1
|
Singh S, Aburashed R, Natale G. CFD based analysis of 3D printed nasopharyngeal swabs for COVID-19 diagnostics. COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE 2022; 223:106977. [PMID: 35780521 PMCID: PMC9233993 DOI: 10.1016/j.cmpb.2022.106977] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/06/2022] [Revised: 06/12/2022] [Accepted: 06/25/2022] [Indexed: 05/29/2023]
Abstract
BACKGROUND AND OBJECTIVE Additive manufacturing of nasopharyngeal (NP) swabs using 3D printing technology presents a viable alternative to address the immediate shortage problem of standard flock-headed swabs for rapid COVID-19 testing. Recently, several geometrical designs have been proposed for 3D printed NP swabs and their clinical trials are already underway. During clinical testing of the NP swabs, one of the key criteria to compare the efficacy of 3D printed swabs with traditional swabs is the collection efficiency. In this study, we report a numerical framework to investigate the collection efficiency of swabs utilizing the computational fluid dynamics (CFD) approach. METHODS Three-dimensional computational domain comprising of NP swab dipped in the liquid has been considered in this study to mimic the dip test procedure. The volume of fluid (VOF) method has been employed to track the liquid-air interface as the NP swab is pulled out of the liquid. The governing equations of the multiphase model have been solved utilizing finite-volume-based ANSYS Fluent software by imposing appropriate boundary conditions. Taguchi's based design of experiment analysis has also been conducted to evaluate the influence of geometric design parameters on the collection efficiency of NP swabs. The developed model has been validated by comparing the numerically predicted collection efficiency of different 3D printed NP swabs with the experimental findings. RESULTS Numerical predictions of the CFD model are in good agreement with the experimental results. It has been found that there prevails huge variability in the collection efficiency of the 3D printed designs of NP swabs available in the literature, ranging from 2 µl to 120 µl. Furthermore, even the smallest alteration in the geometric design parameter of the 3D printed NP swab results in significant changes in the amount of fluid captured. CONCLUSIONS The proposed framework would assist in quantifying the collection efficiency of the 3D printed designs of NP swabs, rapidly and at a low cost. Moreover, we demonstrate that the developed framework can be extended to optimize the designs of 3D printed swabs to drastically improve the performances of the existing designs and achieve comparable efficacy to that of conventionally manufactured swabs.
Collapse
Affiliation(s)
- Sundeep Singh
- Complex Fluids Lab, Chemical and Petroleum Engineering, University of Calgary, Calgary, Alberta, T2N 1N4, Canada
| | - Raied Aburashed
- BioMEMS and Bioinspired Microfluidic Laboratory, Department of Mechanical and Manufacturing Engineering, University of Calgary, Calgary, Alberta T2N 1N4, Canada
| | - Giovanniantonio Natale
- Complex Fluids Lab, Chemical and Petroleum Engineering, University of Calgary, Calgary, Alberta, T2N 1N4, Canada.
| |
Collapse
|
2
|
Prashar G, Vasudev H, Bhuddhi D. Additive manufacturing: expanding 3D printing horizon in industry 4.0. INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING (IJIDEM) 2022. [PMCID: PMC9256535 DOI: 10.1007/s12008-022-00956-4] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/21/2022] [Accepted: 04/30/2022] [Indexed: 06/29/2023]
Abstract
Additive Manufacturing (AM) technology enables the production of personalized goods at reduced development costs, shorter lead times, lower energy consumption during manufacturing, and decreased material waste. AM will be consolidated as a leading technology in numerous sectors in the near future due to the maturity of the technology, the wide range of possibilities afforded by 3D printing, and the institutional push. One of the most important aspects of Industry 4.0 is 3D printing. It may be used to fabricate complicated parts and allows companies to cut inventory, develop on-demand items, create smaller localized manufacturing conditions, and even shorten supply chains. AM is expected to increase rapidly in the future because of its above stated remarkable “performance record.“ According to a report published the AM market is predicted to produce US$2 trillion worth of components and end products by year 2030. Hence integration of smart technology and production systems or indirectly one can say that AM is promoting Industry 4.0 and it plays a pivotal role in solving some of the 4th industrial revolution’s most important needs. AM is a future paradigm for futuristic production systems, and Industry 4.0 will leverage its potential to reach essential goals. AM will be found now days in a variety of industrial applications including aerospace and health care to consumer goods. This review article discusses about brief AM technology, history, its industrial applications, challenges, and future prospective. Finally, case studies using AM has been considered.
