High oxidase-mimic activity of Fe nanoparticles embedded in an N-rich porous carbon and their application for sensing of dopamine

Silver nanoparticles loaded carbon-magnetic nanocomposites: A nanozyme for colorimetric detection of dopamine

Dopamine (DA) is catecholamine neurotransmitters that play an important role in the central nervous system. In recent years people started to intentionally add DA to animal feed to enhance muscle development and increase their profit margin. Human consumption of the residual DA from animal tissues has been reported to be associated with the development of such diseases as Parkinson's disease, epilepsy, senile dementia, and schizophrenia and pose serious human health risks. These require development of rapid, cheap, and sensitive methods for detection of DA from animal tissue. Compared to other techniques that require access to expensive instruments, skilled human power, and tiresome routine procedures, colorimetric methods provide cheap and reliable options for detection of DA. Here we report a colorimetric method based on the peroxidase-mimic activity of Fe3O4@C@AgNPs for the detection of DA. A simple wet chemical method was employed to synthesize AgNPs on hydrophilic carbon coated Fe3O4. The produced nanocomposites were characterized by transmission electron microscopy (TEM), Fourier Transform infrared spectroscopy (FTIR), and surface-enhanced Raman spectroscopy (SERS). The detection of DA was done based on inhibition of the peroxidase-like activity of Fe3O4@C@AgNPs using 3, 3', 5, 5'-tetramethylbenzidine (TMB) as a substrate. In the presence of DA, however, the peroxidase-like activity started to decrease. The decrease in activity was concentration dependent showing a linear relationship in the range of 0.5-80 µM. In this linear range, the limit of detection (LOD) was computed and found to be as low as 0.12 µM. Therefore, we propose that the peroxidase-like activity of Fe3O4@C@AgNPs could be used for quantitative detection of DA from different samples.

A Smartphone-Enabled Colorimetric Microneedle Sensing Platform for Rapid Detection of Ascorbic Acid in Fruits

Achieving rapid extraction and detection of analytical solutions from plant tissues to circumvent cumbersome procedures and reduce the dependence on detection instruments remains a challenge. Herein, a colorimetric microneedle integrated platform was developed for the rapid extraction and detection of plant fluids for testing purposes. Colorimetric microneedle patches (CMPs) offer a swift and effective method to swiftly extract and detect ascorbic acid (AA) within 10 min from various fruit crops like mango, nectarine, apple, pear, and kiwifruit, facilitated by a smartphone application. CMPs are constructed for the rapid and sensitive analysis of AA with good linearity amid the range 0.05-25 μM and a low limit of detection of 30 nM. The novel CMPs demonstrate significant potential as a rapid detection platform for AA in plants. CMPs offer significant advantages over traditional ultraviolet spectrophotometry, such as simplified operational procedures and accelerated extraction and detection processes. This establishes robust groundwork for conducting in situ extraction and molecular detection of diverse crops across a spectrum of application scenarios.

Carbon-based nanozymes: design, catalytic mechanisms, and environmental applications

Carbon-based nanozymes are synthetic nanomaterials that are predominantly constituted of carbon-based materials, which mimic the catalytic properties of natural enzymes, boasting features such as tunable catalytic activity, robust regenerative capacity, and exceptional stability. Due to the impressive enzymatic performance similar to various enzymes such as peroxidase, superoxide dismutase, and oxidase, they are widely used for detecting and degrading pollutants in the environment. This paper presents an exhaustive review of the fundamental design principles, catalytic mechanisms, and prospective applications of carbon-based nanozymes in the environmental field. These studies not only serve to augment the comprehension on the intricate operational mechanism inherent in these synthetic nanostructures, but also provide essential guidelines and illuminating perspectives for advancing their development and practical applications. Future studies that are imperative to delve into the untapped potential of carbon-based nanozymes within the environmental domain was needed to be explored to fully harness their ability to deliver broader and more impactful environmental preservation and management outcomes.

Oxidized 3,3',5,5'-tetramethylbenzidine nanobelts enhance colorimetric sensing of H2O2

Herein, oxidized 3,3',5,5'-tetramethylbenzidine (oxTMB) nanobelts were developed to enhance the colorimetric and paper-based sensing of H2O2. It was found that the minor component of Fe2+ in Na2SO4 reagent could catalyze the oxidization of TMB by H2O2 into positively charged oxTMB, which was further assembled into dark blue oxTMB nanobelts via electrostatic interaction with SO42-. The extinction originating from the absorption and scattering of oxTMB nanobelts was utilized to quantitatively detect H2O2 with a wide linear detection range (1.0-300 μM) and a low limit of detection (0.48 μM). In addition, no coffee-ring effect was observed in the test zone of the paper-based colorimetric array, which was beneficial to judge the color by naked eye. Finally, the colorimetric method was applied to detect H2O2 in contact lens care solution. This work not only proposed a new colorimetric sensing platform for H2O2, but also highlighted the minor component in the reagent might influence the experimental result.

A high oxidase-like activity, bimetallic single-atom nanozyme FeCe/NC prepared by FeCe-ZIF-8 approach for sensing tannic acid in tea

To improve the activity of single-atom nanozymes (SAzymes) for applications in food analysis, a new bimetal SAzyme FeCe/NC was developed. Its oxidase-like activity is 40% higher than that of single metal SAzyme Fe/NC. Based on a series of characterization investigations, the catalytic mechanism is that it directly catalyzed O2 to generate •OH, O2 •-and 1O2. It could directly catalyze oxidation 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxTMB, thereunder, a FeCe/NC SAzyme-TMB colorimetric method for the detection of tannic acid (TA) was constructed after the optimization of catalytic conditions. The method has a high R2 of 0.995, a low limit of detection (LOD) of 0.26 μmol/L, and high stability. The detection performance was validated by the real samples (tea). Therefore, the prepared bimetallic SAzyme FeCe/NC can be applied for TA detection without the addition of H2O2, and will have broad applications in the areas of food, feed, and life science.

