A multifunctional molecularly imprinted polymer-based biosensor for direct detection of doxycycline in food samples

Smartphone-assisted fluorescent sensor for the visualization and quantitative detection of doxycycline and L-arginine

A novel smartphone-assisted fluorescent sensor based on europium/zirconium metal-organic framework (Eu0.5/Zr0.5-MOF) was developed for the fast and sensitive determination of doxycycline (DOX) and L-arginine (Arg). After the addition of DOX, the fluorescence of Eu0.5/Zr0.5-MOF was quenched owing to the inner filter effect (IFE). When Arg was introduced into the Eu0.5/Zr0.5-MOF@DOX complex system, the fluorescence was recovered because the interaction between Arg and Eu0.5/Zr0.5-MOF@DOX weakened the IFE. Moreover, the Eu0.5/Zr0.5-MOF produced continuous fluorescence color changes for the visual measurement of DOX and Arg. The fluorescent probe for DOX and Arg offered broad linear ranges of 0.05-80 and 0.1-60 μg/mL, respectively, with detection limits as low as 2.07 and 67.5 ng/mL. The proposed method was successfully applied to monitor DOX in eggs and Arg in human serum. This work provides a powerful platform for the real-time and visual analysis of DOX and Arg in food and biological samples.

Bacteria-instructed synthesis of free radical polymers for highly sensitive detection of Escherichia coli and Staphylococcus aureus

BACKGROUND

Foodborne pathogens such as Escherichia coli and Staphylococcus aureus commonly found in food and water sources are the leading causes of foodborne disease outbreaks, which have become a worldwide issue that can lead to serious health problems and socio-economic losses. Therefore, the development of accurate and timely detection methods for these bacteria is essential to safeguard public health and food safety. However, due to the drawbacks of conventional detection methods such as complex operation, high cost, low specificity and sensitivity, developing efficient and sensitive techniques remains a challenge.

RESULTS

In this study, we developed a fluorescent biosensor based on bacteria-instructed atom transfer radical polymerization (ATRP) for ultrasensitive and specific detection of foodborne pathogenic bacteria. This approach first attaches initiators of ATRP to the surface of carboxylated Fe3O4 magnetic beads via transition metal and subsequently utilizes the distinctive copper-binding redox pathway of bacteria to reduce Cu(II) to Cu(I), which activates the surface-initiated polymerization for in situ growth of fluorescent polymer. This signal amplification strategy significantly enhanced the sensitivity of fluorescence analysis performance. Under optimal conditions, there was a perfect linear correlation between the fluorescence signal intensity and the logarithm of the concentrations of S. aureus and E. coli over the range from 103 CFU/mL to 108 CFU/mL, with the detection limits down to 102 CFU/mL for both.

SIGNIFICANCE

The fluorescent biosensor provides an efficient, sensitive and stable solution for the direct detection of S. aureus/E. coli, confirming the feasibility of the bacterial-instructed ATRP reaction as a signal amplification strategy. This detection method does not require the help of any external stimuli or complex equipment. Moreover, it shows great potential for application in detecting pathogenic bacteria in complex food samples.

Paper-Based Fluorescent Sensor for Rapid Multi-Channel Detection of Tetracycline Based on Graphene Quantum Dots Coated with Molecularly Imprinted Polymer

In this paper, we developed a paper-based fluorescent sensor using functional composite materials composed of graphene quantum dots (GQDs) coated with molecularly imprinted polymers (MIPs) for the selective detection of tetracycline (TC) in water. GQDs, as eco-friendly fluorophores, were chemically grafted onto the surface of paper fibers. MIPs, serving as the recognition element, were then wrapped around the GQDs via precipitation polymerization using 3-aminopropyltriethoxysilane (APTES) as the functional monomer. Optimal parameters such as quantum dot concentration, grafting time, and elution time were examined to assess the sensor's detection performance. The results revealed that the sensor exhibited a linear response to TC concentrations in the range of 1 to 40 µmol/L, with a limit of detection (LOD) of 0.87 µmol/L. When applied to spiked detection in actual water samples, recoveries ranged from 103.3% to 109.4%. Overall, this paper-based fluorescent sensor (MIPs@GQDs@PAD) shows great potential for portable, multi-channel, and rapid detection of TC in water samples in the future.

