Silver and gold nanoparticles characterization by SP-ICP-MS and AF4-FFF-MALS-UV-ICP-MS in human samples used for biomonitoring

Biological monitoring of soil pollution caused by two different zinc species using earthworms

Zinc oxide nanoparticles (ZnO-NPs) are commonly used in both commercial and agricultural sectors. As a result, ZnO-NPs are extensively discharged into soil ecosystems, creating a significant environmental issue. Therefore, it is crucial to assess their influence on the soil ecology to ensure its secure and enduring utilization in the future. The exact degree of toxicity associated with ZnO-NPs and their ionic form is still uncertain. To address the challenges, the study used the soil bioindicator earthworm species Eudrilus eugeniae as an experimental model to evaluate the effects of two zinc species (ZnO-NPs and ZnCl2) at 100, 250, 500, and 750 mg kg-1 and control (0 mg kg-1) in garden soil over 28 days. The investigation also examined the impact of exposure on survival, reproduction, neuro-biomarker, avoidance behavior, and accumulation. The highest avoidance rates were 27.5% for ZnO-NP and 37.5% for ZnCl2 at 750 mg kg-1. ZnCl2 treatment reduced juvenile production by 3.73 ± 1.73, while ZnO-NPs showed 4.67 ± 1.15. At 750 mg kg-1, soils with ZnCl2 (63.3%) demonstrated lower survival rates than those with ZnO-NPs (53.3%), likely because of higher Zn ion levels. After 28 days of exposure, ZnCl2 (536.32 ± 11 mol min-1) activated AChE enzymes more than ZnO-NPs (497.7 ± 59 mol min-1) at the same dose, compared to control (145.88 ± 28 to 149.41 ± 23 mol min-1). Nanoparticles and zinc ions bioaccumulated and reacted negatively with the neurotoxic marker AChE, affecting earthworm reproduction and behavior. However, earthworms exposed to ZnCl2 exhibited less intestinal Zn than those exposed to NPs. The present work contradicts the finding that ZnO-NPs have hazardous effects on soil organisms. The results indicate that earthworm E. eugeniae may significantly affect soil metal uptake from metallic nanoparticles (NPs). This may help design NP soil pollution mitigation strategies. The study offers valuable information for establishing a relationship between the environmental toxicity of ZnO-NPs and soil ecosystems.

Optofluidic Force Induction Meets Raman Spectroscopy and Inductively Coupled Plasma-Mass Spectrometry: A New Hyphenated Technique for Comprehensive and Complementary Characterizations of Single Particles

Nanoparticles are produced at accelerating rates, are increasingly integrated into scientific and industrial applications, and are widely discharged into the environment. Analytical techniques are required to characterize parameters such as particle number concentrations, mass and size distributions, molecular and elemental compositions, and particle stability. This is not only relevant to investigate their utility for various industrial or medical applications and for controlling the manufacturing processes but also to assess toxicity and environmental fate. Different analytical strategies aim to characterize certain facets of particles but are difficult to combine to retrieve relevant parameters coherently and to provide a more comprehensive picture. In this work, we demonstrate the first online hyphenation of optofluidic force induction (OF2i) with Raman spectroscopy and inductively coupled plasma-time-of-flight-mass spectrometry (ICP-TOFMS) to harness their complementary technology-specific advantages and to promote comprehensive particle characterizations. We optically trapped individual particles on a weakly focused vortex laser beam by aligning a microfluidic flow antiparallelly to the laser propagation direction. The position of particles in this optical trap depended on the hydrodynamic diameter and therefore enabled size calibration as well as matrix elimination. Additionally, laser light scattered on particles was analyzed in a single particle (SP) Raman spectroscopy setup for the identification of particulate species and phases. Finally, particles were characterized regarding elemental composition and their distributions in mass and size using SP ICP-TOFMS. In a proof of concept, we analyzed polystyrene-based microplastic and TiO2 nanoparticles and demonstrated the opportunities provided through the coupling of OF2i with SP Raman and SP ICP-TOFMS.

Advancing Molecular Weight Determination of Lignin by Multi-Angle Light Scattering

Due to the complexity and recalcitrance of lignin, its chemical characterization is a key factor preventing the valorization of this abundant material. Multi-angle light scattering (MALS) is becoming a sought-after technique for absolute molecular weight (MW) determination of polymers and proteins. Lignin is a suitable candidate for MW determination via MALS, yet further investigation is required to confirm its absolute MW values and molecular size. Studies aiming to break down lignin into a variety of renewable products will benefit greatly from a simple and reliable determination method like MALS. Recent pioneering studies, discussed in this review, addressed several key challenges in lignin's MW characterization. Nevertheless, some lignin-specific issues still need to be considered for in-depth characterization. This study explores how MALS instrumentation manages the complexities of determining lignin's MW, e.g., with simultaneous fractionation and fluorescence interference mitigation. Additionally, we rationalize the importance of a more detailed light scattering analysis for lignin characterization, including aspects like the second virial coefficient and radius of gyration.