Collapse
Affiliation(s)
- Gaurav Prashar
- School of Mechanical Engineering, Lovely Professional University, 144411 Phagwara, India
| | - Hitesh Vasudev
- School of Mechanical Engineering, Lovely Professional University, 144411 Phagwara, India
| | - Dharam Bhuddhi
- Division of Research and Innovation, Uttaranchal University, 248007 Dehradun, Uttarakhand India
| |
Collapse
|
3
|
Kruger S, Steyn A. Innovation Environment’s Role in Supporting Industry 4.0 Technology Adoption to Address Effects of COVID-19. INTERNATIONAL JOURNAL OF INNOVATION AND TECHNOLOGY MANAGEMENT 2022. [DOI: 10.1142/s0219877022420019] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
Abstract
Health systems were severely strained at the start of the COVID-19 pandemic, where the demand for personal protection equipment (PPE) could not be met. The challenge faced by many countries was how to innovate quickly to create PPE and other needed solutions. The subsequent research gap identified was a lack of practical insights on how to support such novel technology adoption, particularly those that stem from Industry 4.0 (I4.0) within a developing world context. To address this previous literature on I4.0 technology, the role of innovation environments and theoretical principles of technology adoption was reviewed. A practical case from an academic makerspace based in a South African university was then assessed. It was selected due to its direct role in rapid solutions development of PPE using additive manufacturing (AM) until such a time that manufacturers could set up production on a larger scale. It was found that AM and other novel technologies have facilitated innovative solutions to address the significant impacts of the pandemic. Key to which were practices identified of an innovation environment that supported early-stage adoption of AM to achieve this even in a developing country context. The findings imply that innovation environments offer an agile platform to leverage innovation by streamlining certain critical success factors of I4.0 technology adoption, which is presented in a model. However, individual skills developed by such environments to enhance innovation capabilities within this paradigm require further research.
Collapse
Affiliation(s)
- Sean Kruger
- Department of Informatics, University of Pretoria, Pretoria, 0083, South Africa
| | - Adriana Steyn
- Department of Informatics, University of Pretoria, Pretoria, 0083, South Africa
| |
Collapse
|
4
|
Analysis of the COVID-19 pandemic’s impacts on manufacturing: a systematic literature review and future research agenda. OPERATIONS MANAGEMENT RESEARCH 2022. [PMCID: PMC9042664 DOI: 10.1007/s12063-021-00225-9] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
The COVID-19 pandemic has affected manufacturing companies and necessitated adaptations of firms’ operations. Despite the increasing interest in this subject, a scarcity of systematic analysis can be observed. The present study systematically reviews the existing research on the COVID-19 pandemic concerning the manufacturing industry. This paper aims to highlight the main impacts of the COVID-19 pandemic on the manufacturing sector from the operations management perspective, the practical adaptation actions, and future research opportunities. Open research questions and directions for further investigation are articulated and triangulated across organisational, process and technology perspectives.
Collapse
|
5
|
Agarwal R. The personal protective equipment fabricated via 3D printing technology during COVID-19. ANNALS OF 3D PRINTED MEDICINE 2022; 5:100042. [PMID: 38620978 PMCID: PMC8667480 DOI: 10.1016/j.stlm.2021.100042] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/22/2021] [Accepted: 12/12/2021] [Indexed: 12/24/2022] Open
Abstract
COVID-19 has been spread in more than 220 countries and caused global health concerns. The supply chain disruptions have abruptly affected due to the second wave of COVID-19 in various countries and caused unavailability and shortage of medical devices and personal protective equipment for frontline healthcare workers. Three-dimensional (3D) printing has proven to be a boon and revolutionized technology to supply medical devices and tackle the situation caused by the COVID-19 pandemic. The diverse designs were produced and are currently used in hospitals by patients and frontline healthcare doctors. This review summarises the application of 3D printing during COVID-19. It collects the comprehensive information of recently designed and fabricated protective equipment like nasopharyngeal swabs, valves, face shields, facemasks and many more medical devices. The drawbacks and future challenges of 3D printed medical devices and protective equipment is discussed.
Collapse
Affiliation(s)
- Raj Agarwal
- Mechanical Engineering Department, Thapar Institute of Engineering and Technology Patiala, Punjab 147004, India
| |
Collapse
|
6
|
Geurts A, Geerdink T, Sprenkeling M. Accelerated innovation in crises: The role of collaboration in the development of alternative ventilators during the COVID-19 pandemic. TECHNOLOGY IN SOCIETY 2022; 68:101923. [PMID: 36540134 PMCID: PMC9755541 DOI: 10.1016/j.techsoc.2022.101923] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/20/2020] [Revised: 01/26/2022] [Accepted: 02/02/2022] [Indexed: 05/29/2023]
Abstract
This article discusses the need for accelerated innovation in crisis situations and argues that collaboration plays an important role in enabling such acceleration. The central research question is: How can innovation efforts during crises be accelerated, and what role does collaboration play? We draw on a phenomenon-driven, in-depth qualitative case study of seven initiatives that have developed alternative ventilators in the Netherlands during the COVID-19 crisis. Our results highlight how the COVID-19 pandemic has created a relatively short crisis window of opportunity for accelerated innovation processes that is driven by the urgency to develop solutions to the challenge at hand. Importantly, we show that when collaborative initiatives join other collaborative initiatives- what we define as nested collaboration-a forum for coordinated knowledge and resource exchange between the initiatives is created, increasing the potential for learning and accelerating the innovation process. Finally, we find that purpose is an important intermediating mechanism to accelerate innovation as it enables non-competitive collaboration between the initiatives in favor of the public good. Our results have important implications for accelerated innovation processes to achieve societal missions, goals, or challenges.
