An ultrasensitive and switch-on platform for aflatoxin B1 detection in peanut based on the fluorescence quenching of graphene oxide-gold nanocomposites

A multimode biosensor based on prussian blue nanoparticles loaded with gold nanoclusters for the detection of aflatoxin B1

Herein, a novel fluorescent/colorimetric/photothermal biosensor is proposed for aflatoxin B1 (AFB1) detection in food based on Prussian blue nanoparticles (PBNPs) (∼50 nm), gold nanoclusters (AuNCs), and an aptamer (Apt) within three hours. Briefly, a multifunctional compound, namely PBNPs-PEI@AuNCs, was synthesized from PBNPs as the loading carrier, polyethyleneimine (PEI) as the cross-linking agent, and AuNCs directly combined on the surface of PBNPs. The AFB1 Apt was then modified on the PBNPs-PEI@AuNCs to form a PBNPs-PEI@AuNCs-Apt probe, whereby when AFB1 is present, AFB1 is specifically captured by the probe. Meanwhile, the MNPs@antibody was also introduced to capture AFB1, thereby forming a "sandwich" structure compound. After magnetic separation, high temperature was applied to this "sandwich" structure compound to induce the denaturation of the Apt. Then the fluorescent/colorimetric/photothermal signals were collected from the PBNPs-PEI@AuNCs@Apt to give information on its related condition. The detection limits of the biosensor were 0.64 × 10-14, 0.96 × 10-14, and 0.55 × 10-12 g mL-1 for the three signals, which were outputted independently and could be verified with each other to ensure the accuracy of the results. Moreover, the colorimetric and photothermal strategies with this probe do not require large-scale instruments, providing a promising choice for achieving the rapid field detection of AFB1.

Strategy of functional nucleic acids-mediated isothermal amplification for detection of foodborne microbial contaminants: A review

Foodborne microbial contamination (FMC) is the leading cause of food poisoning and foodborne illness. The foodborne microbial detection methods based on isothermal amplification have high sensitivity and short detection time, and functional nucleic acids (FNAs) could extend the detectable object of isothermal amplification to mycotoxins. Therefore, the strategy of FNAs-mediated isothermal amplification has been emergingly applied in biosensors for foodborne microbial contaminants detection, making biosensors more sensitive with lower cost and less dependent on nanomaterials for signal output. Here, the mechanism of six isothermal amplification technologies and their application in detecting FMC is firstly introduced. Then the strategy of FNAs-mediated isothermal amplification is systematically discussed from perspectives of FNAs' versatility including recognition elements (Aptamer, DNAzyme), programming tools (DNA tweezer, DNA walker and CRISPR-Cas) and signal units (G-quadruplex, FNAs-based nanomaterials). Finally, challenges and prospects are presented in terms of addressing the issue of nonspecific amplification reaction, developing better FNAs-based sensing elements and eliminating food matrix effects.

Innovations in the synthesis of graphene nanostructures for bio and gas sensors

Sensors play a significant role in modern technologies and devices used in industries, hospitals, healthcare, nanotechnology, astronomy, and meteorology. Sensors based upon nanostructured materials have gained special attention due to their high sensitivity, precision accuracy, and feasibility. This review discusses the fabrication of graphene-based biosensors and gas sensors, which have highly efficient performance. Significant developments in the synthesis routes to fabricate graphene-based materials with improved structural and surface properties have boosted their utilization in sensing applications. The higher surface area, better conductivity, tunable structure, and atom-thick morphology of these hybrid materials have made them highly desirable for the fabrication of flexible and stable sensors. Many publications have reported various modification approaches to improve the selectivity of these materials. In the current work, a compact and informative review focusing on the most recent developments in graphene-based biosensors and gas sensors has been designed and delivered. The research community has provided a complete critical analysis of the most robust case studies from the latest fabrication routes to the most complex challenges. Some significant ideas and solutions have been proposed to overcome the limitations regarding the field of biosensors and hazardous gas sensors.

