Valorization of fisheries by-products: Challenges and technical concerns to food industry

From Its Nature to Its Function: Marine-Collagen-Based-Biomaterials for Hard Tissue Applications

Impact statement This review discusses the research done using marine collagens (MCs) on biomaterials for bone, cartilage, and osteochondral tissue regenerative applications with the underlying technologies that enable their development, and explains the methodologies used to characterize MCs highlighting their importance, namely regarding the performance of derived biomaterials, and the inherent properties of such collagens. In the second part, the applicability of MCs as biomaterials for hard tissue applications was studied, focusing on the mostly applied fabrication techniques. In conclusion, this review describes the major challenges to be overcome and the forecast for the upcoming years concerning the use of MCs.

Chemical Composition and Elements Concentration of Fillet, Spine and Bones of Common Carp (Cyprinus carpio) in Relation to Nutrient Requirements for Minerals

The aim of the study was to compare the content of major components, selected elements and heavy metals in the fillet, spine and bones of a carp (Cyprinus carpio). Moreover, the extent to which a prepared portion of carp tissue (100 g of fillet and 10 g of carp spine or bones) met the requirements for analyzed elements in adults (women and men) and children was calculated. The proximate composition (total protein, total lipid, ash, moisture) and mineral content of the fish samples were determined. The nutrient composition presented fluctuations among the different tissues. Moisture was the main constituent in the fillet and in the spine with 77.8% and 56.0%, respectively, whereas in bones, the main ingredient was ash (36.2%). All carp tissues were good sources of protein, with 16.5%, 21.0% and 17.0% in spine, bones and fillet, respectively. The most abundant main elements were the potassium in the fillet (4005 mg kg-1) and calcium in the bones (116,463 mg kg-1). The most abundant trace elements were iron in fillet and zinc in bones and spine. Carp meat can be considered a safe foodstuff in terms of concentrations of Hg, Pb and Cd, as the levels of these contaminants were less than FAO and European Commission maximum guidelines.

Biochemical characterization of acid proteases from the stomach of palometa (Pygocentrus nattereri, Kner 1858) with potential industrial application

Pepsin is one of the major enzymes with significant importance in the food industry, biomedicines, and pharmaceutical formulations. In this work, the main objective was to biochemically characterize a pepsin-like enzymatic extract obtained from Pygocentrus nattereri, a predatory freshwater fish, focusing on their potential industrial application. The obtained extract exhibited optimal activity at 45 °C and pH 1.0-2.0. These proteases remained stable after 2 h of incubation at temperatures ranging from 0° to 45 °C and within pH range of 1.0 to 7.0. Their activity was significantly affected in presence of pepstatin A and SDS, 10 μM and 3.46 mM respectively, while EDTA and PMSF showed partial inhibitory effects. Divalent cations (Ca2+ and Mg2+) did not inhibit the proteolytic activity of the extract; in fact, it improved at a 5 mM CaCl2 concentration. As the NaCl concentration increased, the enzyme activity decreased. However, after desalination, 90 % of the activity was recovered within the tested exposure time. Besides, this extract demonstrated exceptional versatility across diverse industrial applications, including collagen extraction augmentation, IgG hydrolysis facilitation, and silver and polyester recovery from X-ray films. Our results suggest that the obtained enzymatic extract has a wide range of potential applications.

Upcycling of seafood side streams for circularity

The upcycling of seafood side streams emerges as a crucial facet in the quest for circularity within the food industry, surpassing other food sources in its significance. Seafood side stream plays an indispensable role in global food security and human nutrition. Nevertheless, losses ensue throughout the seafood supply chain, resulting in substantial waste generation. These underutilized seafood by-products contain valuable resources like edible proteins and nitrogenous compounds. Projections indicate that fishery products' utilization for human consumption will soar to 204 MT by 2030. Yet, the industry annually generates millions of tonnes of waste, predominantly from crab, shrimp, and lobster shells, leading to environmental impacts due to COD and BOD issues. A five-tier circular economic model offers a framework to manage seafood side-streams efficiently, with applications spanning pharmaceuticals, food production, animal feed, fertilizers, and energy fuel, thereby maximizing their potential and reducing waste in line with sustainability goals.

A review on versatile applications of biomaterial/polycationic chitosan: An insight into the structure-property relationship

Chitosan is a versatile and generous biopolymer obtained by alkaline deacetylation of naturally occurring chitin, the second most abundant biopolymer after cellulose. The excellent physicochemical properties of polycationic chitosan are attributed to the presence of varied functional groups such as amino, hydroxyl, and acetamido groups enabling researchers to tailor the structure and properties of chitosan by different methods such as crosslinking, grafting, copolymerization, composites, and molecular imprinting techniques. The prepared derivatives have diverse applications in the food industry, water treatment, cosmetics, pharmaceuticals, agriculture, textiles, and biomedical applications. In this review, numerous applications of chitosan and its derivatives in various fields have been discussed in detail with an insight into their structure-property relationship. This review article concludes and explains the chitosan's biocompatibility and efficiency that has been done so far with future usage and applications as well. Moreover, the possible mechanism of chitosan's activity towards several emerging fields such as energy storage, biodegradable packaging, photocatalysis, biorefinery, and environmental bioremediation are also discussed. Overall, this comprehensive review discusses the science and complete information behind chitosan's wonder function to improve our understanding which is much needful as well as will pave the way towards a sustainable future.

