Development of a microarray lateral flow strip test using a luminescent organic compound for multiplex detection of five mycotoxins

Establishment of an amplification strategy - specific binding - convenient processing integrated aflatoxin B1 detection method based on Fe3O4-NH4/AuNPs/apt-S1

Aflatoxin B1 (AFB1) is a potent toxin in food, necessitating rapid, instant, and sensitive detection. We have engineered an electrochemical sensor to monitor AFB1 using a system composed of Fe3O4-NH4/AuNPs/apt-S1. The aptamer specifically recognizes AFB1, while 'S1' is functionalized with methylene blue to enhance the current. The RecJf exonuclease promotes the formation of the electrochemical strategy. The Fe3O4 component, with its magnet properties, enables a rapid separation of solids and liquids without the need for instrumentation. The sensor exhibits a linear range for AFB1 ranging from 1 ng to 10 μg. The regression equation is I(nA) = 446.8 × logc+2085 (where I and c represent the peak current and AFB1 concentration, respectively). The correlation coefficient is 0.9508, and the detection limit is 3.447 nM. The relative standard deviation of AFB1 in peanut oil ranges from 4.80% to 6.80%. These results demonstrate that the sensor has high sensitivity, stability, repeatability, and specificity for AFB1 detection.

Development of a fluorescent multiplexed lateral flow immunoassay for the simultaneous detection of crustacean allergen tropomyosin, sarcoplasmic calcium binding protein and egg allergen ovalbumin in different matrices and commercial foods

A quantum dot (QD) based multiplexed lateral flow immunoassay (xLFIA) for the simultaneous detection of egg allergen ovalbumin, crustacean allergen tropomyosin (TM) and sarcoplasmic calcium binding protein (SCP) was developed in this study. QD-labeled rabbit anti-ovalbumin, SCP and TM antibodies were applied as fluorescent detection probes. The chromatography system was optimized to reduce the mutual interference of different test lines. Visual and instrumental detection limits of the xLFIA were 0.1 and 0.05 μg/mL for SCP, both 0.05 μg/mL for ovalbumin and both 0.5 μg/mL for TM. As low as 0.10 % crab powder, 0.01 % egg white powder and 0.05 % shrimp powder could be detected in all three model foods using xLFIA. Besides, the xLFIA detection results of 23 of 28 commercial foods were consistent with ingredient labels. These findings indicate that the developed xLFIA is a practical tool for point-of-care detection of egg and crustacean allergens in processed and commercial foods.

Development of gold nanocluster complex for the detection of tumor necrosis factor-alpha based on immunoassay

Tumor necrosis factor-alpha, TNF-α, a cytokine recognized as a key regulator of inflammatory responses, is primarily produced by activated monocytes and macrophages. Measuring TNF-α levels serves as a valuable indicator for tracking several diseases and pathological states. Gold nanotechnology has been identified as a highly effective catalyst with unique properties for measuring inflammatory cytokines. This study aimed to synthesize gold nanoclusters (AuNCs) and the AuNCs-streptavidin system, along with their characterizations and spherical morphology. The detection of TNF-α antigen with AuNCs was determined, and a new immunoassay-based AuNCs analytical platform was studied. In this study, it was demonstrated that the synthesized AuNCs and AuNCs-streptavidin showed a bright-yellow appearance with absorption peaks at A600 and A610 nm, respectively. The approximately spherical shape was observed by TEM analysis. The AuNCs demonstrated a sensitivity limit for the detection of the TNF-α antigen, with a linear dose-dependent detection range of less than 1.25 ng/mL. The products of the band sizes and band intensities were proportional to the amount of TNF-α in the range of ∼80 kDa, ∼55 kDa, and ∼ 25 kDa in western blot analysis. The TNF-α in cell lysate was successfully detected using an immunoassay after the activation of RAW264.7 cells with lipopolysaccharide (LPS). This assay may serve as a viable alternative for TNF-α detection with high speed, sensitivity, and qualities, ensuring its broad applications.