Nanoarchitectonics of graphene based sensors for food safety monitoring

Since the desire for the real-time food quality monitoring, plenty of research effort has been made to develop novel tools and to offer extremely efficient detection of food contaminants. Unique electrical, mechanical, and thermal properties make graphene an important material in the field of sensor research. The material can be manufactured into flakes, sheets, films and with its oxidized derivatives could be almost used for a limitless set of application. Herein, current graphene-based sensors for food quality monitoring, novel designs, sensing mechanisms and elements of sensor systems and potential challenges will be outlined and discussed.

Applications of hybridization chain reaction optical detection incorporating nanomaterials: A review

The development of powerful, simple and cost-effective signal amplifiers has significant implications for biological research and analysis. Hybridization chain reaction (HCR) has attracted increasing attention because of its enzyme-free, simple, and efficient amplification. In the HCR process, an initiator probe triggered a pair of metastable hairpins through a cross-opening process to propagate a chain reaction of hybridization events, yielding a long-nicked double-stranded nucleic acid structure. To achieve more noticeable signal amplification, nanomaterials, including graphene oxide, quantum dots, gold, silver, magnetic, and other nanoparticles, were integrated with HCR. Various types of colorimetric, fluorescence, plasmonic analyses or chemiluminescence optical sensing strategies incorporating nanomaterials have been developed to analyze various targets, such as nucleic acids, small biomolecules, proteins, and metal ions. This review summarized the recent advances of HCR technology pairing diverse nanomaterials in optical detection and discussed their challenges.

Development of an electrochemical aptasensor based on Au nanoparticles decorated on metal-organic framework nanosheets and p-biphenol electroactive label for the measurement of aflatoxin B1 in a rice flour sample

This study purposes designing a new aptasensor to detect aflatoxin B1 (AFB1). The AFB1 aptasensor was developed by growing gold nanoparticles on the surface of nickel-based metal-organic framework nanosheets (AuNPs/Ni-MOF) and an electroactive indicator (p-biphenol, PBP). The AFB1 aptamer was immobilized on the AuNPs/Ni-MOF and then hybridized with the complementary DNA (cDNA). PBP was intercalated within the double helix of the cDNA-aptamer. The difference between electrochemical responses of intercalated PBP before and after incubation of AFB1 with the immobilized aptamer was considered as an analytical response. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to monitor the construction processes of the aptasensor. By recording the differential pulse voltammograms of PBP in phosphate buffer (pH 7.0, 0.1 M), the linear range and the detection limit of AFB1 were found to be 5.0 × 10^-3-150.0 ng mL^-1 and 1.0 × 10^-3 ng mL^-1 (S/N = 3), respectively. Finally, the designed aptasensor has been successfully used to measure AFB1 in a rice flour sample with satisfying results. Schematic illustrated the different steps of constructing the electrochemical aptasensor based on Au nanoparticles decorated on Ni-metal-organic framework nanosheets and p-biphenol electroactive label for measuring aflatoxin B1 (AFB1).

Signal enhancing strategies in aptasensors for the detection of small molecular contaminants by nanomaterials and nucleic acid amplification

Small molecular contaminants (such as mycotoxins, antibiotics, pesticide residues, etc.) in food and environment have given rise to many biological and ecological toxicities, which has attracted worldwide attention in recent years. Meanwhile, due to the advantages of aptamers such as high specificity and stability, easy synthesis and modification, as well as low cost and immunogenicity, various aptasensors for the detection of small molecular contaminants have been flourishing. An aptasensor as a whole is composed of an aptamer-based target recognizer and a signal transducer, which are fields of concentrated research. In the practical detection applications, in order to achieve the quantitative detection of small molecular contaminants at low abundance in real samples, a large number of signal enhancing strategies have been utilized in the development of aptasensors. Recent years is a vintage period for efficient signal enhancing strategies of aptasensors by the aid of nanomaterials and nucleic acid amplification that are applied in the elements for target recognition and signal conversion. Therefore, this paper meticulously reviews the signal enhancing strategies based on nanomaterials (including the (quasi-)zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanomaterials) and nucleic acid amplification (including enzyme-assisted nucleic acid amplification and enzyme-free nucleic acid amplification). Furthermore, the challenges and future trends of the abovementioned signal enhancing strategies for application are also discussed in order to inspire the practitioners in the research and development of aptasensors for small molecular contaminants.

