Room temperature Ullmann type C–O and C–S cross coupling of aryl halides with phenol/thiophenol catalyzed by CuO nanoparticles

Copper supported silica-based nanocatalysts for CuAAC and cross-coupling reactions

Recent advances in Cu/SiO2-based heterogeneous catalysts for click reaction, C–N, C–S, and C–O coupling reactions are reviewed and summarized.

Copper nanocatalysts applied in coupling reactions: a mechanistic insight

Copper-based nanocatalysts have seen great interest for use in synthetic applications since the early 20th century, as evidenced by the exponential number of contributions reported (since 2000, more than 48 000 works published out of about 81 300 since 1900; results from SciFinder using "copper nanocatalysts in organic synthesis" as keywords). These huge efforts are mainly based on two key aspects: (i) copper is an Earth-abundant metal with low toxicity, leading to inexpensive and eco-friendly catalytic materials; and (ii) copper can stabilize different oxidation states (0 to +3) for molecular and nanoparticle-based systems, which promotes different types of metal-reagent interactions. This chemical versatility allows different pathways, involving radical or ionic copper-based intermediates. Thus, copper-based nanoparticles have become convenient catalysts, in particular for couplings (both homo- and hetero-couplings), transformations that are involved in a remarkable number of processes affording organic compounds, which find interest in different fields (medicinal chemistry, natural products, drugs, materials, etc.). Clearly, this richness in reactivity makes understanding the mechanisms more complex. The present review focuses on the analysis of reported contributions using monometallic copper-based nanoparticles as catalytic precursors applied in coupling reactions, paying attention to those shedding light on the reaction mechanism.

Aerobic copper-promoted oxidative dehydrosulfurative carbon–oxygen cross-coupling of 3,4-dihydropyrimidine-1H-2-thiones with alcohols

An aerobic Cu-promoted oxidative dehydrosulfurative carbon–oxygen cross-coupling of 3,4-dihydropyrimidin-1H-2-thiones (DHPMs) with both aliphatic and aromatic alcohols is described. Together with the ready availability of DHPMs and both alcohols, the method furnishes facile access to biologically valuable 2-alkoxypyrimidines with rapid diversification.

A wide range of readily available DHPMs and alcohols makes the presented reaction an attractive method to access biologically valuable 2-alkoxypyrimidine derivatives with rapid diversification.

Recent Advancement of Ullmann Condensation Coupling Reaction in the Formation of Aryl-Oxygen (C-O) Bonding by Copper-Mediated Catalyst

Transition metal-catalyzed chemical transformation of organic electrophiles and organometallic reagents belong to the most important cross coupling reaction in organic synthesis. The biaryl ether division is not only popular in natural products and synthetic pharmaceuticals but also widely found in many pesticides, polymers, and ligands. Copper catalyst has received great attention owing to the low toxicity and low cost. However, traditional Ullmann-type couplings suffer from limited substrate scopes and harsh reaction conditions. The introduction of homogeneous copper catalyst with presence of bidentate ligands over the past two decades has totally changed this situation as these ligands enable the reaction promoted in mild condition. The reaction scope has also been greatly expanded, rendering this copper-based cross-coupling attractive for both academia and industry. In this review, we will highlight the latest progress in the development of useful homogeneous copper catalyst with presence of ligand and heterogeneous copper catalyst in Ullmann type C-O cross-coupling reaction. Additionally, the application of Ullmann type C-O cross coupling reaction will be discussed.

Ruthenium(II)-Catalyzed Regioselective Ortho C-H Allenylation of Electron-Rich Aniline and Phenol Derivatives

Ortho C-H allenylation of electron-rich benzene derivatives with propargylic alcohol derivatives has been a challenge, due to their great innate tendency toward a para C-H allenylation via an SN₂'-type substitution process. Here, we described a Ru(II)-catalyzed regioselective ortho C-H allenylation of electron-rich aniline and phenol derivatives, which allows the previously challenging synthesis of a broad range of ortho allenylated aniline and phenol derivatives. More significantly, highly optically active fully substituted allenes can also be prepared with high enantiomeric excess via a highly efficient chirality transfer. No para C-H allenylation product was observed in the current catalytic system, thus showing a complete reversibility of the regioselectivity.