Collapse
Affiliation(s)
- Amber Geurts
- TNO, Strategic Analysis & Policy. Location the Hague-New Babylon, P.O. Box 96800, 2509 JE, The Hague, the Netherlands
- Rathenau Institute, Anna van Saksenlaan 51, 2593 HW, The Hague, the Netherlands
| | - Tara Geerdink
- TNO, Strategic Analysis & Policy. Location the Hague-New Babylon, P.O. Box 96800, 2509 JE, The Hague, the Netherlands
| | - Marit Sprenkeling
- TNO, Strategic Analysis & Policy. Location the Hague-New Babylon, P.O. Box 96800, 2509 JE, The Hague, the Netherlands
| |
Collapse
|
7
|
Zhang X, Xu Y. Business Cycle and Public Health: The Moderating Role of Health Education and Digital Economy. Front Public Health 2022; 9:793404. [PMID: 35087786 PMCID: PMC8787688 DOI: 10.3389/fpubh.2021.793404] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2021] [Accepted: 10/25/2021] [Indexed: 01/22/2023] Open
Abstract
The cyclicality of public health in the emerging market is underexplored in existing literature. In this study, we used a fixed effect model and provincial data to document how public health varies with the business cycle in China over the period of 2010-2019. The estimated results showed that the business cycle is negatively correlated with the mortality of infectious disease, a proxy variable of public health, thus indicating that public health exhibits a countercyclical pattern in China. Furthermore, we investigated the potential moderating role of public health education and digital economy development in the relationship between business cycle and public health. Our findings suggested that public health education and digital economy development can mitigate the damage of economic conditions on public health in China. Health education helps the public obtain more professional knowledge about diseases and then induces effective preventions. Compared with traditional economic growth, digital economy development can avoid environmental pollution which affects public health. Also, it ensures that state-of-the-art medical services are available for the public through e-health. In addition, digitalization assures that remote working is practicable and reduces close contact during epidemics such as COVID-19. The conclusions stand when subjected to several endogeneity and robustness checks. Therefore, the paper implies that these improvements in public health education and digitalization can help the government in promoting public health.
Collapse
Affiliation(s)
- Xing Zhang
- School of Finance, Renmin University of China, Beijing, China
| | - Yingying Xu
- School of Economics and Management, University of Science and Technology Beijing, Beijing, China
| |
Collapse
|
8
|
Eassa HA, Helal NA, Amer AM, Fouad A, Bedair AF, Nagib R, Mansoor I, Hawash M, Abdul-Latif M, Mohammed KHA, Helal MA, Nounou MI. 3D-Printed Microfluidics Potential in Combating Future and Current Pandemics (COVID-19). RECENT ADVANCES IN DRUG DELIVERY AND FORMULATION 2022; 16:192-216. [PMID: 35894464 DOI: 10.2174/2667387816666220727101214] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/14/2022] [Revised: 05/04/2022] [Accepted: 05/10/2022] [Indexed: 06/15/2023]
Abstract
Coronavirus disease (COVID-19) emerged in China in December 2019. In March 2020, the WHO declared it a pandemic leading to worldwide lockdowns and travel restrictions. By May, it infected 4,789,205 and killed 318,789 people. This led to severe shortages in the medical sector besides devastating socio-economic effects. Many technologies such as artificial intelligence (AI), virtual reality (VR), microfluidics, 3D printing, and 3D scanning can step into contain the virus and hinder its extensive spread. This article aims to explore the potentials of 3D printing and microfluidic in accelerating the diagnosis and monitoring of the disease and fulfilling the shortages of personal protective equipment (PPE) and medical equipment. It highlights the main applications of 3D printers and microfluidics in providing PPE (masks, respirators, face shields, goggles, and isolation chambers/hoods), supportive care (respiratory equipment) and diagnostic supplies (sampling swabs & lab-on-chip) to ease the COVID-19 pressures. Also, the cost of such technology and regulation considerations are addressed. We conclude that 3D printing provided reusable and low-cost solutions to mitigate the shortages. However, safety, sterility, and compatibility with environmental protection standards need to be guaranteed through standardization and assessment by regulatory bodies. Finally, lessons learned from this pandemic can also help the world prepare for upcoming outbreaks.
Collapse
Affiliation(s)
- Heba A Eassa
- Department of Pharmaceutical Sciences, School of Pharmacy & Physician Assistant Studies, University of Saint Joseph, Hartford, CT 06103, USA
| | - Nada A Helal
- Pharmaceutical Sciences, Irma Lerma Rangel College of Pharmacy, Texas A&M University, TX, 78363, USA
| | - Ahmed M Amer
- Department of Clinical and Molecular Medicine, Faculty of Medicine and Health Sciences, Norwegian University of Science and Technology (NTNU), Trondheim, Norway
| | - Aliaa Fouad
- Division of Pathological Sciences, Department of Pharmacology and Experimental Therapeutics, Kyoto Pharmaceutical University, Kyoto, Japan
| | - Asser F Bedair
- Department of Pharmacology and Toxicology, Faculty of Pharmacy, Alexandria University, Alexandria, Egypt
| | | | | | - Motaz Hawash
- Dept of Food Science and Agri-Food Supply Chains, Harper Adams University, Newport, UK
| | | | - Kamilia H A Mohammed
- Department of Pharmaceutics and Pharmaceutical Technology, Faculty of Pharmacy (Girls), Al- Azhar University, Cairo, Egypt
| | - Mohamed A Helal
- Construction Planning Department, National Marine Dredging Company (NMDC), Abu Dhabi 11372, United Arab Emirates
| | - Mohamed Ismail Nounou
- Department of Pharmaceutical Sciences, School of Pharmacy & Physician Assistant Studies, University of Saint Joseph, Hartford, CT 06103, USA
| |
Collapse
|
9
|
Popescu D, Baciu F, Amza CG, Cotrut CM, Marinescu R. The Effect of Disinfectants Absorption and Medical Decontamination on the Mechanical Performance of 3D-Printed ABS Parts. Polymers (Basel) 2021; 13:4249. [PMID: 34883752 PMCID: PMC8659898 DOI: 10.3390/polym13234249] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/01/2021] [Revised: 11/23/2021] [Accepted: 12/02/2021] [Indexed: 12/13/2022] Open
Abstract
Producing parts by 3D printing based on the material extrusion process determines the formation of air gaps within layers even at full infill density, while external pores can appear between adjacent layers making prints permeable. For the 3D-printed medical devices, this open porosity leads to the infiltration of disinfectant solutions and body fluids, which might pose safety issues. In this context, this research purpose is threefold. It investigates which 3D printing parameter settings are able to block or reduce permeation, and it experimentally analyzes if the disinfectants and the medical decontamination procedure degrade the mechanical properties of 3D-printed parts. Then, it studies acetone surface treatment as a solution to avoid disinfectants infiltration. The absorption tests results indicate the necessity of applying post-processing operations for the reusable 3D-printed medical devices as no manufacturing settings can ensure enough protection against fluid intake. However, some parameter settings were proven to enhance the sealing, in this sense the layer thickness being the most important factor. The experimental outcomes also show a decrease in the mechanical performance of 3D-printed ABS (acrylonitrile butadiene styrene) instruments treated by acetone cold vapors and then medical decontaminated (disinfected, cleaned, and sterilized by hydrogen peroxide gas plasma sterilization) in comparison to the control prints. These results should be acknowledged when designing and 3D printing medical instruments.
