Applications of capillary electrophoresis in forensic analytical chemistry

Advancements in portable instruments based on affinity-capture-migration and affinity-capture-separation for use in clinical testing and life science applications

The shift from testing at centralized diagnostic laboratories to remote locations is being driven by the development of point-of-care (POC) instruments and represents a transformative moment in medicine. POC instruments address the need for rapid results that can inform faster therapeutic decisions and interventions. These instruments are especially valuable in the field, such as in an ambulance, or in remote and rural locations. The development of telehealth, enabled by advancements in digital technologies like smartphones and cloud computing, is also aiding in this evolution, allowing medical professionals to provide care remotely, potentially reducing healthcare costs and improving patient longevity. One notable POC device is the lateral flow immunoassay (LFIA), which played a major role in addressing the COVID-19 pandemic due to its ease of use, rapid analysis time, and low cost. However, LFIA tests exhibit relatively low analytical sensitivity and provide semi-quantitative information, indicating either a positive, negative, or inconclusive result, which can be attributed to its one-dimensional format. Immunoaffinity capillary electrophoresis (IACE), on the other hand, offers a two-dimensional format that includes an affinity-capture step of one or more matrix constituents followed by release and electrophoretic separation. The method provides greater analytical sensitivity, and quantitative information, thereby reducing the rate of false positives, false negatives, and inconclusive results. Combining LFIA and IACE technologies can thus provide an effective and economical solution for screening, confirming results, and monitoring patient progress, representing a key strategy in advancing diagnostics in healthcare.

Applications of Direct Injection Soft Chemical Ionisation-Mass Spectrometry for the Detection of Pre-blast Smokeless Powder Organic Additives

Analysis of smokeless powders is of interest from forensics and security perspectives. This article reports the detection of smokeless powder organic additives (in their pre-detonation condition), namely the stabiliser diphenylamine and its derivatives 2-nitrodiphenylamine and 4-nitrodiphenylamine, and the additives (used both as stabilisers and plasticisers) methyl centralite and ethyl centralite, by means of swab sampling followed by thermal desorption and direct injection soft chemical ionisation-mass spectrometry. Investigations on the product ions resulting from the reactions of the reagent ions H₃O⁺ and O₂⁺ with additives as a function of reduced electric field are reported. The method was comprehensively evaluated in terms of linearity, sensitivity and precision. For H₃O⁺, the limits of detection (LoD) are in the range of 41-88 pg of additive, for which the accuracy varied between 1.5 and 3.2%, precision varied between 3.7 and 7.3% and linearity showed R² ≥ 0.9991. For O₂⁺, LoD are in the range of 72 to 1.4 ng, with an accuracy of between 2.8 and 4.9% and a precision between 4.5 and 8.6% and R² ≥ 0.9914. The validated methodology was applied to the analysis of commercial pre-blast gun powders from different manufacturers. Graphical Abstract.

Coupling of capillary electrophoresis with electrospray ionization multiplexing ion mobility spectrometry

In this work, ion mobility spectrometry (IMS) function as a detector and another dimension of separation was coupled with CE to achieve two-dimensional separation. To improve the performance of hyphenated CE-IMS instrument, electrospray ionization correlation ion mobility spectrometry is evaluated and compared with traditional signal averaging data acquisition method using tetraalkylammonium bromide compounds. The effect of various parameters on the separation including sample introduction, sheath fluid of CE and drift gas, data acquisition method of IMS were investigated. The experimental result shows that the optimal conditions are as follows: hydrodynamic sample injection method, the electrophoresis voltage is 10 kilo volts, 5 mmol/L ammonium acetate buffer solution containing 80% acetonitrile as both the background electrolyte and the electrospray ionization sheath fluid, the ESI liquid flow rate is 4.5 μL/min, the drift voltage is 10.5 kilo volts, the drift gas temperature is 383 K and the drift gas flow rate is 300 mL/min. Under the above conditions, the mixture standards of seven tetraalkylammoniums can be completely separated within 10 min both by CE and IMS. The linear range was 5-250 μg/mL, with LOD of 0.152, 0.204, 0.277, 0.382, 0.466, 0.623 and 0.892 μg/mL, respectively. Compared with traditional capillary electrophoresis detection methods, the developed CE-ESI-IMS method not only provide two sets of qualitative parameters including electrophoresis migration time and ion drift time, ion mobility spectrometer can also provide an additional dimension of separation and could apply to the detection ultra-violet transparent compounds or none fluorescent compounds.

