Graphene-like carbon nanosheets as a new electrode material for electrochemical determination of hydroquinone and catechol

Facile Layer Diffusion Technique for Synthesis of Terbium-Based Metal Organic Framework for Fluorometric Sensing of Hydroquinone

A photoluminescent terbium (III)-based Metal Organic Framework (MOF) was synthesized at room temperature by layer diffusion method utilizing mixed carboxylate linkers (4,4'-oxybis(benzoic acid) and benzene-1,3,5 tricarboxylic acid). Synthesized MOF has crystalline nature and rod-shaped morphology and is thermally stable up to 455 °C. The fluorescence emission spectra and theoretical results revealed that carboxylate linkers functioned as sensitizers for Tb(III) photoluminescence which resulted in four distinct emission peaks at 495, 547, 584, and 621 nm corresponding to the transitions 5D4 → 7F6, 5D4 → 7F5, 5D4 → 7F4, and 5D4 → 7F3. Using synthesized MOF as fluorescent probe, hydroquinone was detected in aqueous medium with a detection limit of 0.048 μM, remarkable recovery (95.6-101.1%), and relative standard deviation less than 2.25%. The quenching phenomenon may be ascribed to electron transfer from synthesized probe to oxidized hydroquinone via carboxylic groups on the surface of MOF, which is further supported by photo-induced electron transfer mechanism. This study introduces a cheaper, faster, and more accurate method for hydroquinone detection.

Effect of Modification of a Laccase-Based Electrochemical Biosensor with Carbon Nanotubes on Signal Separation of Dihydroxybenzene Isomers

This work describes a new electrochemical biosensor for the simultaneous determination of catechol and hydroquinone. A laccase biorecognition layer was deposited using an innovative soft plasma polymerization technique onto a multiwalled carbon nanotube (MWCNT)-modified glassy carbon electrode (GCE) to sufficiently separate catechol (CT) and hydroquinone (HQ) oxidation peaks. The electrochemical analysis carried out for MWCNTs with various morphologies was supported by density functional theory (DFT) calculations showing differences in the electronic structures of both dihydroxybenzene isomers and the MWCNTs forming the biosensor interlayer. The best biosensor peak separation and biosensor analytical parameters were observed for the device containing 75 μg of MWCNTs with a higher internal diameter. For this laccase-based biosensor, a linearity range from 0.1 to 57 μM for catechol and 0.5 to 57 μM for hydroquinone as well as a sensitivity of 0.56 and 0.54 μA/μM for catechol and hydroquinone was observed, respectively. The limit of detection (LOD) values were 0.028 and 0.15 μM for CT and HQ, respectively. This biosensor was also characterized by good selectivity, stability, and reproducibility. It was successfully applied for the quantification of contaminants in the analysis of natural water samples.

Enhancing electrochemical sensing through the use of functionalized graphene composites as nanozymes

Graphene-based nanozymes possess inherent nanomaterial properties that offer not only a simple substitute for enzymes but also a versatile platform capable of bonding with complex biochemical environments. The current review discusses the replacement of enzymes in developing biosensors with nanozymes. Functionalization of graphene-based materials with various nanoparticles can enhance their nanozymatic properties. Graphene oxide functionalization has been shown to yield graphene-based nanozymes that closely mimic several natural enzymes. This review provides an overview of the classification, current state-of-the-art development, synthesis routes, and types of functionalized graphene-based nanozymes for the design of electrochemical sensors. Furthermore, it includes a summary of the application of functionalized graphene-based nanozymes for constructing electrochemical sensors for pollutants, drugs, and various water and food samples. Challenges related to nanozymes as electrocatalytic materials are discussed, along with potential solutions and approaches for addressing these shortcomings.

Facile synthesis of doped CxNy QDs as photoluminescent matrix for direct detection of hydroquinone