Room temperature nickel-catalyzed cross-coupling of aryl-boronic acids with thiophenols: synthesis of diarylsulfides

A mild and easy to operate NiCl₂/2,2′-bipyridine-catalyzed cross-coupling of thiophenols with arylboronic acids has been developed for the synthesis of symmetric and unsymmetric diarylsulfides at room temperature and in air.

Diaryl ethers synthesis: nano-catalysts in carbon-oxygen cross-coupling reactions

The diaryl ether moiety is not only prevalent in a significant number of natural products and synthetic pharmaceuticals but also widely found in many pesticides, polymers, and ligands. Ullmann-type cross-coupling reactions between phenols and aryl halides are regarded as one of the most important methods for the synthesis of this important and versatile structural motif. In recent years, the use of nano-sized metal catalysts in this coupling reaction has attracted a lot of attention because of these catalysts with their high surface-to-volume ratio, high surface energy, and reactive morphology allows for rapid C-O bond formation under mild and ligand-free conditions. In this review we will highlight the power of these catalysts in Ullmann-type C-O cross-coupling reactions.

Iron Oxide-Cobalt Nanocatalyst for O-tert-Boc Protection and O-Arylation of Phenols

Efficient and general protocols for the O-tert-boc protection and O-arylation of phenols were developed in this paper using a recyclable magnetic Fe₃O₄-Co₃O₄ nanocatalyst (Nano-Fe-Co), which is easily accessible via simple wet impregnation techniques in aqueous mediums from inexpensive precursors. The results showed the catalysts were well characterized by XRD (X-ray Diffraction), ICP-AES (Inductive Coupled Plasma Atomic Emission Spectroscopy), TEM (Transmission Electron Microscopy), TOF-SIMS (Time-Of-Flight Secondary Ion Mass Spectrometry) and XPS (X-ray Photoelectron Spectroscopy). The O-tert-boc protection and O-arylation of phenols was accomplished in good to excellent yields (85–95%) and the catalyst was reusable and recyclable with no loss of catalytic activity for at least six repetitions.

Recent advances in synthetic methodologies for transition metal-free Ullmann condensation reactions

Different methodologies for transition metal-free Ullmann condensation reactions.

Formation of C–C, C–S and C–N bonds catalysed by supported copper nanoparticles

Copper nanoparticles on different supports are effective reusable catalysts for the palladium- and ligand-free coupling of aryl halides with alkynes, thiols and azoles.

A magnetically recyclable iron oxide-supported copper oxide nanocatalyst (Fe3O4–CuO) for one-pot synthesis of S-aryl dithiocarbamates under solvent-free conditions

A convenient preparation of S-aryl dithiocarbamates from amine, carbon disulfide and aryl iodide was developed by using the Fe₃O₄–CuO nanocatalyst under solvent free conditions.

Sulfides Synthesis: Nanocatalysts in C–S Cross-Coupling Reactions

The C–S cross-coupling reaction of aryl halides with thiols or sulfur sources is a key and valuable synthetic transformation in chemistry and medicine as well as in biology, and the development of novel efficient synthetic protocols for the synthesis of the corresponding products (sulfides) is highly desired. Among a wide range of catalysts used in C–S coupling reactions, metallic nanocatalysts have attracted notable interest. Herein, we summarize recent breakthroughs in the arena of metal nanocatalysts employed in C–S cross-coupling reactions with the goal of stimulating further progress in this field. This review is divided into three main sections according to the nature of the metal nanocatalysts discussed. The first section focuses on naked or purely metallic catalysts in nano-size, such as Cu, Pd, Ni, and In. The second section focuses on the role of Fe3O4 magnetic nanoparticles and mesoporous silica nanomaterials, such as MCM-41 and SBA-15, as catalyst supports. Finally, the third section focuses on the catalytic activities of copper ferrite nanoparticles in C–S cross-coupling reactions. Additionally, the recovery and reusability of the nanocatalyst, which are very important from commercial and economical points of view, are comprehensively discussed in this review.

