A metal-organic framework/aptamer system as a fluorescent biosensor for determination of aflatoxin B1 in food samples

On-site sensing for aflatoxicosis poisoning via ultraviolet excitable aptasensor based on fluorinated ethylene propylene strip: a promising forensic tool

The environmental contamination by extremophile Aspergillus species, i.e., Aflatoxin B1, is hardly controllable in Southeast Asia and Sub-Saharan Africa, which lack handling resources and controlled storage facilities. Acute aflatoxicosis poisoning from aflatoxin-prone dietary staples could cause acute hepatic necrosis, acute liver failure, and death. Here, as the cheaper, more straightforward, and facile on-site diagnostic kit is needed, we report an ultraviolet-excitable optical aptasensor based on a fluorinated ethylene propylene film strip. Molecular dynamics on the aptamer.AFB1 complex revealed that the AFB1 to the aptamer increases the overall structural stability, suggesting that the aptamer design is suitable for the intended application. Under various influencing factors, the proposed label-free strategy offers a fast 20-min on-site fabrication simplicity and 19-day shelf-life. The one-pot incubation provides an alternative to catalytic detection and exhibited 4 times reusability. The recovery of crude brown sugar, processed peanuts, and long-grain rice were 102.74 ± 0.41 (n = 3), 86.90 ± 3.38 (n = 3), and 98.50 ± 0.42 (n = 3), comparable to High-Performance Liquid Chromatography-Photodiode Array Detector results. This study is novel owing to the peculiar UV-active spectrum fingerprint and the convenient use of hydrophobic film strips that could promote breakthrough innovations and new frontiers for on-site/forensic detection of environmental pollutants.

Macro-micro exploration on dynamic interaction between aflatoxigenic Aspergillus flavus and maize kernels using Vis/NIR hyperspectral imaging and SEM technology

Aspergillus flavus and its toxic metabolites-aflatoxins infect and contaminate maize kernels, posing a threat to grain safety and human health. Due to the complexity of microbial growth and metabolic processes, dynamic mechanisms among fungal growth, nutrient depletion of maize kernels and aflatoxin production is still unclear. In this study, visible/near infrared (Vis/NIR) hyperspectral imaging (HSI) combined with the scanning electron microscope (SEM) was used to elucidate the critical organismal interaction at kernel (macro-) and microscopic levels. As kernel damage is the main entrance for fungal invasion, maize kernels with gradually aggravated damages from intact to pierced to halved kernels with A. flavus were cultured for 0-120 h. The spectral fingerprints of the A. flavus-maize kernel complex over time were analyzed with principal components analysis (PCA) of hyperspectral images, where the pseudo-color score maps and the loading plots of the first three PCs were used to investigate the dynamic process of fungal infection and to capture the subtle changes in the complex with different hardness of the maize matrix. The dynamic growth process of A. flavus and the interactions of fungus-maize complexes were explained on a microscopic level using SEM. Specifically, fungus morphology, e.g., hyphae, conidia, and conidiophore (stipe) was accurately captured on the microscopic level, and the interaction process between A. flavus and nutrient loss from the maize kernel tissues (i.e., embryo, and endosperm) was described. Furthermore, the growth stage discrimination models based on PLSDA with the results of CCRC = 100 %, CCRV = 97 %, CCRIV = 93 %, and the prediction models of AFB1 based on PLSR with satisfactory performance (R2C = 0.96, R2V = 0.95, R2IV = 0.93 and RPD = 3.58) were both achieved. In conclusion, the results from both macro-level (Vis/NIR-HSI) and micro-level (SEM) assessments revealed the dynamic organismal interactions in A. flavus-maize kernel complex, and the detailed data could be used for modeling, and quantitative prediction of aflatoxin, which would establish a theoretical foundation for the early detection of fungal or toxin contaminated grains to ensure food security.

Detection mechanism and the outlook of metal-organic frameworks for the detection of hazardous substances in milk

Milk has a high nutritional value. However, milk is easily contaminated in the production, processing, and storage processes, which harms consumers' health. Therefore, the harmful substances' detection in milk is important. Metal-organic frameworks (MOFs) have proven high potential in food safety detection due to their unique porous structure, large effective surface area, large porosity, and structural tunability. This article systematically describes the detection mechanism of fluorescence, electrochemical, colorimetric, and enzyme-linked immunosorbent assay based on MOFs. The progress of the application of MOFs in the detection of antibiotics, harmful microorganisms and their toxins, harmful ions, and other harmful substances in milk in recent years is reviewed. The structural tunability of MOFs enables them to be functionalized, giving the ability to be applied to different detection methods or substances. Therefore, MOFs can be used as an advantageous sensing material for detecting harmful substances in the complex environment of milk.

MOF@Au NPs/aptamer fluorescent probe for the selective and sensitive detection of thiamethoxam

The luminescence performance of fluorescent reagents plays a crucial role in fluorescence analysis. Therefore, in this study, a novel bi-ligand Zn-based metal-organic framework, Au nanoparticle (NP) fluorescent material was synthesized using a hydrothermal method with Zn as the metal source. Simultaneously, a DNA aptamer was introduced as a molecular recognition element to develop a Zn-based MOF@Au NPs/DNA aptamer fluorescent probe for the ultra-trace detection of thiamethoxam residues in agricultural products. The probe captured different concentrations of the target molecule, thiamethoxam, through the DNA aptamer, causing a conformational change in the DNA aptamer and bursting the fluorescence of the probe, therefore establishing a fluorometric method for thiamethoxam detection. This method is highly sensitive due to the excellent luminescence properties of the Zn-based MOF@Au NPs, and the DNA aptamer can specifically recognize thiamethoxam, offering high selectivity. The linear range of the method was 2.5-6000 × 10-11  mol L-1 , with a detection limit of 8.33 × 10-12  mol L-1 . This method was applied to the determination of actual samples, such as bananas, and the spiked recovery rate was found to be in the range 84.05-109.07%. Overall, the proposed probe has high sensitivity, high selectivity, and easy operation for the detection of thiamethoxam residues in actual samples.

