Selective and sensitive fluorescent and colorimetric chemosensor for detection of CO32- anions in aqueous solution and living cells

Rational design of an isatin-based colorimetric and solvatochromic receptor for carbonate ions and its application in molecular-scale logic gates & memory units

A simple and highly sensitive isatin-based colorimetric sensor ISAT 3(a-d) was synthesized through a single-step reaction. The as-prepared receptor ISAT 3b with carbonate ions (CO32- ions) shows a significant red shift in the UV-visible absorption spectra and a visible color change from pale yellow to pink. Also, the receptor ISAT 3b shows unique solvatochromic behavior with CO32- ions in different aprotic solvents and solvent compositions. Moreover, the receptor's pink coloration (absorption maxima at 544 nm) with CO32- ions could be reversible by adding HSO4- ions (attain initial pale-yellow color, absorption maxima at 425 nm), which can be repeatable. The observed color changes with spectral shift and reversibility of the receptor with CO32- ions and HSO4- ions provide "ON-OFF" switching for applying molecular logic gates. Receptors exhibited properties, such as reversibility and repeatability, benefit the design of a molecular-scale sequential memory unit with a display of "Writing-Reading-Erasing-Reading". The real sample analysis was also carried out to prove the practical applicability of receptor (ISAT 3b) for detecting CO32- ions.

A portable optical sensor combining smartphone with phycocyanin-based fluorescent test paper for rapid, visual and on-site detection of CO32

With the development of global industry, carbon dioxide emissions surged. The conversion of carbon dioxide from the air results in some CO32-, which can exacerbate environmental disasters like ocean acidification. Therefore, the content of CO32- in seawater is an important indicator of the degree of ocean acidification. In this study, natural fluorescent protein phycocyanin (PC) was used as a fluorescent probe, and a fluorescence detection method was established for quantitative monitoring of CO32- with quick response time (within 50 s), high sensitivity, and selectivity. The fluorescence quenching phenomenon between PC and CO32- was mainly attributed to static quenching. The limit of detection (LOD) was 0.42 μM and the method was successfully applied to monitor CO32- in tap water and seawater, acquiring satisfactory recovery between 99.28 % and 106.40 %. More importantly, paper-based test strips were easily fabricated using PC, enabling the rapid, visual, and on-site detection of CO32- with the aid of a smartphone. The visual detection integrated with the smartphone was converted to data information (RGB value) through a Color Picker APP and successfully used for quantitative identification of CO32-. By capturing fluorescent images and analyzing the corresponding RGB value via a smartphone, the linear calibration ranged from 0.5 μM to 500.0 μM with LOD of 0.11 μM was obtained. Satisfactory recoveries were acquired in tap water (98.00 %-107.50 %) and seawater (97.30 %-101.74 %), respectively. Therefore, integrating the PC fluorescent paper with a smartphone realizes the rapid, visual, and on-site detection of CO32- in the water environment, which is expected to broaden application prospects of monitoring ocean acidification degree.

Phenolate-thiazole based reversible "turn-on" chemosensor for the selective detection of carbonate anion: X-ray crystallography, DFT/TDFT, and cell study

A new phenolate-thiazole derivative (L) has been synthesized and structurally characterized.The chemo-sensing activity of L is detected by the naked eye for the aqueous carbonate anion in the pH range of 4 to 8. The selective 'turn-on' fluorescence occurs through the formation of a stable intermediate L∙CO32-(1) following the PET mechanism. The limit of detection (LOD) is found 0.18 µM based on the absorbance-based assay.The quinonoid form of bromophenol unit binds strongly with CO32- through thiazole nitrogen and hydrazinic nitrogen. Further, the selective holding of CO32- anion over other planar tetranuclear anions (e.g., SO32-, NO3-) happens with several intra and intermolecular hydrogen bonds as envisaged by the DFT/TDFT study. The formation mechanism of L∙CO32- is proposed based on experimental and theoretical studies. The biological experiments (MTT and cell imaging)reveal the non-cytotoxicity nature of L and the biocompatible uptake of L mostly in the cytoplasm at physiological pH.

