Zinc selective chemosensor based on pyridyl-amide fluorescence

A pyrene-induced PET-based chemosensor for biologically important Zn(II) ions: application in test strips and live cell imaging studies

Cation and anion sensing is vital owing to their universal dispersion in ecosystems and biological functions. It has been shown that fluorescent receptors based on organic platforms are efficient for detecting a number of ions and have many advantages such as low cost, superior sensitivity and simplicity in installation. This study demonstrates the design and synthesis of a novel receptor (E)-3-[(3,5-di-tert-butyl-2-hydroxybenzylidene)amino]-2-(pyren-1-yl)-2,3-dihydroquinazolin-4(1H)-one (DTQ) for the rapid recognition of Zn(II) ions. DTQ exhibited a significant fluorometric "turn-on" characteristic towards Zn(II) at λmax 444 nm in aqueous acetonitrile by inhibiting the photo-induced electron transfer (PET) and -CN- process. The ESI-MS analysis and Job's plot experimental results confirmed stoichiometric 1 : 1 complex formation between DTQ and Zn(II). Fluorometric investigations revealed the detection limit and association constant of DTQ towards Zn(II), which were found to be 13.4 nM and 1.47 × 105 M-1, respectively. DTQ was employed to sense Zn(II) on low-cost test strips. The present research findings imply that DTQ can function as an effective sensor for Zn(II).

A dual-function fluorescence 'turn-on' probe that allows Zn (II) bioimaging and quantification of water in the organic solvent

Herein, a Eugenol-derived fluorescence 'turn-on' probe FLHE was synthesized by condensing 2-((3-(trifluoromethyl)phenyl)amino)benzohydrazide with 5-allyl-2-hydroxy-3-methoxybenzaldehyde. FLHE demonstrated very low fluorescence in the studied organic solvents of varying polarities. However, upon titration with Zn2+ in HEPES buffer (pH = 7.4, 50% ACN, v/v), FLHE showed 40-fold higher fluorescence signals indicating the formation of the FLHE-Zn2+ complex. The fluorescence turn-on phenomenon upon FLHE-Zn2+ complex formation results from a chelation-enhanced fluorescence (CHEF) effect. The FLHE-Zn2+ complexation demonstrated a stokes shift of 156 nm (λex = 350 nm, λem = 506 nm) and an about 33-fold increase in the quantum yield (FLHE, Φ = 0.007; FLHE-Zn2+ complex, Φ = 0.23). The binding constant (Ka) determined by the Benesi-Hildebrand plot for interaction between FLHE and Zn2+ was 5.33 × 103 M-1. FLHE demonstrated a LOD of 31.8 nM for detecting Zn2+ in the environmental samples without interference from other cations and anions. FLHE-based paper strip (FLHE-PS) assay was developed to quantify the Zn2+ ions in water and the water content of organic solvent. FLHE-PS allows the detection of Zn2+ in aqueous solutions with a LOD of 63.2 nM and quantifying water in acetonitrile with a LOD of 0.14%. These results indicate that the FLHE has high applicability for detecting Zn2+ in living cells and environmental samples and detecting the presence of water in the organic solvents.

Pomegranate Punica granatum peel waste as a naked-eye natural colorimetric sensor for the detection and determination of Fe+3 and I- ions in water

The utilization of renewable and abundant agricultural waste such as Pomegranate (Punica granatum L.) peel extract has been developed wherein a simple extraction of dried peel in water offered a natural sensor; ensuing yellowish solution comprising phenolic compounds reacted explicitly to detect Fe⁺³ and I^- solutions by naked-eye. The UV-Vis absorption spectrum of the resulting extracted mixture was drastically changed toward the longer wavelengths only after the addition of the Fe³⁺ and I^- while there was no discernible spectral change due to the addition of a broad range of other common cations and anions. In the case of Fe³⁺ and I^-, the transformation can be followed by the naked eye in the concentration range of 5 × 10^-4 M and 1 × 10^-2 M, respectively. An acceptable and reasonable detection with 47.05426 μM efficiency was attained in comparison to other Fe³⁺ indicators such as ferroin.