Biomarkers of exposure and effect in human biomonitoring of metal-based nanomaterials: their use in primary prevention and health surveillance

Metal-based nanomaterials (MNMs) have gained particular interest in nanotechnology industry. They are used in various industrial processes, in biomedical applications or to improve functional properties of several consumer products. The widescale use of MNMs in the global consumer market has resulted in increases in the likelihood of exposure and risks to human beings. Human exposure to MNMs and assessment of their potential health effects through the concomitant application of biomarkers of exposure and effect of the most commonly used MNMs were reviewed in this paper. In particular, interactions of MNMs with biological systems and the nanobiomonitoring as a prevention tool to detect the early damage caused by MNMs as well as related topics like the influence of some physicochemical features of MNMs and availability of analytical approaches for MNMs testing in human samples were summarized in this review. The studies collected and discussed seek to increase the current knowledge on the internal dose exposure and health effects of MNMs, highlighting the advantages in using biomarkers in primary prevention and health surveillance.

Determination and Characterization of Gold Nanoparticles in Liquor Using Asymmetric Flow Field-Flow Fractionation Hyphenated with Inductively Coupled Plasma Mass Spectrometry

The EU has approved the usage of gold as a food additive (E175) and it has been applied in numerous foods for coloring and decoration purposes. Different from the general assumption that edible gold is mainly present in the form of flakes or external coating in foods, this work demonstrated that gold nanoparticles (Au NPs) can be released from gold flakes and extracted under optimized conditions. To support future risk assessment associated with the exposure of Au NPs to human health, an effective approach was established in this study for both size characterization and mass determination of Au NPs released in a commercial gold-containing liquor using Asymmetric Flow Field-flow Fractionation (AF4) hyphenated with Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Our results showed that no Au NPs were detected in the original liquor product and only after ultrasonication for several minutes did Au NPs occur in the ultrasound-treated liquor. Particularly, Au NPs released in the liquor can be well extracted after 100-fold enrichment of gold flakes and the subsequent ultrasonication for 25 min. Size characterization of Au NPs was conducted by AF4-ICP-MS under calibration with Au NP standards. The gold particle sizes detected ranged from 8.3-398.0 nm and the dominant size of the released Au NPs was around 123.7 nm in the processed liquor. The mass concentration of gold particles determined in the liquor sample with gold flakes concentrated and subsequently sonicated was 48.1 μg L-1 by pre-channel calibration and the overall detection recoveries ranged over 82-95%. For the comparison control samples without ultrasonication, there was no detection of Au NPs. The established method was demonstrated to be useful for monitoring Au NPs in liquor and is possibly applied to other similar foodstuffs.

Porous Polymersomes as Carriers for Silver Nanoparticles and Nanoclusters: Advantages of Compartmentalization for Antimicrobial Usage

The global threat to public health posed by antibiotic-resistant bacterial infections requires the exploration of innovative approaches. Nanomaterials, particularly silver nanoparticles (AgNPs) and nanoclusters (AgNCs), have emerged as potential solutions to address the pressing issue of a bacterial healthcare crisis. However, the high cytotoxicity levels and low stability associated with AgNPs and AgNCs limit their applicability. To overcome these challenges, AgNCs and AgNPs were synthesized in the presence of porous polymersomes, resulting in a compartmentalized system that enhances stability, reduces cytotoxicity, and maintains high antimicrobial activity. The encapsulated particles exhibit a distribution of silver components on both the surface and the core, which is confirmed through the analysis of surface charge and center of mass. Moreover, our investigation demonstrates improved stability of the nanoparticles and nanoclusters upon entrapment in the porous system, as evidenced by the ion release assay. The antimicrobial effectiveness of porous polymersomes containing AgNPs and AgNCs was demonstrated by visualizing the biofilms and quantifying the penetration depth. Furthermore, cytotoxicity studies showed that compartmentalization increases cell compatibility for AgNC-based systems, showcasing the many advantages this system holds.

Ex vivo fluorescence imaging for the identification of rhodamine-labeled bovine serum albumin and chitosan-coated gold and silver nanoparticles

Therapeutic potential and toxic effects of in vivo administered gold nanoparticles (GNPs) and silver nanoparticles (SNP) depend on distribution in tissues. Rhodamine (Rho) labeled bovine serum albumin (BSA) and chitosan (Chi) were prepared by covalent conjugation and were characterized by fluorescence spectral analysis. GNP and SNP were coated with the labeled conjugates of BSA and chitosan by adsorption. The soluble Rho-BSA or Rho-Chi conjugates, uncoated, and conjugate-coated GNP, and SNP were orally administered into 8-week-old rats. After 24 h, rats were euthanized and the liver, kidney, spleen, and thymus were dissected. The tissues were examined ex vivo using a small animal in vivo imaging system. The liver, kidney, and thymus displayed higher fluorescence due to increased accumulation of Rho-BSA or Rho-Chi conjugate-coated nanoparticles (NPs) in the tissues as compared to the spleen where lower fluorescence was noticed. Tissues obtained from rats that were administered Rho-BSA or Rho-Chi conjugate-coated GNP and SNP showed tenfold higher fluorescence intensity as compared to tissues from rats that were given soluble conjugates or NP alone. The results strongly suggest significant tissue distribution of NP following oral administration.