Refolding of denatured gold nanoparticles-conjugated bovine serum albumin through formation of catanions between gemini surfactant and sodium dodecyl sulphate

The present work elucidates binding interactions of sodium dodecyl sulphate (SDS) with the conjugated gold nanoparticles (AuNPs)-bovine serum albumin (BSA), unfolded by each of two gemini surfactants, 1,4-bis(dodecyl-N,N-dimethylammonium bromide)-butane (12-4-12,2Br⁻) or 1,8-bis(dodecyl-N,N-dimethylammonium bromide)-octane (12-8-12,2Br⁻). Initially, at a low concentration of SDS there is a relaxation of bioconjugates from their compressed form due to the formation of catanions between SDS and gemini surfactants. On moving towards higher concentrations of SDS, these relaxed unfolded bioconjugates renature by removal of residual bound gemini surfactants. Mixed assemblies of SDS and gemini surfactants formed during refolding of bioconjugates are characterized by DLS and FESEM measurements. A step-by-step process of refolding observed for these denatured protein bioconjugates is exactly the inverse of their unfolding phenomenon. Parameters concerning nanometal surface energy transfer (NSET) and Förster's resonance energy transfer (FRET) phenomenon were employed to develop a binding isotherm. Moreover, there remains an inverse relationship between α-helix and β-turns of bioconjugates during the refolding process. Significantly, in the presence of 12-8-12,2Br⁻, SDS induces more refolding as compared to that for 12-4-12,2Br⁻. Bioconjugation shows an effect on the secondary structures of refolded BSA, which has been explored in detail through various studies such as Fourier transform infrared spectroscopy, fluorescence, and circular dichroism (CD). Therefore, this approach vividly describes the refolding of denatured bioconjugates, exploring structural information regarding various catanions formed during the process that would help in understanding distance-dependent optical biomolecular detection methodologies and physicochemical properties.

Demonstration of refolding of conjugated AuNPs-BSA through the formation of various catanions of SDS and gemini surfactants with different spacers in HEPES buffer medium using FRET/NSET methods and material characterization techniques.

A Novel Colorimetric Nano Aptasensor for Ultrasensitive Detection of Aflatoxin B1 Based on the Exonuclease III-Assisted Signal Amplification Approach

The detection of aflatoxin B1 (AFB1) has recently garnered much attention on the issue of food safety. In this study, a novel and sensitive aptasensor towards AFB1 is proposed using an Exonuclease III (Exo III)-integrated signal amplification strategy. This reported sensing strategy is regulated by aptamer-functionalized nanobeads that can target AFB1; furthermore, complementary DNA (cDNA) strands can lock the immobilized aptamer strands, preventing the signal amplification function of Exo III in the absence of AFB1. The presence of AFB1 triggers the displacement of cDNA, which will then activate the Exo III-integrated signal amplification procedure, resulting in the generation of a guanine (G)-rich sequence to form a G-4/hemin DNAzyme, which can catalyze the substrate of ABTS to produce a green color. Using this method, a practical detection limit of 0.0032 ng/mL and a dynamic range of detection from 0.0032 to 50 ng/mL were obtained. Additionally, the practical application of the established sensing method for AFB1 in complex matrices was demonstrated through recovery experiments. The recovery rate and relative standard deviations (RSD) in three kinds of cereal samples ranged from 93.83% to 111.58%, and 0.82% to 7.20%, respectively, which were comparable with or better than previously reported methods.

