7%) activity of a synthetic variant with a point mutation (VQKCAQC M TVE, H8M). Slab waveguide spectroscopic measurements revealed that the ferrous/ferric redox reaction occurred by the direct electron transfer with specific spectral changes. Indeed, if hydrogen peroxide existed in the solution phase, the peroxidase-modified electrode showed catalytic current-voltage behaviour regardless of whether it was prepared using natural MP-11 or the synthetic MP-11. If a substrate recycling reaction was assumed, computer simulation well reproduced the experimental curves to give a global set of electrocatalytic reaction parameters. In any of the experiments, the synthetic MP-11 and natural MP-11 gave almost identical results. Our approach will be a convenient means of preparing MP-11, as well as its mutants, that does not rely on nature.

Structure and Catalysis of Fe(III) and Cu(II) Microperoxidase-11 Interacting with the Positively Charged Interfaces of Lipids

Numerous applications have been described for microperoxidases (MPs) such as in photoreceptors, sensing, drugs, and hydrogen evolution. The last application was obtained by replacing Fe(III), the native central metal, by cobalt ion and inspired part of the present study. Here, the Fe(III) of MP-11 was replaced by Cu(II) that is also a stable redox state in aerated medium, and the structure and activity of both MPs were modulated by the interaction with the positively charged interfaces of lipids. Comparative spectroscopic characterization of Fe(III) and Cu(II)MP-11 in the studied media demonstrated the presence of high and low spin species with axial distortion. The association of the Fe(III)MP-11 with CTAB and Cu(II)MP-11 with DODAB affected the colloidal stability of the surfactants that was recovered by heating. This result is consistent with hydrophobic interactions of MPs with DODAB vesicles and CTAB micelles. The hydrophobic interactions decreased the heme accessibility to substrates and the Fe(III) MP-11catalytic efficiency. Cu(II)MP-11 challenged by peroxides exhibited a cyclic Cu(II)/Cu(I) interconversion mechanism that is suggestive of a mimetic Cu/ZnSOD (superoxide dismutase) activity against peroxides. Hydrogen peroxide-activated Cu(II)MP-11 converted Amplex Red^® to dihydroresofurin. This study opens more possibilities for technological applications of MPs.

Microperoxidase-11/metal–organic framework/macroporous carbon for detecting hydrogen peroxide

Schematic illustrating of the fabrication and sensing principle of the newly develpoed H₂O₂ biosensor.

Nanopaper as an Optical Sensing Platform

Bacterial cellulose nanopaper (BC) is a multifunctional material known for numerous desirable properties: sustainability, biocompatibility, biodegradability, optical transparency, thermal properties, flexibility, high mechanical strength, hydrophilicity, high porosity, broad chemical-modification capabilities and high surface area. Herein, we report various nanopaper-based optical sensing platforms and describe how they can be tuned, using nanomaterials, to exhibit plasmonic or photoluminescent properties that can be exploited for sensing applications. We also describe several nanopaper configurations, including cuvettes, plates and spots that we printed or punched on BC. The platforms include a colorimetric-based sensor based on nanopaper containing embedded silver and gold nanoparticles; a photoluminescent-based sensor, comprising CdSe@ZnS quantum dots conjugated to nanopaper; and a potential up-conversion sensing platform constructed from nanopaper functionalized with NaYF4:Yb(3+)@Er(3+)&SiO2 nanoparticles. We have explored modulation of the plasmonic or photoluminescent properties of these platforms using various model biologically relevant analytes. Moreover, we prove that BC is and advantageous preconcentration platform that facilitates the analysis of small volumes of optically active materials (∼4 μL). We are confident that these platforms will pave the way to optical (bio)sensors or theranostic devices that are simple, transparent, flexible, disposable, lightweight, miniaturized and perhaps wearable.

Co9S8 hollow spheres for enhanced electrochemical detection of hydrogen peroxide

This work reports on an experimental investigation of Co9S8 hollow spheres with excellent interfacial charge transfer ability for the electrochemical detection of hydrogen peroxide and glucose in alkaline environment. The result reveals that the Co9S8 hollow spheres exhibit excellent electrocatalytic activity for the reduction of hydrogen peroxide. An electrochemical sensor based on Co9S8 can be further realized, exhibiting a linear response range from 0.0001 to 11.11mM for hydrogen peroxide with a low detection limit of 0.02μM, and a high sensitivity of 267.2mA mol(-1)cm(-2), which is one of the highest values among the non-enzymatic sensors based on inorganic oxides. The Co9S8 sensor also exhibits good response toward glucose at different concentrations. These results demonstrate that the as-prepared Co9S8 hollow spheres have a potential application in the development of sensors for enzyme-free detection of H2O2 and glucose.