The effect of physiologically relevant dynamic shear stress on platelet and endothelial cell activation

Transient low shear-stress preconditioning influences long-term endothelial traction and alignment under high shear flow

Endothelial cells (ECs) within the vascular system encounter fluid shear stress (FSS). High, laminar FSS promotes vasodilation and anti-inflammatory responses, whereas low or disturbed FSS induces dysfunction and inflammation. However, the adaptation of endothelial cells (ECs) to dynamically changing FSS patterns remains underexplored. Here, by combining traction force microscopy with a custom flow chamber, we examined human umbilical vein endothelial cells adapting their traction during transitions from short-term low shear to long-term high shear stress. We discovered that the initial low FSS elevates the traction by only half of the amount in response to direct high FSS even after flow changes to high FSS. However, in the long term under high FSS, the flow started with low FSS triggers a substantial second rise in traction for over 10 h. In contrast, the flow started directly with high FSS results in a quick traction surge followed by a huge reduction below the baseline traction in <30 min. Importantly, we find that the orientation of traction vectors is steered by initial shear exposure. Using Granger causality analysis, we show that the traction that aligns in the flow direction under direct high FSS functionally causes cell alignment toward the flow direction. However, EC traction that orients perpendicular to the flow that starts with temporary low FSS functionally causes cell orientation perpendicular to the flow. Taken together, our findings elucidate the significant influence of initial short-term low FSS on lasting changes in endothelial traction that induces EC alignment.NEW & NOTEWORTHY In our study, we uncover that preconditioning with low shear stress yields enduring impacts on endothelial cell traction and orientation, persisting even after transitioning to high-shear conditions. Using Granger causality analysis, we demonstrate a functional link between the direction of cell traction and subsequent cellular alignment across varying shear environments.

Platelet and endothelial cell responses under concurrent shear stress and tensile strain

Thrombosis can lead to significant mortality and morbidity. Both platelets and vascular endothelial cells play significant roles in thrombosis. Platelets' response to blood flow-induced shear stress can vary greatly depending on shear stress magnitude, pattern and shear exposure time. Endothelial cells are also sensitive to the biomechanical environment. Endothelial cell activation and dysfunction can occur under low oscillatory shear stress and low tensile strain. Platelet and endothelial cell interaction can also be affected by mechanical conditions. The goal of this study was to investigate how blood flow-induced shear stress, vascular wall tensile strain, platelet-endothelial cell stress history, and platelet-endothelial cell interaction affect platelet thrombogenicity. Platelets and human coronary artery endothelial cells were pretreated with physiological and pathological shear stress and/or tensile strain separately. The pretreated cells were then put together and exposed to pulsatile shear stress and cyclic tensile strain simultaneously in a shearing-stretching device. Following treatment, platelet thrombin generation rate, platelet and endothelial cell activation, and platelet adhesion to endothelial cells was measured. The results demonstrated that shear stress pretreatment of endothelial cells and platelets caused a significant increase in platelet thrombin generation rate, cell surface phosphatidylserine expression, and adhesion to endothelial cells. Shear stress pretreatment of platelets and endothelial cells attenuated endothelial cell ICAM-1 expression under stenosis conditions, as well as vWF expression under recirculation conditions. These results indicate that platelets are sensitized by prior shearing, while in comparison, the interaction with shear stress-pretreated platelets may reduce endothelial cell sensitivity to pathological shear stress and tensile strain.

Vascular function: a key player in hypertension

The major functions of the arterial system are to "efficiently deliver blood to the peripheral organs and maintain vascular homeostasis". Both the endothelial and medial layer contribute to the three major functions, namely, conversion of pulsatile to steady blood flow, appropriate distribution of blood flow to the target organs, and vascular protection and homeostasis. Vascular dysfunction contributes to the development of cardiovascular diseases through a combination of several mechanisms, including impaired coronary perfusion, cardiac systolic/diastolic dysfunction, microvascular damage, and abnormal hemodynamics in the arterial tree. The representative marker of endothelial function is flow-mediated vasodilatation and that of the medial layer function is pulse wave velocity, and that of the blood supply function of the arterial tree is the ankle-brachial pressure index. In hypertension, vascular dysfunction could also lead to the development of isolated systolic hypertension, isolated diastolic hypertension, and systolic/diastolic hypertension. Vascular dysfunction is involved in a vicious cycle with abnormal blood pressure variability. Furthermore, a vicious cycle may also exist between vascular dysfunction and hypertension. While the significances of vascular function tests to predict future cardiovascular events has been established in cases of hypertension, their usefulness in assessing the effectiveness of management of the vascular functions in hypertension on the cardiovascular outcomes has not yet been fully clarified. Thus, vascular dysfunction plays crucial roles in the pathophysiology of hypertension, and further research is warranted to establish strategies to improve vascular dysfunction in cases of hypertension. Vascular functions in the pathophysiology of hypertension. Vascular dysfunction and elevation of blood pressure are components of a vicious cycle even from their early stages, which including abnormal blood pressure variabilities. This vicious cycle is associated with hypertensive organ damage and also adverse cardiovascular outcomes. Strategies to break this vicious cycle have not yet been fully established.

Quantitative physical examination indicators to detect patients with stenosis at a high risk of thrombosis at hemodialysis vascular access sites: A retrospective case-control study

BACKGROUND

Quantitative physical examination (PE) indicators, including palpable pulsatility length and outflow scores, can be used to quantify stenosis severity at hemodialysis vascular access sites. It is known that the risk of high-shear-related thrombosis is increased when the minimal luminal diameter (MLD) of stenosis decreases. At present, MLD is measured using sonography or angiography. This study sought to determine the relationship between quantitative PE indicators and MLD and report their diagnostic performance in detecting patients with stenosis at a high risk of thrombosis.

METHODS

We performed a retrospective case-control study using routinely collected data. We used the post-stenosis palpable pulsatility length (sPPL) and pulse-and-thrill based outflow score to assess the severity of AVF inflow and outflow stenosis, respectively. We recorded paired quantitative PE indicators and MLD before and after angioplasty in patients enrolled over a 4-month period.

RESULTS

A total of 249 paired PE indicators and MLD measurements were obtained from 163 patients. A receiver operating characteristic curve analysis showed that an MLD cutoff value of <1.55 mm and an MLD of <1.95 mm discriminated sPPL = 0 and PESOS (physical examination significant outflow stenosis)/1- of the outflow score, respectively, from all other measurements, with the area under the curve values of 0.8922 and 0.9618, respectively. With sPPL = 0 and PESOS/1- of the outflow score as diagnostic tools to detect inflow stenosis with an MLD of ⩽1.5 mm and outflow stenosis with an MLD of ⩽1.9 mm at vascular access sites, sensitivity = 86.00% and 88.46%; specificity = 97.67% and 92.11%; positive predictive values of 97.73% and 92.00% and negative predictive values of 85.71% and 88.61%, respectively, were observed.

CONCLUSIONS

Our preliminary results showed that physical examination can potentially be a diagnostic tool in detecting patients with stenosis who are at a high risk of thrombosis at hemodialysis vascular access sites with high diagnostic accuracy.