A Review on Organic Colorimetric and Fluorescent Chemosensors for the Detection of Zn(II) Ions

Organic compounds display several electronic and structural features which enable their application in various fields, ranging from biological to non-biological. These compounds contain heteroatoms like sulfur, nitrogen and, oxygen, which provide coordination sites to act as ligands in the field of coordination chemistry and are used as chemosensors to detect various metal ions. This review article covers different organic compounds including Schiff bases, thiourea, pyridine, rhodamine, triazole, pyrene, coumarin, imidazole, diaminomaleonitrile, naphthoxazole, pyrimidine, thiophene, thioether, and other functional groups based chemosensors that contain heteroatoms like sulfur, nitrogen and, oxygen for fluorimetric and colorimetric detection of Zn(II) ions in different environmental, agricultural, and biological samples. Further, the sensing performances of these chemosensors have been compared and discussed which could help the readers for the future design of organic fluorescent and colorimetric chemosensors for the detection of Zn(II) ions. We hope this study will support the new thoughts to design a simple, efficient, selective, and sensitive chemosensor for the detection of Zn(II) ions in different samples (environmental, agricultural, and biological).

Highly Efficient and Selective Visible-Light Driven CO2 Reduction by Two Co-Based Catalysts in Aqueous Solution

Photocatalytic CO₂ reduction has been considered as a promising approach to solve energy and environmental problems. Nevertheless, developing inexpensive photocatalysts with high efficiency and selectivity remains a big challenge. In this study, two Co-based complexes [Co₂(L¹)Cl₂] (1-Co) and [Co(L²)Cl] (2-Co) were synthesized by treating two DPA-based (DPA: dipicolylamine) ligands with Co²⁺, respectively. Under visible-light irradiation, the performance of 1-Co as a homogeneous photocatalyst for CO₂ reduction in aqueous media has been explored by using [Ru(phen)₃]²⁺ as a photosensitizer, and triethylolamine (TEOA) as a sacrificial reductant. 1-Co shows high photocatalytic activity for CO₂-to-CO conversion, corresponding to the high TON_CO of 2600 and TOF_CO of 260 h^-1 (TON_CO = turnover number for CO; TOF_CO = turnover frequency for CO). High selectivity of 97% for CO formation is also achieved. The control experiments catalyzed by 2-Co demonstrated that two Co(II) centers in 1-Co may operate independently and activate one CO₂ molecule each. Furthermore, the proposed mechanism of 1-Co for photocatalytic CO₂ reduction has been investigated via electrochemical analysis, a series of quenching experiments, and density functional theory calculations.

A Conjugated Polymer Fluorescent Sensor for Continuous Identification of Copper(II) and Pyrophosphate in Blood Serum and Synovial Fluid

A novel "on-off-on" super-sensitive conjugated polymer fluorescence sensor (PPE-DPA) was developed and it was applied to realize the continuous recognition of Cu²⁺ and pyrophosphate (PPi). The fluorescence intensity decreased linearly with the change of Cu²⁺ from 0.05 to 5.0 μmol L^-1 and the limit of detection was 24 nmol L^-1. The fluorescence intensity was linearly enhanced with the increase of PPi from 0.5 to 12.0 μmol L^-1 and the limit of detection was 230 nmol L^-1. In addition, this method was applied to detect PPi in the blood serum and synovial fluid of patients with arthritis and satisfactory results were obtained. Thus, the PPE-DPA is not only an effective tool for detecting Cu²⁺ and PPi in samples, but also presents a potential way to diagnose arthritis.

A multi-analyte responsive chemosensor vanilinyl Schiff base: fluorogenic sensing of Zn(ii), Cd(ii) and I−

A single fluorescence probe recognizes multiple ions and grabs the great attention of scientists.

Design and application of a fluorogenic receptor for selective sensing of cations, small neutral molecules, and anions

An unprecedented single multi-analyte fluorogenic receptor, a sodium salt of N-(methyl-2-thiophenyl)-tyrosine (NaHTyrthio), is reported for the selective sensing of cations (Cu²⁺), small neutral molecules (nitrobenzene and aniline) and anions (F⁻) by variable spectral responses.