Quantification of monodisperse and biocompatible gold nanoparticles by single-particle ICP-MS

Bioanalytical and biomedical applications often require nanoparticles that exhibit narrow size distributions and biocompatibility. Here, we demonstrate how different synthesis methods affect gold nanoparticle (AuNPs) monodispersity and cytotoxicity. Using single particle inductively coupled plasma mass spectrometry (SP-ICP-MS), we found that the size distribution of AuNPs synthesized with a cetyltrimethylammonium chloride (CTAC) cap was significantly improved compared to AuNPs synthesized with citrate capping agents. We determined an up to 4× decrease in the full width at half maximum (FWHM) value of the normal distributions of AuNP diameter and up to a 12% decrease in relative standard deviation (RSD). While the CTAC-capped AuNPs exhibit narrow nanoparticle size distributions, they are cytotoxic, which limits safe and effective bioanalytical and biomedical applications. We sought to impart biocompatibility to CTAC-capped AuNPs through a PEGylation-based surface ligand exchange. We developed a unique ligand exchange method driven by physical force. We demonstrated the successful PEGylation using various PEG derivatives and used these PEGylated nanoparticles to further bioconjugate nucleic acids and peptides. Using cell viability quantification, we confirmed that the monodisperse PEGylated AuNPs were biocompatible. Our monodisperse and biocompatible nanoparticles may advance safe and effective bioanalytical and biomedical applications of nanomaterials.

Occupational Exposure to Metal Engineered Nanoparticles: A Human Biomonitoring Pilot Study Involving Italian Nanomaterial Workers

Advances in nanotechnology have led to an increased use of engineered nanoparticles (ENPs) and the likelihood for occupational exposures. However, how to assess such exposure remains a challenge. In this study, a methodology for human biomonitoring, based on Single Particle Inductively Coupled Plasma Mass Spectrometry (SP-ICP-MS), was developed as a tool to assess the ENPs exposure of workers involved in nanomaterial activities in two Italian Companies. The method was validated for size and number concentration determination of Ag, Au, In₂O₃, Ir, Pd, Pt, and TiO₂ NPs in urine and blood samples. The results showed the presence of In₂O₃ NPs in blood of exposed workers (mean, 38 nm and 10,371 particles/mL), but not in blood of controls. Silver, Au, and TiO₂ NPs were found in urine (mean, Ag 29 nm and 16,568 particles/mL) or blood (mean, Au 15 nm and 126,635 particles/mL; TiO₂ 84 nm and 27,705 particles/mL) of workers, though these NPs were found also in controls. The presence of ENPs in both workers and controls suggested that the extra-professional exposure is a source of ENPs that cannot be disregarded. Iridium, Pd, and Pt NPs were not detected neither in blood nor in urine. Overall, the findings provided a rational basis to evaluate the exposure assessment to ENPs in cohorts of workers as part of risk assessment and risk management processes in workplaces.

Human biomonitoring and personal air monitoring. An integrated approach to assess exposure of stainless-steel welders to metal-oxide nanoparticles

In welding, there is a potential risk due to metal-oxide nanoparticles (MONPs) exposure of workers. To investigate this possibility, the diameter and number particles concentration of MONPs were evaluated in different biological matrices and in personal air samples collected from 18 stainless-steel welders and 15 unexposed administrative employees engaged in two Italian mechanical engineering Companies. Exhaled breath condensate (EBC) and urine were sampled at pre-shift on 1st day and post-shift on 5th day of the workweek, while plasma and inhalable particulate matter (IPM) at post-shift on 5th day and analysed using the Single Particle Mass Spectrometry (SP-ICP-MS) technique to assess possible exposure to Cr₂O₃, Mn₃O₄ and NiO nanoparticles (NPs) in welders. The NPs in IPM at both Companies presented a multi-oxide composition consisting of Cr₂O₃ (median, 871,574 particles/m³; 70 nm), Mn₃O₄ (median, 713,481 particles/m³; 92 nm) and NiO (median, 369,324 particles/m³; 55 nm). The EBC of welders at both Companies showed Cr₂O₃ NPs median concentration significantly higher at post-shift (64,645 particles/mL; 55 nm) than at pre-shift (15,836 particles/mL; 58 nm). Significantly lower Cr₂O₃ NPs median concentration and size (7762 particles/mL; 44 nm) were observed in plasma compared to EBC of welders. At one Company, NiO NPs median concentration in EBC (22,000 particles/mL; 65 nm) and plasma (8248 particles/mL; 37 nm) were detected only at post-shift. No particles of Cr₂O_3, Mn₃O₄ and NiO were detected in urine of welders at both Companies. The combined analyses of biological matrices and air samples were a valid approach to investigate both internal and external exposure of welding workers to MONPs. Overall, results may inform suitable risk assessment and management procedures in welding operations.