Collapse
Affiliation(s)
- Diana Popescu
- Faculty of Industrial Engineering and Robotics, University Politehnica of Bucharest, 060042 Bucharest, Romania; (D.P.); (C.G.A.)
| | - Florin Baciu
- Faculty of Industrial Engineering and Robotics, University Politehnica of Bucharest, 060042 Bucharest, Romania; (D.P.); (C.G.A.)
| | - Catalin Gheorghe Amza
- Faculty of Industrial Engineering and Robotics, University Politehnica of Bucharest, 060042 Bucharest, Romania; (D.P.); (C.G.A.)
| | - Cosmin Mihai Cotrut
- Faculty of Materials Science and Engineering, University Politehnica of Bucharest, 060042 Bucharest, Romania;
| | - Rodica Marinescu
- Department of Orthopedics, University of Medicine and Pharmacology Carol Davila, 020021 Bucharest, Romania;
| |
Collapse
|
10
|
Santos MRC, Laureano RMS. COVID-19-Related Studies of Nonprofit Management: A Critical Review and Research Agenda. VOLUNTAS : INTERNATIONAL JOURNAL OF VOLUNTARY AND NONPROFIT ORGANIZATIONS 2021; 33:936-951. [PMID: 34866809 PMCID: PMC8629598 DOI: 10.1007/s11266-021-00432-9] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Accepted: 10/31/2021] [Indexed: 06/13/2023]
Abstract
UNLABELLED During crises such as the present coronavirus disease-19 (COVID-19) pandemic, nonprofits play a key role in ensuring support to improve the most vulnerable individuals' health, social, and economic conditions. One year into the COVID-19 pandemic, an extensive automated literature analysis was conducted of 154 academic articles on nonprofit management during the pandemic-all of which were published in 2020. This study sought to identify and systematize academics' contributions to knowledge about the crisis's impact on the nonprofit sector and to ascertain the most urgent directions for future research. The results provide policymakers, nonprofit practitioners, and scholars an overview of the themes addressed and highlight the important assistance academic researchers provide to nonprofits dealing with the COVID-19 pandemic. SUPPLEMENTARY INFORMATION The online version contains supplementary material available at 10.1007/s11266-021-00432-9.
Collapse
Affiliation(s)
- Márcia R. C. Santos
- ESCE, Instituto Politécnico de Setúbal, Setúbal, Portugal
- Information Sciences and Technologies and Architecture Research Center (ISTAR-IUL), Instituto Universitário de Lisboa (ISCTE-IUL), Lisboa, Portugal
| | - Raul M. S. Laureano
- Information Sciences and Technologies and Architecture Research Center (ISTAR-IUL), Instituto Universitário de Lisboa (ISCTE-IUL), Lisboa, Portugal
- Business Research Unit (BRU-IUL), Instituto Universitário de Lisboa (ISCTE-IUL), Lisboa, Portugal
| |
Collapse
|
11
|
Barrutia JM, Echebarria C. Effect of the COVID-19 pandemic on public managers' attitudes toward digital transformation. TECHNOLOGY IN SOCIETY 2021; 67:101776. [PMID: 34642513 PMCID: PMC8496943 DOI: 10.1016/j.techsoc.2021.101776] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/06/2021] [Revised: 10/02/2021] [Accepted: 10/05/2021] [Indexed: 05/26/2023]
Abstract
The COVID-19 pandemic has induced a process of digital acceleration and has likely changed the attitudes of local public managers toward information and communication technology (ICT). While this attitude change has been reasonably argued, it has not been systematically measured. This study narrows this gap by measuring the attitudes of public managers before and after the outbreak of the COVID-19 pandemic. Overall, this study finds that the pandemic has led public managers to be more confident in the capacity of ICT to help cities achieve their economic, social, and environmental goals and respond to challenges. Both explicit and implicit measures confirmed attitude changes. The explicit measures also indicated that the change in public managers' attitude toward ICT was similar to their change in attitude toward scientific progress and greater than their change in attitude toward other issues that have played a major role during the pandemic, namely, climate change, citizen participation, and privacy.
