Disposable photoelectrochemical sensing strip for highly sensitive determination of perfluorooctane sulfonyl fluoride on functionalized screen-printed carbon electrode

Per- and poly-fluoroalkyl substances (PFAS) sensing: A focus on representatively sampling soil vadose zones linked to nano-sensors

Per- and poly-fluoroalkyl substances (PFAS) are a group of organo-fluorine compounds that have been broadly used in consumer and industrial products spanning virtually all sectors. They can be found as surfactants, coatings and liners, polymer additives, fire retardants, adhesives, and many more. The chemical stability of the carbon fluorine bond and amphiphilic nature of PFAS result in their persistence and mobility in the environment via soil porewater, surface water and groundwater, with potential for adverse effects on the environment and human health. There is an emergent and increasing requirement for fast, low-cost, robust, and portable methods to detect PFAS, especially in the field. There may be thousands of PFAS compounds present in soil and water at extremely low concentration (0.01-250 ppb) that require measurement, and traditional technologies for continuous environmental sensing are challenged due to the complexity of soil chemistry. This paper presents a comprehensive review of potentially rapid PFAS measurement methods, focused on techniques for representative sampling of PFAS in porewater from contaminated soil, and approaches for pre-treatment of porewater samples to eliminate these interferences to be ready for PFAS-detecting sensors. The review discusses selectivity, a key factor underlying pre-treatment and sensing performance, and explores the interactions between PFAS and various sensors. PFAS chemical nano-sensors discussed are categorized in terms of the detection mechanism (electrochemical and optical). This review aims to provide guidance and outline the current challenges and implications for future routine PFAS sensing linked to soil porewater collection, to achieve more selective and effective PFAS sensors.

The Latest Sensor Detection Methods for per- and Polyfluoroalkyl Substances

Per- and polyfluoroalkyl substances (PFASs) have emerged as a prominent environmental pollutant in recent years, primarily due to their tendency to accumulate and magnify in both the environment and living organisms. The entry of PFASs into the environment can have detrimental effects on human health. Hence, it is crucial to actively monitor and detect the presence of PFASs. The current standard detection method of PFAS is the combination of chromatography and mass spectrometry. However, this requires expensive instruments, extra sample pretreatment steps, complicated operation and long analysis time. As a result, new methods that do not rely on chromatography and mass spectrometry have been developed and applied. These alternative methods mainly include optical and electrochemical sensor methods, which offer great potential in terms of real-time field detection, instrument miniaturization, shorter analysis time, and reduced detection cost. This review provides a summary of recent advancements in PFAS detection sensors. We categorize and explain the principles and mechanisms of these sensors, and compare their limits of detection and sensitivity. Finally, we discuss the future challenges and improvements needed for PFAS sensors, such as field application, commercialization, and other related issues.

The colorimetry and smartphone determination of perfluorooctane sulfonate based on cytidine 5'-monophosphate-capped gold nanoclusters with peroxidase-like activity

Besides being a luminescent material, cytidine 5'-monophosphate-capped gold nanoclusters (AuNCs@CMP) also show superior peroxidase-like activity which can promote TMB oxidation in the presence of H₂O₂, causing the solution to turn efficiently from pale to blue. However, the presence of perfluorooctane sulfonate (PFOS) in the above system inhibited TMB oxidation and bluing of the solution, consequently establishing a colorimetric platform of AuNCs/H₂O₂/TMB for PFOS determination. The results showed that it responded to PFOS over a wide range of 2.0-50 μM, with a limit of detection (LOD) as low as 150 nM. Furthermore, in-depth mechanism investigation revealed that, rather than the active site of the catalyst being occupied by PFOS, such a hypochromatic effect originated from depletion of the reactive oxygen species (ROS) by PFOS degradation, thereby also offering a unique strategy to scavenge the lethal toxicity of PFOS. In addition, the colorimetric response of AuNCs/H₂O₂/TMB to PFOS was extended to smartphone determination conveniently based on RGB values. Finally, the established platform was applied to PFOS determination both in soil extracts and in tap water with good recovery, which supplies a novel colorimetric platform for visual determination of PFOS in practice. The method has the advantages of being rapid, sensitive and highly selective, which highlight the design and construction of more systems for determination and elimination of lethal pollutants in environmental water.

