Sandwich-type electrochemical immunosensor for CEA detection using magnetic hollow Ni/C@SiO2 nanomatrix and boronic acid functionalized CPS@PANI@Au probe

Point-of-Care Detection of Carcinoembryonic Antigen (CEA) Using a Smartphone-Based, Label-Free Electrochemical Immunosensor with Multilayer CuONPs/CNTs/GO on a Disposable Screen-Printed Electrode

In order to identify carcinoembryonic antigen (CEA) in serum samples, an innovative smartphone-based, label-free electrochemical immunosensor was created without the need for additional labels or markers. This technology presents a viable method for on-site cancer diagnostics. The novel smartphone-integrated, label-free immunosensing platform was constructed by nanostructured materials that utilize the layer-by-layer (LBL) assembly technique, allowing for meticulous control over the interface. Detection relies on direct interactions without extra tagging agents, where ordered graphene oxide (GO), carbon nanotubes (CNTs), and copper oxide nanoparticles (CuONPs) were sequentially deposited onto a screen-printed carbon electrode (SPCE), designated as CuONPs/CNTs/GO/SPCE. This significantly amplifies the electrochemical signal, allowing for the detection of low concentrations of target molecules of CEA. The LBL approach enables the precise construction of multi-layered structures on the sensor surface, enhancing their activity and optimizing the electrochemical performance for CEA detection. These nanostructured materials serve as efficient carriers to significantly increase the surface area, conductivity, and structural support for antibody loading, thus improving the sensitivity of detection. The detection of carcinoembryonic antigen (CEA) in this electrochemical immunosensing transducer is based on a decrease in the current response of the [Fe(CN)6]3-/4- redox probes, which occurs in proportion to the amount of the immunocomplex formed on the sensor surface. Under the optimized conditions, the immunosensor exhibited good detection of CEA with a linear range of 0.1-5.0 ng mL-1 and a low detection limit of 0.08 ng mL-1. This label-free detection approach, based on signal suppression due to immunocomplex formation, is highly sensitive and efficient for measuring CEA levels in serum samples, with higher recovery ranges of 101% to 112%, enabling early cancer diagnosis. The immunosensor was successfully applied to determine CEA in serum samples. This immunosensor has several advantages, including simple fabrication, portability, rapid analysis, high selectivity and sensitivity, and good reproducibility with long-term stability over 21 days. Therefore, it has the potential for point-of-care diagnosis of lung cancer.

A dual-mode homogeneous electrochemical-colorimetric biosensing sensor for carcinoembryonic antigen detection based on a microfluidic paper-based analysis device

Dual-mode-based sensors have drawn a lot of interest due to their high accuracy and sensitivity compared to single-response systems. A simple electrochemical and colorimetric dual-mode sensor based on enzyme-linked immunosorbent assay (ELISA), without complex electrode surface modification, was developed for accurate and sensitive detection of carcinoembryonic antigen (CEA). The target CEA is recognized by an antibody coupled to horseradish peroxidase (HRP), which then oxidizes the substrate 3,3',5,5'-tetramethylbenzidine (TMB) to generate both a colorimetric and an electrochemical signal. A paper-based analysis device (μPAD) with dual-mode homogeneous sensing microfluidic was created; three paper-based detection areas for colorimetric testing, and a two-electrode embedded detection area for electrochemical testing. When applying colorimetric analysis technology, the linear range of CEA detection is 0.6-40 ng mL-1, and the limit of detection (LOD) is 0.2 ng mL-1. The linear range is 0.1-40 ng mL-1 and the LOD is 0.03 ng mL-1 by applying electrochemical analysis. The visibility and intuitiveness of colorimetry provide a reference for higher sensitivity and quick response of the electrochemical method. A smartphone application (APP) was also developed to realize the dual extraction of colorimetric signals. The colorimetric detection system based on ELISA can provide a new path for the development of electrochemical sensing and makes it have inherent self-verification and self-correction functions and is expected to provide more reliable and accurate detection results.

Label-free electrochemical biosensor based on dual amplification of gold nanoparticles and polycaprolactones for CEA detection

Carcinoembryonic Antigen (CEA), an acidic glycoprotein with human embryonic antigen properties, is found on the surface of cancer cells that have differentiated from endodermal cells. This paper presents a label-free electrochemical immunoassay for the dual amplification detection of CEA using gold nanoparticles loaded with polypyrrole polydopamine (Au/PPy-PDA) and polymerized polycaprolactone (Ng-PCL) prepared by ring-opening polymerization (ROP). First, the composite Au/PPy-PDA was adhered to the electrode surface. Then, gold nanoparticles form a Au-S bond with the sulfhydryl group in Apt1 to secure it on the electrode surface. Subsequently, the non-specific binding sites on the electrodes surface are closed by bovine serum albumin (BSA). Next, CEA is dropped onto the electrode surface, which is immobilized by antigen-antibody specific recognition, and the carboxyl-functionalized Apt2 forms a "sandwich structure" of antibody-antigen-antibody by specific recognition. Polymeric Ng-PCL is adhered to the electrode surface, leading to an increase in the electrochemical impedance signal, resulting in a complete chain of signal analysis. Finally, the response signal is detected by electrochemical impedance spectroscopy (EIS). Under optimal experimental conditions, the method has the advantages of high sensitivity and wide linear range (1 pg mL-1∼100 ng mL-1), and the lower limit of detection (LOD) is 0.234 pg mL-1. And it has the same high sensitivity, selectivity and interference resistance for the real samples detection. Thus, it provides a new way of thinking about biomedical and clinical diagnosis.

