Multielemental speciation analysis by advanced hyphenated technique - HPLC/ICP-MS: A review

Biosynthesis of Indigo Dyes and Their Application in Green Chemical and Visual Biosensing for Heavy Metals

Fermentative production of natural colorants using microbial strains has emerged as a cost-effective and sustainable alternative to chemical synthesis. Visual pigments are used as signal outputs in colorimetric bacterial biosensors, a promising method for monitoring environmental pollutants. In this study, we engineered four self-sufficient indigo-forming enzymes, including HbpAv, bFMO, cFMO, and rFPMO, in a model bacterium E. coli. TrxA-bFMO was chosen for its strong ability to produce indigo under T7 lac and mer promoters' regulation. The choice of bacterial hosts, the supplementation of substrate l-tryptophan, and ventilation were crucial factors affecting indigo production. The indigo reporter validated the biosensors for Hg(II), Pb(II), As(III), and Cd(II). The biosensors reported Hg(II) as low as 14.1 nM, Pb(II) as low as 1.5 nM, and As(III) as low as 4.5 nM but increased to 25 μM for Cd(II). The detection ranges for Hg(II), Pb(II), As(III), and Cd(II) were quantified from 14.1 to 225 nM, 1.5 to 24.4 nM, 4.5 to 73.2 nM, and 25 to 200 μM, respectively. The sensitivity, responsive concentration range, and selectivity are comparable to β-galactosidase and luciferase reporter enzymes. This study suggests that engineered enzymes for indigo production have great potential for green chemical synthesis. Additionally, heterologous biosynthesis of indigo production can lead to the development of novel, low-cost, and mini-equipment bacterial biosensors with zero background noise for visual monitoring of pollutant heavy metals.

Experimental design optimisation and validation by accuracy profile of a novel method for Hg speciation analysis by HPLC-ICP-MS and application to Total Diet Studies

This study addresses the development and validation of an analytical method for speciation analysis of mercury (inorganic/Hg2+ and methylmercury/CH3Hg+) in fishery products. The Hg species are separated by reversed-phase (RP) high-performance liquid chromatography (HPLC) coupled to inductively coupled plasma mass spectrometry (ICP-MS). The effective separation of Hg2+ and CH3Hg+ was achieved in <8 min using a peptide mapping RP column and a mobile phase containing 2-mercaptoethanol at 0.25% (v/v) and methanol at 1% (v/v). The optimization was carried out using an experimental design through response surface methodology (RSM) with central composite design (CCD), addressing both the HPLC separation and the sample extraction. The method validation was carried out based on the accuracy profile approach. For this purpose, six series of measurements were carried out in duplicate over a time span of 2 months. The limits of quantification (LOQ) were 2.5 µg/kg (wet weight, ww) for CH3Hg+ and 1.2 µg/kg (ww) for Hg2+. The intermediate reproducibility in terms of coefficient of variation (CVR) was <6%. The bias (%) obtained for the analysis of four certified reference materials (CRMs), namely TORT-3 (lobster hepatopancreas), SRM 1566-b (oyster tissue), SQID-1 (cuttlefish) and NMIJ CRM 7402-a (cod fish tissue) was <7%. This demonstrates the method robustness and suitability for routine speciation analysis of CH3Hg+ and Hg2+ in fishery products. The method is intended to be applied for the analysis of the panel of fishery products and fish-based foods in the framework of the (ongoing) third French Total Diet Study.

Simultaneous quantification of tin and lead species in Antarctic krill and fish by interfacing high-performance liquid chromatography with inductively coupled plasma mass spectrometry based on strong cation-exchange and Amphion columns

Tin and lead are a global concern considering their species-dependent toxicity, bioavailability and transformation. Simultaneous speciation analysis of tin and lead is challenging for a large food capacity containing unstable species. Herein, we developed two sensitive methods for rapid quantification of tin and lead species in Antarctic seafood by high-performance liquid chromatography and inductively coupled plasma mass spectrometry based on strong cation-exchange and Amphion columns. Inorganic tin and lead, four organotin and two organolead compounds can be analysed in 16 min on a 10-cm Amphion II column (mobile phase: 4 mM sodium dodecyl benzene sulfonate at pH 2.0) with 0.02-0.24 μg L-1 detection limits. The method was applied to Antarctic krill and fish, demonstrating the presence of any tin and lead species down to μg kg-1 level. Overall, the proposed methods are sensitive, efficient and environment-friendly for routine speciation analysis of tin and lead in food samples.

The determination of thallium in the environment: A review of conventional and advanced techniques and applications

Thallium (Tl) is a potential toxicity element that poses significant ecological and environmental risks. Recently, a substantial amount of Tl has been released into the environment through natural and human activities, which attracts increasing attention. The determination of this hazardous and trace element is crucial for controlling its pollution. This article summarizes the advancement and progress in optimizing Tl detection techniques, including atomic absorption spectroscopy (AAS), voltammetry, inductively coupled plasma (ICP)-based methods, spectrophotometry, and X-ray-based methods. Additionally, it introduces sampling and pretreatment methods such as diffusive gradients in thin films (DGT), liquid-liquid extraction, solid phase extraction, and cloud point extraction. Among these techniques, ICP-mass spectrometry (MS) is the preferred choice for Tl detection due to its high precision in determining Tl as well as its species and isotopic composition. Meanwhile, some new materials and agents are employed in detection. The application of novel work electrode materials and chromogenic agents is discussed. Emphasis is placed on reducing solvent consumption and utilizing pretreatment techniques such as ultrasound-assisted processes and functionalized magnetic particles. Most detection is performed in aqueous matrices, while X-ray-based methods applied to solid phases are summarized which provide non-destructive analysis. This work improves the understanding of Tl determination technology while serving as a valuable resource for researchers seeking appropriate analytical techniques.