Collapse
Affiliation(s)
- Jose M Barrutia
- Institute of Applied Bussiness Economics, University of the Basque Country, Spain
| | - Carmen Echebarria
- Institute of Applied Bussiness Economics, University of the Basque Country, Spain
| |
Collapse
|
12
|
3D printing technologies for in vitro vaccine testing platforms and vaccine delivery systems against infectious diseases. Essays Biochem 2021; 65:519-531. [PMID: 34342360 DOI: 10.1042/ebc20200105] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/23/2021] [Revised: 06/21/2021] [Accepted: 07/05/2021] [Indexed: 11/17/2022]
Abstract
Recent advances in 3D printing (3DP) and tissue engineering approaches enable the potential application of these technologies to vaccine research. Reconstituting the native tissue or cellular microenvironment will be vital for successful evaluation of pathogenicity of viral infection and screening of potential vaccines. Therefore, establishing a reliable in vitro model to study the vaccine efficiency or delivery of viral disease is important. Here, this review summarizes two major ways that tissue engineering and 3DP strategies could contribute to vaccine research: (1) 3D human tissue models to study the response to virus can be served as a testbed for new potential therapeutics. Using 3D tissue platform attempts to explore alternative options to pre-clinical animal research for evaluating vaccine candidates. (2) 3DP technologies can be applied to improve the vaccination strategies which could replace existing vaccine delivery. Controlled antigen release using carriers that are generated with biodegradable biomaterials can further enhance the efficient development of immunity as well as combination of multiple-dose vaccines into a single injection. This mini review discusses the up-to-date report of current 3D tissue/organ models for potential vaccine potency and known bioengineered vaccine delivery systems.
Collapse
|
13
|
Koshta N, Devi Y, Patra S. Aerial Bots in the Supply Chain: A New Ally to Combat COVID-19. TECHNOLOGY IN SOCIETY 2021; 66:101646. [PMID: 34177005 PMCID: PMC8214327 DOI: 10.1016/j.techsoc.2021.101646] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/21/2021] [Revised: 06/14/2021] [Accepted: 06/16/2021] [Indexed: 05/09/2023]
Abstract
The rapid global spread of COVID-19 has caused disruptions in various supply chains and people's lives. At the same time, it has paved the way for drone technology (Aerial bots). With the countries gone into lockdown for an unspecified time, it is self-evident that people will run out of food, medicine, and other essentials because of the middleman's unavailability to move products from supply to demand point. Lack of medical infrastructure and distant testing laboratories is another challenge faced by the countries, which result in a delayed testing report leading to delay in medical treatment-such critical problems arising in the fight against COVID-19 highlight the need for improving the efficiency of supply chains. Recently used for commercial purposes, drone technology has already proved its utility in inventory and logistics management. Therefore, we argue that drones could be a viable option to improve the efficiency and effectiveness of the supply chains working for humanitarian aid to combat COVID-19. Specifically, the focus is on food, administrative, and healthcare supply chains that are the core to combat the pandemic. Moreover, in this article, we highlight various present and future application areas for drone technology, which could pave the way for future research and industry applications.
Collapse
Affiliation(s)
- Nitin Koshta
- Indian Institute of Management Kashipur, Kashipur, Udham Singh Nagar, Uttarakhand, 244713, India
| | - Yashoda Devi
- Indian Institute of Management Kashipur, Kashipur, Udham Singh Nagar, Uttarakhand, 244713, India
| | - Sabyasachi Patra
- Indian Institute of Management Kashipur, Kashipur, Udham Singh Nagar, Uttarakhand, 244713, India
| |
Collapse
|
14
|
Patel P, Gohil P. Role of additive manufacturing in medical application COVID-19 scenario: India case study. JOURNAL OF MANUFACTURING SYSTEMS 2021; 60:811-822. [PMID: 33204048 PMCID: PMC7659810 DOI: 10.1016/j.jmsy.2020.11.006] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/07/2020] [Revised: 11/09/2020] [Accepted: 11/09/2020] [Indexed: 05/17/2023]
Abstract
This paper reviews how the Additive Manufacturing (AM) industry played a key role in stopping the spread of the Coronavirus by providing customized parts on-demand quickly and locally, reducing waste and eliminating the need for an extensive manufacturer. The AM technology uses digital files for the production of crucial medical parts, which has been proven essential during the COVID-19 crisis. Going ahead, the 3D printable clinical model resources described here will probably be extended in various centralized model storehouses with new inventive open-source models. Government agencies, individuals, corporations and universities are working together to quickly development of various 3D-printed products especially when established supply chains are under distress, and supply cannot keep up with demand.