Research Progress of Perfluoroalkyl Substances in Edible Oil-A Review

Perfluoroalkyl substances (PFASs) have been widely used in different types of consumer and industrial applications such as surfactants, household cleaning products, textiles, carpets, cosmetics, firefighting foams, and food packaging because of their good stability and special physicochemical properties of hydrophobicity, oleophobicity, high temperature resistance, etc. Meanwhile, PFASs are considered an emerging organic pollutant due to their persistence and potential toxicity to human health. PFASs occur in edible oil, an important component of the global diet, mainly in three ways: raw material contamination, process contamination, and migration from oil contact materials. Thus, the occurrence of PFAS in edible oils has drawn more and more attention in recent years. In this work, the pertinent literature of the last two decades from the Web of Science database was researched. This review systematically addressed the potential sources, the contamination levels, and the progress of the determination of PFASs in edible oil. It aims to provide a relatively whole profile of PFASs in edible oil, render assistance to minimise human exposure to PFASs, and standardise the detection methods of perfluoroalkyl substances in edible oil.

Sensor technologies for the detection and monitoring of endocrine-disrupting chemicals

Endocrine-disrupting chemicals (EDCs) are a class of man-made substances with potential to disrupt the standard function of the endocrine system. These EDCs include phthalates, perchlorates, phenols, some heavy metals, furans, dimethoate, aromatic hydrocarbons, some pesticides, and per- and polyfluoroalkyl substances (PFAS). EDCs are widespread in the environment given their frequent use in daily life. Their production, usage, and consumption have increased many-fold in recent years. Their ability to interact and mimic normal endocrine functions makes them a potential threat to human health, aquatics, and wild life. Detection of these toxins has predominantly been done by mass spectroscopy and/or chromatography-based methods and to a lesser extent by advanced sensing approaches such as electrochemical and/or colorimetric methods. Instrument-based analytical techniques are often not amenable for onsite detection due to the lab-based nature of these detecting systems. Alternatively, analytical approaches based on sensor/biosensor techniques are more attractive because they are rapid, portable, equally sensitive, and eco-friendly. Advanced sensing systems have been adopted to detect a range of EDCs in the environment and food production systems. This review will focus on advances and developments in portable sensing techniques for EDCs, encompassing electrochemical, colorimetric, optical, aptamer-based, and microbial sensing approaches. We have also delineated the advantages and limitations of some of these sensing techniques and discussed future developments in sensor technology for the environmental sensing of EDCs.

Determination of Perfluorooctane Sulfonyl Fluoride and Perfluorohexane Sulfonyl Fluoride in Soil by Chemical Derivatization and Liquid Chromatography-Tandem Mass Spectrometry

Perfluorooctane sulfonyl fluoride (PFOSF) and perfluorohexane sulfonyl fluoride (PFHxSF) were listed as persistent organic pollutants by the Stockholm Convention in 2009 and 2022, respectively. To date, their concentrations in environmental samples have not been reported due to the lack of sensitive methods. Herein, a novel chemical derivatization was developed for quantitative analysis of trace PFOSF and PFHxSF in soil by derivatizing them to the corresponding perfluoroalkane sulfinic acids. The method showed good linearity in the range from 25 to 500 ng L^-1 with correlation coefficients (R²) better than 0.99. The detection limit of PFOSF in soil was 0.066 ng g^-1 with recoveries in the range of 96-111%. Meanwhile, the detection limit of PFHxSF was 0.072 ng g^-1 with recoveries in the range of 72-89%. Simultaneously, perfluorooctane sulfonic acid (PFOS) and perfluorohexane sulfonic acid (PFHxS) were also detected accurately without being affected by the derivative reaction. By applying this method in an abandoned fluorochemical manufacturing facility, PFOSF and PFHxSF were successfully detected at concentrations ranging from 2.7 to 357 ng g^-1 and 0.23 to 26 ng g^-1 dry weight, respectively. It is very interesting that 2 years after factory relocation, there still exists high concentrations of PFOSF and PFHxSF, which is of concern.

