Microfabricated devices in microbial bioenergy sciences

Moisture-Enabled Germination of Heat-Activated Bacillus Endospores for Rapid and Practical Bioelectricity Generation: Toward Portable, Storable Bacteria-Powered Biobatteries

Small-scale battery-like microbial fuel cells (MFCs) are a promising alternative power source for future low-power electronics. Controllable microbial electrocatalytic activity in a miniaturized MFC with unlimited biodegradable energy resources would enable simple power generation in various environmental settings. However, the short shelf-life of living biocatalysts, few ways to activate the stored biocatalysts, and extremely low electrocatalytic capabilities render the miniature MFCs unsuitable for practical use. Here, heat-activated Bacillus subtilis spores are revolutionarily used as a dormant biocatalyst that can survive storage and rapidly germinate when exposed to special nutrients that are preloaded in the device. A microporous, graphene hydrogel allows the adsorption of moisture from the air, moves the nutrients to the spores, and triggers their germination for power generation. In particular, forming a CuO-hydrogel anode and an Ag₂ O-hydrogel cathode promotes superior electrocatalytic activities leading to an exceptionally high electrical performance in the MFC. The battery-type MFC device is readily activated by moisture harvesting, producing a maximum power density of 0.4 mW cm^-2 and a maximum current density of 2.2 mA cm^-2 . The MFC configuration is readily stackable in series and a three-MFC pack produces enough power for several low-power applications, demonstrating its practical feasibility as a sole power source.

An automated system for interrogating the evolution of microbial endosymbiosis

Inter-kingdom endosymbiotic interactions between bacteria and eukaryotic cells are critical to human health and disease. However, the molecular mechanisms that drive the emergence of endosymbiosis remain obscure. Here, we describe the development of a microfluidic system, named SEER (S̲ystem for the E̲volution of E̲ndosymbiotic R̲elationships), that automates the evolutionary selection of bacteria with enhanced intracellular survival and persistence within host cells, hallmarks of endosymbiosis. Using this system, we show that a laboratory strain of Escherichia coli that initially possessed limited abilities to survive within host cells, when subjected to SEER selection, rapidly evolved to display a 55-fold enhancement in intracellular survival. Notably, molecular dissection of the evolved strains revealed that a single-point mutation in a flexible loop of CpxR, a gene regulator that controls bacterial stress responses, substantially contributed to this intracellular survival. Taken together, these results establish SEER as the first microfluidic system for investigating the evolution of endosymbiosis, show the importance of CpxR in endosymbiosis, and set the stage for evolving bespoke inter-kingdom endosymbiotic systems with novel or emergent properties.

Electrogenic Bacteria Promise New Opportunities for Powering, Sensing, and Synthesizing

Considerable research efforts into the promises of electrogenic bacteria and the commercial opportunities they present are attempting to identify potential feasible applications. Metabolic electrons from the bacteria enable electricity generation sufficient to power portable or small-scale applications, while the quantifiable electric signal in a miniaturized device platform can be sensitive enough to monitor and respond to changes in environmental conditions. Nanomaterials produced by the electrogenic bacteria can offer an innovative bottom-up biosynthetic approach to synergize bacterial electron transfer and create an effective coupling at the cell-electrode interface. Furthermore, electrogenic bacteria can revolutionize the field of bioelectronics by effectively interfacing electronics with microbes through extracellular electron transfer. Here, these new directions for the electrogenic bacteria and their recent integration with micro- and nanosystems are comprehensively discussed with specific attention toward distinct applications in the field of powering, sensing, and synthesizing. Furthermore, challenges of individual applications and strategies toward potential solutions are provided to offer valuable guidelines for practical implementation. Finally, the perspective and view on how the use of electrogenic bacteria can hold immeasurable promise for the development of future electronics and their applications are presented.

Microfluidic Microalgae System: A Review

Microalgae that have recently captivated interest worldwide are a great source of renewable, sustainable and economical biofuels. The extensive potential application in the renewable energy, biopharmaceutical and nutraceutical industries have made them necessary resources for green energy. Microalgae can substitute liquid fossil fuels based on cost, renewability and environmental concern. Microfluidic-based systems outperform their competitors by executing many functions, such as sorting and analysing small volumes of samples (nanolitre to picolitre) with better sensitivities. In this review, we consider the developing uses of microfluidic technology on microalgal processes such as cell sorting, cultivation, harvesting and applications in biofuels and biosensing.