Collapse
Affiliation(s)
- Piyush Patel
- Mechanical Engineering Department, Faculty of Technology and Engineering, M.S. University, Baroda, 390001, Gujarat, India
| | - Piyush Gohil
- Mechanical Engineering Department, Faculty of Technology and Engineering, Maharaja Sayajirao University of Baroda, Gujarat, India
| |
Collapse
|
15
|
Budinoff HD, Bushra J, Shafae M. Community-driven PPE production using additive manufacturing during the COVID-19 pandemic: Survey and lessons learned. JOURNAL OF MANUFACTURING SYSTEMS 2021; 60:799-810. [PMID: 35068654 PMCID: PMC8759144 DOI: 10.1016/j.jmsy.2021.07.010] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/01/2021] [Revised: 06/14/2021] [Accepted: 07/07/2021] [Indexed: 05/21/2023]
Abstract
This study presents a detailed analysis of the production efforts for personal protective equipment in makerspaces and informal production spaces (i.e., community-driven efforts) in response to the COVID-19 pandemic in the United States. The focus of this study is on additive manufacturing (also known as 3D printing), which was the dominant manufacturing method employed in these production efforts. Production details from a variety of informal production efforts were systematically analyzed to quantify the scale and efficiency of different efforts. Data for this analysis was primarily drawn from detailed survey data from 74 individuals who participated in these different production efforts, as well as from a systematic review of 145 publicly available news stories. This rich dataset enables a comprehensive summary of the community-driven production efforts, with detailed and quantitative comparisons of different efforts. In this study, factors that influenced production efficiency and success were investigated, including choice of PPE designs, production logistics, and additive manufacturing processes employed by makerspaces and universities. From this investigation, several themes emerged including challenges associated with matching production rates to demand, production methods with vastly different production rates, inefficient production due to slow build times and high scrap rates, and difficulty obtaining necessary feedstocks. Despite these challenges, nearly every maker involved in these production efforts categorized their response as successful. Lessons learned and themes derived from this systematic study of these results are compiled and presented to help inform better practices for future community-driven use of additive manufacturing, especially in response to emergencies.
Collapse
Affiliation(s)
- Hannah D Budinoff
- Department of Systems and Industrial Engineering, University of Arizona, Tucson, AZ, United States
| | - Jannatul Bushra
- Department of Systems and Industrial Engineering, University of Arizona, Tucson, AZ, United States
| | - Mohammed Shafae
- Department of Systems and Industrial Engineering, University of Arizona, Tucson, AZ, United States
| |
Collapse
|
16
|
Mehedi IM, Shah HSM, Al-Saggaf UM, Mansouri R, Bettayeb M. Fuzzy PID Control for Respiratory Systems. JOURNAL OF HEALTHCARE ENGINEERING 2021; 2021:7118711. [PMID: 34257855 PMCID: PMC8253636 DOI: 10.1155/2021/7118711] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/31/2021] [Revised: 06/08/2021] [Accepted: 06/12/2021] [Indexed: 01/10/2023]
Abstract
This paper presents the implementation of a fuzzy proportional integral derivative (FPID) control design to track the airway pressure during the mechanical ventilation process. A respiratory system is modeled as a combination of a blower-hose-patient system and a single compartmental lung system with nonlinear lung compliance. For comparison purposes, the classical PID controller is also designed and simulated on the same system. According to the proposed control strategy, the ventilator will provide airway flow that maintains the peak pressure below critical levels when there are unknown parameters of the patient's hose leak and patient breathing effort. Results show that FPID is a better controller in the sense of quicker response, lower overshoot, and smaller tracking error. This provides valuable insight for the application of the proposed controller.
Collapse
Affiliation(s)
- Ibrahim M. Mehedi
- Department of Electrical and Computer Engineering (ECE), King Abdulaziz University, Jeddah 21589, Saudi Arabia
- Center of Excellence in Intelligent Engineering Systems (CEIES), King Abdulaziz University, Jeddah 21589, Saudi Arabia
| | - Heidir S. M. Shah
- Department of Electrical and Computer Engineering (ECE), King Abdulaziz University, Jeddah 21589, Saudi Arabia
| | - Ubaid M. Al-Saggaf
- Department of Electrical and Computer Engineering (ECE), King Abdulaziz University, Jeddah 21589, Saudi Arabia
- Center of Excellence in Intelligent Engineering Systems (CEIES), King Abdulaziz University, Jeddah 21589, Saudi Arabia
| | - Rachid Mansouri
- Laboratoire de Conception et Conduite des Systemes de Production (L2CSP), Tizi Ouzou, Algeria
| | - Maamar Bettayeb
- Electrical Engineering Department, University of Sharjah, Sharjah, UAE
| |
Collapse
|
17
|
Aydin A, Demirtas Z, Ok M, Erkus H, Cebi G, Uysal E, Gunduz O, Ustundag CB. 3D printing in the battle against COVID-19. EMERGENT MATERIALS 2021; 4:363-386. [PMID: 33585793 PMCID: PMC7868677 DOI: 10.1007/s42247-021-00164-y] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/01/2020] [Accepted: 01/12/2021] [Indexed: 05/03/2023]
Abstract
Coronavirus disease 2019 (COVID-19) that is SARS-CoV-2, previously called 2019-nCoV, is a kind of human infectious disease caused by severe acute respiratory syndrome coronavirus. Based on the prompt increase of human infection rate, COVID-19 outbreak was distinguished as a pandemic by the World Health Organization (WHO). By 2020, COVID-19 becomes a major health problem all around the world. Due to the battle against COVID-19, there are some adversities that are encountered with. The most significant difficulty is the lack of equipment for the COVID-19 battle. Lately, there is not sufficient personal protective equipment (PPE) for hospital workers on the front lines in this terrifying time. All around the world, hospitals are overwhelmed by the volume of patients and the lack of personal protective equipment including face masks, gloves, eye protection and clothing. In addition, the lack of nasal swabs, which are necessary components, that are used for testing is another issue that is being faced. There are a small number of respirators, which are emergency devices that help patients breathe for a short period of time. To overcome the limited number of equipment available, the foremost solution can be 3D printing that allows three-dimensional renderings to be realized as physical objects with the use of a printer and that revolutionized prototyping. Low-cost desktop 3D printers allow economical 3D models and guides but have less quality approvals. 3D printing is already well integrated into the process of COVID-19 battle by manufacturing the equipment that are convenient. The goals of this review are to explore the techniques of 3D printing for the equipment that are used for COVID-19 battle and evaluate the materials that are used for manufacturing and the manufactured equipment. Lastly, the advantages and disadvantages of 3D printing are figured out.
