Highly sensitive colorimetric detection of lead using maleic acid functionalized gold nanoparticles

Determination of the Localized Surface Plasmon Resonance Alteration of AgNPs via Multiwavelength Evanescent Scattering Microscopy for Pb(II) Detection

We developed multiwavelength evanescent scattering microscopy (MWESM), which can acquire plasmonic nanoparticle images at the particle level using the evanescent field as the incident source and distinguish different LSPR (localized surface plasmon resonance) spectral peaks among four wavelengths. Our microscope could be easily and simply built by modifying a commercial total internal reflection fluorescence microscope (TIRFM) with the substitution of a beamsplitter and the addition of a semicircular stop. The ultrathin depth of illumination and rejection of the reflected incident source together contribute to the high sensitivity and contrast of single nanoparticle imaging. We first validated the capability of our imaging system in distinguishing plasmonic nanoparticles bearing different LSPR spectral peaks, and the results were consistent with the scattering spectra results of hyperspectral imaging. Moreover, we demonstrated high imaging quality from the aspects of the signal/noise ratio and point spread function of the single-particle images. Meaningfully, the system can be utilized in rapidly determining the concentration of toxic lead ions in environmental and biological samples with good linearity and sensitivity, based on single-particle evanescent scattering imaging through the detection of the alteration of the LSPR of silver nanoparticles. This system holds the potential to advance the field of nanoparticle imaging and foster the application of nanomaterials as sensors.

Sensing lead ions in water: a comprehensive review on strategies and sensor materials

It is well-known fact that elevated lead ions (Pb2+), the third most toxic among heavy metal ions in aqueous systems, pose a threat to human health and aquatic ecosystems when they exceed permissible limits. Pb2+ is commonly found in industrial waste and fertilizers, contaminating water sources and subsequently entering the human body, causing various adverse health conditions. Unlike being expelled, Pb2+ accumulates within the body, posing potential health risks. The harmful impact of presence of Pb2+ in water have prompted researchers to diligently work toward maintaining water quality. Recognizing the importance of Pb2+, this review article makes a sincere and effective effort to address the issues associated with Pb2+. This overview article gives insights into various sensing approaches to detect Pb2+ in water using different sensing materials, including 2-dimensional materials, thiols, quantum dots, and polymers. Herein, different sensing approaches such as electrochemical, optical, field effect transistor-based, micro-electromechanical system-based, and chemi resistive are thoroughly explained. Field effect transistor-based and chemiresistive work on similar principles and are compared on the basis of their fabrication processes and sensing capabilities. In conclusion, future directions for chemiresistive sensors in Pb2+ detection are proposed, emphasizing their simplicity, portability, straightforward functionality, and ease of fabrication. Notably, it sheds light on various thiol and ligand compounds and coupling strategies utilized in Pb2+ detection. This comprehensive study is expected to benefit individuals engaged in Pb2+ detection.

Ion imprinted differential modulation system based on enhanced optic-fiber evanescent wave for sensitive and label-free detection of trace nickel ions

An optical system with low cost monitoring, high sensitivity, strong selectivity and much lower nickel ion (Ni2+) content in tap water than the World Health Organization (WHO) standard (1.19 μM) has been prepared by a simple strategy. This proposed ion-imprinted differential modulation system is based on the Bragg grating (FBG) and microfiber interferometer structure, and the interferometer sensing surface is coated with a polydopamine (PDA)/graphene oxide (GO) film to enhance its sensitivity. Combined with the ion imprinting technique, the microfiber interferometer sensor sensitivity can reach 0.32 nm/nM with the detection limit of 0.66 nM in the low concentration range (Ni2+ concentration range is 0 nM-100 nM). The experiment not only studies the principle of microfiber interferometer and FBG and their refractive index and temperature performance, but also shows that the FBG power change has a good fitting relationship with wavelength change. In addition, this system performance by the amount of power difference rather than the amount of wavelength shift, which significantly saves on the high cost weight, and size associated with the use of spectral analyzers in traditional inspection systems. This study provides a novel and easy method to develop new sensors with higher comprehensive performance.