An overview on forensic analysis devoted to analytical chemists

The present article has as main aim to show analytical chemists interested in forensic analysis the world they will face if decision in favor of being a forensic analytical chemist is adopted. With this purpose, the most outstanding aspects of forensic analysis in dealing with sampling (involving both bodily and no bodily samples), sample preparation, and analytical equipment used in detection, identification and quantitation of key sample components are critically discussed. The role of the great omics in forensic analysis, and the growing role of the youngest of the great omics -metabolomics- are also discussed. The foreseeable role of integrative omics is also outlined.

Dual-opposite injection capillary electrophoresis: Principles and misconceptions

Dual-opposite injection capillary electrophoresis (DOI-CE) is a separation technique that utilizes both ends of the capillary for sample introduction. The electroosmotic flow (EOF) is suppressed to allow all ions to reach the detector quickly. Depending on the individual electrophoretic mobilities of the analytes of interest and the effective length that each analyte travels to the detection window, the elution order of analytes in a DOI-CE separation can vary widely. This review discusses the principles, applications, and limitations of dual-opposite injection capillary electrophoresis. Common misconceptions regarding DOI-CE are clarified.

Long-term analyses in automated electrophoretic analyzer in hydrodynamically closed separation system

Some potential problems that can occur during the analyses of complex samples by on-line combination of capillary isotachophoresis-capillary zone electrophoresis (cITP-CZE) in automated electrophoretic analyzer with the column-coupling configuration of the separation unit were studied in this work. The main focus was devoted on the reproducibility of important analytes' parameters (migration time, peak height and peak area) and also on the stability studies of selected low and high molecular mass analytes of inorganic/organic origins (bromate, vitamins, proteins) present at low concentration levels in different kinds of matrices (mineral water, human urine). Such study was carried out for the first time for the electrophoretic analyzer operating in the hydrodynamically closed separation system provided with contact-less conductivity detectors and UV detector in CZE step. Hydrodynamic and electroosmotic flows of the buffer solutions were suppressed and therefore, only the electrophoretic transport of ions was significant. Obtained results showed the different stabilities of the analytes and samples depending on their origin. The focus in the long-term analyses should be paid on the storage of the samples and on the regular changing the contents of electrolyte vessels to keep the electrolyte composition and separation conditions as constant as possible.

Detection limit enhancement of antiarrhythmic drugs in human plasma using capillary electrophoresis with dispersive liquid–liquid microextraction and field-amplified sample stacking method

Background: A new capillary zone electrophoresis (CZE) with ultraviolet detection method has been developed and validated for the analysis of four antiarrhythmic drugs in human plasma samples. Methods: In this study, a dispersive liquid–liquid microextraction (DLLME) coupled with field-amplified sample stacking (FASS) was employed for biological samples clean-up and sensitivity enhancement in CZE. Results: Under optimum DLLME-FASS-CZE conditions, enhancement factors were in the range of 157–314. The method was validated over the concentration range of 20–800 ng/ml in human plasma. Inter- and intra-day precision and the accuracy were less than 20%; the detection limits ranged from 2.5 to 4.7 ng/ml. Furthermore, the validated method was successfully applied to the detection of studied drugs in patients’ plasma samples.