Advances in magnetic analytical extraction techniques for detecting antibiotic residues in edible samples

The widespread use of antibiotics in agricultural and animal husbandry to treat bacterial illnesses has resulted in a rise in antibiotic-resistant bacteria. These bacteria can grow when antibiotic residues are present in food items, especially in edible animal products. As a result, it is crucial to monitor and regulate the amounts of antibiotics in food. Magnetic analytical extractions (MAEs) have emerged as a potential approach for extracting antibiotic residues from food using magnetic nanoparticles (MNPs). Recent improvements in MAEs have resulted in the emergence of novel MNPs with better selectivity and sensitivity for the extraction of antibiotic residues from food samples. Consequently, this review paper addresses current developments in MAE for extracting antibiotic residues from edible samples. It also provides a critical analysis of contemporary MAE practices. The current issues and potential future developments in this field are also discussed, thereby providing a framework for future study paths.

Bimetallic Ag/Au nanoclusters encapsulated in ZIF-8 framework: A novel strategy for ratiometric fluorescence detection of doxycycline in food

This study successfully encapsulated the Ag+-doped Au nanoclusters (Ag/AuNCs) within the ZIF-8 framework to construct a novel Ag/AuNCs@ZIF-8 ratiometric fluorescent probe for the antibiotic doxycycline (DOX) detection. The incorporation of Ag+ contributed to the fluorescence enhancement of the nanoclusters through the "silver effect", consequently improving the stability of the developed bimetallic Ag/AuNCs. Furthermore, the encapsulation of bimetallic Ag/AuNCs within the ZIF-8 framework restricted their intramolecular vibrations, resulting in further amplification of fluorescence intensity at 595 nm. The ZIF-8 also sensitized the restoration of DOX green fluorescence at 515 nm. Within the concentration range of 0.001-20 μg mL-1, the ratio of fluorescence intensity (F515/F595) exhibited a favorable linearity for DOX concentration, with a detection limit of 36.8 ng mL-1. This ratiometric fluorescence approach had the promising potential for accurate and efficient quantitative detection of DOX residue in food and served as a valuable reference for rapid monitoring of food contaminants.

A novel fluorescence platform for specific detection of tetracycline antibiotics based on [MQDA-Eu3+] system

Tetracycline antibiotics (TCs) are extensively used in clinical medicine, animal husbandry, and aquaculture because of their cost-effectiveness and high antibacterial efficacy. However, the presence of TCs residues in the environment poses risks to humans. In this study, an inner filter effect (IFE) fluorescent probe, 2,2'-(ethane-1,2-diylbis((2-((2-methylquinolin-8-yl)amino)-2-oxoethyl)azanediyl))diacetic acid (MQDA), was developed for the rapid detection of Eu3+ within 30 s. And its complex [MQDA-Eu3+] was successfully used for the detection of TCs. Upon coordination of a carboxyl of MQDA with Eu3+ to form a [MQDA-Eu3+] complex, the carboxyl served as an antenna ligand for the effective detection of Eu3+ to intensify the emission intensity of MQDA via "antenna effect", the process was the energy absorbed by TCs via UV excitation was effectively transferred to Eu3+. Fluorescence quenching of the [MQDA-Eu3+] complex was caused by the IFE in multicolor fluorescence systems. The limits of detection of [MQDA-Eu3+] for oxytetracycline, chlorotetracycline hydrochloride, and tetracycline were 0.80, 0.93, and 1.7 μM in DMSO/HEPES (7:3, v/v, pH = 7.0), respectively. [MQDA-Eu3+] demonstrated sensitive detection of TCs in environmental and food samples with satisfactory recoveries and exhibited excellent imaging capabilities for TCs in living cells and zebrafish with low cytotoxicity. The proposed approach demonstrated considerable potential for the quantitative detection of TCs.