Recent advancements in nanomaterial based optical detection of food additives: a review

Food additives have become a critical component in the food industry. They are employed as preservatives to decelerate the negative effects of environmental and microbial factors on food quality. Currently, food additives are used for a variety of purposes, including colorants, flavor enhancers, nutritional supplements, etc., owing to improvements in the food industry. Since the usage of food additives has increased dramatically, the efficient monitoring of their acceptable levels in food products is quite necessary to mitigate the problems associated with their inappropriate use. The traditional methods used for detecting food additives are generally based on standard spectroscopic and chromatographic techniques. However, these analytical techniques are limited by their high instrumentation cost and time-consuming procedures. The emerging field of nanotechnology has enabled the development of highly sensitive and specific sensors to analyze food additives in a rapid manner. The current article emphasizes the need to detect various food additives owing to their potential negative effects on humans, animals, and the environment. In this article, the role of nanomaterials in the optical sensing of food additives has been discussed owing to their high accuracy, ease-of-use, and excellent sensitivity. The applications of nanosensors for the detection of various food additives have been elaborated with examples. The current article will assist policymakers in developing new rules and regulations to mitigate the adverse effects of toxic food additives on humans and the environment. In addition, the prospects of nanosensors for the optical detection of food additives at a commercial scale have been discussed to combat their irrational use in the food industry.

Localized surface plasmon resonance shift of biosynthesized and functionalized quasi-spherical gold nanoparticle systems

Rapid and more environment-friendly means of gold nanoparticle synthesis is necessary in many applications, as in ion detection. Leaf extracts have become effective and economical reducing agents for gold nanoparticle formation, however, effects of extract combinations have not been thoroughly investigated. With the exploitation of combined extract effects, gold nanoparticles were synthesized then functionalized and investigated to produce selected nanoparticle systems which are capable of detecting aqueous lead(ii) ions with minimum detection limits of 10-11 ppm. The measured localized surface plasmon resonance absorption peaks of the gold nanoparticles were 541-800 nm for the synthesis and 549 nm for the functionalization. The diameters of different gold nanoparticle systems were 17-37 nm. These were mostly quasi-spherical in morphology with some rod-, triangular-, and hexagonal plate-like particles. The biosynthesis used polyphenols and acids present in the extracts in the reduction of gold ions into gold nanoparticles, and in the nanoparticle capping and stabilization. Functionalization replaced the capping compounds with alliin, S-allylcysteine, allicin, and ajoene. Gold nanoparticle stability in aqueous systems was verified for two weeks up to five months. The investigations concluded the practicability of the gold nanoparticles in lead(ii) ion detection with selectivity initially verified for other divalent cations.

Quantitative and qualitative analyses of metal ions in food and water by using a multicolor sensor array and chemometrics

Rapid and accurate detection of toxic metal ions is the key to combating food contamination and environmental pollution. In sensor arrays, gold nanoparticles play a crucial role in monitoring metal ions based on surface plasmon resonance. However, identifying metal ions with unknown concentrations in a complex system through this assay is difficult because of its monotonous color change and weak anti-interference ability. To overcome these limitations, a sensitive, flexible, low-cost, and multicolor sensor array was designed herein. The applicability of the sensor array for the qualitative and quantitative analyses of metal ions in food and water was also verified. The developed sensor array could classify 14 metal ions (Cu²⁺, Fe²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Cr³⁺, Co²⁺, Ba²⁺, K⁺, Tl⁺, Pb²⁺, and Hg²⁺) of unknown concentration with an accuracy of 100%. In addition, partial least squares models were established to quantify Tl⁺, Pb²⁺, and Hg²⁺ in water and rice samples, with square correlation coefficients (R²) of 0.9991, 0.9742, and 0.9731, respectively. This method can be used for accurate quantitative and qualitative analyses of heavy metal ions in water and food.