Aptamer-based kinetically controlled DNA reactions coupled with metal-organic framework nanoprobes for sensitive detection of SARS-CoV-2 spike protein

Since the outbreak in 2019, COVID-19, caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has become the deadliest infectious disease worldwide for people of all ages, from children to older adults. As a main structural protein of SARS-CoV-2, spike protein is reported to play a key role in the entry of the virus into host cells and is considered as an effective antigenic marker for COVID-19 diagnosis. Herein, we develop a new aptamer-based fluorescence method for SARS-CoV-2 spike protein detection based on using kinetically controlled DNA reactions and metal-organic framework nanoprobes. Specifically, the binding of SARS-CoV-2 spike protein to its aptamer is designed to precisely control the kinetics of a DNA displacement reaction, leading to the release of free signaling probes. By reasonable integration of magnetic enrichment and exonuclease-fuelled recycling, the released probes efficiently disrupt the interaction within metal-organic framework nanoprobes, thereby generating a remarkable fluorescent response. Experimental results show that the method not only exhibits a wide linear range and a low detection limit of 7.8 fg mL-1 for SARS-CoV-2 spike protein detection but also demonstrates desirable specificity and utility in complex samples. Therefore, the method may provide a valuable tool for the detection of SARS-CoV-2 spike protein, and has bright prospects in the rapid diagnosis of COVID-19, which is of great significance for guiding rational treatment during a pandemic of respiratory infectious diseases and reducing the occurrence of severe disease in children.

A Fluorescence Resonance Energy Transfer Aptasensor for Aflatoxin B1 Based on Ligand-Induced ssDNA Displacement

In this study, a fluorescence resonance energy transfer (FRET)-based aptasensor for the detection of aflatoxin B1 (AFB1) was designed using a carboxyfluorescein (FAM)-labeled aptamer and short complementary DNA (cDNA) labeled with low molecular quencher RTQ1. The sensing principle was based on the detection of restored FAM-aptamer fluorescence due to the ligand-induced displacement of cDNA in the presence of AFB1, leading to the destruction of the aptamer/cDNA duplex and preventing the convergence of FAM and RTQ1 at the effective FRET distance. Under optimal sensing conditions, a linear correlation was obtained between the fluorescence intensity of the FAM-aptamer and the AFB1 concentration in the range of 2.5-208.3 ng/mL with the detection limit of the assay equal to 0.2 ng/mL. The assay time was 30 min. The proposed FRET aptasensor has been successfully validated by analyzing white wine and corn flour samples, with recovery ranging from 76.7% to 91.9% and 84.0% to 86.5%, respectively. This work demonstrates the possibilities of labeled cDNA as an effective and easily accessible tool for sensitive AFB1 detection. The homogeneous FRET aptasensor is an appropriate choice for contaminant screening in complex matrices.

Development of Au8 nanocluster-based fluorescent strip immunosensor for sensitive detection of aflatoxin B1

Gold clusters with intriguing chemical/physical properties have great promise in applications such as sensing and bio-imaging due to their fascinating photoluminescence character. In this study, an immunofluorescence sensor based on levonorgestrel protected atomically precise Au₈ nanocluster (Au₈NC) for aflatoxin B₁ (AFB₁) detection was fabricated due to its strong carcinogenic and mutagenic effect on humans. The prepared polymer-Au₈NC nanospheres displayed bright luminescence and good stability in aqueous solution. The obtained AFB₁ fluorescent strip immunosensor achieved quantitative point-of-care detection of AFB₁ in less than 15 min, with high selectivity and detection limits down to 0.27 ng/mL. In addition, the recovery rates of AFB₁ from tea soup ranged from 96% to 105% with relative standard deviations less than 10%. This work not only realized high-sensitively fluorescent sensing for AFB₁, but also expanded the bio-applications of atomic-precise metal clusters.

Aptamer-modified metal organic frameworks for measurement of food contaminants: a review

The measurement of food contaminants faces a great challenge owing to the increasing demand for safe food, increasing consumption of fast food, and rapidly changing patterns of human consumption. As different types of contaminants in food products can pose different levels of threat to human health, it is desirable to develop specific and rapid methods for their identification and quantification. During the past few years, metal-organic framework (MOF)-based materials have been extensively explored in the development of food safety sensors. MOFs are porous crystalline materials with tunable composition, dynamic porosity, and facile surface functionalization. The construction of high-performance biosensors for a range of applications (e.g., food safety, environmental monitoring, and biochemical diagnostics) can thus be promoted through the synergistic combination of MOFs with aptamers. Accordingly, this review article delineates recent innovations achieved for the aptamer-functionalized MOFs toward the detection of food contaminants. First, we describe the basic concepts involved in the detection of food contaminants in terms of the advantages and disadvantages of the commonly used analytical methods (e.g., DNA-based methods (PCR/real-time PCR/multiplex PCR/digital PCR) and protein-based methods (enzyme-linked immunosorbent assay/immunochromatography assay/immunosensor/mass spectrometry). Afterward, the progress in aptamer-functionalized MOF biosensors is discussed with respect to the sensing mechanisms (e.g., the role of MOFs as signal probes and carriers for loading signal probes) along with their performance evaluation (e.g., in terms of sensitivity). We finally discuss challenges and opportunities associated with the development of aptamer-functionalized MOFs for the measurement of food contaminants.

Dual Signal-Enhanced Electrochemiluminescence Strategy Based on Functionalized Biochar for Detecting Aflatoxin B1

Metal-organic frameworks (MOFs) are often used as carriers in the preparation of electrochemiluminescent (ECL) materials, and ECL materials stabilized in the aqueous phase can be prepared by encapsulating chromophores inside MOFs by an in situ growth method. In this study, nanocomposites MIL-88B(Fe)-NH2@Ru(py)32+ with excellent ECL response were prepared by encapsulating Tris(2,2'-bipyridine)ruthenium dichloride (Ru(py)32+) inside MIL-88B(Fe)-NH2 using the one-step hydrothermal method. MIL-88B(Fe)-NH2 possesses abundant amino groups, which can accelerate the catalytic activation process of K2S2O8, and its abundant pores are also conducive to the enhancement of the transmission rate of co-reactant agents, ions, and electrons, which effectively improves the ECL efficiency. In order to obtain more excellent ECL signals, we prepared aminated biochar (NH2-biochar) using Pu-erh tea dregs as precursor and loaded gold nanoparticles (Au NPs) on its surface as substrate material for modified electrodes. Both NH2-biochar and Au NPs can also be used as a co-reactant promoter to catalyze the activation process of co-reactant K2S2O8. Therefore, a sandwich-type ECL immunosensor was prepared based on a dual signal-enhanced strategy for the highly sensitive and selective detection of aflatoxin B1 (AFB1). Under the optimal experimental conditions, the sensitive detection of AFB1 was achieved in the range of 1 pg·mL-1~100 ng·mL-1 with a detection limit of 209 fg·mL-1. The proposed dual signal-enhanced ECL immunosensor can provide a simple, convenient, and efficient method for the sensitive detection of AFB1 in food and agricultural products.