An overview of preconcentration techniques combined with inductively coupled plasma mass spectrometry for trace element determination in biological studies

In the last decades, the determination of trace elements in biological materials has emerged as an important area of study because of its relevance to human health and the environment. Inductively coupled plasma mass spectrometry (ICP-MS) has proven to be a powerful tool for trace element analysis, owing to its high sensitivity and ability to determine several elements in a single measurement. However, given the complex nature of biological matrices and the presence of elements, most of them at ultratrace levels, it becomes crucial to complement ICP-MS with preconcentration techniques to increase the sensitivity and selectivity of analytical methods. This article presents an exhaustive overview of liquid- and solid-phase preconcentration techniques used in combination with ICP-MS for trace element determination in different biological samples from 2000 to the present. An in-depth discussion of the advances on the application of state-of-the-art solvents and materials in trace element extraction and preconcentration is presented. Special attention is given to different strategies for elemental speciation analysis, employing both chromatographic and non-chromatographic techniques. The role of automation in these methodologies is also described. Finally, future trends and challenges related to this topic are discussed.

Simultaneous preconcentration and quantification of ultra-trace tin and lead species in seawater by online SPE coupled with HPLC-ICP-MS

BACKGROUND

Tin and lead contamination is a global threat to marine ecosystems considering their species-specific toxicity, bioavailability and mobility. Hence simultaneous measurement of multiple tin and lead compounds at μg L-1 to pg L-1 levels in environmental water is always an indispensable but challengeable task. High performance liquid chromatography coupled with inductively coupled plasma mass spectrometry (HPLC-ICP-MS) is one of the most widely used choices for this purpose because of good sensitivity, strong separation power and good compatibility. Previous HPLC-ICP-MS methods based on a single elemental speciation strategy are low-efficiency and sensitivity-insufficient for a large set of unstable samples and interaction of multiple metal(loid)s down to ng L-1 levels.

RESULTS

In this study, we developed a sensitive, efficient and environment-friendly analytical method for accurate quantification of inorganic and organic species of tin and lead simultaneously based on HPLC-ICP-MS with online integration of solid phase extraction (SPE). By using graphene oxide modified silica conditioned with 1 mM benzoic acid to enrich tin and lead species from 10 mL sample, detection limits were improved to 2-8 pg per liter due to satisfactory enrichment factors (522-2848 folds). The SPE-HPLC-ICP-MS method was applicable to quantification of ultra-trace tin and lead species at pg L-1 levels in uncontaminated seawater. Tributyltin was the only tin species detected at subnanograms per liter levels while Pb(II) was the only lead species detected at several nanograms per liter in thirteen coastal seawater samples collected in Hangzhou Bay, indicating light contamination of tin and lead.

SIGNIFICANCE

Overall, the proposed SPE-HPLC-ICP-MS method is highly sensitive, efficient and environment-friendly that are fairly suitable to routine speciation analysis of tin and lead in environmental, food, and biological samples.

Polymeric Materials in Speciation Analysis Based on Solid-Phase Extraction

Speciation analysis is a relevant topic since the (eco)toxicity, bioavailability, bio (geo)chemical cycles, and mobility of a given element depend on its chemical forms (oxidation state, organic ligands, etc.). The reliability of analytical results for chemical species of elements depends mostly on the maintaining of their stability during the sample pretreatment step and on the selectivity of further separation step. Solid-phase extraction (SPE) is a matter of choice as the most suitable and widely used procedure for both enrichment of chemical species of elements and their separation. The features of sorbent material are of great importance to ensure extraction efficiency from one side and selectivity from the other side of the SPE procedure. This review presents an update on the application of polymeric materials in solid-phase extraction used in nonchromatographic methods for speciation analysis.

Simultaneous speciation analysis of Hg and Se in fish by high-performance liquid chromatography and inductively coupled plasma-mass spectrometry following microwave-assisted enzymatic hydrolysis

This study reports the development and validation of a new analytical method for simultaneous speciation analysis of Se and Hg in fish muscle. For this purpose, four Se species (selenite/Se(IV), selenate/Se(VI), selenomethionine/SeMet, and selenocysteine/SeCys) and two Hg species (inorganic mercury/iHg and methylmercury/MeHg) were extracted simultaneously by microwave-assisted enzymatic hydrolysis and then separated by HPLC in less than 15 min by using a column with both anion and cation exchange mechanisms and a mobile phase consisting of a mixture of methanol 5% (v/v), 45 mM HNO3, 0.015% 2-mercaptoethanol, and 1.5 mM sodium 3-mercapto-1-propanesulfonate. The separated species of Hg and Se were detected online by inductively coupled plasma-mass spectrometry (ICP-MS). The speciation analysis method was validated by means of the accuracy profile approach by carrying out three series of measurements in duplicate on three different days over a time-span of 3 weeks. The limits of quantification (LOQ) are in the range of 0.010-0.013 mg/kg wet weight (ww) for all selenium species, except for Se(IV) (0.15 mg/kg ww), while the coefficient of variation in terms of intermediate reproducibility (CVR) was < 7%. The LOQ for MeHg was 0.006 mg/kg ww, while the CVR was 3%. The method was successfully applied to the analysis of muscle samples from four different fish species: rainbow trout, tuna, swordfish, and dogfish.