Structure Remodeling Strategy for Open-Cage NiFe@Fe-bis-PBA with Enhanced Peroxidase-like Activity To Monitor Tumor Markers

The inherent metal elements and structures of Prussian blue analogue (PBA) nanozymes have restricted their enzyme-mimicking activity. Therefore, the rational regulation of PBA nanozymes to improve their catalytic activity is highly desirable for biosensing applications. Herein, we propose a structure remodeling strategy to construct an open-cage Fe PBA-anchored NiFePBA (NiFe@Fe bis-PBA) nanozyme with significantly enhanced enzyme-mimicking activity. The formation process and mechanism for this bis-PBA nanozyme were studied in detail. Specifically, a cubic NiFePBA precursor was first synthesized and modified with polyvinylpyrrolidone (PVP). With the aid of hydrochloric acid, the added potassium ferricyanide was reduced by PVP and re-coordinated on the surface of NiFePBA to form the NiFe@Fe bis-PBA nanozyme with a special open-cage core-shell structure. The resultant NiFe@Fe bis-PBA nanozyme was further exploited to immobilize secondary antibodies, serving as a novel signal probe for developing highly sensitive electrochemical immunosensors for monitoring tumor markers. The constructed electrochemical immunosensor possesses a very wide linear range of 0.005-100 ng/mL and a low detection limit of 0.89 pg/mL for alpha-fetoprotein with high specificity and acceptable reproducibility and stability. This work offers a general and promising strategy for remodeling PBA nanozymes with a very favorable structure and metal element distribution, which enhances their enzyme-mimicking properties for applications in different fields.

Synthesis of flower-like ZnO nanoparticles for label-free point of care detection of carcinoembryonic antigen

In this work, flower-like ZnO nanoparticles (ZnONPs) were synthesized using zinc nitrate (Zn(NO3)2 6H2O) as a precursor with KOH. The morphology of the ZnONPs was controlled by varying the synthesis temperature at 50, 75 and 95 °C. The morphology and structure of ZnONPs were characterized using Scanning Electron Microscopy, and X-Ray Diffraction and Brunauer-Emmett Teller analysis. ZnONPs were successfully synthesized by a simple chemical precipitation method. A synthesis temperature of 75 °C produced the most suitable flower-like ZnONPs, which were combined with graphene nanoplatelets to develop a label-free electrochemical immunosensor for the detection of the colon cancer biomarker carcinoembryonic antigen in human serum. Under optimum conditions, the developed immunosensor showed a linear range of 0.5-10.0 ng mL-1 with a limit of detection of 0.44 ng mL-1. The label-free electrochemical immunosensor exhibited good selectivity, reproducibility, and repeatability, and recoveries were excellent. The immunosensor is used with a Near-Field Communication potentiostat connected to a smartphone to facilitate point-of-care cancer detection in low-resource locations.

Progress and Outlook on Electrochemical Sensing of Lung Cancer Biomarkers

Electrochemical biosensors have emerged as powerful tools for the ultrasensitive detection of lung cancer biomarkers like carcinoembryonic antigen (CEA), neuron-specific enolase (NSE), and alpha fetoprotein (AFP). This review comprehensively discusses the progress and potential of nanocomposite-based electrochemical biosensors for early lung cancer diagnosis and prognosis. By integrating nanomaterials like graphene, metal nanoparticles, and conducting polymers, these sensors have achieved clinically relevant detection limits in the fg/mL to pg/mL range. We highlight the key role of nanomaterial functionalization in enhancing sensitivity, specificity, and antifouling properties. This review also examines challenges related to reproducibility and clinical translation, emphasizing the need for standardization of fabrication protocols and robust validation studies. With the rapid growth in understanding lung cancer biomarkers and innovations in sensor design, nanocomposite electrochemical biosensors hold immense potential for point-of-care lung cancer screening and personalized therapy guidance. Realizing this goal will require strategic collaboration among material scientists, engineers, and clinicians to address technical and practical hurdles. Overall, this work provides valuable insight for developing next-generation smart diagnostic devices to combat the high mortality of lung cancer.