Fluorescence switchable sensor enabled by a calix[4]arene-Cu(II) complex system for selective determination of itraconazole in human serum and aqueous solution

A switchable fluorescence sensor based on a calix (Monapathi et al., 2021) [4]arene:Cu²⁺ complex (FLCX/Cu) has been developed for the detection of itraconazole (ITZ) with high sensitivity and specificity. For the development of the sensor, the selective complexation of a fluorescent calix (Monapathi et al., 2021) [4]arene derivative (FL-CX) with the Cu²⁺ ion causing fluorescence quenching was utilized. In addition, the sensor properties of the FLCX/Cu prepared were investigated. For this purpose, various substances (selected anions, cations, and drugs) with which ITZ can be found together were studied in an aqueous solution. Limit of detection (LOD) and limit of quantification (LOQ) values were determined in the range of 1.00-60.0 μg/L as 3.34 μg/L and 11.1 μg/L for ITZ, respectively. Moreover, the real sample analyses were performed in human serum and tablet form. Furthermore, the effect of some possible serum contents on sensor performance was also studied. All these studies confirmed the development of a simple, precise, accurate, reproducible, highly sensitive, and very stable fluorescence sensor.

3-Phenylcoumarins as a Privileged Scaffold in Medicinal Chemistry: The Landmarks of the Past Decade

3-Phenylcoumarins are a family of heterocyclic molecules that are widely used in both organic and medicinal chemistry. In this overview, research on this scaffold, since 2010, is included and discussed, focusing on aspects related to its natural origin, synthetic procedures and pharmacological applications. This review paper is based on the most relevant literature related to the role of 3-phenylcoumarins in the design of new drug candidates. The references presented in this review have been collected from multiple electronic databases, including SciFinder, Pubmed and Mendeley.

Fluorescein Based Three-channel Probe for the Selective and Sensitive Detection of CO32- Ions in an Aqueous Environment and Real Water Samples

We have constructed a novel fluorescein-based fluorescent chemosensor, FL-In, functionalised with an indole moiety and capable of sensing by both the optical "turn-on" and electrochemical detection of carbonate ions (CO₃^2-) in aqueous media. The probe exhibits excellent selectivity and a low detection limit (0.27 µM) regarding carbonate ions by a possible coordination and hydrolysis reaction mechanism. The developed probe successfully detected CO₃^2- ions in different samples of water. Also, in a simple filter paper experiment, we documented its ability to allow the monitoring of CO₃^2- with the naked eye.

Selective, pH sensitive, "turn on" fluorescence sensing of carbonate ions by a benzimidazole

Anions play crucial roles in the sustenance of life on earth in many ways. Selective detection of specific anions is important in developing new diagnostic tools and therapeutics. A pH-sensitive & selective benzimidazole-based fluorescent sensor has been developed for rapid detection of carbonate ions which can detect carbonate ions in low nanomolar concentrations. NMR based experiments indicate direct interaction of benzimidazole imino protons with the carbonate ions leading to 1:1 ligand carbonate ion complexation events. This is one of the first reports of benzimidazole sensing carbonate ions with high selectivity which may have implications in disease prevention and toxicity assessment.

Fabrication and sensing properties of phenolphthalein based colorimetric and turn-on fluorogenic probe for CO32- detection and its living-cell imaging application