Diffused sunlight driven highly synergistic pathway for complete mineralization of organic contaminants using reduced graphene oxide supported photocatalyst

Diffused sunlight is found to be an effective light source for the efficient degradation and mineralization of organic pollutant (methyl orange as a probe) by sono-photocatalytic degradation using reduced graphene oxide (rGO) supported CuO-TiO2 photocatalyst. The prepared catalysts are characterized by XRD, XPS, UV-vis DRS, PL, photoelectrochemical, SEM-EDS and TEM. A 10 fold synergy is achieved for the first time by combining sonochemical and photocatalytic degradation under diffused sunlight. rGO loading augments the activity of bare CuO-TiO2 more than two fold. The ability of rGO in storing, transferring, and shuttling electrons at the heterojunction between TiO2 and CuO facilitates the separation of photogenerated electron-hole pairs, as evidenced by the photoluminescence results. The complete mineralization of MO and the by-products within a short span of time is confirmed by TOC analysis. Further, hydroxyl radical mediated degradation under diffused sunlight is confirmed by LC-MS. This system shows similar activity for the degradation of methylene blue and 4-chlorophenol indicating the versatility of the catalyst for the degradation of various pollutants. This investigation is likely to open new possibilities for the development of highly efficient diffused sunlight driven TiO2 based photocatalysts for the complete mineralization of organic contaminants.

Application of nickel ferrite and cobalt ferrite magnetic nanoparticles in C–O bond formation: a comparative study between their catalytic activities

Magnetic reusable nickel- and cobalt ferrite nanoparticles were used as catalysts for the first time in the C–O coupling reaction successfully.

Magnetically retrievable lepidocrocite supported copper oxide nanocatalyst (Fe–CuO) for N-arylation of imidazole

A novel magnetically separable Fe–CuO is prepared by a simple precipitation method and is found to be an effective and reusable heterogeneous catalyst for ligand-free N-arylation reaction.

Copper catalysed Ullmann type chemistry: from mechanistic aspects to modern development

Cu-catalysed arylation reactions devoted to the formation of C-C and C-heteroatom bonds (Ullmann-type couplings) have acquired great importance in the last decade. This review discusses the history and development of coupling reactions between aryl halides and various classes of nucleophiles, focusing mostly on the different mechanisms proposed through the years. Selected mechanistic investigations are treated more in depth than others. For example, evidence in favour or against radical mechanisms is discussed. Cu(I) and Cu(III) complexes involved in the Ullmann reaction and N/O selectivity in aminoalcohol arylation are discussed. A separate section has been dedicated to the synthesis of heterocyclic rings through intramolecular couplings. Finally, recent developments in green chemistry for these reactions, such as reactions in aqueous media and heterogeneous catalysis, have also been reviewed.

Fabrication of magnetic amino-functionalized nanoparticles for S-arylation of heterocyclic thiols

The aminosilane coupling agent and polyethylene imine-600 were loaded onto magnetic nanoparticles to obtain magnetic nanoligands (MNLs) A, B, C and D.

Oxygen nucleophiles as reaction partners in photoinduced, copper-catalyzed cross-couplings: O-arylations of phenols at room temperature

Most copper-catalyzed cross-couplings require an elevated reaction temperature.

Disulfides as efficient thiolating reagents enabling selective bis-sulfenylation of aryl dihalides under mild copper-catalyzed conditions

Selective bis-sulfenylation reactions of aryl dihalides have been achieved by copper-catalyzed C–S coupling reactions under mild conditions of refluxing EtOH (80 °C).