Cubic Na0.5Bi0.5TiO3 nanoperovskite significantly expands the application of sensitive immunosensor for the detection of carcinoembryonic antigen

Nanosized sodium bismuth perovskite titanate (NBT) was synthesized and first used as the electrochemical immune sensing platform for the sensitive detection of carcinoembryonic antigen (CEA). Gold nanoparticles (Au NPs) grew on the surface of NBT through forming Au-N bond to obtain Au@NBT, and a label-free electrochemical immunosensor was proposed using Au@NBT as an immunosensing recognizer towards CEA. The well-ordered crystal structure of NBT was not changed at all after the modification of Au NPs outside, but significantly improved the conductivity, catalytic activity, and biocompatibility of the Au@NBT-modified electrode. The unique cubic crystal nanostructure of NBT offered a large active area for both Au NP modification and the subsequent immobilization of biomolecules over the electrode surface, triggering the effective generation of promising properties of the proposed Au@NBT-based electrochemical immunosensor. As expected, favorable detection performances were achieved using this immunosensor towards CEA detection, where a good linear relationship between the current response and CEA concentration was obtained in the concentration range 10 fg mL-1 to 100 ng mL-1 with a low detection limit (LOD) of 13.17 fg mL-1. Also, the significantly enhanced selectivity, and stability guaranteed the promising electrochemical properties of this immunosensor. Furthermore, the analysis of real serum samples verified the high feasibility of this new method in clinical CEA detection. This work opens a new window for the application of nanoperovskite in the early detection of CEA.

Novel immunosensor based on electrochemiluminescence inner filter effect and static quenching between fibrillary Ag-MOGs and SiO2@PANI@AuNPs for enabling the sensitive detection of neuron-specific enolase

Metal-organic gels (MOGs) are unique supramolecular gels that are convenient to synthesize. In this work, a cathodic electrochemiluminescence (ECL) system based on Ag-MOGs as a luminophore and K2S2O8 as a co-reactor was developed. The ECL spectrum of the Ag-MOGs overlapped significantly with the strong UV-Vis spectrum of the SiO2@PANI@AuNPs, which effectively quenched the ECL luminescence of the Ag-MOGs. Relying on the inner filter effect between Ag-MOGs and SiO2@PANI@AuNPs, a novel ECL-IFE immunosensor was developed for the detection of neuron-specific enolase (NSE). Under optimal conditions, the ECL signal of the immunosensor displayed excellent linearity over the NSE concentration range of 10 fg/mL-100 ng/mL. The limit of detection (LOD) was 2.6 fg/mL (S/N = 3) with a correlation coefficient R2 of 0.9975. The ECL immunosensor also exhibited excellent stability and reproducibility for the detection of NSE. The results reported provide a feasible concept for the development analytical methods for the detection of other clinically relevant biomarkers.

Co, Fe Dual-Doped MoS2 Nanosheets on Polypyrrole Microtubes as Effective Peroxidase Mimics for Glutathione Sensing

Heteroatom doping is considered an effective way to enhance the catalytic activity of MoS2 nanosheets (NSs). In the paper, dual-metal doping was proposed to incorporate Fe and Co into hierarchical MoS2 ultrathin NSs, which grew directly on polypyrrole microtubes (Fe, Co-MoS2@PPy), for the enhanced enzyme-like catalytic reaction. The particular hollow tubular structure realized effective electron transfer. The doped Fe and Co tuned the electronic architecture of the MoS2 NSs to enhance the enzyme-like catalytic activity. The abundant exposed void spaces facilitated ion diffusion/penetration between the PPy interlayer and Fe-Co doped MoS2 shell, leading to heterostructured synergistic effects. Therefore, the synthesized Fe and Co-MoS2@PPy composites showed remarkable catalytic activity. The high catalytic efficiency of Fe and Co-MoS2@PPy was confirmed with the reaction of tetramethylbenzidine (TMB) and H2O2 for visible detection. The blue color disappeared after adding glutathione (GSH). Thus, this procedure was used as a convenient way to detect GSH with a detection limit of 0.76 μM. The dual-metal-doped strategy was confirmed to improve the performance of MoS2 nanocomposites and could be used as a promising matrix for other applications, such as electrochemical energy conversion, medical diagnosis, and others.

Magnetic copper silicate and boronic acid-conjugated AuNCs@keratin-based electrochemical/fluorescent dual-sensing for carcinoembryonic antigen

Boronic Acid Sensitivity, selectivity, and reliability are of great importance for tumor diagnosis. Herein, we proposed a novel electrochemical and fluorescent dual-sensing strategy to detect carcinoembryonic antigens (CEA). To this end, monodisperse spindle-like magnetic copper silicate (FeOx@C@CS) was prepared with multiple active sites to immobilize the CEA antibody. Moreover, magnetic properties improved the anti-interference ability and sensitivity to endow the assay for complex samples. In addition, boronic acid-conjugated gold nanocluster (AuNCs@keratin-BA) was prepared as an electrochemical and fluorescent dual-signal indicator. Thus, the sandwich structure of FeOx@C@CS/CEA/AuNCs@keratin-BA was formed for electrochemical/fluorescent dual-modality assay. Under optimal conditions, the quantitation range of 12.5 fg mL-1-37.5 pg mL-1 and detection limit of 4.3 fg mL-1 were obtained for the electrochemical strategy. The fluorescence detection owned the linear range of 0.05 pg mL-1-7.5 pg mL-1 with a detection limit of 0.025 pg mL-1. Dual-modality assay improved the accuracy and efficiency of CEA detection to meet the requirement of tumor diagnosis, while chemical identification and signal transduction lay an important foundation for engineering advanced nanomaterials for clinical applications.

