Development of an impedimetric aptasensor for the determination of aflatoxin M1 in milk

Electrochemical Sensor for the Detection and Accurate Early Diagnosis of Ovarian Cancer

Ovarian cancer (OC) has the highest mortality rate among malignant tumors, primarily because it is difficult to diagnose early. Exosomes, a type of extracellular vesicle rich in parental information, have garnered significant attention in the field of cancer diagnosis and treatment. They play an important regulatory role in the occurrence, development, and metastasis of OC. Consequently, exosomes have emerged as noninvasive biomarkers for early cancer detection. Therefore, identifying cancer-derived exosomes may offer a novel biomarker for the early detection of OC. In this study, we developed a metal-organic frameworks assembled "double hook"-type aptamer electrochemical sensor, which enables accurate early diagnosis of OC. Under optimal experimental conditions, electrochemical impedance spectroscopy technology demonstrated a good linear relationship within the concentration range of 31-3.1 × 106 particles per microliter, with a detection limit as low as 12 particles per microliter. The universal exosome detection platform is constructed, and this platform can not only differentiate between high-grade serous ovarian cancer (HGSOC) patients and healthy individuals but also distinguish between HGSOC patients and nonhigh-grade serous OC (non-HGSOC). Consequently, it provides a novel strategy for the early diagnosis of OC and holds great significance in clinical differential diagnosis.

Aptamer-based electrochemical nanobiosensor for research and monitoring of multiple sclerosis in mice models

Multiple sclerosis (MS) is a severe progressive autoimmune-inflammatory, demyelinating process in the central nervous system (CNS) with heterogeneous neurological symptoms appearing as a consequence of myelin break down. Myelin basic protein (MBP) makes up to 30 % of the CNS myelin [1] and it is known to be released into the cerebrospinal fluid (CSF) as a bioindicator of MS. Autoimmune encephalomyelitis (EAE) is a mice model of MS widely used for research and development of new treatments [2]. Herein, MBP specific aptamer developed for possible therapeutic purposes in mouse model [3] was applied as a bioreceptor for MBP recognition. A nanobiosensor for MBP detection and monitoring was developed by using graphene oxide (GO) nanoparticles integrated onto the screen-printed carbon electrodes (SPCE) and aptamer immobilized to create a bioactive layer on the sensor surface for MBP binding. The measurements were carried out using electrochemical impedance spectrometry (EIS). Validation studies were carried out in a biological matrix (artificial CSF) containing MBP, and MSA. The aptasensor had LOD in artificial CSF 0.01 ng/mL and showed its usability in the concentration range of 0.01 … 64 ng/mL.

CRISPR-Cas12a-based colorimetric aptasensor for aflatoxin M1 detection based on oxidase-mimicking activity of flower-like MnO2 nanozymes

Given the highly mutagenic and carcinogenic nature of Aflatoxin M1 (AFM1), the quantity assessment of AFM1 residues in milk and dairy products is necessary to maintain consumer health and food safety. Herein, CRISPR-Cas12a-based colorimetric aptasensor was developed using the catalytic activity of flower-like nanozymes of MnO2 and trans-cleavage property of CRISPR-Cas12a system to quantitatively detect AFM1. The basis of the developed colorimetric aptasensor relies on whether or not the CRISPR-Cas12a system is activated, as well as the contrast in oxidase-mimicking capability exhibited by flower-like MnO2 nanozymes when AFM1 is absent or present. When AFM1 is not present in the sample, single-stranded DNA (ssDNA) is degraded by the activated CRISPR-Cas12a, and the solution turns into yellow due to the catalytic activity of the nanozymes. While, in the attendance of AFM1, ssDNA degradation does not occur due to the inactivation of the CRISPR-Cas12a. Therefore, with the adsorption of the ssDNA on the MnO2 nanozymes, their catalytic activity decreases, and the solution color becomes pale yellow due to less oxidation of the chromogenic substrate. In this aptasensor, the relative absorbance changes increased linearly from 6 to 160 ng L-1, and the detection limit was 2.1 ng L-1. The developed aptasensor displays a selective detection performance and a practical application for quantitative analysis of AFM1 in milk samples. The results of the introduced aptasensor open up the way to design other selective and sensitive aptasensors for the detection of other mycotoxins by substitution of the used sequences.