Advances in aptamers, and application of mycotoxins detection: A review

Mycotoxin contamination in food products can easily cause serious health hazards and economic losses to human beings. How to accurately detect and effectively control mycotoxin contamination has become a global concern. Mycotoxins conventional detection techniques e.g; ELISA, HPLC, have limitations like, low sensitivity, high cost and time-consuming. Aptamer-based biosensing technology has the advantages of high sensitivity, high specificity, wide linear range, high feasibility, and non-destructiveness, which overcomes the shortcomings of conventional analysis techniques. This review summarizes the sequences of mycotoxin aptamers that have been reported so far. Based on the application of four classic POST-SELEX strategies, it also discusses the bioinformatics-assisted POST-SELEX technology in obtaining optimal aptamers. Furthermore, trends in the study of aptamer sequences and their binding mechanisms to targets is also discussed. The latest examples of aptasensor detection of mycotoxins are classified and summarized in detail. Newly developed dual-signal detection, dual-channel detection, multi-target detection and some types of single-signal detection combined with unique strategies or novel materials in recent years are focused. Finally, the challenges and prospects of aptamer sensors in the detection of mycotoxins are discussed. The development of aptamer biosensing technology provides a new approach with multiple advantages for on-site detection of mycotoxins. Although aptamer biosensing shows great development potential, still some challenges and difficulties are there in practical applications. Future research need high focus on the practical applications of aptasensors and the development of convenient and highly automated aptamers. This may lead to the transition of aptamer biosensing technology from laboratory to commercialization.

Highly sensitive fluorescent quantification of carbendazim by two-dimensional Tb-MOF nanosheets for food safety

Carbendazim (CBZ), a well-known benzimidazole pesticide, is utilized in agriculture to prevent and cure plant diseases caused by fungi. Residual CBZ in food poses serious threat to human health. Herein, a fluorescent two-dimensional terbium-based metal-organic framework (2D Tb-MOF) nanosheet sensor was developed for the rapid and ultrasensitive detection of CBZ. The 2D Tb-MOF nanosheets, prepared with Tb³⁺ ions and 5-borono-1,3-benzenedicarboxylic acid (BBDC) as the precursors, exhibited excellent optical properties. Upon the addition of CBZ, the fluorescence of Tb-MOF nanosheets was quenched because of the inner filter effect (IFE) and dynamic quenching. The fluorescence sensor offered two linear ranges of 0.06-4 and 4-40 µg/mL with a low detection limit of 17.95 ng/mL. Furthermore, the proposed sensing platform was successfully applied to assay CBZ in apples and tea, and satisfactory results were obtained. This study provides an effective alternative strategy for the qualitative and quantitative determination of CBZ to ensure food safety.

Metal-organic frameworks (MOFs) based luminescent and electrochemical sensors for food contaminant detection

With the increasing population, food toxicity has become a prevalent concern due to the growing contaminants of food products. Therefore, the need for new materials for toxicant detection and food quality monitoring will always be in demand. Metal-organic frameworks (MOFs) based on luminescence and electrochemical sensors with tunable porosity and active surface area are promising materials for food contaminants monitoring. This review summarizes and studies the most recent progress on MOF sensors for detecting food contaminants such as pesticides, antibiotics, toxins, biomolecules, and ionic species. First, with the introduction of MOFs, food contaminants and materials for toxicants detection are discussed. Then the insights into the MOFs as emerging materials for sensing applications with luminescent and electrochemical properties, signal changes, and sensing mechanisms are discussed. Next, recent advances in luminescent and electrochemical MOFs food sensors and their sensitivity, selectivity, and capacities for common food toxicants are summarized. Further, the challenges and outlooks are discussed for providing a new pathway for MOF food contaminant detection tools. Overall, a timely source of information on advanced MOF materials provides materials for next-generation food sensors.

Aflatoxin detection technologies: recent advances and future prospects

Aflatoxins have posed serious threat to food safety and human health. Therefore, it is important to detect aflatoxins in samples rapidly and accurately. In this review, various technologies to detect aflatoxins in food are discussed, including conventional ones such as thin-layer chromatography (TLC), high performance liquid chromatography (HPLC), enzyme linked immunosorbent assay (ELISA), colloidal gold immunochromatographic assay (GICA), radioimmunoassay (RIA), fluorescence spectroscopy (FS), as well as emerging ones (e.g., biosensors, molecular imprinting technology, surface plasmon resonance). Critical challenges of these technologies include high cost, complex processing procedures and long processing time, low stability, low repeatability, low accuracy, poor portability, and so on. Critical discussion is provided on the trade-off relationship between detection speed and detection accuracy, as well as the application scenario and sustainability of different technologies. Especially, the prospect of combining different technologies is discussed. Future research is necessary to develop more convenient, more accurate, faster, and cost-effective technologies to detect aflatoxins.

Nanomaterial interfaces designed with different biorecognition elements for biosensing of key foodborne pathogens

Foodborne diseases caused by pathogen bacteria are a serious problem toward the safety of human life in a worldwide. Conventional methods for pathogen bacteria detection have several handicaps, including trained personnel requirement, low sensitivity, laborious enrichment steps, low selectivity, and long-term experiments. There is a need for precise and rapid identification and detection of foodborne pathogens. Biosensors are a remarkable alternative for the detection of foodborne bacteria compared to conventional methods. In recent years, there are different strategies for the designing of specific and sensitive biosensors. Researchers activated to develop enhanced biosensors with different transducer and recognition elements. Thus, the aim of this study was to provide a topical and detailed review on aptamer, nanofiber, and metal organic framework-based biosensors for the detection of food pathogens. First, the conventional methods, type of biosensors, common transducer, and recognition element were systematically explained. Then, novel signal amplification materials and nanomaterials were introduced. Last, current shortcomings were emphasized, and future alternatives were discussed.

Simple and cheap CRISPR/Cas12a biosensor based on plug-and-play of DNA aptamers for the detection of endocrine-disrupting compounds

Endocrine-disrupting compounds (EDCs) are widely distributed in the environment. Here, we present a CRISPR/Cas12a (CAS) biosensor based on DNA aptamers for point-of-care detection of EDCs. Two typical EDCs, 17β-estradiol (E2) and bisphenol A (BPA), were selected to be detected by the CAS biosensors via the plug-and-play of their DNA aptamers. The results indicated that the performance of the CAS biosensors can be well regulated by controlling the trans-cleavage activity of Cas12a on a single-stranded DNA reporter and optimizing the sequence and ratio of DNA aptamer and activator DNA. Ultimately, two reliable and specific biosensors were developed, with the linear range and limit of detection of 0.2-25 nM and 0.08 nM for E2 and of 0.1-250 nM and 0.06 nM for BPA, respectively. Compared to the existing detection methods, the CAS biosensors showed higher reliability and sensitivity with simple operation, short detection time, and no costly equipment.