Magnetically Controlled and Addressable Photoelectrochemical Sensor Array with Self-Calibration for the Label-Free Detection of Amyloid β-Proteins

A label-free addressable photoelectric immunosensor array was designed for the detection of amyloid β-proteins based on magnetic separation and self-calibration strategies. In this paper, Na2Ti6O13 with a flower-like morphology was prepared by the hydrothermal method; after continuously combining Fe3O4 and CdS, it was endowed with magnetism and better photoelectric activity. Subsequently, a series of reactions occurred in the solution, and the magnetic separation method was used to enrich the target. On the other hand, the ITO glass was separated into eight sites (2 × 4) using magnets, and a light shield was utilized to prevent light exposure, resulting in addressable and continuous detection. After the uniform preparation of magnetic photoelectric materials and precise control of testing conditions, the relative errors among different sites have been effectively reduced. Moreover, incorporating a self-calibration strategy has allowed the sensor array to achieve greater accuracy. The proposed photoelectrochemical biosensor exhibits a good relationship with amyloid β-protein ranging from 0.01 to 100 ng mL-1 with a limit of detection of 1.1 pg mL-1 and exhibits excellent specificity, reproducibility, and stability.

Theranostic signature of tumor-derived exosomes in cancer

Cancer is the most challenging global health crisis. In the recent times, studies on extracellular vesicles (EVs) are adding a new chapter to cancer research and reports on EVs explores cancer in a new dimension. Exosomes are a group of subpopulations of EVs. It originates from the endosomes and carries biologically active molecules to the neighboring cells which in turn transforms the recipient cell activity. In general, it plays a role in cellular communication. The correlation between exosomes and cancer is fascinating. Tumor-derived exosomes (TEXs) play a dynamic role in cancer progression and are associated with uncontrolled cell growth, angiogenesis, immune suppression, and metastasis. Its molecular cargo is an excellent source of cancer biomarkers. Several advanced molecular profiling approaches assist in exploring the TEXs in depth. This paves the way for a strong foundation for identifying and detecting more specific and efficient biomarkers. TEXs are also gaining importance in scientific society for its role in cancer therapy and several clinical trials based on TEXs is a proof of its significance. In this review, we have highlighted the role of TEXs in mediating immune cell reprogramming, cancer development, metastasis, EMT, organ-specific metastasis, and its clinical significance in cancer theranostics. TEXs profiling is an effective method to understand the complications associated with cancer leading to good health and well-being of the individual and society as a whole.

Impedimetric aptasensor based on MOF based composite for measuring of carcinoembryonic antigen as a tumor biomarker

In this research, gold nanoparticle (GNPs)-modified metal-organic framework/reduced graphene oxide (MOF(801)/rGO) hybrid was employed to design a new aptasensor for carcinoembryonic antigen (CEA) quantification in biological sample. The sensing ability of the electrode for CEA biomarker was examined with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry procedures. Besides, CEA was electrochemically quantified by the EIS method. With respect to the high surface-to-volume ratio of MOF(801) and the good electron transfer ability of rGO, the proposed sensor displayed notable sensitivity and reliability in the CEA analysis. The derived electrode showed an appreciable detection limit of 0.8 pg L-1 using EIS protocol. In addition, the present aptasensor revealed diverse advantages including anti-interference property, wide linear range (0.0025-0.25 ng L-1), convenience and high efficiency toward CEA quantification. More importantly, the performance of the suggested assay remains unchanged in analysis of CEA in body fluids. The established assay demonstrates that the suggested biosensor is a promising device in clinical diagnosis.

Highly Sensitive Detection of Formaldehyde by Laser-Induced Graphene-Coated Silver Nanoparticles Electrochemical Sensing Electrodes

Formaldehyde (HCHO) poses a grave threat to human health because of its toxicity, but its accurate, sensitive, and rapid detection in aqueous solutions remains a major challenge. This study proposes a novel electrochemical sensor composed of a graphene-based electrode that is prepared via laser induction technology. The precursor material, polyimide, is modified via the metal ion exchange method, and the detective electrode is coated with graphene and silver nanoparticles. And the special structure of graphene-coated Ag was demonstrated using scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD), Fourier transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS) results show that graphene provides more sites for Ag NRs to be exposed and increases the surface area of contact between the solution and the detection object. In addition, differential pulse voltammetry (DPV) analysis exhibits high linearity over the HCHO concentration range from 0.05 to 5 μg/mL, with a detection limit of 0.011 μg/mL (S/N = 3). The Ag NPs in the electrochemical reaction will adsorb the intermediate •CO and •OH, catalyze their combination, and finally convert to CO2 and H2O, respectively. A microdetection device, specially designed for use with commercial micro-workstations, is employed to fully demonstrate the practical application of the electrode, which paves a way for developing formaldehyde electrochemical sensors.