Comprehensive review: by-products from surimi production and better utilization

Over 1 million MT of surimi is produced globally, which theoretically would generate approximate 2 million MT of solid by-products and more than 1 million MT of wash water. Utilization of the by-products has increasingly become interested based on their nutritional, economical, and environmental issues. Surimi by-products represent an important source of valuable compounds such as functional protein, collagen, gelatin, fish oil, peptides, minerals, and enzymes. Better utilization of the by-products would make the surimi industry sustainable and profitable. This review paper characterizes sources and composition of the solid by-products and wash water generated from the surimi production as well as factors related to extraction and processing techniques. In addition, the potential food applications are explored including specialty foods and snacks, flavor ingredients, bioactive ingredients, and functional ingredients. Moreover, an outlook summarizing the challenges and prospects on the utilization of surimi by-products is provided.

Current and Expected Trends for the Marine Chitin/Chitosan and Collagen Value Chains

Chitin/chitosan and collagen are two of the most important bioactive compounds, with applications in the pharmaceutical, veterinary, nutraceutical, cosmetic, biomaterials, and other industries. When extracted from non-edible parts of fish and shellfish, by-catches, and invasive species, their use contributes to a more sustainable and circular economy. The present article reviews the scientific knowledge and publication trends along the marine chitin/chitosan and collagen value chains and assesses how researchers, industry players, and end-users can bridge the gap between scientific understanding and industrial applications. Overall, research on chitin/chitosan remains focused on the compound itself rather than its market applications. Still, chitin/chitosan use is expected to increase in food and biomedical applications, while that of collagen is expected to increase in biomedical, cosmetic, pharmaceutical, and nutritional applications. Sustainable practices, such as the reuse of waste materials, contribute to strengthen both value chains; the identified weaknesses include the lack of studies considering market trends, social sustainability, and profitability, as well as insufficient examination of intellectual property rights. Government regulations, market demand, consumer preferences, technological advancements, environmental challenges, and legal frameworks play significant roles in shaping both value chains. Addressing these factors is crucial for seizing opportunities, fostering sustainability, complying with regulations, and maintaining competitiveness in these constantly evolving value chains.

Substitution Impact of Tuna By-Product Meal for Fish Meal in the Diets of Rockfish (Sebastes schlegeli) on Growth and Feed Availability

This experiment was performed to assess the substitution impact of fish meal (FM) with tuna by-product meal (TBM) in feeds on growth and feed availability of the early stage of juvenile rockfish (S. schlegeli). Six experimental feeds were prepared to be isonitrogenous and isolipidic. Fifty-five percent of FM was contained in the control (Con) diet. In the Con diet, 20, 40, 60, 80, and 100% FM were replaced by TBM, named the TBM20, TBM40, TBM60, TBM80, and TBM100 diets, respectively. A total of 540 early-stage juvenile rockfish averaging 2.4 g was divided into 18 tanks and hand-fed to satiation for 56 days. Weight gain and feed consumption of rockfish fed the TBM20 and TBM40 diets were comparable to rockfish fed the Con diet. The specific growth rate (SGR) of rockfish fed the Con diet was comparable to rockfish fed the TBM20, TBM40, and TBM60 diets. Feed efficiency, biometric indices, hematological parameters, proximate composition, and amino acid profiles of rockfish were not impacted by dietary treatments. The economic profit index (EPI) of the Con, TBM20, and TBM40 diets were higher than that of all other diets. FM up to 40% could be substitutable with TBM in the diets of rockfish without deteriorating weight gain and feed consumption, but producing the highest EPI.

Feasibility of Enzymatic Protein Extraction from a Dehydrated Fish Biomass Obtained from Unsorted Canned Yellowfin Tuna Side Streams: Part I

This study presents for the first time a scalable process for the extraction of valuable proteins starting from samples of unsorted mixed tuna scraps which were previously dehydrated by an industrial patented process. The aims of this work were both to avoid the onerous sorting step of tuna leftovers, which generally consists of isolating skin and bones for collagen/gelatin extraction, and to improve the logistic of managing highly perishable biomass thanks to the reduction in its volume and to its microbiological stabilization. In view of a zero-waste economy, all the protein fractions (namely, non-collagenous proteins NCs and ALKs, gelatin, and hydrolyzed gelatin peptides, HGPs) isolated in the proposed single cascade flowchart were stabilized and preliminarily characterized. The extraction flowchart proposed allows one to obtain the following most promising compounds: 1.7 g of gelatin, 3.2 g of HGPs, and 14.6 g of NCs per 100 g of dehydrated starting material. A focus on oven-dried gelatin was reported in terms of proximate analysis, amino acid composition, color parameters, FT-IR spectrum, pH, and viscoelastic properties (5 mPa·s of viscosity and 14.3 °C of gelling temperature). All the obtained extracts are intended to be exploited in food supplements, feed, fertilizers/plant bio-stimulants, packaging, and the cosmetic industry.