Separation, Characterization, and Handling of Microalgae by Dielectrophoresis

Microalgae biotechnology has a high potential for sustainable bioproduction of diverse high-value biomolecules. Some of the main bottlenecks in cell-based bioproduction, and more specifically in microalgae-based bioproduction, are due to insufficient methods for rapid and efficient cell characterization, which contributes to having only a few industrially established microalgal species in commercial use. Dielectrophoresis-based microfluidic devices have been long established as promising tools for label-free handling, characterization, and separation of broad ranges of cells. The technique is based on differences in dielectric properties and sizes, which results in different degrees of cell movement under an applied inhomogeneous electrical field. The method has also earned interest for separating microalgae based on their intrinsic properties, since their dielectric properties may significantly change during bioproduction, in particular for lipid-producing species. Here, we provide a comprehensive review of dielectrophoresis-based microfluidic devices that are used for handling, characterization, and separation of microalgae. Additionally, we provide a perspective on related areas of research in cell-based bioproduction that can benefit from dielectrophoresis-based microdevices. This work provides key information that will be useful for microalgae researchers to decide whether dielectrophoresis and which method is most suitable for their particular application.

Digital quantification and selection of high-lipid-producing microalgae through a lateral dielectrophoresis-based microfluidic platform

Microalgae are promising alternatives to petroleum as renewable biofuel sources, however not sufficiently economically competitive yet. Here, a label-free lateral dielectrophoresis-based microfluidic sorting platform that can digitally quantify and separate microalgae into six outlets based on the degree of their intracellular lipid content is presented. In this microfluidic system, the degree of cellular lateral displacement is inversely proportional to the intracellular lipid level, which was successfully demonstrated using Chlamydomonas reinhardtii cells. Using this functionality, a quick digital quantification of sub-populations that contain different intracellular lipid level in a given population was achieved. In addition, the degree of lateral displacement of microalgae could be readily controlled by simply changing the applied DEP voltage, where the level of gating in the intracellular lipid-based sorting decision could be easily adjusted. This allowed for selecting only a very small percentage of a given population that showed the highest degree of intracellular lipid content. In addition, this approach was utilized through an iterative selection process on natural and chemically mutated microalgal populations, successfully resulting in enrichment of high-lipid-accumulating microalgae. In summary, the developed platform can be exploited to quickly quantify microalgae lipid distribution in a given population in real-time and label-free, as well as to enrich a cell population with high-lipid-producing cells, or to select high-lipid-accumulating microalgal variants from a microalgal library.

Microfluidic tools for lipid production and modification: a review

Microfluidics has great potential as an efficient tool for a large range of applications in industry. The ability of such devices to deal with an extremely small amount of fluid has additional benefits, including superlatively fast and efficient mass and heat transfer. These characteristics of microfluidics have attracted an enormous amount of interest in their use as a novel tool for lipid production and modification. In addition, lipid resources have a close relationship with energy resources, and lipids are an alternative renewable energy source. Here, recent advances in the application of microfluidics for lipid production and modification, especially in the discovery, culturing, harvesting, separating, and monitoring of lipid-producing microorganisms, will be reviewed. Other applications of microfluidics, such as the modification of lipids from microorganisms, will also be discussed. The novel microfluidic tools in this review will be useful in applications to improve lipid production and modification in the future.

Sheathless separation of microalgae from bacteria using a simple straight channel based on viscoelastic microfluidics

Microalgae cells have been recognized as a promising sustainable resource to meet worldwide growing demands for renewable energy, food, livestock feed, water, cosmetics, pharmaceuticals, and materials. In order to ensure high-efficiency and high-quality production of biomass, biofuel, or bio-based products, purification procedures prior to the storage and cultivation of the microalgae from contaminated bacteria are of great importance. The present work proposed and developed a simple, sheathless, and efficient method to separate microalgae Chlorella from bacteria Bacillus Subtilis in a straight channel using the viscoelasticity of the medium. Microalgae and bacteria migrate to different lateral positions closer to the channel centre and channel walls respectively. Fluorescent microparticles with 1 μm and 5 μm diameters were first used to mimic the behaviours of bacteria and microalgae to optimize the separating conditions. Subsequently, size-based separation in Newtonian fluid and in viscoelastic fluid in straight channels with different aspect ratios was compared and demonstrated. Under the optimal condition, the removal ratio for 1 μm microparticles and separation efficiency for 5 μm particles can reach up to 98.28% and 93.85% respectively. For bacteria and microalgae cells separation, the removal ratio for bacteria and separation efficiency for microalgae cells is 92.69% and 100% respectively. This work demonstrated the continuous and sheathless separation of microalgae from bacteria for the first time by viscoelastic microfluidics. This technique can also be applied as an efficient and user-friendly method to separate mammalian cells or other kinds of cells.