Current trends of functional monomers and cross linkers used to produce molecularly imprinted polymers for food analysis

Molecularly imprinted polymers (MIPs) as artificial synthetic receptors are in high demand for food analysis due to their inherent molecular recognition abilities. It is common practice to employ functional monomers with basic or acidic groups that can interact with analyte molecules via hydrogen bonds, covalent bonds, and other interactions (π-π, dipole-ion, hydrophobic, and Van der Waals). Therefore, selecting the appropriate functional monomer and cross-linker is crucial for determining how precisely they interact with the template and developing the polymeric network's three-dimensional structure. This study summarizes the advancements made in MIP's functional monomers and cross-linkers for food analysis from 2018 to 2023. The subsequent computational design of MIP has been thoroughly explained. The discussion has concluded with a look at the difficulties and prospects for MIP in food analysis.

Molecular imprinting-based triple-emission ratiometric fluorescence sensor with aggregation-induced emission effect for visual detection of doxycycline

The development of high-performance sensors for doxycycline (DOX) detection is necessary because its residue accumulation will cause serious harm to human health and the environment. Here, a novel tri-emission ratiometric fluorescence sensor was proposed by using "post-mixing" strategy of different emissions fluorescence molecularly imprinted polymers with salicylamide as dummy template (DMIPs). BSA was chosen as assistant functional monomer, and also acted as sensitizers for the aggregation-induced emission (AIE) effect of DOX. The blue-emitting carbon dots and the red-emitting CdTe quantum dots were separately introduced into DMIPs as the response signals. Upon DOX recognition within 2 min, blue and red fluorescence of the tri-emission DMIPs sensor were quenched while green fluorescence of DOX was enhanced, resulting in a wide range of color variations observed over bluish violet-rosered-light pink-orange-yellow-green with a detection limit of 0.061 μM. The sensor possessed highly selective recognition and was successfully applied to detect DOX in complicated real samples. Moreover, with the fluorescent color collection and data processing, the smartphone-assisted visual detection of the sensors showed satisfied sensitivity with low detection limit. This work provides great potential applications for rapid and visual detection of antibiotics in complex substrates.

Detection of Doxycycline Using Carbon Quantum dots as Probe Based on Internal Filtering Effect

The establishment of a convenient and effective detection method for doxycycline (DC) holds significant importance in drug monitoring and drug residue assessment. In this work, carbon quantum dots (CQDs) with excellent and stable luminescence performance (the quantum yield of CQDs was 21.8%) were synthesized by the melting method and employed as probes to monitor the fluorescence intensity variations before and after the introduction of DC. A fluorescence analytical method based on the internal filtration effect (IFE) was developed for DC determination. The mechanism of DC quenching CQDs was verified using fluorescence lifetime tests, absorption spectroscopy, and evaluation of internal filtration parameters. After optimizing experimental conditions, it was found that the DC concentration (CDC) exhibited a good linear relationship with the fluorescence quenching efficiency ((F0-F)/F0) of CQDs in the range of 5-30 µM. The fitted linear equation was Y = 0.01249*CDC+0.03625, R2 = 0.9987, and the detection limit was 2.343 µM (n = 8). This developed method has been successfully applied to accurately determine DC concentrations in both doxycycline hydrochloride tablets and human serum samples. It stands out for its simplicity, rapidity, and acceptable detection performance. Due to its advantages, this method holds great promise for application in the biomedical field for monitoring DC drug concentrations and ensuring quality control.

FADH2-mediated radical polymerization amplification for microRNA-21 detection

For early diagnosis of disease, ultrasensitive mircoRNA-21 detection has considerable potential. In this paper, an ultra-sensitive fluorescence detection method for microRNA was developed by atom transfer radical polymerization (ATRP). This ATRP reaction was first initiated by using flavin mononucleotide (FADH2). The DNA probe 1 modified with amino group was fixed on the magnetic nanoparticle Fe3O4, and microRNA-21 was added to form the probe 1-microRNA-21. Another carboxy-modified DNA 2 forms a sandwich structure with the bound microRNA-21. Two terminally modified DNA types are used as microRNA probes, using complementary base pairing to form a stable super-sandwich structure between the DNA probe and the microRNA. Under optimal conditions, microRNA was detected in PBS buffer with a detection limit of 0.19 fM. And even in 10% of human serum, microRNA-21 can be detected with a detection limit of 47.8 fM. Results show that this method has high selectivity, efficiency and stability, which broad application prospect in microRNA ultra-sensitive detection.