Biosensors with Boronic Acid-Based Materials as the Recognition Elements and Signal Labels

It is of great importance to have sensitive and accurate detection of cis-diol-containing biologically related substances because of their important functions in the research fields of metabolomics, glycomics, and proteomics. Boronic acids can specifically and reversibly interact with 1,2- or 1,3-diols to form five or six cyclic esters. Based on this unique property, boronic acid-based materials have been used as synthetic receptors for the specific recognition and detection of cis-diol-containing species. This review critically summarizes the recent advances with boronic acid-based materials as recognition elements and signal labels for the detection of cis-diol-containing biological species, including ribonucleic acids, glycans, glycoproteins, bacteria, exosomes, and tumor cells. We also address the challenges and future perspectives for developing versatile boronic acid-based materials with various promising applications.

Application of Metal-Based Nanomaterials in In Vitro Diagnosis of Tumor Markers: Summary and Prospect

Cancer, which presents with high incidence and mortality rates, has become a significant health threat worldwide. However, there is currently no effective solution for rapid screening and high-quality treatment of early-stage cancer patients. Metal-based nanoparticles (MNPs), as a new type of compound with stable properties, convenient synthesis, high efficiency, and few adverse reactions, have become highly competitive tools for early cancer diagnosis. Nevertheless, challenges such as the difference between the microenvironment of detected markers and the real-life body fluids remain in achieving widespread clinical application of MNPs. This review provides a comprehensive review of the research progress made in the field of in vitro cancer diagnosis using metal-based nanoparticles. By delving into the characteristics and advantages of these materials, this paper aims to inspire and guide researchers towards fully exploiting the potential of metal-based nanoparticles in the early diagnosis and treatment of cancer.

Electrochemiluminescence Immunosensors Based on ECL-RET Triggering between Mn SANE/PEI-Luminol and PtCu/h-MPF for Ultrasensitive Detection of CEA

In this paper, a novel donor-acceptor pair was creatively proposed based on the principle of electrochemiluminescence resonance energy transfer (ECL-RET): luminol immobilized on polyethyleneimine (PEI)-functionalized manganese-based single-atom nanozymes (Mn SANE/PEI-luminol, donor) and a PtCu-grafted hollow metal polydopamine framework (PtCu/h-MPF, acceptor). A quenched ECL immunosensor was constructed for the ultrasensitive analysis of carcinoembryonic antigen (CEA). Mn SANE, as an efficient novel coreaction accelerator with the outstanding performance of significantly activating H₂O₂ to produce large amounts of ROS, was further modified by the coreactant PEI, which efficiently immobilized luminol to form a self-enhanced emitter. As a result, the electron transport distance was effectively shortened, the energy loss was reduced, and luminol achieved a high ECL efficiency. More importantly, PtCu-grafted h-MPF (PtCu/h-MPF) was proposed as a novel quencher. The UV-vis spectra of PtCu/h-MPF partially overlap with the ECL spectra of Mn SANE/PEI-luminol, which can effectively trigger the ECL-RET behavior between the donor and the acceptor. The multiple quenching effect on Mn SANE/PEI-luminol was achieved, which significantly improved the sensitivity of the immunosensor. The prepared immunosensor exhibited good linearity in the concentration range of 10^-5 to 80 ng/mL. The results indicate that this work provides a new method for the early detection of CEA in clinical diagnosis.

The Applications of Electrochemical Immunosensors in the Detection of Disease Biomarkers: A Review

Disease-related biomarkers may serve as indicators of human disease. The clinical diagnosis of diseases may largely benefit from timely and accurate detection of biomarkers, which has been the subject of extensive investigations. Due to the specificity of antibody and antigen recognition, electrochemical immunosensors can accurately detect multiple disease biomarkers, including proteins, antigens, and enzymes. This review deals with the fundamentals and types of electrochemical immunosensors. The electrochemical immunosensors are developed using three different catalysts: redox couples, typical biological enzymes, and nanomimetic enzymes. This review also focuses on the applications of those immunosensors in the detection of cancer, Alzheimer's disease, novel coronavirus pneumonia and other diseases. Finally, the future trends in electrochemical immunosensors are addressed in terms of achieving lower detection limits, improving electrode modification capabilities and developing composite functional materials.

Highly Sensitive Immunosensing of Carcinoembryonic Antigen Based on Gold Nanoparticles Dotted PB@PANI Core-Shell Nanocubes as a Signal Probe

Herein, a method was developed for the sensitive monitoring of carcinoembryonic antigen (CEA) by gold nanoparticles dotted prussian blue@polyaniline core-shell nanocubes (Au NPs/PB@PANI). First, a facile low-temperature method was used to prepare the uniform PB@PANI core-shell nanocubes with the assistance of PVP, where PB acted as the electron transfer mediator to provide electrochemical signals, and the PANI with excellent conductivity and desirable chemical stability not only played the role of a protective layer to prevent etching of PB in basic media but also effectively improved electron transfer. Importantly, to further enhance the electrical conductivity and biocompatibility of PB@PANI and to further enhance the electrochemical signal and capture a large amount of Ab2, Au NPs were doped on the surface of PB@PANI to form Au NPs/PB@PANI nanocomposites. Subsequently, benefiting from the advantages of core-shell structure nanoprobes and gold-platinum bimetallic nanoflower (AuPt NF), a sandwich-type electrochemical immunosensor for CEA detection was constructed, which provided a wide linear detection range from 1.0 pg·mL-1 to 100.0 ng·mL-1 and a low detection limit of 0.35 pg·mL-1 via DPV (at 3σ). Moreover, it displayed a satisfactory result when the core-shell structure nanoprobe-based immunosensor was applied to determine CEA in real human serum samples.

