Gold nanoparticles modified porous silicon chip for SALDI-MS determination of glutathione in cells

Direct detection of dithiocarbamate fungicides by SALDI/MS using porous TiC ceramic powder as a substrate

Dithiocarbamate fungicides (DTCs) have been widely used all over the world. Some of them show toxicities, such as growth toxicity and teratogenicity. Therefore, the analysis of DTCs in environments or crops is very significant. However, their direct and individual analysis was difficult, because most of them are metal complex compounds and have macromolecular properties and a low solubility in water or organic solvents. In the conventional analytical methods for DTCs, the total amount of DTCs was obtained by the quantification of the derivatives of the ligand or by measuring the carbon disulfide formed by the decomposition of the fungicides. Surface assisted laser desorption (SALDI)/MS can detect various compounds, such as metal complexes and macromolecules, present in a nanostructured substrate. The porous titanium carbide (TiC) ceramic powder shows adsorptive properties to various substances and can be used as a substrate for SALDI/MS. In this study, a method for the individual and direct detection of dithiocarbamate pesticides by SALDI/MS using porous TiC ceramics as a substrate has been developed. The dithiocarbamate fungicide was mixed with the porous TiC powder in a mortar, and the mixture was analyzed by SALDI/MS. The deprotonated ion of the ethylene-bis-dithiocarbamate complex, mancozeb or zineb, was detected in the negative ion mode. For the dimethyldithiocarbamate complexes, ferbam and ziram, the ion of the eliminated dithiocarbamate ligand was detected in the positive ion mode. Calibration curves by the present method for Manzeb showed good linearity by using an internal standard material. Based on these results, we concluded that this method is useful for the analysis of DTCs.

Tumor microenvironment-mediated NIR-I-to-NIR-II transformation of Au self-assembly for theranostics

The misdiagnosis of tumors due to insufficient penetration depth or signal interference and damage to normal tissues due to indiscriminate treatment are the biggest challenges in using photothermal agents for clinical translation. To overcome these limitations, a strategy of switching from the near-infrared (NIR)-I region to the NIR-II region was developed based on tumor microenvironment (TME)-mediated gold (Au) self-assembly. Using zeolitic imidazolate framework-8 (ZIF-8) metal-organic framework-coated gold nanorods (AuNRs@ZIF-8) as a model photothermal agent, we demonstrated that only a NIR-I photoacoustic imaging signal was observed in normal tissue because ZIF-8 could prevent the aggregation of AuNRs. However, when ZIF-8 dissociated in the TME, the AuNRs aggregated to activate NIR-II photoacoustic imaging and attenuate the NIR-I signal, thereby allowing an accurate diagnosis of tumors based on signal transformation. Notably, TME-activated NIR-II photothermal therapy could also inhibit tumor growth. Therefore, this TME-activated NIR-I-to-NIR-II switching strategy could improve the accuracy of deep-tumor diagnoses and avoid the injury caused by undifferentiated treatment. STATEMENT OF SIGNIFICANCE: Photothermal agents used for photoacoustic imaging and photothermal therapy have garnered great attention for tumor theranostics. However, always "turned on" near-infrared (NIR)-I laser (700-1000 nm)-responsive photothermal agents face issues of penetration depth and damage to normal tissues. In contrast, tumor microenvironment-activated NIR-II "smart" photothermal agents exhibit deeper penetration depth and tumor selectivity. Therefore, a NIR-I-to-NIR-II switching strategy was developed based on tumor microenvironment-mediated Au self-assembly. This work provides a new strategy for developing tumor microenvironment-activated NIR-II smart photothermal agents.

Continuous synthesis of BaFe2O4 and BaFe12O19 nanoparticles in a droplet microreactor for efficient detection of antihistamine drugs in oral fluid using surface-assisted laser desorption/ionization mass spectrometry

Surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) has received considerable attention as a complementary approach to matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), offering substantial potential for analyzing molecules in the low-mass region. Herein, we propose a facile method, a microreactor for the synthesis of two types of barium ferrite (BaFe2O4 and BaFe12O19) nanoparticles (NPs) within moving droplets for detecting antihistamine (AH) drugs in oral fluid (OF). The synthesized BaFe2O4 and BaFe12O19 NPs exhibited small particle size, good ultraviolet absorption, and excellent performance in SALDI-MS, as determined by survival yield measurements. The limits-of-detection for AH drugs were in the range of 1 pg mL-1 to 100 ng mL-1, and spot-spot reproducibility of the SALDI substrates was satisfactory. Moreover, when analyzing cetirizine in OF, the obtained recoveries of cetirizine were 101% and 99% using BaFe2O4 and BaFe12O19 NP, respectively. Furthermore, the proposed method was validated by analyzing OF samples from a healthy volunteer who consumed a 5 mg levocetirizine tablet for seven days. SALDI-MS analysis confirmed the successful detection of endogenous components, the parent ion of cetirizine, and other exogenous substances. This study reports an advanced application of droplet microreactor technology for designing and synthesizing a wide range of novel and efficient SALDI-MS substrates for various applications.

Faster, better, and cheaper: harnessing microfluidics and mass spectrometry for biotechnology

High-throughput screening technologies are widely used for elucidating biological activities. These typically require trade-offs in assay specificity and sensitivity to achieve higher throughput. Microfluidic approaches enable rapid manipulation of small volumes and have found a wide range of applications in biotechnology providing improved control of reaction conditions, faster assays, and reduced reagent consumption. The integration of mass spectrometry with microfluidics has the potential to create high-throughput, sensitivity, and specificity assays. This review introduces the widely-used mass spectrometry ionization techniques that have been successfully integrated with microfluidics approaches such as continuous-flow system, microchip electrophoresis, droplet microfluidics, digital microfluidics, centrifugal microfluidics, and paper microfluidics. In addition, we discuss recent applications of microfluidics integrated with mass spectrometry in single-cell analysis, compound screening, and the study of microorganisms. Lastly, we provide future outlooks towards online coupling, improving the sensitivity and integration of multi-omics into a single platform.

Nanostructured Substrates as Matrices for Surface Assisted Laser Desorption/Ionization Mass Spectrometry: A Progress Report from Material Research to Biomedical Applications

Within the past two decades, the escalation of research output in nanotechnology fields has boosted the development of novel nanoparticles and nanostructured substrates for use as matrices in surface assisted laser desorption/ionization mass spectrometry (SALDI-MS). The application of nanomaterials as matrices, rather than organic matrices, offers remarkable characteristics that allow the analysis of small molecules with fewer matrix interfering peaks, and share higher detection sensitivity, specificity, and reproducibility. The technological advancement of SALDI-MS has in turn, propelled the application of the analytical technique in the field of biomedical analysis. In this review, the properties and fabrication methods of nanostructured substrates in SALDI-MS such as metallic-, carbon-, and silicon-based nanostructures, quantum dots, metal-organic frameworks, and covalent-organic frameworks are described. Additionally, the latest progress (most within 5 years) of biomedical applications in small molecule, large biomolecule, and MS imaging analysis including metabolite profiling, drug monitoring, bacteria identification, disease diagnosis, and therapeutic evaluation are demonstrated. Key parameters that govern nanomaterial's SALDI efficiency in biomolecule analysis are also discussed. Finally, perspectives of the future development are given to provide a better advancement and promote practical application in clinical MS.

Mass spectrometry based high-throughput bioanalysis of low molecular weight compounds: are we ready to support personalized medicine?

Liquid chromatography coupled to mass spectrometry (LC-MS) is the gold standard in bioanalysis for the development of quantitative assays to support drug development or therapeutic drug monitoring. High-throughput and low-cost gene sequencing have enabled a paradigm shift from one treatment fits all to personalized medicine (PM). However, gene monitoring provides only partial information about the health state. The full picture requires the combination of gene monitoring with the screening of exogenous compounds, metabolites, lipids, and proteins. This critical review discusses how mass spectrometry–based technologies and approaches including separation sciences, ambient ionization, and ion mobility are/could be used to support high-throughput bioanalysis of endogenous end exogenous low molecular weight compounds. It includes also various biological sample types (from blood to expired air), and various sample preparation techniques.