A label-free aptasensor based on electrodeposition of gold nanoparticles on silver-based metal-organic frameworks for measuring ochratoxin A in black and red pepper

Since ochratoxin A (OTA) is immunotoxic, teratogenic and carcinogenic, it is very important to monitor this compound in food samples. In the present work, the development and fabrication of a label-free electrochemical aptasensor based on the gold nanoparticles/silver-based metal-organic framework (AuNPs/Ag-MOF) for the determination of ochratoxin A (OTA) is introduced. The aptasensor was fabricated by electrodeposition of AuNPs on a glassy carbon electrode modified with Ag-MOF. The characteristics of the synthesized Ag-MOF were determined by field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and UV-Visible spectroscopy. The aptamer was immobilized on the modified electrode and then OTA was incubated on it. The process of different stages of the aptasensor construction has been confirmed by two methods of electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) and using [Fe(CN)6]3-/4- as a redox probe. The EIS method has also been used for the OTA quantitative determination. The difference in charge transfer resistance (Rct) before and after the interaction of OTA with the immobilized aptamer was considered as the analytical response of the aptasensor. Using the developed aptasensor, it is possible to measure OTA in the concentration range of 1.0 × 10-3 to 200.0 ng mL-1 with a detection limit of 2.2 × 10-4 ng mL-1. Finally, the ability of the aptasensor to measure OTA in red and black pepper was investigated and completely satisfactory results were obtained.

Electrochemical Biosensors for the Detection of Antibiotics in Milk: Recent Trends and Future Perspectives

Antibiotics have emerged as ground-breaking medications for the treatment of infectious diseases, but due to the excessive use of antibiotics, some drugs have developed resistance to microorganisms. Because of their structural complexity, most antibiotics are excreted unchanged, polluting the water, soil, and natural resources. Additionally, food items are being polluted through the widespread use of antibiotics in animal feed. The normal concentrations of antibiotics in environmental samples typically vary from ng to g/L. Antibiotic residues in excess of these values can pose major risks the development of illnesses and infections/diseases. According to estimates, 300 million people will die prematurely in the next three decades (by 2050), and the WHO has proclaimed "antibiotic resistance" to be a severe economic and sociological hazard to public health. Several antibiotics have been recognised as possible environmental pollutants (EMA) and their detection in various matrices such as food, milk, and environmental samples is being investigated. Currently, chromatographic techniques coupled with different detectors (e.g., HPLC, LC-MS) are typically used for antibiotic analysis. Other screening methods include optical methods, ELISA, electrophoresis, biosensors, etc. To minimise the problems associated with antibiotics (i.e., the development of AMR) and the currently available analytical methods, electrochemical platforms have been investigated, and can provide a cost-effective, rapid and portable alternative. Despite the significant progress in this field, further developments are necessary to advance electrochemical sensors, e.g., through the use of multi-functional nanomaterials and advanced (bio)materials to ensure efficient detection, sensitivity, portability, and reliability. This review summarises the use of electrochemical biosensors for the detection of antibiotics in milk/milk products and presents a brief introduction to antibiotics and AMR followed by developments in the field of electrochemical biosensors based on (i) immunosensor, (ii) aptamer (iii) MIP, (iv) enzyme, (v) whole-cell and (vi) direct electrochemical approaches. The role of nanomaterials and sensor fabrication is discussed wherever necessary. Finally, the review discusses the challenges encountered and future perspectives. This review can serve as an insightful source of information, enhancing the awareness of the role of electrochemical biosensors in providing information for the preservation of the health of the public, of animals, and of our environment, globally.

Mach-Zehnder Interferometric Immunosensor for Detection of Aflatoxin M1 in Milk, Chocolate Milk, and Yogurt

Aflatoxin M1 (AFM1) is detected in the milk of animals after ingestion of aflatoxin B1-contaminated food; since 2002, it has been categorized as a group I carcinogen. In this work, a silicon-based optoelectronic immunosensor for the detection of AFM1 in milk, chocolate milk, and yogurt has been developed. The immunosensor consists of ten Mach-Zehnder silicon nitride waveguide interferometers (MZIs) integrated on the same chip with the respective light sources, and an external spectrophotometer for transmission spectra collection. The sensing arm windows of MZIs are bio-functionalized after chip activation with aminosilane by spotting an AFM1 conjugate with bovine serum albumin. For AFM1 detection, a three-step competitive immunoassay is employed, including the primary reaction with a rabbit polyclonal anti-AFM1 antibody, followed by biotinylated donkey polyclonal anti-rabbit IgG antibody and streptavidin. The assay duration was 15 min with limits of detection of 0.005 ng/mL in both full-fat and chocolate milk, and 0.01 ng/mL in yogurt, which are lower than the maximum allowable concentration of 0.05 ng/mL set by the European Union. The assay is accurate (% recovery values 86.7-115) and repeatable (inter- and intra-assay variation coefficients <8%). The excellent analytical performance of the proposed immunosensor paves the way for accurate on-site AFM1 determination in milk.