Recent advances in nanomaterials-based optical sensors for detection of various biomarkers (inorganic species, organic and biomolecules)

This review briefly emphasizes the different detection approaches (electrochemical sensors, chemiluminescence, surface-enhanced Raman scattering), functional nanostructure materials (quantum dots, metal nanoparticles, metal nanoclusters, magnetic nanomaterials, metal oxide nanoparticles, polymer-based nanomaterials, and carbonaceous nanomaterials) and detection mechanisms. Further, this review emphasis on the integration of functional nanomaterials with optical spectroscopic techniques for the identification of various biomarkers (nucleic acids, glucose, uric acid, oxytocin, dopamine, ascorbic acid, bilirubin, spermine, serotonin, thiocyanate, Pb²⁺ , Cu²⁺ , Hg²⁺ , F^- , peptides, and cancer biomarkers (mucin 1, prostate specific antigen, carcinoembryonic antigen, CA15-3, human epidermal growth factor receptor 2, C-reactive protein, and interleukin-6). Analytical characteristics of nanomaterials-based optical sensors are summarized in Tables, providing the insights of nanomaterials-based optical sensors for biomarkers detection. Finally, the opportunities and challenges of nanomaterials-based optical analytical approaches for the detection of various biomarkers (inorganic, organic, biomolecules, peptides and proteins) are discussed.

Gold nanoparticle-based optical nanosensors for food and health safety monitoring: recent advances and future perspectives

Modern society has been facing serious health-related problems including food safety, diseases and illness. Hence, it is urgent to develop analysis methods for the detection and control of food contaminants, disease biomarkers and pathogens. As the traditional instrumental methods have several disadvantages, including being time consuming, and having high cost and laborious procedures, optical nanosensors have emerged as promising alternative or complementary approaches to those traditional ones. With the advantages of simple preparation, high surface-to-volume ratio, excellent biocompatibility, and especially, unique optical properties, gold nanoparticles (AuNPs) have been demonstrated as excellent transducers for optical sensing systems. Herein, we provide an overview of the synthesis of AuNPs and their excellent optical properties that are ideal for the development of optical nanosensors based on local surface plasmon resonance (LSPR), colorimetry, fluorescence resonance energy transfer (FRET), and surface-enhanced Raman scattering (SERS) phenomena. We also review the sensing strategies and their mechanisms, as well as summarizing the recent advances in the monitoring of food contaminants, disease biomarkers and pathogens using developed AuNP-based optical nanosensors in the past seven years (2015-now). Furthermore, trends and challenges in the application of these nanosensors in the determination of those analytes are discussed to suggest possible directions for future developments.

Identification of heavy metal ions from aqueous environment through gold, Silver and Copper Nanoparticles: An excellent colorimetric approach

Heavy metal pollution has become a severe threat to human health and the environment for many years. Their extensive release can severely damage the environment and promote the generation of many harmful diseases of public health concerns. These toxic heavy metals can cause many health problems such as brain damage, kidney failure, immune system disorder, muscle weakness, paralysis of the limbs, cardio complaint, nervous system. For many years, researchers focus on developing specific reliable analytical methods for the determination of heavy metal ions and preventing their acute toxicity to a significant extent. The modern researchers intended to utilize efficient and discerning materials, e.g. nanomaterials, especially the metal nanoparticles to detect heavy metal ions from different real sources rapidly. The metal nanoparticles have been broadly utilized as a sensing material for the colorimetric detection of toxic metal ions. The metal nanoparticles such as Gold (Au), Silver (Ag), and Copper (Cu) exhibited localized plasmon surface resonance (LPSR) properties which adds an outstanding contribution to the colorimetric sensing field. Though, the stability of metal nanoparticles was major issue to be exploited colorimetric sensing of heavy emtal ions, but from last decade different capping and stabilizing agents such as amino acids, vitmains, acids and ploymers were used to functionalize the metal surface of metal nanoparticles. These capping agents prevent the agglomeration of nanoparticles and make them more active for prolong period of time. This review covers a comprehensive work carried out for colorimetric detection of heavy metals based on metal nanoparticles from the year 2014 to onwards.