Application of Nanozymes and its Progress in the Treatment of Ischemic Stroke

Nanozymes are a new kind of material which has been applied since the beginning of this century, and its birth has promoted the development of chemistry, materials science, and biology. Nanozymes can be used as a substitute for natural enzyme and has a wide range of applications; therefore, it has attracted extensive attention from all sectors of the community, and the number of studies has constantly increasing. In this paper, we introduced the outstanding achievements in the field of nanozymes in recent years from the main function, the construction of nanozyme-based biosensors, and the treatment of ischemic stroke, and we also illustrated the internal mechanism and the catalytic principle. In the end, the obstacles and challenges in the future development of nanozymes were proposed.

Construction of a dual-signal readout platform for effective glutathione S-transferase sensing based on polyethyleneimine-capped silver nanoclusters and cobalt-manganese oxide nanosheets with oxidase-mimicking activity

A novel dual-mode fluorometric and colorimetric sensing platform is reported for determining glutathione S-transferase (GST) by utilizing polyethyleneimine-capped silver nanoclusters (PEI-AgNCs) and cobalt-manganese oxide nanosheets (CoMn-ONSs) with oxidase-like activity. Abundant active oxygen species (O2•-) can be produced through the CoMn-ONSs interacting with dissolved oxygen. Afterward, the pink oxDPD was generated through the oxidation of colorless N,N-diethyl-p-phenylenediamine (DPD) by O2•-, and two absorption peaks at 510 and 551 nm could be observed. Simultaneously, oxDPD could quench the fluorescence of PEI-AgNCs at 504 nm via the inner filter effect (IFE). However, in the presence of glutathione (GSH), GSH prevents the oxidation of DPD due to the reducibility of GSH, leading to the absorbance decrease at 510 and 551 nm. Furthermore, the fluorescence at 504 nm was restored due to the quenching effect of oxDPD on decreased PEI-AgNCs. Under the catalysis of GST, GSH and1-chloro-2,4-dinitrobenzo (CDNB) conjugate to generate an adduct, initiating the occurrence of the oxidation of the chromogenic substrate DPD, thereby inducing a distinct colorimetric response again and the significant quenching of PEI-AgNCs. The detection limits for GST determination were 0.04 and 0.21 U/L for fluorometric and colorimetric modes, respectively. The sensing platform illustrated reliable applicability in detecting GST in real samples.

N-Rich and Sulfur-Doped Nano Hollow Carbons with High Oxidase-like Activity Prepared Using a Green Template of CaCO3 for Bacteriostasis

Nanozymes, enzyme-mimicking nanomaterials, have attracted increasing attention due to their low cost, high stability, and catalytic ability compared with natural enzymes. However, the catalytic efficiency of the nanozymes is still relatively low, and catalytic reaction mechanisms remain unclear. To address these issues, herein we prepared nitrogen-riched and sulfur-codoped nano hollow carbons (N/S-HCS) using a green and useful template of CaCO3. N/S-HCS exhibits enhanced oxidase-like activity and catalytic kinetic performance. It could directly oxidize the colorless 3,3',5,5'-tetramethylbenzidine (TMB) to the heavy blue colored ox-TMB without H2O2. The maximum reaction rate (Vmax) is 186.7 × 10-8 M·s-1, and Michaelis-Menten constant (Km) is 0.162 mM. DFT results show that N and S codoping could work synergistically to provide more active sites, resulting in the superior ability to adsorb oxygen and enhanced catalytic activity. Meantime, we develop a multispectral characterization strategy to unravel catalytic reaction mechanisms about N/S-HCS. It successfully induces the generation of superoxide (•O2-) and hydroxyl (•OH) during the colorimetric reaction which are the key intermediate products of the catalytic reaction. Furthermore, N/S-HCS increased the cellular reactive oxygen species level significantly and induced bacteriostasis to more than 95% of Escherichia coli.

Research Progress in Iron-Based Nanozymes: Catalytic Mechanisms, Classification, and Biomedical Applications

Natural enzymes are crucial in biological systems and widely used in biology and medicine, but their disadvantages, such as insufficient stability and high-cost, have limited their wide application. Since Fe₃O₄ nanoparticles were found to show peroxidase-like activity, researchers have designed and developed a growing number of nanozymes that mimic the activity of natural enzymes. Nanozymes can compensate for the defects of natural enzymes and show higher stability with lower cost. Iron, a nontoxic and low-cost transition metal, has been used to synthesize a variety of iron-based nanozymes with unique structural and physicochemical properties to obtain different enzymes mimicking catalytic properties. In this perspective, catalytic mechanisms, activity modulation, and their recent research progress in sensing, tumor therapy, and antibacterial and anti-inflammatory applications are systematically presented. The challenges and perspectives on the development of iron-based nanozymes are also analyzed and discussed.

Copper Immobilized over 2D Hexagonal SBA-15 for Electrochemical and Colorimetric Sulfite Sensing

Sulfite (SO₃^2-) is considered a highly toxic anion for living organisms. Herein, we report the synthesis of copper immobilized over a 2D hexagonally ordered mesoporous silica material CuMS as an electrochemical and colorimetric dual-technique-based sensing platform for sulfite detection. The immobilization of copper on silica was achieved through the bis[3-(triethoxysilyl)propyl]tetrasulfide (TEPTS) ligand. Morphological and physical properties of the material were confirmed by several characterization techniques, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, N₂ sorption, and X-ray photoelectron spectroscopy. The CuMS material retained mesoporosity with a narrow pore size distribution (D ≈ 5.4 nm) and a high Brunauer-Emmett-Teller surface area of 682 m² g^-1 after the immobilization of copper. The prepared catalyst shows promising electrocatalytic activity toward sulfite oxidation. A linear variation in the peak current was obtained for SO₃^2- oxidation in the 0.2-15 mM range with a high sensitivity of 62.08 μA cm^-2, under optimum experimental conditions. The limit of detection (LOD) was found to be 1.14 nM. CuMS also shows excellent activity toward colorimetric detection of sulfite anions with an LOD of 0.4 nM. The proposed sensor shows high selectivity toward the sulfite anion, even in the presence of common interferents. The detection of sulfite in white wine with excellent recovery demonstrates the practical applicability of this sensor.

