Dispersive solid-phase extraction with tannic acid functionalized graphene adsorbent for the preconcentration of trace beryllium from water and street dust samples

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite as an effective adsorbent for dispersive solid phase micro-extraction of cadmium in food and water samples

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite (NMC-TSO) was synthesized. It was utilized as an efficient sorbent for the dispersive solid phase microextraction (D-SPμE) without vortexing of cadmium. The analysis of the cadmium was carried out by FAAS. The effective analytical parameters including pH (6) contact times (no vortexing), sample volume (70 mL), eluent volume (3 mL of 2 mol L-1 HCl), linear dynamic ranges (1.07-85.7 μg L-1), and re-useability (33) on the D-SPμE efficiency were investigated. The PF, RSD% and LOD of the D-SPμE for cadmium were 23.3, ≤ 2.8% and 0.49 μg L-1, respectively. The tolerable concentrations of Ca2+, Mg2+, K+ and Na+ on Cd(II) were 50,000 mg L-1, 50,000 mg L-1, 25,000 mg L-1 and 7500 mg L-1, respectively. The method was accurated by analysis of food and water certificate reference materials (NW-TMDA-54.6 Lake water, SPS-WW1 121 Batch wastewater, 1573a Tomato Leaves and TORT-3 Lobster Hepatopancreas) and - recovery experiments. The D-SPμE-FAAS method was applied for the cadmium determination in dam water, wastewater, river water, well water, sea water, tea, cacao, nut, bitter chocolate, rice, leek, cinnamon and parsley.

Dispersive Solid-phase Microextraction of Lead in Waters and Edible Lettuce and Dill Extracts in the Unified Bioaccessibility Method (UBM) Saliva Solution

A new thiosemicarbazide-modified, sulfonamide-based poly (styrene) adsorbent (T-CSPS) was prepared starting from the reaction of chlorosulfonated polystyrene and thiosemicarbazide. It was characterized by SEM-EDX, FT-IR, and zeta potential. The T-CSPS was used as an adsorbent for the first time for the dispersive solid-phase microextraction (d-SPµE) and preconcentration of Pb(II) ions from waters and dill and lettuce extracts in the unified bioaccessibility method (UBM) saliva. Lead was then determined using the FAAS. In the first step of optimization, the solution pH was changed from 2 to 8, and pH 4 with a recovery value of 103% ± 5 was selected. Two milliliters of 2 mol L-1 HCl was chosen as eluent. Contact times were found to be only 2 min. Effects of coexisting ions and sample volume were tested. Under optimal conditions, the preconcentration factor (PF) and the adsorption capacity were 15 and 40 mg g-1. The RSD% was 2.2% and 3.1% for intra-day and inter-day precision, respectively. The LOD and LOQ were found to be 5.1 µg L-1 and 16.9 µg L-1, respectively. The accuracy of the d-SPµE was checked by TMDA-70.2 Lake water and BCR-482 Lichen-certified reference materials and also applying d-SPµE to spiked waters and lettuce and dill extracts in UBM saliva.

A zirconium metal-organic framework functionalized with a S/N containing carboxylic acid (MOF-808(Zr)-Tz) as an efficient sorbent for the ultrafast and selective dispersive solid phase micro extraction of chromium, silver, and rhodium in water samples

Metal-organic frameworks (MOFs) are good adsorbents for targeted chemicals with their adjustable properties. Herein, we prepared a zirconium based MOF (MOF-808(Zr)) and functionalized it employing 2-mercapto-4-methyl-5-thiazolacetic acid (MOF-808(Zr)-Tz). The prepared MOFs were characterized by XRD, FTIR, SEM-EDX, TGA, N2 sorption, zeta potential measurements, and elemental analysis. The surface area of MOF-808(Zr)-Tz was 1348 m2/g. Dispersive solid-phase micro-extraction (D-SPµE) method based on MOF-808(Zr)-Tz was firstly developed and applied to the extraction of chromium, silver, and rhodium in waters. The determination of the analytes was done by FAAS. The optimal pH and eluent for analytes were 7.0 and 3 mL of 2 mol L-1 HCl, respectively. The contact times were 1 min for adsorption and 3 min for elution. The LOD and PFs of the D-SPμE for analytes were 2.3 μg L-1 and 13.3 for chromium, 2.1 μg L-1 and 13.3 for silver, and 3.1 μg L-1 and 13.3 rhodium, respectively. The D-SPμE method was verified with analyses of NW-TMDA-54.6 Lake water and SPS-WW1 Batch 114 Wastewater and with spiked dam water, river water, well water, sea water, and wastewater. The recoveries of the analytes changed from 89 to 108 %. The results indicated that the method is selective, simple, effective, and rapid for extracting chromium(III), silver(I) and rhodium(III) in waters.