Molecularly imprinted polymers for per- and polyfluoroalkyl substances enrichment and detection

Per- and polyfluoroalkyl substances (PFAS) are highly toxic pollutants of significant concern as they are being detected in water, air, fish and soil. They are extremely persistent and accumulate in plant and animal tissues. Traditional methods of detection and removal of these substances use specialised instrumentation and require a trained technical resource for operation. Molecularly imprinted polymers (MIPs), polymeric materials with predetermined selectivity for a target molecule, have recently begun to be exploited in technologies for the selective removal and monitoring of PFAS in environmental waters. This review offers a comprehensive overview of recent developments in MIPs, both as adsorbents for PFAS removal and sensors that selectively detect PFAS at environmentally-relevant concentrations. PFAS-MIP adsorbents are classified according to their method of preparation (e.g., bulk or precipitation polymerization, surface imprinting), while PFAS-MIP sensing materials are described and discussed according to the transduction methods used (e.g., electrochemical, optical). This review aims to comprehensively discuss the PFAS-MIP research field. The efficacy and challenges facing the different applications of these materials in environmental water applications are discussed, as well as a perspective on challenges for this field that need to be overcome before exploitation of the technology can be fully realised.

ZnO/C nanocomposite grafted molecularly imprinted polymers as photoelectrochemical sensing interface for ultrasensitive and selective detection of chloramphenicol

Nanomaterials-based photoelectrochemical (PEC) detection is becoming a rapidly-developing analytical technique in chemical and biological assays due to its unique advantages of easy miniaturization, high sensitivity, and rapid turnaround time. Herein, a molecularly imprinted polymer-assisted PEC sensor based on ZnO/C nanocomposite was successfully fabricated for the highly sensitive and selective determination of chloramphenicol (CAP). Benefiting from the hydrophilic functional groups (-OH, -COOH) and large surface area of bio-templated ZnO/C nanocomposite, the tight grafting of MIP with excellent recognition ability on substrate is easier and more stable than traditional PEC sensor, thus significantly increasing the performance. Under optimal conditions, the PEC sensor exhibited significant CAP detection performance in the range of 0.01-5000 ng mL^-1 with a detection LOD of 5.08 pg mL^-1 (S/N = 3) and successfully applied to the detection of CAP in milk sample. Our results show that ZnO/C nanocomposite and MIP can act as an efficient photo-responsible matrix to fabricate PEC sensor, providing important application potentials for pollutants control in food and environment.

Nano-enabled sensing of per-/poly-fluoroalkyl substances (PFAS) from aqueous systems - A review

Per-/poly-fluoroalkyl substances (PFAS) are an emerging class of environmental contaminants used as an additive across various commodity and fire-retardant products, for their unique thermo-chemical stability, and to alter their surface properties towards selective liquid repellence. These properties also make PFAS highly persistent and mobile across various environmental compartments, leading to bioaccumulation, and causing acute ecotoxicity at all trophic levels particularly to human populations, thus increasing the need for monitoring at their repositories or usage sites. In this review, current nano-enabled methods towards PFAS sensing and its monitoring in wastewater are critically discussed and benchmarked against conventional detection methods. The discussion correlates the materials' properties to the sensitivity, responsiveness, and reproducibility of the sensing performance for nano-enabled sensors in currently explored electrochemical, spectrophotometric, colorimetric, optical, fluorometric, and biochemical with limits of detection of 1.02 × 10^-6 μg/L, 2.8 μg/L, 1 μg/L, 0.13 μg/L, 6.0 × 10^-5 μg/L, and 4.141 × 10^-7 μg/L respectively. The cost-effectiveness of sensing platforms plays an important role in the on-site analysis success and upscalability of nano-enabled sensors. Environmental monitoring of PFAS is a step closer to PFAS remediation. Electrochemical and biosensing methods have proven to be the most reliable tools for future PFAS sensing endeavors with very promising detection limits in an aqueous matrix, short detection times, and ease of fabrication.