Development of an immunoassay for the detection of mycotoxins using xMAP technology and its evaluation in black tea samples

Mycotoxins, a natural food contaminant, are secondary metabolites of fungi. Aflatoxin B1 (AFB1) and ochratoxin A (OTA) are two major mycotoxins found in various food commodities. These mycotoxins are hepatotoxic, nephrotoxic, cytotoxic, mutagenic and carcinogenic, thus they are a public health concern and their monitoring in food commodities is necessary. There are several conventional techniques available for mycotoxin detection, such as HPLC, LCMS, and ELISA. However, extensive nature and huge cost allowances make it challenging to deploy these techniques for monitoring of mycotoxins in the large sample size. Therefore, a robust, responsive and high-throughput technique is required. Here, we aimed to develop a multiplexed Luminex suspension assay based on multi analyte profiling (xMAP) technology for the simultaneous detection of AFB1 and OTA in the black tea, which is found to be contaminated with these mycotoxins during the cultivation or processing steps. Limit of detection for AFB1 and OTA, was 0.06 ng/ml and 0.49 ng/ml, respectively without any cross-reactivity with other mycotoxins and this assay is suitable for simultaneous detection of AFB1 and OTA in the same sample. Collectively, based on the results, we suggest that the developed Luminex suspension assay is sensitive, accurate, rapid and suitable for high-throughput screening of multiple mycotoxins.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05848-3.

Improvement of the sensitivity of lateral flow systems for detecting mycotoxins: Up-to-date strategies and future perspectives

Mycotoxins are dangerous human and animal health-threatening secondary fungal metabolites that can be found in various food and agricultural products. Several countries have established regulations to restrict their presence in food and agricultural products destined for human and animal consumption. Consequently, the need to develop highly sensitive and smart detection systems was recognized worldwide. Lateral flow assay possesses the advantages of easy operation, rapidity, stability, accuracy, and specificity, and it plays an important role in the detection of mycotoxins. Nevertheless, strategies to comprehensively improve the sensitivity of lateral flow assay to mycotoxins in food have rarely been highlighted and discussed. In this article, a comprehensive overview was presented on the application of lateral flow assay in mycotoxin detection in food samples by highlighting the principle of lateral flow assay, presenting a detailed discussion on various analytical performance-improvement strategies, such as the development of high-affinity recognition reagents, immunogen immobilization methods, and signal amplification. Additionally, a detailed discussion on the various signal analyzers and interpretation approaches was provided. Finally, current hurdles and future perspectives on the application of lateral flow assay in the detection of mycotoxins were discussed.

Lateral flow assay: a promising rapid point-of-care testing tool for infections and non-communicable diseases

The point-of-care testing (POCT) approach has established itself as having remarkable importance in diagnosing various infectious and non-communicable diseases (NCDs). The POCT approach has succeeded in meeting the current demand for having diagnostic strategies that can provide fast, sensitive, and highly accurate test results without involving complicated procedures. This has been accomplished by introducing rapid bioanalytical tools or biosensors such as lateral flow assays (LFAs). The production cost of these tools is very low, allowing developing countries with limited resources to utilize them or produce them on their own. Thus, their use has grown in various fields in recent years. More importantly, LFAs have created the possibility for a new era of incorporating nanotechnology in disease diagnosis and have already attained significant commercial success worldwide, making POCT an essential approach not just for now but also for the future. In this review, we have provided an overview of POCT and its evolution into the most promising rapid diagnostic approach. We also elaborate on LFAs with a special focus on nucleic acid LFAs.

High Bioaffinity Controllable Assembly Nanocarrier UiO-66-NH2@Quantum Dot-Based Immunochromatographic Assay for Simultaneous Detection of Five Mycotoxins in Cereals and Feed

Herein, the UiO-66-NH2@quantum dot (NU66@QD) was synthesized with excellent fluorescence intensity and biocompatibility, which was used to develop a multiple immunochromatographic assay (ICA) for the detection of aflatoxin B1 (AFB1), fumonisin B1 (FB1), deoxynivalenol (DON), T-2 toxins (T-2), and zearalenone (ZEN) in cereals and feed. Five monoclonal antibodies and NU66@QD were efficiently labeled by a one-step mixed method to form a multiple detection probe. The limits of detection of the proposed NU66@QD-ICA for AFB1/FB1/DON/T-2/ZEN were 0.04/0.28/0.25/0.09/0.08 μg/kg. The recoveries ranged from 82.83-117.44%, with the coefficient of variation from 2.88-11.80%. A parallel analysis in 35 naturally contaminated cereal and feed samples was confirmed by LC-MS/MS, and the results showed a good correlation (R2 > 0.9), indicating the practical reliability of the multiple NU66@QD-ICA. Overall, the introduction of the novel nanomaterial NU66@QD provides a highly sensitive and efficient multiplex detection strategy for the development of ICA.