Balancing "on" and "off" response of hydroxyl groups to a nanozyme-catalyzing system for the construction of an ultra-sensitive and selective "signal-on" detection platform for dopamine

Targeting the functional groups present in analytes by nanozyme-catalyzed systems is a promising strategy to construct sensitive and selective platforms for the sensing of specific analytes. Herein, various groups (-COOH, -CHO, -OH, and -NH₂) on benzene were introduced in an Fe-based nanozyme system with MoS₂-MIL-101(Fe) as the model peroxidase nanozyme, H₂O₂ as the oxidizing agent, and TMB as the chromogenic substrate, and the effects of these groups at both a low concentration and high concentration were further investigated. It was found that the hydroxyl group-based substance catechol showed an "on" effect at a low concentration to increase the catalytic rate and enhance the absorbance signal, whereas an "off" effect at a high concentration with a decreased absorbance signal. Based on these results, the "on" mode and "off" mode for the biological molecule dopamine, a type of catechol derivative, were proposed. In the control system, MoS₂-MIL-101(Fe) catalyzed the decomposition of H₂O₂ to produce ROS, which further oxidized TMB. In the "on" mode, the hydroxyl groups of dopamine could combine with the Fe(iii) site of the nanozyme to lower its oxidation state, resulting in higher catalytic activity. In the "off" mode, the excess dopamine could consume ROS, which inhibited the catalytic process. Under the optimal conditions, by balancing the "on" and "off" modes, the "on" mode for the detection of dopamine was found to have better sensitivity and selectivity. The LOD was as low as 0.5 nM. This detection platform was successfully applied for the detection of dopamine in human serum with satisfactory recovery. Our results can pave the way for the design of nanozyme sensing systems with sensitivity and selectivity.

Shape-specific MOF-derived Cu@Fe-NC with morphology-driven catalytic activity: Mimicking peroxidase for the fluorescent- colorimetric immunosignage of ochratoxin

Ochratoxin A (OTA), which has strong hepatotoxicity and nephrotoxicity, can accumulate in the human body through the food chain; thus, the selective and effective detection of OTA is urgently required for food security. Nanozymes with hyperfine size and shape control have attracted attention because of their controllable structure and intrinsic activity. Herein, CuFe-bimetal coordinated N-doped carbon (Cu@Fe-NC) with morphology-driven peroxidase-mimicking activity was synthesized using Cu₂O with specific polygonal cubes and fully exposed {111} crystalline facets as the template to produce a CuFe-bimetallic metal organic framework (MOF) and further treating CuFe-MOF with high-temperature pyrolysis. N-doping can confer electronegativity to exhibit high affinity, while the large surface area of the porous carbon support can facilitate rapid adsorption-desorption equilibrium. Using the peroxidase-mimicking Cu@Fe_0.5-NC as a carrier, a versatile immunoassay for the detection of OTA was implemented based on the ratiometric fluorescence and the localized surface plasmon resonance peak shift, achieving a detection limit of 0.52 ng/L in the range of 0.001-10 μg/L. Therefore, the strategy of enhancing enzyme-mimicking activity using specific shapes and crystalline facets may open new avenues for food and environmental analysis.

Enzyme mimic nanomaterials as nanozymes with catalytic attributes

Nanozymes are super-efficient nanomaterials with enzyme-like characteristics, as the name suggests. In the last decade, efforts have been made to develop "artificial enzymes," which are alternatives to natural enzymes. As nanoscience and nanotechnology advance, nanozymes, which are catalytic nanomaterials having enzyme-like properties, have fascinated researchers' attention. Nanozymes with unique physicochemical properties and nanomaterials that mimic catalytic activity have gained a special interest in the industrial sectors. However, several constraints have hampered their effective deployment in industrial processes, including denaturation, time-consuming manufacturing, overall high cost-ratio, and reutilization challenges. After a brief overview of nanozyme research, an analysis of the similarities and differences between nanozymes and natural and synthetic enzymes is presented. Because of their distinct properties, nanozymes stand out in this comparison. Nanozymes have exhibited a variety of applications leveraging the physiochemical properties of nanomaterials, ranging from in vitro detection to enzyme substitution in biological systems. In addition, nanozymes have introduced a new field called nanozymology, which blends nanotechnology with enzymology.

Fluoride-assisted detection of glutathione by surface Ce3+/Ce4+ engineered nanoceria