Collapse
Affiliation(s)
- Ayca Aydin
- Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, 34210 Istanbul, Turkey
| | - Zeynep Demirtas
- Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, 34210 Istanbul, Turkey
| | - Merve Ok
- Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, 34210 Istanbul, Turkey
| | - Huseyin Erkus
- Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, 34210 Istanbul, Turkey
| | - Gizem Cebi
- Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, 34210 Istanbul, Turkey
| | - Ebru Uysal
- Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, 34210 Istanbul, Turkey
- Vocational School of Health Care Services, Istanbul Yeni Yuzyil University, 34010 Istanbul, Turkey
- Center for Nanotechnology and Biomaterials Application and Research (NBUAM), Marmara University, 34722 Istanbul, Turkey
| | - Oguzhan Gunduz
- Center for Nanotechnology and Biomaterials Application and Research (NBUAM), Marmara University, 34722 Istanbul, Turkey
- Department of Metallurgical and Materials Engineering, Faculty of Technology, Marmara University, 34722 Istanbul, Turkey
| | - Cem Bulent Ustundag
- Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, 34210 Istanbul, Turkey
- Center for Nanotechnology and Biomaterials Application and Research (NBUAM), Marmara University, 34722 Istanbul, Turkey
| |
Collapse
|
18
|
Kantaros A, Laskaris N, Piromalis D, Ganetsos T. Manufacturing Zero-Waste COVID-19 Personal Protection Equipment: a Case Study of Utilizing 3D Printing While Employing Waste Material Recycling. CIRCULAR ECONOMY AND SUSTAINABILITY 2021; 1:851-869. [PMID: 34888557 PMCID: PMC8084590 DOI: 10.1007/s43615-021-00047-8] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/22/2021] [Accepted: 04/19/2021] [Indexed: 04/14/2023]
Abstract
COVID-19 pandemic outbreak dictated the extensive use of personal protective equipment (PPE) by the majority of the population and mostly by frontline professionals. This need triggered a sudden demand that led to a global shortage of available PPEs threatening to have an immense contribution to the virus contamination spread. In these conditions, the need for a local, flexible, and rapid manufacturing method that would be able to cope with the increased demand for PPE fabrication arose. 3D printing proved to be such a manufacturing technique since its working principles make it an ideal technology for local, decentralized production of PPEs meeting the local demands. While considered to be more environmentally friendly than conventional fabrication techniques and aligning well with the principles of sustainability and circular economy, 3D printing can produce waste as the result of potential failed prints and material used for the fabrication of support structures. This paper describes the case of utilizing pre-existing FDM 3D printing equipment in an academic facility for the production of PPEs (face shields) and their distribution according to local demands. The plastic wastes produced were forwarded to a recycling process that led to their conversion to 3D filament that would be returned to the academic facility as raw material for future 3D printing operations. The followed procedure minimized 3D printing waste and led to a zero-waste fabrication case that was initiated in a pandemic for a greater-good cause (production of COVID-19 fighting PPEs) while assimilating the values of sustainability and circular economy.
Collapse
Affiliation(s)
- Antreas Kantaros
- Department of Industrial and Product Design Engineering, University of West Attica, Athens, Greece
| | - Nikolaos Laskaris
- Department of Industrial and Product Design Engineering, University of West Attica, Athens, Greece
| | - Dimitrios Piromalis
- Department of Industrial and Product Design Engineering, University of West Attica, Athens, Greece
| | - Theodore Ganetsos
- Department of Industrial and Product Design Engineering, University of West Attica, Athens, Greece
| |
Collapse
|
19
|
Food safety, hygiene, and awareness during combating of COVID-19. ENVIRONMENTAL AND HEALTH MANAGEMENT OF NOVEL CORONAVIRUS DISEASE (COVID-19 ) 2021. [PMCID: PMC8237641 DOI: 10.1016/b978-0-323-85780-2.00002-0] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
Novel coronavirus is a family of viruses that usually leads to respiratory illness. This coronavirus pandemic has affected human life drastically, and there is a chance that this virus persists on raw foods of animal origin. Also, food that is served to the customers by retail sectors passes through different operational steps, which involves multiple touchpoints by the food handlers on the surface of the food or to the food directly. This may lead to the spreading of the coronavirus through the food sector if proper hygiene, sanitization, and disinfection, social distancing, and other preventive measures are not followed. This chapter will give an overview of the type of foodborne viruses and their effects on human health. It will also provide an understanding of the possibilities of transmitting coronavirus disease (COVID-19) through food and food packaging. The review will also focus on the preventive measures, hygiene practices, and safety precautions that should be adopted by the food handlers or food business owners to mitigate the risk of transmitting COVID-19 in the food service and retail sector. Essential aspects of the food safety management system with respect to COVID-19 will be discussed, which should be followed by all the food companies. Finally, the role of different dietary supplements and bioactive ingredients of foods and herbs will be discussed that are known to improve the human immune system, which will fight against the virus.
