Malaxation: Influence on virgin olive oil quality. Past, present and future – An overview

Exploring the relevance of the type of horizontal separator to optimize the extraction efficacy for the Arbequina variety

The productivity of virgin olive oil depends not only on agronomic factors but also on the technological factors of the extraction process. The 'Arbequina' variety has extractability problems, which is a challenge for master millers anywhere. This work aims to evaluate the behavior of different decanters and seeks to modulate the effect of some processing parameters and their interactions with oil extraction efficiency in the case of 'Arbequina.' Fruit characteristics, processing parameters, and extractability were collected over 10 years from 38 decanters that belong to five different brands. The results have shown that fruit moisture is the most relevant factor for oil extractability, especially over 52%. Furthermore, extractability is positively correlated with malaxing temperature, addition of water, and total fat content in the fruit. However, the results show that before applying a regulation, the type of decanter must be considered. The model used in this study has allowed us to optimize the regulations for each type of decanter to reduce oil losses within the pomace, achieving an extraction efficiency within the range of 78%-91.5%. In fact, the best extraction efficiency results (91.5%) were obtained by processing at temperatures >26°C and water injection of 5%.

Combination of Dehydration and Expeller as a Novel Methodology for the Production of Olive Oil

An alternative olive oil (OO) production process has been developed based on the combination of olive dehydration, followed by extraction with an expeller press. This procedure eliminates the utilization of water and avoids the malaxation stage. Hence, no water residues are generated. In this study, the mentioned alternative methodology was compared to conventional extraction methods. High extraction yields and oil recovery were obtained with our novel procedure. On the contrary, substantial percentages of by-products were generated with conventional methodology. The quality indexes (acidity and peroxide values) of the oils obtained by the combination of dehydration and expeller (dOO) were 0.4% of oleic acid and 3 meq O2/kg of oil, respectively. Furthermore, none of the applied processes affected the resulting OO's fatty acid composition and lipid profile. Total phenolic content was up to four times higher for dOO than for other olive oils and it showed resistance to oxidation with an oxidative stability index about five times higher than that for conventional olive oils.

Co-Extraction Technique Improves Functional Capacity and Health-Related Benefits of Olive Oils: A Mini Review

Olive oil, a fundamental component of the Mediterranean diet, is recognized as a functional food due to its health-promoting composition. The concentration of phenolic compounds in olive oil is influenced by various factors such as genetics, agro-climatic conditions, and technological processes. Therefore, to ensure an ideal intake of phenolics through the diet, it is recommended to produce functional enriched olive oil that contains a high concentration of bioactive compounds. The co-extraction technique is used to create innovative and differentiated products that promote the sensory and health-related composition of oils. To enrich olive oil, various natural sources of bioactive compounds can be used, including raw materials derived from the same olive tree such as olive leaves, as well as other compounds from plants and vegetables, such as herbs and spices (garlic, lemon, hot pepper, rosemary, thyme, and oregano). The development of functional enriched olive oils can contribute to the prevention of chronic diseases and improve consumers' quality of life. This mini-review compiles and discusses relevant scientific information related to the development of enriched olive oil using the co-extraction technique and its positive effects on the health-related composition of oils.

Effect of Controlled Oxygen Supply during Crushing on Volatile and Phenol Compounds and Sensory Characteristics in Coratina and Ogliarola Virgin Olive Oils

In virgin olive oil industries, the technological choices of the production plant affect the biochemical activities that take place in the olives being processed throughout the entire process, thereby affecting the quality of the final product. The lipoxygenase pool enzymes that operated their activity during the first phases of the process need the best conditions to work, especially concerning temperature and oxygen availability. In this study, a system was equipped to supply oxygen in the crusher at a controllable concentration in an industrial olive oil mill at pilot plant scale, and four oxygen concentrations and two cultivars, Coratina and Ogliarola, were tested. The best concentration for oxygen supply was 0.2 L/min at the working capacity of 0.64 Ton/h. Further, using this addition of oxygen, it was possible to increase the compound's concentration, which is responsible for the green, fruity aroma. The effect on volatile compounds was also confirmed by the sensory analyses. However, at the same time, it was possible to maintain the concentration of phenols in a good quality olive oil while also preserving all the antioxidant properties of the product due to the presence of phenols. This study corroborates the importance of controlling oxygen supply in the first step of the process for process management and quality improvement in virgin olive oil production.