Nanoceria has evolved as a promising nanomaterial due to its unique enzyme-like properties, including excellent oxidase mimetic activity, which significantly increases in the presence of fluoride ions. However, this significant increase in oxidase activity has never been utilised as a signal enhancer for the detection of biological analytes partly because of the lack of understanding of the mechanism involved in this process. In this study, we show that the surface oxidation state of cerium ions plays a very crucial role in different enzymatic activities, especially the oxidase mimetic activity by engineering nanoceria with three different surface Ce⁴⁺/Ce³⁺ compositions. Using DFT calculations combined with Bader charge analysis, it is demonstrated that stoichiometric ceria registers a higher oxidase mimetic activity than oxygen-deficient ceria with a low Ce⁴⁺/Ce³⁺ ratio due to a higher charge transfer from a substrate, 3,3',5,5' tetramethylbenzidine (TMB), to the ceria surface. We also show that the fluoride ions can significantly increase the charge transfer from the TMB surface to ceria irrespective of the surface Ce⁴⁺/Ce³⁺ ratio. Using this knowledge, we first compare the fluoride sensing properties of nanoceria with high Ce⁴⁺ and mixed Ce⁴⁺/Ce³⁺ oxidation states and further demonstrate that the linear detection range of fluoride ions can be extended to 1-10 ppm for nanoceria with mixed oxidation states. Then, we also demonstrate an assay for fluoride assisted detection of glutathione, an antioxidant with elevated levels during cancer, using nanoceria with a high surface Ce⁴⁺/Ce³⁺ ratio. The addition of fluoride ions in this assay allows the detection of glutathione in the linear range of 2.5-50 ppm with a limit of detection (LOD) of 3.8 ppm. These studies not only underpin the role of the surface Ce⁴⁺/Ce³⁺ ratio in tuning the fluoride assisted boost in the oxidase mimetic activity of nanoceria but also its strategic application in designing better colourimetric assays.

Synthesis of Co3O4 Nanoplates by Thermal Decomposition for the Colorimetric Detection of Dopamine

Inorganic nanomaterials with enzyme-like activity have been attracting much attention due to their low cost, favorable stability, convenient storage, and simple preparation. Herein, Co₃O₄ nanoplates with a uniform nanostructure were prepared by the thermolysis of cobalt hydroxide at different temperatures, and the influence of the annealing temperature on the performance of the mimetic enzyme also was reported for the first time. The results demonstrated that Co₃O₄ nanoplates obtained at an annealing temperature of 200 °C possessed strong oxidase activity and efficiently catalyzed the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) without the addition of hydrogen peroxide to generate the blue color product ox-TMB. Once the annealing temperature was increased to 500 °C and 800 °C, the oxidase activity of Co₃O₄ decreased rapidly, and was even inactivated. This might be attributed to the relatively large specific surface area of Co₃O₄ annealed at 200 °C. Besides this, based on the TMB-Co₃O₄ nanoplate system, a colorimetric analysis method was developed to detect dopamine with a limit of 0.82 μmol/L in a linear range from 1.6 μmol/L to 20 μmol/L.

In situ generated Fe3C embedded Fe-N-doped carbon nanozymes with enhanced oxidase mimic activity for total antioxidant capacity assessment

In this work, we reported new Fe₃C embedded Fe-N-doped carbon nanomaterials (Fe₃C@Fe-N-CMs) generated in situ by the facile pyrolysis of Fe-Zn ZIF precursors. The resulting Fe₃C@Fe-N-CMs were equipped with several desirable nanozyme features, including multiple efficient intrinsic active sites (i.e. Fe-N_x, Fe₃C@C, and C-N moieties), large specific surface area and abundant mesoporous structures. As a result, these Fe₃C@Fe-N-CMs displayed exceptional ability to mimic three enzymes: peroxidase, catalase and oxidase, while the Fe₃C@Fe-N-CMs pyrolyzed at 800 °C, named CMs-800, showed the best enzyme-like properties. After systematically investigating the catalytic mechanism, we further explored the application of the oxidase-like properties of CMs-800 in the detection of the total antioxidant capacity (TAC) in beverages and tablets. This study not only provided a new approach to construct multifunctional carbon-based nanozymes, but also expanded the application of carbon nanozymes in the field of food quality and safety.

A Library of ROS-Catalytic Metalloenzyme Mimics with Atomic Metal Centers

MetalN-coordinated centers supported by carbonaceous substrates have emerged as promising artificial metalloenzymes (AMEs) to mimic the biocatalytic effects of their natural counterparts. However, the synthesis of well-defined AMEs that contain different atomic metalN centers but present similar physicochemical and coordination structures remains a substantial challenge. Here, 20 different types of AMEs with similar geometries and well-defined atomic metalN-coordinated centers are synthesized to compare and disclose the catalytic activities, substrate selectivities, kinetics, and reactive oxygen species (ROS) products. Their oxidase (OXD)-, peroxidase (POD)-, and halogen peroxidase (HPO)-mimetic catalytic behaviors are systematically explored. The Fe-AME shows the highest OXD- and HPO-mimetic activities compared to the other AMEs due to its high v_max (0.927 × 10^-6 m s^-1 ) and low K_m (1.070 × 10^-3 m), while the Cu-AME displays the best POD-like performance. Furthermore, theoretical calculation reveals that the ROS-catalytic paths and activities are highly related to the electronic structures of the metal centers. Benefiting from its facile adsorption of H₂ O₂ molecule and lower energy barrier to generating •O₂ ^- , the Fe-AME displays higher ROS-catalytic performances than the Mn-AME. The engineered AMEs show not only remarkably high ROS-catalytic performances but also provide new guidance toward developing metalN-coordinated biocatalysts for broad application fields.

Nickel -doped iron oxide nanoparticle-conjugated porphyrin interface (porphyrin/Fe2O3@Ni) for the non-enzymatic detection of dopamine from lacrimal fluid

Herein, we synthesized nickel (Ni)-doped iron oxide nanoparticles (Fe₂O₃). The presence of the dopant afforded anchoring sites for the porphyrinic hetero cavity of 5,10,15,20-(tetra-4-carboxyphenyl)porphyrin to produce the porphyrin/Fe₂O₃@Ni composite. The crystalline structure and morphology of porphyrin/Fe₂O₃@Ni were assessed using various tools including Fourier transform spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and Raman spectroscopy. Porphyrin/Fe₂O₃@Ni has proven to be an excellent dopamine (DA) probe material with good selectivity, reproducibility, stability and reliability owing to its clever morphology, which induces numerous active sites along with good active surface area. It consequently provides good accessibility to DA and allows for the smooth tunneling of electrons between the analyte and sensing interface. Meanwhile, the porphyrin molecules provide good carbon-based resilient support, inhibit the leaching of the electrode matrix and enhance electron shuttling, resulting in the robust oxidation of DA with amplified transduction signals. The designed porphyrin/Fe₂O₃@Ni interface showed a low detection limit (1.2 nm) with good sensitivity (1.2 nM) in the linear bounds of 10 μM to 3500 μM. Additionally, the interface was employed successfully to analyze DA from lacrimal fluid with good percentage recoveries (99.8% to 100.1%). We anticipate that such a design will simplify the in vitro screening of DA in rarely studied tear samples with sensitivity and selectivity.