Trash to Treasure: An Up-to-Date Understanding of the Valorization of Seafood By-Products, Targeting the Major Bioactive Compounds

Fishery production is exponentially growing, and its by-products negatively impact industries' economic and environmental status. The large amount of bioactive micro- and macromolecules in fishery by-products, including lipids, proteins, peptides, amino acids, vitamins, carotenoids, enzymes, collagen, gelatin, chitin, chitosan, and fucoidan, need to be utilized through effective strategies and proper management. Due to the bioactive and healthy compounds in fishery discards, these components can be used as functional food ingredients. Fishery discards have inorganic or organic value to add to or implement in various sectors (such as the agriculture, medical, and pharmaceutical industries). However, the best use of these postharvest raw materials for human welfare remains unelucidated in the scientific community. This review article describes the most useful techniques and methods, such as obtaining proteins and peptides, fatty acids, enzymes, minerals, and carotenoids, as well as collagen, gelatin, and polysaccharides such as chitin-chitosan and fucoidan, to ensure the best use of fishery discards. Marine-derived bioactive compounds have biological activities, such as antioxidant, anticancer, antidiabetic, anti-inflammatory, and antimicrobial activities. These high-value compounds are used in various industrial sectors, such as the food and cosmetic industries, owing to their unique functional and characteristic structures. This study aimed to determine the gap between misused fishery discards and their effects on the environment and create awareness for the complete valorization of fishery discards, targeting a sustainable world.

Trends in fisheries waste utilization: a valuable resource of nutrients and valorized products for the food industry

The rise in fisheries production worldwide has caused a remarkable increase in associated anthropogenic waste. This poses significant concerns due to adverse environmental impacts and economic losses. Owing to its renewability, high abundance, and potential as a rich source of many nutrients and bioactive compounds, strategies have been developed to convert fish waste into different value-added products. Conventional and improved methods have been used for the extraction of biomolecules from fish waste. The extracted fish waste-derived value-added products such as enzymes, peptides, fish oil, etc. have been used to fortify different food products. This review aims to provide an overview of the nature and composition of fish waste, strategies for extracting biomolecules from fish waste, and the potential application of fish waste as a source of calcium and other nutrients in food fortification and animal feed has been discussed. In context to fishery waste mitigation, valorization, and circular bioeconomy approach are gaining momentum, aiming to eliminate waste while producing high-quality value-added food and feed products from fishery discards.

Downregulation of Peroxidase Activity of Platinum Cube Enables Minute-Time Scale Colorimetric Signaling of Hypoxanthine for Fish Freshness Monitoring

Due to its unique biological composition, aquatic products, especially fish, are extremely perishable compared to other muscle products. Herein, we proposed an artificial nanozyme-based colorimetric detection of hypoxanthine (Hx), the indicator of fish freshness, in a minute-time scale without the assistance of a natural enzyme (hypoxanthine oxidase). The principle is based on the interaction between Hx and polyvinylpyrrolidone-modified platinum cubic nanomaterials (PVP-PtNC), in which the catalytic active sites of PVP-PtNC's surface were blocked by Hx. This causes the downregulation of PVP-PtNC's catalytic ability and weakened its ability to catalyze the oxidization of 3,3',5,5'-Tetramethylbenzidine (TMB) by H₂O₂. Accordingly, the decrease in the UV-vis absorption and the weakening of the colorimetric reaction color is proportional to the Hx concentration. On this basis, a target-triggered colorimetric method for detecting Hx is developed for fish freshness monitoring with a fast detection speed, low cost, high accuracy, and simplified operation. Experiments reveal that the correlation response of Hx is from 0.5 μM to 10 mM with a limit of detection of 0.16 μM. In particular, the Hx detected from real fish indicates that the method possesses a promising potential for practical application. All of these features are expected to promote the development of online detection tools for food safety monitoring.

Upcycling Fish By-Products into Bioactive Fish Oil: The Suitability of Microwave-Assisted Extraction

The seafood industry is often left out of the food waste discussion, but this sector is no exception, as it generates large amounts of various by-products. This study aimed to explore the potential of the microwave-assisted extraction (MAE) technique to obtain high-quality oil from fish by-products. The independent variables, which were time (1-30 min), microwave power (50-1000 W), and solid/liquid ratio (70-120 g/L) were combined in a 20-run experimental design coupled with the response surface methodology (RSM) for process optimization. The obtained oil yield values were fitted to a quadratic equation to build the theoretical models, which were statistically validated based on statistical criteria and used to predict the optimal MAE condition. The oil yields were significantly affected by the three independent variables through linear, quadratic, and/or interactive effects. Compared to a conventional Soxhlet extraction (SE), the optimal MAE conditions allowed between 60 and 100% of oil to be recovered in less than 19 min and with less solvent consumption. The fatty acid profiles of the oils obtained through SE and optimized MAE were characterized by gas chromatography with flame ionizing detection (GC-FID) after a derivatization process. These oils were constituted mainly of health, beneficial unsaturated fatty acids, such as oleic, docosahexaenoic (DHA), linoleic, and eicosapentaenoic (EPA) acids, which were not affected (p > 0.05) by the extraction methods. Interestingly, the oils obtained through MAE showed the best microbial growth inhibition results may have been due to thermolabile compounds, preserved via this unconventional non-thermal method. The oils also exhibited anti-inflammatory effects via nitric oxide production inhibition and cytotoxic potential especially, against breast and gastric adenocarcinoma cells. However, the threshold of toxicity should be further investigated. Overall, this work emerges as a future-oriented approach to upcycling fish by-products into high-quality oils that can be used in the formulation of pet food and other products.