Self-replicating catalyzed hairpin assembly for rapid aflatoxin B1 detection

Herein, a rapid signal amplified aflatoxin B1 (AFB1) detection system based on self-replicating catalyzed hairpin assembly (SRCHA) has been constructed. In this SRCHA system, trigger DNA was initially blocked and two split trigger DNA sequences were integrated into two hairpin auxiliary probes, H1 and H2, respectively. In the presence of AFB1, the aptamer sequence was recognized by AFB1 and trigger DNA was released, which can initiate a CHA reaction and lead to the formation of a helix DNA H1-H2 complex. Then this complex can dissociate double-stranded probe DNA (F-Q) and the fluorescence signal was recovered. Meanwhile, the two split trigger DNA sequences came into close-enough proximity and a trigger DNA replica was formed. Then the obtained replicas can trigger an additional CHA reaction, leading to the rapid and significant enhancement of the fluorescence signal, and AFB1 can be detected within 15 min with a detection limit of 0.13 ng mL-1. This AFB1 detection system exhibits potential application in the on-site rapid detection of AFB1.

Rapid and Quantitative Detection of Aflatoxin B1 in Grain by Portable Raman Spectrometer

Many foodstuffs are extremely susceptible to contamination with aflatoxins, in which aflatoxin B₁ is highly toxic and carcinogenic. Therefore, it is crucial to develop a rapid and effective analytical method for detecting and monitoring aflatoxin B₁ in food. Herein, a surface-enhanced Raman spectroscopic (SERS) method combined with QuEChERS (quick, easy, cheap-effective, rugged, safe) sample pretreatment technique was used to detect aflatoxin B₁. Sample preparation was optimized into a one-step extraction method using an Au nanoparticle-based solution (Au sol) as the SERS detection substrate. An affordable portable Raman spectrometer was then used for rapid, label-free, quantitative detection of aflatoxin B₁ levels in foodstuffs. This method showed a good linear log relationship between the Raman signal intensity of aflatoxin B₁ in the 1-1000 µg L^-1 concentration range with a limit of detection of 0.85 µg kg^-1 and a correlation coefficient of 0.9836. Rapid aflatoxin B₁ detection times of ∼10 min for wheat, corn, and protein feed powder samples were also achieved. This method has high sensitivity, strong specificity, excellent stability, is simple to use, economical, and is suitable for on-site detection, with good prospects for practical application in the field of food safety.

A metal-organic framework/aptamer system as a fluorescent biosensor for determination of aflatoxin B1 in food samples

The demand of simple, sensitive, selective and reliable assay for aflatoxin B1 (AFB1) detection is ubiquitous in food safety, due to its high toxic. Herein, a novel fluorescent aptasensor using metal-organic frameworks (UiO-66-NH₂) and TAMRA label aptamer as sensing platform for AFB1 detection was developed. The TAMRA aptamer adsorbed on the surface of UiO-66-NH₂ via van der Waals force and its fluorescence was quenched for the charge transfer from fluorescence dye TAMRA to metal ions of UiO-66-NH₂. After introducing AFB1 to the system, the TAMRA aptamer binded to AFB1 and formed TAMRA aptamer/AFB1complex, making its conformation change and resulting in fluorescence recovery. Thus, the quantity of AFB1 could be analyzed according to the fluorescence signal change. Under optimize experimental conditions, the assay exhibited high sensitivity toward AFB1 in range of 0-180 ng mL^-1 with low limit of detection of 0.35 ng mL^-1 and good specificity against other toxins. Moreover, the aptamer/metal-organic frameworks sensing platform could be utilized to determine AFB1 content in food samples such as corn, rice and milk. It provided a reasonable method for other mycotoxin detection by changing the sequence of aptamer.