Synthesis of oil-soluble carbon dots via pyrolysis and their diverse applications in doxycycline detection, fluorescent ink and film

The overuse of doxycycline poses a risk for ecological environment. Advanced materials such as anti-counterfeiting and photovoltaic materials are urgently needed to develop innovative strategies for exploiting solar cells and protecting valuable products. Herein, oil-soluble CDs (o-CDs) were successfully fabricated from citric acid, tris-base and oleylamine as precursors via pyrolysis method. The o-CDs with uniform size distribution exhibited a high quantum yield of 0.48 and excellent photostability. The fluorescence of o-CDs was rapidly quenched by doxycycline at room temperature without further modification. Optimal conditions were selected to construct a fluorescence probe with high selectivity and good sensitivity to detect doxycycline. Interestingly, the probe achieved two linear ranges of 0.85--16.7 µM and 16.7--33.4 µM with a low detection limit of 0.26 µM. Furthermore, inner filter effect (IFE) was dominated in the process in which doxycycline interact with the oxygen-containing groups of o-CDs. This sensing platform has been further successfully applied to the detection of doxycycline in milk with recovery rates of 96.8%- 102.7% and relative standard deviations of 0.98%- 1.02%, suggesting that the novel probe has the potential to be applied in real samples. Moreover, o-CDs directly serve as fluorescence ink and work as fluorescence film using PVA as matrix because of strong fluorescence in the solid state, indicating that they have potential applications in anti-counterfeiting and photovoltaic materials. This is the first report that oil-soluble CDs via pyrolysis is applied in the detection of doxycycline in milk. Importantly, this work provides efficient strategies for the construction of anti-counterfeiting and photovoltaic materials.

Histidine-capped copper nanoclusters for in situ amplified fluorescence monitoring of doxycycline through inner filter effect

There is a significant need to accurately measure doxycycline concentrations in view of the adverse effects of an overdose on human health. A fluorescence (FL) detection method was adopted and copper nanoclusters (CuNCs) were synthesized using chemical reduction technology. Based on FL quenching with doxycycline, the prepared CuNCs were used to explore a fluorescent nanoprobe for doxycycline detection. In an optimal sensing environment, this FL nanosensor was sensitive and selective in doxycycline sensing and displayed a linear relationship in the range 0.5-200 μM with a detection limit of 0.092 μΜ. A characterization test demonstrated that CuNCs offered active functional groups for identifying doxycycline using electrostatic interaction and hydrogen bonds. Static quenching and the inner filter effect (IFE) resulted in weakness in the FL of His@CuNCs with doxycycline with great efficiency. This suggested nanosensor was revealed to be a functional model for simple and rapid detection of doxycycline in real samples with very pleasing accuracy.

Highly selective and sensitive determination of doxycycline integrating enrichment with thermosensitive magnetic molecular imprinting nanomaterial and carbon dots based fluorescence probe

Doxycycline (DOX), a typical tetracycline antibiotic, is widely used because of its excellent antibacterial activity. To develop effective method for DOX has attracted much more attention. Herein, a new detection technology integrating magnetic solid phase extraction (MSPE) based on thermosensitive magnetic molecularly imprinted polymers (T-MMIPs) and fluorescence spectrometry based on carbon dots (CDs) was established. Thermosensitive magnetic molecularly imprinted polymers (T-MMIPs) was designed for selective enrichment of trace DOX. The synthesized T-MMIPs showed excellent selectivity for DOX. The adsorption performance of T-MMIPs varied with temperature in different solvents, which could achieve the enrichment and rapid desorption of DOX. In addition, the synthesized CDs had stable fluorescent property and better water-solubility, and the fluorescence of CDs was significantly quenched by DOX due to the internal filtration effect (IFE). Under the optimized conditions, the method resulted in good linearity over the range from 0.5 to 30 μg L-1, and the limit of detection was 0.2 μg L-1. The constructed detection technology was validated with real water samples, and excellent spiked recoveries from 92.5 % to 105.2 % were achieved. These data clearly indicated that the proposed technology was rapid, highly selective, environmentally friendly, and possessed significant potential application and development prospects.