A New Laboratory Scale Olive Oil Extraction Method with Comparative Characterization of Phenolic and Fatty Acid Composition

The establishment of operation protocols for olive oil (OO) extraction at non-industrial scale is crucial for research purposes. Thus, the present study proposes a simple and cost-effective method for OO extraction at the laboratory scale (LS) level. To validate the proposed methodology, industrial OO extraction (IS) was performed in parallel, using the same cultivars ‘Galega vulgar’ (GV), ‘Cobrançosa’ (COB) and ‘Arbequina’ (ARB) collected from the same orchards, within the same period. Obtained results showed highest extractability for COB and ARB, of about 53%, while GAL showed 50%. All produced OO showed values lower than the regulated limits for the physicochemical parameters (acidity, K232, K268 and ΔK), classifying them as extra virgin OO (EVOO). Highest total phenolic content was observed for COB, with no significant differences (p-value > 0.05) between extraction methods. Regarding fatty acid composition, oleic acid (C18:1) showed the lowest percentage for ARB, with about 66% and 68%, for LS and IS, respectively, and the highest for GV with about 72% for both LS and IS. Furthermore, all samples from both extraction methods were compared to the European Community Regulation, with fatty acid composition within the regulated levels for EVOO. This work showed promising results regarding extraction yields and OO extractability, as well as its quality parameters.

Investigation of the Effectiveness of a Vertical Centrifugation System Coupled with an Inert Gas Dosing Device to Produce Extra Virgin Olive Oil

Recent decades have seen the development of many effective and innovative technologies for extra virgin olive oil (EVOO) extraction. Various solutions have been proposed to remove dissolved oxygen from the oil. Given these issues, we have designed and developed a system that can be added to the centrifuges that are already used in the olive oil industry. The system reduces the oxidative impact through the release of a technical gas inside the separator, and consequently delays the onset of defects related to oxidation. The experiment tested different N2 flow rates, directly into the vertical centrifuge, and four levels of N2 were tested–a control level (no N2 injection); low (20 L/min), medium (40 L/min), and maximum (80 L/min)–in order to evaluate the effectiveness of this new technique on EVOO quality. This experiment demonstrates that the objectives have been achieved. The EVOO produced using our system had lower dissolved oxygen content with N2 injection, along with an enriched volatile fraction, and higher biophenol concentrations. The chemical analyses were confirmed by a sensory analysis, with an increase in fruity intensity and bitter taste.

Edible oils from olive drupes as a source of bioactive pentacyclic triterpenes. Is there a prospect for a health claim authorization?

Virgin olive oil and olive-pomace oil constitute high nutritional value edible oils due to the presence of oleic acid and a variety of bioactives. Among the latter, the group of pentacyclic triterpenes (PcTr) is the least studied. This review provides an insight into the biosynthesis of PcTr in the olive fruit, mainly of oleanane-type, and the factors influencing their transfer to the oil. Particular attention is given to the extraction methods along with the liquid and gas chromatography coupled to mass spectrometry protocols used for the discrimination and determination of PcTr. The in vivo bioactive properties of PcTr through the intake of these oils against cardiovascular diseases, liver dysfunction, obesity and diabetes are presented with a prospect of a future health claim authorization. Gaps in literature are pointed out to support this goal.