Modeling the Mechanical Microenvironment of Coiled Cerebral Aneurysms

Successful occlusion of cerebral aneurysms using coil embolization is contingent upon stable thrombus formation, and the quality of the thrombus depends upon the biomechanical environment. The goal of this study was to investigate how coil embolization alters the mechanical micro-environment within the aneurysm dome. Inertialess particles were injected in three-dimensional, computational simulations of flow inside patient aneurysms using patient-specific boundary conditions. Coil embolization was simulated as a homogenous porous medium of known permeability and inertial constant. Lagrangian particle tracking was used to calculate the residence time and shear stress history for particles in the flow before and after treatment. The percentage of particles entering the aneurysm dome correlated with the neck surface area before and after treatment (pretreatment: R2 = 0.831, P < 0.001; post-treatment: R2 = 0.638, P < 0.001). There was an inverse relationship between the change in particles entering the dome and coil packing density (R2 = 0.600, P < 0.001). Following treatment, the particles with the longest residence times tended to remain within the dome even longer while accumulating lower shear stress. A significant correlation was observed between the treatment effect on residence time and the ratio of the neck surface area to porosity (R2 = 0.390, P = 0.007). The results of this study suggest that coil embolization triggers clot formation within the aneurysm dome via a low shear stress-mediated pathway. This hypothesis links independently observed findings from several benchtop and clinical studies, furthering our understanding of this treatment strategy.

Pathology of catheter-related complications: what we need to know and what should be discovered

Despite the considerable efforts made to increase the prevalence of autogenous fistula in patients on hemodialysis, tunneled cuffed catheters are still an important access modality and used in a high percentage of the hemodialysis population. However, because of the conundrum posed by tunneled cuffed catheters, patients can develop a multitude of complications, including thrombosis, infections, formation of a fibrin sheath, and central vein stenosis, resulting in increased morbidity and mortality as well as placing a heavy burden on the healthcare system. However, with an increasing number of studies now focusing on how to manage these catheter-related complications, there has been less translational research on the pathology of these complications. This review of the most recent literature provides an update on the pathological aspects of catheter-related complications, highlighting what we need to know and what is yet to be discovered. The future research strategies and innovations needed to prevent these complications are also addressed.

Hydrodynamic dissection of Stentor coeruleus in a microfluidic cross junction

Stentor coeruleus, a single-cell ciliated protozoan, is a model organism for wound healing and regeneration studies. Despite Stentor's large size (up to 2 mm in extended state), microdissection of Stentor remains challenging. In this work, we describe a hydrodynamic cell splitter, consisting of a microfluidic cross junction, capable of splitting Stentor cells in a non-contact manner at a high throughput of ∼500 cells per minute under continuous operation. Introduction of asymmetry in the flow field at the cross junction leads to asymmetric splitting of the cells to generate cell fragments as small as ∼8.5 times the original cell size. Characterization of cell fragment viability shows reduced 5-day survival as fragment size decreases and as the extent of hydrodynamic stress imposed on the fragments increases. Our results suggest that cell fragment size and composition, as well as mechanical stress, play important roles in the long-term repair of Stentor cells and warrant further investigations. Nevertheless, the hydrodynamic splitter can be useful for studying phenomena immediately after cell splitting, such as the closure of wounds in the plasma membrane which occurs on the order of 100-1000 seconds in Stentor.

Biomimetic Vasculatures by 3D-Printed Porous Molds

Despite recent advances in biofabrication, recapitulating complex architectures of cell-laden vascular constructs remains challenging. To date, biofabricated vascular models have not yet realized four fundamental attributes of native vasculatures simultaneously: freestanding, branching, multilayered, and perfusable. In this work, a microfluidics-enabled molding technique combined with coaxial bioprinting to fabricate anatomically relevant, cell-laden vascular models consisting of hydrogels is developed. By using 3D porous molds of poly(ethylene glycol) diacrylate as casting templates that gradually release calcium ions as a crosslinking agent, freestanding, and perfusable vascular constructs of complex geometries are fabricated. The bioinks can be tailored to improve the compatibility with specific vascular cells and to tune the mechanical modulus mimicking native blood vessels. Crucially, the integration of relevant vascular cells (such as smooth muscle cells and endothelial cells) in a multilayer and biomimetic configuration is highlighted. It is also demonstrated that the fabricated freestanding vessels are amenable for testing percutaneous coronary interventions (i.e., drug-eluting balloons and stents) under physiological mechanical states such as stretching and bending. Overall, a versatile fabrication technique with multifaceted possibilities of generating biomimetic vascular models that can benefit future research in mechanistic understanding of cardiovascular diseases and the development of therapeutic interventions is introduced.

Artery-to-Fistula Diameter Ratio as a Predictor of Early Re-Occlusion of Immature Right Radio-Cephalic Arteriovenous Fistula after Primary PTA

Percutaneous transluminal angioplasty (PTA) is widely performed for arteriovenous fistula (AVF) that fails to mature after initial formation. We observed that some immature AVFs re-occlude earlier than others. We sought to investigate the predictors for early post-intervention failure of immature fistulas after primary PTA. We retrospectively reviewed the records and angiographic images of patients who had immature fistulas and thereby received PTA between 2013 and 2019 at our center. We investigated the short-term post-intervention outcomes of the patients within 90 days post-PTA. Patients who had re-occlusion within the period were defined as the early failure group and the rest as the patent group. We investigated factors associated with early failure. There were 80 eligible patients with 22 brachio-cephalic (BC) and 58 radio-cephalic (RC) AVFs. The median age of the patients was 64 years [range, 38–87]. There were 51 (63%) males and 29 (36%) females. Among the 58 RC AVFs, 10 (17%) patients had early failure. Logistic regression analysis showed that a larger artery to fistula (A/F) diameter ratio was the sole independent predictor of early failure after primary PTA (odd ratio 2.29 [1.023–5.147], p value = 0.044). Although further studies on a larger scale are required to confirm the clinical significance, a larger A/F diameter ratio was a potential predictor of early re-occlusion in immature fistulas after primary PTA.

The impact of microfluidics in high-throughput drug-screening applications

Drug discovery is an expensive and lengthy process. Among the different phases, drug discovery and preclinical trials play an important role as only 5-10 of all drugs that begin preclinical tests proceed to clinical trials. Indeed, current high-throughput screening technologies are very expensive, as they are unable to dispense small liquid volumes in an accurate and quick way. Moreover, despite being simple and fast, drug screening assays are usually performed under static conditions, thus failing to recapitulate tissue-specific architecture and biomechanical cues present in vivo even in the case of 3D models. On the contrary, microfluidics might offer a more rapid and cost-effective alternative. Although considered incompatible with high-throughput systems for years, technological advancements have demonstrated how this gap is rapidly reducing. In this Review, we want to further outline the role of microfluidics in high-throughput drug screening applications by looking at the multiple strategies for cell seeding, compartmentalization, continuous flow, stimuli administration (e.g., drug gradients or shear stresses), and single-cell analyses.

A Potential In Vitro 3D Cell Model to Study Vascular Diseases by Simulating the Vascular Wall Microenvironment and Its Application

BACKGROUND

Current in vitro vascular models are too simple compared with the real vascular environment. In this research, a novel in vitro 3D vascular disease model that simulated the vascular microenvironment was introduced.