Environmentally friendly nanoflower Al2O3@carbon spheres as adsorbent for dispersive solid-phase microextraction of copper and lead in food and water samples

A fast and simple dispersive solid-phase microextraction method (d-SPμE) was described for the determination of copper and lead in food, water, and sediments using FAAS. Firstly, nanoflower Al2O3@carbon spheres composite (NF Al2O3@CSs) was synthesized and then characterized. The obtained NF Al2O3@CSs was used for the d-SPμE of copper and lead in aqueous solutions. The influence of important parameters like pH, contact time, eluent conditions, volume of sample, and competing ion effects on the d-SPμE efficiency of copper and lead was investigated. They were pH, 7; eluent, 2 mol L-1 HCl (2 mL); sample volume, 250 mL for copper and 150 mL for lead with recoveries ≥90%. The adsorption and elution of analytes on NF Al2O3@CSs were realized quickly without vortexing. The LODs of the d-SPμE for copper and lead were found to be 0.69 μg L-1 and 2.8 μg L-1, respectively, while its PF was 125 for copper and 75 for lead. The intra-day precision and inter-day repeatability (RSD%, n = 7) were 1.3% and 1.6% for Cu(II) and 2.3% and 3.2% for Pb(II), respectively. Finally, the accuracy of the d-SPμE was investigated by determination of the analytes in four certified reference materials (TMDA-53.3 Lake water, NW-TMDA-54.6 Lake water, NIST 1573a Tomato leaves, and NIST RM 8704 Buffalo River Sediment). The analyte recoveries together with analyses of dam water, river water, wastewater, sea water, sumac, tea, chocolate, and lentils were studied. The results indicate that recoveries ranged from 90 to 103% in water samples and 91 to 110% in food samples.

Highly defective copper-based metal-organic frameworks for the efficient adsorption and detection of organophosphorus pesticides: An experimental and computational investigation

Organophosphorus pesticide (OP) residues pose a serious threat to human health, motivating the search for novel adsorbents and detection methods. Herein, defective copper-based metal organic frameworks (Cu-MOFs) were synthesized by the reaction of Cu²⁺ ions and 1,3,5-benzenetricarboxylate linkers in the presence of acetic acid. As the amount of acetic acid increased, the crystallization kinetics and morphology of the Cu-MOFs changed, leading to mesoporous Cu-MOFs with many large surface pores (defects). Adsorption studies of OPs revealed the defective Cu-MOFs showed faster pesticide adsorption kinetics and higher pesticide adsorption capacities. Density functional theory calculations showed that pesticide adsorption in the Cu-MOFs was mainly electrostatic. A dispersive solid phase extraction method was developed based on a defective Cu-MOF-6 for rapidly extracting pesticides from food samples. The method allowed pesticide detection over a wide linear concentration range, low limits of detection (0.0067-0.0164 µg L^-1) and good recoveries in pesticide-spiked samples (81.03-109.55%).

