Al-MCM-41 catalyzed three-component Strecker-type synthesis of α-aminonitriles

The vital use of isocyanide-based multicomponent reactions (MCR) in chemical synthesis

Multicomponent (MCRs) reactions are classified as one-pot reaction where more than two starting materials are employed to form a single product that contains the building blocks of the starting components. MCRs are considered a convenient approach in synthetic chemistry and have many advantages over the traditional one or two-component reaction, by reducing the number of sequential multiple steps required and often producing better yields. This chapter dissects the use of isocyanide-based MCRs and the elegant chemistry that they offer to build useful scaffolds in the chemical synthetic field. In addition MCRs are considered as one of the recognisable options for increasing “greenness” during the synthesis of pharmaceutical and industrial products.

Nanostructured silicate catalysts for environmentally benign Strecker-type reactions: status quo and quo vadis

Chemical processes are usually catalytic transformations. The use of catalytic reagents can reduce the reaction temperature, decrease reagent-based waste, and enhance the selectivity of a reaction potentially avoiding unwanted side reactions leading to green technology. Chemical processes are also frequently based on multicomponent reactions (MCRs) that possess evident improvements over multistep processes. Both MCRs and catalysis tools are the most valuable principles of green chemistry. Among diverse MCRs, the three-component Strecker reaction (S-3-CR) is a particular transformation conducive to the formation of valuable bifunctional building blocks (α-amino nitriles) in organic synthesis, medicinal chemistry, drug research, and organic materials science. To be a practical synthetic tool, the S-3-CR must be achieved using alternative energy input systems, safe reaction media, and effective catalysts. These latter reagents are now deeply associated with nanoscience and nanocatalysis. Continuously developed, nanostructured silicate catalysts symbolize green pathways in our quest to attain sustainability. Studying and developing nanocatalyzed S-3-CR condensations as an important model will be suitable for achieving the current green mission. This critical review aims to highlight the advances in the development of nanostructured catalysts for technologically important Strecker-type reactions and to analyze this progress from the viewpoint of green and sustainable chemistry.

Sulfamic acid pyromellitic diamide-functionalized MCM-41 as a multifunctional hybrid catalyst for melting-assisted solvent-free synthesis of bioactive 3,4-dihydropyrimidin-2-(1H)-ones

This study introduces a practical approach to fabricate a novel hybrid acidic catalyst, namely sulfamic acid pyromellitic diamide-functionalized MCM-41 (MCM-41-APS-PMDA-NHSO₃H). Various techniques such as FTIR, TGA, XRD, BET, FESEM, and EDX were used to confirm its structural characteristics. The efficiency of the new MCM-41-APS-PMDA-NHSO₃H organosilica nanomaterials, as a heterogenous nanocatalyst, was examined in the synthesis of biologically active 3,4-dihydropyrimidin-2-(1H)-one derivatives under solvent-free conditions. It was found that the nanoporous MCM-41-APS-PMDA-NHSO₃H, demonstrating acidic nature and high surface area, can activate all the Biginelli reaction components to afford desired 3,4-dihydropyrimidin-2-(1H)-ones under solvent-free conditions in short reaction time. Furthermore, easy and quick isolation of the new introduced hybrid organosilica from the reaction mixture as well as its reusability with negligible loss of activity in at least five consecutive runs are another advantages of this green protocol.

A straightforward, environmentally beneficial synthesis of spiro[diindeno[1,2-b:2',1'-e]pyridine-11,3'-indoline]-2',10,12-triones mediated by a nano-ordered reusable catalyst

A library of new spiro[diindeno[1,2-b:2',1'-e]pyridine-11,3'-indoline]-2',10,12-trione derivatives has been prepared in an efficient, one-pot pseudo four-component method mediated by a reusable heterogeneous nano-ordered mesoporous SO3H functionalized-silica (MCM-41-SO3H) catalyst. Excellent yields, short reaction times, as well as convenient non-chromatographic purification of the products and environmental benefits such as green and metal-free conditions constitute the main advantages of the developed synthetic methodology. The obtained fused indole-indenone dyes would be of interest to pharmaceutical and medicinal chemistry. Furthermore, due to their sensitivity to pH changes, they could be used as novel pH indicators.

ZnO-nanorods Promoted Synthesis of α-amino Nitrile Benzofuran Derivatives using One-pot Multicomponent Reaction of Isocyanides

AIMS AND OBJECTIVE

In this work ZnO-nanorod (ZnO-NR) as reusable catalyst promoted Strecker-type reaction of 2,4-dihydroxyacetophenone, isopropenylacetylene, trimethylsilyl cyanide (TMSCN), primary amines and isocyanides at ambient temperature under solvent-free conditions and produced α-amino nitriles benzofuran derivatives in high yields. These synthesized compounds may have antioxidant ability.