Herein, an easy assembled colorimetric and ''turn-on'' fluorescent sensor (probe P4SC) based on phenolphthalein was developed for carbonate ion (CO₃^2-) sensing in a mixture of EtOH/H₂O (v/v, 80/20, pH = 7, Britton-Robinson buffer) media. The probe P4SC demonstrated high sensitive and selective monitoring toward CO₃^2- over other competitive anions. Interaction of CO₃^2- with the probe P4SC resulted in a significant increment in emission intensity at λ_em = 498 nm (λ_ex = 384 nm) due to the strategy of blocking the photo induced electron transfer (PET) mechanism. ¹H NMR titration and Job's methods, as well as the theoretical study were carried out to support the probable stoichiometry of the reaction (1:2) between P4SC and CO₃^2-. The binding constant of the probe P4SC with CO₃^2- was calculated as 2.56 × 10¹⁰ M^-2. The probe P4SC providing rapid response time (~0.5 min) with a satisfactorily low detection limit (14.7 nM) may be useful as a valuable realistic sensor. The imaging studies on the liver cancer cells (HepG2) shows the great potential of the probe P4SC for the sensation of intracellular CO₃^2- anions. Furthermore, the satisfactory recovery and RSD values obtained for water application confirming that the probe P4SC could be applied to sensing of CO₃^2- ion.

A novel voltammetric method for the sensitive and selective determination of carbonate or bicarbonate ions by an azomethine-H probe

Our study involved a simple, sensitive voltammetric method of determining either carbonate or bicarbonate ions independently with azomethine-H and a disposable pencil graphite electrode. The reduction of azomethine-H-carbonate complexes at approximately -930 mV formed in acetic acid-acetate buffer solution (pH: 4.25) was evaluated as a response. Among the results, the limits of detection and analytical ranges for carbonate ions were 3.7 μg L^-1 and 9.9-700.0 μg L^-1 and for bicarbonate ions were 9.0 μg L^-1 and 35.0-700.0 μg L^-1, and the relative standard deviations for carbonate and bicarbonate ions ranged from 1.33% and 6.93% at different concentrations. After the proposed method was applied to water, sparkling water, seawater and baking powder samples, the results were statistically evaluated and compared with those obtained from the potentiometric auto-titration system. Last, the complex stoichiometry of both carbonate and bicarbonate ions was comprehensively investigated with fluorescence and ¹H-NMR spectroscopy.

Lansoprazole-Based Colorimetric Chemosensor for Efficient Binding and Sensing of Carbonate Ion: Spectroscopy and DFT Studies

The new benzimidazole based receptor Lansoprazole has been used to detect carbonate anion by naked-eye and Uv-Vis spectroscopy. This receptor revealed visual changes withCO 3 2 - anion in ethanol. No detectable color changes were observed upon the addition of any other tested anions. The lansoprazole chemosensor selectively recognizesCO 3 2 - ion over the other interference anions in the ethanol, followed by deprotonation and reflected 1:1 complex formation between the receptor and the carbonate ion. Lansoprazole exhibits splendid selectivity toward carbonate ion via a visible color change from colorless to yellow with a detection limit of 57 μM. The binding mode ofCO 3 2 - to receptor L is supported by Density Functional Theory calculation. Moreover, this receptor shows a practical visible colorimetric test strip for the detection of carbonate ions. The transition states calculation demonstrates the occurrence of reaction from L to L-CO 3 2 - after overcoming an energy barrier of 10.1 kcal/mol, and there is considerable interaction energy between L andCO 3 2 - (94.9 kJ/mol), both of which confirmed that receptor L has high sensitivity and selectivity to the carbonate ion. The theoretical studies were performed to acquire an electronic description of the complexation mechanism byCO 3 2 - as well as to study bonding and structure in the complex. The optimized structures and binding mechanisms were supported with a high correlation and agreement by spectroscopy and DFT calculations.