Fruit pomaces-their nutrient and bioactive components, effects on growth and health of poultry species, and possible optimization techniques

The ever-growing human population, coupled with the exigent need to meet the increasing demand for poultry meat and egg, has put the onus on poultry nutritionists and farmers to identify alternative feed ingredients that could assure the least-cost feed formulation. In addition, the public desire for non-antibiotic-treated poultry products has also necessitated the ultimate search for potent antibiotic alternatives for use in poultry production. While some identified alternatives are promising, their cost implications and technical know-how requirements may discourage their ease of adoption in poultry. The use of plants and/or their by-products, like fruit pomaces, present a pocket-friendly advantage and as a result, are gaining much interest. This is traceable to their rich phytochemical profile, nutritional composition, ready availability, and relatively cheap cost. The fruit juice and wine pressing industries generate a plethora of fruit wastes annually. Interestingly, fruit pomaces contain appreciable dietary fibre, protein, and phenolic compounds, and thus, their adoption could serve the poultry industry in dual capacities including as substitutes to antibiotics and some conventional feedstuff. Thus, there is a possibility to reduce fruit wastes produced and feed-cost in poultry farming from environmental and economical standpoints, respectively. This review seeks to provide reinforcing evidence on the applicability and impact of fruit pomaces in poultry nutrition.

An Innovative Malaxer Equipped with SCADA Platform for Improving Extra Virgin Olive Oil Quality

Agriculture 4.0 is gaining more attention, and all companies are thinking about innovating machines to increase income and improve the quality of the final products. In the agro-food sector, there is space for innovation, as it is far behind the industrial sector. This paper reports an industrial-scale study on the application of an innovative system for the extraction of Sicilian EVOO (extra virgin olive oil) to improve both process management and the quality of the product. Based on previous studies, the authors suggested an innovative machine equipped with a SCADA (supervisory control and data acquisition system) for oxygen and process duration monitoring and control. The objective of the research was thus to discuss the development of a SCADA platform applied to the malaxer and the establishment of an optimized approach to control the main process parameters for obtaining high-quality EVOO. The SCADA system application in the EVOO extraction process allowed a qualitative improvement of the Sicilian EVOO of Nocellara del Belice and Cerasuola cultivars. The use of the innovative system made it possible to increase the values of tocopherols (by about 25%) in Cerasuola cultivar and total phenol content (by about 30%) in Nocellara del Belice cultivar EVOOs.

Effect of processing technology on chemical, sensory, and consumers' hedonic rating of seven olive oil varieties

This study established physicochemical and sensory characteristics of virgin olive oils (VOOs) and linked them to consumers’ liking using external preference mapping. We used five Tunisian and two foreign VOO varieties produced by two processing systems: discontinuous (sp) and continuous three‐phase decanter (3p). The samples were analyzed and evaluated by a panel of 274 consumers. The external preference mapping revealed five VOO clusters with a consumer preference scores rating from 40% to 65%. Consumers highly appreciated the foreign Coratina cultivar's olive oil; the main drivers being richness in polyphenols (markers of bitterness and pungency), mainly the oleuropein aglycone, and volatile compounds (markers of green fruity, green leaves, green apple, cut grassy almond, and bitterness), particularly the trans‐2‐hexenol. The Tunisian Chemlali (3p) oil was second highly preferred (scoring 55%). The positive drivers for olive oil preference (a profile of almond fruity green and low bitterness and pungency) are the richness in hexanal compounds. Arbequina (sp and 3p) and Chemlali (sp) were the least appreciated due to the fact that Arbequina VOO is not in the tradition of Tunisian consumers, whereas Chemchali VOO is a minor variety representing only 2% of olive oil production in Tunisia and consumed mostly in blends. The differentiation between the two processing systems depends on the variety of cultivar; consumers are able to identify the two processing system in the case of Chetoui, Leguim, and Chemchali.