Beryllium contamination and its risk management in terrestrial and aquatic environmental settings

Beryllium (Be) is a relatively rare element and occurs naturally in the Earth's crust, in coal, and in various minerals. Beryllium is used as an alloy with other metals in aerospace, electronics and mechanical industries. The major emission sources to the atmosphere are the combustion of coal and fossil fuels and the incineration of municipal solid waste. In soils and natural waters, the majority of Be is sorbed to soil particles and sediments. The majority of contamination occurs through atmospheric deposition of Be on aboveground plant parts. Beryllium and its compounds are toxic to humans and are grouped as carcinogens. The general public is exposed to Be through inhalation of air and the consumption of Be-contaminated food and drinking water. Immobilization of Be in soil and groundwater using organic and inorganic amendments reduces the bioavailability and mobility of Be, thereby limiting the transfer into the food chain. Mobilization of Be in soil using chelating agents facilitates their removal through soil washing and plant uptake. This review provides an overview of the current understanding of the sources, geochemistry, health hazards, remediation practices, and current regulatory mandates of Be contamination in complex environmental settings, including soil and aquatic ecosystems.

A new highly Selective, sensitive and NIR spectrophotometric probe based on A2B2-Type of unsymmetrical phthalocyanine for hazardous Be2+ recognition

The aim of this work is to construct a new A₂B₂-type of unsymmetrical and ratiometric phthalocyanine (Pc) based-probe O-A₂B₂ZnPc to provide an effective solution to critical inadequacy to be experienced for the detection of hazardous Be²⁺. O-A₂B₂ZnPc enabling strong absorption and emission in Near-Infrared region (λ_abs-λ_em wavelengths of 694-712 nm) showed excellent selectivity and sensitivity toward Be²⁺ among competitive metal ions by both spectrophotometric and fluorometric methods. The probe with oligomeric Pc form in THF was degraded with the addition of aqueous Be²⁺ and arranged to J-aggregation form, resulting in a remarkably diminishing in Q-band at 694 nm as well as a new band formation at 746 nm, and a considerably decreasing in fluorescence emission. The probe has superior features for the determination of Be²⁺ such as high quantum efficiency and photochemical stability, rapid response (1 s), high selectivity and very low Limit of Detection (0.26 ppb and 1.5 ppb) for UV-Vis and fluorescence, respectively which are quite good values according to the permissible amount of Be²⁺ (4 ppb) in water as specified by World Health Organization. O-A₂B₂ZnPc can be shown among the best performing probes with its unique properties according to previous studies in the literature. In addition, the geometrical and spectral features of the O-A₂B₂ZnPc were analyzed in detail by DFT calculations.

Application of Carbonic Nanosheets Based on Urea Precursors as Dispersive Solid Phase Extraction Adsorbent for Extraction of Methamphetamine from Urine Samples

Purpose: This paper established the application of synthesized graphitic carbon nitride nanosheets (GCNNs) as an influential dispersive solid phase extraction (DSPE) adsorbent in extracting methamphetamine from complicated urine media coupled with high performance liquid chromatography.

Methods: The graphitic carbon nitride nanosheets (GCNNs) was synthesized easily and applied as adsorbent in the extraction process. The effective extraction parameters were investigated by one-parameter-at-a-time. Under optimized conditions the method was validated.

Results: The calibration curve was plotted in the concentration range of 50-1500 ng/mL through the optimized conditions and the proposed method was validated. The method was used for the analysis of positive urine samples and showed satisfactory results with the average 99.7% relative recovery.

Conclusion: The results persuade the capability of this novel method in analyzing of the positive urine samples in diverse clinical and forensic laboratories.

Insights into the adsorption mechanism of tannic acid by a green synthesized nano-hydroxyapatite and its effect on aqueous Cu(II) removal

The polyphenolic tannic acid (TA) has been widely used in the stabilization and surface modification of nanomaterials. The interaction mechanism of TA with the biogenic nano-hydroxyapatite (nHAP) and its environmental importance, however, are poorly understood. This study explored the adsorption of TA using the green synthesized, eggshell-derived nHAP and implications of this process for the removal of aqueous Cu(II) via batch adsorption experiments, Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) investigations. TA adsorption by nHAP was a complex pH-dependent process and significantly correlated with TA molecule speciation and amphoteric properties of nHAP via multiple adsorption modes including surface complexation, electrostatic attraction, and hydrogen bond. The maximum TA adsorption amount was found to be 94.8 mg/g for less crystalline nHAP with lower calcination temperature. In the ternary Cu-TA-nHAP systems, TA promoted Cu(II) adsorption at pH < 5 and reduced Cu(II) uptake at pH > 5. Further studies of the effects of ionic strength and addition sequences, as well as Raman, FTIR, and XPS analyses revealed Cu(II) adsorption on nHAP was mainly dominated by inner-sphere surface complexation. These results can shed light on not only the utility of biogenic nHAP for TA and Cu(II) adsorption but also the evaluation of the effect of TA on the environmental behavior of heavy metals.