A novel flower-shaped Ag@ZIF-67 chemiluminescence sensor for sensitive detection of CEA

In this work, a chemiluminescence (CL) aptasensor for sensitive carcinoembryonic antigen (CEA) detection was constructed based on the CL system of luminol-H₂O₂-NaOH. Magnetic carbon nanotubes (MCNTs), as the base material, was modified with CEA-aptamer and DNA1, and was combined with the novel flower-shaped Ag@ZIF-67 of modified with DNA2 through the principle of base complementary pairing. CEA combined with aptamer when it existed in the solution. At the same time, MCNTs was adsorbed at the bottom of the container under the influence of external magnetic field, and Ag@ZIF-67 enhanced the CL signal. The CL aptasensor demonstrated high selectivity and sensitivity for CEA in human serum sample with (1-4): a detection limit of 4.53 × 10^-3 ng/mL in case the detection range was 0.05-500 ng/mL. Furthermore, the proposed method had been shown great potential in cancer diagnosis.

Electrochemical Immunosensor Using Electroactive Carbon Nanohorns for Signal Amplification for the Rapid Detection of Carcinoembryonic Antigen

In this work, a novel sandwich-type electrochemical immunosensor was developed for the quantitative detection of the carcinoembryonic antigen, an important tumor marker in clinical tests. The capture antibodies were immobilized on the surface of a gold disk electrode, while detection antibodies were attached to redox-tagged single-walled carbon nanohorns/thionine/AuNPs. Both types of antibody immobilization were carried out through Au-S bonds using the novel photochemical immobilization technique that ensures control over the orientation of the antibodies. The electroactive SWCNH/Thi/AuNPs nanocomposite worked as a signal tag to carry out both the detection of carcinoembryonic antigen and the amplification of the detection signal. The current response was monitored by differential pulse voltammetry. A clear dependence of the thionine redox peak was observed as a function of the carcinoembryonic antigen concentration. A linear detection range from 0.001-200 ng/mL and a low detection limit of 0.1385 pg/mL were obtained for this immunoassay. The results showed that carbon nanohorns represent a promising matrix for signal amplification in sandwich-type electrochemical immune assays working as a conductive and binding matrix with easy and versatile modification routes to antibody and redox tag immobilization, which possesses great potential for clinical diagnostics of CEA and other biomarkers.

Ultrahighly Sensitive Sandwich-Type Electrochemical Immunosensor for Selective Detection of Tumor Biomarkers

Herein, a novel sandwich-type immunosensor was designed using Pt nanoparticle-decorated SnS₂ nanoplates (Pt@SnS₂) as a matrix and N,B-doped Eu MOF (N,B-Eu MOF) nanospheres as a signal amplifier. In Pt@SnS₂, Pt nanoparticles (NPs) enhance the surface electron transport capability and electrochemiluminescence (ECL) performance of SnS₂ nanoplates. The dual "antenna" effect of 5-boronoisophthalic acid (5-bop) and 5-nitroisophthalic acid (5-nop) enables the N,B-Eu MOFs to show very good ECL performance at the cathode. In the presence of the target carcinoembryonic antigen (CEA), the sandwich-type immunosensor provides specific immune responses, and the ECL signal of the immunosensor is greatly amplified by the signal probe N,B-Eu MOFs. In view of the above, the immunosensor was successfully applied for highly sensitive and selective detection of CEA with a detection limit of 0.06 pg·mL^-1. This sensor exhibits high sensitivity and specificity, excellent stability, good reproducibility, and good practicability in real human serum.

Preparation of a pH-responsive controlled-release electrochemical immunosensor based on polydopamine encapsulation for ultrasensitive detection of alpha-fetoprotein

To accomplish ultra-sensitive detection of alpha-fetoprotein(AFP), a novel electrochemical immunosensor using polydopamine-coated Fe₃O₄ nanoparticles (PDA@Fe₃O₄ NPs) as a smart label and polyaniline (PANI) and Au NPs as substrate materials has been created. The sensor has the following advantages over typical immunoassay technology: (1) The pH reaction causes PDA@Fe₃O₄ NPs to release Prussian blue (PB) prosoma while also destroying the secondary antibody label and immunological platform and lowering electrode impedance; (2) PB has a highly efficient catalytic effect on H₂O₂, allowing for the obvious amplification of electrical impulses; (3) PANI was electrodeposited on the electrode surface to avoid PB loss and signal leakage, which effectively absorbed and fixed PB while considerably increasing electron transmission efficiency. The sensor's detection limit was 0.254 pg·mL^-1 (S/N = 3), with a detection range of 1 pg·mL^-1 to 100 ng·mL^-1. The sensor has a high level of selectivity, repeatability, and stability, and it is predicted to be utilized to detect AFP in real-world samples.