Simultaneous Dual-Sensing Platform Based on Aptamer-Functionalized DNA Hydrogels for Visual and Fluorescence Detection of Chloramphenicol and Aflatoxin M1

In this study, a chloramphenicol and aflatoxin M1 aptamer-functionalized DNA hydrogel was designed for the simultaneous detection of chloramphenicol and aflatoxin M1 for the first time. The acrydite-modified chloramphenicol aptamer sequence was used to synthesize the DNA hydrogel and for visual detection of chloramphenicol depending on the gel-to-sol transition of the target-responsive DNA hydrogel. The DNA hydrogel formulation was set as follows: 60% of each linear polyacrylamide-DNA conjugate and 40% of acrylamide and chloramphenicol aptamer/DNA strand-1 at a molar ratio of 1:1, and the lowest concentration of chloramphenicol leading to gel dissociation was 1.0 nM at 25 °C. Furthermore, the formalized aptamer-functionalized DNA hydrogel was used to detect aflatoxin M1 by measuring the recovery of the fluorescence signal that was quenched when the FAM-labeled aflatoxin M1 aptamer and BHQ1-labeled DNA strand-2 were hybridized to form a double-stranded DNA in the network of hydrogel. The detection platform was successfully applied to the detection of chloramphenicol and aflatoxin M1, both in aqueous solution and in milk. The aptamer-functionalized DNA hydrogel had detection (LOD) and quantification limits (LOQ) for aflatoxin M1 as 1.7 and 5.2 nM, respectively. Using two aptamer sequences with high affinity and specificity, the dual-sensing platform based on the DNA hydrogel achieved higher selectivity for chloramphenicol and aflatoxin M1, which demonstrated its potential as a reliable simultaneous detection platform against two different targets for monitoring food safety.

Recent Advances in Nanomaterial-Based Sensing for Food Safety Analysis

The increasing public attention on unceasing food safety incidents prompts the requirements of analytical techniques with high sensitivity, reliability, and reproducibility to timely prevent food safety incidents occurring. Food analysis is critically important for the health of both animals and human beings. Due to their unique physical and chemical properties, nanomaterials provide more opportunities for food quality and safety control. To date, nanomaterials have been widely used in the construction of sensors and biosensors to achieve more accurate, fast, and selective food safety detection. Here, various nanomaterial-based sensors for food analysis are outlined, including optical and electrochemical sensors. The discussion mainly involves the basic sensing principles, current strategies, and novel designs. Additionally, given the trend towards portable devices, various smartphone sensor-based point-of-care (POC) devices for home care testing are discussed.

Selective and Sensitive Electrochemical Sensor for Aflatoxin M1 with a Molybdenum Disulfide Quantum Dot/Metal-Organic Framework Nanocomposite

Aflatoxins are the hepatotoxic secondary metabolites which are highly carcinogenic and known to cause several adverse effects on human health. The present study reports a simple, sensitive, and novel electrochemical sensor for aflatoxin M1 (AFM1). The sensor has been fabricated by modifying the screen-printed carbon electrodes with a functional nanocomposite of molybdenum disulfide (MoS₂) quantum dots (QDs) and a zirconium-based metal-organic framework (MOF), that is, UiO-66-NH₂. The MoS₂/UiO-66-modified electrodes were decorated with the AFM1-specific monoclonal antibodies and then investigated for the electrochemical detection of AFM1. Based on the electrochemical impedance spectroscopy analysis, it was possible to detect AFM1 in the concentration range of 0.2-10 ng mL^-1 with a limit of detection of 0.06 ng mL^-1. The realization of an excellent sensing performance can be attributed to the electroactivity of MoS₂ QDs and the large surface to volume area achieved by the addition of the MOF. The presence of UiO-66-NH₂ is also useful to attain readily available amine functionality for the robust interfacing of antibodies. The performance of the developed sensor has also been validated by detecting AFM1 in the spiked milk samples.

Electrochemical Aptasensors for Antibiotics Detection: Recent Achievements and Applications for Monitoring Food Safety

Antibiotics are often used in human and veterinary medicine for the treatment of bacterial diseases. However, extensive use of antibiotics in agriculture can result in the contamination of common food staples such as milk. Consumption of contaminated products can cause serious illness and a rise in antibiotic resistance. Conventional methods of antibiotics detection such are microbiological assays chromatographic and mass spectroscopy methods are sensitive; however, they require qualified personnel, expensive instruments, and sample pretreatment. Biosensor technology can overcome these drawbacks. This review is focused on the recent achievements in the electrochemical biosensors based on nucleic acid aptamers for antibiotic detection. A brief explanation of conventional methods of antibiotic detection is also provided. The methods of the aptamer selection are explained, together with the approach used for the improvement of aptamer affinity by post-SELEX modification and computer modeling. The substantial focus of this review is on the explanation of the principles of the electrochemical detection of antibiotics by aptasensors and on recent achievements in the development of electrochemical aptasensors. The current trends and problems in practical applications of aptasensors are also discussed.