Rosmarinic Acid-Capped Silver Nanoparticles for Colorimetric Detection of CN- and Redox-Modulated Surface Reaction-Aided Detection of Cr(VI) in Water

Rosmarinic acid-capped silver nanoparticles (Ro-AgNPs) were prepared and applied as a probe for selective colorimetric detection of cyanide (CN-) and chromium(VI) [Cr(VI)] under different conditions in aqueous media. The carbon atom of CN- interacts with the AgNPs, and the carbon atom donates electrons from the HOMO to the vacant orbitals of the coordinatively unsaturated surface atom (Ag0). After donating electrons, CN- attached onto the surface of the nanoparticles becomes very reactive and interacts with dissolved oxygen and generates reactive oxygen species (ROS) such as superoxide (O2 -), singlet oxygen (1O2), and so forth. In this process, Ag0 oxidizes to Ag+ and combines with CN- forming water-insoluble AgCN, and the ROS (O2 -) formed reacts with Ag/Ag+ to form Ag2O. The oxidation of Ag0 to Ag+ resulted in dissolution of AgNPs, which causes disappearance of the surface plasmon resonance band and color change from yellow to colorless. For detection of Cr(VI), ascorbic acid and CN- were added first; the ascorbic acid replaced the rosmarinic acid and then reduced the added Cr(VI) to Cr(III), and, in this process, ascorbic acid was oxidized to dehydroascorbic acid, which moved away from the nanoparticles' surface. CN- then interacted with the surface Ag0 atom, got activated, and interacted with dissolved oxygen forming Ag+ and ROS, which then followed the same process as described for CN- to form AgCN and Ag2O with a color change. The limits of detection were found to be 0.01 and 0.03 μM for CN- and Cr(VI), respectively. The material was also used for sensing CN- and Cr(VI) in real samples, and the results obtained were satisfactory. For field application, agarose-based strips were prepared by immobilizing the nanoparticles onto the agarose film and successfully used for the detection of CN- and Cr(VI) in water.

Novel biogenic silver and gold nanoparticles for multifunctional applications: Green synthesis, catalytic and antibacterial activity, and colorimetric detection of Fe(III) ions

In this study, novel biogenic silver (AgNPs) and gold nanoparticles (AuNPs) were developed using a green approach with Ganoderma lucidum (GL) extract. The optimization of synthesis conditions for the best outcomes was conducted. The prepared materials were characterized and their applicability in catalysis, antibacterial and chemical sensing was comprehensively evaluated. The GL-AgNPs crystals were formed in a spherical shape with an average diameter of 50 nm, while GL-AuNPs exhibited multi-shaped structures with sizes ranging from 15 to 40 nm. As a catalyst, the synthesized nanoparticles showed excellent catalytic activity (>98% in 9 min) and reusability (>95% after five recycles) in converting 4-nitrophenol to 4-aminophenol. As an antimicrobial agent, GL-AuNPs were low effective in inhibiting the growth of bacteria, while GL-AgNPs expressed strong antibacterial activity against all the tested strains. The highest growth inhibition activity of GL-AgNPs was observed against B. subtilis (14.58 ± 0.35 mm), followed by B. cereus (13.8 ± 0.52 mm), P. aeruginosa (12.38 ± 0.64 mm), E. coli (11.3 ± 0.72 mm), and S. aureus (10.41 ± 0.31 mm). Besides, GL-AgNPs also demonstrated high selectivity and sensitivity in the colorimetric detection of Fe³⁺ in aqueous solution with a detection limit of 1.85 nM. Due to the suitable thickness of the protective organic layer and the appropriate particle size, GL-AgNPs validated the triple role as a high-performance catalyst, antimicrobial agent, and nanosensor for environmental monitoring and remediation.

Dual fluorometric biosensor based on a nanoceria encapsulated metal organic framework and a signal amplification strategy of a hybridization chain reaction for the detection of melamine and Pb2+ ions in food samples

The increased need for melamine and Pb2+ ion detection systems that are versatile, ultra-sensitive, and easy to use is highly significant.

Tannic Acid-Capped Gold Nanoparticles as a Novel Nanozyme for Colorimetric Determination of Pb2+ Ions

In this study, tannic acid-modified gold nanoparticles were found to have superior nanozyme activity and catalyze the oxidation reaction of 3,3′,5,5′-tetramethylbenzidine in the presence of hydrogen peroxide. Enhancing the catalytic activity of the nanozyme by Pb2+ ions caused by selectively binding metal ions by the tannic acid-capped surface of gold nanoparticles makes them an ideal colorimetric probe for Pb2+. The parameters of the reaction, including pH, incubation time, and concentration of components, were optimized to reach maximal sensitivity of Pb2+ detection. The absorption change is directly proportional to the Pb2+ concentration and allows the determination of Pb2+ ions within 10 min. The colorimetric sensor is characterized by a wide linear range from 25 to 500 ng×mL−1 with a low limit of detection of 11.3 ng×mL−1. The highly sensitive and selective Pb2+ detection in tap, drinking, and spring water revealed the feasibility and applicability of the developed colorimetric sensor.