MATERIALS AND METHODS

ZnO-NRs in these reactions were prepared according to reported article. 2,4-dihydroxyacetophenone 1 (2 mmol) and isopropenylacetylene 2 (2 mmol) were mixed and stirred for 30 min in the presence of ZnO-NR (10 mol%) under solvent-free conditions at room temperature. After 30 min, primary amine 3 (2 mmol) was added to the mixture gently and the mixture was stirred for 15 min. After this time TMSCN 4 (2 mmol) was added to the mixture and stirred for 15 min. After completion of the reaction, as indicated by TLC, isocyanides 5 was added to mixture in the presence of catalyst.

RESULTS

In the first step of this research, the reaction of 2,4-dihydroxyacetophenone 1, isopropenylacetylene 2, methyl amine 3a, trimethylsilyle cyanide 4 and tert-butyl isocyanides 5a was used as a sample reaction to attain the best reaction conditions. The results showed this reaction performed with catalyst and did not have any product without catalyst after 12 h.

CONCLUSION

In conclusion, we investigate multicomponent reaction of 2,4-dihydroxyacetophenone 1, isopropenylacetylene 2, primary amines 3, trimethylsilyl cyanide 4 and isocyanides along with ZnO-NRs as reusable catalyst at room temperature under solvent-free conditions which generates α-amino nitrile benzofuran derivatives in high yields. The advantages of our method are high atom economy, green reaction conditions, higher yield, shorter reaction times, and easy work-up, which are in good agreement with some principles of green chemistry. The compounds 8c exhibit excellent DPPH radical scavenging activity and FRAP compared to synthetic antioxidants BHT and TBHQ.

Nanostructured oxytyramine catalyst for the facile one-pot synthesis of cyclohexanecarbonitrile derivatives

A magnetic, recyclable heterogeneous organocatalyst, OT@Si@SPIONs, has been developed for the facile synthesis of cyclohexanecarbonitriles.

Magnetic solid sulfonic acid decorated with hydrophobic regulators: a combinatorial and magnetically separable catalyst for the synthesis of α-aminonitriles

A three-component, Strecker reaction of a series of aldehydes or ketones, amines, and trimethylsilyl cyanide for the synthesis of α-aminonitriles in the presence of a catalytic amount of a magnetic solid sulfonic acid catalyst, Fe3O4@SiO2@Me&Et-PhSO3H under solvent-free conditions have been investigated. This catalyst, with a combination of hydrophobicity and acidity on the Fe3O4@SiO2 core-shell of the magnetic nanobeads, as well as its water-resistant property, enabled easy mass transfer and catalytic activity in the Strecker reaction. The catalyst was easily separated by an external magnet and the recovered catalyst was reused in 6 successive reaction cycles without any significant loss of activity.

Aqueous formic acid: an efficient, inexpensive and environmentally friendly organocatalyst for three-component Strecker synthesis of α-aminonitriles and imines with excellent yields

Aqueous formic acid (37%) was effectively used as catalyst in Strecker reaction to afford α-aminonitriles and imines in high yields.

Sonochemical preparation and characterization of solid dodecyl perylene diimides/MCM-41

PL spectra of DDPDI/MCM-41 illustrated peak splits in protic solvent with different attachment sites of fluorophore, and linear change of red shift with permittivity of ambient after ultrasonic treatment.

Copper-catalyzed three- five- or seven-component coupling reactions: the selective synthesis of cyanomethylamines, N,N-bis(cyanomethyl)amines and N,N'-bis(cyanomethyl)methylenediamines based on a Strecker-type synthesis

We have demonstrated that a cooperative catalytic system comprised of CuCl and Cu(OTf)₂ could be used to effectively catalyse the three-, five- and seven-component coupling reactions of aliphatic or aromatic amines, formaldehyde, and trimethylsilyl cyanide (TMSCN), and selectively produce in good yields the corresponding cyanomethylamines, N,N-bis(cyanomethyl)amines and N,N'-bis(cyanomethyl)methylenediamines.

Al-MCM-41: An Efficient and Recyclable Heterogeneous Catalyst for the Synthesis ofβ-Hydroxy Thiocyanates in Water

An efficient and green procedure has been developed for the synthesis ofβ-hydroxy thiocyanate by the regioselective ring opening of epoxides with NH4SCN. The reaction was carried out in water without any organic solvent at40°C, using Al-MCM-41 (a mesoporous aluminosilicate) as catalyst. In this method, several types of epoxides carrying electron-donating or withdrawing groups were rapidly converted to the correspondingβ-hydroxy thiocyanates in good from excellent yields. Various advantages associated with this protocol include simple workup procedure, short reaction times, high product yields, greater regioselectivity, and easy recovery and reusability of the catalyst.

A truly green synthesis of α-aminonitriles via Strecker reaction

Background

The classical Strecker reaction is one of the simplest and most economical methods for the synthesis of racemic α-aminonitriles (precursor of α-amino acids) and pharmacologically useful compounds.

Results

Indium powder in water is shown to act as a very efficient catalyst for one-pot, three-component synthesis of α-aminonitriles from diverse amines, aldehydes and TMSCN. This general rapid method is applicable to a wide range of amines and aldehydes and produces products in excellent yield.

Conclusions

The present one-pot, three-component environmentally benign procedure for the synthesis of α-aminonitriles will find application in the synthesis of complex biologically active molecules.