Monitoring of Aflatoxin M1 in milk using a novel electrochemicalaptasensorbased on reduced graphene oxide and gold nanoparticles

Accurate and rapid detection of Aflatoxins as one of the most hazardous compounds in foodstuffs is very important. In this study, a label-free electrochemical aptasensor was developed to identify aflatoxin M1 using a reduced graphene oxide (rGO) and gold nanoparticles (AuNPs)-based pencil graphite electrode (PGE). The morphological characteristics of the electrode surface were investigated using SEM and rGO functional groups were confirmed by FTIR. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques were used to characterize various stages of electrode modification. In order to optimize the impedimetric response of the aptasensor, aptamer immobilization time, aptamer concentration, and binding aflatoxin M1 with aptamer time were optimized. Under optimal conditions, the linear concentration range of 0.5-800 ng/L and limit of detection (LOD) of 0.3 ng/L were obtained for aflatoxin M1 by measuring the resistance charge transfer data. Finally, the fabricated aptasensor was successfully used to measure AFM1 compared to HPLC method.

Optical and Electrochemical Aptasensors for Sensitive Detection of Aflatoxin B1 and Aflatoxin M1 in Blood Serum, Grape Juice, and Milk Samples

Aflatoxin food contamination with toxic and carcinogenic impacts on human health is a global concern. We have developed aptasensors for the detection of Aflatoxin M₁ (AFM₁) and B₁ (AFB₁) using electrochemical and optical methods. In the first method, an electrochemical aptasensor was designed for the detection of AFM₁ based on complementary strand of AFM₁ aptamer that was attached onto the gold nanoparticles and a hairpin-shaped AFM₁ aptamer. The designed electrochemical aptasensor showed high selectivity toward AFM₁ with a limit of detection (LOD) as low as 0.9 nM. Moreover, the developed aptasensor was successfully used to detect AFM₁ in milk and serum with LODs of 1.8 and 1.2 nM, respectively. In the second method, a novel electrochemical aptasensor was developed based on the π-shape structure of AFB₁ aptamer. The detection limit was found to be 2 pg/mL in buffer. Also, the developed aptasensor was used to analyze AFB₁ spiked human serum and grape juice samples, and the recoveries were 95.4-108.1%. In another method, a fluorescent sensing scheme was developed for AFB₁ detection based on a hairpin structure of G-quadruplex oligonucleotide-aptamer chimera, streptavidin-coated silica nanoparticles (SNP-streptavidin) and N-methyl mesoporphyrin IX (NMM). The LOD was reported as 8 pg/mL with a linear range of 30-900 pg/mL. Moreover, the developed sensor could detect AFB₁ in serum and grape juice with the LOD of 9.8 and 11.2 pg/mL, respectively.

Aptasensors for the detection of infectious pathogens: design strategies and point-of-care testing

The epidemic of infectious diseases caused by contagious pathogens is a life-threatening hazard to the entire human population worldwide. A timely and accurate diagnosis is the critical link in the fight against infectious diseases. Aptamer-based biosensors, the so-called aptasensors, employ nucleic acid aptamers as bio-receptors for the recognition of target pathogens of interest. This review focuses on the design strategies as well as state-of-the-art technologies of aptasensor-based diagnostics for infectious pathogens (mainly bacteria and viruses), covering the utilization of three major signal transducers, the employment of aptamers as recognition moieties, the construction of versatile biosensing platforms (mostly micro and nanomaterial-based), innovated reporting mechanisms, and signal enhancement approaches. Advanced point-of-care testing (POCT) for infectious disease diagnostics are also discussed highlighting some representative ready-to-use devices to address the urgent needs of currently prevalent coronavirus disease 2019 (COVID-19). Pressing issues in aptamer-based technology and some future perspectives of aptasensors are provided for the implementation of aptasensor-based diagnostics into practical application.

Development of Gold Nanoparticles Decorated Molecularly Imprinted–Based Plasmonic Sensor for the Detection of Aflatoxin M1 in Milk Samples

Aflatoxins are a group of extremely toxic and carcinogenic substances generated by the mold of the genus Aspergillus that contaminate agricultural products. When dairy cows ingest aflatoxin B1 (AFB1)−contaminated feeds, it is metabolized and transformed in the liver into a carcinogenic major form of aflatoxin M1 (AFM1), which is eliminated through the milk. The detection of AFM1 in milk is very important to be able to guarantee food safety and quality. In recent years, sensors have emerged as a quick, low–cost, and reliable platform for the detection of aflatoxins. Plasmonic sensors with molecularly imprinted polymers (MIPs) can be interesting alternatives for the determination of AFM1. In this work, we designed a molecularly–imprinted–based plasmonic sensor to directly detect lower amounts of AFM1 in raw milk samples. For this purpose, we prepared gold–nanoparticle–(AuNP)−integrated polymer nanofilm on a gold plasmonic sensor chip coated with allyl mercaptan. N−methacryloyl−l−phenylalanine (MAPA) was chosen as a functional monomer. The MIP nanofilm was prepared using the light–initiated polymerization of MAPA and ethylene glycol dimethacrylate in the presence of AFM1 as a template molecule. The developed method enabled the detection of AFM1 with a detection limit of 0.4 pg/mL and demonstrated good linearity (0.0003 ng/mL–20.0 ng/mL) under optimized experimental conditions. The AFM1 determination was performed in random dairy farmer milk samples. Using the analogous mycotoxins, it was also demonstrated that the plasmonic sensor platforms were specific to the detection of AFM1.