TiO2 nanoparticle-Coated 3D-Printed porous monoliths enabling highly sensitive speciation of inorganic Cr, As, and Se

Post-printing functionalization can enhance the functionality and applicability of analytical devices manufactured using three-dimensional printing (3DP) technologies. In this study we developed a post-printing foaming-assisted coating scheme-through respective treatments with a formic acid (30%, v/v) solution and a sodium bicarbonate (0.5%, w/v) solution incorporating titanium dioxide nanoparticles (TiO2 NPs; 1.0%, w/v)-for in situ fabrication of TiO2 NP-coated porous polyamide monoliths in 3D-printed solid phase extraction columns, thereby enhancing the extraction efficiencies of Cr(III), Cr(VI), As(III), As(V), Se(IV), and Se(VI) for speciation of inorganic Cr, As, and Se species in high-salt-content samples when using inductively coupled plasma mass spectrometry. After optimizing the experimental conditions, the 3D-printed solid phase extraction columns with the TiO2 NP-coated porous monoliths extracted these species with 5.0- to 21.9-fold enhancements, relative to those obtained with the uncoated monolith, with absolute extraction efficiencies ranging from 84.5 to 98.3% and method detection limits ranging from 0.7 to 32.3 ng L-1. We validated the reliability of this multi-elemental speciation method through determination of these species in four reference materials [CASS-4 (nearshore seawater), SLRS-5 (river water), 1643f (fresh water), and Seronorm Trace Elements Urine L-2 (human urine); relative errors between certified and measured concentrations: 5.6 to +4.0%] and spike analyses of seawater, river water, agriculture waste, and human urine samples (spike recoveries: 96-104%; relative standard deviations of these measured concentrations all below 4.3%). Our results demonstrate that post-printing functionalization has great potential for future applicability in 3DP-enabling analytical methods.

A broad-applicability method for mercury speciation in various seafoods using microwave-assisted extraction and ion chromatography-inductively coupled plasma mass spectrometry

Almost all marine organisms contain both inorganic and organic mercury, and thus it is extremely important to determine mercury species in seafood to objectively and scientifically assess the health risk posed by mercury. We herein developed a broad-applicability microwave-assisted extraction method and a robust ion chromatography-inductively coupled plasma mass spectrometry (IC-ICP-MS) method for the speciation analysis of mercury in various seafood samples including seaweeds, fishes and shellfishes. The extraction method has broad adaptability, it can be used to simultaneously extract mercury species from various seafood samples including seaweeds, fishes and shellfishes without altering the chemical species of mercury, with an extraction efficiency >90%. Especially, the seafood extract obtained with the extraction method can be directly used for the following IC-ICP-MS determination of mercury species without additional pretreatment. The IC-ICP-MS method used low-cost cation guard columns as the separation column, and has an instrument detection limit of 0.02-0.05 ng mL^-1 for Hg²⁺, CH₃Hg⁺ and C₂H₅Hg⁺. The developed extraction and IC-ICP-MS methods have been successfully used to determine Hg²⁺, CH₃Hg⁺ and C₂H₅Hg⁺ in various seaweeds, fishes and shellfishes without the matrix effect, with a method detection limit of 2.4-6.0 ng g^-1 dried weight, a recovery of 92-105%, and a relative standard deviation (RSD, n = 5) of less than or equal to 6%. The success of this study offers a reliable and universal approach for the speciation analysis of mercury in seafood, which may provide the database for objectively assessing the health risks of mercury in seafood and ensuring the safety of consumption of seafood.

Speciation analysis of manganese against the background of its different content in the blood serum of dairy cows

Studies in the field of microelement speciation in the body of farm animals, in particular dairy cattle, are almost completely absent. The average concentration of Mn in the blood serum of all the studied animals (n = 80) was 2.5 μg/L, which corresponds to normal values. Of the total number of animals, 21% were the cows with the low normal values (serum Mn concentration ≤ 2 µg/L, i.e. less than Q25 of the total sample) and 25% were the animals with the high normal values (serum Mn concentration ≥ 2.72 µg/L, i.e. more than Q75 of the total sample). The data obtained in the course of the study indicate that the change in the Mn level, even in the range of normal values, is accompanied by the redistribution of this element over various protein fractions. The six found Mn blood serum forms are presumably represented by α2-macroglobulin (tetramer, dimer, and monomer), transferrin/albumine, manganese citrates, and "free" metal ions. The analyzed fractions of Mn found in the blood serum of cows had the following hierarchy of concentrations: in the group with low-normal values of Mn ("free" Mn >> tetrameric form of α2-macroglobulin >> transferrin/albumine >> dimeric form of α2-macroglobulin >> monomeric form of α2-macroglobulin >> citrate), in the group with high normal manganese values ("free" Mn >> monomeric form of α2-macroglobulin >> transferring/albumine >> citrate >> tetrameric form of α2-macroglobulin >> dimeric form of α2-macroglobulin). In the group with high normal Mn values relative to the group with low normal values, there was a percentage decrease in the tetrameric fraction of a2-macroglobulin from 17.2 to 4.4%, dimeric fraction of a2-macroglobulin from 6.9 to 2.2%, "free" Mn from 54.3 to 44.4% and an increase in monomeric fraction of a2-macroglobulin from 6.7 to 23.1%, transferrin/albumine from 10.1 to 17.7%, citrate from 4.8 to 8.2%. Our data demonstrate the features of Mn redistribution of dairy cows, which can be used for an extended assessment of the microelement status of animals.

Strategies for mercury speciation with single and multi-element approaches by HPLC-ICP-MS

Mercury (Hg) and its compounds are highly toxic for humans and ecosystems, and their chemical forms determine both their behavior and transportation as well as their potential toxicity for human beings. Determining the various species of an element is therefore more crucial than understanding its overall concentration in samples. For this reason, several studies focus on the development of new analytical techniques for the identification, characterization, and quantification of Hg compounds. Commercially available, hyphenated technology, such as HPLC-ICP-MS, supports the rapid growth of speciation analysis. This review aims to summarize and critically examine different approaches for the quantification of mercury species in different samples using HPLC-ICP-MS. The steps preceding the quantification of the analyte, namely sampling and pretreatment, will also be addressed. The scenarios evaluated comprehend single and multi-element speciation analysis to create a complete guide about mercury content quantification.