Multi-target photothermal immunochromatography for simultaneous detection of three mycotoxins in foods

BACKGROUND

Mycotoxin contaminated food poses a threat to human health. On-site detection of mycotoxin contamination is of significance to reduce the agricultural and food industries loss. Lateral flow immunochromatography (LFIC) as on-site detection method for mycotoxins has the advantages of low cost, easy to operate and short time-consuming. Of the various types of LFIC, photothermal LFIC possesses better sensitivity and stronger quantitative capability, but is unable to conduct synchronous multi-target analysis because that the laser can only activate one test area at a time. It was clear that a synchronous multi-target photothermal LFIC method was needed.

RESULTS

In this study, a photothermal LFIC method for the simultaneous detection of three mycotoxins, deoxynivalenol (DON), aflatoxin B1 (AFB1) and zearalenone (ZEN), was developed. We broadened the laser source with a beam expander and realized the irradiation and activation of three test zones simultaneously. In addition, the competitive photothermal LFIC was constructed by using Cu2-xSe-Au nanocomposites with excellent photothermal properties (η = 87.47%) as photothermal signal probes and thermal imager as photothermal signal collector. Under optimized experimental conditions, the limits of detection (LOD) were 73 ng L-1, 45 ng L-1 and 43 ng L-1 for DON, AFB1 and ZEN, respectively. The method had good linearity in three orders of magnitude and good specificity. The recoveries of the three mycotoxins in oat, cornmeal and millet samples ranged from 78.6% to 112.4%.

SIGNIFICANCE

Compared with previous studies, this method improved the sensitivity, broadened the linear range of detection without large equipment and realized synchronous multi-target analysis for DON, AFB1 and ZEN. We addressed a key limitation of photothermal LFIC by a simple way, facilitating the application of this technique in multi-target on-site detection in wider fields.

Progression of Paper-Based Point-of-Care Testing toward Being an Indispensable Diagnostic Tool in Future Healthcare

Point-of-care (POC) diagnostics in particular focuses on the timely identification of harmful conditions close to the patients' needs. For future healthcare these diagnostics could be an invaluable tool especially in a digitalized or telemedicine-based system. However, while paper-based POC tests, with the most prominent example being the lateral flow assay (LFA), have been especially successful due to their simplicity and timely response, the COVID-19 pandemic highlighted their limitations, such as low sensitivity and ambiguous responses. This perspective discusses strategies that are currently being pursued to evolve such paper-based POC tests toward a superior diagnostic tool that provides high sensitivities, objective result interpretation, and multiplexing options. Here, we pinpoint the challenges with respect to (i) measurability and (ii) public applicability, exemplified with select cases. Furthermore, we highlight promising endeavors focused on (iii) increasing the sensitivity, (iv) multiplexing capability, and (v) objective evaluation to also ready the technology for integration with machine learning into digital diagnostics and telemedicine. The status quo in academic research and industry is outlined, and the likely highly relevant role of paper-based POC tests in future healthcare is suggested.

A loop-mediated isothermal amplification-enabled analytical assay for the detection of SARS-CoV-2: A review

The number of words: 4645, the number of figures: 4, the number of tables: 1The outbreak of COVID-19 in December 2019 caused a global pandemic of acute respiratory disease, and with the increasing virulence of mutant strains and the number of confirmed cases, this has resulted in a tremendous threat to global public health. Therefore, an accurate diagnosis of COVID-19 is urgently needed for rapid control of SARS-CoV-2 transmission. As a new molecular biology technology, loop-mediated isothermal amplification (LAMP) has the advantages of convenient operation, speed, low cost and high sensitivity and specificity. In the past two years, rampant COVID-19 and the continuous variation in the virus strains have demanded higher requirements for the rapid detection of pathogens. Compared with conventional RT-PCR and real-time RT-PCR methods, genotyping RT-LAMP method and LAMP plus peptide nucleic acid (PNA) probe detection methods have been developed to correctly identified SARS-CoV-2 variants, which is also why LAMP technology has attracted much attention. LAMP detection technology combined with lateral flow assay, microfluidic technology and other sensing technologies can effectively enhance signals by nucleic acid amplification and help to give the resulting output in a faster, more convenient and user-friendly way. At present, LAMP plays an important role in the detection of SARS-CoV-2.