Fluorescent sensing platform for low-cost detection of Cu2+ by coumarin derivative: DFT calculation and practical application in herbal and black tea samples

A fluorogenic probe based on a coumarin-derivative for Cu2+ sensing in CH3CN/H2O media (v/v, 95/5, 5.0 μM) was developed and applied in real samples. 3-(4-chlorophenyl)-6,7-dihydroxy-coumarin (MCPC) probe was obtained by synthetic methodologies and identified by spectral techniques. The probe MCPC showed remarkable changes with a "turn-off" fluorogenic sensing approach for the monitoring of Cu2+ at 456 nm under an excitation wavelength of 366 nm. The response time of the probe MCPC was founded as only 1 min. The detection limit of the probe MCPC was recorded to be 1.47 nM. The binding constant and possible stoichiometric ratio (1:1) values were determined by Benesi-Hildebrand and Job's plot systems, respectively. The mechanism of the probe MCPC with Cu2+ was further confirmed by ESI-MS and FT-IR analyses, as well as supported by theoretical calculations. Furthermore, the probe MCPC was successfully employed for the practical applications to sense Cu2+ in different herbal and black tea samples. The proposed sensing method was also verified by ICP-OES method.

Cellulose-based fluorescent sensor for visual and versatile detection of amines and anions

It is practical and challenging to construct ultrasensitive and multi-responsive sensors for visual and real-time monitoring of the environment. Herein, a cellulose-based multi-responsive fluorescent sensor (Phen-MDI-CA) is fabricated, and realizes a visual and ultrasensitive detection of not only various amines but also three anions based on the change of the fluorescence and/or visible colors. Once exposure to various amines in both the solution and vapor state, the Phen-MDI-CA solution and test paper exhibit different fluorescence colors, which can be used to distinguish triethylamine, ethylenediamine, methylamine, aniline, hydrazine and pyrrolidine from other amines. Moreover, via combining the Phen-MDI-CA with the Phen-MDI-CA/malachite green ratiometric system, phosphate (PO₄^3-), carbonate (CO₃^2-) and borate (B₄O₇^2-) can be visually and accurately recognized depending on the change of the visible and fluorescence colors. In fluorescent mode, the LOD for B₄O₇^2-, PO₄^3- and CO₃^2- ions is as low as 0.18 nmol, 0.69 nmol and 0.86 nmol, respectively. Significantly, the Phen-MDI-CA can readily make a qualitative and quantitative detection of B₄O₇^2-, PO₄^3- and CO₃^2- anions in the mixture of anions. The state-of-the-art responsive behavior of Phen-MDI-CA originates from the amplification effect of cellulose polymer chain and the differentiated interactions between the sensor and analytes.

Fluorescence "Turn On-Off" Sensing of Copper (II) Ions Utilizing Coumarin-Based Chemosensor: Experimental Study, Theoretical Calculation, Mineral and Drinking Water Analysis

Herein, we report the preparation of a fluorescent sensor based on coumarin derivative for copper (II) ion sensing in CH₃CN/HEPES media. 6,7-dihydroxy-3-(4-(trifluoro)methylphenyl)coumarin (HMAC) sensor was fabricated and analyzed by spectroscopic techniques. The sensor demonstrates "turn on-off" fluorescence quenching in the presence of copper (II) ions at 458 nm. A clear complex between the chemosensor HMAC and copper (II) ions was characterized by ESI-MS as well as the Job's method. Also, the limit of detection (LOD, 3σ/k) value was determined as 24.5 nM in CH₃CN/HEPES (95/5, v/v) buffer media (pH = 7.0). This value is lower than the admissible level of copper (II) ions in drinking water (maximum 31.5 μM) reported by EU Water Framework Directive (WFD) and World Health Organization (WHO) guidelines. The theoretical calculations (density functional theory, DFT) have been performed for the geometric optimized structures. As a final stage, real sample analyses have successfully been performed by using HMAC, as well as ICP-OES method. The relative standard deviation for copper (II) in mineral and drinking water samples has been determined to be below 0.15% and recovery values are in the range of 95.48-109.20%.