Monoclonal Antibody-Based Immunosensor for the Electrochemical Detection of Chlortoluron Herbicide in Groundwaters

Chlortoluron (3-(3-chloro-p-tolyl)-1,1-dimethyl urea) is an herbicide widely used in substitution to isoproturon to control grass weed in wheat and barley crops. Chlortoluron has been detected in groundwaters for more than 20 years; and dramatic increases in concentrations are observed after intense rain outbreaks. In this context; we developed an immunosensor for the determination of chlortoluron based on competitive binding of specific monoclonal antibodies on chlortoluron and immobilized biotinylated chlortoluron; followed by electrochemical detection on screen-printed carbon electrodes. The optimized immunosensor exhibited a logarithmic response in the range 0.01-10 µg·L-1; with a calculated detection limit (LOD) of 22.4 ng·L-1; which is below the maximum levels allowed by the legislation (0.1 µg·L-1). The immunosensor was used for the determination of chlortoluron in natural groundwaters, showing the absence of matrix effects.

The Role of Aryldiazonium Chemistry in Designing Electrochemical Aptasensors for the Detection of Food Contaminants

Food safety monitoring assays based on synthetic recognition structures such as aptamers are receiving considerable attention due to their remarkable advantages in terms of their ability to bind to a wide range of target analytes, strong binding affinity, facile manufacturing, and cost-effectiveness. Although aptasensors for food monitoring are still in the development stage, the use of an electrochemical detection route, combined with the wide range of materials available as transducers and the proper immobilization strategy of the aptamer at the transducer surface, can lead to powerful analytical tools. In such a context, employing aryldiazonium salts for the surface derivatization of transducer electrodes serves as a simple, versatile and robust strategy to fine-tune the interface properties and to facilitate the convenient anchoring and stability of the aptamer. By summarizing the most important results disclosed in the last years, this article provides a comprehensive review that emphasizes the contribution of aryldiazonium chemistry in developing electrochemical aptasensors for food safety monitoring.

Advances in Electrochemical and Acoustic Aptamer-Based Biosensors and Immunosensors in Diagnostics of Leukemia

Early diagnostics of leukemia is crucial for successful therapy of this disease. Therefore, development of rapid, sensitive, and easy-to-use methods for detection of this disease is of increased interest. Biosensor technology is challenged for this purpose. This review includes a brief description of the methods used in current clinical diagnostics of leukemia and provides recent achievements in sensor technology based on immuno- and DNA aptamer-based electrochemical and acoustic biosensors. The comparative analysis of immuno- and aptamer-based sensors shows a significant advantage of DNA aptasensors over immunosensors in the detection of cancer cells. The acoustic technique is of comparable sensitivity with those based on electrochemical methods; moreover, it is label-free and provides straightforward evaluation of the signal. Several examples of sensor development are provided and discussed.

Encapsulation of hemin in Fe-based metal-organic frameworks and its application for the direct determination of aflatoxin M1

A label-free electrochemical aptasensor was constructed for the sensitive and selective determination of AFM1. For preparation of the aptasensor, the AFM1 aptamer was immobilised on the surface of a glassy carbon electrode modified with hemin encapsulated in Fe-based metal-organic frameworks (hemin@Fe-MIL-101). The morphology and the structure of Fe-MIL-101 and hemin@Fe-MIL-101 were evaluated by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray powder diffraction and Brunauer-Emmett-Teller-N2 sorption methods. Electrochemical impedance spectroscopy and cyclic voltammetry were performed to monitor the fabrication process of the electrochemical aptasensor. The electrochemical reduction current of hemin encapsulated in Fe-MIL-101 serves as a signal for the quantitative determination of AFM1. Differential pulse voltammetry was done to determine the AFM1 concentration in the linear range of 1.0×10-1-100.0 ng/ml. The detection limit of AFM1 was estimated to be 4.6×10-2 ng/ml. Finally, the fabricated aptasensor was applied to determine AFM1 in raw and boiled milk samples.

Aptamer-Based Fluorescence Quenching Approach for Detection of Aflatoxin M1 in Milk

Aflatoxin M1 (AFM1), one of the most toxic mycotoxins, is a feed and food contaminant of global concern. In this study, we developed a fast and simple method for detection of AFM1 based on a structure-switching signaling aptamer. This aptasensor is based on the change in fluorescence signal due to formation of an AFM1/aptamer complex. To generate the aptasensor, the specific aptamer was modified with FAM (carboxyfluorescein), and their complementary DNAs (cDNA) were modified with a carboxytetramethylrhodamine (TAMRA) quenching group. In the absence of AFM1, the aptamers were hybridized with cDNA, resulting in quenching of the aptamer fluorescence due to the proximity of the aptamer's fluorophore to the quenching group on the cDNA. On the other hand, in the presence of AFM1, a structural switch in the aptamer was induced by formation of an AFM1/aptamer complex. Changes in the structure of the aptamer led to the release of the cDNA, causing the generation of a fluorescence signal. Thus, AFM1 concentrations could be quantitatively monitored based on the changes in fluorescences. Under optimized conditions, this assay exhibited a linear response to AFM1 in the range of 1-100 ng/mL and a limit of detection of 0.5 ng/mL was calculated. This proposed aptasensor was applied to milk samples spiked with a dilution series of AFM1, yielding satisfactory recoveries from 93.4 to 101.3%. These results demonstrated that this detection technique could be useful for high-throughput and quantitative determination of mycotoxin levels in milk and dairy products.