A universal design of turn-on fluorescent aptasensor based on luminescent MOFs: Application for the detection of bisphenol A in water, milk and chicken samples

A universal design of turn-on fluorescent aptasensor based on aptamer functionalized gold nanoparticles (AuNPs) and luminescent metal-organic frameworks (LMOFs) complex (AuNPs-Apt/NH₂-MIL-125(Ti)) was realized for bisphenol A (BPA) detection. LMOF NH₂-MIL-125(Ti) was prepared using facial hydrothermal method. BPA aptamer functionalized AuNPs were prepared and adsorbed on the surface of NH₂-MIL-125(Ti) to obtain platform of the fluorescent aptasensor. The fabrication process, sensing performance and applicability of the proposed aptasensor were characterized and investigated carefully. Linear detection range of the constructed aptasensor was from 1 × 10^-9 mol L^-1 to 1 × 10^-4 mol L^-1 with good selectivity, repeatability, stability and reproducibility under optimal experimental conditions. Meanwhile, the fluorescent aptasensor was successfully utilized for BPA detection in real samples with the recoveries of 95.80%-103.12%. The proposed aptasensor based on AuNPs-Apt/NH₂-MIL-125(Ti) holds significant potential for BPA detection in environmental and food samples, promoting the construction and application of LMOFs-based aptasensor.

Recent advances in optical aptasensors for biomarkers in early diagnosis and prognosis monitoring of hepatocellular carcinoma

Hepatocellular carcinoma (HCC) accounts for approximately 90% of all primary liver cancers and is one of the main malignant tumor types globally. It is essential to develop rapid, ultrasensitive, and accurate strategies for the diagnosis and surveillance of HCC. In recent years, aptasensors have attracted particular attention owing to their high sensitivity, excellent selectivity, and low production costs. Optical analysis, as a potential analytical tool, offers the advantages of a wide range of targets, rapid response, and simple instrumentation. In this review, recent progress in several types of optical aptasensors for biomarkers in early diagnosis and prognosis monitoring of HCC is summarized. Furthermore, we evaluate the strengths and limitations of these sensors and discuss the challenges and future perspectives for their use in HCC diagnosis and surveillance.

Covalent Organic Frameworks-Based Electrochemical Sensors for Food Safety Analysis

Food safety is a key issue in promoting human health and sustaining life. Food analysis is essential to prevent food components or contaminants causing foodborne-related illnesses to consumers. Electrochemical sensors have become a desirable method for food safety analysis due to their simple, accurate and rapid response. The low sensitivity and poor selectivity of electrochemical sensors working in complex food sample matrices can be overcome by coupling them with covalent organic frameworks (COFs). COFs are a kind of novel porous organic polymer formed by light elements, such as C, H, N and B, via covalent bonds. This review focuses on the recent progress in COF-based electrochemical sensors for food safety analysis. Firstly, the synthesis methods of COFs are summarized. Then, a discussion of the strategies is given to improve the electrochemistry performance of COFs. There follows a summary of the recently developed COF-based electrochemical sensors for the determination of food contaminants, including bisphenols, antibiotics, pesticides, heavy metal ions, fungal toxin and bacterium. Finally, the challenges and the future directions in this field are discussed.

Metal-organic frameworks for food contaminant adsorption and detection

Metal-organic framework materials (MOFs) have been widely used in food contamination adsorption and detection due to their large specific surface area, specific pore structure and flexible post-modification. MOFs with specific pore size can be targeted for selective adsorption of some contaminants and can be used as pretreatment and pre-concentration steps to purify samples and enrich target analytes for food contamination detection to improve the detection efficiency. In addition, MOFs, as a new functional material, play an important role in developing new rapid detection methods that are simple, portable, inexpensive and with high sensitivity and accuracy. The aim of this paper is to summarize the latest and insightful research results on MOFs for the adsorption and detection of food contaminants. By summarizing Zn-based, Cu-based and Zr-based MOFs with low cost, easily available raw materials and convenient synthesis conditions, we describe their principles and discuss their applications in chemical and biological contaminant adsorption and sensing detection in terms of stability, adsorption capacity and sensitivity. Finally, we present the limitations and challenges of MOFs in food detection, hoping to provide some ideas for future development.

Aptamers-functionalized nanoscale MOFs for saxitoxin and tetrodotoxin sensing in sea foods through FRET

Saxitoxin (STX) and tetrodotoxin (TTX) are widely distributed and extremely harmful marine toxins, it is certainly worth to spend effort to develop facile methods to detect them in sea food for human safety. In this work, two nano-sensors were developed by combining with two zirconium fluorescence Nanoscale metal-organic frameworks (NMOFs) with two emissions and TAMRA-labelled aptamers for STX and TTX sensing, respectively. The recognition of STX and TTX by these nano-sensors could change the structure of aptamer, which caused the blue or green emissions from NMOFs (energy donor) decreased while red emission from TAMRA-labelled aptamers (energy acceptor) increased owing to fluorescence resonance energy transfer (FRET) effect. Based on this strategy, NMOFs-Aptasensor 1 and NMOFs-Aptasensor 2 were developed for the ratiometric detection, with detection limits of 1.17 nM and 3.07 nM for STX and TTX, respectively. Moreover, NMOFs-Aptasensors displayed significant stability, pH-independence, selectivity and NMOFs-Aptasensors were successfully applied in shellfish sample for toxin sensing.