Experience of Using DLS to Study the Particle Sizes of Active Component in the Catalysts Based on the Oxide and Non-Oxide Supports

The present study reports the use of the dynamic light scattering (DLS) method to analyze metal nanoparticle sizes in supported catalysts (as a model system for different metal-oxide nanocomposites, ceramics, etc.). The selective dissolution of matrices has been used to transform solids to sols for DLS analysis. DLS/STS (from solid to sol) technique was tested on a wide number of different sets of supported metal catalysts (Pt, Pd, Ru metals and Al2O3, SiO2, TiO2, C3N4, carbon and polymers as supports). The transmission electron microscopy and X-ray diffraction (TEM/XRD) results for the initial supported catalysts and the DLS results for the sols prepared from them showed good agreement with each other. Moreover, it has been shown that this approach can identify the minor contamination of catalysts by large particles or aggregates which are difficult to detect by TEM/XRD.

Facets of ICP-MS and their potential in the medical sciences-Part 2: nanomedicine, immunochemistry, mass cytometry, and bioassays

Inductively coupled-plasma mass spectrometry (ICP-MS) has transformed our knowledge on the role of trace and major elements in biology and has emerged as the most versatile technique in elemental mass spectrometry. The scope of ICP-MS has dramatically changed since its inception, and nowadays, it is a mature platform technology that is compatible with chromatographic and laser ablation (LA) systems. Over the last decades, it kept pace with various technological advances and was inspired by interdisciplinary approaches which endorsed new areas of applications. While the first part of this review was dedicated to fundamentals in ICP-MS, its hyphenated techniques and the application in biomonitoring, isotope ratio analysis, elemental speciation analysis, and elemental bioimaging, this second part will introduce relatively current directions in ICP-MS and their potential to provide novel perspectives in the medical sciences. In this context, current directions for the characterisation of novel nanomaterials which are considered for biomedical applications like drug delivery and imaging platforms will be discussed while considering different facets of ICP-MS including single event analysis and dedicated hyphenated techniques. Subsequently, immunochemistry techniques will be reviewed in their capability to expand the scope of ICP-MS enabling analysis of a large range of biomolecules alongside elements. These methods inspired mass cytometry and imaging mass cytometry and have the potential to transform diagnostics and treatment by offering new paradigms for personalised medicine. Finally, the interlacing of immunochemistry methods, single event analysis, and functional nanomaterials has opened new horizons to design novel bioassays which promise potential as assets for clinical applications and larger screening programs and will be discussed in their capabilities to detect low-level proteins and nucleic acids.

Facets of ICP-MS and their potential in the medical sciences-Part 1: fundamentals, stand-alone and hyphenated techniques

Since its inception in the early 80s, inductively coupled plasma-mass spectrometry has developed to the method of choice for the analysis of elements in complex biological systems. High sensitivity paired with isotopic selectivity and a vast dynamic range endorsed ICP-MS for the inquiry of metals in the context of biomedical questions. In a stand-alone configuration, it has optimal qualities for the biomonitoring of major, trace and toxicologically relevant elements and may further be employed for the characterisation of disrupted metabolic pathways in the context of diverse pathologies. The on-line coupling to laser ablation (LA) and chromatography expanded the scope and application range of ICP-MS and set benchmarks for accurate and quantitative speciation analysis and element bioimaging. Furthermore, isotopic analysis provided new avenues to reveal an altered metabolism, for the application of tracers and for calibration approaches. In the last two decades, the scope of ICP-MS was further expanded and inspired by the introduction of new instrumentation and methodologies including novel and improved hardware as well as immunochemical methods. These additions caused a paradigm shift for the biomedical application of ICP-MS and its impact in the medical sciences and enabled the analysis of individual cells, their microenvironment, nanomaterials considered for medical applications, analysis of biomolecules and the design of novel bioassays. These new facets are gradually recognised in the medical communities and several clinical trials are underway. Altogether, ICP-MS emerged as an extremely versatile technique with a vast potential to provide novel insights and complementary perspectives and to push the limits in the medical disciplines. This review will introduce the different facets of ICP-MS and will be divided into two parts. The first part will cover instrumental basics, technological advances, and fundamental considerations as well as traditional and current applications of ICP-MS and its hyphenated techniques in the context of biomonitoring, bioimaging and elemental speciation. The second part will build on this fundament and describe more recent directions with an emphasis on nanomedicine, immunochemistry, mass cytometry and novel bioassays.