Recent Advances in Polymer-Based Biosensors for Food Safety Detection

The excessive use of pesticides and drugs, coupled with environmental pollution, has resulted in the persistence of contaminants on food. These pollutants tend to accumulate in humans through the food chain, posing a significant threat to human health. Therefore, it is crucial to develop rapid, low-cost, portable, and on-site biosensors for detecting food contaminants. Among various biosensors, polymer-based biosensors have emerged as promising probes for detection of food contaminants in recent years, due to their various functions such as target binding, enrichment, and simple signal reading. This paper aims to discuss the characteristics of five types of food pollutants-heavy metals, pesticide residues, pathogenic bacteria, allergens, and antibiotics-and their adverse effects on human health. Additionally, this paper focuses on the principle of polymer-based biosensors and their latest applications in detecting these five types of food contaminants in actual food samples. Furthermore, this review briefly examines the future prospects and challenges of biosensors for food safety detection. The insights provided in this review will facilitate the development of biosensors for food safety detection.

Strategic preparation of porous magnetic molecularly imprinted polymers via a simple and green method for high-performance adsorption and removal of meropenem

In this study, a facile method has been developed to synthesize a novel type of porous magnetic molecularly imprinted polymers (Fe₃O₄-MER-MMIPs) for the selective adsorption and removal of meropenem. The Fe₃O₄-MER-MMIPs, with abundant functional groups and sufficient magnetism for easy separation, are prepared in aqueous solutions. The porous carriers reduce the overall mass of the MMIPs, greatly improving their adsorption capacity per unit mass and optimizing the overall value of the adsorbents. The green preparation conditions, adsorption performance, and physical and chemical properties of Fe₃O₄-MER-MMIPs have been carefully studied. The developed submicron materials exhibit a homogeneous morphology, satisfactory superparamagnetism (60 emu g^-1), large adsorption capacity (11.49 mg g^-1), quick adsorption kinetics (40 min), and good practical implementation in human serum and environmental water. Finally, the protocol developed in this work delivers a green and feasible method for synthesizing highly efficient adsorbents for the specific adsorption and removal of other antibiotics as well.

A novel nanostructured organic framework sensor for selective and sensitive detection of doxycycline based on fluorescence enhancement

It is critical for human health to develop sensitive and rapid analytical methods for detecting doxycycline (DOX) residues in food. This paper presents a novel metal-organic framework nanomaterial (Zn-MOF) based on dithiodiglycolic acid and its application in DOX detection by fluorescent probe method. Zn-MOF itself does not fluoresce. When DOX is added, the system exhibits strong fluorescence (100-fold) at 530 nm. The fluorescence intensity displayed an excellent linear relationship with DOX concentration with a detection limit of 2.7 nM. The reaction solution's fluorescence displayed a visible color shift from colorless to yellow that was concentration-dependent. A smartphone was used to detect DOX by recognizing the red, green, and blue values of the reaction solution and the corresponding test paper. The use of smartphones can speed up the detection process and streamline operations, offering a sensitive and visible method for the quantitative detection of DOX residues in actual samples. Interestingly, Zn-MOF can discriminate DOX from other tetracyclines with high selectivity. This material has been used successfully as a fluorescent probe to determine DOX in fish samples with an average spiked recovery of 94.6 % ∼ 95.1 %. The DOX levels in the measured perch samples were 1.25 ∼ 157 μg/kg. There are 2 batches of DOX exceeding the standard in 14 batches.

Molecularly Imprinted Polymer-Based Luminescent Chemosensors

Molecularly imprinted polymer (MIP)-based luminescent chemosensors combine the advantages of the highly specific molecular recognition of the imprinting sites and the high sensitivity with the luminescence detection. These advantages have drawn great attention during the past two decades. Luminescent molecularly imprinted polymers (luminescent MIPs) towards different targeted analytes are constructed with different strategies, such as the incorporation of luminescent functional monomers, physical entrapment, covalent attachment of luminescent signaling elements on the MIPs, and surface-imprinting polymerization on the luminescent nanomaterials. In this review, we will discuss the design strategies and sensing approaches of luminescent MIP-based chemosensors, as well as their selected applications in biosensing, bioimaging, food safety, and clinical diagnosis. The limitations and prospects for the future development of MIP-based luminescent chemosensors will also be discussed.