Usage of Graphene Oxide in Fluorescence Quenching-Linked Immunosorbent Assay for the Detection of Cry2Ab Protein Present in Transgenic Plants

Graphene oxide-based sensor technologies in various detection platforms have been adopted in multiple dimensions. Most of the applications in combination with other materials such as gold, silver, enzymes, and so forth are read as electrical, electrochemical, impedance, and fluorescence signals. We report the development of a novel and simple fluorescence quenching-based immunoassay platform that provides quantitative binding sites for the Cry2Ab protein content present in the transgenic cotton (Gossypium hirsutum) plant. In this assay, the graphene oxide-conjugated anti-Cry2Ab antibody serves as the binding site for the analyte Cry2Ab protein, which forms a complex with a second anti-Cry2Ab fluorescein isothiocyanate (FITC)-conjugated antibody. This complex acts as the reaction center of this platform where the graphene oxide quenches the fluorescence signal of the FITC molecule. This microtiter plate-based method currently works at a sensitivity of 0.78 ng /ml, which can further be improved.

One-step and ultrasensitive ATP detection by using positively charged nano-gold@graphene oxide as a versatile nanocomposite

A versatile nanocomposite was simply prepared based upon the electrostatic adsorption of positively charged gold nanoparticles with negatively charged graphene oxide (nano-gold@GO), and utilized as a novel fluorescence quenching platform for ultrasensitive detection of adenosine triphosphate (ATP). In the designed system, DNA-stabilized Ag nanoclusters (DNA/AgNCs) were used as fluorescent probes, DNA duplex was formed in the presence of ATP, and they can electrostatically adsorb onto the surface of nano-gold@GO to quench the fluorescence signal. Upon the addition of exonuclease III (Exo III), the DNA duplex would be hydrolyzed into DNA fragments and resulted in the recovery of the fluorescence signals due to the diffusion of AgNCs away from nano-gold@GO. Based on these, sensitive detection of ATP was realized with a detection range of 5.0 pM-20 nM. Notably, a good recovery in the range of 94-104% was obtained when detecting ATP in human serum samples, indicating a promising application value in early disease diagnosis. Graphical abstract A functional positively charged nano-gold@graphene oxide was fabricated and utilized as an enhanced fluorescence quenching platform for the detection of ATP, coupled with exonuclease III-assisted signal amplification.

A novel gold nanostars-based fluorescent aptasensor for aflatoxin B1 detection

In this work, a simple and sensitive fluorescent aptasensor for aflatoxin B1 (AFB₁) detection was proposed using gold nanostars (AuNSs) as a novel fluorescence quenching material. Carboxyfluorescein-labeled complementary DNA with hairpin structure (FAM-labeled HP) was designed to hybridize with AFB₁ aptamer to form double-stranded DNA, resulting in the opening of hairpin structure. When double-stranded DNA was modified on AuNSs surface, FAM was far from AuNSs and produced a strong fluorescence intensity. The introduction of AFB₁ in the system led to the specific interaction of AFB₁ and aptamer, and changed the conformation of aptamer, inducing the release of aptamer from double-stranded DNA and the restoration of hairpin structure. Fluorescence quenching occurred when FAM was close to AuNSs, and the fluorescence intensity decreased. In the presence of 5 ng/mL AFB₁, ΔF/F₀ of the AuNSs/FAM-labeled HP/Apt was ~44.2%, higher than that of the AuNPs/FAM-labeled HP/Apt, indicating the better quenching effect of AuNSs. The change of fluorescence intensity linearly increased by adding AFB₁ in the concentration range of 0.1 ng/mL-10 ng/mL, with the LOD of 21.3 pg/mL. The proposed aptasensor exhibited good selectivity in the presence of other toxins at 10-fold concentration of AFB₁, and showed satisfactory recovery in the range of 92%-112% toward AFB₁ detection in spiked corn flour sample.