Chromatographic methods for rapid aflatoxin B1 analysis in food: a review

Aflatoxin B1 (AFB1) is a mycotoxin and is the most carcinogenic of all known chemicals. In view of the AFB1 characteristics of widespread distribution, serious pollution, great harm to humans, and animals and difficult to remove, it is urgent to develop a convenient and sensitive detection method. Moreover, chromatographic test strips (CTSs) are a rapid detection technology that combines labeling technology with chromatography technology. CTSs have been widely used in the fields of environmental monitoring, medical diagnosis, and food safety analysis in recent years. Different from other immune assays, they have the advantages of short measuring time, low cost, high efficiency and no need for professionals to operate. In addition, the introduction of nanomaterials has laid a good foundation for the detection of high sensitivity, high specificity and high efficiency via CTSs. Herein, we tend to comprehensively introduce the applications of chromatographic methods in AFB1 detection and pay attention to the signal detection modes based on nanomaterials in antibody-based immunochromatographic strips (ICSs), such as colorimetric, fluorescent, chemiluminescent, and Raman scattering sensing. Some typical examples are also listed in this review. In the end, we make a summary and put forward prospects for the development of CTSs.

Recent advances in simultaneous detection strategies for multi-mycotoxins in foods

Mycotoxin contamination has become a challenge in the field of food safety testing, given the increasing emphasis on food safety in recent years. Mycotoxins are widely distributed, in heavily polluted areas. Food contamination with these toxins is difficult to prevent and control. Mycotoxins, as are small-molecule toxic metabolites produced by several species belonging to the genera Aspergillus, Fusarium, and Penicillium growing in food. They are considered teratogenic, carcinogenic, and mutagenic to humans and animals. Food systems are often simultaneously contaminated with multiple mycotoxins. Due to the additive or synergistic toxicological effects caused by the co-existence of multiple mycotoxins, their individual detection requires reliable, accurate, and high-throughput techniques. Currently available, methods for the detection of multiple mycotoxins are mainly based on chromatography, spectroscopy (colorimetry, fluorescence, and surface-enhanced Raman scattering), and electrochemistry. This review provides a comprehensive overview of advances in the multiple detection methods of mycotoxins during the recent 5 years. The principles and features of these techniques are described. The practical applications and challenges associated with assays for multiple detection methods of mycotoxins are summarized. The potential for future development and application is discussed in an effort, to provide standards of references for further research.

Analytical Validation of a Direct Competitive ELISA for Multiple Mycotoxin Detection in Human Serum

Mycotoxin exposure in humans is primarily assessed through its occurrence in external sources, such as food commodities. Herein, we have developed a direct competitive ELISA to facilitate the detection of aflatoxin B1 (AFB1), deoxynivalenol (DON), fumonisin (FUM B1/B2), ochratoxin A (OTA), and zearalenone (ZEA) in human serum. The analytical validation of the assay followed practices endorsed by the international research community and the EU directive 96/23/EC in order to examine detection capability, recovery, and cross-reactivity. The assay demonstrated a lower limit of quantitation (LLOQ) for AFB1 [0.61 ng/mL (hereon ng/mL = ppb)], DON (19.53 ppb), FUM (4.88 ppb), OTA (19.53 ppb), and ZEA (0.15 ppb). Recovery from human serum for all mycotoxins spanned from 73% to 106%. Likewise, the specificity for monoclonal antibodies against cross-reactant mycotoxins ranged from 2% to 11%. This study compares the LLOQ and recovery values with commercial and emerging immuno-based methods for detecting mycotoxins in foodstuffs. The LLOQ values from the present study were among the lowest in commercial or emerging methods. Despite the differences in the extraction protocols and matrices, the recovery range in this study, commercial tests, and other procedures were similar for all mycotoxins. Overall, the assay detected AFB1, DON, FUM, OTA, and ZEA in human serum with excellent accuracy, precision, and specificity.