Protein hydrolysates derived from aquaculture and marine byproducts through autolytic hydrolysis

Autolysis technology has shown potential for protein hydrolysates production from marine and aquaculture byproducts. Viscera are a source of cheap proteolytic enzymes for producing protein hydrolysates from the whole fish or processing byproducts of the most valuable commercial species by applying autolysis technology. The use of autolysis allows economical production of protein hydrolysate and provides an opportunity to valorize downstream fish and shellfish processing byproducts at a lower cost. As a result, production and application of marine byproduct autolysates is increasing in the global protein hydrolysates market. Nevertheless, several restrictions occur with autolysis, including lipid and protein oxidation mediated by the heterogeneous composition of byproducts. The generally poor storage and handling of byproducts may increase the formation of undesirable metabolites during autolysis, which can be harmful. The formation of nitrogenous compounds (i.e., biogenic amines), loss of freshness, and process of autolysis in the byproducts could increase the rate of quality and safety loss and lead to more significant concern about the use of autolysates for human food applications. The current review focuses on the autolysis process, which is applied for the hydrolysis of aquaculture and marine discards to obtain peptides as functional or nutritive ingredients. It further addresses the latest findings on the mechanisms and factors contributing the deterioration of byproducts and possible ways to control oxidation and other food quality and safety issues in raw materials and protein hydrolysates.

Nutritional and bioactive oils from salmon (Salmo salar) side streams obtained by Soxhlet and optimized microwave-assisted extraction

The efficiency of the microwave-assisted extraction (MAE) technique on recovering nutritional and bioactive oils from salmon (Salmo salar) side streams was evaluated and compared to Soxhlet extraction. The response surface methodology (RSM) coupled with a central composite rotatable design was used to optimize time, microwave power, and solid/liquid ratio of the MAE process in terms of oil yield. The optimal MAE conditions were 14.6 min, 291.9 W, 80.1 g/L for backbones, 10.8 min, 50.0 W, 80.0 g/L for heads, and 14.3 min, 960.6 W, 99.5 g/L for viscera, which resulted in a recovery of 69% of the total lipid content for backbones and heads and 92% for viscera. The oils obtained under optimal MAE conditions showed a healthy lipid profile as well as cytotoxic, antioxidant, anti-inflammatory, or antimicrobial properties. These results highlight that oils from underutilized salmon by-products could be exploited by different industrial sectors under the circular economy approach.

Functional proteins through green refining of seafood side streams

Scarcity of nutritive protein is a major global problem, the severity of which is bound to increase with the rising population. The situation demands finding additional sources of proteins that can be both safe as well as acceptable to the consumer. Food waste, particularly from seafood is a plausible feedstock of proteins in this respect. Fishing operations result in appreciable amounts of bycatch having poor food value. In addition, commercial processing results in 50 to 60% of seafood as discards, which consist of shell, head, fileting frames, bones, viscera, fin, skin, roe, and others. Furthermore, voluminous amounts of protein-rich effluents are released during commercial seafood processing. While meat from the bycatch can be raw material for proteinous edible products, proteins from the process discards and effluents can be recovered through biorefining employing upcoming, environmental-friendly, low-cost green processes. Microbial or enzyme treatments release proteins bound to the seafood matrices. Physico-chemical processes such as ultrasound, pulse electric field, high hydrostatic pressure, green solvent extractions and others are available to recover proteins from the by-products. Cultivation of photosynthetic microalgae in nutrient media consisting of seafood side streams generates algal cell mass, a rich source of functional proteins. A zero-waste marine bio-refinery approach can help almost total recovery of proteins and other ingredients from the seafood side streams. The recovered proteins can have high nutritive value and valuable applications as nutraceuticals and food additives.

Biochemical and Microstructural Properties of Lizardfish (Saurida tumbil) Scale Collagen Extracted with Various Organic Acids

The purpose of this research was to extract collagen from the scales of lizardfish (Saurida tumbil) using various acids. Acetic acid-extracted collagen (AScC) produced a higher yield (1.8 mg/g) than lactic acid-extracted collagen (LScC) and citric acid-extracted collagen (CScC) although not significantly different (p > 0.05). All extracted collagens were categorized as type I collagens with the presence of alpha chains (α1 and α2) based on the SDS-PAGE profiles. The triple-helical structure of the collagen was maintained in the AScC, LScC, and CScC as confirmed by the FTIR spectra. The UV-vis and X-ray diffraction spectra observed in all collagens were in agreement with previous work on fish scale and calfskin (commercial) collagens. The thermal stability of AScC (Tmax = 31.61 °C) was greater than LScC (Tmax = 30.86 °C) and CScC (Tmax = 30.88 °C). The microstructure of acid-extracted collagens was characterized as complex, fibrous, and multilayered, with irregular sheet-like structures. All samples were highly soluble in acidic pH (1.0−4.0) and in low concentrations of NaCl (0−20 g/L). In conclusion, the lizardfish scale collagen, particularly AScC, may be used as an alternative to terrestrial animal collagen.

Noordin WN, Huda N. Biochemical analysis of collagens from the bone of lizardfish (Saurida tumbil Bloch, 1795) extracted with different acids

Background

Lizardfish (Saurida tumbil Bloch, 1795) bone is a fish by-product generated during industrial surimi processing. This by-product is an important source of collagen production since the use of terrestrial animal-based collagens no longer sought due to concern regarding the transfer of infectious diseases and religious issues. Hence, this study was carried out to determine the biochemical analysis of collagens from the bone of lizardfish extracted with different acids.

Methods

Lizardfish bone collagens were extracted with various acids (i.e., acetic, lactic and citric acids). All extraction processes were conducted in a chiller room (4 °C). The extracted collagens were biochemically characterized, such as hydroxyproline content, Ultraviolet (UV) absorption, X-ray diffraction (XRD), Fourier transform infrared spectroscopy spectra (FTIR), Differential scanning calorimetry (DSC) and solubility in different pH values and NaCl concentrations.