Dual-signal output fluorescent aptasensor based on DNA programmability and gold nanoflowers for multiple mycotoxins detection

Herein, a dual-signal output fluorescent aptamer sensor was constructed for the simultaneous detection of aflatoxin B₁ (AFB₁) and ochratoxin A (OTA) using the specific recognition ability of aptamers and the programmability of DNA. A functional capture probe (cDNA) was designed with the black hole quenching motif BHQ1 labeled at the 5' end and biotin (bio) labeled at the 3' end. The fluorescent dye Cy3-labeled aflatoxin B1 aptamer (AFB₁-Apt) and the carboxyfluorescein FAM-labeled ochratoxin A aptamer (OTA-Apt) were used as two fluorescent probes. The cDNA is anchored to the quenching material gold nanoflowers (AuNFs) by the action of streptavidin (SA) and biotin. Its ends can be complementarily paired with two fluorescent probe bases to form a double-stranded structure. The fluorescence of Cy3 was quenched by AuNFs, and the fluorescence of FAM was quenched by BHQ1 through the fluorescence energy resonance transfer (FRET) effect, forming a fluorescence quenching system. Due to the high affinity of the target and the aptamer, the structure of the aptamer probe changes and detaches from the sensor when AFB₁ and OTA are present, resulting in enhanced fluorescence. Under optimal conditions, the linear range of AFB₁ was 0.1-100 ng/mL (R² = 0.996), the limit of detection (LOD) was as low as 0.014 ng/mL, and the limit of quantification (LOQ) was 0.046 ng/mL. The linear range of OTA was 0.1-100 ng/mL (R² = 0.995), the limit of detection (LOD) was as low as 0.027 ng/mL, and the limit of quantification (LOQ) was 0.089 ng/mL. The sensor had high accuracy in detecting both AFB₁ and OTA in real sample analysis. The results of the t test show that there is no significant difference between the results of this study and the high-performance liquid phase (HPLC) method, indicating that the prepared sensor can be used as a potential platform for multiple mycotoxins detection.

ZIF-8 base-aptamer "gate-lock" probes enable the visualization of a cascade response between deoxynivalenol and cytochrome c inside living cells

Zeolitic imidazolate framework (ZIF-8) base-aptamer "gate-lock" biomaterial probes have been synthesized for monitoring intracellular deoxynivalenol (DON) and cytochrome c (cyt c) levels. The aptamer and organic fluorescent dye were regarded as a recognition element and a sensing element, respectively. In the presence of DON, the aptamers of DON and cyt c were specifically bound with the DON and induced cyt c, leading to the dissociation of aptamers from the porous surface of the probes. The gate was subsequently opened to release methylene blue (MB) and Rhodamine 6G (Rh6G), and their fluorescence (emission of MB at 700 nm and Rh6G at 550 nm) significantly recovered within 6 h. Cell imaging successfully monitored the exposure of DON and the biological process of cyt c discharge triggered by the activation of the DON-induced apoptosis pathway. In addition, the response between DON and cyt c was observed during the apoptosis process, which is of high significance for the comprehensive and systematic development of mycotoxins cytotoxicity.

A highly sensitive competitive aptasensor for AFB1 detection based on an exonuclease-assisted target recycling amplification strategy

Aflatoxin B₁ (AFB₁) is a typical mycotoxin found in agricultural products, and poses a huge threat to both humans and animals. Accurate and rapid measurement of AFB₁ is essential for environmental analysis and food safety. Based on molecular docking simulation design and exonuclease-assisted target recycling amplification, we designed a competitive fluorescence aptasensor to detect AFB₁ rapidly and sensitively. According to the molecular docking simulations, a complementary strand (cDNA) was designed by searching for potential binding sites of the aptamer, which had the lowest binding energy. Magnetic beads modified with biotin-Apt were used as the capture probe, while FAM-labeled cDNA acted as the reporter probe. By using EXO I for target recycling amplification, this aptasensor was highly sensitive and selective for AFB₁. The detection limit of the suggested aptasensor under optimal conditions was 0.36 ng mL^-1 (S/N = 3) in the range of 1-1000 ng mL^-1 (R² = 0.991). The developed aptasensor was successfully used to analyze AFB₁ in oil samples.

Reliable and Rapid Detection and Quantification of Enrofloxacin Using a Ratiometric SERS Aptasensor

Reliable detection and quantification of antibiotic residues in food using surface-enhanced Raman spectroscopy remain challenging, since the intensities of SERS signals are vulnerable to matrix and experimental factors. In this work, a ratiometric SERS aptasensor using 6-Carboxyl-X-Rhodamine (ROX)-labeled aptamers and 4-mercaptobenzonitrile (4-MBN)-functionalized gold nanoparticles (Au NPs) as SERS probes was established for the reliable and rapid detection and quantification of enrofloxacin. In the presence of enrofloxacin, the conformational transform of aptamers took place, and the distance between ROX and Au NP increased, which resulted in a decrease in the SERS signal intensity of ROX. Meanwhile, the intensity of the SERS signal of 4-MBN was used as an internal standard. Reliable determination of enrofloxacin was realized using the ratio of the SERS signal intensities of ROX to 4-MBN. Under optimal conditions, the developed ratiometric SERS aptasensor provided a wide linear range from 5 nM to 1 µM, with a correlation coefficient (R²) of 0.98 and a limit of detection (LOD) of 0.12 nM (0.043 ppb). In addition, the developed ratiometric SERS aptasensor was successfully applied for the determination of enrofloxacin in fish and chicken meat, with recovery values of 93.6-112.0%. Therefore, the established ratiometric SERS aptasensor is sensitive, reliable, time-efficient, and has the potential to be applied in the on-site detection of enrofloxacin in complex matrices.

MOF-Based Mycotoxin Nanosensors for Food Quality and Safety Assessment through Electrochemical and Optical Methods

Mycotoxins in food are hazardous for animal and human health, resulting in food waste and exacerbating the critical global food security situation. In addition, they affect commerce, particularly the incomes of rural farmers. The grave consequences of these contaminants require a comprehensive strategy for their elimination to preserve consumer safety and regulatory compliance. Therefore, developing a policy framework and control strategy for these contaminants is essential to improve food safety. In this context, sensing approaches based on metal-organic frameworks (MOF) offer a unique tool for the quick and effective detection of pathogenic microorganisms, heavy metals, prohibited food additives, persistent organic pollutants (POPs), toxins, veterinary medications, and pesticide residues. This review focuses on the rapid screening of MOF-based sensors to examine food safety by describing the main features and characteristics of MOF-based nanocomposites. In addition, the main prospects of MOF-based sensors are highlighted in this paper. MOF-based sensing approaches can be advantageous for assessing food safety owing to their mobility, affordability, dependability, sensitivity, and stability. We believe this report will assist readers in comprehending the impacts of food jeopardy exposure, the implications on health, and the usage of metal-organic frameworks for detecting and sensing nourishment risks.

An Overview of the Design of Metal-Organic Frameworks-Based Fluorescent Chemosensors and Biosensors

Taking advantage of high porosity, large surface area, tunable nanostructures and ease of functionalization, metal-organic frameworks (MOFs) have been popularly applied in different fields, including adsorption and separation, heterogeneous catalysis, drug delivery, light harvesting, and chemical/biological sensing. The abundant active sites for specific recognition and adjustable optical and electrical characteristics allow for the design of various sensing platforms with MOFs as promising candidates. In this review, we systematically introduce the recent advancements of MOFs-based fluorescent chemosensors and biosensors, mainly focusing on the sensing mechanisms and analytes, including inorganic ions, small organic molecules and biomarkers (e.g., small biomolecules, nucleic acids, proteins, enzymes, and tumor cells). This review may provide valuable references for the development of novel MOFs-based sensing platforms to meet the requirements of environment monitoring and clinical diagnosis.