METHODS

This model was mainly established by low shear stress and co-culture of endothelial cells and smooth muscle cells. Characterization and reproduction of the pathological state of the 3D model were determined. The effect of two clinical drugs was verified in this model. The difference of drug screening between a traditional oxidative-damaged cell model and this 3D model was determined by HPLC.

RESULTS

This model presented many disease markers of vascular diseases: abnormal cellular shape, higher endothelial cell apoptotic rate and smooth muscle cell migration rate, decreased superoxide dismutase level, and increased malondialdehyde and platelet-derived growth factor level. The drugs effectively reduced the disease indices and relieved the damage caused by low shear stress. Compared to the traditional oxidative-damaged cell model, this 3D model screened different active components of Salviae Miltiorrhizae extract, and it is closer to clinical studies.

CONCLUSIONS

These results suggest that the 3D vascular disease model is a more efficient and selective in vitro study and drug screening platform for vascular diseases than previously reported in vitro vascular disease models.

Platelet Mechanobiology Inspired Microdevices: From Hematological Function Tests to Disease and Drug Screening

Platelet function tests are essential to profile platelet dysfunction and dysregulation in hemostasis and thrombosis. Clinically they provide critical guidance to the patient management and therapeutic evaluation. Recently, the biomechanical effects induced by hemodynamic and contractile forces on platelet functions attracted increasing attention. Unfortunately, the existing platelet function tests on the market do not sufficiently incorporate the topical platelet mechanobiology at play. Besides, they are often expensive and bulky systems that require large sample volumes and long processing time. To this end, numerous novel microfluidic technologies emerge to mimic vascular anatomies, incorporate hemodynamic parameters and recapitulate platelet mechanobiology. These miniaturized and cost-efficient microfluidic devices shed light on high-throughput, rapid and scalable platelet function testing, hematological disorder profiling and antiplatelet drug screening. Moreover, the existing antiplatelet drugs often have suboptimal efficacy while incurring several adverse bleeding side effects on certain individuals. Encouraged by a few microfluidic systems that are successfully commercialized and applied to clinical practices, the microfluidics that incorporate platelet mechanobiology hold great potential as handy, efficient, and inexpensive point-of-care tools for patient monitoring and therapeutic evaluation. Hereby, we first summarize the conventional and commercially available platelet function tests. Then we highlight the recent advances of platelet mechanobiology inspired microfluidic technologies. Last but not least, we discuss their future potential of microfluidics as point-of-care tools for platelet function test and antiplatelet drug screening.

Emerging Microfluidic Approaches for Platelet Mechanobiology and Interplay With Circulatory Systems

Understanding how platelets can sense and respond to hemodynamic forces in disturbed blood flow and complexed vasculature is crucial to the development of more effective and safer antithrombotic therapeutics. By incorporating diverse structural and functional designs, microfluidic technologies have emerged to mimic microvascular anatomies and hemodynamic microenvironments, which open the floodgates for fascinating platelet mechanobiology investigations. The latest endothelialized microfluidics can even recapitulate the crosstalk between platelets and the circulatory system, including the vessel walls and plasma proteins such as von Willebrand factor. Hereby, we highlight these exciting microfluidic applications to platelet mechanobiology and platelet–circulatory system interplay as implicated in thrombosis. Last but not least, we discuss the need for microfluidic standardization and summarize the commercially available microfluidic platforms for researchers to obtain reproducible and consistent results in the field.

Modular 3D In Vitro Artery-Mimicking Multichannel System for Recapitulating Vascular Stenosis and Inflammation

Inflammation and the immune response in atherosclerosis are complex processes involving local hemodynamics, the interaction of dysfunctional cells, and various pathological environments. Here, a modular multichannel system that mimics the human artery to demonstrate stenosis and inflammation and to study physical and chemical effects on biomimetic artery models is presented. Smooth muscle cells and endothelial cells were cocultured in the wrinkled surface in vivo-like circular channels to recapitulate the artery. An artery-mimicking multichannel module comprised four channels for the fabrication of coculture models and assigned various conditions for analysis to each model simultaneously. The manipulation became reproducible and stable through modularization, and each module could be replaced according to analytical purposes. A chamber module for culture was replaced with a microfluidic concentration gradient generator (CGG) module to achieve the cellular state of inflamed lesions by providing tumor necrosis factor (TNF)-α, in addition to the stenosis structure by tuning the channel geometry. Different TNF-α doses were administered in each channel by the CGG module to create functional inflammation models under various conditions. Through the tunable channel geometry and the microfluidic interfacing, this system has the potential to be used for further comprehensive research on vascular diseases such as atherosclerosis and thrombosis.

gC1qR Antibody Can Modulate Endothelial Cell Permeability in Angioedema

Angioedema is characterized by swelling of the skin or mucous membranes. Overproduction of the vasodilator bradykinin (BK) is an important contributor to the disease pathology, which causes rapid increase in vascular permeability. BK formation on endothelial cells results from high molecular weight kininogen (HK) interacting with gC1qR, the receptor for the globular heads of C1q, the first component of the classical pathway of complement. Endothelial cells are sensitive to blood-flow-induced shear stress and it has been shown that shear stress can modulate gC1qR expression. This study aimed to determine the following: (1) how BK or angioedema patients' (HAE) plasma affected endothelial cell permeability and gC1qR expression under shear stress, and (2) if monoclonal antibody (mAb) 74.5.2, which recognizes the HK binding site on gC1qR, had an inhibitory effect in HK binding to endothelial cells. Human dermal microvascular endothelial cells (HDMECs) grown on Transwell inserts were exposed to shear stress in the presence of HAE patients' plasma. Endothelial cell permeability was measured using FITC-conjugated bovine serum albumin. gC1qR expression and HK binding to endothelial cell surface was measured using solid-phase ELISA. Cell morphology was quantified using immunofluorescence microscopy. The results demonstrated that BK at 1 µg/mL, but not HAE patients' plasma and/or shear stress, caused significant increases in HDMEC permeability. The mAb 74.5.2 could effectively inhibit HK binding to recombinant gC1qR, and reduce HAE patients' plasma-induced HDMEC permeability change. These results suggested that monoclonal antibody to gC1qR, i.e., 74.5.2, could be potentially used as an effective therapeutic reagent to prevent angioedema.

The effects of plaque morphological characteristics on the post-stenotic flow in left main coronary artery bifurcation

Local post-stenotic hemodynamics has critical influence in the atherosclerotic plaque progression occurring in susceptible arterial sites, in particular the left main coronary artery (LMCA) bifurcation. Understanding the effects of plaque morphological characteristics: stenosis severity (SS), eccentricity index (EI) and lesion length (LL) on the post-stenotic flow behavior can significantly improve treatment planning. In order to investigate these effects, we have employed computational fluid dynamics (CFD) simulations in twenty computer-generated and five patient-specific LMCA models and the hemodynamic parameters: velocity, pressure (P), wall pressure gradient (WPG), wall shear stress (WSS), time averaged wall shear stress (TAWSS), oscillatory shear index (OSI), relative residence time (RRT) and helicity intensity (h₂) were analyzed. Our results revealed that the effect of stenosis eccentricity varied significantly for different values of stenosis severity and lesion length. Regions with low WSS, low TAWSS and high RRT were more prominent in models having higher stenosis severity. For smaller lesion length, at low and moderate stenosis severity, surface area with low TAWSS and high RRT decreased with increasing eccentricity index, whereas for high stenosis severity models, low TAWSS region and average RRT values increased with eccentricity. However, for models with longer lesion length, regions with high OSI and RRT overall increased gradually with eccentricity. The helicity intensity (h₂) of all models remained very low except at the most eccentric model with longer lesion length. The presence of very high helical flow in this model suggests the possibility of atheroprotective flow. It can be concluded that all plaque morphological characteristics covered under this investigation play an important role in plaque progression.