A novel fluorescent probe based on isocoumarin for Hg2+ and Fe3+ ions and its application in live-cell imaging

Synthesis of the 2-amino-4-phenyl-6- (isocoumarin-3-yl) -3-cyanopyridine (APICP) containing both isocoumarin and pyridine ring in its structure was carried out, and this compound was characterized by ATR-FTIR, ¹H NMR, and ¹³C NMR spectral techniques. A fluorescence sensor determining Hg²⁺ and Fe³⁺ ions in DMSO/HEPES buffer solution (9/1 v/v, 5 μM, pH 7.0) was developed using the synthesized compound, and the detection limits of the sensor with exquisite selectivity were calculated as 8.12 nM and 5.51 nM for Hg²⁺ and Fe³⁺ ions, respectively. Jobs plot method was used to determine the stoichiometry of APICP-Hg²⁺/Fe³⁺ complexes as 2:1 and FT-IR and ESI-MS methods confirmed the results. Besides, cell growth inhibitory potentials of the sensor over HepG2 cells and in vivo fluorescent cell imaging experiments were conducted. Findings revealed the relatively low cytotoxic effects of the synthesized sensor (IC₅₀: 0.541 ± 0.039 mM), and it could be utilized as an intracellular imaging agent for the determination of Fe³⁺ and Hg²⁺ ions in biological systems.

π-Conjugated molecules identified for reversible and visual detection of F- in aqueous: Effect of heterocycle unit on sensing performance

To illustrate the impact of molecular structure, especially heterocycle unit, on the sensing performance, two kinds of π-conjugated molecules containing aromatic heterocyclic (Dye 1) and aromatic ring (Dye 2) were identified and compared each other. Even with similar structures, they possessed quite different spectral and colorimetric responses to F^-, Cl^-, Br^-, I^-, NO₃^-, HSO₄^-, H₂PO₄^-, ClO₄^- and CH₃COO^-, etc. The reason might result from the difference in withdraw-electron ability of aromatic and heterocyclic rings, which would lead to different acidity of active H in the target π-conjugated molecules. In acidic aqueous, Dye 1 expressed a reversible ratiometric-colorimetric response to F^-, accompanying with a visual color change from bright yellow to purple, a nice linear range of 2.0-35.0 × 10^-6 mol/L and a low detection limit of 1.60 × 10^-7 mol/L. While Dye 2 did not react with any anion due to its weak acidity of active hydrogen. Under the optimized conditions, Dye 1 was successfully applied for colorimetric or naked-eye detection of F^- in environmental water, tea and toothpaste samples with RSD ≤ 3.1%. The recognition mechanism for Dye 1 to F^- was confirmed to be deprotonation one with a 1:1 binding stoichiometry.

A simple and sensitive fluorescent sensor platform for Al3+ sensing in aqueous media and monitoring through combined PET and ESIPT mechanisms: practical applications in drinking water and bio-imaging

A novel hydrazide-based probe was designed and prepared as a fluorogenic “turn-on” sensor for Al³⁺ sensing in aqueous media.

Direct and sensitive detection of sulfide ions based on one-step synthesis of ionic liquid functionalized fluorescent carbon nanoribbons

Despite widely reported fluorescence sensors for cations, direct detection of anions is nevertheless still rare. In this work, ionic liquid-functionalized fluorescent carbon nanoribbons (IL-CNRs) are one-step synthesized and serve as the fluorescent probes for direct and sensitive detection of sulfide ions (S²⁻). The IL-CNRs are synthesized based on electrochemical exfoliation of graphite rods in a water-IL biphasic system. The as-prepared IL-CNRs exhibit uniform structure, high crystallinity, strong blue fluorescence (absolute photoluminescence quantum yield of 11.4%), and unique selectivity towards S²⁻. Based on the fluorescence quenching of IL-CNRs by S²⁻, a fluorescence sensor is developed for direct, rapid and sensitive detection of S²⁻ in the range of 100 nM to 1 μM and 1–300 μM with a low detection limit (LOD, 85 nM). Moreover, detection of S²⁻ in a real sample (tap water) is also demonstrated.

Sensitive detection of sulfide ions is realized based on one-step synthesis of ionic liquid functionalized fluorescent carbon nanoribbons.