A High-Performance Self-Supporting Electrochemical Biosensor to Detect Aflatoxin B1

High-performance electrochemical biosensors for the rapid detection of aflatoxin B1 (AFB₁) are urgently required in the food industry. Herein, a multi-scaled electrochemical biosensor was fabricated by assembling carboxylated polystyrene nanospheres, an aptamer and horseradish peroxidase into a free-standing carbon nanofiber/carbon felt support. The resulting electrochemical biosensor possessed an exceptional performance, owing to the unique structures as well as the synergistic effects of the components. The 3D porous carbon nanofiber/carbon felt support served as an ideal substrate, owing to the excellent conductivity and facile diffusion of the reactants. The integration of carboxylated polystyrene nanospheres with horseradish peroxidase was employed as a signal amplification probe to enhance the electrochemical responses via catalyzing the decomposition of hydrogen peroxide. With the aid of the aptamer, the prepared sensors could quantitatively detect AFB₁ in wine and soy sauce samples via differential pulse voltammetry. The recovery rates of AFB₁ in the samples were between 87.53% and 106.71%. The limit of detection of the biosensors was 0.016 pg mL^-1. The electrochemical biosensors also had excellent sensitivity, reproducibility, specificity and stability. The synthetic strategy reported in this work could pave a new route to fabricate high-performance electrochemical biosensors for the detection of mycotoxins.

Recent Progress in Aptamer-Functionalized Metal-Organic Frameworks-Based Optical and Electrochemical Sensors for Detection of Mycotoxins

Mycotoxin contamination in foodstuffs and agricultural products has posed a serious hazard to human health and raised international concern. The progress of cost-effective, facile, rapid and reliable analytical tools for mycotoxin determination is in urgent need. In this regard, the potential utility of metal-organic frameworks (MOFs) as a class of crystalline porous materials has sparked immense attention due to their large specific surface area, adjustable pore size, nanoscale framework structure and good chemical stability. The amalgamation of MOFs with high-affinity aptamers has resulted in the progress of advanced aptasensing methods for clinical and food/water safety diagnosis. Aptamers have many advantages over classical approaches as exceptional molecular recognition constituents for versatile bioassays tools. The excellent sensitivity and selectivity of the MOF-aptamer biocomposite nominate them as efficient lab-on-chip tools for portable, label-free, cost-effective and real-time screening of mycotoxins. Current breakthroughs in the concept, progress and biosensing applications of aptamer functionalized MOFs-derived electrochemical and optical sensors for mycotoxins have been discussed in this study. We first highlighted an overview part, which provides some insights into the functionalization mechanisms of MOFs with aptamers, offering a foundation to create MOFs-based aptasensors. Then, we discuss various strategies to design high-performance MOFs-based aptamer scaffolds, which serve as either signal nanoprobe carriers or signal nanoprobes and their applications. We perceived that applications of optical aptamers are in their infancy in comparison with electrochemical MOFs-derived aptasensors. Finally, current challenges and prospective trends of MOFs-aptamer sensors are discussed.

Expanding the Scope of Nanobiocatalysis and Nanosensing: Applications of Nanomaterial Constructs

The synergistic interaction between advanced biotechnology and nanotechnology has allowed the development of innovative nanomaterials. Those nanomaterials can conveniently act as supports for enzymes to be employed as nanobiocatalysts and nanosensing constructs. These systems generate a great capacity to improve the biocatalytic potential of enzymes by improving their stability, efficiency, and product yield, as well as facilitating their purification and reuse for various bioprocessing operating cycles. The different specific physicochemical characteristics and the supramolecular nature of the nanocarriers obtained from different economical and abundant sources have allowed the continuous development of functional nanostructures for different industries such as food and agriculture. The remarkable biotechnological potential of nanobiocatalysts and nanosensors has generated applied research and use in different areas such as biofuels, medical diagnosis, medical therapies, environmental bioremediation, and the food industry. The objective of this work is to present the different manufacturing strategies of nanomaterials with various advantages in biocatalysis and nanosensing of various compounds in the industry, providing great benefits to society and the environment.

trans-Cinnamaldehyde-encapsulated zeolitic imidazolate framework-8 nanoparticle complex solutions to inactivate Escherichia coli O157:H7 on fresh spinach leaves

This study synthesized and characterized ZIF-8 nanoparticles encapsulated with trans-cinnamaldehyde oil (TC) and evaluated their antimicrobial effectiveness against Escherichia coli O157:H7 on fresh spinach leaves. The antimicrobial activity of different mass ratios of TC-encapsulated ZIF-8 against E. coli O157:H7 (ATCC 43895) strain was assessed and the best mass ratio of 1:2 TC to ZIF-8 identified. Spinach leaves were treated with (1) 0.5TC@ZIF-8_PL nanoparticle complexes solution, (2) 200 ppm chlorine, (3) free TC, and (4) sterilized distilled water (control). All sample groups were rinsed for 1 min, dried in a biosafety cabinet, weighted, and packed in sterilized Whirl-pk^TM Stand-Up sampling bags, and stored at 4°C for 15 days for shelf life studies. Samples were dipped into a solution of nanoparticles and another group was sprayed. The quality of spinach samples was assessed by monitoring changes in moisture content (MC), water activity (Aw), color, pH, texture (firmness and work), vitamin C content, total carotenoid, and chlorophyll content. Spinach leaves treated with 0.5TC@ZIF-8_PL had less (p < 0.05) water, total chlorophyll, and total carotenoid losses, with minimal changes in pH. However, treatment did not prevent the color degradation (p > 0.05) and adversely affected spinach firmness. The spinach samples treated with 200 ppm chlorine and free TC had higher (p < 0.05) total chlorophyll degradation than the samples treated with the nanoparticles. The mass ratio of TC-encapsulated ZIF-8 must be readjusted to reduce potential toxicity issues while maintaining the antimicrobial properties. PRACTICAL APPLICATION: Zeolitic imidazolate framework-8 (ZIF-8) nanoparticle complex can be used to encapsulate natural antimicrobials to inhibit growth of pathogens on fresh produce. A 2-log reduction in populations of Escherichia coli O157:H7 on fresh spinach leaves was achieved using trans-cinnamaldehyde at low concentrations. The results can be used to embed the compounds into polymeric films for antimicrobial packaging applications.