"Do It Yourself" Microbial Cultivation Techniques for Synthetic and Systems Biology: Cheap, Fun, and Flexible

With the emergence of inexpensive 3D printing technology, open-source platforms for electronic prototyping and single-board computers, "Do it Yourself" (DIY) approaches to the cultivation of microbial cultures are becoming more feasible, user-friendly, and thus wider spread. In this perspective, we survey some of these approaches, as well as add-on solutions to commercial instruments for synthetic and system biology applications. We discuss different cultivation designs, including capabilities and limitations. Our intention is to encourage the reader to consider the DIY solutions. Overall, custom cultivation devices offer controlled growth environments with in-line monitoring of, for example, optical density, fluorescence, pH, and dissolved oxygen, all at affordable prices. Moreover, they offer a great degree of flexibility for different applications and requirements and are fun to design and construct. We include several illustrative examples, such as gaining optogenetic control and adaptive laboratory evolution experiments.

Selective separation of microalgae cells using inertial microfluidics

Microalgae represent the most promising new source of biomass for the world's growing demands. However, the biomass productivity and quality is significantly decreased by the presence of bacteria or other invading microalgae species in the cultures. We therefore report a low-cost spiral-microchannel that can effectively separate and purify Tetraselmis suecica (lipid-rich microalgae) cultures from Phaeodactylum tricornutum (invasive diatom). Fluorescent polystyrene-microbeads of 6 μm and 10 μm diameters were first used as surrogate particles to optimize the microchannel design by mimicking the microalgae cell behaviour. Using the optimum flowrate, up to 95% of the P. tricornutum cells were separated from the culture without affecting the cell viability. This study shows, for the first time, the potential of inertial microfluidics to sort microalgae species with minimal size difference. Additionally, this approach can also be applied as a pre-sorting technique for water quality analysis.

Microbial electrochemical separation of CO2 for biogas upgrading

Biogas upgrading to natural gas quality has been under focus the recent years for increasing the utilization potential of biogas. Conventional methods for CO₂ removal are expensive and have environmental challenges, such as increased emissions of methane in the atmosphere with serious greenhouse impact. In this study, an innovative microbial electrochemical separation cell (MESC) was developed to in-situ separate and regenerate CO₂ via alkali and acid regeneration. The MESC was tested under different applied voltages, inlet biogas rates and electrolyte concentrations. Pure biomethane was obtained at 1.2V, inlet biogas rate of 0.088mL/h/mL reactor and NaCl concentration of 100mM at a 5-day operation. Meanwhile, the organic matter of the domestic wastewater in the anode was almost completely removed at the end. The study demonstrated a new sustainable way to simultaneously upgrade biogas and treat wastewater which can be used as proof of concept for further investigation.

Microfluidic chip for automated screening of carbon dioxide conditions for microalgal cell growth

This paper reports on a microfluidic device capable of screening carbon dioxide (CO₂) conditions for microalgal cell growth. The device mainly consists of a microfluidic cell culture (MCC) unit, a gas concentration gradient generator (CGG), and an in-line cell growth optical measurement unit. The MCC unit is structured with multiple aqueous-filled cell culture channels at the top layer, multiple CO₂ flow channels at the bottom layer, and a commercial hydrophobic gas semipermeable membrane sandwiched between the two channel layers. The CGG unit provides different CO₂ concentrations to support photosynthesis of microalgae in the culture channels. The integration of the commercial gas semipermeable membrane into the cell culture device allows rapid mass transport and uniform distribution of CO₂ inside the culture medium without using conventional agitation-assisted convection methods, because the diffusion of CO₂ from the gas flow channels to the culture channels is fast over a small length scale. In addition, automated in-line monitoring of microalgal cell growth is realized via the optical measurement unit that is able to detect changes in the light intensity transmitted through the cell culture in the culture channels. The microfluidic device also allows a simple grayscale analysis method to quantify the cell growth. The utility of the system is validated by growing Chlamydomonas reinhardtii cells under different low or very-low CO₂ levels below the nominal ambient CO₂ concentration.