Selectivity of Per- and Polyfluoroalkyl Substance Sensors and Sorbents in Water

Per- and polyfluoroalkyl substances (PFAS) are a large group of engineered chemicals that have been widely used in industrial production. PFAS have drawn increasing attention due to their frequent occurrence in the aquatic environment and their toxicity to animals and humans. Developing effective and efficient detection and remediation methods for PFAS in aquatic systems is critical to mitigate ongoing exposure and promote water reuse. Adsorption-based removal is the most common method for PFAS remediation since it avoids hazardous byproducts; in situ sensing technology is a promising approach for PFAS monitoring due to its fast response, easy operation, and portability. This review summarizes current materials and devices that have been demonstrated for PFAS adsorption and sensing. Selectivity, the key factor underlying both sensor and sorbent performance, is discussed by exploring the interactions between PFAS and various probes. Examples of selective probes will be presented and classified by fluorinated groups, cationic groups, and cavitary groups, and their synergistic effects will also be analyzed. This review aims to provide guidance and implication for future material design toward more selective and effective PFAS sensors and sorbents.

Molecularly Imprinted Polymers (MIPs) in Sensors for Environmental and Biomedical Applications: A Review

Molecular imprinted polymers are custom made materials with specific recognition sites for a target molecule. Their specificity and the variety of materials and physical shapes in which they can be fabricated make them ideal components for sensing platforms. Despite their excellent properties, MIP-based sensors have rarely left the academic laboratory environment. This work presents a comprehensive review of recent reports in the environmental and biomedical fields, with a focus on electrochemical and optical signaling mechanisms. The discussion aims to identify knowledge gaps that hinder the translation of MIP-based technology from research laboratories to commercialization.

Native mass spectrometry for the design and selection of protein bioreceptors for perfluorinated compounds

Biosensing platforms are answering the increasing demand for analytical tools for environmental monitoring of small molecules, such as per- and polyfluoroalkyl substances (PFAS). By transferring toxicological findings in bioreceptor design we can develop innovative pathways for biosensor design. Indeed, toxicological studies provide fundamental information about PFAS-biomolecule complexes that can help evaluate the applicability of the latter as bioreceptors. The toolbox of native mass spectrometry (MS) can support this evaluation, as shown by the two case studies reported in this work. The analysis of model proteins' (i.e. albumin, haemoglobin, cytochrome c and neuroglobin) interactions with well-known PFAS, such as perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), demonstrated the potential of this native MS screening approach. In the first case study, untreated albumin and delipidated albumin were compared in the presence and absence of PFOA confirming that the delipidation step increases albumin affinity for PFOA without affecting protein stability. In the second case study, the applicability of our methodology to identify potential bioreceptors for PFOS/PFOA was extended to other proteins. Structurally related haemoglobin and neuroglobin revealed a 1 : 1 complex, whereas no binding was observed for cytochrome c. These studies have value as a proof-of-concept for a general application of native MS to identify bioreceptors for toxic compounds.

On the swelling behavior of poly(N-Isopropylacrylamide) hydrogels exposed to perfluoroalkyl acids

Per- and polyfluoroalkyl substances (PFAS) have rapidly accumulated in the environment due to their widespread use prior to commercial discussion in the early 21st century, and their slow degradation has magnified concerns of their potential toxicity. Monitoring their distribution is, therefore, necessary to evaluate and control their impact on the health of exposed populations. This investigation evaluates the capability of a simple polymeric detection scheme for PFAS based on crosslinked, thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) hydrogels. Surveying swelling perturbations induced by several hydrotropes and comparable hydrocarbon analogs, tetraethylammonium perfluorooctane sulfonate (TPFOS) showed a significantly higher swelling ratio on a mass basis (65.5 ± 8.8 at 15°C) than any of the other analytes tested. Combining swelling with the fluorimetric response of a solvachromatic dye, nile red, revealed the fluorosurfactant to initiate observable aggregation (i.e., its critical aggregation concentration) at 0.05 mM and reach saturation (i.e., its charge neutralization concentration) at 0.5 mM. The fluorosurfactant was found to homogeneously distribute throughout the polymer matrix with energy dispersive X-ray spectroscopy, marking the swelling response as a peculiar nexus of fluorinated interfacial positioning and delocalized electrostatic repulsion. Results from the current study hold promise for exploiting the physiochemical response of PNIPAM to assess TPFOS's concentration.