Aptasensors for mycotoxin detection: A review

Mycotoxins are toxic compounds produced by fungi, which represent a risk to the food and feed supply chain, having an impact on health and economies. A high percentage of feed samples have been reported to be contaminated with more than one type of mycotoxin. Systematic, cost-effective and simple tools for testing are critical to achieve a rapid and accurate screening of food and feed quality. In this review, we describe the various aptamers that have been selected against mycotoxins and their incorporation into optical and electrochemical aptasensors, outlining the strategies exploited, highlighting the advantages and disadvantages of each approach. The review also discusses the different materials used and the immobilization methods employed, with the aim of achieving the highest sensitivity and selectivity.

An ultrasensitive, homogeneous fluorescence quenching immunoassay integrating separation and detection of aflatoxin M1 based on magnetic graphene composites

A homogeneous fluorescence quenching immunoassay is described for simultaneous separation and detection of aflatoxin M₁ (AFM₁) in milk. The novel assay relies on monoclonal antibody (mAb) functionalized Fe₃O₄ decorated reduced-graphene oxide (rGO-Fe₃O₄-mAb) as both capture probe and energy acceptor, combined with tetramethylrhodamine cadaverine-labeled aflatoxin B₁ (AFB₁-TRCA) as the energy donor. In the assay, AFB₁-TRCA binds to rGO-Fe₃O₄-mAb in the absence of AFM₁, quenching the fluorescence of TRCA by resonance energy transfer. Significantly, the immunoassay integrates sample preparation and detection into a single step, by using magnetic graphene composites to avoid washing and centrifugation steps, and the assay can be completed within 10 min. Under optimized conditions, the visual and quantitative detection limits of the assay for AFM₁ were 50 and 3.8 ng L^-1, respectively, which were significantly lower than those obtained by fluorescence polarization immunoassay using the same immunoreagents. Owing to its operation and highly sensitivity, the proposed assay provides a powerful tool for the detection of AFM₁.

Polymer Nanoparticles and Nanomotors Modified by DNA/RNA Aptamers and Antibodies in Targeted Therapy of Cancer

Polymer nanoparticles and nano/micromotors are novel nanostructures that are of increased interest especially in the diagnosis and therapy of cancer. These structures are modified by antibodies or nucleic acid aptamers and can recognize the cancer markers at the membrane of the cancer cells or in the intracellular side. They can serve as a cargo for targeted transport of drugs or nucleic acids in chemo- immuno- or gene therapy. The various mechanisms, such as enzyme, ultrasound, magnetic, electrical, or light, served as a driving force for nano/micromotors, allowing their transport into the cells. This review is focused on the recent achievements in the development of polymer nanoparticles and nano/micromotors modified by antibodies and nucleic acid aptamers. The methods of preparation of polymer nanoparticles, their structure and properties are provided together with those for synthesis and the application of nano/micromotors. The various mechanisms of the driving of nano/micromotors such as chemical, light, ultrasound, electric and magnetic fields are explained. The targeting drug delivery is based on the modification of nanostructures by receptors such as nucleic acid aptamers and antibodies. Special focus is therefore on the method of selection aptamers for recognition cancer markers as well as on the comparison of the properties of nucleic acid aptamers and antibodies. The methods of immobilization of aptamers at the nanoparticles and nano/micromotors are provided. Examples of applications of polymer nanoparticles and nano/micromotors in targeted delivery and in controlled drug release are presented. The future perspectives of biomimetic nanostructures in personalized nanomedicine are also discussed.

Electrochemical Aptasensors: Current Status and Future Perspectives

This article reviews the progress of diversity of electrochemical aptasensor for target analytes detection. The immobilization strategies of aptamers on an electrode surface are addressed. The aptasensors are also introduced in compliance with the assay platforms. Many electrochemical aptasensors are nearly identical to conventional immunochemical approaches, sandwich and competition assays using electroactive signaling moieties. Others are "signal-on" and "sign-off" aptasensors credited to the target binding-induced conformational change of aptamers. Label-free aptasensors are also highlighted. Furthermore, the aptasensors applied for clinically important biomarkers are emphasized.