Collapse
|
20
|
Updated insight into COVID-19 disease and health management to combat the pandemic. ENVIRONMENTAL AND HEALTH MANAGEMENT OF NOVEL CORONAVIRUS DISEASE (COVID-19 ) 2021. [PMCID: PMC8237642 DOI: 10.1016/b978-0-323-85780-2.00017-2] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causes COVID-19 disease in humans and is the responsible viral agent for the currently ongoing pandemic. Early cases of COVID-19 were reported from Wuhan, Hubei province of China, the likely birthplace of this outbreak. Currently, over 92 million people in the globe are actively battling this virus, and over 2 million individuals have already succumbed to the disease. The high human-to-human transmission capacity of the virus is among the primary causes for such a rapid global spread of COVID-19. In humans, it causes acute to severe respiratory distress in the form of pneumonia. The presentation of clinical features of the disease ranges from mild in healthy adults to severe among individuals with weakened or immunocompromised immune systems and the elderly. Thus, increasing patient cases of COVID-19 warrants a growing demand for medical attention that is eventually overburdening our health care systems. Rapid detection of COVID-19 in suspected individuals and isolation are among the crucial intervention norms in health management strategies to control the COVID-19 pandemic, in addition to strict observance of public hygienic practices such as reduced public gathering, use of facial masks, and practicing of social distancing. This chapter provides an overview of the epidemiology of COVID-19 and the current classical health management strategies and issues to tackle this pandemic. It particularly highlights the role of standard as well as novel biomolecular diagnostic techniques as a tool for successful implementation of such public safety measures issued by medical policy makers and the governing bodies.
Collapse
|
21
|
Loh GH, Sotayo A, Pei E. Development and testing of material extrusion additive manufactured polymer–textile composites. FASHION AND TEXTILES 2021; 8:2. [PMCID: PMC7781653 DOI: 10.1186/s40691-020-00232-7] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/13/2020] [Accepted: 11/07/2020] [Indexed: 09/10/2023]
Abstract
The adoption of Additive Manufacturing (AM) has gradually transformed the fashion industry through innovation and technology over the last decade. Novel AM systems and techniques are continuously being developed, leading to the application of AM polymers with textiles and fabrics in the fashion industry. This work investigates the development and testing of polymer–textile composites using polylactic acid (PLA) filaments on synthetic mesh fabrics using direct material extrusion (ME). An aspect of this paper highlights the appropriate combination of printing material, textile substrate, and printer settings to achieve excellent polymer–textile adhesion. Details of the printing process to create polymer–textile composites are described, as are the interfacial strength results of the T-peel tests, and the observed failure modes post-testing. The peel strengths for different ME bonded polymer–textile composites are examined and used to identify the compatibility of materials. This work visualised the potential of direct ME of polymers onto textile fabrics as a material-joining approach for new textile functionalisation, multi-material composite explorations and innovative aesthetic print techniques. This work also adds to the limited knowledge of AM polymer–textile composites, which can provide helpful information for designers and researchers to develop new applications and facilitate future research development in smart embedded and programmable textiles.
Collapse
Affiliation(s)
- Giselle Hsiang Loh
- PhD Candidate, Department of Design, Brunel University London, Kingston Lane, Uxbridge, UB8 3PH UK
| | - Adeayo Sotayo
- Research Fellow, Department of Design, Brunel University London, Kingston Lane, Uxbridge, UB8 3PH UK
| | - Eujin Pei
- Senior Lecturer, Department of Design, Brunel University London, Kingston Lane, Uxbridge, UB8 3PH UK
| |
Collapse
|
22
|
Arora R, Arora PK, Kumar H, Pant M. Additive Manufacturing Enabled Supply Chain in Combating COVID-19. JOURNAL OF INDUSTRIAL INTEGRATION AND MANAGEMENT-INNOVATION AND ENTREPRENEURSHIP 2020. [DOI: 10.1142/s2424862220500244] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
Abstract
Additive manufacturing (AM) is a method in which three-dimensional structures are successively laid down to create a solid object. The inherent advantages of AM technology are successfully drafted and exploited by the different organization across the globe. During the time of pandemic i.e. COVID-19, 3D printing has come to rescue and has been used for manufacturing critical medical supplies. 3D printing has been used in manufacturing some of the critical items like ventilators valves, face shields, swabs, oxygen valves, hand sanitizer holders, 3-DP lung models, etc. The main reason for its success has been the ability of 3D printing to print locally by using digital designs and thus reducing the number of supply chain actors. Also, the ability of 3D printing to manufacture/print complex geometrical designs locally is the main reason for its successful adoption during COVID-19. In this paper, we have discussed how AM has come to the forefront in fighting this pandemic. Various AM techniques have played a critical role in bridging the supply chain gap in the medical industry and locally printing critical devices. There were certain apprehensions before the pandemic along with slow adoption but this pandemic has also increased the adoption of AM due to its ability to overcome the demand created by COVID-19.
Collapse
Affiliation(s)
| | - Pawan K Arora
- Galgotia College of Engineering and Technology, G B Nagar, India
| | - Harish Kumar
- National Institute of Technology Delhi, Delhi, India
| | - Meena Pant
- National Institute of Technology Delhi, Delhi, India
| |
Collapse
|