Comparative evaluation of 15-minute rapid diagnosis of ischemic heart disease by high-sensitivity quantification of cardiac biomarkers

A rapid clinical diagnosis may efficiently improve the survival rate and prognosis of patients with ischemic heart disease (IHD). Therefore, a one-step, rapid and inexpensive analysis for the quick diagnosis of IHD was investigated in the present study. Consecutive patients who were subjected to myoglobin, cardiac troponin I and creatine kinase-MB isoenzyme assessment at the Emergency Department of Shenzhen Second People's Hospital (Shenzhen, China) between December 2017 and March 2018 prior to treatment were screened. Clinically applicable disposable strips were employed for quantification of the cardiac biomarkers. The analytical performance of the strips was evaluated by receiver operating characteristic (ROC) curves and compared with the traditional chemiluminescence immunoassay (CLIA) method. The data of 391 participants were collected. At the baseline, 57 patients were diagnosed with IHD and 334 patients were diagnosed with other diseases. The area under the ROC curve (AUC) of the CLIA model was 0.787 (95% CI, 0.709-0.865) with a specificity of 76.7% and a sensitivity of 71.9%. At the optimal cutoff value of -1.867, the negative and the positive predictive value were 94.1 and 34.5%, respectively. The AUC of the disposable strip model was 0.792 (95% CI, 0.729-0.855). At the cutoff value of -1.820 or below, the negative predictive value was 94.9%, the positive predictive value was 28.9%, the specificity was 66.8% and the sensitivity was 79.0%. The P-value of the ROCs was 0.858, indicating no statistically significant difference between the two assay methods. The cost of the disposable strip was 50% of that of the CLIA method and it took only 25% of the time that was required for the quantification of the three cardiac markers by CLIA. In conclusion, the disposable strip provides a platform for point-of-care testing and may be an easy, rapid, reliable and cost-saving method for the diagnosis of IHD.

Facile fabrication of visible light photoelectrochemical immunosensor for SCCA detection based on BiOBr/Bi2S3 heterostructures via self-sacrificial synthesis method

A novel visible light photoelectrochemical immunosensor based on BiOBr/Bi₂S₃ heterostructures was fabricated to detect squamous cell carcinoma antigen (SCCA). Bi₂S₃ nanoparticles formed on the BiOBr microflowers by the self-sacrificial synthesis method based on the facile reaction between BiOBr and S^2- ions. The BiOBr/Bi₂S₃ composites exhibited excellent visible light photoelectrochemical activity, when ascorbic acid (AA) was employed as a perfect electron donor. The photocurrent intensity of BiOBr/Bi₂S₃ modified ITO electrode arrived at around 20 µA, which was approximately 30 times than that of pure BiOBr. Dopamine formed easily polydopamine film via self-polymerization on the surface of BiOBr/Bi₂S₃ composites to immobilize SCCA antibody. Under the optimal condition, this photoelectrochemical immunosensor realized the ultrasensitive determination of SCCA. With the logarithm of SCCA concentration in the range of 0.001-75 ng mL^-1, the specific binding between SCCA and antibody led to the linearly decrease of photocurrent signal with a low detection limit of 0.3 pg mL^-1 (S/N = 3). This facilely constructed photoelectrochemical immunosensor maybe have promising practical application in photocatalysis, analytical detection and biosensor, etc.

A novel sandwich-type photoelectrochemical sensor for SCCA detection based on Ag2S-sensitized BiOI matrix and AucorePdshell nanoflower label for signal amplification

Signal amplification was fulfilled for the interaction between BiOI/Ag₂S and Au_cPd_s.