Application of magnetic ion imprinted polymers for simultaneous quantification of Al3+ and Be2+ ions using the mean centering of ratio spectra method

Magnetic solid-phase extraction (MSPE) coupled with the spectrophotometric method for the simultaneous quantification of aluminum and beryllium ions based on mean centering of ratio (MCR) method is reported in the current work, for the first time. Two new magnetic ion-imprinted polymers (MIIPs) were synthesized using Chrome Azurol S as the ligand, (3-aminopropyl)triethoxysilane (APTES) as the functional monomer, tetraethyl orthosilicate (TEOS) as the cross-linker, and aluminum and beryllium ions as the templates, and used as magnetic sorbents. The characteristic properties of MIIPs were investigated using FT-IR spectroscopy, field emission scanning electron microscopy (FE-SEM), low angle X-ray powder diffraction (XRD), and energy-dispersive x-ray spectroscopy (EDS). Through this study, factors influencing the MSPE were studied and optimized. The proposed method exhibited good performance, with the linearity of 5.0-50.0 ng mL^-1 for aluminum ion and 2.0-40.0 ng mL^-1 for beryllium ion as well as the detection limits (DLs) of 3.2 and 0.9 ng mL^-1 for aluminum and beryllium ions, respectively. At the end of the study, the capability of the developed method for determination of target analytes was evaluated by its application in the tap and river water samples.

Preparation of polyacrylonitrile/polyindole conducting polymer composite and its use for solid phase extraction of copper in a certified reference material

A polyacrylonitrile/polyindole (PAN/PIN) [50, 50] conducting polymer composite was chemically synthesized using FeCl₃ as an oxidizing agent in chloroform solution and nitrogen atmosphere at 10 °C. The formation of the composite was supported by Fourier transform infrared spectroscopy. The morphological properties of the composite were investigated by atomic force microscopy and scanning electron microscopy. The thermal properties of the composite were examined by using thermogravimetric analyses. It was found that the composite had good thermal stability. The conducting polymer composite was used for the first time as an adsorbent for solid phase extraction of Cu (II). The optimum pH was found to be 7. The adsorption and elution shaking times were 5 and 15 min, respectively. The elution was done with 5 mL of 2 mol L^-1 HNO₃. The accuracy of the developed method was confirmed by analyzing certified reference material (TMDA-70.2 Lake Water).

Selective extraction and determination of beryllium in real samples using amino-5,8-dihydroxy-1,4-naphthoquinone functionalized magnetic MIL-53 as a novel nanoadsorbent

Herein, a magnetic MOF for preconcentration of Be(ii) was synthesized. The material is obtained from magnetite (Fe3O4) nanoparticles that were modified with 2-amino-5,8-dihydroxy-1,4-naphthoquinone (ADHNQ) and then reacted with terephthalic acid and iron(iii) chloride to form a metal-organic framework of the type MIL-53(Fe) capable of extracting Be(ii). The extraction parameters were optimized by employing design of experiments methodology. Beryllium concentration was determined by flame atomic absorption spectrometry (FAAS). The detection limit was as low as 0.07 ng mL-1 and the quantification limit is 0.2 ng mL-1. Linearity extends from 0.2 to 100 ng mL-1, and the precision of the method (intra and inter-day assay) is <9.5%. The recoveries of real sample analysis were in the range of 89-101%. The method was successfully applied to the analysis of various real water samples and an alloy sample.