Nanozyme catalysis-assisted ratiometric multicolor sensing of heparin based on target-specific electrostatic-induced aggregation

Monitoring the level of heparin in clinical matrices is significant because of its pivotal role in preventing thrombosis. Compared to traditional single-signal sensors, multi-signal ratiometric detection can provide anti-interference results especially in complicated environments. However, fabricating an easy-to-operation, low-cost and robust sensor for the ratiometric detection of heparin still remains challenging. Here we propose a novel nanosensor for the ratiometric multicolor sensing of heparin with high performance. The sensor is based on the specific electrostatic interaction between the target and a positively charged species generated from nanozyme catalysis. FeMoO₄ nanorods are explored as an oxidase mimic for the first time, showing a high activity at neutral pH to catalyze the colorless 3,3',5,5'-tetramethylbenzidine (TMB) oxidation to blue TMBox with an absorbance at 652 nm. Heparin can induce the rapid aggregation of the produced TMBox intermediate with rich positive charges due to their strong electrostatic interaction, leading to the formation of a purple Heparin-TMBox complex providing a signal at 565 nm. With the increase of heparin, the color changes from blue to indigo and further purple, enabling the multicolor sensing of the target. As a result, ultrasensitive determination of heparin was obtained with a very low detection limit. The fabricated nanosensor could differentiate heparin from complex species with no interferences, and it provided reliable analytical results for heparin in both serum and plasma. With robust performance, low cost and facile fabrication, the sensor holds great potential in monitoring heparin for clinical applications.

Atomically dispersed Fe/Bi dual active sites single-atom nanozymes for cascade catalysis and peroxymonosulfate activation to degrade dyes

Constructing single-atom nanozymes (SAzymes) with densely exposed and dispersed double metal-N_x catalytic sites for pollution remediation remains rare and challenging. Herein, we report a novel Fe-Bi bimetallic MOF-derived carbon supported Fe-N₄ and Bi-N₄ dual-site FeBi-NC SAzyme for cascade catalysis and peroxymonosulfate activation to degrade dye pollutants, which is synthesized from the Fe-doped Bi-MOF as a precursor. The formation of both Fe-N₄ and Bi-N₄ sites is demonstrated by XANES and EXAFS. The FeBi-NC SAzyme has high single atoms loadings of Fe (2.61 wt%) and Bi (8.01 wt%), and displays 5.9- and 9.8-fold oxidase mimicking activity enhancement relative to the Fe-NC and Bi-NC SAzymes, respectively. When integrated acetylcholinesterase (AChE) and FeBi-NC SAzyme, a cascade enzyme-nanozyme system is developed for selective and sensitive screening of AChE activity with a low detection limit of 1 × 10^-4 mU mL^-1. Both Fe-N₄ and Bi-N₄ in FeBi-NC display a strong binding energy and electron donating capability to promote peroxymonosulfate activation to generate highly active intermediates for rhodamine B degradation. 100% rhodamine B removal occurs within 5 min via FeBi-NC mediated activation of peroxymonosulfate. The DFT calculations reveal that high activity of FeBi-NC is due to the isolated Fe-N₄ and Bi-N₄ sites and their synergy.

Colorimetric assay for the detection of dopamine using bismuth ferrite oxide (Bi2Fe4O9) nanoparticles as an efficient peroxidase-mimic nanozyme

This work describes the preparation of ternary bismuth ferrite oxide nanoparticles (Bi₂Fe₄O₉ NPs) with an enzyme mimetic activity for dopamine (DA) qualitative and quantitative detection. Bi₂Fe₄O₉ NPs were prepared using a facile, low cost, and one-pot hydrothermal treatment. The chemical composition, morphology, and optical properties of Bi₂Fe₄O₉ nanozyme were characterized using different techniques such as Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction pattern (XRD), X-ray photoelectron spectroscopy (XPS), thermo-gravimetric analysis (TGA), dynamic light scattering (DLS), field-emission scanning electron microscopy (FESEM) imaging, FESEM-energy dispersive X-ray spectroscopy (EDS), UV-vis absorption, and fluorescence emission spectroscopy. Bi₂Fe₄O₉ NPs were utilized to catalyze the oxidation of a typical chromogenic peroxidase substrate, 3,3',5,5'-tetramethylbenzidine (TMB), to form the blue-colored oxidized product (oxTMB), in the presence of hydrogen peroxide (H₂O₂). All reactions occurred in acetate buffer solution (pH 3.5) to generate hydroxyl radicals (^•OH) and the kinetics were followed by UV-vis absorbance at 654 nm. The steady-state kinetic parameters were obtained from the Michaelis-Menten equation and exhibited a good catalytic efficiency of Bi₂Fe₄O₉ NPs as enzyme mimetics. Michaelis-Menten constant (K_m) values were estimated as 0.07 and 0.73 mM for TMB and H₂O₂, respectively. The presented method is efficient, rapid, cost-effective, and sensitive for the colorimetric detection of dopamine with a linear range (LR) from 0.15 to 50 μM and a detection limit (LOD) of 51 nM. The proposed colorimetric sensor was successfully applied for the detection of different concentrations of dopamine in spiked fetal bovine serum (FBS) and horse serum (HS) samples. It is anticipated that Bi₂Fe₄O₉ nanozyme holds great potential in biomedical analysis and diagnostic applications of dopamine-related diseases.