Results

The yield of extracted collagens ranged between 1.73% and 2.59%, with the highest (p < 0.05) observed in citric acid-extracted collagen (CaEC). Protein patterns confirmed that all-collagen samples had two identical subunits, α1 and α2, representing type I collagen. The highest whiteness value was found in acetic acid-extracted collagen (AaEC), but there was no significant difference (p ≥ 0.05) compared to lactic acid-extracted collagen (LaEC). UV absorption and XRD analysis reflected the characteristics of the collagen, as reported in the literature. For the FTIR, all acid-extracted collagen samples presented a triple helical structure. The thermal transition temperature (T _max = 77.92-89.04 °C) was in accordance with collagen extracted from other fish species. All extracted collagens were highly soluble in acidic pH and low concentrations of NaCl (0-20 g/L). In conclusion, collagens extracted from lizardfish bone may be used as alternative sources of collagen in industrial settings, and AaEC would be considered superior in terms of the characteristics evaluated in this study.

Sustainable edible packaging systems based on active compounds from food processing byproducts: A review

The global food processing industries represent a challenge and a risk to the environment due to the poor handling of residues, which are often discarded as waste without being used in further sidestreams. Although some part of this biomass is utilized, large quantities are, however, still under- or unutilized despite these byproducts being a rich resource of valuable compounds. These biowastes contain biopolymers and other compounds such as proteins, polysaccharides, lipids, pigments, micronutrients, and minerals with good nutritional values and active biological properties with applications in various fields including the development of sustainable food packaging. This review offers an update on the recent advancement of food byproducts recycling and upgrading toward the production of food packaging materials, which could be edible, (bio)degradable, and act as carriers of biobased active agents such as antimicrobials, antioxidants, flavoring additives, and health-promoting compounds. This should be a global initiative to promote the well-being of humans and achieve sustainability while respecting the ecological boundaries of our planet. Edible films and coatings formulations based on biopolymers and active compounds extracted from biowastes offer great opportunities to decrease the devastating overuse of plastic-based packaging. It has become evident that a transition from a fuel-based to a circular bio-based economy is potentially beneficial. Therefore, the exploitation of food discards within the context of a zero-waste biorefinery approach would improve waste management by minimizing its generation, reduce pollution, and provide value-added compounds. Most importantly, the development of edible packaging materials from food byproducts does not compete with food resources, and it also helps decrease our dependency on petroleum-based products. Practical Application Almost 99% of current plastics are petroleum-based, and their continuous use has been devastating to the planet as plastic-derived components have been detected in all trophic levels. Besides, the increasing amounts of food by-products are a socioeconomic and environmental challenge, and halving food loss and waste and turning it into valuable products has become necessary to achieve sustainability and economic circularity. The development of new packaging systems such as edible materials could be one of the solutions to limit the use of persistent plastics. Edible films and coatings by-products-based could also enhance food packaging performance due to their compounds' bioactivities.

Quantification and mapping of fish waste in retail trade and restaurant sector: Experience in Emilia-Romagna, Italy

The circular economy approach imposes the complete recovery of components, materials and energy from waste. Many active compounds with biomedical and nutraceutical applications can be extracted by Fish Waste (FW), but few are the operating industrial plants. Quantification and mapping of the potential FW availability along the entire fish value-chain is crucial in fostering its actual valorisation. Apart at industrial processing, in the distribution segment the estimation of FW availability is absent. This paper aimed to quantify and locate FW generated by point sources such as supermarkets, fishmongers and restaurants as well as to establish the diffuse domestic FW production in a 4,5M inhabitants region. The study provides an exportable method and indications for comparable worldwide areas. A simplified valorisation scenario for equivalent biomethane production is also presented. Direct interviews and indirect approach based on fish consumption have been adopted and compared. Large supermarkets and medium-large restaurants are the main FW producers (239 and 125 kg/week, respectively) followed medium-large fishmongers and medium supermarkets (63 and 86 kg/week, respectively). In the investigated region the larger FW point sources are supermarkets (average 3000 Mg/y), while fishmongers are the smaller (average 750 Mg/y). Restaurants (average 1400 Mg/y) show the wider range of variability between 460 and 8000 Mg/y. The indirect methodology reveals that domestic FW production ranges from 2376 to 3961 Mg/y. Per capita estimations of FW ranged from 0.5 - 3 kg/y. The economic value of FW (biomethanation route) is 68 EUR/Mg. A qualification as "highly potential waste" would promote FW valorization.

Effect of Different Processing Methods on Quality, Structure, Oxidative Properties and Water Distribution Properties of Fish Meat-Based Snacks

Snack foods are consumed around to globe due to their high nutrition, taste and versatility; however, the effects of various processing methods on quality, structure and oxidative properties are scare in the literature. This study aims to evaluate the effect of various processing methods (frying, baking and microwave cooking) on quality, structure, pasting, water distribution and protein oxidative properties of fish meat-based snacks. The results showed that the frying method induced a significantly (p < 0.05) higher expansion than baking and microwave methods. Texture in terms of hardness was attributed to the rapid loss of water from muscle fiber, which resulted in compact structure and the increased hardness in microwave cooking, whereas in frying, due to excessive expansion, the hardness decreased. The pasting properties were significantly higher in baking, indicating the sufficient swelling of starch granules, while low in microwave suggest the rapid heating, which degraded the starch molecules and disruption of hydrogen bonds as well as glycosidic linkage and weakening of granules integrity. The water movement assessed by Low Field Nuclear Magnetic Resonance (LF-NMR) showed that frying had less tight and immobilized water, whereas microwave and baking had high amounts of tight and immobilized water, attributing to the proper starch-protein interaction within matrix, which was also evidenced by scanning electron microscopy (SEM) analysis. The protein oxidation was significantly (p < 0.05) higher in frying compared to baking and microwave cooking. The findings suggest the endorsement of baking and microwave cooking for a quality, safe and healthy snacks.