Optimizing the Malaxation Conditions to Produce an Arbequina EVOO with High Content of Bioactive Compounds

To meet the growing demand for high-quality extra-virgin olive oil (EVOO) with health-promoting properties and pleasant sensory properties, studies are needed to establish optimal production parameters. Bioactive components of EVOO, including phenolic compounds, carotenoids, chlorophylls, tocopherols, and squalene, contribute to its organoleptic properties and beneficial health effects. The aim of this study was to develop an Arbequina EVOO with high phenol content, particularly oleocanthal and oleacein, on a laboratory scale by analyzing the effects of different temperatures (20, 25, and 30 °C) and times (30 and 45 min) of malaxation. Higher temperatures decreased the levels of the phenolic compounds, secoiridoids, tocopherols, and squalene, but increased the pigments. EVOO with the highest quality was produced using malaxation parameters of 20 °C and 30 min, although oleocanthal and oleacein were higher at 30 and 25 °C, respectively. Overall, 20 °C and 30 min were the processing conditions that most favored the physiological and chemical processes that contribute to higher levels of bioactive compounds in the oil and diminished their degradation and oxidation processes.

Olive Sound: A Sustainable Radical Innovation

Olive Sound is the acronym of a Horizon 2020 European Project aimed at the development of a high-flow oil extraction plant, the Sono-Heat-Exchanger, which combines ultrasound and heat exchange in order to break, through a radical innovation model in the oil mill, the historical paradigm that sees as inversely correlated the oil yield and the content of bio-phenols. These compounds are biologically active molecules that transform the product, extra virgin olive oil, from a mere condiment into a functional food. The primary objective of the project, financially supported by the European Union through the “Fast Track to Innovation” program, is the development of a product “ready for the market” (TRL 9) capable of making the involved companies more competitive while increasing the competitiveness of European extra virgin olive oil in the international context.

Cold Storage and Temperature Management of Olive Fruit: The Impact on Fruit Physiology and Olive Oil Quality—A Review

Cold storage of olive fruit has been the subject of study for over more than 50 years. From the 1990s on, an increasing amount of knowledge is build-up about the impact of the conservation on the physiological response of the fruit as well as on the quality of the extracted oil therefrom. This review offers a comprehensive synopsis of this research, discusses the most important influential factors and summarizes the results on the influence of the studied parameters on both the fruit and the oil. Currently, changing climatic conditions, new harvesting techniques and a more demanding consumer market are triggering the need to broaden this strict focus on conservation. A more dynamic view on the effects of temperature from the moment the fruit is harvested up to the oil extraction process, reveals the necessity to manage this crucial influential factor more diversely. An overview of how this management can take form is structured through a focus on the different phases of the postharvest processing and the widely different harvesting scales. Future prospects of research are presented based on the actual state of the art of cold storage research as well as on the necessities that come forward from a broader fruit temperature management perspective.

Chemometric Study of Fatty Acid Composition of Virgin Olive Oil from Four Widespread Greek Cultivars

Virgin olive oil (VOO) is one of the key components of the Mediterranean diet owing to the presence of monounsaturated fatty acids and various bioactive compounds. These beneficial traits, which are usually associated with the cultivar genotype, are highlighting the demand of identifying characteristics of olive oil that will ensure its authenticity. In this work, the fatty acid (FA) composition of 199 VOO samples from Koroneiki, Megaritiki, Amfissis, and Manaki cultivars was determined and studied by chemometrics. Olive cultivar greatly influenced the FA composition, namely, oleic acid (from 75.36% for Amfissis to 65.81% for Megaritiki) and linoleic acid (from 13.35% for Manaki to 6.70% for Koroneiki). Spearman’s rho correlation coefficients revealed differences and similarities among the olive oil cultivars. The use of the forward stepwise algorithm identified the FAs arachidonic acid, gadoleic acid, linoleic acid, α-linolenic acid, palmitoleic acid, and palmitic acid as the most significant for the differentiation of samples. The application of linear and quadratic cross-validation discriminant analysis resulted in the correct classification of 100.00% and 99.37% of samples, respectively. The findings demonstrated the special characteristics of the VOO samples derived from the four cultivars and their successful botanical differentiation based on FA composition.