A Novel Fluorescent Aptasensor Based on Real-Time Fluorescence and Strand Displacement Amplification for the Detection of Ochratoxin A

It is urgently necessary to develop convenient, reliable, ultrasensitive and specific methods of ochratoxin A determination in food safety owing to its high toxicity. In the present study, an ultrasensitive and labeled-free fluorescent aptamer sensor combining real-time fluorescence with strand displacement amplification (SDA) was fabricated for the determination of OTA. In the presence of OTA, the OTA–aptamer combines with OTA, thus opening hairpins. Then, SDA primers specifically bind to the hairpin stem, which is used for subsequent amplification as a template. SDA amplification is initiated under the action of Bst DNA polymerase and nicking endonuclease. The amplified products (ssDNA) are dyed with SYBR Green II and detected with real-time fluorescence. The method has good linearity in the range of 0.01–50 ng mL⁻¹, with the lowest limit of detection of 0.01 ng mL⁻¹. Additionally, the fluorescent aptamer sensor shows outstanding specificity and reproducibility. Furthermore, the sensor shows excellent analytical performance in the artificial labeled detection of wheat and oat samples, with a recovery rate of 96.1~100%. The results suggest that the developed sensor has a promising potential application for the ultrasensitive detection of contaminants in food.

Oxygen Free Radical Scavenger PtPd@PDA as a Dual-Mode Quencher of Electrochemiluminescence Immunosensor for the Detection of AFB1

Here, a dual-mode quenched electrochemiluminescence (ECL) immunosensor based on PtPd@PDA was proposed. Among them, nitrogen-doped hydrazide conjugated carbon dots (NHCDs), as an ECL emitter and a donor of resonance energy transfer, were quenched by PtPd@PDA (receptor). At the same time, PDA in PtPd@PDA, as an oxygen radical scavenger, completed the further quenching of the ECL signal by consuming O₂^•- generated by the decomposition of co-reactant H₂O₂. The dual-mode quenching from the above two channels was achieved. In addition, compared with the traditional carbon quantum dots, NHCDs as ECL emitters had lower excitation potential. Moreover, a large number of amino groups provided by aminated MWCNTs could capture more antibodies while connecting with NHCDs. Under the optimum experimental conditions, taking aflatoxin B1 as the target, the proposed sensor with good specificity, stability, and reproducibility had good linearity when the concentration of AFB1 was 0.01-100 ng/mL, with the detection limit of 2.63 pg/mL (S/N = 3). This strategy provided more possibilities for the application of dopamine metal nanocomposites in electrochemiluminescence analysis and offered a new approach to detect AFB1.

Metal organic frameworks as advanced functional materials for aptasensor design

BACKGROUND

Advancement in coordination chemistry has achieved an impressive development of metal organic frameworks (MOFs) as the supramolecular hybrid materials, comprising harmonized metal nodes with organic ligands. Scope and approach: MOFs offer the unique properties of easy synthesis, nanoscale structure, adjustable size and morphology, high porosity, large surface area, supreme chemical tunability and stability, and biocompatibility. The features provide an exceptional opportunity for the widely usage of MOFs in the different scientific fields, e.g. biomedicine, electrocatalysis, food safety, energy storage, environmental surveillance, and biosensing platforms. The synergistic incorporation of the aptamer advantages and the superiorities of MOFs attains the novel MOF-based aptasensors. The excellent selectivity and sensitivity of the MOF-based aptasensors nominate them as efficient lab-on-chip tools for cost-effective, label-free, portable, and real-time monitoring of diverse targets.

KEY FINDINGS AND CONCLUSIONS

Here, we review the achievements in the sensor design by cooperation of MOF motifs and aptamers with the conspicuous potential of determining the targets. Finally, some results are expressed that provide a valuable viewpoint for developing the novel MOF-based test strips in the future.

A novel magnetic metal-organic framework absorbent for rapid detection of aflatoxins B1B2G1G2 in rice by HPLC-MS/MS

In this study, a core-shell-structured magnetic metal-organic framework (MMOF) composite material (Fe₃O₄@UiO-66-NH₂) was synthesized by the solvothermal method. It was employed as a new absorbent in combination with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) for the simultaneous detection of four aflatoxins (AFs) in rice. This method could shorten the pre-processing time by exploiting the advantageous characteristics of magnetic cores. The impurity was removed quickly. The effects of extraction solution, extraction time, adsorbent types, and amount of adsorbent on the extraction rate of target compounds were optimized. Under optimized conditions, AFs were validated and showed a good linear relationship within the 0.375-20 μg kg^-1 concentration range (r² > 0.9992). The limit of detection (LOD) was 0.0188-0.1250 μg kg^-1 and the limit of quantification (LOQ) was 0.0375-0.3750 μg kg^-1. At three spiking levels (0.375, 2, and 10 μg kg^-1), the average recovery values for the four AFs ranged from 85.1% to 111.0%. The relative standard deviation ranged from 3.4% to 7.7%. The new method proved to be simple, fast, efficient, and suitable for the determination of AFs in rice samples.

Application of Nanomaterials for Coping with Mycotoxin Contamination in Food Safety: From Detection to Control

Mycotoxins, which are toxic secondary metabolites produced by fungi, are harmful to humans. Mycotoxin-induced contamination has drawn attention worldwide. Consequently, the development of reliable and sensitive detection methods and high-efficiency control strategies for mycotoxins is important to safeguard food industry safety and public health. With the rapid development of nanotechnology, many novel nanomaterials that provide tremendous opportunities for greatly improving the detection and control performance of mycotoxins because of their unique properties have emerged. This review comprehensively summarizes recent trends in the application of nanomaterials for detecting mycotoxins (fluorescence, colorimetric, surface-enhanced Raman scattering, electrochemical, and point-of-care testing) and controlling mycotoxins (inhibition of fungal growth, mycotoxin absorption, and degradation). These detection methods possess the advantages of high sensitivity and selectivity, operational simplicity, and rapidity. With research attention on the control of mycotoxins and the gradual excavation of the properties of nanomaterials, nanomaterials are also employed for the inhibition of fungal growth, mycotoxin absorption, and mycotoxin degradation, and impressive controlling effects are obtained. This review is expected to provide the readers insight into this state-of-the-art area and a reference to design nanomaterials-based schemes for the detection and control of mycotoxins.