Effective reduction of nitrophenols and colorimetric detection of Pb(ii) ions by Siraitia grosvenorii fruit extract capped gold nanoparticles

This study presents a simple and green approach for the synthesis of Siraitia grosvenorii fruit extract capped gold nanoparticles (SG-AuNPs). The SG-AuNPs samples prepared under the optimized conditions were characterized by various techniques (UV-Vis, XRD, FTIR, HR-TEM, EDX, DLS). The biosynthesized nanoparticles were then studied for the reduction of 2-nitrophenol (2-NP) and 3-nitrophenols (3-NP) and for colorimetric detection of Pb2+ ions. The characterization results revealed that the crystals of SG-AuNPs were spherical with an average size of 7.5 nm. The FTIR and DLS analyses proved the presence of the biomolecule layer around AuNPs, which played an important role in stabilizing the nanoparticles. The SG-AuNPs showed excellent catalytic activity in the reduction of 3-NP and 2-NP, achieving complete conversion within 14 min. The catalytic process was endothermic and followed pseudo-first-order kinetics. The activation energy was determined to be 10.64 and 26.53 kJ mol-1 for 2-NP and 3-NP, respectively. SG-AuNPs maintained high catalytic performance after five recycles. The fabricated material was also found to be highly sensitive and selective to Pb2+ ions with the detection limit of 0.018 μM in a linear range of 0-1000 μM. The practicality of the material was validated through the analyses of Pb2+ in mimic pond water samples. The developed nanoparticles could find tremendous applications in environmental monitoring.

Chemical sensing with Au and Ag nanoparticles

Noble metal nanoparticles (NPs) are ideal scaffolds for the fabrication of sensing devices because of their high surface-to-volume ratio combined with their unique optical and electrical properties which are extremely sensitive to changes in the environment. Such characteristics guarantee high sensitivity in sensing processes. Metal NPs can be decorated with ad hoc molecular building blocks which can act as receptors of specific analytes. By pursuing this strategy, and by taking full advantage of the specificity of supramolecular recognition events, highly selective sensing devices can be fabricated. Besides, noble metal NPs can also be a pivotal element for the fabrication of chemical nose/tongue sensors to target complex mixtures of analytes. This review highlights the most enlightening strategies developed during the last decade, towards the fabrication of chemical sensors with either optical or electrical readout combining high sensitivity and selectivity, along with fast response and full reversibility, with special attention to approaches that enable efficient environmental and health monitoring.

Limitations for colorimetric aggregation assay of metal ions and ways of their overcoming

The development of analytical methods for the determination of metal ions in water is one of the priority tasks for efficient environmental monitoring. The use of modified gold nanoparticles and the colorimetric detection of their aggregation initiated by ions binding with specific receptors on the nanoparticle surface has high potential for simple testing. However, the limits of this approach and the parameters determining the assay sensitivity are not clear, and the possibilities of different assay formats are estimated only empirically. We have proposed a mathematical description of the aggregation processes in the assay and have estimated the detection limits of an aptamer-based assay of Pb2+ ions theoretically and experimentally. In the studied assay, gold nanoparticles modified with G,T-enriched aptamer were used, and their aggregation caused by the interaction with Pb2+ ions was controlled via a color change. The experimentally determined limit of Pb2+ detection was 700 ppb, which was in good agreement with theoretical calculations. An examination of the model showed that the limiting parameter of the assay is the binding constant of the aptamer-Pb2+ ion interaction. To overcome this limitation without searching for alternate receptors, two methods have been proposed, namely additional aggregation-causing components or centrifugation. These approaches lowered the detection limit to 150 ppb and even to 0.4 ppb. The second value accords with regulatory demands for the permissible levels of water source contamination, and the corresponding approach has significant competitive potential due to its rapidity, simple implementation, and the visual assessment of the assay results.