In this work, we are reporting facile hydrothermal synthesis of a highly photoluminescent doped carbon nitride quantum dots (C_xN_yQDs) and implied it for direct detection of hydroquinone (H₂Q) by photoluminescence quenching phenomenon. Oxygen and sulphur moieties are regarded as dopant species in C_xN_yQDs and sourced from cheap solid precursors viz. cysteine and maleic acid. Morphological studies of C_xN_yQDs have done by SEM and TEM techniques, while structural analysis has carried out using FTIR, XPS, EDS and UV-Visible spectroscopy. The strong tendency of dispersivity of this QD in water has revealed by its zeta potential value of -32.4 mV. Optical properties of the as-prepared QDs have optimized at different excitation wavelengths. The photoluminescence stability of the dispersion is tested in various pH solutions and under continuous UV irradiation (365 nm). After that, sensing property is observed in quenching of photoluminescence feature of as-prepared QDs by direct addition of various concentrations of H₂Q. We obtained lower detection limit (LOD) of 50 nM (S/N = 3) in linear range from 12 to 57.5 μM. The reduction in photoluminescence of QDs may be attributed to electron transfer from QDs to oxidized H₂Q via -S^- and -COO^- groups present at its surface. Further, as-prepared QDs matrix exhibited high selectivity for hydroquinone over a range of potential interfering agents. Thus, the present work shows cost-effective facile synthesis of highly stable O- and S-doped carbon nitride (C_xN_y) quantum dots as promising photoluminescent sensor for pollutant hydroquinone without help of any enzyme or polymer assisted system.

Intensification of Dihydroxybenzenes Degradation over Immobilized TiO2 Based Photocatalysts under Simulated Solar Light

The work is focused on the assessment of possible methods for intensification of photocatalytic degradation of common water borne pollutants. Solar photocatalysis poses certain limitations for large scale application with several possible reactor designs which have shown an optimal performance. In the current study, a comparison between two types of pilot scale reactors was made: a flat-plate cascade reactor (FPCR) and tubular reactor with a compound parabolic collector (CPC). Apart from the reactor design, another aspect of possible intensification was a photocatalyst formulation. The efficiency of photocatalytic films that consisted of pure TiO2 nanoparticles was compared to the efficiency of films that consisted of TiO2/CNT composites. Intensification assessment was performed via detailed kinetic modelling, combining the optical properties of films, irradiation conditions and reactor mass balance. Intensification was expressed via intensification indices. Results showed the advantage of the CPC-based reactor design and an unbiased effect of sensitizing agent (CNT) in the photocatalytic film formulation.

Simultaneous Synthesis and Nitrogen Doping of Free-Standing Graphene Applying Microwave Plasma

An experimental and theoretical investigation on microwave plasma-based synthesis of free-standing N-graphene, i.e., nitrogen-doped graphene, was further extended using ethanol and nitrogen gas as precursors. The in situ assembly of N-graphene is a single-step method, based on the introduction of N-containing precursor together with carbon precursor in the reactive microwave plasma environment at atmospheric pressure conditions. A previously developed theoretical model was updated to account for the new reactor geometry and the nitrogen precursor employed. The theoretical predictions of the model are in good agreement with all experimental data and assist in deeper understanding of the complicated physical and chemical process in microwave plasma. Optical Emission Spectroscopy was used to detect the emission of plasma-generated ‘‘building units’’ and to determine the gas temperature. The outlet gas was analyzed by Fourier-Transform Infrared Spectroscopy to detect the generated gaseous by-products. The synthesized N-graphene was characterized by Scanning Electron Microscopy, Raman, and X-ray photoelectron spectroscopies.

Ultrasonic synthesis of CuO nanoflakes: A robust electrochemical scaffold for the sensitive detection of phenolic hazard in water and pharmaceutical samples

Hydroquinone (HQ), a phenolic compound is expansively used in many industrial applications and due to the utilization of HQ, water pollution tragedies frequently found by the improper handling and accidental outflows. When HQ is adsorbed directly through the skin that create toxic effects to human by affecting kidney, liver, lungs, and urinary tract and hence, a highly selective and sensitive technique is required for its quantification. Herein, we have developed the ultrasonic synthesis of copper oxide nanoflakes (CuO-NFs) using ultrasonic bath (20 kHz, 100 W) and successfully employed for the sensitive detection of the environmental hazardous pollutant HQ. The formed CuO-NFs were confirmed by X-ray diffraction, field emission scanning electron microscopy (FE-SEM), FT-IR spectroscopy and UV-visible spectroscopy and fabricated with the screen-printed carbon electrode (SPCE). The SEM images exhibited the uniform CuO-NFs with an average width of 85 nm. The linker-free CuO-NFs fabricated electrode showed the appropriate wide range of concentrations from 0.1 to 1400 µM and the limit of detection was found to be 10.4 nM towards HQ. The fabricated sensor having long term stability and sensitivity was successfully applied for the environmental and commercial real sample analysis and exhibited good recovery percentage, implying that the SPCE/CuO-NFs is an economically viable and benign robust scaffold for the determination of HQ.

