Automated determinations of selenium in thermal power plant wastewater by sequential hydride generation and chemiluminescence detection

Real-Time Monitoring of Selenium in Living Cells by Fluorescence Resonance Energy Transfer-Based Genetically Encoded Ratiometric Nanosensors

Selenium is a component of selenoproteins, which plays a crucial role in cellular redox homeostasis, thyroid metabolism, and DNA synthesis. Selenium has pleiotropic effects like antioxidant and anti-inflammatory activities; however, excess intake of selenium can imbalance such processes. The effects of selenium on human health are numerous and complex, demanding additional research to monitor the flux rate of selenium. Here, we have created a noninvasive and highly efficient genetically encoded fluorescence resonance energy transfer (FRET)-based nanosensor, SelFS (Selenium FRET-Sensor), for real-time monitoring of selenium at the cellular and subcellular levels. The construct of the nanosensor contains a selenium-binding protein (SeBP) as the selenium-detecting element inserted between the green fluorescent protein variants enhanced cyan fluorescent protein and Venus. In the presence of selenium, SelFS brings a conformational change, which is seen in the form of FRET. In vitro studies showed that SelFS is highly specific and selective for selenium and stable at an altered pH range from 5.0 to 8.0. SelFS is a flexible and dynamic tool for the detection of selenium in both prokaryotes and eukaryotes in a noninvasive way, with a binding constant (K _d) of 0.198 × 10^-6 M as compared to its mutants. The developed nanosensor can provide us a reporter tool for a wide range of industrial and environmental applications, which will help us to understand its functions in biological systems.

Evaluation of water quality using a Takagi-Sugeno fuzzy neural network and determination of heavy metal pollution index in a typical site upstream of the Yellow River

Assessment of river water quality is very important for understanding the impact of human activities on aquatic ecosystems. As the second-largest river in China, the Yellow River's water environment is closely related to the social development and water security of northern China. The Huangshui River is a major tributary of the upper Yellow River, and it supplies water to cities in the lower reaches. In this study, a Takagi-Sugeno (T-S) fuzzy neural network was used to evaluate water quality of the Huangshui River, and pollutant sources were analyzed. The heavy metal pollution index (HPI) was calculated to assess the heavy metal pollution level, and the health risks posed by heavy metal elements were assessed. The results indicated that the main contaminants in the Huangshui River were ammonia nitrogen (NH₃-N) and total phosphorus (TP), which was affected by various activities of industry, agriculture, and urbanization, and the maximum concentration of NH₃-N and TP was 5.90 mg/L and 0.36 mg/L, respectively. The T-S evaluation results of some points in the middle reaches were 3.317 and 3.197, which belonged to Level Ⅳ and the water quality was poor. The concentrations of Cu, Zn and Cr in the river were 0.57-44.58 μg/L, 10-122.50 μg/L and 2-28.67 μg/L, respectively, and they were relatively large. The T-S fuzzy neural network could evaluate water quality, avoiding extreme evaluation results by using fuzzy rules to reduce the influence of pollutant concentrations that are too high or too low. In addition to qualitative categorization of water quality, this approach can also quantitatively assess water quality within a single category. The results of water quality assessment could provide a scientific data support for river management.

Determination of oxoanions and water-soluble species of arsenic, selenium, antimony, vanadium, and chromium eluted in water from airborne fine particles (PM2.5): effect of acid and transition metal content of particles on heavy metal elution

Heavy metals in particulate matter (PM) are of great concern, and their effects on the environment and human health depend on their solubilities and species present. In this study, the solubility of As, Se, Sb, V and Cr and their species eluted in water was investigated. As, Se, Sb, and V were present mostly in fine particles, and they were predominantly water-soluble in fine particles (<2.5 μm, PM_2.5) but insoluble in coarse particles (>2.5 μm). Solubility of Cr was poor even in fine particles. It was found that for fine particles, solubilities of the heavy metals were related to the nitrate and sulfate contents. This suggests that the higher the acidity of the particles, the higher the solubility of the heavy metals. Oxoanions of the five kinds of heavy metals in water extracts of fine particles were determined by inductively coupled plasma mass spectrometry preceded by ion chromatography. The results suggested the presence of atmospheric oxidation during the aerosol transportation. Also, the As(iii)/As(v) (arsenite/arsenate) ratios for the fine particle extracts were related to the transition metal concentrations, which indicated that Fe, Cu, etc. in fine particles affected the As redox equilibrium. It was suggested that the heavy metals exist as complexes with iron hydroxide and dissolved organic matter in addition to the free oxoanions. These investigations were performed for PM samples collected in winter and summer in Kumamoto, west Japan, where the site is strongly exposed to westerly winds from continental East Asia. The obtained results improve our understanding of the behavior of the heavy metals in airborne PM after depositing on a wet environment and biota.

High Sensitivity Monitoring Device for Onboard Measurement of Dimethyl Sulfide and Dimethylsulfoniopropionate in Seawater and an Oceanic Atmosphere

An automated device has been developed to measure aqueous dimethyl sulfide (DMSaq), its precursor dimethylsulfoniopropionate (DMSP), and atmospheric gaseous dimethyl sulfide (DMSg). In addition to having a role in the oceanic atmosphere, DMS and DMSP have recently gained substantial interest within the biosciences and are suspected as chemoattractants for predators searching for prey. To provide the spatial resolution relevant for biogeochemical functions, fast and on-site analysis of these compounds is an important technique. The system described measures the dimethyl sulfur compounds by sequential vaporization of DMSaq and DMSP to their gas phase, which is then analyzed by chemiluminescence detection (SVG-CL). The device has five analysis modes (full, DMS, water, gas, and DMSP mode) that can be selected by the user depending on the required analyte or desired sampling rate. Seawater analyses were performed by the developed SVG-CL system and, simultaneously, by an ion molecule reaction-mass spectrometer and a gas chromatograph-flame photometric detector to verify quantitative analysis results. Results obtained by the new method/device agreed well with those by the other methods. Detection limits of the SVG-CL system are 0.02 ppbv and 0.04 nM for DMSg and DMSaq/DMSP, respectively, which are much better than those of the mass spectrometer. The SVG-CL system can be easily installed and operated on a boat. Spatial variability in DMS and DMSP off the coast of Japan were obtained, showing significant changes in the concentrations of the components at the brackish/saline water interface and at the channel between the closed and open seas.