Terpyridine derivatives as “turn-on” fluorescence chemosensors for the selective and sensitive detection of Zn2+ ions in solution and in live cells

A terpyridine based compound L1 was designed and synthesized as an “off–on” chemosensor for the detection of Zn²⁺.

A highly sensitive turn-on fluorescent chemosensor for recognition of Zn2+ and Hg2+ and applications

A fluorescence probe has been designed and synthesized, and applied with a combined theoretical and experimental study. Research suggests that the probe can be used to sense Zn²⁺ and Hg²⁺ through selective turn-on fluorescence responses in the aqueous HEPES buffer (0.05M, pH=7.4). The limit of detection (LOD) were determined as 1.46×10^-7M (Zn²⁺) and 2.50×10^-7M (Hg²⁺). Moreover, based on DFT, the geometry optimizations of probe 1, [1-Hg²⁺] complex and [1-Zn²⁺] complex were carried out using the Gaussian 09 program, in which the B3LYP function was used. The electronic properties of free probe 1 and the metal complexes were studied based on the Natural Bond Orbital (NBO) analyses. The probe 1 has also been successfully applied to detection of Zn²⁺ and Hg²⁺ in living cells.

Luminescent chemosensors by using cyclometalated iridium(iii) complexes and their applications

Luminescent metal complexes have found increasing use in multiple areas of science and technology, including in chemosensing, light-emitting devices and photochemistry. In particular, the use of cyclometalated iridium(iii) complexes as chemosensors has received increasing attention in the recent literature. Phosphorescent metal complexes enjoy a number of advantages (e.g., long-lived phosphorescence, high quantum efficiency and modular syntheses) that render them as suitable alternatives to organic dyes for sensing a variety of analytes. This review describes recent examples of cyclometalated iridium(iii) complexes that act as luminescent chemosensors for cations, anions or small molecules.

A Colorimetric and Fluorescent Chemosensor for the Selective Detection of Cu2+ and Zn2+ Ions

A new bi-functional chemosensor 1 based on 3,5-dichlorosalicylaldehyde and 2-(methylthio)aniline has been synthesized. It can detect Cu²⁺ with a color change from pale yellow to dark yellow in aqueous solution. The selective mechanism of 1 for Cu²⁺ was proposed to be the enhancement of the intramolecular charge transfer (ICT) band, which was explained by theoretical calculations. The sensor 1 could be used to detect and quantify Cu²⁺ in water samples. In addition, the sensor 1 displayed "turn-on" fluorescence response only to Zn²⁺, based on an effect of chelation-enhanced fluorescence (CHEF). Therefore, 1 can serve as a 'single sensor for two different targets' with dual modes.

A novel cyclometalated Ir(iii) complex based luminescence intensity and lifetime sensor for Cu2+

A novel green luminescent complex [Ir(dfppy)₂(bpy-BiDPA)]PF₆ was prepared for the reversible detection of Cu²⁺.

A novel pyrazole based single molecular probe for multi-analyte (Zn2+ and Mg2+) detection in human gastric adenocarcinoma cells

A newly designed fluorescent sensor 5-methyl-1H-pyrazole-3-carboxylic acid (6-methoxy-naphthalen-2-ylmethylene)-hydrazide (PYN) shows excellent selectivity and sensitivity with a fluorescence enhancement towards Zn²⁺ and Mg²⁺ ions in aqueous acetonitrile solution.

Fluorescence switching method for cascade detection of salicylaldehyde and zinc(II) ion using protein protected gold nanoclusters

A new fluorescence switching sensor for cascade detection of salicylaldehyde (SA) and Zinc(II) ion was developed based on bovine serum albumin protected gold nanoclusters (BSA-AuNCs). In the detection, SA interacted with amino groups of BSA-AuNCs, inducing simultaneous formation of fluorescent Schiff base and fluorescence quenching of AuNCs. Zn(II) could further strongly coordinate with the Schiff base ligands, leading to blue-shift and increase of the fluorescence from Schiff base-metal coordination complexes and simultaneous recovery of fluorescence from AuNCs. The new fluorescence switching sensor for Zn(2+) detection has advantages of simplicity, rapidity, naked-eye detection, high sensitivity and selectivity. The linear range of the method for Zn(2+) detection is from 0.1 μM to 100 μM with the limit of detection (LOD) of 29.28 nM. In practical samples, the recoveries of the samples ranged from 99.63% to 100.58%.