[Magnetic ion imprinting techniques for the separation and analysis of elemental speciation]

Metal and metalloid elements have various possible isotopic compositions and oxidation states and often form coordination or covalent compounds with inorganic and organic small molecules or biological macromolecules, resulting in complex elemental speciation. Different species of the same element often have different properties, which dictate their behavior. Thus, elemental speciation analysis is vital for comprehensively and accurately assessing an element's environmental and biological effects and the corresponding risks. Because elemental speciation determines the behavior of an element in different environmental and biological processes, the analysis of elemental species has, in recent years, been important in various subjects, including analytical chemistry, environmental chemistry, geochemistry, ecology, agronomy, and biomedicine. The complexity of environmental and biological sample matrices, as well as the multiformity, low levels, and lability of chemical forms pose severe challenges in elemental speciation analysis. Therefore, the highly selective identification and efficient separation of native species is necessary for conducting the identification, quantification, ecotoxicity evaluation, and physiological function study of elemental speciation. Sample pretreatment by solid-phase extraction is an effective solution to the aforementioned problems, but the existing methods do not meet the requirements of current research. The transition of the target species from pre-processing to the detection device includes both on- and off-line arrangements. Compared with the on-line approach, the off-line approach requires more manual participation, increasing the analysis workload. However, the off-line approach can improve the analysis efficiency through high-throughput pretreatment when large batches of samples are encountered, meaning the off-line approach is still an effective model. Ion imprinting technology has been developed based on existing molecular imprinting technology, with four main steps present in the synthesis of ion imprinted polymers. First, ion imprinting technology uses metal ions as templates. Then, these templates are combined with the functional monomers through coordination, electrostatic or hydrogen bonding. The functional monomers simultaneously surround and fix the templates, after which the cross-linkers and functional monomers polymerize to prepare ion-imprinted polymers with a specific structure and composition. Finally, the imprinted holes are created in the polymers by eluting the template ions. Therefore, the template molecules, functional monomers, and cross-linkers are three precursors necessary for synthesizing ion-imprinted polymers. These polymers can specifically bind to the imprinted metal ions with accuracy, sensitivity, and reliability. In recent years, they have been widely used in separating, enriching, analyzing, and detecting elemental species. During solid-phase extraction, the non-magnetic adsorbent materials dispersed in the sample solution need to be separated by centrifugation or filtration, which is time-consuming and laborious. Because an external magnetic field can be used for rapid magnetic solid-phase extraction, it has become a potential method for separating and enriching elemental species. This review systematically summarizes the latest progress in ion-imprinting technology, including its principle and the preparation methods of ion-imprinted polymers. The challenges faced by ion imprinting technology are analyzed in the context of the development of ion-imprinting magnetic solid-phase extraction in elemental speciation analysis. Finally, the direction of future development and the strategies of ion imprinting technology in elemental speciation analysis are proposed. It is important to exploit novel organic-inorganic hybrid polymerization-based multifunctional ion-imprinted magnetic nanocomposites for the magnetic solid-phase extraction and separation of elemental species. By establishing the pretreatment protocols with high recognition selectivity, strong separation ability, large adsorption capacity, and good speciation stability, we expect to achieve the research objectives of simultaneously separating and enriching the multiple-species of typical metal/metalloid elements in environmental and biological samples.

Simultaneous speciation of chromate, molybdate and arsenate in lysimetric water from geotechnical composites installed in field lysimeters

Anion-exchange high performance liquid chromatography inductively coupled plasma mass spectrometry (HPLC-ICP-MS) was used for simultaneous speciation of chromate, molybdate and arsenate. The repeatability of measurement tested for multielemental standard solution of chromate, molybdate and arsenate (50 ng mL⁻¹ of Cr, Mo and As, pH 12) was ± 0.9%, ± 4.9% and ± 4.1%, respectively. Limits of quantification (LOQs) were low (0.53 ng mL⁻¹ for chromate and arsenate and 1.03 ng mL⁻¹ for molybdate, expressed as elemental concentrations). A wide linear concentration range (from LOQs to 500 ng mL⁻¹) was obtained. The performances of this method enabled simultaneous speciation analysis in samples of water from lysimeters, in which three geotechnical composites, made of recycled waste, were installed in parallel in compacted and uncompacted, 20 times less dense form. The release of toxic chemical species of elements into lysimetric waters from each composite was studied. The results revealed that the degree of compaction and the composition of composites both have a significant influence on leaching of chromate, molybdate and arsenate. The study proved that multielemental speciation analysis is fast and cost-effective method for investigations of environmental impacts of materials, made from recycled waste, and can be used in other similar applications.

A High-Detection-Efficiency Optoelectronic Device for Trace Cadmium Detection

Cadmium (Cd) pollution in soil is a serious threat to food security and human health, while, currently, the most widely used detection methods cannot accurately reflect the content of heavy metals in soil. Soil heavy metal detection combined with microelectronic sensors has become an important means of environmental heavy metal pollution prevention and control. X-ray Fluorescence spectrometry (XRF) can capture the excitation spectrum of metal elements, which is often used to detect Cd (II). However, due to the lack of high-performance optoelectronic devices, the analysis accuracy of the system cannot meet the requirements. Therefore, this study proposes a high-detection-efficiency photodiode (HDEPD) which can effectively improve the detection accuracy of the analyzer. The HDEPD is manufactured based on a 0.18 μm standard complementary metal-oxide-semiconductor (CMOS) process. The volt-ampere curve, spectral response and noise characteristics of the device are obtained by constructing a test circuit combined with a spectral detection system. The test results show that the threshold voltage of HDEPD is 12.15 V. When the excess bias voltage increases from 1 V to 3 V, the spectral response peak of the device appears at 500 nm, and the photon detection probability (PDP) increases from 41.7% to 52.8%. The dark count rate (DCR) is 31.9 Hz/μm² at a 3 V excess bias voltage. Since the excitation spectrum peak of Cd (II) is between 500 nm and 600 nm, the wavelength response range of HDEPD fully meets the detection requirements of Cd (II).