Rapid and sensitive detection of zearalenone in corn using SERS-based lateral flow immunosensor

Zearalenone (ZEN) is a universal mycotoxin contaminant in corn and its products. A surface-enhanced Raman scattering (SERS) based test strip was proposed for the detection of ZEN, which had the advantages of simplicity, rapidity, and high sensitivity. Core-shell Au@AgNPs with embedded reporter molecules (4-MBA) were synthesized as SERS nanoprobe, which exhibited excellent SERS signals and high stability. The detection range of ZEN for corn samples was 10-1000 μg/kg with the limit of detection (LOD) of 3.6 μg/kg, which is far below the recommended tolerable level (60 μg/kg). More importantly, the SERS method was verified by HPLC in the application on corn samples contaminated with ZEN, and the coincidence rates were in the range of 86.06%-111.23%, suggesting a high accuracy of the SERS assay. Therefore, the SERS-based test strip with an analysis time of less than 15 min is a promising tool for accurate and rapid detection of ZEN-field contamination.

The evolution of multiplex detection of mycotoxins using immunoassay platform technologies

Mycotoxins present serious threats not only for public health, but also for the economy and environment. The problems become more complex and serious due to co-contamination of multiple hazardous mycotoxins in commodities and environment. To mitigate against this issue, accurate, affordable, and rapid multiplex detection methods are required. This review presents an overview of emerging rapid immuno-based multiplex methods capable of detecting mycotoxins present in agricultural products and feed ingredients published within the past five years. The scientific principles, advantages, disadvantages, and assay performance of these rapid multiplex immunoassays, including lateral flow, fluorescence polarization, chemiluminescence, surface plasmon resonance, surface enhanced Raman scattering, electrochemical sensor, and nanoarray are discussed. From the recent literature landscape, it is predicted that the future trend of the detection methods for multiple mycotoxins will rely on the advance of various sensor technologies, a variety of enhancing and reporting signals based on nanomaterials, rapid and effective sample preparation, and capacity for quantitative analysis.

Developments in mycotoxin analysis: an update for 2020-2021

This review summarises developments published in the period from mid-2020 to mid-2021 on the analysis of a number of diverse matrices for mycotoxins. Notable developments in all aspects of mycotoxin analysis, from sampling and quality assurance/quality control of analytical results, to the various detection and quantitation technologies ranging from single mycotoxin biosensors to comprehensive instrumental methods are presented and discussed. The summary and discussion of this past year’s developments in detection and quantitation technology covers chromatography with targeted or non-targeted high resolution mass spectrometry, tandem mass spectrometry, detection other than mass spectrometry, biosensors, as well as assays using alternatives to antibodies. This critical review aims to briefly present the most important recent developments and trends in mycotoxin determination, as well as to address limitations of the presented methodologies.

Multiplex optical bioassays for food safety analysis: Toward on-site detection

Food safety analysis plays a significant role in controlling food contamination and supervision. In recent years, multiplex optical bioassays (MOBAs) have been widely applied to analyze multiple hazards due to their efficiency and low cost. However, due to the challenges such as multiplexing capacity, poor sensitivity, and bulky instrumentation, the further application of traditional MOBAs in food screening has been limited. In this review, effective strategies regarding food safety MOBAs are summarized, such as spatial-resolution modes performed in multi-T lines/dots strips or arrays of strip/microplate/microfluidic chip/SPR chip and signal-resolution modes employing distinguishable colorimetric/luminescence/fluorescence/surface plasma resonance/surface-enhanced Raman spectrum as signal tags. Following this, new trends on how to design engineered sensor architecture and exploit distinguishable signal reporters, how to improve both multiplexing capacity and sensitivity, and how to integrate these formats into smartphones so as to be mobile are summarized systematically. Typically, in the case of enhancing multiplexing capacity and detection throughput, microfluidic array chips with multichannel architecture would be a favorable approach to overcome the spatial and physical limitations of immunochromatographic assay (ICA) test strips. Moreover, noble metal nanoparticles and single-excitation, multiple-emission luminescence nanomaterials hold great potential in developing ultrasensitive MOBAs. Finally, the exploitation of innovative multiplexing strategy hybridized with powerful and widely available smartphones opens new perspectives to MOBAs. In future, the MOBAs should be more sensitive, have higher multiplexing capacity, and easier instrumentation.