Highly selective rapid colorimetric sensing of Pb2+ ion in water samples and paint based on metal induced aggregation of N-decanoyltromethamine capped gold nanoparticles

Lead is highly toxic. The detection of lead in the environmental bodies is difficult, because it is colourless and odourless. Herein, we report the synthesis of gold nanoparticles (AuNPs) using the interdigitized vesicles formed by N-decanoyltromethamine (NDTM). AuNPs stabilized by NDTM was pink in colour with spherical shape and the size is 29 ± 7 nm. The optical property of the NDTM-AuNPs was explored for the first time to detect toxic chemical, Pb²⁺. The addition of toxic metal ion Pb²⁺ to NDTM-AuNPs rapidly (< 1 min) alters the colour from pink to violet due to aggregation, which was confirmed by particle size analyser and TEM. The aggregation induced colour changes were realized via broad spectra in UV-Vis spectroscopy. NDTM-AuNPs showed a selective and sensitive spectrophotometric signal with Pb²⁺ when compared with other metal ions. The colorimetric change as a function of Pb²⁺ concentration gave a linear response in the range of 0-30 μM (R² = 0.9942). The detection limit was found at 10 μM by naked eye and 0.35 μM by spectrophotometry. The proposed method was successfully applied for the determination of Pb²⁺ ions in tap water and sewage water. Moreover, as a proof of concept, the NDTM-AuNPs sensor system was applied for the detection of lead in commercial paints. The results of the quantitative estimation of lead in paints by NDTM-AuNPs colorimetric sensor were as good as the standard method, atomic absorption spectroscopy.

Solvothermal assisted phosphate functionalized graphitic carbon nitride quantum dots for optical sensing of Fe ions and its thermodynamic aspects

A facile method has been proposed for the determination of Ferrous (Fe(II)) and Ferric (Fe(III)) ions using phosphate functionalized graphitic carbon nitride quantum dots (Ph-g-CNQDs) in an aqueous medium. The easy solvothermal procedure using oleic acid as the solvent yielded the Ph-g-CNQDs in less than 30 min. The communication among the Fe(II) and Fe(III) with Ph-g-CNQDs caused quenching of the blue Ph-g-CNQDs fluorescence signals. The Ph-g-CNQDs have been successfully characterized using X-ray diffractometry (XRD), X-ray Photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM), Fourier Transform Infrared (FT-IR) spectroscopy, UV-vis absorption and photoluminescence spectrophotometry. The temperature dependent behavior of the Ph-g-CNQDs was also observed and various thermodynamic parameters have also been evaluated. The Ph-g-CNQDs displayed an excellent quantum yield of 60.54% using quinine sulfate as the standard reference. The developed method has been applied to water samples collected from different sources and good recoveries were observed which entitles this method as apt for real time monitoring.

The synthesis and application of (E)-N'-(benzo[d]dioxol-5-ylmethylene)-4-methyl-benzenesulfonohydrazide for the detection of carcinogenic lead

In this study, noble ligands of (E)-N'-(benzo[d]dioxol-5-ylmethylene)-4-methyl-benzenesulfonohydrazide (BDMMBSH) were prepared via a simple condensation method using benzo-[d][1,3]-dioxole carbaldehyde, benzenesulfonylhydrazine (BSH), and 4-methyl-benzenesulphonylhydrazine (4-MBSH) in good yield, which were crystallized in acetone, EtOAc, and EtOH. The BDMMBSH derivatives were characterized using different spectroscopic techniques, such as 1H-NMR, 13C-NMR, FTIR, and UV-Vis spectroscopy, and their crystal structures were analyzed using the single crystal X-ray diffraction method (SCXRDM). Subsequently, the BDMMBSH compounds were used for the significant detection of the carcinogenic heavy metal ion, lead (Pb2+), via a reliable electrochemical approach. A sensitive and selective Pb2+ sensor was developed via the deposition of a thin layer of BDMMBSH on a GCE with the conducting polymer matrix Nafion (NF). The sensitivity, LOQ, and LOD of the proposed sensor towards Pb2+ were calculated from the calibration curves to be 2220.0 pA μM-1 cm-2, 320.0 mM, and 96.0 pM, respectively. The validation of the BDMMBSH/GCE/NF sensor probe was performed via the selective determination of Pb2+ in spiked natural samples with a satisfactory and rational outcome.