Ultratrace mercury speciation analysis in rice by in-line solid phase extraction - liquid chromatography - atomic fluorescence spectrometry

For the first time, Hg²⁺ and methylmercury speciation analysis was accomplished by in-line SPE-LC-AFS. After modification with 0.1 mL of 0.001% (m:v) sodium diethyldithiocarbamate, a C₁₈ microcolumn retained Hg²⁺ and MetHg in rice extract within 3 min; the captured Hg species were separated within 12 min in 0.25% (v:v) 2-mercaptoethanol + 60 mmol L^-1 (m:v) ammonium acetate + 4% (v:v) acetonitrile. Under optimized conditions, the detection limits were 0.3 ng L^-1 for Hg²⁺ and 0.2 ng L^-1 for MetHg, respectively, with 10 mL injection vs. 0.1 mL eluent; in-line SPE achieved ∼ 100x enrichment. Method precision and accuracy were satisfactory at < 2% relative standard deviations (RSDs) for 20 ng L^-1 of Hg²⁺ and MetHg and 95-102% recoveries for real rice samples. In-line SPE obviated human involvement and avoided invalid transportation between interfaces, rendering this SPE-LC-AFS method easy, compact, robust, yet sensitive in mercury speciation analysis to uphold food safety.

Simple and Fast Two-Step Fully Automated Methodology for the Online Speciation of Inorganic Antimony Coupled to ICP-MS

A very simple, fast and non-chromatographic methodology for inorganic antimony speciation based on Multisyringe Flow Injection Analysis (MSFIA) employing online hydride generation (HG) ICP-MS was developed. The fully automated analysis is performed in two steps: firstly, Sb(III) is quantified by ICP-MS after chemical vapor generation; then, total antimony is determined in the presence of potassium iodide as a pre-reducer of Sb(V) to Sb(III). The Sb(V) concentration is quantified by the difference between the total antimony and Sb(III) concentrations, reaching an analysis frequency of 30 h−1. The optimization was performed using a Box Behnken design. The MSFIA-HG-ICP-MS system allows the antimony speciation analysis with a detection limit of 0.016 µg L−1 for Sb(III), working in a linear range of 0.053 to 5.0 µg L−1. This method was applied for the determination of Sb(III) and Sb(V) in water samples from Maiorca Island, Spain, and the concentrations found varied from 0.10 to 0.14 µg L−1 for Sb(III) and from 0.12 to 0.28 µg L−1 for Sb(V). The results were validated by addition/recovery tests, obtaining recoveries between 90 and 111% in both cases. Furthermore, a good precision was achieved, 1.4% RSD, and sample and reagent consumption were reduced to a few mL, with the consequent decrease in waste generation. Thus, the proposed method is a good tool for the speciation of inorganic antimony at ultra-trace levels in waters, allowing its risk assessment.

LC/ICP-MS AND COMPLEMENTARY TECHNIQUES IN BESPOKE AND NONTARGETED SPECIATION ANALYSIS OF ELEMENTS IN FOOD SAMPLES

Chemical elements speciation analysis of food samples has been among the most important scientific topics over the last decades. Food samples are comprised of high variety of chemical compounds, from which many can interact with metals and metalloids, forming complex elemental species with various influence on the human body. It is particularly important not only to determine the amount of certain chemical element in food sample but also to identify the form in which given element occurs in given sample. Employment of bespoke and nontargeted speciation methods, with the use of liquid chromatography inductively coupled plasma mass spectrometry (LC/ICP-MS) and complementary techniques, provides more complete picture on the metals and metalloids speciation in food. This review discusses issues concerning speciation analysis of metals and metalloids in food samples with the use of LC/ICP-MS as a leading technique in elemental speciation nowadays and a complimentary technique intended for their identification. © 2020 John Wiley & Sons Ltd. Mass Spec Rev.

Fe3O4–SiO2–graphene oxide–amino acid ionic liquid magnetic solid-phase extraction combined with inductively coupled plasma optical emission spectrometry for speciation of Cr(iii) and Cr(vi) in environmental water

This developed method, based on the combination of functionalized Fe3O4–SiO2–GO–AAIL and ICP-OES, is capable of remarkable selectivity towards Cr(iii).

Improving Calibration Strategy for LIBS Heavy Metals Analysis in Agriculture Applications

A new calibration procedure, known as mapping conditional-calibration laser-induced breakdown spectroscopy (LIBS), has been suggested to improve analysis results for heterogeneous samples. The procedure is based on LIBS elemental mapping, followed by signal conditioning in every sampling spot to skip signal outliers, then by finalizing the calibration curve construction. The suggested mapping conditional calibration procedure was verified for zinc analysis in soybean grist samples. The laser parameters correspond to those of the hand-held LIBS instrument in order to estimate the influence of sample surface heterogeneity under on-site analysis conditions. The laser spot (60 μm) was equal to or smaller than the typical size of grist particles (40–500 μm) but laser crater dimensions were significantly greater and varied widely (150–450 μm). The LIBS mapping of different spectral signals (atomic and ionic lines for major and minor components) was achieved. Elemental maps were normalized to achieve signal maps that were conditionally spotted to skip signal outliers. It was demonstrated that the suggested mapping conditional-calibration LIBS provided 15 ppm RMSECV for zinc determination in heterogeneous samples, which is typical for agricultural products.

Elemental Speciation Analysis in Environmental Studies: Latest Trends and Ecological Impact

Speciation analysis is a key aspect of modern analytical chemistry, as the toxicity, environmental mobility, and bioavailability of elemental analytes are known to depend strongly on an element’s chemical species. Henceforth, great efforts have been made in recent years to develop methods that allow not only the determination of elements as a whole, but also each of its separate species. Environmental analytical chemistry has not ignored this trend, and this review aims to summarize the latest methods and techniques developed with this purpose. From the perspective of each relevant element and highlighting the importance of their speciation analysis, different sample treatment methods are introduced and described, with the spotlight on the use of modern nanomaterials and novel solvents in solid phase and liquid-liquid microextractions. In addition, an in-depth discussion of instrumental techniques aimed both at the separation and quantification of metal and metalloid species is presented, ranging from chromatographic separations to electro-chemical speciation analysis. Special emphasis is made throughout this work on the greenness of these developments, considering their alignment with the precepts of the Green Chemistry concept and critically reviewing their environmental impact.