Template-Regulated Bimetallic Sulfide Nanozymes with High Specificity and Activity for Visual Colorimetric Detection of Cellular H2O2

For the past several decades, most of the research studies on nanozymes have been aimed at improving their catalytic activity and diversity; however, developing nanozymes with strong catalytic activity and great specificity remains a challenge. Herein, a simple and efficient template synthesis method was used to synthesize bimetallic sulfide nanoparticles, NiCo₂S₄ NPs, and prove that they have excellent peroxidase-like activity with good specificity. By regulating polyvinyl pyrrolidone (PVP) and hexadecyl trimethyl ammonium bromide as the templating agent, we have obtained the NiCo₂S₄ (PVP) NPs with a high Ni/Co ratio, thus exhibiting superior peroxidase activity. In addition, the NiCo₂S₄ NPs selectively catalyzed and oxidized colorless 3,3,5,5-tetramethylbenzidine (TMB). On being treated with H₂O₂, TMB turns blue while other substrates did not undergo the oxidation reaction under the same conditions, such as 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium (ABTS) and dopamine. The high specificity of NiCo₂S₄ NPs is due to the strong electrostatic driving coordination between negatively charged NiCo₂S₄ NPs and positively charged TMB. Due to the peroxidase activity of the developed NiCo₂S₄ NPs, a simple, low-cost, and reliable colorimetric method was established. Simultaneously, this method for in situ quantitative monitoring of H₂O₂ produced by MDA-MB-231 cells was also achieved. This study has provided a theoretical basis for the improvement of the activity and specificity of bimetallic sulfide nanozymes and may offer guidance for the further reasonable design of related materials.

Recent progress in the design of analytical methods based on nanozymes

Nanomaterials with intrinsic enzyme-like properties (nanozymes) have attracted growing interest owing to their striking merits over the traditional enzymes, such as low cost, easy surface modification, high stability and robustness, and tunable activity. These features enable them to be considered as a potent substitute for natural enzymes to construct novel analytical platforms to detect various analytes from small molecules to proteins and cells. In this review, we focus on recent advances in the design strategies using nanozyme catalytic mediated signal amplification for sensing applications. The progress of nanozyme-based analytical systems in the detection of different types of analytes, including ions, small biomolecules, biomacromolecules and others, is summarized. Furthermore, the future challenges and opportunities of nanozyme-based analytical methods are discussed.

Fabrication of Bioresource-Derived Porous Carbon-Supported Iron as an Efficient Oxidase Mimic for Dual-Channel Biosensing

Herein, we designed a new strategy for fabricating a renewable bioresource-derived N-doped hierarchical porous carbon-supported iron (Fe/NPC)-based oxidase mimic. The obtained results suggested that Fe/NPC possessed a large specific surface area (1144 m²/g) and pore volume (0.62 cm³/g) to afford extensive Fe-Nx active sites. Taking advantages of the remarkable oxidase-mimicking activity, outstanding stability, and reusability of Fe/NPC, a novel dual-channel biosensing system was strategically fabricated for sensitively determining acetylcholinesterase (AChE) through the integration of Fe/NPC and fluorescent silver nanoclusters (AgNCs) for the first time. The limits of detection for AChE can achieve as low as 0.0032 and 0.0073 U/L by the outputting fluorometric and colorimetric dual signals, respectively. Additionally, this dual-signal system was applied to analyze human erythrocyte AChE and its inhibitor with robust analytical performance. This work provides one sustainable and effective avenue to apply a bioresource for fabricating an Fe/NPC-based oxidase mimic with high catalytic performance and also gives new impetuses for developing novel biosensors by applying Fe/NPC-based enzyme mimics as substitutes for the natural enzyme.

Nanozymes for Environmental Pollutant Monitoring and Remediation

Nanozymes are advanced nanomaterials which mimic natural enzymes by exhibiting enzyme-like properties. As nanozymes offer better structural stability over their respective natural enzymes, they are ideal candidates for real-time and/or remote environmental pollutant monitoring and remediation. In this review, we classify nanozymes into four types depending on their enzyme-mimicking behaviour (active metal centre mimic, functional mimic, nanocomposite or 3D structural mimic) and offer mechanistic insights into the nature of their catalytic activity. Following this, we discuss the current environmental translation of nanozymes into a powerful sensing or remediation tool through inventive nano-architectural design of nanozymes and their transduction methodologies. Here, we focus on recent developments in nanozymes for the detection of heavy metal ions, pesticides and other organic pollutants, emphasising optical methods and a few electrochemical techniques. Strategies to remediate persistent organic pollutants such as pesticides, phenols, antibiotics and textile dyes are included. We conclude with a discussion on the practical deployment of these nanozymes in terms of their effectiveness, reusability, real-time in-field application, commercial production and regulatory considerations.

Biomedical applications of metal–organic framework (MOF)-based nano-enzymes

In the present review, the types and activities of nanometer-sized enzymes are summarized, with recent progress of nanometer-sized enzymes in the field of biomedical detection.