Osteoporosis risk assessment using multilayered gold-nanoparticle thin film via SALDI-MS measurement

A powerful technique to detect bone biomarkers has been developed for assessment of osteoporosis at the early stage. Two-dimensional multilayered gold-nanoparticle thin film (MTF-AuNPs) was demonstrated as a promising test platform for detection of bone biomarker, hydroxyproline (HYP), measured by surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). With strong surface plasmon resonance and excellent homogeneity, facilely prepared, highly ordered, and large-scale MTF-AuNPs revealed high sensitivity of HYP in the SALDI-MS measurement without additional matrixes, such as α-cyano-4-hydroxycinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB). Furthermore, the mass spectrum of HYP with MTF-AuNPs was significantly improved in signal intensity enhancement, background noise reduction, and signal-to-noise ratio amplification. The excellent reproducibility of HYP spectra with only 9.3% relative signal variation could be attributed to MTF-AuNPs' high absorbance at a wavelength of 337 nm, low heat capacity, superior thermal conductivity, and outstanding homogeneity. The calibration curve showed high linear correlation between mass spectrum intensity and HYP concentration in the range of 1 to 100 μM, covering the whole level in healthy people and osteoporosis patients. In particular, the serum sample was directly deposited onto the MTF-AuNP sample substrate without any pretreatment and its HYP concentration was then successfully determined. We believe that the combination of SALDI-MS and MTF-AuNP sample substrates would be a potential approach for bone biomarker detection in the osteoporosis risk assessment. Graphical abstract.

Quantitation of Glutathione by Quinoline-5, 8-Dione-Based Tag Strategy Using MALDI Mass Spectrometry

In the present work, we developed an UV-absorptive and highly reactive tag aromatic molecule, quinoline-5,8-dione (QLD), for robust quantitative analysis of GSH by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The QLD could react with GSH with high efficiency at room temperature, and the resultant QLD-GSH conjugate could be readily detected by MALDI MS without interferences. By using the QLD tag, the detection limit of GSH was lowered to 10 fmol μL^-1, which was four orders of magnitude higher than that detected without using the QLD tag. Furthermore, accurate quantitative measurements of GSH in solution were successfully demonstrated by using glutamic acid-cysteine-alanine (ECA) as an internal standard. By properly adjusting the ECA concentrations, the intensity ratio value of QLD-tagged GSH (QLD-GSH) to QLD-tagged ECA (QLD-ECA) displayed a good linearity with GSH concentrations in a broad range from 4 to 4000 μM. Finally, the GSH level in HeLa cell lysates was also successfully detected, and the results are consistent with that obtained by a colorimetric assay. In summary, the proposed QLD-based tag method should be a rapid, cost-/time-effective, and sensitive new method for quantitative determination of GSH by MALDI MS. Graphical Abstract.

Fluorinated Gold Nanoparticles for Nanostructure Imaging Mass Spectrometry

Nanostructure imaging mass spectrometry (NIMS) with fluorinated gold nanoparticles (f-AuNPs) is a nanoparticle assisted laser desorption/ionization approach that requires low laser energy and has demonstrated high sensitivity. Here we describe NIMS with f-AuNPs for the comprehensive analysis of metabolites in biological tissues. F-AuNPs assist in desorption/ionization by laser-induced release of the fluorocarbon chains with minimal background noise. Since the energy barrier required to release the fluorocarbons from the AuNPs is minimal, the energy of the laser is maintained in the low μJ/pulse range, thus limiting metabolite in-source fragmentation. Electron microscopy analysis of tissue samples after f-AuNP NIMS shows a distinct "raising" of the surface as compared to matrix assisted laser desorption ionization ablation, indicative of a gentle desorption mechanism aiding in the generation of intact molecular ions. Moreover, the use of perfluorohexane to distribute the f-AuNPs on the tissue creates a hydrophobic environment minimizing metabolite solubilization and spatial dislocation. The transfer of the energy from the incident laser to the analytes through the release of the fluorocarbon chains similarly enhances the desorption/ionization of metabolites of different chemical nature, resulting in heterogeneous metabolome coverage. We performed the approach in a comparative study of the colon of mice exposed to three different diets. F-AuNP NIMS allows the direct detection of carbohydrates, lipids, bile acids, sulfur metabolites, amino acids, nucleotide precursors as well as other small molecules of varied biological origins. Ultimately, the diversified molecular coverage obtained provides a broad picture of a tissue's metabolic organization.