Optimization of instrument conditions for the analysis for mercury, arsenic, antimony and selenium by atomic absorption spectroscopy

The chemical vapor generation atomic absorption spectrometry technique is extremely popular for trace analysis specifically hydride generation continuous flow systems for arsenic, antimony, selenium and cold vapor for mercury. Optimizing the instrument parameters as well as the hydride generating reactions will improve the sensitivity and reliability of the results obtained. The advantage of optimizing these conditions increases the production of hydrides or vapor species formed thereby improving recoveries. In addition this helps to reduce chemical interferences from other species that may compete with the analyte of interest for hydride formation. Parameters optimized include: •Reagent flow rate•Sample flow rate•Argon flow rate•Acetylene/Air ratio•Concentration of reagents•Read delay time For the analytical procedure the flow rate of the reagents and sample was affected by the tension on the peristaltic pump and the size of the tubing. The optimized flow rate for all reagents was between 0.9-1.0 mL/min and between 6-7 mL/min for the sample when both conditions were applied. The optimized type and concentrations of the reducing agent for Arsenic, Antimony and Selenium were NaBH4 (0.6% w/v), NaBH4 (0.7% w/v) and NaBH4 (0.1% w/v) in NaOH (0.5% w/v) respectively and SnCl2 (25% w/v) in HCl (20% v/v) for Mercury. The concentration and type of acid that produced the optimum signals for Arsenic, Antimony and Selenium were 5, 10 and 10 mol/dm-3 respectively. The flow rates for the carrier gas (Argon) for Arsenic, Antimony, Selenium and Mercury were optimized at 0.2, 0.2, 2.0 and 2.0 mL/min respectively. The optimized flow rate for fuel gas (Acetylene) for all the metals except Mercury was 2.5 mL/min. The optimized Instrument Read Delay Time for Mercury was 70 s and 20 s for Arsenic, Antimony and Selenium.

An electrochemical sequential injection method to investigate the adsorption of selenite on Fe(III) polyhydroxy cations intercalated vermiculite

A sequential injection - square wave anodic stripping voltammetry (SI-SWASV) method for determination of Se(IV) at a gold working electrode was developed to investigate the adsorption of Se(IV) onto vermiculite intercalated with Fe(III) polyhydroxy cations. The limits of detection and quantification were 0.060 and 0.20 μmol L^-1, respectively (4.7 and 15.7 μg L^-1). The linearity was up to 1.0 μmol L^-1, and the sampling throughput was 18 analyses h^-1. The proposed approach is a low-cost alternative to more expensive spectrometric methods. Adsorption onto vermiculite intercalated with Fe(III) polyhydroxy cations removed 93% of Se(IV) from a 1.0 μmol L^-1 solution (250 mL) after 5 min of contact time with 625 mg of adsorbent. Adsorption isotherms (25.0 ± 0.5 °C) were fitted by the Freundlich equation resulting in 1/n = 0.51 ± 0.03 and K_f = (1.584 ± 0.002) × 10³ μmol^1-1/n g^-1 L^1/n (r² = 0.995). Fitting by the Langmuir equation resulted in an adsorption constant of 0.026 ± 0.008 L g^-1 and adsorption capacity of 47 ± 5 μmol g^-1 (3.7 ± 0.4 mg g^-1) (r² = 0.97). This capacity was higher than that found for several other iron oxides, but lower than that obtained for oxide/hydroxide-based Fe(III) nanoparticles.

Monitoring variations of dimethyl sulfide and dimethylsulfoniopropionate in seawater and the atmosphere based on sequential vapor generation and ion molecule reaction mass spectrometry

To monitor the fluctuations of dimethyl sulfur compounds at the seawater/atmosphere interface, an automated system was developed based on sequential injection analysis coupled with vapor generation-ion molecule reaction mass spectrometry (SIA-VG-IMRMS). Using this analytical system, dissolved dimethyl sulfide (DMS(aq)) and dimethylsulfoniopropionate (DMSP), a precursor to DMS in seawater, were monitored together sequentially with atmospheric dimethyl sulfide (DMS(g)). A shift from the equilibrium point between DMS(aq) and DMS(g) results in the emission of DMS to the atmosphere. Atmospheric DMS emitted from seawater plays an important role as a source of cloud condensation nuclei, which influences the oceanic climate. Water samples were taken periodically and dissolved DMS(aq) was vaporized for analysis by IMRMS. After that, DMSP was hydrolyzed to DMS and acrylic acid, and analyzed in the same manner as DMS(aq). The vaporization behavior and hydrolysis of DMSP to DMS were investigated to optimize these conditions. Frequent (every 30 min) determination of the three components, DMS(aq)/DMSP (nanomolar) and DMS(g) (ppbv), was carried out by SIA-VG-IMRMS. Field analysis of the dimethyl sulfur compounds was undertaken at a coastal station, which succeeded in showing detailed variations of the compounds in a natural setting. Observed concentrations of the dimethyl sulfur compounds both in the atmosphere and seawater largely changed with time and similar variations were repeatedly observed over several days, suggesting diurnal variations in the DMS flux at the seawater/atmosphere interface.