High-throughput droplet microfluidics screening platform for selecting fast-growing and high lipid-producing microalgae from a mutant library

Biofuels derived from microalgal lipids have demonstrated a promising potential as future renewable bioenergy. However, the production costs for microalgae-based biofuels are not economically competitive, and one strategy to overcome this limitation is to develop better-performing microalgal strains that have faster growth and higher lipid content through genetic screening and metabolic engineering. In this work, we present a high-throughput droplet microfluidics-based screening platform capable of analyzing growth and lipid content in populations derived from single cells of a randomly mutated microalgal library to identify and sort variants that exhibit the desired traits such as higher growth rate and increased lipid content. By encapsulating single cells into water-in-oil emulsion droplets, each variant was separately cultured inside an individual droplet that functioned as an independent bioreactor. In conjunction with an on-chip fluorescent lipid staining process within droplets, microalgal growth and lipid content were characterized by measuring chlorophyll and BODIPY fluorescence intensities through an integrated optical detection system in a flow-through manner. Droplets containing cells with higher growth and lipid content were selectively retrieved and further analyzed off-chip. The growth and lipid content screening capabilities of the developed platform were successfully demonstrated by first carrying out proof-of-concept screening using known Chlamydomonas reinhardtii mutants. The platform was then utilized to screen an ethyl methanesulfonate (EMS)-mutated C. reinhardtii population, where eight potential mutants showing faster growth and higher lipid content were selected from 200,000 examined samples, demonstrating the capability of the platform as a high-throughput screening tool for microalgal biofuel development.

Raman spectroscopy compatible PDMS droplet microfluidic culture and analysis platform towards on-chip lipidomics

Lipids produced by microalgae are viewed as a potential renewable alternative to fossil fuels, however, significant improvements in productivity are required for microalgal biofuels to become economically feasible. Here we present a method that allows for the use of Raman spectroscopy with poly(dimethylsiloxane) (PDMS) droplet microfluidic devices, which not only overcomes the high Raman background of PDMS, but also achieves pairing of the high-throughput single-cell resolution advantages of droplet microfluidics with the direct, chemically specific, label-free, and non-destructive nature of Raman spectroscopy. The platform was successfully utilized for in situ characterization of microalgal lipid production over time within droplets, paving the way towards high-throughput microalgal lipidomics assays.

Multiplex microfluidic system integrating sequential operations of microalgal lipid production

The unit cost for the production of algal biofuel needs to be reduced in order to be a substitute for fossil fuel. To achieve this goal, the development of a novel system is needed for a rapid screening of numerous microalgal species to isolate superior strains with the highest lipid productivity. Here, we developed a PDMS-based multiplex microfluidic system with eight chambers and micropillar arrays to expedite multiple steps for lipid sample preparation from different microalgal strains. We could rapidly and efficiently perform sequential operations from cell culture to lipid extraction of eight different microalgal strains simultaneously on a single device without harvesting and purification steps, which are labor- and energy-intensive, by the simple injection of medium and solvent into the central inlet due to the integrated micropillar arrays connecting the chambers and central inlet. The lipid extraction efficiency using this system was comparable (94.5-102.6%) to the conventional Bligh-Dyer method. We investigated the cell growth and lipid productivity of different strains using the microfluidic device. We observed that each strain has a different lipid accumulation pattern according to stress conditions. These results demonstrate that our multiplex microfluidic approach can provide an efficient analytical tool for the rapid analysis of strain performances (e.g. cell growth and lipid productivities) and the determination of the optimal lipid induction condition for each strain.

Review of Microfluidic Photobioreactor Technology for Metabolic Engineering and Synthetic Biology of Cyanobacteria and Microalgae

One goal of metabolic engineering and synthetic biology for cyanobacteria and microalgae is to engineer strains that can optimally produce biofuels and commodity chemicals. However, the current workflow is slow and labor intensive with respect to assembly of genetic parts and characterization of production yields because of the slow growth rates of these organisms. Here, we review recent progress in the microfluidic photobioreactors and identify opportunities and unmet needs in metabolic engineering and synthetic biology. Because of the unprecedented experimental resolution down to the single cell level, long-term real-time monitoring capability, and high throughput with low cost, microfluidic photobioreactor technology will be an indispensible tool to speed up the development process, advance fundamental knowledge, and realize the full potential of metabolic engineering and synthetic biology for cyanobacteria and microalgae.