A surface plasmon resonance sensor with synthetic receptors decorated on graphene oxide for selective detection of benzylpenicillin

Antibiotic residues in foods, water and the environment reveal antibiotic-resistant bacterial strains, disrupting the ecological balance and causing serious health problems. For these reasons, the detection of antibiotic residues is crucial for the protection of human health. Herein, the detection of benzylpenicillin antibiotic from aqueous and milk sample solutions was carried out by surface plasmon resonance (SPR) sensor using synthetic receptor-molecularly imprinted polymer. The benzylpenicillin-imprinted poly(hydroxyethyl methacrylate-graphene oxide-N-methacryloyl-l-phenylalanine) (MIP-GO) SPR sensor was prepared. Benzylpenicillin detection was performed by MIP-GO SPR sensor in a 1-100 ppb concentration range of benzylpenicillin with 0.9665 linear correlation and 0.021 ppb detection limit. Selectivity analysis showed that the MIP-GO SPR sensor detected the benzylpenicillin molecule 8.16 times more selectively than amoxicillin and 14.04 times more selectively than ampicillin. To examine the imprinting efficiency, non-imprinted poly(hydroxyethyl methacrylate-graphene oxide-N-methacryloyl-l-phenylalanine) (NIP-GO) SPR sensor was also prepared using the same procedure without benzylpenicillin addition. Since graphene oxide (GO) was added to enhance the sensor signal response by increasing sensitivity, the control analyses were performed by a poly(hydroxyethyl methacrylate-N-methacryloyl-l-phenylalanine) (MIP) SPR sensor without adding GO. Moreover, repeatability studies of MIP-GO SPR sensor were statistically evaluated and the RSD of intra-day assays less than 1% specified that there was no loss of performance for the benzylpenicillin detection ability even after four cycles. As a real food sample analysis, the benzylpenicillin spiked and unspiked milk samples were evaluated and high-performance liquid chromatography experiments were carried out for validation.

An advantageous application of molecularly imprinted polymers in food processing and quality control

In the global market era, food product control is very challenging. It is impossible to track and control all production and delivery chains not only for regular customers but also for the State Sanitary Inspections. Certified laboratories currently use accurate food safety and quality inspection methods. However, these methods are very laborious and costly. The present review highlights the need to develop fast, robust, and cost-effective analytical assays to determine food contamination. Application of the molecularly imprinted polymers (MIPs) as selective recognition units for chemosensors' fabrication was herein explored. MIPs enable fast and inexpensive electrochemical and optical transduction, significantly improving detectability, sensitivity, and selectivity. MIPs compromise durability of synthetic materials with a high affinity to target analytes and selectivity of molecular recognition. Imprinted molecular cavities, present in MIPs structure, are complementary to the target analyte molecules in terms of size, shape, and location of recognizing sites. They perfectly mimic natural molecular recognition. The present review article critically covers MIPs' applications in selective assays for a wide range of food products. Moreover, numerous potential applications of MIPs in the food industry, including sample pretreatment before analysis, removal of contaminants, or extraction of high-value ingredients, are discussed.

Smartphone-assisted ratiometric fluorescence sensing platform for the detection of doxycycline based on BCNO QDs and calcium ion

A novel colorimetric and ratiometric fluorescence sensor has been established based on boron carbon oxynitride quantum dots (BCNO QDs) and Ca²⁺ for the detection of doxycycline (DOX). BCNO QDs were synthesized by microwave-assisted method with boric acid and ethylenediamine. The fluorescence of BCNO QDs at 425 nm was quenched due to the electrostatic interaction and inner filter effect with doxycycline. Meanwhile, doxycycline was combined with Ca²⁺ to form a fluorescence complex, which generated a new fluorescence peak at 520 nm. The fluorescence intensity ratio (F₅₂₀/F₄₂₅) has a good linear relationship with doxycycline concentration, and the detection limit is 25 nM. Moreover, the fluorescence of the reaction solution showed a concentration-dependent visual color change from blue to green. In order to facilitate further application, a portable fluorescent test paper which is easy to store was prepared. The RGB values of the reaction solution and corresponding test paper were identified by smartphone, and the visual detection of doxycycline was performed by digital image colorimetric analysis. The application of smartphone and fluorescent test paper can effectively shorten the detection time and simplified the operation, providing an effective scheme for quantitative detection of doxycycline in actual samples. Overall, this work provides a method for the detection of doxycycline and shows that the BCNO QDs have great potential application in food safety.