Multiple target chemosensor: a fluorescent sensor for Zn(ii) and Al(iii) and a chromogenic sensor for Fe(ii) and Fe(iii)

A multifunctional fluorescent and colorimetric chemosensor for Zn²⁺, Al³⁺, Fe²⁺ and Fe³⁺ was designed and synthesized.

Synthesis and physiochemical properties of novel gemini surfactants with phenyl-1,4-bis(carbamoylmethyl) spacer

A series of novel gemini surfactants, namely, phenyl-1,4-bis[(carbamoylmethyl) N,N-(dimethylalkyl ammonium chloride)] (a, b and c), was synthesized systematically and characterized by FTIR, ¹H NMR, ¹³C NMR and MS.

A simple pincer-type chemosensor for reversible fluorescence turn-on detection of zinc ion at physiological pH range

A dihydrazone based pincer-type chemosensor (Y) which could detect zinc at physiological pH range with reversible fluorescence “Off–On–Off”.

A highly selective CHEF-type chemosensor for monitoring Zn2+ in aqueous solution and living cells

A new quinolone-based chemosensor was synthesized and successfully applied to quantify and image Zn²⁺ in water samples and living cells.

A cap-type Schiff base acting as a fluorescence sensor for zinc(II) and a colorimetric sensor for iron(II), copper(II), and zinc(II) in aqueous media

A simple and low cost chemosensor is described. This sensor could simultaneously detect three biologically important metal ions through fluorogenic (Zn(2+)) and chromogenic (Fe(2+), Cu(2+), and Zn(2+)) methods in aqueous solution. The sensor could function as a "turn-on" fluorescence receptor only to Zn(2+) ions. In addition, the sensor could be successfully applied to the detection of intracellular Zn(2+). Meanwhile, the sensor displayed an obvious red color upon selective binding with Fe(2+). Therefore, the sensor could serve as a useful tool for the discrimination of Fe(2+) from Fe(3+) in aqueous media. Moreover, the sensor also showed color changes from yellow to colorless upon selective binding with Zn(2+) and Cu(2+), respectively. The detection limit of the sensor for Cu(2+) (1.5 μM) is far below the guidelines of the World Health Organization (30 μM) as the maximum allowable copper concentration in drinking water, and therefore it is capable of being a practical system for the monitoring of Cu(2+) concentrations in aqueous samples. These results provide a new approach for selectively recognizing the most important three trace elements in the human body simultaneously, for Zn(2+) by emission spectra and Fe(2+), Cu(2+), and Zn(2+) by the naked eye.

A highly selective quinoline-based fluorescent sensor for Zn(II)

A quinoline-based simple receptor (bis(2-quinolinylmethyl)benzylamine = 1) as a Zn(2+) selective fluorescent chemosensor showed a large fluorescent enhancement with a blue shift in the presence of Zn(2+) which is attributed to a chelation enhanced fluorescence (CHEF) effect with inhibition of a photoinduced electron transfer (PET) process of 1. In particular, this receptor could clearly distinguish Zn(2+) from Cd(2+). The binding mode of 1 and Zn(2+) was found to be a 1:1 and confirmed by Job plot, (1)H NMR titration and ESI-mass spectrometry analysis.

A ratiometric fluorescent hydrogel sensor for zinc(ii) based on a two fluorophore approach

A hydrogel sensor has been developed to measure the concentration of Zn(ii) upon swelling in aqueous buffer.

A single colorimetric sensor for multiple target ions: the simultaneous detection of Fe2+ and Cu2+ in aqueous media

The receptor 1 provides a novel approach for the simultaneous colorimetric recognition of two metal ions Fe²⁺ and Cu²⁺.

A single chemosensor for multiple analytes: fluorogenic detection of Zn2+ and OAc− ions in aqueous solution, and an application to bioimaging

A single fluorescent chemosensor 1 for multiple analytes (Zn²⁺ and OAc⁻) has been developed and it can monitor Zn²⁺ ions in living cells.