Shear Stress Accumulation Enhances von Willebrand Factor-Induced Platelet P-Selectin Translocation in a PI3K/Akt Pathway-Dependent Manner

Platelet adhesion and activation through the interaction of von Willebrand factor (VWF) with platelet glycoprotein (GP) Ibα are the early key events in hemostasis and thrombosis especially under high blood shear stress. P-selectin translocation from α granule to the cell surface is a typical platelet function phenotype, which makes the platelet-induced inflammatory response of flowing leukocytes possible and can be induced by either chemical agonists (thrombin, ADP, etc.) or high blood shear stress, but regulations of VWF mutation and blood shear stress on VWF-induced P-selectin translocation remain unclear. With flow cytometry, parallel plate flow chamber, and immunofluorescence staining techniques, we examined the P-selectin translocation of platelets on immobilized wild-type (WT) VWF-A1 domain and its two mutants, the gain-of-function (GOF) mutant R1308L and the loss-of-function (LOF) mutant G1324S, respectively. The results showed that the VWF-A1-induced platelet P-selectin translocation was triggered, accelerated, and enhanced by fluid shear stress and could be correlated with shear stress accumulation (SSA, the product of fluid shear stress and mechanical stimulus time), and the PI3K/Akt axis was involved in the platelet P-selectin translocation. The force-triggered P-selectin translocation occurred quickly on partial platelet surface first and then extended gradually to the whole platelet surface as SSA increased. The P-selectin translocation process would be promoted by the GOF mutation (R1308L) but slowed down by the LOF mutation (G1324S). These findings demonstrated a force-enhanced regulation mechanism for the VWF-induced platelet P-selectin translocation through the PI3K/Akt pathway and provided a novel insight into the mechano-chemical regulation mechanism for the key events, such as platelet activation and functional phenotype change in hemostasis and thrombosis.

Platelet adhesion potential estimation in a normal and diseased coronary artery model: effects of shear stress magnitude versus shear stress history

Platelets play a salient role in the pathogenesis of coronary diseases; primarily through their adhesion to other platelets, endothelial cells and plasma proteins. It is necessary for platelets to activate in order for them to adhere to these different substrates. One of the key regulatory mechanical factors in platelet activation is shear stress, which has been shown to alter multiple platelet functions through the activation of mechanoreceptors. Our goal was to investigate how different numerical shear stress tracking techniques affect platelet adhesion estimates within physiologically relevant computational models. Previously, we developed a physiological coronary artery computational fluid dynamics model. Shear stress waveforms, obtained from these models, were used to monitor in vitro platelet and endothelial cell adhesion marker expression. In this work, the adhesion marker expression data was regressed to obtain numerical functions for receptor expression predictions. These functions were input into a customized adhesion model utilizing different shear stress tracking techniques. For the normal vascular conditions and minimal pathological disease models, shear stress tracking did not significantly affect the adhesion estimates. However, for the severe pathological model, the two shear stress tracking methods had vastly different estimates. Therefore, shear stress tracking methods must be chosen accurately to predict platelet adhesion potentials for accurate modeling techniques.

Flow Dynamics and Mixing in Extracorporeal Support: A Study of the Return Cannula

Cannulation strategies in medical treatment such as in extracorporeal life support along with the associated cannula position, orientation and design, affects the mixing and the mechanical shear stress appearing in the flow field. This in turn influences platelet activation state and blood cell destruction. In this study, a co-flowing confined jet similar to a return cannula flow configuration found in extracorporeal membrane oxygenation was investigated experimentally. Cannula diameters, flow rate ratios between the jet and the co-flow and cannula position were studied using Particle Image Velocimetry and Planar Laser Induced Fluorescence. The jet was turbulent for all but two cases, in which a transitional regime was observed. The mixing, governed by flow entrainment, shear layer induced vortices and a backflow along the vessel wall, was found to require 9–12 cannula diameters to reach a fully homogeneous mixture. This can be compared to the 22–30 cannula diameters needed to obtain a fully developed flow. Although not significantly affecting mixing characteristics, cannula position altered the development of the flow structures, and hence the shear stress characteristics.

The Effect of Enhanced External Counterpulsation on Platelet Aggregation in Patients with Coronary Heart Disease

BACKGROUND

Resistance to antiplatelet therapy, especially aspirin or clopidogrel, triggers other therapies for patients with coronary heart disease (CHD). Enhanced external counterpulsation (EECP) is a noninvasive, pneumatic technique that provides beneficial effects for patients with CHD. However, the physiological effects of EECP have not been fully studied, and the role of EECP on platelet function remains poorly understood.

METHODS

A total of 168 patients with CHD were finally selected from the Second Xiangya Hospital and randomly assigned to either a control group or EECP group. The control group accepted only standard medical treatment, while the EECP group accepted standard medical treatment and EECP treatment. Blood samples were collected from patients at baseline and after EECP, and platelet aggregation was assessed. Changes in platelet aggregation were compared before and after treatment.

RESULTS

There was no difference in the basal levels of arachidonic acid (AA) induced platelet maximum aggregation ratio (MAR) between the two groups. The AA-induced platelet MAR was significantly decreased after EECP therapy. The logistic analysis showed that low HDL-C was not favorable for the decrease in platelet aggregation.

CONCLUSION

EECP therapy is favorable for lowering platelet aggregation in patients with CHD, especially the AA-induced platelet aggregation ratio.

Endograft exclusion of the false lumen restores local hemodynamics in a model of type B aortic dissection

OBJECTIVE

Endovascular intervention in uncomplicated type B dissection has not been shown conclusively to confer benefit on patients. The hemodynamic effect of primary entry tear coverage is not known. Endovascular stent grafts were deployed in a model of aortic dissection with multiple fenestrations to study these effects. It is hypothesized that endograft deployment will lead to restoration of parabolic true lumen flow as well as elimination of false lumen flow and transluminal jets and vortices locally while maintaining distal false lumen canalization.

METHODS

Thoracic stent grafts were placed in silicone models of aortic dissection with a compliant and mobile intimal flap and installed in a flow loop. Pulsatile fluid flow was established with a custom positive displacement pump, and the models were imaged by four-dimensional flow magnetic resonance imaging. Full flow fields were acquired in the models, and velocities were extracted to calculate flow rates, reverse flow indices, and oscillatory shear index, the last two of which are measures of stagnant and disturbed flows.