Facile and Green Fabrication of Carrageenan-Silver Nanoparticles for Colorimetric Determination of Cu2+ and S2

In the present work, silver nanoparticles (AgNPs) were prepared by a simple and green method using carrageenan as reducing and capping agent. The as-synthesized carrageenan-AgNPs was demonstrated as an effective duel colorimetric sensing for selective and sensitive recognition of Cu²⁺ and S²⁻, which could be used to detect these ions with naked eyes. In addition, the possible sensing mechanism was that Cu²⁺ ions caused serious aggregation of carrageenan-AgNPs, which led to the color change of carrageenan-AgNPs. AgNPs were etched by S²⁻ forming Ag₂S, which played an important role in the determination of S²⁻ ions. Furthermore, it has been successfully applied to the determination of Cu²⁺ and S²⁻ in tap water and lake water, showing its great potential for the analysis of environmental water samples.

Lipoic Acid Decorated Gold Nanoparticles and Their Application in the Detection of Lead Ions

A simple colorimetric method has been developed for the detection of lead (Pb2+) in water samples using lipoic acid-functionalized gold nanoparticles. The lipoic acid-functionalized gold nanoparticles are induced to aggregate in the presence of the Pb2+ which results in a change in the color of the functionalized gold nanoparticles. The change in color and the amount of Pb2+ producing the change could be monitored via UV-visible spectrophotometry. A good correlation coefficient of 0.9927 was obtained for the calibration curve of the colorimetric method. The method was applied in the determination of Pb2+ in water samples and the results compared to that of measurement carried out with Atomic Absorption Spectroscopy.

Colorimetric Sensing of Pb2+ Ion by Using Ag Nanoparticles in the Presence of Dithizone

Colorimetric analysis of heavy metal ions can be realized by the aid of Ag nanoparticles to improve the analytical characteristics. The method is based on the localized surface plasmon resonance (LSPR) properties of the Ag nanoparticles (AgNPs). In this work, we applied the AgNPs with the addition of dithizone to further improve the selectivity and sensitivity of Pb2+ analysis. Colorimetric sensing of Pb2+ ions based on the polyvinyl alcohol (PVA)-stabilized-colloidal AgNPs in the presence of dithizone is reported. A linear decrease in the AgNPs LSPR absorbance at 421 nm was observed along with the increase in the Pb2+ concentration in the range of 0.50–10 µg/L. The other ions give a minor change in the LSPR absorbance of colloidal AgNPs. The Pb2+ limit of detection, the limit of quantification, and sensitivity were found to be 0.64 ± 0.04 µg/L, 2.1 ± 0.15 µg/L, 0.0282 ± 0.0040 L/µg (n = 5), respectively. The obtained sensitivity is comparable with that of the immunosensing method. The proposed method could offer a good alternative for colorimetric analysis of Pb2+ ions by using nanoparticles in the presence of ligands, which can improve selectivity.

Application of Gold-Nanoparticle Colorimetric Sensing to Rapid Food Safety Screening

Due to their unique optical properties, narrow size distributions, and good biological affinity, gold nanoparticles have been widely applied in sensing analysis, catalytic, environmental monitoring, and disease therapy. The color of a gold nanoparticle solution and its maximum characteristic absorption wavelength will change with the particle size and inter-particle spacing. These properties are often used in the detection of hazardous chemicals, such as pesticide residues, heavy metals, banned additives, and biotoxins, in food. Because the gold nanoparticles-colorimetric sensing strategy is simple, quick, and sensitive, this method has extensive applications in real-time on-site monitoring and rapid testing of food quality and safety. Herein, we review the preparation methods, functional modification, photochemical properties, and applications of gold nanoparticle sensors in rapid testing. In addition, we elaborate on the colorimetric sensing mechanisms. Finally, we discuss the advantages and disadvantages of colorimetric sensors based on gold nanoparticles, and directions for future development.