Impedimetric Aptamer-Based Biosensors: Applications

Impedimetric aptamer-based biosensors show high potential for handheld devices and point-of-care tests. In this review, we report on recent advances in aptamer-based impedimetric biosensors for applications in biotechnology. We detail on analytes relevant in medical and environmental biotechnology as well as food control, for which aptamer-based impedimetric biosensors were developed. The reviewed biosensors are examined for their performance, including sensitivity, selectivity, response time, and real sample validation. Additionally, the benefits and challenges of impedimetric aptasensors are summarized.

Recent Advances in the Aptamer-Based Electrochemical Biosensors for Detecting Aflatoxin B1 and Its Pertinent Metabolite Aflatoxin M1

The notable toxicological impacts of aflatoxin B1 (AFB1) and its main metabolite, aflatoxin M1 (AFM1), on human being health make the evaluation of food quality highly significant. Due to the toxicity of those metabolites-even very low content in foodstuffs-it is crucial to design a sensitive and reliable procedure for their detection. Electrochemical aptamer-based biosensors are considered the most encouraging option, based on multi-placed analysis, rapid response, high sensitivity and specificity. The present review specifically emphasizes the potential utilization of the electrochemical aptasensors for determining the AFM1 and AFB1 with different electrodes.

Aptamer-Based Biosensor for Detection of Mycotoxins

Mycotoxins are a large type of secondary metabolites produced by fungi that pose a great hazard to and cause toxic reactions in humans and animals. A majority of countries and regulators, such as the European Union, have established a series of requirements for their use, and they have also set maximum tolerance levels. The development of high sensitivity and a specific analytical platform for mycotoxins is much in demand to address new challenges for food safety worldwide. Due to the superiority of simple, rapid, and low-cost characteristics, aptamer-based biosensors have successfully been developed for the detection of various mycotoxins with high sensitivity and selectivity compared with traditional instrumental methods and immunological approaches. In this article, we discuss and analyze the development of aptasensors for mycotoxins determination in food and agricultural products over the last 11 years and cover the literatures from the first report in 2008 until the present time. In addition, challenges and future trends for the selection of aptamers toward various mycotoxins and aptasensors for multi-mycotoxins analyses are summarized. Given the promising development and potential application of aptasensors, future research studies made will witness the great practicality of using aptamer-based biosensors within the field of food safety.

Grafting of Diazonium Salts on Surfaces: Application to Biosensors

This review is divided into two parts; the first one summarizes the main features of surface modification by diazonium salts with a focus on most recent advances, while the second part deals with diazonium-based biosensors including small molecules of biological interest, proteins, and nucleic acids.

Measurement of aflatoxin M1 in powder and pasteurized milk samples by using a label-free electrochemical aptasensor based on platinum nanoparticles loaded on Fe-based metal-organic frameworks

In the present study, a sensitive label-free electrochemical aptasensor is introduced to measure aflatoxin M1 (AFM1) by using platinum nanoparticles (PtNPs) decorated on a glassy carbon electrode (GCE) modified with Fe-based metal-organic frameworks, MIL-101(Fe). The MIL-101(Fe) and the PtNP/MIL-101(Fe) are synthesized and characterized by Fourier transform infrared spectroscopy, X-ray diffraction, UV-Visible spectroscopy, and field-emission scanning electron microscopy. Cyclic voltammetry and electrochemical impedance spectroscopy (EIS) are done to monitor the fabrication processes of the aptasensor. In optimum conditions, the linear calibration range of 1.0 × 10^-2 to 80.0 ng mL^-1 and the detection limit of 2.0 × 10^-3 ng mL^-1 are obtained to measure AFM1 concentration using the EIS method. Finally, the fabricated aptasensor is successfully applied to measure AFM1 concentration in powder and pasteurized milk samples.

What Electrochemical Biosensors Can Do for Forensic Science? Unique Features and Applications

This article critically discusses the latest advances in the use of voltammetric, amperometric, potentiometric, and impedimetric biosensors for forensic analysis. Highlighted examples that show the advantages of these tools to develop methods capable of detecting very small concentrations of analytes and provide selective determinations through analytical responses, without significant interferences from other components of the samples, are presented and discussed, thus stressing the great versatility and utility of electrochemical biosensors in this growing research field. To illustrate this, the determination of substances with forensic relevance by using electrochemical biosensors reported in the last five years (2015–2019) are reviewed. The different configurations of enzyme or affinity biosensors used to solve analytical problems related to forensic practice, with special attention to applications in complex samples, are considered. Main prospects, challenges to focus, such as the fabrication of devices for rapid analysis of target analytes directly on-site at the crime scene, or their widespread use and successful applications to complex samples of interest in forensic analysis, and future efforts, are also briefly discussed.