Influence of the Ripening Stage and Extraction Conditions on the Phenolic Fingerprint of 'Corbella' Extra-Virgin Olive Oil

The ancient ‘Corbella’ olive variety from the center-north of Catalonia is being recovered to obtain quality extra-virgin olive oil (EVOO) with unique organoleptic properties. The aim of this work was to determine the effect of agronomic and technical factors on the phenolic fingerprint of EVOO and to establish the optimum harvesting time and crushing and malaxation conditions for ‘Corbella’ olives. Therefore, three different ripening indices (0.3, 1.2, and 3.2) and three crushing temperatures (10, 18, and 25 OC) were studied. Additionally, a factorial design to optimize the phenolic concentration of the EVOO was developed, applying a range of sieve diameters (4 and 6 mm), and malaxation time (30 and 60 min) and temperature (27, 32, and 37 °C). The phenolic profile was analyzed by ultra-high performance liquid chromatography coupled to mass spectrometry in a tandem detector. The level of secoiridoids, the major phenolic compounds in the oil, was higher when using olives harvested earlier. Oleuropein aglycone and ligstroside aglycone were degraded during crushing at high temperatures, resulting in the formation of oleacein and oleocanthal. The best processing conditions in terms of total phenolic content were found to be 30 min of malaxation at 37 OC, the crushing size not having any affect.

Adjustment of Olive Fruit Temperature before Grinding for Olive Oil Extraction. Experimental Study and Pilot Plant Trials

Harvesting at high temperatures and bulk transport can negatively influence the quality of olives and lead to undesirable alterations in the extracted oil. Cooling the fruit in the field would be the most logical solution, but it means that the olives arrive too cold at the mill for immediate processing. In this work, the use of warm water in the washing tub to warm up the fruit before grinding instead of flash heat treatment on the paste was assessed in two experiments. In the first one, at the laboratory level, the temperature after milling was determined in three olive cultivars, previously stored at 5 or 10 °C, and then submerged at different water temperatures (25, 30, and 35 °C) for 15, 30, 45, and 60 s. In the second one, two batches of olives were cooled in the field at 5 °C and then conditioned with washing water to obtain a paste at the entrance of the pilot plant malaxer at 27 °C. The temperature of the olives was measured at five points from the discharging up to their entering, as paste, into the malaxer. The results demonstrated the feasibility of the method as the temperature of the ground olives was kept at the desired temperature (28 ± 1 °C). The trials highlight the potential for automating an even more precise adjustment of the temperature of the olives before milling once the washing tub is equipped with a safe heating system.

Flavor Chemistry of Virgin Olive Oil: An Overview

Virgin olive oil (VOO) has unique chemical characteristics among all other vegetable oils which are of paramount importance for human health. VOO constituents are also responsible of its peculiar flavor, a complex sensation due to a combination of aroma, taste, texture, and mouthfeel or trigeminal sensations. VOO flavor depends primarily on the concentration and nature of volatile and phenolic compounds present in olive oil which can change dramatically depending on agronomical and technological factors. Another aspect that can change the flavor perception is linked to the oral process during olive oil tasting. In fact, in this case, some human physiological and matrix effects modulate the flavor release in the mouth. The present review aims to give an overview on VOO flavor, with particular emphasis on the mechanisms affecting its production and release during a tasting.

Antioxidant quantification in different portions obtained during olive oil extraction process in an olive oil press mill

BACKGROUND

Different antioxidant compounds are generally transferred from olives to olive oil during the production process. This work characterized the principal total bioactive compounds (tocopherols and phenols) in olives, olive oil and by-products of four cultivars grown in Calabrian areas (southern Italy), considering the effect of harvesting period. Antioxidant capacity, total and individual phenolic compounds were also analysed.