A Simple Model to Estimate the Number of Metal Engineered Nanoparticles in Samples Using Inductively Coupled Plasma Optical Emission Spectrometry

Accurate determination of the size and the number of nanoparticles plays an important role in many different environmental studies of nanomaterials, such as fate, toxicity, and occurrence in general. This work presents an accurate model that estimates the number of nanoparticles from the mass and molar concentration of gold nanoparticles (AuNPs) in water. Citrate-capped AuNPs were synthesized and characterized using transmission electron microscopy (TEM) and ultraviolet–visible spectroscopy (UV-vis). A mimic of environmental matrices was achieved by spiking sediments with AuNPs, extracted with leachate, and separated from the bulk matrix using centrifuge and phase transfer separation techniques. The quantification of AuNPs’ molar concentration on the extracted residues was achieved by inductively coupled plasma optical emission spectroscopy (ICP-OES). The molar concentrations, an average diameter of 27 nm, and the colloidal suspension volumes of AuNPs enable the calculation of the number of nanoparticles in separated residues. The plot of the number of AuNPs against the mass of AuNPs yielded a simple linear model that was used to estimate the number of nanoparticles in the sample using ICP-OES. According to the authors’ knowledge, this is the first adaptation of the gravimetric method to ICP-OES for estimating the number of nanoparticles after separation with phase transfer.

Analytical Methods for Nanomaterial Determination in Biological Matrices

Nanomaterials are materials in which at least one of the three dimensions ranges from 1 to 100 nm, according to the International Organization for Standardization (ISO). Nanomaterials can be categorized according to various parameters, such as their source, their shape, and their origin. Their increasing use in industrial settings, everyday items, electronic devices, etc. poses an environmental and biological risk that needs to be assessed and appropriately addressed. The development of reliable analytical methods for both characterization and quantification of nanomaterials in various matrices is essential. This review summarized the recent trends in analytical methodologies for the characterization and determination of nanoparticles in biological matrices.

Detection, Identification and Size Distribution of Silver Nanoparticles (AgNPs) in Milk and Migration Study for Breast Milk Storage Bags

The engineered silver nanoparticles (AgNPs) have been widely used in various food contact materials (FCMs) based on their antibacterial properties. This widespread use of nanosilver has, however, increased the risk of exposure of AgNPs to human due to their migration from FCMs causing a potential hazard present in foods. Therefore, it is important to establish a reliable and practical method for the detection of AgNPs in food matrices to support risk assessment on AgNPs exposure. Taking the examples of milk and AgNPs-containing breast milk storage bags, this study established an approach for size characterization and quantification of AgNPs in milk and evaluated the relevant silver migration, based on enzymatic digestion and the analysis by asymmetric flow field–flow fractionation (AF4) hyphenated with inductively coupled plasma mass spectrometry (ICP-MS) and single particle inductively coupled plasma mass spectrometry (SP-ICP-MS). No migration of AgNPs was found from breast milk storage bags under various simulated storage conditions as well as extreme scenarios. The suitability and reliability of this method were also validated by the determination of multiple parameters, including accuracy, repeatability, limit of detection (LOD), limit of quantification (LOQ), and recovery, for AF4-ICP-MS and SP-ICP-MS, respectively, with good and overall acceptable evaluation results obtained for all. The established and validated approach was demonstrated to be suitable for the characterization and quantitation of AgNPs in milk as well as the analysis of their migration from breast milk storage bags.

Synthesis Monitoring, Characterization and Cleanup of Ag-Polydopamine Nanoparticles Used as Antibacterial Agents with Field-Flow Fractionation

Advances in nanotechnology have opened up new horizons in nanomedicine through the synthesis of new composite nanomaterials able to tackle the growing drug resistance in bacterial strains. Among these, nanosilver antimicrobials sow promise for use in the treatment of bacterial infections. The use of polydopamine (PDA) as a biocompatible carrier for nanosilver is appealing; however, the synthesis and functionalization steps used to obtain Ag-PDA nanoparticles (NPs) are complex and require time-consuming cleanup processes. Post-synthesis treatment can also hinder the stability and applicability of the material, and dry, offline characterization is time-consuming and unrepresentative of real conditions. The optimization of Ag-PDA preparation and purification together with well-defined characterization are fundamental goals for the safe development of these new nanomaterials. In this paper, we show the use of field-flow fractionation with multi-angle light scattering and spectrophotometric detection to improve the synthesis and quality control of the production of Ag-PDA NPs. An ad hoc method was able to monitor particle growth in a TLC-like fashion; characterize the species obtained; and provide purified, isolated Ag-PDA nanoparticles, which proved to be biologically active as antibacterial agents, while achieving a short analysis time and being based on the use of green, cost-effective carriers such as water.