Exploring bubble oscillation and mass transfer enhancement in acoustic-assisted liquid-liquid extraction with a microfluidic device

We investigated bubble oscillation and its induced enhancement of mass transfer in a liquid-liquid extraction process with an acoustically-driven, bubble-based microfluidic device. The oscillation of individually trapped bubbles, of known sizes, in microchannels was studied at both a fixed frequency, and over a range of frequencies. Resonant frequencies were analytically identified and were found to be in agreement with the experimental observations. The acoustic streaming induced by the bubble oscillation was identified as the cause of this enhanced extraction. Experiments extracting Rhodanmine B from an aqueous phase (DI water) to an organic phase (1-octanol) were performed to determine the relationship between extraction efficiency and applied acoustic power. The enhanced efficiency in mass transport via these acoustic-energy-assisted processes was confirmed by comparisons against a pure diffusion-based process.

A high-throughput microfluidic single-cell screening platform capable of selective cell extraction

Microfluidic devices and lab-on-a-chip technologies have been extensively used in high-throughput single-cell analysis applications using their capability to precisely manipulate cells as well as their microenvironment. Although significant technological advances have been made in single-cell capture, culture, and analysis techniques, most microfluidic systems cannot selectively retrieve samples off-chip for additional examinations. Being able to retrieve target cells of interest from large arrays of single-cell culture compartments is especially critical in achieving high-throughput single-cell screening applications, such as a mutant library screening. We present a high-throughput microfluidic single-cell screening platform capable of investigating cell properties, such as growth and biomolecule production, followed by selective extraction of particular cells showing desired traits to off-chip reservoirs for sampling or further analysis. The developed platform consists of 1024 single-cell trapping/culturing sites, where opening and closing of each trap can be individually controlled with a microfluidic OR logic gate. By opening only a specific site out of the 1024 trapping sites and applying backflow, particular cells of interest could be selectively released and collected off-chip. Using a unicellular microalga Chlamydomonas reinhardtii, single-cell capture and selective cell extraction capabilities of the developed platform were successfully demonstrated. The growth profile and intracellular lipid accumulation of the cells were also analyzed inside the platform, where 6-8 hours of doubling time and on-chip stained lipid bodies were successfully identified, demonstrating the compatibility of the system for cell culture and fluorescent tagging assays.

Microscale microbial fuel cells: Advances and challenges

The next generation of sustainable energy could come from microorganisms; evidence that it can be seen with the given rise of Electromicrobiology, the study of microorganisms' electrical properties. Many recent advances in electromicrobiology stem from studying microbial fuel cells (MFCs), which are gaining acceptance as a future alternative "green" energy technology and energy-efficient wastewater treatment method. MFCs are powered by living microorganisms with clean and sustainable features; they efficiently catalyse the degradation of a broad range of organic substrates under natural conditions. There is also increasing interest in photosynthetic MFCs designed to harness Earth's most abundant and promising energy source (solar irradiation). Despite their vast potential and promise, however, MFCs and photosynthetic MFCs have not yet successfully translated into commercial applications because they demonstrate persistent performance limitations and bottlenecks associated with scaling up. Instead, microscale MFCs have received increasing attention as a unique platform for various applications such as powering small portable electronic elements in remote locations, performing fundamental studies of microorganisms, screening bacterial strains, and toxicity detection in water. Furthermore, the stacking of miniaturized MFCs has been demonstrated to offer larger power densities than a single macroscale MFC in terms of scaling up. In this overview, we discuss recent achievements in microscale MFCs as well as their potential applications. Further scientific and technological challenges are also reviewed.

Quick and simple integration of optical oxygen sensors into glass-based microfluidic devices

A novel simple and inexpensive technique for integration of optical oxygen sensors into microfluidic channels made of glass. The channels are coated with conjugated polymeric nanoparticles containing a covalently grafted oxygen indicator.

Monitoring of Microalgal Processes

Process monitoring, which can be defined as the measurement of process variables with the smallest possible delay, is combined with process models to form the basis for successful process control. Minimizing the measurement delay leads inevitably to employing online, in situ sensors where possible, preferably using noninvasive measurement methods with stable, low-cost sensors. Microalgal processes have similarities to traditional bioprocesses but also have unique monitoring requirements. In general, variables to be monitored in microalgal processes can be categorized as physical, chemical, and biological, and they are measured in gaseous, liquid, and solid (biological) phases. Physical and chemical process variables can be usually monitored online using standard industrial sensors. The monitoring of biological process variables, however, relies mostly on sensors developed and validated using laboratory-scale systems or uses offline methods because of difficulties in developing suitable online sensors. Here, we review current technologies for online, in situ monitoring of all types of process parameters of microalgal cultivations, with a focus on monitoring of biological parameters. We discuss newly introduced methods for measuring biological parameters that could be possibly adapted for routine online use, should be preferably noninvasive, and are based on approaches that have been proven in other bioprocesses. New sensor types for measuring physicochemical parameters using optical methods or ion-specific field effect transistor (ISFET) sensors are also discussed. Reviewed methods with online implementation or online potential include measurement of irradiance, biomass concentration by optical density and image analysis, cell count, chlorophyll fluorescence, growth rate, lipid concentration by infrared spectrophotometry, dielectric scattering, and nuclear magnetic resonance. Future perspectives are discussed, especially in the field of image analysis using in situ microscopy, infrared spectrophotometry, and software sensor systems.