RESULTS

Drupes, olive paste, pomace and olive wastewater showed similar phenolic compounds, while olive oil possessed a different composition, suggesting that phenols are not only transferred from drupe to oil, but also they change during oil production. Tocopherols varied among cultivars and harvesting period: generally, they were more abundant in samples produced in the first harvesting period. Qualitative and quantitative differences in phenolic composition and antioxidant activity were significantly found among cultivars in all the matrices.

CONCLUSION

The highest amount of total phenolic antioxidants ended up in olive wastewater with variability due to the olive cultivar, while only a small part of them finished in the oil. This work shows evidence that the availability of bioactive compounds in different portions from the olive oil extraction belong to different varietal origins. In particular, new information was acquired on Ottobratica Calipa, a new olive clone, that produced an olive oil with an interesting antioxidant amount. © 2020 Society of Chemical Industry.

Olive Fruit Refrigeration during Prolonged Storage Preserves the Quality of Virgin Olive Oil Extracted Therefrom

With the aim to investigate the influence of post-harvest olive fruit storage temperatures on virgin olive oil production parameters, composition and quality, Istarska bjelica (IB) and Rosinjola (RO) fruits were stored for seven days at room temperature (RT), +4 °C and -20 °C prior to oil production. Lower temperatures delayed post-harvest maturation of IB fruits. Theoretical oil content did not change depending on the storage temperature, while the highest oil yield and extractability index were obtained after storage at RT. Chlorophylls decreased in IB-RT and in IB-20. A decrease in the sensory quality of oils was detected after fruit storage at RT and -20 °C, while the refrigeration temperature of +4 °C preserved it. Regarding the content of fatty acid ethyl esters, an increase was observed in IB-RT oils. Storage at RT increased the content of waxes, while the lower temperatures partially suppressed this phenomenon. In oils of both cultivars, storage at +4 °C preserved the concentration of most phenolic compounds at a level more similar to that of the fresh oil when compared to the other two treatments. In the production conditions, when prolonged fruit storage is necessary, refrigeration seems to be the most suitable option.

Impact of the malaxation temperature on the phenolic profile of cv. Cobrançosa olive oils and assessment of the related health claim

Phenolic compounds contribute to the bioactive properties of olive oil. However, olive oils can only support a health claim concerning the protection against oxidative stress depending on the polyphenolic concentration, requiring effective measures during extraction to preserve/enhance their concentrations. The effect of the malaxation temperature (22, 28 and 34 °C) on the phenolic profile was studied for industrially extracted cv. Cobrançosa oils. Higher malaxation temperatures decreased the contents of the majority of the chromatographically detected compounds (P < 0.05, one-way ANOVA), enabling oils' differentiation. This decreasing trend was observed for hydroxytyrosol and tyrosol bound forms, determinant for the health claim, which were also negatively affected by temperature, despite revealing that all the industrially extracted oils tested supported the health claim. The observed constant free to bound forms ratio showed that the temperature range tested had a minor effect on bound-forms hydrolysis, being both free and bound forms equally affected by temperature.

Influence of Harvest Time and Malaxation Conditions on the Concentration of Individual Phenols in Extra Virgin Olive Oil Related to Its Healthy Properties