Highly Sensitive Detection of Carcinoembryonic Antigen via an Electrochemical Platform Fabricated by AuNPs/Streptavidin/Reduced Graphene Oxide

Tumor markers are one of the important indicators for early cancer diagnosis. As a new analytical method, electrochemical immunosensing analysis has the advantages of high sensitivity, good selectivity, and rapid detection, which is of great significance for the detection of tumor markers. In this work, an AuNP/reduced graphene oxide (AuNP/rGO) composite was synthesized. We used it for electrochemical sensor fabrication with the assistance of the biotin–streptavidin protein (SA) system to further amplify the signal to achieve sensitive detection of carcinoembryonic antigen (CEA). In addition, AuNPs have been incorporated due to their good electrical conductivity and biocompatibility, which can accelerate electron transfer at the electrode interface and improve the loading capacity to capture antibodies. The fabricated AuNPs/SA/rGO has a large working surface area and high material utilization ratio, which improves the catalytic capacity of H₂O₂ reduction and effectively amplifies the current signal. The linear range of the response current signal of the sensor toward the CEA concentration is 20 fg/ml to 200 ng/ml, and the limit of detection can achieve 6.2 fg/ml. In addition, the fabricated immunosensor has good reproducibility, selectivity, and stability.

Electrochemical nanobiosensors equipped with peptides: a review

Recent research in the field of electrochemical biosensors equipped with peptides and nanomaterials have been categorized, reviewed, and critically analyzed. Indeed, using these innovative biosensors can revolutionize biomedical diagnostics in the future. Saving lives, time, and money in this field will be considered as some main benefits of this type of diagnosis. Here, these biosensors have been categorized and evaluated in four main sections. In the first section, the focus is on investigating the types of electrochemical peptide-based nanobiosensors applied to detect pathogenic microorganisms, microbial toxins, and viruses. In the second section, due to the importance of rapid diagnosis and prognosis of various cancers, the electrochemical peptide-based nanobiosensors designed to detect cancer biomarkers have been reviewed and analyzed. In the third section, the electrochemical peptide-based nanobiosensors, which were applied to detect the essential and effective biomolecules in the various diseases, and health control, including enzymes, hormones, biomarkers, and other biomolecules, have been considered. Finally, using a comprehensive analysis, all the used elements in these biosensors have been presented as conceptual diagrams that can effectively guide researchers in future developments. The essential factors in evaluating and analyzing these electrochemical peptide-based nanobiosensors such as analyte, peptide sequence, functional groups interacted between the peptide sequences and other biosensing components, the applied nanomaterials, diagnostic techniques, detection range, and limit of detection have also been included. Other analyzable items such as the type of used redox marker and the location of the peptide sequence against the signal transducer were also considered.

Facile strategy for the synthesis of silver nanoparticles on magnetic Fe3O4@C core-shell nanocomposites and their application in catalytic reduction

The integration of noble metal nanoparticles (NPs) on magnetic hollow structures is of particular importance for high catalytic activity, while the magnetic property is useful for the recovery of the composites. Herein, we prepared Ag NP decorated Fe₃O₄@C hollow magnetic microtubes by a facile and controllable approach. To this end, tannic acid-ferric ion (TA-Fe) first polymerized in situ on the MoO₃@FeOOH microrods and served as a reducing/stabilizing agent to integrate Ag NPs with high coverage. Moreover, no extra reductant was required owing to the reducibility of TA for the formation of FeOOH@TA-Fe/Ag microtubes. After thermal treatment under an N₂ atmosphere, hollow Fe₃O₄@C-Ag microtubes are obtained with a high surface area and excellent magnetism. Remarkable catalytic activity was achieved towards the reduction of 4-nitrophenol (4-NP) owing to the high coverage of Ag NPs on the tube-like structure, while the composite was easily collected with an external magnet. The integration of Ag NPs and the magnetic hollow structure provides a great platform for designing hybrid catalysts with high efficiency and recoverability.

Rational design, synthesis, and applications of carbon-assisted dispersive Ni-based composites

Herein, we review recent developments in the rational design and engineering of various carbon-assisted dispersive nickel-based composites, and boosted properties for protein adsorption and nitroaromatics reduction.