Recent Progress in Rapid Determination of Mycotoxins Based on Emerging Biorecognition Molecules: A Review

Mycotoxins are secondary metabolites produced by fungal species, which pose significant risk to humans and livestock. The mycotoxins which are produced from Aspergillus, Penicillium, and Fusarium are considered most important and therefore regulated in food- and feedstuffs. Analyses are predominantly performed by official laboratory methods in centralized labs by expert technicians. There is an urgent demand for new low-cost, easy-to-use, and portable analytical devices for rapid on-site determination. Most significant advances were realized in the field bioanalytical techniques based on molecular recognition. This review aims to discuss recent progress in the generation of native biomolecules and new bioinspired materials towards mycotoxins for the development of reliable bioreceptor-based analytical methods. After brief presentation of basic knowledge regarding characteristics of most important mycotoxins, the generation, benefits, and limitations of present and emerging biorecognition molecules, such as polyclonal (pAb), monoclonal (mAb), recombinant antibodies (rAb), aptamers, short peptides, and molecularly imprinted polymers (MIPs), are discussed. Hereinafter, the use of binders in different areas of application, including sample preparation, microplate- and tube-based assays, lateral flow devices, and biosensors, is highlighted. Special focus, on a global scale, is placed on commercial availability of single receptor molecules, test-kits, and biosensor platforms using multiplexed bead-based suspension assays and planar biochip arrays. Future outlook is given with special emphasis on new challenges, such as increasing use of rAb based on synthetic and naïve antibody libraries to renounce animal immunization, multiple-analyte test-kits and high-throughput multiplexing, and determination of masked mycotoxins, including stereoisomeric degradation products.

A nanomaterial-free and thionine labeling-based lateral flow immunoassay for rapid and visual detection of the transgenic CP4-EPSPS protein

Nanomaterial-based lateral flow immunoassays (LFIAs) have been widely used for the on-site detection of genetically modified components. However, the practical applications are often limited by the complex matrix, such as in red samples. In this study, a thionine (Thi) labeling-based LFIA was developed for the first time to detect CP4-EPSPS protein. The optimal labeling concentration of Thi was 0.5 mg/mL, and the antibody could be rapidly coupled to Thi in 10 min. The visual limit of detection (vLOD) levels for transgenic soybean, sugar beet, and cotton containing the CP4-EPSPS protein reached 0.05%, 0.1%, and 0.1%, respectively, and had no interference from other proteins. After storage at 4 °C for three months, the LFIA sensitivity remained unchanged and showed good stability. This method could be used to screen and detect a variety of transgenic crops containing the CP4-EPSPS protein, and the results were consistent with the current standard assay. This study pioneered the development of an immunochromatographic method using Thi as a marker and applied it to the detection of the CP4-EPSPS protein in herbicide-tolerant transgenic crops. This provides a new method for the rapid immunoassay of Thi as a dye and has good prospects for practical application.

Ten Years of Lateral Flow Immunoassay Technique Applications: Trends, Challenges and Future Perspectives

The Lateral Flow Immunoassay (LFIA) is by far one of the most successful analytical platforms to perform the on-site detection of target substances. LFIA can be considered as a sort of lab-in-a-hand and, together with other point-of-need tests, has represented a paradigm shift from sample-to-lab to lab-to-sample aiming to improve decision making and turnaround time. The features of LFIAs made them a very attractive tool in clinical diagnostic where they can improve patient care by enabling more prompt diagnosis and treatment decisions. The rapidity, simplicity, relative cost-effectiveness, and the possibility to be used by nonskilled personnel contributed to the wide acceptance of LFIAs. As a consequence, from the detection of molecules, organisms, and (bio)markers for clinical purposes, the LFIA application has been rapidly extended to other fields, including food and feed safety, veterinary medicine, environmental control, and many others. This review aims to provide readers with a 10-years overview of applications, outlining the trends for the main application fields and the relative compounded annual growth rates. Moreover, future perspectives and challenges are discussed.