Development of a chemiluminescent aptasensor for ultrasensitive and selective detection of aflatoxin B1 in peanut and milk

More and more attention about food safety leads to a research hotspot to develop new detection methods for food contaminant. To address the problems of serious interference and low sensitivity, a chemiluminescent aptasensor for the detection of aflatoxin B1(AFB1) in food was developed in this paper. It is based on horseradish peroxidase (HRP) catalyze the luminol chemiluminescence reaction. The hybridization chain reaction (HCR) signal amplification strategy has been used to improve the detection sensitivity. Magnetic separation could further reduce background signal obviously at the same time. AFB1 as a model of analyte to test the capability of our developed assay system. Under the optimal experimental conditions, CL intensity showed a good linear correlation with the concentrations of AFB1 ranging from 0.5 to 40 ng mL^-1. The limit of detection was estimated 0.2 ng mL^-1 based on 3 times of the signal-to-noise ratio which is lower than those of the previously reported sensors. It could be used to detect AFB1 content in real samples, such as peanuts and milk which were purchased in local supermarket. The results proved that the sensing system has good anti-interference and selectivity. In all, it has potential for practical application in food safety field.

A review on graphene-based nanocomposites for electrochemical and fluorescent biosensors

Biosensors with high sensitivity, selectivity and a low limit of detection, reaching nano/picomolar concentrations of biomolecules, are important to the medical sciences and healthcare industry for evaluating physiological and metabolic parameters.

A fast-responsive fluorescent probe for sensitive detection of graphene oxide based on MoS2 quantum dots

Facile preparation of water soluble and fluorescent N-doped MoS2 quantum dots (N-MoS2 QDs) is described herein. N was introduced to reduce defects in the MoS2 surface. The obtained N-MoS2 QDs exhibited excellent fluorescence characteristics with good photostability and excellent stability even in 3 M NaCl solution and when stored in a refrigerator for one year. Additionally, the fluorescent N-MoS2 QDs were developed as a simple and practical nanosensor for the detection of GO through hydrophobic π-π interactions between N-MoS2 QDs and GO, where the excited state electron and energy transfer may occur from N-MoS2 QDs to GO along with fluorescence quenching of N-MoS2 QDs. These results reveal that the limit of detection (LOD) was as low as 4 ng mL-1, which was able to satisfy the needs of the determination of GO in environmental water samples. Importantly, the N-MoS2 QDs nanosensor exhibits excellent detection selectivity against other ions or molecules in the environment. In this study, the proposed sensor was successfully used for the determination of GO content in environmental water samples.

Direct fluorescence anisotropy approach for aflatoxin B1 detection and affinity binding study by using single tetramethylrhodamine labeled aptamer

The discovery of aptamers for aflatoxin B1 (AFB1), one of toxic carcinogens, has allowed to develop aptamer-based sensors and assays for aflatoxin. In this work, we reported a direct fluorescence anisotropy (FA) assay for investigation of aptamer-AFB1 binding and detection of AFB1 with the aptamer having single tetramethylrhodamine (TMR) label on a specific site. From a series of labeling sites of a 50-mer aptamer, we screened out the aptamer with TMR labeling at the 26th T, capable of generating good and large FA-decreasing response to AFB1. By using the T26-labeled 50-mer aptamer probe in FA analysis, we determined the affinity and selectivity of aptamer, and identified the crucial region of aptamer and optimum experimental conditions for strong binding. The aptamer could be further truncated to as short as 26 nucleotides in length, and this shorter aptamer possessed a simple stem-loop secondary structure and retained good binding affinity. Nucleotides in the loop region of the aptamer were conserved and important for affinity recognition. We achieved FA detection of AFB1 with a detection limit about 2 nM by using the TMR-labeled aptamer probe. The cross reactivity of aflatoxin B1, aflatoxin B2, aflatoxin M1, aflatoxin M2, aflatoxin G1, and aflatoxin G2 with aptamer were estimated to be 100%, 61%, 23%, 21%, 6.3%, 6.5%, respectively. The aptamer probe presented good selectivity over other mycotoxins and showed potential in complex sample analysis. This study of affinity binding between aptamer and aflatoxins will be helpful for developing other aptamer-based assays and sensors for aflatoxins.