Rapid and selective extraction of norfloxacin from milk using magnetic molecular imprinting polymers nanoparticles

The magnetic molecular imprinting polymers nanoparticles (MMIPs NPs) for the extraction of norfloxacin (NOR) were prepared by self-polymerization of dopamine onto the surface of (3-Aminopropyl)triethoxysilane (APTES)-modified Fe₃O₄ NPs. The MMIPs NPs were characterized by FT-IR spectroscopy, XRD, VSM and TEM. The characterization results show that the MMIPs NPs possess superparamagnetic characteristic with the saturated magnetization value of 38.6 emu/g, and the average particle size of about 14.3 nm. Furthermore, the adsorption performance of the MMIPs NPs was evaluated by the static, dynamic, selective adsorption and reusability experiments. The adsorption capacity of MMINs NPs for NOR is 14.2 mg/g with an imprinted factor of 2.1. About 82.4-102.4% of the added NOR (20, 40, 60 μg/mL) were recovered from fortified milk samples with MMIPs NPs as sorbent. Moreover, the MMIPs NPs can be reused for at least six times.

Green synthesis as a simple and rapid route to protein modified magnetic nanoparticles for use in the development of a fluorometric molecularly imprinted polymer-based assay for detection of myoglobin

We have developed a low-cost molecularly imprinted polymer (MIP)-based fluorometric assay to directly quantify myoglobin in a biological sample. The assay uses a previously unreported method for the development of microwave-assisted rapid synthesis of aldehyde functionalized magnetic nanoparticles, in just 20 min. The aldehyde functionalized nanoparticles have an average size of 7.5 nm ± 1.8 and saturation magnetizations of 31.8 emu g-1 with near-closed magnetization loops, confirming their superparamagnetic properties. We have subsequently shown that protein tethering was possible to the aldehyde particles, with 0.25 ± 0.013 mg of myoglobin adsorbed to 20 mg of the nanomaterial. Myoglobin-specific fluorescently tagged MIP (F-MIP) particles were synthesized and used within the assay to capture myoglobin from a test sample. Excess F-MIP was removed from the sample using protein functionalized magnetic nanoparticles (Mb-SPION), with the remaining sample analyzed using fluorescence spectroscopy. The obtained calibration plot of myoglobin showed a linear correlation ranging from 60 pg ml-1 to 6 mg ml-1 with the limit of detection of 60 pg ml-1. This method was successfully used to detect myoglobin in spiked fetal calf serum, with a recovery rate of more than 93%.

A recyclable tetracycline imprinted polymeric SPR sensor: in synergy with itaconic acid and methacrylic acid

A novel tetracycline (TC) imprinted polymer was prepared in visible light via synergy of dual functional group monomers methacrylic acid (MAA) and itaconic acid (IA) for selective detection of TC in urine and milk samples.

Recent Advances of Conducting Polymers and Their Composites for Electrochemical Biosensing Applications

Conducting polymers (CPs) have been at the center of research owing to their metal-like electrochemical properties and polymer-like dispersion nature. CPs and their composites serve as ideal functional materials for diversified biomedical applications like drug delivery, tissue engineering, and diagnostics. There have also been numerous biosensing platforms based on polyaniline (PANI), polypyrrole (PPY), polythiophene (PTP), and their composites. Based on their unique properties and extensive use in biosensing matrices, updated information on novel CPs and their role is appealing. This review focuses on the properties and performance of biosensing matrices based on CPs reported in the last three years. The salient features of CPs like PANI, PPY, PTP, and their composites with nanoparticles, carbon materials, etc. are outlined along with respective examples. A description of mediator conjugated biosensor designs and enzymeless CPs based glucose sensing has also been included. The future research trends with required improvements to improve the analytical performance of CP-biosensing devices have also been addressed.