N,N-dicarboxymethyl Perylene-diimide modified CeCoO3: Enhanced peroxidase activity, synergetic catalytic mechanism and glutathione colorimetric sensing

N,N-dicarboxymethyl Perylene-diimide (PDI) modified CeCoO₃ nanocomposites were prepared by a two-step method. After modification with PDI molecules, the obtained PDI-CeCoO₃ nanocomposites were demonstrated to possess the heightened peroxidase-like activity, compared with that of pure CeCoO₃ nanoparticles. In the presence of H₂O₂, the heightened peroxidase-like behaviors of PDI-CeCoO₃ were evaluated by the oxidation of the colorless substrate 3,3,5,5-tetramethylbenzidine (TMB) into blue oxTMB, which was detected visually only in 4 min. Importantly, a systematic study of catalytic activity of PDI-CeCoO₃ by different means, including fluorescent probe, electrochemical data, diffuse reflection spectra together with free radical scavenger is executed, verifying that the catalytic activity were from O₂^- and electron holes (h⁺). And, the transfer of photogenerated carriers in the PDI-CeCoO₃ was the Z-scheme heterojuntion mechanism. Furthermore, the peroxidase-like activity of PDI-CeCoO₃ was significantly inhibited by Glutathione (GSH), resulting in fading of blue oxTMB. Based on this, a colorimetric assay for GSH biosensing has been developed. And, the liner range for GSH detection is from 1 to 10 μM with a detection limit of 0.658 μM. The recovery of GSH with different concentrations from 90.0% to 105.9% and the relative standard deviation (RSD) from 1.9% to 5.1%. This colorimetric sensor can be used to detect GSH in real samples.

Interactions of Fe-N-S Co-Doped Porous Carbons with Bacteria: Sorption Effect and Enzyme-Like Properties

Carbon-based (nano)materials doped with transition metals, nitrogen and other heteroatoms are considered active heterogeneous catalysts in a wide range of chemical processes. Recently they have been scrutinized as artificial enzymes since they can catalyze proton-coupled electron transfer reactions vital for living organisms. Herein, interactions between Gram-positive and Gram-negative bacteria and either metal-free N and/or S doped or metal containing Fe-N-S co-doped porous carbons are studied. The Fe- and N-co-doped porous carbons (Fe-N-C) exhibit enhanced affinity toward bacteria as they show the highest adsorption capacity. Fe-N-C materials also show the strongest influence on the bacteria viability with visible toxic effect. Both types of bacteria studied reacted to the presence of Fe-doped carbons in a similar manner, showing a decrease in dehydrogenases activity in comparison to controls. The N-coordinated iron-doped carbons (Fe-N-C) may exhibit oxidase/peroxidase-like activity and activate O2 dissolved in the solution and/or oxygen-containing species released by the bacteria (e.g., H2O2) to yield highly bactericidal reactive oxygen species. As Fe/N/ and/or S-doped carbon materials efficiently adsorb bacteria exhibiting simultaneously antibacterial properties, they can be applied, inter alia, as microbiological filters with enhanced biofouling resistance.

Iron-Based Nanozymes in Disease Diagnosis and Treatment

Iron-based nanozymes are currently one of the few clinical inorganic nanoparticles for disease diagnosis and treatment. Overcoming the shortcomings of natural enzymes, such as easy inactivation and low yield, combined with their special nanometer properties and magnetic functions, iron-based nanozymes have broad prospects in biomedicine. This minireview summarizes their preparation, biological activity, catalytic mechanism, and applications in diagnosis and treatment of diseases. Finally, challenges to their future development and the trends of iron-based nanozymes are discussed. The purpose of this minireview is to better understand and reasonably speculate on the rational design of iron-based nanozymes as an increasingly important new paradigm for diagnostics.

CoSe2 hollow microspheres with superior oxidase-like activity for ultrasensitive colorimetric biosensing

As one of the transition metal dichalcogenide, CoSe₂ has received much attention because of its superior physicochemical properties. In this work, a self-templated approach was proposed for constructing CoSe₂ hollow microspheres by utilizing ZIF-67 hollow sphere as a template. In the followed selenylation process, selenium vapor reacts with cobalt ion in ZIF-67 to form CoSe₂ microspheres. The obtained CoSe₂ microspheres retain the cavity of the ZIF-67 and massive uniformly dispersed CoSe₂ nanoparticles are embedded throughout carbon walls. The hollow interior and porous structure of CoSe₂ microspheres provide an enhanced surface-volume ratio and short charge/mass transfer distance. The CoSe₂ microspheres show a typical oxidase-like property able to promote 3,3',5,5'-tetramethylbenzidine (TMB) oxidation by dissolved oxygen to produce an intensive color reaction. Reactive oxygen species trials demonstrate that ·OH, ¹O₂ and O₂^•- radicals coexist in the TMB-CoSe₂ system. Based on its inhibitive role, a rapid and ultrasensitive determination of glutathione was reached, showing four orders of magnitude linear range from 0.005 to 10 μM and a limit of detection of 4.62 nM (S/N = 3). The assay has been successfully used to glutathione determination in practical samples.

Zeolitic imidazolate frameworks for use in electrochemical and optical chemical sensing and biosensing: a review

This review (with 145 refs.) summarizes the progress that has been made in the use of zeolitic imidazolate frameworks in chemical sensing and biosensing. Zeolitic imidazolate frameworks (ZIFs) are a type of porous material with zeolite topological structure that combine the advantages of zeolite and traditional metal-organic frameworks. Owing to the structural flexibility of ZIFs, their pore sizes and surface functionalization can be reasonably designed. Following an introduction into the field of metal-organic frameworks and the zeolitic imidazolate framework (ZIF) subclass, a first large section covers the various kinds and properties of ZIFs. The next large section covers electrochemical sensors and assays (with subsections on methods for gases, electrochemiluminescence, electrochemical biomolecules). This is followed by main sections on ZIF-based colorimetric and luminescent sensors, with subsections on sensors for metal ions and anions, for gases, and for organic biomolecules. The last section covers SERS-based assays. Several tables are presented that give an overview on the wealth of methods and materials. A concluding section summarizes the current status, addresses current challenges, and gives an outlook on potential future trends. Graphical abstract In recent years, ZIFs and their composites have been widely used as probes in chemical sensing, and these probes have shown great advantages over other materials. This review describes the current progress on ZIFs toward electrochemical, luminescence, colorimetric, and SERS-based sensing applications, highlighting the different strategies for designing ZIFs and their composites and potential challenges in this field.