Three-Dimensional Printed Dual-Mode Chemical Vapor Generation Point Discharge Optical Emission Spectrometer for Field Speciation Analyses of Mercury and Inorganic Selenium

Due to the large size and high energy consumption of instruments, field elemental speciation analysis is still challenging so far. In this work, a portable and compact system device (230 mm length × 38 mm width × 84 mm height) was fabricated by using three-dimensional (3D) printing technology for the field speciation analyses of mercury and inorganic selenium. The device comprises a cold vapor generator, photochemical vapor generator, and miniaturized point discharge optical emission spectrometer (μPD-OES). For mercury, inorganic mercury (IHg) was selectively reduced to Hg⁰ by cold vapor generation, whereas the reductions of both IHg and methylmercury (MeHg) were obtained by photochemical vapor generation (PVG) in the presence of formic acid. For selenium, Se(IV) and total inorganic selenium were converted to their volatile species by PVG in the presence and the absence of nano-TiO₂, respectively. The generated volatile species were consequently detected by μPD-OES. Limits of detection of MeHg, IHg, Se(IV), and Se(VI) were 0.1, 0.1, 5.2, and 3.5 μg L^-1, respectively. Precision expressed as the relative standard deviations (n = 11) were better than 4.5%. The accuracy and practicality of the proposed method were evaluated by the analyses of Certified Reference Materials (DORM-4, DOLT-5, and GBW(E)080395) and several environmental water samples with satisfactory recoveries (95-103%). This work confirms that 3D printing has great potential to fabricate a simple, miniaturized, easy-to-operate, and low gas and power consuming atomic spectrometer for field elemental speciation analysis.

One-minute highly selective Cr(VI) determination at ultra-trace levels: An ICP-MS method based on the on-line trapping of Cr(III)

An analytical method derived from the coupling of frontal chromatography (FC) with Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) is proposed for the fast determination of Cr(VI) ultra-traces. The insertion of a short, homemade column filled with a strong cationic exchange resin in the flow-path of a commercial ICP-MS allows on-line trapping of cationic Cr(III) and elution of anionic Cr(VI). As a result, only the Cr(VI) front reaches the detector. This separation mechanism enables the highly selective quantification of Cr(VI) ultra-traces (LOD = 0.026 µg/kg - defined as 3 s of 10 replicated measurements of a 0.050 µg/kg solution) over a wide linearity range (tested up to 1024 µg/kg), even in the presence of Cr(III) concentration as high as 50 mg/kg. Key advantages of the proposed method are the extremely short analysis time (one minute), together with the simplicity and cost-effectiveness of the modifications applied over a commercial ICP-MS instrumental configuration. No time- or chemical-consuming pretreatments are needed: it is only necessary to acidify the sample prior Cr(VI) determination, as normally performed for common ICP-MS analysis. The applicability of the method was demonstrated over mineral water samples and toy migration solutions.

Analytical Methodologies for Agrometallomics: A Critical Review

Agrometallomics, as an independent interdiscipline, is first defined and described in this review. Metallic elements widely exist in agricultural plants, animals and edible fungi, seed, fertilizer, pesticide, feedstuff, as well as the agricultural environment and ecology, and even functional and pathogenic microorganisms. So, the agrometallome plays a vital role in molecular and organismic mechanisms like environmetallomics, metabolomics, proteomics, lipidomics, glycomics, immunomics, genomics, etc. To further reveal the inner and mutual mechanism of the agrometallome, comprehensive and systematic methodologies for the analysis of beneficial and toxic metals are indispensable to investigate elemental existence, concentration, distribution, speciation, and forms in agricultural lives and media. Based on agrometallomics, this review summarizes and discusses the advanced technical progress and future perspectives of metallic analytical approaches, which are categorized into ultrasensitive and high-throughput analysis, elemental speciation and state analysis, and spatial- and microanalysis. Furthermore, the progress of agrometallomic innovativeness greatly depends on the innovative development of modern metallic analysis approaches including, but not limited to, high sensitivity, elemental coverage, and anti-interference; high-resolution isotopic analysis; solid sampling and nondestructive analysis; metal chemical species and metal forms, associated molecular clusters, and macromolecular complexes analysis; and metal-related particles or metal within the microsize and even single cell or subcellular analysis.

Selected Instrumental Techniques Applied in Food and Feed: Quality, Safety and Adulteration Analysis

This review presents an overall glance at selected instrumental analytical techniques and methods used in food analysis, focusing on their primary food science research applications. The methods described represent approaches that have already been developed or are currently being implemented in our laboratories. Some techniques are widespread and well known and hence we will focus only in very specific examples, whilst the relatively less common techniques applied in food science are covered in a wider fashion. We made a particular emphasis on the works published on this topic in the last five years. When appropriate, we referred the reader to specialized reports highlighting each technique's principle and focused on said technologies' applications in the food analysis field. Each example forwarded will consider the advantages and limitations of the application. Certain study cases will typify that several of the techniques mentioned are used simultaneously to resolve an issue, support novel data, or gather further information from the food sample.