Electrochemistry/Photoelectrochemistry-Based Immunosensing and Aptasensing of Carcinoembryonic Antigen

Recently, electrochemistry- and photoelectrochemistry-based biosensors have been regarded as powerful tools for trace monitoring of carcinoembryonic antigen (CEA) due to the fact of their intrinsic advantages (e.g., high sensitivity, excellent selectivity, small background, and low cost), which play an important role in early cancer screening and diagnosis and benefit people's increasing demands for medical and health services. Thus, this mini-review will introduce the current trends in electrochemical and photoelectrochemical biosensors for CEA assay and classify them into two main categories according to the interactions between target and biorecognition elements: immunosensors and aptasensors. Some recent illustrative examples are summarized for interested readers, accompanied by simple descriptions of the related signaling strategies, advanced materials, and detection modes. Finally, the development prospects and challenges of future electrochemical and photoelectrochemical biosensors are considered.

Ultrasensitive Double-Channel Microfluidic Biosensor-Based Cathodic Photo-electrochemical Analysis via Signal Amplification of SOD-Au@PANI for Cardiac Troponin I Detection

Interesting double-channel microfluidic chip integration with a sandwich-type cathodic photo-electrochemical (PEC) biosensor is utilized for ultrasensitive and efficient detection of cardiac troponin I (cTnI) based on a signal amplification strategy. The Pd nanoparticles loading on the I-doped bismuth oxybromide with oxygen vacancies (Pd/I:BiOBr-OVs) as a sensing platform can effectively enhance cathodic photocurrent response by improving the visible light absorption ability with I doping, facilitating the efficiency separation of photogenerated electron-hole pairs with OVs, and increasing the electron-transfer rate with Pd loading, where the photogenerated electron could be captured by dissolved O₂ to boost generation of a superoxide anion radical (^•O₂^-). To further enhance the PEC response, a novel superoxide dismutase loaded on gold@polyaniline (SOD-Au@PANI) as a signal amplification label is developed for incubating the detection antibody (dAb). It is particularly noteworthy that SOD can effectively catalyze dismutation of the ^•O₂^- to produce H₂O₂ and O₂, and Au@PANI with a good reduction and catalytic property can catalyze the produced H₂O₂ into H₂O and O₂. Then, the produced O₂ that has been dissolved or adsorbed can capture more photogenerated electrons, resulting in more electron-hole pairs to separate, so as to the cathodic photocurrent signal of this system which can be amplified more significantly. Therefore, a signal amplification cathodic PEC biosensor is prepared for sensitively detecting cTnI, in which a good linearity ranging from 0.1 pg/mL to 100 ng/mL with a low detection limit of 0.042 pg/mL is obtained. Furthermore, the proposed biosensor exhibits excellent sensitivity and high selectivity, which could be extended to detect other disease markers in biological analysis and early disease diagnosis.

Enzyme-free sandwich-type electrochemical immunosensor for CEA detection based on the cooperation of an Ag/g-C3N4-modified electrode and Au@SiO2/Cu2O with core-shell structure

Effective signal amplification is a prerequisite for electrochemical immunosensors to achieve ultra-sensitive detection. In this work, we prepared a sandwich-type electrochemical immunosensor for the quantitative detection of carcinoembryonic antigen (CEA). As a base platform, Ag NPs modified aminated two-dimensional nitrogen carbide nanosheets (Ag/g-C₃N₄) have good biocompatibility and conductivity. In addition, with the layered structure of Au@SiO₂/Cu₂O as the signal label, the response current value of H₂O₂ was monitored by the Amperometric i-t Curve (i-t), so as to realize the accurate measurement of CEA. The presence of SiO₂ nanoframes not only reduces the agglomeration of Au NPs and Cu₂O but also provides good biocompatibility to facilitate the connection of secondary antibodies. Finally, we also verified the signal amplification mechanism of the immunosensor through XPS and other means, and calculated the kinetic parameters of the signal tag, which proved the good peroxidase-like activity of Au@SiO₂/Cu₂O. Under the best test conditions, the prepared immunosensor has a detection range from 0.01 pg/mL to 80 ng/mL, and the detection limit is as low as 0.0038 pg/mL. The results show that the immunosensor has good analytical performance and it can provide a new method for the clinical diagnosis of CEA.

Metal Nanoparticle and Quantum Dot Tags for Signal Amplification in Electrochemical Immunosensors for Biomarker Detection

With the increasing importance of healthcare and clinical diagnosis, as well as the growing demand for highly sensitive analytical instruments, immunosensors have received considerable attention. In this review, electrochemical immunosensor signal amplification strategies using metal nanoparticles (MNPs) and quantum dots (Qdots) as tags are overviewed, focusing on recent developments in the ultrasensitive detection of biomarkers. MNPs and Qdots can be used separately or in combination with other nanostructures, while performing the function of nanocarriers, electroactive labels, or catalysts. Thus, different functions of MNPs and Qdots as well as recent advances in electrochemical signal amplification are discussed. Additionally, the methods most often used for antibody immobilization on nanoparticles, immunoassay formats, and electrochemical methods for indirect biomarker detection are overviewed.

A frogspawn-like Ag@C core–shell structure for an ultrasensitive label-free electrochemical immunosensing of carcinoembryonic antigen in blood plasma

Novel frogspawn-like Ag@C nanoparticles were successfully used to fabricate an ultrasensitive electrochemical immunosensing platform toward CEA in human blood samples.