FFF-based high-throughput sequence shortlisting to support the development of aptamer-based analytical strategies

Aptamers are biomimetic receptors that are increasingly exploited for the development of optical and electrochemical aptasensors. They are selected in vitro by the SELEX (Systematic Evolution of Ligands by Exponential Enrichment) procedure, but although they are promising recognition elements, for their reliable applicability for analytical purposes, one cannot ignore sample components that cause matrix effects. This particularly applies when different SELEX-selected aptamers and related truncated sequences are available for a certain target, and the choice of the aptamer should be driven by the specific downstream application. In this context, the present work aimed at investigating the potentialities of asymmetrical flow field-flow fractionation (AF4) with UV detection for the development of a screening method of a large number of anti-lysozyme aptamers towards lysozyme, including randomized sequences and an interfering agent (serum albumin). The possibility to work in native conditions and selectively monitor the evolution of untagged aptamer signal as a result of aptamer-protein binding makes the devised method effective as a strategy for shortlisting the most promising aptamers both in terms of affinity and in terms of selectivity, to support subsequent development of aptamer-based analytical devices.

Determination of metallic nanoparticles in biological samples by single particle ICP-MS: a systematic review from sample collection to analysis

A systematic review of the use of single particle ICP-MS to analyse engineered nanomaterials (ENMs) in biological samples (plants, animals, body fluids) has highlighted that efforts have focused on a select few types of ENMs (e.g., Ag and TiO₂) and there is a lack of information for some important tissues (e.g., reproductive organs, skin and fatty endocrine organs). The importance of sample storage is often overlooked but plays a critical role. Careful consideration of the ENM and matrix composition is required to select an appropriate protocol to liberate ENMs from a tissue whilst not promoting the transformation of them, or genesis of new particulates. A 'one size fits all' protocol, applicable to all possible types of ENM and biological matrices, does not seem practical. However, alkaline-based extractions would appear to show greater promise for wide applicability to animal tissues, although enzymatic approaches have a role, especially for plant tissues. There is a lack of consistency in metrics reported and how they are determined (e.g. size limit of detection, and proportions of recovery), making comparison between some studies more difficult. In order to establish standardised protocols for regulatory use, effort is needed to: develop certified reference materials, achieve international agree on nomenclature and the use of control samples, and to create a decision tree to help select the best sample preparation for the type of tissue matrix.

Titanium dioxide nanoparticles assessment in seaweeds by single particle inductively coupled plasma - Mass spectrometry

In this study, a first attempt for isolating and determining (characterising) background levels of titanium dioxide nanoparticles (TiO₂ NPs) in seaweed has been developed by using single particle inductively coupled plasma - mass spectrometry (SP-ICP-MS). Seaweeds were processed using an optimised ultrasound assisted extraction (UAE) procedure based on tetramethylammonium hydroxide (TMAH) before dilution and SP-ICP-MS analysis. The effect of the TMAH percentage in the extracting solution, as well as the volume of extracting solution and sonication (extraction) time, has been fully assessed. Additional experiments also showed that TiO₂ NPs were quantitatively released from the seaweed matrix in one UAE step since the analysis of residues gave TiO₂ NPs concentrations lower than the limit of quantification (LOQ) of the method. Validation of the method with 50 and 100 nm TiO₂ NPs (10 μg L^-1 as Ti) showed good analytical recovery (115% and 112% for 50 and 100 nm TiO₂ NPs, respectively), and good reproducibility (2% for size and 16% for number of TiO₂ NPs). Experiments regarding TiO₂ NPs stability showed that the extracted NPs are stable since there were not changes on the number of TiO₂ NPs and TiO₂ NPs size distributions when exposing TiO₂ NPs standards to the optimised extractive conditions.

Cloud point extraction (CPE) combined with single particle -inductively coupled plasma-mass spectrometry (SP-ICP-MS) to analyze and characterize nano-silver sulfide in water environment

Silver Nanoparticles (Ag-NPs), an emerging type of pollutant, might occur various physical and chemical transformations, which would affect its environmental fate, transformation and biological effects. Sulfurization is the most common conversion of Ag-NPs, accompanied by the formation of nano-silver sulfide (Ag₂S-NPs). The method of Ag₂S-NPs analysis and characterization is of great significance for assessing the environmental risks of Ag. In this study, cloud point extraction (CPE) and Single Particle-Inductively Coupled Plasma-Mass Spectrometry (SP-ICP-MS) were used in combination to establish a simple and reliable analysis method to quantify Ag₂S-NPs in water, with the morphology unchanged. Non-Ag₂S-NPs were dissociated into Ag⁺ firstly, and Ag₂S-NPs and Ag⁺ were separated by CPE, followed by SP-ICP-MS analysis. The extraction rate based on particle number concentration was between (76.19 ± 0.56) % to (106.35 ± 0.00) % in environmental waters. Compared with the (76.96 ± 2.18) nm Ag₂S-NPs spiked, the particle size extracted increased slightly with (94.19 ± 2.72) nm- (97.25 ± 0.22) nm as the large-size Ag₂S-NPs originally presented in waters, instead of agglomeration. This method could be generally applicable to the analysis of Ag₂S-NPs in waters, and provide ideas for other metal sulfide nanoparticles (MS-NPs), which has certain significance.