The phenolic fraction of the extra virgin olive oil (EVOO) has been studied over the past two decades because of its important health protective properties. Numerous studies have been performed in order to clarify the most crucial factors that affect the concentration of the EVOO’s phenolic fraction and many contradictory results have been reported. Having as target to maximize the phenolic content of EVOO and its healthy properties we investigated the impact of harvest time, malaxation temperature, and malaxation duration on the concentration of individual phenols in extra virgin olive oil. Olive oil was prepared in a lab-scale olive mill from different varieties in Greece. The extraction process for cultivar (cv) Koroneiki samples was performed at five different harvest periods from the same trees with three different malaxation temperatures and five different malaxation duration times (N = 75). Similar types of experiments were also performed for other varieties: cv Athenolia (N = 20), cv Olympia (N = 3), cv Kalamata (N = 3), and cv Throubolia Aegean (N=3) in order to compare the changes in the phenolic profile during malaxation. The quantitative analysis of the olive oil samples with NMR showed that the total phenolic content has a negative correlation with the ripening degree and the malaxation time. The NMR data we collected helped us to quantitate not only the total phenolic content but also the concentration of the major phenolic compounds such as oleocanthal, oleacein, oleokoronal, and oleomissional. We noticed different trends for the concentration of these phenols during malaxation process and for different malaxation temperatures. The different trends of the concentration of the individual phenols during malaxation and the completely different behavior of each variety revealed possible biosynthetic formation steps for oleocanthal and oleacein and may explain the discrepancies reported from previous studies.

Change in some quality parameters and oxidative stability of olive oils with regard to ultrasound pretreatment, depitting and water addition

•

In this study we propose an innovative application of ultrasounds in virgin olive oil processing.

•

Ultrasound treatment was applied to olive in order to reducing the malaxation step.

•

This study will bring useful data to get optimum parameters of ultrasound application.

Ultrasound pretreatment with different times (0, 4, 8, 10 min) on olive paste previous malaxation of olive oil extraction along with depitting and water application procedures were studied. The effects of these procedures on oil yield, quality parameters and oxidative stability have been studied. Therefore, the olive oil yield increase with increasing time of ultrasound treatment. On the other hand, the application of ultrasound did not adversely affect the quality characteristics, as well as the antioxidant activity, when comparing with untreated paste. Furthermore, the oxidative stability data, we can conclude that ultrasound treatment can affect the olive oil oxidative stability. This study could provide useful information for industry to produce olive oil with high yield and quality.

The phenolic profile of virgin olive oil is influenced by malaxation conditions and determines the oxidative stability

Phenolic compounds largely contribute to the nutraceutical properties of virgin olive oil (VOO), the organoleptic attributes and the shelf life due to their antioxidant capabilities. Due to the relevance of malaxation in the oil extraction process, we tested the effects of malaxation time on the concentrations of relevant phenolic compounds in VOO, and we evaluated the influence of performing malaxation under vacuum. An increase in malaxation time significantly decreased the concentrations of aglycone isomers of oleuropein and ligstroside but, conversely, increased the oleocanthal and oleacein contents. Additionally, malaxation under vacuum led to an increase in phenolic contents compared to standard conditions carried out at atmospheric pressure. Finally, we explored the possibility of predicting the VOO oxidative stability on the basis of the phenolic profile, and a model (R² = 0.923; p < 0.0001) was obtained by combining the concentration of the VOO phenolic compounds and the main fatty acids.

Simultaneous Determination of Pigments, Tocopherols, and Squalene in Greek Olive Oils: A Study of the Influence of Cultivation and Oil-Production Parameters

A new facile and fast method was developed in this study for the determination of pigments (chlorophylls and carotenoids), tocopherols (α-, sum of (β + γ), and δ), and squalene in olive oil. This method consisted of a dilution of olive oil in 2-propanol, followed by reversed phase-high-pressure liquid chromatography equipped with a diode array detector (RP-HPLC-DAD). Chromatographic separation was performed using a C18 column, while the mobile phase consisted of acetonitrile and methanol using a gradient elution program. The methodology was optimized, validated, and applied to the analysis of 452 samples of Extra Virgin Olive Oil (EVOOs) and Virgin Olive Oil (VOOs) originated from five islands of the Northeastern Aegean Region, in Greece. From the obtained results, it was indicated that the carotenoid, tocopherol, and squalene content was relatively high, while the chlorophyll content was low. Furthermore, the acquired results were studied and compared in order to obtain useful information about the correlation of the concentration levels of these compounds in olive oil to different cultivation and olive oil production parameters. Several parameters were found to play a significant role on the pigment and antioxidant content of olive oil, such as the olive tree variety, geographical origin, fruit maturation stage during harvesting, and addition of water during malaxation, while other parameters such as the altitude of cultivation, the type of farming (organic or conventional), and the type of olive mill did not seem to affect the levels of these compounds.