The Use of Aptamers and Molecularly Imprinted Polymers in Biosensors for Environmental Monitoring: A Tale of Two Receptors

Effective molecular recognition remains a major challenge in the development of robust receptors for biosensing applications. Over the last three decades, aptamers and molecularly imprinted polymers (MIPs) have emerged as the receptors of choice for use in biosensors as viable alternatives to natural antibodies, due to their superior stability, comparable binding performance, and lower costs. Although both of these technologies have been developed in parallel, they both suffer from their own unique problems. In this review, we will compare and contrast both types of receptor, with a focus on the area of environmental monitoring. Firstly, we will discuss the strategies and challenges involved in their development. We will also discuss the challenges that are involved in interfacing them with the biosensors. We will then compare and contrast their performance with a focus on their use in the detection of environmental contaminants, namely, antibiotics, pesticides, heavy metals, and pathogens detection. Finally, we will discuss the future direction of these two technologies.

Colorimetric detection of serum doxycycline with d-histidine-functionalized gold nanoclusters as nanozymes

An assay for selective detection of DC was developed due to the nanozymatic activity of d-His@AuNCs inhibited by Cu²⁺ and restored by DC.

A versatile and recyclable molecularly imprinted polymer as an oxidative catalyst of sulfur derivatives: a new possible method for mustard gas and V nerve agent decontamination

A molecularly imprinted polymer containing a porphyrin unit was developed as a biomimetic heterogenous catalyst for the oxidation of sulfur derivatives. Its catalytic efficiency under mild conditions and its easy recovery represent a great asset for the design of new decontamination tools for yperite and VX.

A novel ratiometric fluorescence probe for highly sensitive and specific detection of chlorotetracycline among tetracycline antibiotics

It is of great importance to detect chlorotetracycline (CTC) in a highly sensitive and specific way because of its wide distribution in aquaculture and animal husbandry. Herein, we propose a novel ratiometric fluorescence strategy to assay CTC by using bovine serum albumin stabilized gold nanoclusters (BSA-AuNCs). The BSA-AuNCs consisting of 25 gold atoms (Au₂₅NCs) display a red emission at 640 nm (λ_ex = 370 nm). In the presence of CTC, a new blue emission at 425 nm is emerged and its intensity dramatically increases with the addition of more the analyte; meanwhile the red emission at 640 nm shows a linear decrease reversely. However, at identical conditions neither the analogues of CTC as tetracycline (TC), oxytetracycline (OTC) or doxycycline (DC) induces similar response of BSA-AuNCs. Such interesting phenomenon is proven related to the conversion from large Au₂₅NCs to smaller nanoclusters composing 8 gold atoms (Au₈NCs), which intrinsically originate from the interaction between CTC and the ligand BSA. Therefore, a ratiometric probe is established to sensitively detect CTC in the wide range (0.2-10 μM) with a low limit of detection (LOD) at 65 nM. In addition, this strategy can also be applied to assay CTC in human serum, showing great promise for practical applications in future.

Fluorescent Nanosensor Based on Molecularly Imprinted Polymers Coated on Graphene Quantum Dots for Fast Detection of Antibiotics

In this work, we developed a novel fluorescent sensor by combining molecularly imprinted polymers (MIPs) with graphene quantum dots (GQDs) for the determination of tetracycline (TC) in aqueous samples. Firstly, we developed a one-pot green method to synthesize GQDs as the fluorescent probes. GQDs with carboxyl groups or amino groups were fabricated. It was found that carboxyl groups played an important role in the fluorescence quenching. Based on these findings, the GQDs-MIPs microspheres were prepared using a sol-gel process. GQDs-MIPs showed strong fluorescent emission at 410 nm when excited at 360 nm, and the fluorescence was quenched in the presence of TC. Under optimum conditions, the fluorescence intensity of GQDs-MIPs decreased in response to the increase of TC concentration. The linear rage was from 1.0 to 10⁴ µg·L-1, and the limit of detection was determined to be 1 µg·L-1. The GQDs-MIPs also demonstrated high selectivity towards TC. The fluorescent sensor was successfully applied for the detection of TC in real spiked milk samples.