Electromigrative separation techniques in forensic science: combining selectivity, sensitivity, and robustness

In this review we introduce the advantages and limitations of electromigrative separation techniques in forensic toxicology. We thus present a summary of illustrative studies and our own experience in the field together with established methods from the German Federal Criminal Police Office rather than a complete survey. We focus on the analytical aspects of analytes' physicochemical characteristics (e.g. polarity, stereoisomers) and analytical challenges including matrix tolerance, separation from compounds present in large excess, sample volumes, and orthogonality. For these aspects we want to reveal the specific advantages over more traditional methods. Both detailed studies and profiling and screening studies are taken into account. Care was taken to nearly exclusively document well-validated methods outstanding for the analytical challenge discussed. Special attention was paid to aspects exclusive to electromigrative separation techniques, including the use of the mobility axis, the potential for on-site instrumentation, and the capillary format for immunoassays. The review concludes with an introductory guide to method development for different separation modes, presenting typical buffer systems as starting points for different analyte classes. The objective of this review is to provide an orientation for users in separation science considering using capillary electrophoresis in their laboratory in the future.

Analysis of questioned documents: a review

During the last years (2000-2014), many publications concerning the forensic analysis of questioned documents have been published, and new techniques and methodologies are nowadays employed to overcome forensic caseworks. This article reviews a comprehensive collection of the works focused on this issue, including dating studies, the analysis of inks from pens and printers, the analysis of paper, the analysis of other samples related to questioned documents and studies on intersecting lines. These sections highlight the most relevant analytical studies by a wide range of analytical techniques. Separation and spectrometric techniques are critically discussed and compared, emphasizing the advantages and disadvantages of each one. Finally, concluding remarks on the research published are included.

Nanomanipulation-coupled to nanospray mass spectrometry applied to document and ink analysis

A method for the extraction and analysis of ink samples was developed using microscopy with direct analyte probe nanoextraction coupled to nanospray ionization mass spectrometry (DAPNe-NSI-MS) for localized chemical analysis of document inks. Nanomanipulation can be effectively coupled to nanospray ionization mass spectrometry providing picomolar sensitivity, and the capability to analyze ultra-trace amounts of material and reduce the required sample volume to as low as 300 nL. This new and innovative technique does not leave destructive footprints on the surface of a document. To demonstrate the breadth of this technique, analysis of inks from various eras were tested, iron gall ink and modern inks, as well as the capability to detect the oxidative products of polyethylene glycol (PEG), a common binding agent. The experimental results showed that DAPNe-NSI-MS was able to chelate iron(II) and manganese(II) ions of iron gall ink and organic components of modern and carbon-based inks. Regardless of whether the ink composition is modern or ancient, organic or inorganic, this new instrumental approach is able to identify and characterize the ingredients by modifying the extraction solvent, illustrating the potential diversity of the DAPNe technique.

Detection of trace ink compounds in erased handwritings using electrospray-assisted laser desorption ionization mass spectrometry

Writings made with erasable pens on paper surfaces can either be rubbed off with an eraser or rendered invisible by changing the temperature of the ink. However, trace ink compounds still remain in the paper fibers even after rubbing or rendering. The detection of these ink compounds from erased handwritings will be helpful in knowing the written history of the paper. In this study, electrospray-assisted laser desorption ionization/mass spectrometry was used to characterize trace ink compounds remaining in visible and invisible ink lines. The ink compounds were desorbed from the paper surface by irradiating the handwritings with a pulsed laser beam; the desorbed analytes were subsequently ionized in an electrospray plume and detected by a quadrupole time-of-flight mass spectrometry mass analyzer. Because of the high spatial resolution of the laser beam, electrospray-assisted laser desorption ionization/mass spectrometry analysis resulted in minimal damage to the sample documents.

The application of capillary electrophoresis techniques in toxicological analysis

Capillary electrophoresis (CE) comprises a group of techniques used to separate chemical mixtures. Analytical separation is based on different electrophoretic mobilities, thereby allowing qualitative and quantitative evaluations to be made. The application of CE in medical science, especially in toxicological studies, is developing rapidly because of the short time required for analysis and its high sensitivity, selectivity and ability to determine substances of an acidic, alkaline and neutral character. This review focuses on the possibility of applying CE in toxicological analysis. Advances in different CE analyses and detection techniques connected with this method are described.