Oxidase-Like Fe-N-C Single-Atom Nanozymes for the Detection of Acetylcholinesterase Activity

Single-atom catalysts (SACs) have attracted extensive attention in the catalysis field because of their remarkable catalytic activity, gratifying stability, excellent selectivity, and 100% atom utilization. With atomically dispersed metal active sites, Fe-N-C SACs can mimic oxidase by activating O₂ into reactive oxygen species, O₂^- • radicals. Taking advantages of this property, single-atom nanozymes (SAzymes) can become a great impetus to develop novel biosensors. Herein, the performance of Fe-N-C SACs as oxidase-like nanozymes is explored. Besides, the Fe-N-C SAzymes are applied in biosensor areas to evaluate the activity of acetylcholinesterase based on the inhibition toward nanozyme activity by thiols. Moreover, this SAzymes-based biosensor is further used for monitoring the amounts of organophosphorus compounds.

Single-atom nanozymes

Conventional nanozyme technologies face formidable challenges of intricate size-, composition-, and facet-dependent catalysis and inherently low active site density. We discovered a new class of single-atom nanozymes with atomically dispersed enzyme-like active sites in nanomaterials, which significantly enhanced catalytic performance, and uncovered the underlying mechanism. With oxidase catalysis as a model reaction, experimental studies and theoretical calculations revealed that single-atom nanozymes with carbon nanoframe-confined FeN5 active centers (FeN5 SA/CNF) catalytically behaved like the axial ligand-coordinated heme of cytochrome P450. The definite active moieties and crucial synergistic effects endow FeN5 SA/CNF with a clear electron push-effect mechanism, as well as the highest oxidase-like activity among other nanozymes (the rate constant is 70 times higher than that of commercial Pt/C) and versatile antibacterial applications. These suggest that the single-atom nanozymes have great potential to become the next-generation nanozymes.

Catalytic Mechanisms of Nanozymes and Their Applications in Biomedicine

The research on nanozymes has increased dramatically in recent years and a new interdiscipline, nanozymology, has emerged. A variety of nanomaterials have been designed to mimic the characteristics of natural enzymes, which connects an important bridge between nanotechnology and biological science. Unlike natural enzymes, the nanoscale properties of nanozymes endow them with the potential to regulate their enzymatic-like activity from different perspectives. The mechanisms behind those methods are intriguing. In this Review, we introduce these mechanisms from the aspects of surface chemistry, surface modification, molecular imprinting, and hybridization and then focus attention on some specific catalytic mechanisms of several representative nanozymes. The applications of nanozymes ranging from bioassay, imaging, to disease therapy are also discussed in detail to prove the fact that the inherent physicochemical properties of nanomaterials not only make nanozymes the analogues of biological enzymes, but also endow them with incomparable advantages and broad prospects in biomedical fields. Finally, four characteristics and some challenges of nanozymes are summarized.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Yolk-Shell Fe/Fe4 N@Pd/C Magnetic Nanocomposite as an Efficient Recyclable ORR Electrocatalyst and SERS Substrate

A yolk-shell Fe/Fe₄ N@Pd/C (FFPC) nanocomposite is synthesized successfully by two facile steps: interfacial polymerization and annealing treatment. The concentration of Pd²⁺ is the key factor for the density of Pd nanoparticles (Pd NPs) embedded in the carbon shells, which plays a role in the oxygen reduction reaction (ORR) and surface-enhanced Raman scattering (SERS) properties. The ORR and SERS performances of FFPC nanocomposites under different concentrations of PdCl₂ are investigated. The optimal ORR performance exhibits that onset potential and tafel slope can reach 0.937 V (vs reversible hydrogen electrode (RHE)) and 74 mV dec^-1 , respectively, which is attributed to the synergistic effects of good electrical conductivity, large electrochemically active areas, and strong interfacial charge polarization. Off-axis electron holography reveals that interfacial charge polarization could facilitate the ORR of Pd NPs and defective carbon simultaneously and the shell with low density of Pd NPs is easier to form strong interfacial charge polarization. Moreover, FFPC-3 with maximum EF of 2.3 × 10⁵ results from more hot-spots, local positive charge centers to attract rhodamine 6G molecules, and magnetic cores. This work not only offers a recyclable multifunctional nanocomposite with excellent performance, but also has instructional implications for interfacial engineering for electrocatalysts design.

A colorimetric assay system for dopamine using microfluidic paper-based analytical devices

We report the colorimetric detection of dopamine (DA) on microfluidic paper-based analytical devices (μPADs) using an oxidation-reduction method. Here, dopamine reacts with ferric chloride forming reduced Fe²⁺ that subsequently reacts with phenanthroline to form the red tris(1,10-phenanthroline)iron(II) complex. The devices were fabricated by wax printing and changes in color intensity were recorded using a common cell phone. Subsequent analysis using Photoshop software, yielded a limit of detection (LOD) for DA of 0.37 μmol/L with a linear range of 0.527-4.75 μmol/L and relative standard deviation of 0.11% (inter-day) and 0.15% (intra-day) for n = 15 paper chips. The effects of detection conditions have been investigated and are discussed. Cow serum samples and human blood serum and plasma samples were detected. The work, herein, demonstrates the potential of this method as a low cost and rapid colorimetric technique to detect DA in real samples.

Oxidase-mimicking activity of perovskite LaMnO3+δ nanofibers and their application for colorimetric sensing

Excellent oxidase-like mimics based on the ABX₃-type perovskite structure and the corresponding sensitive colorimetric detection of l-cysteine have been developed.