Characterization of Glioblastoma Cancer Stem Cells Sorted by Sedimentation Field-Flow Fractionation Using an Ultrahigh-Frequency Range Dielectrophoresis Biosensor

Cancer stem cells (CSCs) appear to be an essential target for cancer therapies, in particular, in brain tumors such as Glioblastoma. Nevertheless, their isolation is made difficult by their low content in culture or tumors (<5% of the tumor mass) and is essentially based on the use of fluorescent or magnetic labeling techniques, increasing the risk of differentiation induction. The use of label-free separation methods such as sedimentation field-flow fractionation (SdFFF) is promising, but it becomes necessary to consider a coupling with a detection and characterization method for future identification and purification of CSCs from patient-derived tumors. In this study, we demonstrate for the first time the capability of using an ultrahigh-frequency range dielectrophoresis fluidic biosensor as a detector. This implies an important methodological adaptation of SdFFF cell sorting by the use of a new compatible carrier liquid DEP buffer (DEP-B). After SdFFF sorting, subpopulations derived from U87-MG and LN18 cell lines undergo biological characterization, demonstrating that using DEP-B as a carrier liquid, we sorted by SdFFF subpopulations with specific differentiation characteristics: F1 = differentiated cells/F2 = CSCs. These subpopulations presented high-frequency crossover (HFC) values similar to those measured for standard differentiated (around 110 MHz) and CSC (around 80 MHz) populations. This coupling appeared as a promising solution for the development of an online integration of these two complementary label-free separation/detection technologies.

AF4-UV-ICP-MS for detection and quantification of silver nanoparticles in seafood after enzymatic hydrolysis

A method based on asymmetric flow field-flow fractionation (AF4) coupled to ultraviolet-visible (UV-vis) spectroscopy and inductively coupled plasma mass spectrometry (ICP-MS) has been developed for silver nanoparticles (Ag NPs) detection and quantification in bivalve molluscs. Samples were pre-treated using a conventional enzymatic (pancreatin and lipase) hydrolysis procedure (37 °C, 12 h). AF4 was performed using a regenerated cellulose (RC) membrane (10 kDa, 350 μm spacer) and aqueous 5 mM Tris-HCl pH = 7.4 as carrier. AF4 separation was achieved with a program that included a focusing step with tip and focus flows of 0.20 and 3.0 mL min^-1, respectively, and an injection time of 4.0 min. Elution of different size fractions was performed using a cross flow of 3.0 mL min^-1 for 15 min, followed by linear cross flow decrease for 7.5 min, and a washing step for 9.4 min with no cross flow. Several bivalve molluscs (clams, oysters and variegated scallops) were analysed for total Ag content (ICP-MS after microwave assisted acid digestion), and for Ag NPs by the method presented here. Results show that Ag NPs are detected at the same elution time than proteins (UV monitoring at 280 and 405 nm), which suggests a certain interaction occurred between Ag NPs with proteins in the enzymatic extracts. AF4-UV-ICP-MS fractograms also suggest different Ag NPs size distributions for selected samples. Membrane recoveries, determined by peak area comparison of fractograms with and without application of cross flow, were within the 49-121% range. Confirmation of the presence Ag NPs in the investigated enzymatic extracts was demonstrated by SEM after an oxidative pre-treatment based on hydrogen peroxide and microwave irradiation.

A simple analytical methodology for platinum nanoparticles control in complex clinical matrices via SP-ICP-MS

A simple method based on the use of inductively coupled plasma mass spectrometry in single particle mode (SP-ICP-MS) has been proposed, for the first time, for the study of platinum nanoparticles (PtNPs) in complex clinical matrices such as human urine and blood serum. Critical parameters for signal acquisition were optimized to achieve a correct and simultaneous sizing and counting (particle-based in particles L^-1 and mass-based in ng L^-1) of 50 and 70 nm PtNPs. Different reagents, as tetramethylammonium hydroxide (TMAH) and/or Triton X-100, and concentrations have been tested to ensure an adequate stabilization and extraction of PtNPs. Finally, TMAH at 1% is demonstrated to be the best reagent to extract the NPs guaranteeing their integrity. No heating or any additional treatment was required, which allows sample preparation, and the overall process, to be simple and fast. Good precisions for size (2% RSD) and particle number and mass concentrations (<1% RSD), and limits of detection of 21.6 nm and 1.9 × 10⁵ particles L^-1 were reported. The influence of matrix on the determination of PtNP sizes and number- and mass-based concentrations was evaluated. Particle sizes were in all cases in accordance with values determined by TEM or SEM, whereas recoveries of PtNPs in terms of concentration ranged between 92 and 101%. The stability of PtNP characteristics after 24 h was specifically studied in human urine spiked with PtNPs. Statistically significant differences were only reported for the particle number concentrations of 50 nm PtNPs in female urine samples. The present work will be relevant to understand the behaviour of PtNPs in body fluids and to take appropriate actions in future (pre)clinical trials.