Health-promoting properties of oleocanthal and oleacein: Two secoiridoids from extra-virgin olive oil

Extra virgin olive oil (EVOO) polyphenols, including the secoiridoids oleocanthal (OLC) and oleacein (OLE), are attracting attention because of their beneficial effects on health. Data on OLC and OLE bioavailability are scarce, as most research on EVOO polyphenols has concentrated on hydroxytyrosol, tyrosol, and oleuropein. Consequently, relevant goals for future research are the elucidation of OLC and OLE bioavailability and finding evidence for their beneficial effects through pre-clinical and clinical studies. The aim of this review is to shed light on OLC and OLE, focusing on their precursors in the olive fruit and the impact of agronomic and processing factors on their presence in EVOO. Also discussed are their bioavailability and absorption, and finally, their bioactivity and health-promoting properties.

Effects of Organic and Conventional Growing Systems on the Phenolic Profile of Extra-Virgin Olive Oil

Extra-virgin olive oil (EVOO) is largely appreciated for its proven nutritional properties. Additionally, organic foods are perceived as healthier by consumers. In this context, the aim of the present study was to compare the phenolic profiles of EVOO from olives of the Hojiblanca variety, cultivated under organic and conventional systems. The quantification and identification of individual polyphenols was carried out by liquid chromatography coupled to mass spectrometry in tandem mode (LC-MS/MS). Significantly higher levels (p < 0.05) of phenolic compounds were found in organic EVOOs. The methodology used was able to detect previously unreported differences in bioactive components between organic and conventional EVOOs.

Industrial Ultrasound Applications in The Extra-Virgin Olive Oil Extraction Process: History, Approaches, and Key Questions

Taking an idea from a basic concept to a commercially available product is highly rewarding, but it can be a very long, complex, and difficult journey. Recognizing and understanding the stages of the process and using the right support to help you navigate through it can mean all the difference between success and failure. The road from concept to market is marred with obstacles, and many businesses fail to pass beyond the development stage. A better understanding of the innovation process is essential from the outset if the pioneers of innovation are to overcome the dangers that they are likely to face along the way and maximize their opportunities for success. In the olive oil sector, the most recent radical innovation is the introduction of ultrasound into the industrial extraction process. Many efforts have been made in order to overcome the Valley of Death. The strategy of designing, implementing, and testing an innovative system that combines the mechanical energy of ultrasound with the possibility of modulating the thermal exchange of olive paste (heating or cooling) has enabled the following: (1) Eliminating malaxation by realizing a real continuous process; (2) raising extraction yields by recovering a further quota of extra-virgin olive oil that is usually lost in the pomace; (3) improving the content of antioxidant molecules simultaneously with yields; and (4) offering a sustainable plant solution that can guarantee the right income for producers.

Expert System for Monitoring the Malaxing State of the Olive Paste Based on Computer Vision †

The malaxing of olive paste is one of the most important sub-processes in the virgin olive oil production process. The master continuously supervises the olive paste inside the themomixer to assess the preparation state of the olive paste and he acts manually over the process variables. The viscosity, granularity, and the presence of olive oil over the paste are the main indicators of the olive paste state. Furthermore, the temperature, time, coadjuvant addition and the shovel speeds are the process variables in the thermomixer. In this work, different image-processing parameters have been proposed to automatically assess the aforementioned indicators and they have been used as inputs in the designed fuzzy controller. Also, the outputs of this controller have been evaluated according to a sequence of images obtained inside the thermomixer and during the malaxing process in a real olive mill.