A microfluidic photobioreactor array demonstrating high-throughput screening for microalgal oil production

Microalgae are envisioned as a future source of renewable oil. The feasibility of producing high-value biomolecules from microalgae is strongly dependent on developing strains with increased productivity and environmental tolerance, understanding algal gene regulation, and optimizing growth conditions for higher production of target molecules. We present a high-throughput microfluidic microalgal photobioreactor array capable of applying 64 different light conditions to arrays of microscale algal photobioreactors and apply this device to investigate how light conditions influence algal growth and oil production. Using the green colony-forming microalga Botryococcus braunii, the light intensity and light-dark cycle conditions were identified that induced 1.8-fold higher oil accumulation over the typically used culture conditions. Additionally, the studies revealed that the condition under which maximum oil production occurs is significantly different from that of maximum growth. This screening test was accomplished using the developed photobioreactor array at 250 times higher throughput compared to conventional flask-scale photobioreactors.

The development and application of high throughput cultivation technology in bioprocess development

This review focuses on recent progress in the technology of high throughput (HTP) cultivation and its increasing application in quality by design (QbD) -driven bioprocess development. Several practical HTP strategies aimed at shortening process development (PD) timelines from DNA to large scale processes involving commercially available HTP technology platforms, including microtiter plate (MTP) culture, micro-scale bioreactors, and in parallel fermentation systems, etc., are critically reviewed in detail. This discussion focuses upon the relative strengths and weaknesses or limitations of each of these platforms in this context. Emerging prototypes of micro-bioreactors reported recently, such as milliliter (mL) scale stirred tank bioreactors, and microfludics integrated micro-scale bioreactors, and their potential for practical application in QbD-driven HTP process development are also critically appraised. The overall aim of such technology is to rapidly gain process insights, and since the analytical technology deployed in HTP systems is critically important to the achievement of this aim, this rapidly developing area is discussed. Finally, general future trends are critically reviewed.

Porphyrin-based sensor nanoarchitectonics in diverse physical detection modes

Porphyrins and related families of molecules are important organic modules as has been reflected in the award of the Nobel Prizes in Chemistry in 1915, 1930, 1961, 1962, 1965, and 1988 for work on porphyrin-related biological functionalities. The porphyrin core can be synthetically modified by introduction of various functional groups and other elements, allowing creation of numerous types of porphyrin derivatives. This feature makes porphyrins extremely useful molecules especially in combination with their other interesting photonic, electronic and magnetic properties, which in turn is reflected in their diverse signal input-output functionalities based on interactions with other molecules and external stimuli. Therefore, porphyrins and related macrocycles play a preeminent role in sensing applications involving chromophores. In this review, we discuss recent developments in porphyrin-based sensing applications in conjunction with the new advanced concept of nanoarchitectonics, which creates functional nanostructures based on a profound understanding of mutual interactions between the individual nanostructures and their arbitrary arrangements. Following a brief explanation of the basics of porphyrin chemistry and physics, recent examples in the corresponding fields are discussed according to a classification based on physical modes of detection including optical detection (absorption/photoluminescence spectroscopy and energy and electron transfer processes), other spectral modes (circular dichroism, plasmon and nuclear magnetic resonance), electronic and electrochemical modes, and other sensing modes.

Current developments in high-throughput analysis for microalgae cellular contents

Microalgae have emerged as one of the most promising feedstocks for biofuels and bio-based chemical production. However, due to the lack of effective tools enabling rapid and high-throughput analysis of the content of microalgae biomass, the efficiency of screening and identification of microalgae with desired functional components from the natural environment is usually quite low. Moreover, the real-time monitoring of the production of target components from microalgae is also difficult. Recently, research efforts focusing on overcoming this limitation have started. In this review, the recent development of high-throughput methods for analyzing microalgae cellular contents is summarized. The future prospects and impacts of these detection methods in microalgae-related processing and industries are also addressed.