In-house validation of AF4-MALS-UV for polystyrene nanoplastic analysis

The suitability of asymmetric flow field-flow fractionation (AF4) coupled on-line to multi-angle light scattering (MALS) and UV diode array (UV-DAD) detectors was tested to simultaneously detect polystyrene nanoplastics (PS-NPs) and collect information about their size. A mixture of four sizes of PS-NPs at 20 nm, 60 nm, 100 nm and 200 nm was prepared by dilution with ultrapure deionized water and gentle mixing and was used as test sample for a polydisperse nanoplastic system. The AF4 method separated each single size of PS-NP mixture in a total time of 48 min by using 0.2% SDS as carrier solution. Then, the PS-NPs were sized and detected by following their MALS (90° scattering angle) and UV (215 nm) signals. Quality control (QC) performances as linearity, between-day repeatability, resolution factor, trueness/recovery, limit of detection (LoD) and selectivity were calculated, according to the ISO/TS 21362:2018. Method uncertainty was calculated following the ISO/TS 21748:2002 by summing between-day repeatability and trueness or recovery uncertainties. In-house validation results demonstrated good peak resolution and selectivity, R² linearity of 0.998-0.999 in the range 50-1000 μg/mL, between-day repeatability of ca. 10%, trueness/recovery above 90% and LoD between 15 μg/mL (20 nm) and 33 μg/mL (200 nm). Expanded uncertainty was 16.1-17.9% on PS-NP size between 60 and 200 nm and 10.4-14.7% on PS-NP concentration between 100 and 1000 μg/mL. Compared to traditional single-technique analysis, this hyphenated method offers great promise for separating and analysing diverse populations of PS-NPs present in real matrices, which is critical for health and risk assessment studies and any regulatory action.

Characterisation of selenium and tellurium nanoparticles produced by Aureobasidium pullulans using a multi-method approach

Aureobasidium pullulans was grown in liquid culture media amended with selenite and tellurite and selenium (Se) and tellurium (Te) nanoparticles (NPs) were recovered after 30 d incubation. A separation method was applied to recover and characterise Se and Te NPs by asymmetric flow field flow fractionation (AF4) with online coupling to multi-angle light scattering (MALS), ultraviolet visible spectroscopy (UV-Vis), and inductively coupled plasma mass spectrometry (ICP-MS) detectors. Additional characterisation data was obtained from transmission electron microscopy (TEM), and dynamic light scattering (DLS). Solutions of 0.2% Novachem surfactant and 10 mM phosphate buffer were compared as mobile phases to investigate optimal AF4 separation and particle recovery using Se-NP as a model sample. 88% recovery was reported for 0.2% Novachem solution, compared with 50% recovery for phosphate buffer. Different crossflow (C_flow) rates were compared to further investigate optimum separation, with recoveries of 88% and 30% for Se-NPs, and 90% and 29% for Te-NPs for 3.5 mL min^-1 and 2.5 mL min^-1 respectively. Zeta-potential (ZP) data suggested higher stability for NP elution in Novachem solution, with increased stability attributed to minimised NP-membrane interaction due to PEGylation. Detection with MALS showed monodisperse Se-NPs (45-90 nm) and polydisperse Te-NPs (5-65 nm).Single particle ICP-MS showed mean particle diameters of 49.7 ± 2.7 nm, and 135 ± 4.3 nm, and limit of size detection (LOSD) of 20 nm and 45 nm for Se-NPs and Te-NPs respectively. TEM images of Se-NPs and Te-NPs displayed a spherical morphology, with the Te-NPs showing a clustered arrangement, which suggested electrostatic attraction amongst neighbouring particles. Particle hydrodynamic diameters (d_H) measured with dynamic light scattering (DLS) further suggested monodisperse Se-NPs and polydisperse Te-NPs distributions, showing good agreement with AF4-MALS for Se-NPs, but suggests that the R_g obtained from AF4-MALS for Te-NP was unreliable. The results demonstrate a complementary application of asymmetric flow field-flow fractionation (AF4), ICP-MS, light scattering, UV-Vis detection, and microscopic techniques to characterise biogenic Se and Te NPs.