Collagen-Based Bioactive Bromelain Hydrolysate from Salt-Cured Cod Skin

Considerable amounts of fish processing by-products are discarded each year. About 30% of this material may be skin and bone. Fish skin has more than 80% of its total protein content as collagen. Furthermore, in recent years, there has been a growing demand for collagen-based peptides due to their beneficial health effects. So, the objective of the present study was to optimise the obtaining bioactive hydrolysates from salt-cured cod skin using the protease Bromelain at 0.5% (w/w) concentration. This study developed a sustainable process that consumes less time and energy and uses an alternative source as raw material. In addition, bromelain allows hydrolysates with important antioxidant (ORAC, 514 μmol Trolox Equivalent/g protein) and antihypertensive activities (inhibition of ACE, IC50 of 166 μg protein/mL) as well as excellent biocompatibility with dermal and subcutaneous cells.

Study of biological activities and physicochemical properties of Yamú (Brycon siebenthalae) viscera hydrolysates in sodium alginate-based edible coating solutions

The fishing industry produces waste such as viscera, which is an environmental problem for many countries. Obtaining protein from these wastes are useful for the food industry. In this study, the chemical composition, amino acid profile, solubility, digestibility and thermal properties of Yamú protein isolate (PI) and its hydrolysates obtained by enzymatic hydrolysis were characterized. The hydrolysates (0.05, 0.1, 0.5, 1 and 2% w/v) were mixed with a sodium alginate-based solution to form an edible coating solution (ECS). Antioxidant capacity antimicrobial activity, Zeta potential (ζ) and adsorption kinetics properties were determined. PI contains 88% (w/w) protein showing better solubility, digestibility and thermal stability properties. The hydrolysate concentrations with DPPH inhibitory ECS were 0.1 and 0.5% (w/v). The kinetic properties of ECS showed good stability and excellent adsorption. These results suggest that this Yamú protein has high nutritional potential as an ingredient for the production of functional foods.

Recycling of food waste to produce chicken feed and liquid fertiliser

Most of the food waste (FW) generated by commercial activities and the majority of household FW is collected as part of general waste, which is either incinerated or landfilled. There is an increasing interest in the collection of FW as a separate waste stream and use it for the production of compost or recovery of energy through anaerobic digestion (AD) or pyrolysis. This study focused on using FW to produce chicken feed and liquid fertiliser (CFLF). The food waste samples were collected from food related businesses such as service club, café, restaurant, bakery and supermarket. The CFLF process was used to produce chicken feed pellets containing 19% of protein content, which is within the range of 16 to 22% of most commercial chicken feed pellets and within the National Research Council (NRC) recommended range of 15 to 23%. The liquid extract derived from CFLF process had high nutrient concentrations similar to those present in the feed solution used in hydroponic systems. Hence, the liquid extract from CFLF can be used to replace the commercial liquid fertiliser used in hydroponic systems. Environmental impact analysis of CFLF process using GaBi life cycle analysis (LCA) software indicated that the CFLF process can yield environmental credits for 15 out of 19 categories of impacts considered in the analysis. The measured environmental credits were significantly higher than the other disposal options such as, anaerobic digestion (AD), incineration and landfill.

Valorization of Seafood Processing Discards: Bioconversion and Bio-Refinery Approaches

The seafood industry generates large volumes of waste. These include processing discards consisting of shell, head, bones intestine, fin, skin, voluminous amounts of wastewater discharged as effluents, and low-value under-utilized fish, which are caught as by-catch of commercial fishing operations. The discards, effluents, and by-catch are rich in nutrients including proteins, amino acids, lipids containing good proportions of polyunsaturated fatty acids (PUFA), carotenoids, and minerals. The seafood waste is, therefore, responsible for loss of nutrients and serious environmental hazards. It is important that the waste is subjected to secondary processing and valorization to address the problems. Although chemical processes are available for waste treatment, most of these processes have inherent weaknesses. Biological treatments, however, are environmentally friendly, safe, and cost-effective. Biological treatments are based on bioconversion processes, which help with the recovery of valuable ingredients from by-catch, processing discards, and effluents, without losing their inherent bioactivities. Major bioconversion processes make use of microbial fermentations or actions of exogenously added enzymes on the waste components. Recent developments in algal biotechnology offer novel processes for biotransformation of nutrients as single cell proteins, which can be used as feedstock for the recovery of valuable ingredients and also biofuel. Bioconversion options in conjunction with a bio-refinery approach have potential for eco-friendly and economical management of seafood waste that can support sustainable seafood production.