RESULTS

Complete obliteration of the false lumen was achieved in grafted aorta, with normal parabolic flow profiles in the true lumen (maximal velocity, 30.4 ± 8.4 cm/s). A blind false lumen pouch was created distal to this with low-velocity (5.8 ± 2.7 cm/s) and highly reversed (27.9% ± 13.9% reverse flow index) flows. In distal free false lumen segments, flows were comparable to ungrafted conditions with maximal velocities on the order of 7.0 ± 2.1 cm/s. Visualization studies revealed forward flow in these regions with left-handed vortices from true to false lumen. Shear calculations in free false lumen regions demonstrated reduced oscillatory shear index.

CONCLUSIONS

Per the initial hypothesis, endovascular grafting improved true lumen hemodynamics in the grafted region. Just distally, a prothrombotic flow regimen was noted in the false lumen, yet free false lumen distal to this remained canalized. Clinically, this suggests a need for advancing endovascular intervention beyond sole entry tear coverage to prevent further false lumen canalization through uncovered fenestrations.

Hemodynamic impacts of hematocrit level by two-way coupled FSI in the left coronary bifurcation

Cardiovascular disease is now under the influence of several factors that encourage researchers to investigate the flow of these vessels. Oscillation influences the blood circulation in the volume of red blood cells (RBC) strongly. Therefore, in this study, its effects have been considered on hemodynamic parameters in the elastic wall and coronary bifurcation. In this study, a 3D geometry of non-Newtonian and pulsatile blood circulation is considered in the left coronary artery bifurcation. The Casson model with various hematocrits is analyzed in elastic and rigid walls. The wall shear stress (WSS) cannot show the stenosis artery alone, therefore, the oscillatory shear index (OSI) is represented as a hemodynamic parameter of WSS individually of time. The results are determined using two-way fluid-structure interaction (FSI) coupling method using an arbitrary Lagrangian-Eulerian method. The most prominent difference in velocity happened in the bifurcation and at hematocrit 30 with yield stress 6.59E-04 Pa. The backflow and vortex flow in the LCx branch grown with increasing shear rates. The likelihood of plaque generation at the ending of the LM branch is observed in hematocrits 10 and 20, while the WSS magnitude is normal in the hematocrit 60 with the greatest yield stress in the bifurcation. The shear stress among the rigid and elastic models is the highest at the ending of the LM branch. The wall shear stress magnitude among the models decreased at most of 24.49% by dividing the flow. Time-independent results for models showed that there is the highest value of OSI at the bifurcation, which then quickly dropped.

Quantification of the severity of outflow stenosis of hemodialysis fistulas with a pulse- and thrill-based scoring system

BACKGROUND

Hyper-pulsatility of hemodialysis arteriovenous fistula (AVF) is the basic physical examination finding when there is outflow stenosis. The arm elevation test can also be utilized to detect outflow stenosis. If there is no significant outflow stenosis, the AVF should collapse, at least partially, because of the effect of gravity when the AVF-bearing arm is elevated to a level above that of the heart. However, if there is significant outflow stenosis, the portion of the AVF downstream of the stenosis will collapse, while the portion upstream of the stenosis will remain distended (Clin J Am Soc Nephro 8:1220-7, 2013). In our daily practice, when performing the arm elevation test, we not only observe the collapsibility of the access outflow but also palpate the outflow to identify a background thrill that sometimes disappears with the arm at rest, only to reappear when the arm is elevated. If there is no thrill upon arm elevation, we assume that the outflow stenosis is severe and refer to this condition as "physical examination significant outflow stenosis" (PESOS). The aim of this study is to characterize PESOS using percentage stenosis and Doppler flow parameters.

METHODS

We performed a case-control study using data collected prospectively between June 2019 and December 2019. A pulse- and thrill-based score system was developed to assess the severity of AVF outflow stenosis. We recorded the outflow scores and Doppler measurements performed in 84 patients with mature fistulas over a 6-month period. Angiograms were reviewed to determine the severity of outflow stenosis, which was assessed by calculation of percentage stenosis.

RESULTS

Receiver operating characteristic analysis showed that a cutoff value of ≥74.44% stenosis discriminated PESOS from other AVF outflow scores, with an area under the curve of 0.9011. PESOS diagnosed cases with ≥75% outflow stenosis in an AVF, with a sensitivity of 80.39%, a specificity of 78.79%, a positive predictive value of 85.42%, and a negative predictive value of 72.22%.

CONCLUSIONS

PESOS can be used to diagnose ≥75% outflow stenosis in an AVF, with or without a significant collateral vein, and its diagnostic accuracy is high. The use of PESOS as an indicator for treatment implies that physical examination may represent a useful surveillance tool.

Platelet activation via dynamic conformational changes of von Willebrand factor under shear

Shear-induced conformational changes of von Willebrand factor (VWF) play an important role in platelet activation. A novel approach describing VWF unfolding on the platelet surface under dynamic shear stress is proposed. Cumulative effect of dynamic shear on platelet activation via conformational changes of VWF is analysed. The critical condition of shear-induced platelet activation is formulated. The explicit expression for the threshold value of cumulative shear stress as a function of VWF multimer size is derived. The results open novel prospects for pharmacological regulation of shear-induced platelet activation through control of VWF multimers size distribution.

The effect of anastomotic angle and diameter ratio on flow field in the distal end-to-side anastomosis

Flow fields in the distal end-to-side anastomosis of coronary artery bypass graft are associated with intimal hyperplasia and bypass failure. This work aims to demonstrate the effect of anastomotic angle and diameter ratio on flow field of coronary artery bypass graft. The flow fields inside polydimethylsiloxane models of coronary artery bypass graft with various anastomotic angles (α = 30°, 45°, 60° and 75°) and different diameter ratios (Φ = 0.78 and 1.11) are investigated using particle image velocimetry and computational fluid dynamics method under pulsatile flow condition. The results show that the anastomotic angle is positively correlated with the number and area of the recirculation zone, and the flow field disturbance at the anastomosis will develop in the same direction. Compared with that of Φ = 0.78, when Φ = 1.11, the flow fields at the anastomosis are relatively smoother with less turbulence.

Platelet Dynamics and Hemodynamics of Cerebral Aneurysms Treated with Flow-Diverting Stents

Flow-diverting stents (FDS) are used to treat cerebral aneurysms. They promote the formation of a stable thrombus within the aneurysmal sac and, if successful, isolate the aneurysmal dome from mechanical stresses to prevent rupture. Platelet activation, a mechanism necessary for thrombus formation, is known to respond to biomechanical stimuli, particularly to the platelets' residence time and shear stress exposure. Currently, there is no reliable method for predicting FDS treatment outcomes, either a priori or after the procedure. Eulerian computational fluid dynamic (CFD) studies of aneurysmal flow have searched for predictors of endovascular treatment outcome; however, the hemodynamics of thrombus formation cannot be fully understood without considering the platelets' trajectories and their mechanics-triggered activation. Lagrangian analysis of the fluid mechanics in the aneurysmal vasculature provides novel metrics by tracking the platelets' residence time (RT) and shear history (SH). Eulerian and Lagrangian parameters are compared for 19 patient-specific cases, both pre- and post-treatment, to assess the degree of change caused by the FDS and subsequent treatment efficacy.