3D-Flower-Like Copper Sulfide Nanoflake-Decorated Carbon Nanofragments-Modified Glassy Carbon Electrodes for Simultaneous Electrocatalytic Sensing of Co-existing Hydroquinone and Catechol

A copper sulfide nanoflakes-decorated carbon nanofragments-modified glassy carbon electrode (CuS-CNF/GCE) was fabricated for the electrocatalytic differentiation and determination of hydroquinone (HQ) and catechol (CC). The physicochemical properties of the CuS-CNF were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy. The electrocatalytic determination of HQ and CC over the CuS-CNF/GCE was evaluated by cyclic voltammetry and differential pulse voltammetry. An excellent detection limit and sensitivity of the CuS-CNF/GCE are obtained (0.293 µM and 0.259 µM) with a sensitivity of 184 nA µM⁻¹ cm⁻² and 208 nA µM⁻¹ cm⁻² (S/N=3) for HQ and CC, respectively. In addition, the CuS-CNF/GCE shows a selective identification of HQ and CC over potential interfering metal ions (Zn²⁺, Na⁺, K⁺, NO³⁻, SO₄²⁻, Cl⁻) and organic compounds (ascorbic acid, glucose), and a satisfactory recovery is also obtained in the spiked water samples. These results suggest that the CuS-CNF/GCE can be used as an efficient electrochemical sensor for the simultaneous determination of co-existing environmental pollutants such as HQ and CC in water environments with high selectivity and acceptable reproducibility.

Sensitive detection of hydroquinone using exfoliated graphene-Au/glassy carbon modified electrode

Graphene nanosheets (EGr) were electrochemically prepared through one-step exfoliation of a graphite rod in a mixture of H₂SO₄:HNO₃ (3:1) at low bias (4 V). Subsequently, gold nanoparticles were attached to the graphene surface (EGr-Au) by the reduction of the metal precursor (HAuCl₄) in aqueous solution containing dispersed graphene sheets. According to the XRD investigation, the synthesized material consists of a mixture of few-layer (86%) and multi-layer (14%) graphene. The interlayer distance was found to be in the range of 0.466-0.342 nm, which is larger than the interlayer distance in graphite (0.335 nm). The average size of gold nanoparticles in the EGr-Au sample was 24 nm, in excellent agreement with the TEM results. The synthesized material was then employed to modify a glassy carbon (GC) substrate, in order to obtain a modified electrode (GC/EGr-Au). Next, the electrochemical behavior of hydroquinone (HQ) in the presence and absence of interfering species, catechol (CAT) and bisphenol A (BPA) was studied and the corresponding calibration curves were plotted. Thus, in solutions without interfering species, the GC/EGr-Au electrode has a wide linear range (3 × 10^-7-10^-4 M), high sensitivity (0.089 A M^-1) and low detection limit (LOD = 10^-7 M; S/N = 3). The presence of either catechol or bisphenol A leads to the increase of LOD to 2 × 10^-7 M, and in addition changes the electrode sensitivity, up to 0.146 A M^-1.

Synthesis and application of bismuth ferrite nanosheets supported functionalized carbon nanofiber for enhanced electrochemical detection of toxic organic compound in water samples

Recently, the multiferroic material has fabulous attention in numerous applications owing to its excellent electronic conductivity, unique mechanical property, and higher electrocatalytic activity, etc. In this paper, we reported that the synthesis of bismuth ferrite (BiFeO₃) nanosheets integrated functionalized carbon nanofiber (BiFeO₃ NS/F-CNF) nanocomposite using a simple hydrothermal technique. Herein, the structural changes and crystalline property of prepared BiFeO₃ NS/F-CNF nanocomposite were characterized using Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). From this detailed structural evolution, the formation of nanosheets like BiFeO₃ and its nanocomposite with F-CNF were scrutinized and reported. Furthermore, the as-prepared BiFeO₃ NS/F-CNF nanocomposite modified glassy carbon electrode (GCE) was applied for electrochemical detection of catechol (CC). As expected, BiFeO₃ NS/F-CNF/GCE shows excellent electrocatalytic activity as well as 3.44 (F-CNF/GCE) and 7.92 (BiFeO₃ NS/GCE) fold higher electrochemical redox response for CC sensing. Moreover, the proposed sensor displays a wide linear range from 0.003 to 78.02 µM with a very low detection limit of 0.0015 µM. In addition, we have validated the real-time application of our developed CC sensor in different water samples.