Omega-3-Rich Oils from Marine Side Streams and Their Potential Application in Food

Rapid population growth and increasing food demand have impacts on the environment due to the generation of residues, which could be managed using sustainable solutions such as the circular economy strategy (waste generated during food processing must be kept within the food chain). Reusing discarded fish remains is part of this management strategy, since they contain high-value ingredients and bioactive compounds that can be used for the development of nutraceuticals and functional foods. Fish side streams such as the head, liver, or skin or the cephalothorax, carapace, and tail from shellfish are important sources of oils rich in omega-3. In order to resolve the disadvantages associated with conventional methods, novel extraction techniques are being optimized to improve the quality and the oxidative stability of these high-value oils. Positive effects on cardiovascular and vision health, diabetes, cancer, anti-inflammatory and neuroprotective properties, and immune system improvement are among their recognized properties. Their incorporation into different model systems could contribute to the development of functional foods, with market benefits for consumers. These products improve the nutritional needs of specific population groups in a scenario where noncommunicable diseases and pandemic crises are responsible for several deaths worldwide.

Active biopackaging produced from by-products and waste from food and marine industries

The agro-food industry cannot today do without packaging to preserve and above all market its products. Plastic materials coming mainly from petrochemicals have taken a predominant place in the food packaging sector. They have become indispensable in many sectors, from fresh to frozen products, from meat and dairy products to fruit and vegetables or almost-ready meals. Plastics are cheap, their lightness reduces transport costs, and their convenience is fundamental for out-of-home catering. However, plastics pose serious end-of-life issues. The development of materials that are more respectful of the consumer and the environment has become a major issue. In addition, the agro-food industries generate significant quantities of waste or by-products that are poorly or not at all recovered. However, these contain constituents that can be extracted or transformed to be compatible with packaging uses. Many molecules from waste materials are of particular interest for the development of active packaging such as biopolymers, bioactive agents, inorganic compounds, fibers, or nano- and micro-objects. Providing bioactive functions such as antioxidants or antimicrobials can extend the shelf life of food while reducing the sophistication of plastic materials and thus improving their recycling. This article summarizes the main materials and constituents that can be recovered from waste and illustrates through several examples what could be the applications of such new, sustainable, and active packaging.

Development and Sensory Evaluation of Omega-3-Rich Nile Perch Fish Oil-Fortified Yogurt

Nile perch (Lates niloticus) is a major fish species in East Africa and its processing produces sufficient amounts of by-products containing significant amounts of long-chain polyunsaturated fatty acids (PUFAs). Due to the health benefits associated with PUFAs, they can be incorporated into commonly consumed foods such as yoghurt. This study is aimed at developing an omega-3-rich functional yoghurt and evaluating its quality and acceptability. Omega-3-rich fish oils were obtained from Nile perch fat pads in the presence and absence of a commercial food grade enzyme Alcalase. Recovery of omega-3-rich fish oil was done by centrifugation at 1000 × g at room temperature. The peroxide value (PV), anisidine value (AV), total oxidation (TOTOX), and free fatty acids (FFA) were some of the quality parameters investigated. Natural yoghurt (150 ml) was prepared and spiked with 3.5 g of omega-3-rich Nile perch oil. To mask the fishy flavor and taste, four different flavors were used and sensory evaluation of the yoghurt samples was performed. The liberation of Nile perch fish oil in the absence of Alcalase gave better yield (60.7% wet weight), while the use of Alcalase gave lower yields (48.3% wet weight). Assessment of the quality of the extracted fish oils showed that all parameters were within the required limits. Sensory characterization by a panel of students showed that passion and strawberry flavors were the most liked with mean values of 4.65 and 4.625, respectively. This study revealed that substantial amounts of omega-3-rich fish oil can be extracted from Nile perch fish pads in the absence of exogenous enzymes. Fortification of yoghurt with omega-3-rich Nile perch fish oils is an approach towards increasing omega-3 intake within the Kenyan population and globally.

Towards the Anchovy Biorefinery: Biogas Production from Anchovy Processing Waste after Fish Oil Extraction with Biobased Limonene

Anchovies are among the largest fish catch worldwide. The anchovy fillet industry generates a huge amount of biowaste (e.g., fish heads, bones, tails) that can be used for the extraction of several potentially valuable bioproducts including omega-3 lipids. Following the extraction of valued fish oil rich in omega-3, vitamin D3 and zeaxanthin from anchovy fillet leftovers using biobased limonene in a fully circular process, the solid residue (anchovy sludge) was used as starting substrate for the production of biogas by anaerobic digestion. In spite of the unbalanced carbon to nitrogen (C/N) ratio, typical of marine biowaste, the anchovy sludge showed a good methane yield (about 280 mLCH4·gVS−1), proving to be an ideal substrate for co-digestion along with other carbon rich wastes and residues. Furthermore, the presence of residual limonene, used as a renewable, not-toxic and edible extraction solvent, does not affect the microbial methanogenesis. The results reported in this study demonstrate that anchovy leftovers after the fish oil extraction process can be efficiently used as a starting co-substrate for the production of biogas in a modern biorefinery.

Identification of high-value generating molecules from the wastes of tuna fishery industry by liquid chromatography and gas chromatography hyphenated techniques with automated sample preparation

The present work aims to a promising re-utilization of the massive waste derived from the tuna fishing industry, for which by-products can represent more than 50% of the original material. Due to the considerable content in polyunsaturated fatty acids and noble proteins, such wastes can be used as primary source of functional ingredients in the production of nutraceuticals. The composition of the lipid and protein tuna fractions was investigated by means of gas chromatography-mass spectrometry and high-performance liquid chromatography-tandem mass spectrometry methods (in wastes and edible parts), and a preliminary characterization of potential bioactive peptides was achieved. Automated sample preparation allowed speeding up the analytical workflow, while allowing for highly sensitive and selective lipid characterization. The ω3 fatty acid content was found higher in waste products compared to the muscle, in terms of fatty acids as well as complex lipids. As for peptides, extraction by isoelectric solubilization/precipitation was performed, followed by enzymatic digestion and high-performance liquid chromatography-tandem mass spectrometry analysis. Furthermore, the use of bioinformatics tools highlighted the presence of potential antimicrobial peptides in the samples investigated.