Endothelial Cell Biomechanical Responses are Dependent on Both Fluid Shear Stress and Tensile Strain

Introduction

The goal of this study was to investigate how concurrent shear stress and tensile strain affect endothelial cell biomechanical responses.

Methods

Human coronary artery endothelial cells were exposed to concurrent pulsatile shear stress and cyclic tensile strain in a programmable shearing and stretching device. Three shear stress-tensile strain conditions were used: (1) pulsatile shear stress at 1 Pa and cyclic tensile strain at 7%, simulating normal stress/strain conditions in a healthy coronary artery; (2) shear stress at 3.7 Pa and tensile strain at 3%, simulating pathological stress/strain conditions near a stenosis; (3) shear stress at 0.7 Pa and tensile strain at 5%, simulating pathological stress/strain conditions in a recirculation zone. Cell morphology was quantified using immunofluorescence microscopy. Cell surface PECAM-1 phosphorylation, ICAM-1 expression, ERK1/2 and NF-κB activation were measured using ELISA or Western blot.

Results

Simultaneous stimulation from pulsatile shear stress and cyclic tensile strain induced a significant increase in cell area, compared to that induced by shear stress or tensile strain alone. The combined stimulation caused significant increases in PECAM-1 phosphorylation. The combined stimulation also significantly enhanced EC surface ICAM-1 expression (compared to that under shear stress alone) and transcriptional factor NF-κB activation (compared to that under control conditions).

Conclusion

Pulsatile shear stress and cyclic tensile strain could induce increased but not synergistic effect on endothelial cell morphology or activation. The combined mechanical stimulation can be relayed from cell membrane to nucleus. Therefore, to better understand how mechanical conditions affect endothelial cell mechanotransduction and cardiovascular disease development, both shear stress and tensile strain need to be considered.

Clinical findings, synovial fluid cytology and growth factor concentrations after intra-articular use of a platelet-rich product in horses with osteoarthritis

Osteoarthritis is a common cause of lameness in horses, resulting in poor performance. Intra-articular platelet-rich plasma can deliver a collection of bioactive molecules, such as autologous growth factors and proteins involved in the quality of tissue repair. Horses (n=5) with osteoarthritis affecting antebrachiocarpal, middle carpal or metacarpophalangeal joints, and horses (n=5) without osteoarthritis of the corresponding joints (radiographically free of osteoarthritis), were used for the production of platelet-rich plasma which was subsequently injected into selected joints. Clinical and synovial fluid changes after intra-articular injection of platelet-rich plasma as well as synovial platelet-derived growth factor-BB and transforming growth factor-beta 1 concentration changes were evaluated in these joints and compared between normal joints and joints with osteoarthritis. A gravity filtration system produced a moderately concentrated platelet-rich plasma, representing a 4.7-fold increase in baseline platelet concentration. The synovial effusion score was significantly different between the control joints and joints with osteoarthritis on Day 0 with a higher score in the group with osteoarthritis. Within the control group, the synovial effusion score was significantly higher on Days 1 and 2 compared to Day 0. For both groups, the synovial fluid nucleated cell count, predominantly intact neutrophils, was significantly increased on Days 1 and 2, with no significant difference between groups. The mean synovial platelet-derived growth factor-BB and transforming growth factor-beta 1 concentrations were increased for both groups but significantly lowered in the group with osteoarthritis on Day 1 compared to normal joints. Concentrations for platelet-derived growth factor-BB remained unchanged on Day 5, compared to Day 1, with no significant difference between groups. In conclusion, intra-articular treatment with platelet-rich plasma resulted in increased synovial growth factor concentrations in joints but with lower concentrations in joints with osteoarthritis. A transient inflammatory reaction was seen both clinically as an increase in synovial effusion and cytologically in both normal joints and joints with osteoarthritis.

Online Analysis of Drug Toxicity to Cells with Shear Stress on an Integrated Microfluidic Chip

Mechanical stimulation, especially fluid shear stress (FSS), is essential for a cell to regulate regular behaviors. A high-throughput platform to provide varying FSS for cell research is desperately required for better mimicking of the complex fluidic microenvironment. This work reports an integrated microfluidic chip that could afford five different FSS gradients consistently to investigate drug toxicity on cells with the stimulation of FSS. Compared with traditional methods to provide FSS, this device would be easier to operate, have higher throughput, and could eliminate interference factors from the culture environment for cells (apart from the unique variable FSS). On such a multi-FSS platform, effects of drugs toxicity on cells were exhibited, which would be more intense than that under static conditions. The results indicated that FSS enhanced the drug toxicity. The designed biochip provides an easy and high-throughput platform to evaluate the toxicity of drugs in the more authentic microenvironment and could be promisingly applied in future drug screening tests.

Engineering in-vitro stem cell-based vascularized bone models for drug screening and predictive toxicology

The production of veritable in-vitro models of bone tissue is essential to understand the biology of bone and its surrounding environment, to analyze the pathogenesis of bone diseases (e.g., osteoporosis, osteoarthritis, osteomyelitis, etc.), to develop effective therapeutic drug screening, and to test potential therapeutic strategies. Dysregulated interactions between vasculature and bone cells are often related to the aforementioned pathologies, underscoring the need for a bone model that contains engineered vasculature. Due to ethical restraints and limited prediction power of animal models, human stem cell-based tissue engineering has gained increasing relevance as a candidate approach to overcome the limitations of animals and to serve as preclinical models for drug testing. Since bone is a highly vascularized tissue, the concomitant development of vasculature and mineralized matrix requires a synergistic interaction between osteogenic and endothelial precursors. A number of experimental approaches have been used to achieve this goal, such as the combination of angiogenic factors and three-dimensional scaffolds, prevascularization strategies, and coculture systems. In this review, we present an overview of the current models and approaches to generate in-vitro stem cell-based vascularized bone, with emphasis on the main challenges of vasculature engineering. These challenges are related to the choice of biomaterials, scaffold fabrication techniques, and cells, as well as the type of culturing conditions required, and specifically the application of dynamic culture systems using bioreactors.

Platelets modulate endothelial cell response to dynamic shear stress through PECAM-1

INTRODUCTION

Both vascular endothelial cells and platelets are sensitive to blood flow induced shear stress. We have recently reported that platelet-endothelial cell interaction could greatly affect platelet activation under flow. In the present study, we aimed to investigate how platelet-endothelial cell interaction affected endothelial cell inflammatory responses under flow.

MATERIALS AND METHODS

Human coronary artery endothelial cells were exposed to normal or low pulsatile shear stress with or without the presence of platelets. Following shear exposure, endothelial cell ICAM-1 expression was measured using ELISA, Western blot and PCR; cell surface PECAM-1 expression/phosphorylation was measured using ELISA. Platelet adhesion to endothelial cells was quantified using immunofluorescence microscopy. To determine the role of PECAM-1 in platelet-endothelial cell interaction, endothelial cell PECAM-1 expression was suppressed using siRNA.