The Current Role of Graphene-Based Nanomaterials in the Sample Preparation Arena

Since its discovery in 2004 by Novoselov et al., graphene has attracted increasing attention in the scientific community due to its excellent physical and chemical properties, such as thermal/mechanical resistance, electronic stability, high Young's modulus, and fast mobility of charged atoms. In addition, other remarkable characteristics support its use in analytical chemistry, especially as sorbent. For these reasons, graphene-based materials (GBMs) have been used as a promising material in sample preparation. Graphene and graphene oxide, owing to their excellent physical and chemical properties as a large surface area, good mechanical strength, thermal stability, and delocalized π-electrons, are ideal sorbents, especially for molecules containing aromatic rings. They have been used in several sample preparation techniques such as solid-phase extraction (SPE), stir bar sorptive extraction (SBSE), magnetic solid-phase extraction (MSPE), as well as in miniaturized modes as solid-phase microextraction (SPME) in their different configurations. However, the reduced size and weight of graphene sheets can limit their use since they commonly aggregate to each other, causing clogging in high-pressure extractive devices. One way to overcome it and other drawbacks consists of covalently attaching the graphene sheets to support materials (e.g., silica, polymers, and magnetically modified supports). Also, graphene-based materials can be further chemically modified to favor some interactions with specific analytes, resulting in more efficient hybrid sorbents with higher selectivity for specific chemical classes. As a result of this wide variety of graphene-based sorbents, several studies have shown the current potential of applying GBMs in different fields such as food, biological, pharmaceutical, and environmental applications. Within such a context, this review will focus on the last five years of achievements in graphene-based materials for sample preparation techniques highlighting their synthesis, chemical structure, and potential application for the extraction of target analytes in different complex matrices.

Determination of color additive tartrazine (E 102) in food samples after dispersive solid phase extraction with a zirconium-based metal-organic framework (UiO-66(Zr)-(COOH)2)

A new and rapid dispersive solid phase extraction method by using a green-synthesised UiO-66(Zr)-(COOH)₂ (Zr-BTeC) adsorbent with body-centred cubic (bcu) topology was developed for determination of tartrazine in food samples. Zr-BTeC was used for the first time as an adsorbent for tartrazine. It was synthesised and characterised by X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, Brunauer-Emmett-Teller surface area analysis, and zeta potential measurements. Tartrazine was determined at 405 nm spectrophotometrically. Experimental conditions were optimised in order to achieve quantitative recoveries. The sample acidity was found to be 0.02 mol L^-1 HCl. The amount of Zr-BTeC was 10 mg. Both adsorption and elution contact times were only 5 s without the need for vortexing. Elution was with 2 mL of 0.5 mol L^-1 NH₃. A sample volume of 45 mL was selected as optimum. The adsorption capacity for tartrazine with Zr-BTeC was found to be 185 mg g^-1 and the adsorbent was reusable up to 40 cycles. The tartrazine concentrations found by the developed method in food supplements were compared with the results obtained by HPLC method for the same samples. Statistical analysis results showed that there are insignificant differences between the results of the two methods (p = .05). The method was successfully applied to the determination of tartrazine in spiked chewing gums, lemon flavoured icing glaze, and jelly samples.

Dissolved organic matter (DOM) removal from biotreated coking wastewater by chitosan-modified biochar: Adsorption fractions and mechanisms

To effectively remove dissolved organic matter (DOM) from actual biotreated coking wastewater (BTCW), a reusable and low-cost chitosan-biochar (CB) was prepared. From the results, CB (52%) exhibited superior removal efficiency compared to that of biochar (12%) and a faster adsorption rate. Analysis of the DOM fractions, molecular weight distribution, fluorescent components, and molecular compositions indicated that chitosan modification made more kinds of DOM components (e.g., hydrophilic substances) have an affinity with biochar. The material characterization and removal characteristics jointly proved that the adsorption efficiency was promoted by the change in pore size distribution and increase in functional groups that provide bonding sites for DOM via hydrogen bonding, acid-base reactions, and electrostatic interactions. Moreover, compared to traditional adsorbent activated carbon, CB exhibited superior removal efficiency and cost-effectiveness. These results demonstrated that CB is a potential alternative adsorbent for advanced DOM treatment of BTCW.