Simultaneous enrichment of inorganic and organic species of lead and mercury in pg L-1 levels by solid phase extraction online combined with high performance liquid chromatography and inductively coupled plasma mass spectrometry

Quantification of ultra-trace inorganic and organic species of lead and mercury in unpolluted environmental water is crucial to estimate the mobility, toxicity and bioavailability and interactions. Simultaneous pre-concentration of Pb and Hg species in pg L^-1 levels followed by multi-elemental speciation analysis makes great sense to a large set of unstable samples because of time advantages. Herein simultaneous enrichment and speciation analysis of ultra-trace lead and mercury in water was developed by online solid-phase extraction coupled with high performance liquid chromatography and inductively coupled plasma mass spectrometry (SPE-HPLC-ICP-MS) for this aim. Pb(II), trimethyl lead (TML), triethyl lead (TEL), Hg(II), methylmercury (MeHg) and ethylmercury (EtHg) were baseline separated in 11 min under gradient elution using 5 mM l-cysteine (Cys) at pH 2.5 in the 0-1 and 4-15 min and 5 mM Cys + 0.5 mM tetrabutyl ammonium hydroxide solution at pH 2.5 in the 1-4 min. Lead and mercury species in 10 mL intact water samples were adsorbed on a 1 cm C₁₈ enrichment column pre-conditioned with 10 mL of 1 mM 2-mercaptoethanol at 10 mL min^-1, and then directly desorbed by the mobile phases. High enrichment factors (459 for Pb(II), 1248 for TML, 1627 for TEL, 2485 for Hg(II), 1984 for MeHg and 1866 for EtHg) were obtained with good relative standard deviations (<5%), leading to low LODs (0.001-0.011 ng L^-1) and LOQs (0.004-0.036 ng L^-1). Good accuracy of this method was validated by two certified reference materials of total lead in water (GBW08601) and total mercury in water (GBW08603) along with spiked recoveries (89-93%). The method was applied to analyze trace lead and mercury species in river, lake, tap and rain water, and purified and mineral water. Inorganic lead of 13-68 ng L^-1 and inorganic mercury of 21-49 ng L^-1 were measured in the nine water samples whereas TML, TEL and MeHg were not detected with 2-5 ng L^-1 EtHg presented only in one river water and tap water.

Ti (IV) modified vinyl phosphate magnetic nanoparticles for simultaneous preconcentration of multiple arsenic species from chicken samples followed by HPLC-ICP-MS analysis

Ti (IV)-modified vinyl phosphate magnetic nanoparticles (Fe₃ O₄ @SiO₂ @KH570-PO₄ -Ti (IV)) was prepared for simultaneous extraction of multiple arsenic species, followed by high performance liquid chromatography (HPLC)- inductively coupled plasma mass spectrometry (ICP-MS) analysis. Inorganic arsenic (iAs), dimethyl arsenic acid (DMA), monomethyl arsenic acid (MMA), p-amino phenyl arsenic acid (p-ASA), 4-hdroxyphenylarsenic acid (4-OH), phenyl arsenic acid (PAA), and 3-nitro-4-hydroxyphenylarsenic acid (ROX) were investigated as interest analytes. It was found that they were quantitatively adsorbed on Fe₃ O₄ @SiO₂ @KH570-PO₄ -Ti (IV) at pH 5, and desorbed completely with 0.1 mol/L sodium hydroxide solution. Enrichment factor of 100-fold was obtained by consuming 100 mL sample solution. Under the optimal conditions, the method combining MSPE with HPLC-ICP-MS presented a linear range of 1-5000 ng/L for seven arsenic species. The limits of detection were 0.39, 0.60, 0.23, 1.85, 0.54, 0.48, and 0.84 ng/L for DMA, MMA, p-ASA, iAs, 4-OH, PAA, ROX, with the relative standard deviations (c = 10 ng/L, n = 7) of 3.6, 3.9, 5.5, 12.4, 6.1, 5.8, 5.0, respectively. The accuracy of the method was validated by analyzing BCR 627 Tuna fish. The application potential of the method was further evaluated by chicken muscle and liver samples. No target arsenic species were detected in these samples, and good recoveries (80.6-123%) were obtained for the spiked samples at low, medium, and high concentration levels.

Review of the distribution and detection methods of heavy metals in the environment

Heavy metals can be enriched in living organisms and seriously endanger human health and the ecological environment, which has evolved into a significant global environmental problem. Based on summarizing the spatial distribution of heavy metals in the environment, this review introduces heavy metal detection technologies such as inductively coupled plasma mass spectrometry/atomic emission spectrometry, atomic absorption spectrometry, atomic fluorescence spectrometry, and laser-induced breakdown spectrometry. It summarizes their respective advantages, characteristics, and applicability. Besides, atmospheric pressure discharge plasma as a potential heavy metal detection technology is also introduced and discussed in this review. The current research mainly focuses on improving the analytical performance and optimizing the practical application. Furthermore, this review not only summarizes the advantages of atmospheric pressure discharge plasma in the field of element analysis but also summarizes the principal scientific and technical problems to be solved urgently.

Non-steroidal anti-inflammatory drugs in the environment: Where were we and how far we have come?

Non-steroidal anti-inflammatory drugs (NSAIDs) are among the most well-known pharmaceuticals with a broad scope of properties that are widely used in human and veterinary medicine. Because of their extensive utilization, NSAIDs are commonly identified in the environment as trace emerging contaminants. Regardless of vast experience with these drugs, NSAIDs are full of contradictions that trigger major concerns for environmental researchers. A limited understanding on NSAID's occurrence, distribution and eco-toxicological effects have led to an escalated dilemma in the last decade. Thus, a broad-spectrum study covering all aspects of occurrence, detection and removal is required to meet the fundamental levels of knowledge on the effects of NSAIDs in all exposed environmental aspects. Therefore, this paper focuses on classifying the sources and entry points of residual NSAIDs. Further, detecting and regulating their concentrations in both input streams and receiving environments, along with the removal processes of this specific class of emerging compounds, in the direction of developing a management policy is comprehensively reviewed.

Electroanalysis from the past to the twenty-first century: challenges and perspectives

A personal mini-review is presented on the history of electroanalysis and on their present achievements and future challenges. The manuscript is written from the subjective view of two generations of electroanalytical chemists that have witnessed for many years the evolution of this discipline.