RESULTS

Pathological low shear stress induced a significant increase in endothelial cell ICAM-1 expression, at both protein and mRNA levels. Platelet adhesion to endothelial cells increased significantly under low shear stress, co-localizing with PECAM-1 at endothelial cell junctions. The presence of platelets inhibited low shear stress-induced ICAM-1 upregulation. When endothelial cell PECAM-1 expression was suppressed, platelet adhesion to endothelial cells under low shear stress decreased significantly; endothelial cell ICAM-1 expression was not affected by shear stress, with or without platelets.

CONCLUSIONS

These results suggested that PECAM-1 could mediate platelet adhesion to endothelial cells under shear stress. Platelets binding to endothelial cells interfered with endothelial cell mechanotransduction through PECAM-1, affecting endothelial cell inflammatory responses towards pathological shear flow.

A Shearing-Stretching Device That Can Apply Physiological Fluid Shear Stress and Cyclic Stretch Concurrently to Endothelial Cells

Endothelial cell (EC) morphology and functions can be highly impacted by the mechanical stresses that the cells experience in vivo. In most areas in the vasculature, ECs are continuously exposed to unsteady blood flow-induced shear stress and vasodilation-contraction-induced tensile stress/strain simultaneously. Investigations on how ECs respond to combined shear stress and tensile strain will help us to better understand how an altered mechanical environment affects EC mechanotransduction, dysfunction, and associated cardiovascular disease development. In the present study, a programmable shearing and stretching device that can apply dynamic fluid shear stress and cyclic tensile strain simultaneously to cultured ECs was developed. Flow and stress/strain conditions in the device were simulated using a fluid structure interaction (FSI) model. To characterize the performance of this device and the effect of combined shear stress-tensile strain on EC morphology, human coronary artery ECs (HCAECs) were exposed to concurrent shear stress and cyclic tensile strain in the device. Changes in EC morphology were evaluated through cell elongation, cell alignment, and cell junctional actin accumulation. Results obtained from the numerical simulation indicated that in the "in-plane" area of the device, both fluid shear stress and biaxial tensile strain were uniform. Results obtained from the in vitro experiments demonstrated that shear stress, alone or combined with cyclic tensile strain, induced significant cell elongation. While biaxial tensile strain alone did not induce any appreciable change in EC elongation. Fluid shear stress and cyclic tensile strain had different effects on EC actin filament alignment and accumulation. By combining various fluid shear stress and cyclic tensile strain conditions, this device can provide a physiologically relevant mechanical environment to study EC responses to physiological and pathological mechanical stimulation.

Experimental Approaches to Study Endothelial Responses to Shear Stress

SIGNIFICANCE

Shear stress controls multiple physiological processes in endothelial cells (ECs).

RECENT ADVANCES

The response of ECs to shear has been studied using a range of in vitro and in vivo models.

CRITICAL ISSUES

This article describes some of the experimental techniques that can be used to study endothelial responses to shear stress. It includes an appraisal of large animal, rodent, and zebrafish models of vascular mechanoresponsiveness. It also describes several bioreactors to apply flow to cells and physical methods to separate mechanoresponses from mass transport mechanisms.

FUTURE DIRECTIONS

We conclude that combining in vitro and in vivo approaches can provide a detailed mechanistic view of vascular responses to force and that high-throughput systems are required for unbiased assessment of the function of shear-induced molecules. Antioxid. Redox Signal. 25, 389-400.

Selective induction of anti-inflammatory monocyte-platelet aggregates in a model of pulsatile blood flow at low shear rates

In patients with cardiovascular abnormalities or immunological disorders, an increased number of circulating leukocyte-platelet aggregates is observed. Leukocyte-platelet aggregates play an essential role in linking the hemostatic and immune systems. High shear stress and pro-coagulant and pro-inflammatory stimulants are known to activate platelets and promote the formation of aggregates. Pulsatile blood flow under low shear stress can also induce platelet activation in comparatively mild conditions. However, the effect of such events on leukocyte-platelet aggregates has not yet been investigated. To determine whether low shear stress affects the formation of aggregates, we established a simple "inverting rotation" method of inducing periodic changes in the direction of blood flow in combination with low shear stress. We demonstrated that after the inverting rotation treatment for 10-20 min more than 70% of monocytes selectively aggregated with platelets. The formation of monocyte-platelet complexes was inhibited by an anti-CD162 (PSGL-1) monoclonal antibody or a Ca(2+) chelator. The phagocytic activity of monocytes was augmented by inverting rotation, whereas phagocytosis mediated by granulocytes remained unaffected. Interestingly, the formation of monocyte-platelet complexes suppressed the production of pro-inflammatory cytokines such as interleukin (IL)-1β. At the same time, monocyte-platelet complexes augmented the expression of the anti-inflammatory cytokine IL-10. Our results suggest that platelet-bound monocytes show an anti-inflammatory phenotype under low shear stress conditions. Thus, our method provided new insights into the mechanisms of monocyte-platelet aggregate formation and regulation.

Interaction between drug delivery vehicles and cells under the effect of shear stress

Over the last decades, researchers have developed an ever greater and more ingenious variety of drug delivery vehicles (DDVs). This has made it possible to encapsulate a wide selection of therapeutic agents, ranging from proteins, enzymes, and peptides to hydrophilic and hydrophobic small drugs while, at the same time, allowing for drug release to be triggered through a diverse range of physical and chemical cues. While these advances are impressive, the field has been lacking behind in translating these systems into the clinic, mainly due to low predictability of in vitro and rodent in vivo models. An important factor within the complex and dynamic human in vivo environment is the shear flow observed within our circulatory system and many other tissues. Within this review, recent advances to leverage microfluidic devices to better mimic these conditions through novel in vitro assays are summarized. By grouping the discussion in three prominent classes of DDVs (lipidic and polymeric particles as well as inorganic nanoparticles), we hope to guide researchers within drug delivery into this exciting field and advance a further implementation of these assay systems within the development of DDVs.

Computational analysis of fluid flow within a device for applying biaxial strain to cultured cells

In vitro systems for applying mechanical strain to cultured cells are commonly used to investigate cellular mechanotransduction pathways in a variety of cell types. These systems often apply mechanical forces to a flexible membrane on which cells are cultured. A consequence of the motion of the membrane in these systems is the generation of flow and the unintended application of shear stress to the cells. We recently described a flexible system for applying mechanical strain to cultured cells, which uses a linear motor to drive a piston array to create biaxial strain within multiwell culture plates. To better understand the fluidic stresses generated by this system and other systems of this type, we created a computational fluid dynamics model to simulate the flow during the mechanical loading cycle. Alterations in the frequency or maximal strain magnitude led to a linear increase in the average fluid velocity within the well and a nonlinear increase in the shear stress at the culture surface over the ranges tested (0.5-2.0 Hz and 1-10% maximal strain). For all cases, the applied shear stresses were relatively low and on the order of millipascal with a dynamic waveform having a primary and secondary peak in the shear stress over a single mechanical strain cycle. These findings should be considered when interpreting experimental results using these devices, particularly in the case when the cell type used is sensitive to low magnitude, oscillatory shear stresses.