A Novel Graphene Oxide-Based Aptasensor for Amplified Fluorescent Detection of Aflatoxin M1 in Milk Powder

In this paper, a rapid and sensitive fluorescent aptasensor for the detection of aflatoxin M1 (AFM1) in milk powder was developed. Graphene oxide (GO) was employed to quench the fluorescence of a carboxyfluorescein-labelled aptamer and protect the aptamer from nuclease cleavage. Upon the addition of AFM1, the formation of an AFM1/aptamer complex resulted in the aptamer detaching from the surface of GO, followed by the aptamer cleavage by DNase I and the release of the target AFM1 for a new cycle, which led to great signal amplification and high sensitivity. Under optimized conditions, the GO-based detection of the aptasensor exhibited a linear response to AFM1 levels in a dynamic range from 0.2 to 10 μg/kg, with a limit of detection (LOD) of 0.05 μg/kg. Moreover, the developed aptasensor showed a high specificity towards AFM1 without interference from other mycotoxins. In addition, the technique was successfully applied for the detection of AFM1 in infant milk powder samples. The aptasensor proposed here offers a promising technology for food safety monitoring and can be extended to various targets.

Determination of aflatoxin M1 using an aptamer-based biosensor immobilized on the surface of dendritic fibrous nano-silica functionalized by amine groups

Aflatoxins are potential food pollutants produced by fungi. Among them, aflatoxin M1 (AF M1) is the most toxic. A great deal of concern is associated with AF M1 toxicity. Aflatoxins are potential food pollutants produced by fungi. Among them, aflatoxin M1 (AF M1) is the most toxic. A great deal of concern is associated with AF M1 toxicity. In the present work, a novel aptamer-based bioassay was developed for monitoring aflatoxin M1 (AF M1) in real samples. A chitosan-modified graphene quantum dot (GQD-CS) nanocomposite was used as a biocompatible substrate coated with dendritic fibrous nanosilica functionalized by amine groups (KCC-1-NH₂-Tb). Accordingly, an innovative biocompatible polymeric matrix was prepared for aptamer immobilization. The unique oligonucleotide of AF M1 (5'-ATC CGT CAC ACC TGC TCT GAC GCT GGG GTC GAC CCG GAG AAA TGC ATT CCC CTG TGG TGT TGG CTC CCG TAT) labelled by toluidine blue was immobilized on the engineered interface. Hence, a novel aptamer-based bioassay was formed for the highly sensitive quantitation of AF M1 using cyclic voltammetry and differential pulse voltammetry techniques. The structure and morphology of GQDs-CS/KCC-1-NH₂-Tb was investigated by Fourier transform infrared spectroscopy, X-ray diffraction, atomic force and scanning electron microscopy and energy-dispersive X-ray spectroscopy. The toxicity tests, which were performed by MTT assays, revealed the biocompatible nature of KCC-1-NH₂-Tb. The engineered aptasensor demonstrated excellent behaviour toward the determination of AF M1, where the low limit of quantification was 10 fM. The proposed aptamer-based bioassay was successfully used for the monitoring of AF M1 in milk samples. This work provides a beneficial reference for the sensing of other toxins in food/pharmaceutical assays and veterinary medicine.

AFM1 Detection in Milk by Fab' Functionalized Si3N4 Asymmetric Mach-Zehnder Interferometric Biosensors

Aflatoxins (AF) are naturally occurring mycotoxins, produced by many species of Aspergillus. Among aflatoxins, Aflatoxin M1 (AFM1) is one of the most frequent and dangerous for human health. The acceptable maximum level of AFM1 in milk according to EU regulation is 50 ppt, equivalent to 152 pM, and 25 ppt, equivalent to 76 pM, for adults and infants, respectively. Here, we study a photonic biosensor based on Si 3 N 4 asymmetric Mach-Zehnder Interferometers (aMZI) functionalized with Fab' for AFM1 detection in milk samples (eluates). The minimum concentration of AFM1 detected by our aMZI sensors is 48 pM (16.8 pg/mL) in purified and concentrated milk samples. Moreover, the real-time detection of the ligand-analyte binding enables the study of the kinetics of the reaction. We measured the kinetic rate constants of the Fab'-AFM1 interaction.

A novel fluorescence aptasensor based on mesoporous silica nanoparticles for selective and sensitive detection of aflatoxin B1

Based on the mesoporous silica nanoparticles (MSN), a novel, simple and label-free aptamer biosensor was designed for the detection of aflatoxin B₁ (AFB₁). Here, the aptamers were used as molecular recognition probes and "gated molecules" while Rh6G was loaded into the interior of the particles as the signal probe. In the absence of AFB₁, the "gate" was closed to prevent the leakage of the signal probe because of the immobilization of aptamers on the surface of MSN-NH₂. With the presence of AFB₁, the "gate" could be opened to release the signal probe for the specifical binding of aptamers to AFB₁. Our results showed that the fluorescence intensity was positively correlated with the concentration of AFB₁ (0.5-50 ng mL^-1), with the detection limit as low as 0.13 ng mL^-1. What's more, this design provides a new approach for rapid, sensitive and selective detection based on aptamers and it could be applied to numerous other analytes if appropriate aptamers are available.