Selenium in plant foods: speciation analysis, bioavailability, and factors affecting composition

Interest in selenium has been increasing over the past few decades with growing knowledge of its importance to overall health. The ability of several plants to accumulate and transform inorganic selenium forms into its bioactive organic compounds has important implications for human nutrition and health. In this review, we present the studies carried out during the last decade to characterize selenium species produced by different plant foods. Attention is also paid to the effect of selenium treatment on chemical composition and antioxidant properties of plants.

Arsenic and arsenic speciation in mushrooms from China: A review

Arsenic (As) is a natural environmental contaminant to which humans are usually exposed in water, air, soil, and food. China is a typical high-As region, and also a great contributor of the world production of cultivated edible mushrooms and a region abundant in wild growing edible mushrooms. Mushrooms can accumulate different amounts of As and different As compounds, so potential health risk of As intake may exist to people who use mushrooms with elevated As contents as food or medicine. A systematic literature search was carried out for studies on As and As compounds in mushrooms from China. We compiled existing data from published sources in English or Chinese and provide an updated review of the findings on As in mushrooms associated with environments and health risks. Future perspectives for studies on As in mushrooms have also been discussed.

Total Versus Inorganic and Organic Species of As, Cr, and Sb in Flavored and Functional Drinking Waters: Analysis and Risk Assessment

Packing material can release certain elements such as As, Cr, or Sb into its content and, thus, contaminate the drinking water. The effect of As, Cr, and Sb on human health depends highly on the chemical species in which these elements are introduced into the body. For the above reasons quantification and speciation of As, Cr, and Sb in flavored and functional drinking water samples is an important issue. Total, inorganic, and organic species of As, Cr, and Sb including As(III), As(V), Cr(VI), Sb(III), and Sb(V) were studied in flavored and functional drinking waters. Analyses of total As, Cr, and Sb were conducted using inductively coupled plasma mass spectrometry (ICP-MS) according to ISO 17294-2:2016. The speciation analysis of arsenic, chromium, and antimony in bottled flavored and functional drinking waters was conducted with the use of the elemental (HPLC/ICP dynamic reaction cell (DRC) MS) and molecular (electrospray ionization MS/MS) mass spectrometry. Concentrations of total As, Cr, and Sb (µg∙L⁻¹) in waters studied were in the ranges 0.0922 ± 0.0067 to 8.37 ± 0.52, 0.0474 ± 0.0014 to 1.310 ± 0.045, and 0.0797 ± 0.0026 to 1.145 ± 0.019, respectively. Speciation analysis showed that, apart from the toxic ionic species, known and unknown organic species were present in test samples. The risk assessment results proved that there is no risk associated with consumption of these tested beverages in terms of the non-carcinogenic effect of total and inorganic or organic species of As, Cr, and Sb.

Nanomaterials in speciation analysis of metals and metalloids

Nanomaterials have draw extensive attention from the scientists in recent years mainly due to their unique and attractive thermal, mechanical and electronic properties, as well as high surface to volume ratio and the possibility for surface functionalization. Whereas mono functional nanomaterials providing a single function, the preparation of core/shell nanoparticles allows different properties to be combined in one material. Their properties have been extensively exploited in different extraction techniques to improve the efficiency of separation and preconcentration, analytical selectivity and method reliability. The aim of this paper is to provide an updated revision of the most important features and application of nanomaterials (metallic, silica, polymeric and carbon-based) for solid phase extraction and microextraction techniques in speciation analysis of some metals and metalloids (As, Cr, Sb, Se). Emphasis will be placed on the presentation of the most representative works published in the last five years (2015-2019).

Molecular identification guided process design for advanced treatment of electroless nickel plating effluent

It has been long desired but challenging to forward the advanced treatment of wastewater from empirical trials towards scientific design due to the lack of molecular insight into the pollutants of concern. Herein, we first established a systematic methodology to identify the ligands of Ni(II)-complexes in an electroless nickel (EN) plating effluent. The presence of N-containing groups in the ligands of most Ni(II)-complexes was verified by time-aligned ICP-MS and ESI-HRMS, implying the suitability of autocatalytic ozonation for efficient decomplexation. Thereby, a combined process was proposed on the basis of ozonation to achieve over 83% decomplexation of Ni(II) (initially at 0.36 mg/L), followed by selective Ni(II) sequestration for resource recovery. Combinational LC-MS systems revealed the ozonation-induced fragmentation or elimination of most Ni(II)-complexes as well as the structural change of the residual complexed molecules. The released free Ni(II) was further sequestrated by a nanocomposite of hydrated Zr(IV) oxide confined in a polymeric cation exchanger (nHZO@PCE). The fixed-bed working capacity of nHZO@PCE (∼550 BV) for the ozonated EN plating effluent was over 18 times that of the cation exchanger host (∼30 BV) at the breakthrough point of 0.10 mg Ni/L. More attractively, five adsorption-regeneration cycles demonstrated the great potential of the hybrid adsorbent for sustainable utilization. This study is believed to shed new light on how to design rational processes for advanced treatment of real wastewater based on molecular identification.

Arsenic Species in Cordyceps sinensis and Its Potential Health Risks

High arsenic residues make Cordyceps sinensis a concern in China. Arsenic toxicity is related to its species. Many studies have evaluated the toxicity of total arsenic, but few have studied its species. In this study, the species of arsenic in C. sinensis and its potential health risk were investigated. SEC-HPLC-ICP-MS was used to analysis of arsenic in C. sinensis and unknown arsenic (uAs) was discovered. Additionally, arsenic in C. sinensis was mainly found in alkali-soluble proteins. The trend of arsenic transformation indicated that unknown arsenic in C. sinensis may be converted into free inorganic arsenic, which enhanced toxicity. The result of risk assessment indicated that there were potential health risks of uAs. Hereon, we proposed recommendations for the use of C. sinensis and regulatory recommendations for arsenic standards. This study contributed to the toxicity reveal, safety evaluation, and risk assessment of arsenic in C. sinensis.