Simulations reveal adverse hemodynamics in patients with multiple systemic to pulmonary shunts

For newborns diagnosed with pulmonary atresia or severe pulmonary stenosis leading to insufficient pulmonary blood flow, cyanosis can be mitigated with placement of a modified Blalock-Taussig shunt (MBTS) between the innominate and pulmonary arteries. In some clinical scenarios, patients receive two systemic-to-pulmonary connections, either by leaving the patent ductus arteriosus (PDA) open or by adding an additional central shunt (CS) in conjunction with the MBTS. This practice has been motivated by the thinking that an additional source of pulmonary blood flow could beneficially increase pulmonary flow and provide the security of an alternate pathway in case of thrombosis. However, there have been clinical reports of premature shunt occlusion when more than one shunt is employed, leading to speculation that multiple shunts may in fact lead to unfavorable hemodynamics and increased mortality. In this study, we hypothesize that multiple shunts may lead to undesirable flow competition, resulting in increased residence time (RT) and elevated risk of thrombosis, as well as pulmonary overcirculation. Computational fluid dynamics-based multiscale simulations were performed to compare a range of shunt configurations and systematically quantify flow competition, pulmonary circulation, and other clinically relevant parameters. In total, 23 cases were evaluated by systematically changing the PDA/CS diameter, pulmonary vascular resistance (PVR), and MBTS position and compared by quantifying oxygen delivery (OD) to the systemic and coronary beds, wall shear stress (WSS), oscillatory shear index (OSI), WSS gradient (WSSG), and RT in the pulmonary artery (PA), and MBTS. Results showed that smaller PDA/CS diameters can lead to flow conditions consistent with increased thrombus formation due to flow competition in the PA, and larger PDA/CS diameters can lead to insufficient OD due to pulmonary hyperfusion. In the worst case scenario, it was found that multiple shunts can lead to a 160% increase in RT and a 10% decrease in OD. Based on the simulation results presented in this study, clinical outcomes for patients receiving multiple shunts should be critically investigated, as this practice appears to provide no benefit in terms of OD and may actually increase thrombotic risk.

How do we prevent the vulnerable atherosclerotic plaque from rupturing? Insights from in vivo assessments of plaque, vascular remodeling, and local endothelial shear stress

Coronary atherosclerosis progresses both as slow, gradual enlargement of focal plaque and also as a more dynamic process with periodic abrupt changes in plaque geometry, size, and morphology. Systemic vasculoprotective therapies such as statins, angiotensin-converting enzyme inhibitors, and antiplatelet agents are the cornerstone of prevention of plaque rupture and new adverse clinical outcomes, but such systemic therapies are insufficient to prevent the majority of new cardiac events. Invasive imaging methods have been able to identify both the anatomic features of high-risk plaque and the ongoing pathobiological stimuli responsible for progressive plaque inflammation and instability and may provide sufficient information to formulate preventive local mechanical strategies (eg, preemptive percutaneous coronary interventions) to avert cardiac events. Local endothelial shear stress (ESS) triggers vascular phenomena that synergistically exacerbate atherosclerosis toward an unstable phenotype. Specifically, low ESS augments lipid uptake and catabolism, induces plaque inflammation and oxidation, downregulates the production, upregulates the degradation of extracellular matrix, and increases cellular apoptosis ultimately leading to thin-cap fibroatheromas and/or endothelial erosions. Increases in blood thrombogenicity that result from either high or low ESS also contribute to plaque destabilization. An understanding of the actively evolving vascular phenomena, as well as the development of in vivo imaging methodologies to identify the presence and severity of the different processes, may enable early identification of a coronary plaque destined to acquire a high-risk state and allow for highly selective, focal preventive interventions to avert the adverse natural history of that particular plaque. In this review, we focus on the role of ESS in the pathobiologic processes responsible for plaque destabilization, leading either to accelerated plaque growth or to acute coronary events, and emphasize the potential to utilize in vivo risk stratification of individual coronary plaques to optimize prevention strategies to preclude new cardiac events.

New stent surface materials: the impact of polymer-dependent interactions of human endothelial cells, smooth muscle cells, and platelets

Despite the development of new coronary stent technologies, in-stent restenosis and stent thrombosis are still clinically relevant. Interactions of blood and tissue cells with the implanted material may represent an important cause of these side effects. We hypothesize material-dependent interaction of blood and tissue cells. The aim of this study is accordingly to investigate the impact of vascular endothelial cells, smooth muscle cells and platelets with various biodegradable polymers to identify a stent coating or platform material that demonstrates excellent endothelial-cell-supportive and non-thrombogenic properties. Human umbilical venous endothelial cells, human coronary arterial endothelial cells and human coronary arterial smooth muscle cells were cultivated on the surfaces of two established biostable polymers used for drug-eluting stents, namely poly(ethylene-co-vinylacetate) (PEVA) and poly(butyl methacrylate) (PBMA). We compared these polymers to new biodegradable polyesters poly(l-lactide) (PLLA), poly(3-hydroxybutyrate) (P(3HB)), poly(4-hydroxybutyrate) (P(4HB)) and a polymeric blend of PLLA/P(4HB) in a ratio of 78/22% (w/w). Biocompatibility tests were performed under static and dynamic conditions. Measurement of cell proliferation, viability, glycocalix width, eNOS and PECAM-1 mRNA expression revealed strong material dependency among the six polymer samples investigated. Only the polymeric blend of PLLA/P(4HB) achieved excellent endothelial markers of biocompatibility. Data show that PLLA and P(4HB) tend to a more thrombotic response, whereas the polymer blend is characterized by a lower thrombotic potential. These data demonstrate material-dependent endothelialization, smooth muscle cell growth and thrombogenicity. Although polymers such as PEVA and PBMA are already commonly used for vascular implants, they did not sufficiently meet the criteria for biocompatibility. The investigated biodegradable polymeric blend PLLA/P(4HB) evidently represents a promising material for vascular stents and stent coatings.

Blood flow in hemodialysis catheters: a numerical simulation and microscopic analysis of in vivo-formed fibrin

Although catheters with side holes allow high flow rate during hemodialysis, they also induce flow disturbances and create a critical hemodynamic environment that can favor fibrin deposition and thrombus formation. This study compared the blood flow and analyzed the influence of shear stress and shear rate in fibrin deposition and thrombus formation in nontunneled hemodialysis catheters with unobstructed side holes (unobstructed device) or with some side holes obstructed by blood thrombi (obstructed device). Computational fluid dynamics (CFD) was performed to simulate realistic blood flow under laminar and turbulent conditions. The results from the numerical simulations were compared with the fibrin distribution and thrombus architecture data obtained from scanning electron microscopy (SEM) and two photons laser scanning microscopy (TPLSM) on human thrombus formed in catheters removed from patients. CFD showed that regions of flow eddies and separation were mainly found in the venous holes region. TPLSM characterization of thrombi and fibrin structure in patient samples showed fibrin formations in accordance with simulated flux dynamics. Under laminar flow conditions, the wall shear stress close to border holes increased from 87.3±0.2 Pa in the unobstructed device to 176.2±0.5 Pa in the obstructed one. Under turbulent flow conditions, the shear stress increased by 47% when comparing the obstructed to the unobstructed catheter. The shear rates were generally higher than 5000/s and therefore sufficient to induce fibrin deposition. This findings were supported by SEM data documenting a preferential fibrin arrangement on side hole walls.