Electrochemical immunosensor based on AuNPs/Zn/Ni-ZIF-8-800@graphene for rapid detection of aflatoxin B1 in peanut oil

Peanut oil is a basic food raw material in life. However, aflatoxin contamination in peanut oil is considered to be one of the most serious food safety problems in the world. Based on AuNPs/Zn/Ni-ZIF-8-800@graphene composite, a simple, efficient and sensitive electrochemical immunosensor was developed to detect aflatoxin B1 (AFB1) in peanut oil. The bare glassy carbon electrode was modified by graphene, bimetallic organic framework material (Zn/Ni-ZIF-8-800), chitosan and gold nanoparticles. The electrochemical immunosensor was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) and cyclic voltammetry (CV), and the electrochemical signal changes after antibody and AFB1 binding were investigated in detail. Under the optimal conditions, the linear range of the electrochemical immunosensor was 0.18-100 ng/mL, and the detection limit was 0.18 ng/mL. In addition, the prepared sensor has high selectivity and long-term stability, which lays a foundation for the simple, rapid and sensitive detection of AFB1 in peanut oil.

Ratiometric Luminescence Aptasensor Based on Dual-Emissive Persistent Luminescent Nanoparticles for Autofluorescence- and Exogenous Interference-Free Determination of Trace Aflatoxin B1 in Food Samples

Sensitive and accurate determination of aflatoxin B1 (AFB1) is of great significance to food safety and human health as it is recognized as the most toxic mycotoxin and carcinogenic. Herein, we report a ratiometric luminescence aptasensor based on dual-emissive persistent luminescent nanoparticles (PLNP) for the accurate determination of trace AFB1 in complex food samples without autofluorescence and exogenous interference. Dual-emissive PLNP ZnGa₂O₄:Cr_0.0001 was prepared first and acted as the donor for energy transfer as well as the signal unit with phosphorescence at 714 and 508 nm (the detection and the reference signal, respectively). AFB1 aptamer was then bonded on the surface of PLNP to offer specific recognition ability. Aptamer complementary DNA modified with Cy5.5 was employed as the acceptor for energy transfer and the quenching group to eventually develop a turn-on ratiometric luminescence aptasensor. The developed ratiometric luminescence aptasensor combined the merits of long-lasting luminescence, in situ excitation and autofluorescence-free of PLNP, exogenous interference-free and self-calibration reading of ratiometric sensor, as well as the high selectivity of aptamer, holding great promise for accurate determination of trace AFB1 in complex matrix. The developed ratiometric aptasensor exhibited excellent linearity (0.05-70 ng mL^-1), low limit of detection (0.016 ng mL^-1), and good precision (2.3% relative standard deviation for 11 replicate determination of 1 ng mL^-1 AFB1). The proposed ratiometric aptasensor was successfully applied for the determination of AFB1 in corn, wheat, peanut, millet, oats, and wheat kernels with recoveries of 95.1-106.5%.

A fluorescence aptasensor based on GSH@GQDs and RGO for the detection of Glypican-3

Glypican-3 (GPC3), a heparin sulfate proteoglycan, is a potential diagnostic and therapeutic target for hepatocellular carcinoma. In this paper, a novel fluorescent aptasensor for GPC3 detection is constructed via glutathione@graphene quantum dots-labeled GPC3 aptamer (GSH@GQDs-GPC3_Apt) as a fluorescence probe. First, GSH@GQDs is screened out with higher fluorescence intensity, which emits bright blue fluorescence under ultraviolet light. Then, the fluorescence-labeled GSH@GQDs-GPC3_Apt probe is formed by the combination of amination GPC3_Apt and GSH@GQDs using EDC/NHS coupled reaction. Under hydrogen bond and π-π interaction/stacking, the fluorescence of GSH@GQDs-GPC3_Apt could be quenched by reductive graphene oxide (RGO) with the help of the photoinduced electron transfer and the fluorescence resonance energy transfer mechanism. In the presence of GPC3, the GSH@GQDs-GPC3_Apt specifically recognizes and binds to GPC3, giving rise to the change of secondary structure of GPC3_Apt to form the GPC3/GPC3_Apt-GSH@GQDs complex, which would lead to the disintegration of the GSH@GQDs-GPC3_Apt-RGO compound. Therefore, the energy transfer process is blocked and the fluorescence intensity is restored, enabling a highly sensitive response to GPC3. When the concentration of GPC3 is from 5.0 ng/mL to 150.0 ng/mL, the fluorescence recovery rate is well linearly related to GPC3 concentration with the limit of detection of 2.395 ng/mL (S/N = 3). This strategy shows recoveries from 98.31% to 101.89% in human serum samples and provides simple, fast and cheap analysis of GPC3, which suggests that it has great potential applications in clinical diagnosis for hepatocellular carcinoma.

A simple and ultrasensitive metal-organic framework-based aptasensor for fluorescence detection of ethanolamine

In this research, a facile fluorescence aptasensor was designed for the ultrasensitive determination of ethanolamine (ETA) as an aliphatic amino alcohol molecule with harmful side effects for human health. Zeolitic imidazolate framework-8 (ZIF-8) as an efficient metal-organic framework was applied to quench the fluorescence emission of the FAM-labeled ETA aptamer. The presence of ETA could recover the fluorescence response under the optimal experimental conditions. ETA could be sensitively detected by the designed aptasensor in the linear concentration range of 0.1 nM-20 µM with the detection limit of 14.38 pM. The designed aptasensor was utilized to determine ETA in milk and serum samples with the detection limits of 17.86 and 15.21 pM, respectively. The aptasensor with the remarkable features of high sensitivity, simplicity and feasibility holds the supreme potential to construct a low-cost portable sensing method for food safety control, human diagnostics, and environmental monitoring with coupling to the microfluidic paper-based devices.

Recent progress in fluorescent aptasensors for the detection of aflatoxin B1 in food

Aflatoxin B1 pollution is one of the most critical issues of food safety and has been categorized as a group I carcinogen by the International Agency for Research on Cancer. Aflatoxin B1 exists in various foods and feedstuff products and can be produced and contaminate food products in all processes, including growth, harvest, storage, or processing. Therefore, it is of great value for detecting and on-site monitoring aflatoxin B1. Aptamers are short single-stranded DNA or RNA obtained from the nucleic acid molecular library through SELEX. With advantages of high specificity, large affinity, and easy modification, aptasensors have become popular in a wide range of promising applications. This review focuses on recent advances on fluorescent aptamer sensors for the detection of aflatoxin B1, including their design strategies, working mechanisms, and applications to on-site detection. Finally, the current challenges and prospects are discussed.