Potential Development of Sustainable 3D-Printed Meat Analogues: A Review

To mitigate the threat of climate change driven by livestock meat production, a multifaceted approach that incorporates dietary changes, innovative product development, advances in technologies, and reductions in food wastes/losses is proposed. The emerging technology of 3D printing (3DP) has been recognized for its unprecedented capacity to fabricate food products with intricate structures and reduced material cost and energy. For sustainable 3DP of meat substitutes, the possible materials discussed are derived from in vitro cell culture, meat byproducts/waste, insects, and plants. These material-based approaches are analyzed from their potential environmental effects, technological viability, and consumer acceptance standpoints. Although skeletal muscles and skin are bioprinted for medical applications, they could be utilized as meat without the additional printing of vascular networks. The impediments to bioprinting of meat are lack of food-safe substrates/materials, cost-effectiveness, and scalability. The sustainability of bioprinting could be enhanced by the utilization of generic/universal components or scaffolds and optimization of cell sourcing and fabrication logistics. Despite the availability of several plants and their byproducts and some start-up ventures attempting to fabricate food products, 3D printing of meat analogues remains a challenge. From various insects, powders, proteins (soluble/insoluble), lipids, and fibers are produced, which—in different combinations and at optimal concentrations—can potentially result in superior meat substitutes. Valuable materials derived from meat byproducts/wastes using low energy methods could reduce waste production and offset some greenhouse gas (GHG) emissions. Apart from printer innovations (speed, precision, and productivity), rational structure of supply chain and optimization of material flow and logistic costs can improve the sustainability of 3D printing. Irrespective of the materials used, perception-related challenges exist for 3D-printed food products. Consumer acceptance could be a significant challenge that could hinder the success of 3D-printed meat analogs.

Fishery Wastes as a Yet Undiscovered Treasure from the Sea: Biomolecules Sources, Extraction Methods and Valorization

The search for new biological sources of commercial value is a major goal for the sustainable management of natural resources. The huge amount of fishery by-catch or processing by-products continuously produced needs to be managed to avoid environmental problems and keep resource sustainability. Fishery by-products can represent an interesting source of high added value bioactive compounds, such as proteins, carbohydrates, collagen, polyunsaturated fatty acids, chitin, polyphenolic constituents, carotenoids, vitamins, alkaloids, tocopherols, tocotrienols, toxins; nevertheless, their biotechnological potential is still largely underutilized. Depending on their structural and functional characteristics, marine-derived biomolecules can find several applications in food industry, agriculture, biotechnological (chemical, industrial or environmental) fields. Fish internal organs are a rich and underexplored source of bioactive compounds; the fish gut microbiota biosynthesizes essential or short-chain fatty acids, vitamins, minerals or enzymes and is also a source of probiotic candidates, in turn producing bioactive compounds with antibiotic and biosurfactant/bioemulsifier activities. Chemical, enzymatic and/or microbial processing of fishery by-catch or processing by-products allows the production of different valuable bioactive compounds; to date, however, the lack of cost-effective extraction strategies so far has prevented their exploitation on a large scale. Standardization and optimization of extraction procedures are urgently required, as processing conditions can affect the qualitative and quantitative properties of these biomolecules. Valorization routes for such raw materials can provide a great additional value for companies involved in the field of bioprospecting. The present review aims at collecting current knowledge on fishery by-catch or by-products, exploring the valorization of their active biomolecules, in application of the circular economy paradigm applied to the fishery field. It will address specific issues from a biorefinery perspective: (i) fish tissues and organs as potential sources of metabolites, antibiotics and probiotics; (ii) screening for bioactive compounds; (iii) extraction processes and innovative technologies for purification and chemical characterization; (iv) energy production technologies for the exhausted biomass. We provide a general perspective on the techno-economic feasibility and the environmental footprint of the production process, as well as on the definition of legal constraints for the new products production and commercial use.

Sustainable Management of Secondary Raw Materials from the Marine Food-Chain: A Case-Study Perspective

The feasibility of exploiting secondary raw materials from marine food-chains as a source of molecules of nutritional interest, to create high-value food products and to meet nutritional challenges, is described in this report. A reduction in food waste is urgent as many sectors of the food industry damage the environment by depleting resources and by generating waste that must be treated. The project herein described, deals with the recovery of natural molecules, omega-3 fatty acids (EPA, DHA) and of α-tocopherol, from fish processing by-products. This would promote the sustainable development of new food products for human nutrition, as well as nutraceuticals. The growing awareness of increasing omega-3 fatty acids intake, has focused attention on the importance of fish as a natural source of these molecules in the diet. Therefore, a study on the concentration of these bioactive compounds in such matrices, as well as new green methodologies for their recovery, are necessary. This would represent an example of a circular economy process applied to the seafood value chain. Fish processing by-products, so far considered as waste, can hopefully be reutilized as active ingredients into food products of high added-value, thus maximizing the sustainability of fish production.