Recent advances of ionic liquids and polymeric ionic liquids in capillary electrophoresis and capillary electrochromatography

Ionic liquids (ILs) and polymeric ionic liquids (PILs) with unique and fascinating properties have drawn considerable interest for their use in separation science, especially in chromatographic techniques. In this article, significant contributions of ILs and PILs in the improvement of capillary electrophoresis and capillary electrochromatography are described, and a specific overview of the most relevant examples of their applications in the last five years is also given. Accordingly, some general conclusions and future perspectives in these areas are discussed.

Screening of inorganic gases released from firework-rockets by a gas chromatography/whistle-accelerometer method

The use of an accelerometer for detecting inorganic gases in gas chromatography (GC) is described. A milli-whistle was connected to the outlet of the GC capillary and was used instead of a classical GC detector. When the GC carrier gases and the sample gases pass through the milli-whistle, a sound is produced, leading to vibrational changes, which can be recorded using an accelerometer. Inorganic gases, including SO2, N2 and CO2, which are released from traditional Chinese firework-rockets at relatively high levels as the result of burning the propellant and explosive material inside could be rapidly determined using the GC/whistle-accelerometer system. The method described herein is safe, the instrumentation is compact and has potential to be modified so as to be portable for use in the field. It also can be used in conjunction with FID (flame ionization detector) or TCD (thermal conductivity detector), in which either no response for FID (CO2, N2, NO2, SO2, etc.) or helium gas is needed for TCD, respectively.

Dispersive liquid-liquid microextraction prior to field-amplified sample injection for the sensitive analysis of 3,4-methylenedioxymethamphetamine, phencyclidine and lysergic acid diethylamide by capillary electrophoresis in human urine

A novel capillary zone electrophoresis (CZE) with ultraviolet detection method has been developed and validated for the analysis of 3,4-methylenedioxymethamphetamine (MDMA), lysergic acid diethylamide (LSD) and phencyclidine (PCP) in human urine. The separation of these three analytes has been achieved in less than 8 min in a 72-cm effective length capillary with 50-μm internal diameter. 100 mM NaH(2)PO(4)/Na(2)HPO(4), pH 6.0 has been employed as running buffer, and the separation has been carried out at temperature and voltage of 20°C, and 25kV, respectively. The three drugs have been detected at 205 nm. Field amplified sample injection (FASI) has been employed for on-line sample preconcentration. FASI basically consists in a mismatch between the electric conductivity of the sample and that of the running buffer and it is achieved by electrokinetically injecting the sample diluted in a solvent of lower conductivity than that of the carrier electrolyte. Ultrapure water resulted to be the better sample solvent to reach the greatest enhancement factor. Injection voltage and time have been optimized to 5 kV and 20s, respectively. The irreproducibility associated to electrokinetic injection has been correcting by using tetracaine as internal standard. Dispersive liquid-liquid microextraction (DLLME) has been employed as sample treatment using experimental design and response surface methodology for the optimization of critical variables. Linear responses were found for MDMA, PCP and LSD in presence of urine matrix between 10.0 and 100 ng/mL approximately, and LODs of 1.00, 4.50, and 4.40 ng/mL were calculated for MDMA, PCP and LSD, respectively. The method has been successfully applied to the analysis of the three drugs of interest in human urine with satisfactory recovery percentages.

Forensic chemistry

Forensic chemistry is unique among chemical sciences in that its research, practice, and presentation must meet the needs of both the scientific and the legal communities. As such, forensic chemistry research is applied and derivative by nature and design, and it emphasizes metrology (the science of measurement) and validation. Forensic chemistry has moved away from its analytical roots and is incorporating a broader spectrum of chemical sciences. Existing forensic practices are being revisited as the purview of forensic chemistry extends outward from drug analysis and toxicology into such diverse areas as combustion chemistry, materials science, and pattern evidence.