Fluorescence and Naked-Eye Detection of Pb2+ in Drinking Water Using a Low-Cost Ionophore Based Sensing Scheme

Drinking water contamination of lead from various environmental sources, leaching consumer products, and intrinsic water-pipe infrastructure is still today a matter of great concern. Therefore, new highly sensitive and convenient Pb2+ measurement schemes are necessary, especially for in-situ measurements at a low cost. Within this work dye/ionophore/Pb2+ co-extraction and effective water phase de-colorization was utilized for highly sensitive lead measurements and sub-ppb naked-eye detection. A low-cost ionophore Benzo-18-Crown-6-ether was used, and a simple test-tube mix and separate procedure was developed. Instrumental detection limits were in the low ppt region (LOD = 3, LOQ = 10), and naked-eye detection was 500 ppt. Note, however, that this sensing scheme still has improvement potential as concentrations of fluorophore and ionophore were not optimized. Artificial tap-water samples, leached by a standardized method, demonstrated drinking water application. Implications for this method are convenient in-situ lead ion measurements.

Recyclable colorimetric sensor of Cr3+ and Pb2+ ions simultaneously using a zwitterionic amino acid modified gold nanoparticles

In this work, a rapid, simple and sensitive colorimetric sensor for simultaneous (or respective) detection of Cr³⁺ and Pb²⁺ using tyrosine functionalized gold nanoparticles (AuNPs^Tyr) has been developed. Tyrosine, a natural and zwitterionic amino acid, could be as a reducing and capping agent to synthesise AuNPs and allow for the simultaneous and selective detection of Cr³⁺ and Pb²⁺. Upon the addition of Cr³⁺ or Pb²⁺ (a combination of them), the color of AuNPs^Tyr solution changes from red to blue grey and the characteristic surface plasmon resonance (SPR) band is red-shifted to 580nm due to the aggregation of AuNPs. Interestingly, the aggregated AuNPs^Tyr can be regnerated and recycled by removing Pb²⁺ and Cr³⁺. Even after 3 rounds, AuNPs^Tyr show almost the same A_580nm/A_520nm value for the assays of Pb²⁺ and Cr³⁺, indicating the good recyclability of the colorimetric sensor. The responding time (within 1min) and sensitivity of the colorimetric sensor are largely improved after the addition of 0.1M NaCl. Moreover, the AuNPs^Tyr aggregated by Cr³⁺ or Pb²⁺ (a combination of them) show excellent selectivity compared to other metal ions (Cr³⁺, Pb²⁺, Fe²⁺,Cu²⁺,Zn²⁺,Cr⁶⁺,Ni²⁺,Co²⁺,Hg²⁺,Mn²⁺,Mg²⁺,Ca²⁺,Cd²⁺). More importantly, the developed sensor manifests good stability at room temperature for 3months, which has been successfully used to determine Cr³⁺ and Pb²⁺ in the real water samples with a high sensitivity.

Colorimetric recognition of pazufloxacin mesilate based on the aggregation of gold nanoparticles

A novel colorimetric nanomaterial-assisted optical sensor for pazufloxacin mesilate was proposed for the first time. Pazufloxacin mesilate could induce the aggregation of glucose-reduced gold nanoparticles (AuNPs) through hydrogen-bonding interaction and electrostatic attraction, leading to the changes in color and absorption spectra of AuNPs. The effect of different factors such as pH, the amount of AuNPs, reaction time and reaction temperature was inspected. Under the optimum condition, UV-vis spectra showed that the absorption ratio (A670/A532) was linear with the concentration of pazufloxacin mesilate in the range from 9×10(-8) mol L(-1) to 7×10(-7) mol L(-1) with a linear coefficient of 0.9951. This method can be applied to detecting pazufloxacin mesilate with an ultralow detection limit of 7.92×10(-9) mol L(-1) without any complicated instruments. Through inspecting other analytes and ions, the anti-interference performance of AuNP detection system for pazufloxacin mesilate was excellent. For its high efficiency, rapid response rate as well as wide linear range, it had been successfully used to the analysis of pazufloxacin mesilate in human urine quantificationally.

Spectrofluorimetric determination of Hg2+ and Pb2+ using acetylcholinesterase (AChE)-based formation of silver nanoparticles

A novel fluorimetric detection method for Hg²⁺ and Pb²⁺ based on in situ formation of AgNPs, where thiocholine (TCh), a product obtained by the hydrolysis of acetylcholine (ACh) by acetylcholinesterase (AChE), can act as a stabilizing agent.