Analysis of biopharmaceutical proteins in biological matrices by LC-MS/MS I. Sample preparation

A liquid chromatography - Tandem mass spectrometry method for determination of ocrelizumab in serum of patients with multiple sclerosis

Ocrelizumab is a second generation recombinant humanized IgG1 monoclonal antibody used for the treatment of multiple sclerosis that selectively target B cells expressing the CD20 antigen. This study aimed to develop and validate a UPLC-MS/MS method for quantification of ocrelizumab in human serum, which can be used in clinical applications for therapeutic drug monitoring. The analysis of ocrelizumab was performed using a bottom-up approach on a liquid chromatography coupled to tandem mass spectrometry detection. The method involved immunoglobulin precipitation with cold methanol followed by peptide digestion with trypsin. The resulting specific peptides were separated on an Acquity UPLC BEH C18 column at 55 °C using gradient elution. The method was validated according to European Medicines Agency (EMEA) guidelines and demonstrated intra- and inter-assay precision with coefficients of variation ranging from 1.6 % to 6.1 % and accuracies between 90.2 % and 107.2 %. Stability testing, including autosampler, long-term and freeze-thaw stability, showed no more than 15 % variation. The method was successfully applied to 169 patient samples, revealing ocrelizumab concentrations ranging from 0.5 to 21.8 mg/L in patients on 6-month dosing regimen and 20.5-65.0 mg/L in 16 patients receiving an initial two-week dose of 300 mg. The newly developed UPLC-MS/MS method met all criteria for accuracy, precision and stability, confirming its suitability for clinical use in monitoring ocrelizumab levels in multiple sclerosis patients.

A generic sample preparation method for the multiplex analysis of seven therapeutic monoclonal antibodies in human plasma or serum with liquid chromatography-tandem mass spectrometry

Due to the increasing number of therapeutic monoclonal antibodies (mAbs) used in the clinic, there is an increasing need for robust analytical methods to quantify total mAb concentrations in human plasma for clinical studies and therapeutic drug monitoring. We developed an easy, rapid, and robust sample preparation method for liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. The method was validated for infliximab (IFX), rituximab (RTX), cetuximab (CTX), dupilumab (DPL), dinutuximab (DNX), vedolizumab (VDZ), and emicizumab (EMZ). Saturated ammonium sulfate (AS) was used to precipitate immunoglobulins in human plasma. After centrifugation, supernatant containing albumin was decanted, and the precipitated immunoglobulin fraction was re-dissolved in buffer containing 6M guanidine. This fraction was then completely denatured, reduced, alkylated, and trypsin digested. Finally, signature peptides from the seven mAbs were simultaneously quantified on LC-MS/MS together with their internal standards stable isotopically labeled peptide counterparts. The linear dynamic ranges (1 - 512 mg/L) of IFX, CTX, RTX, and EMZ showed excellent (R2 > 0.999) linearity and those of DPL, DNX, and VDZ showed good (R2 > 0.995) linearity. The method was validated in accordance with the EMA guidelines. EDTA plasma, sodium citrate plasma, heparin plasma, and serum yielded similar results. Prepared samples were stable at room temperature (20°C) and at 5°C for 3 days, and showed no decline in concentration for all tested mAbs. This described method, which has the advantage of an easy, rapid, and robust pre-analytical sample preparation, can be used as a template to quantify other mAbs in human plasma or serum.

A simple and rapid LC-MS/MS and CE-MS/MS analytical strategy for the determination of therapeutic peptides in modern immunotherapeutics and biopharmaceutics

Modern therapy of metabolic, neurodegenerative, inflammation, or cancer diseases is recently based on an immunotherapeutic approach. The peptide conjugates represent innovative and effective therapeutics that are better tolerated and are much more specific than small molecule-based medicines. The nature and manufacturing process of these therapeutics make their analysis very challenging. Here, two robust analytical methods based on an on-line combination of ultra-high-performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS) and capillary electrophoresis with tandem mass spectrometry (CE-MS/MS) were developed for fast determination of immunogenic synthetic peptide (peptide sequence CADNLHKVVGQST) in a conjugate with bovine serum albumin (BSA) as a carrier protein and is a peptide, conjugate formulated with a vaccine adjuvant - Alhydrogel® 2 %. An effective non-enzymatic release step of the peptide from the final peptide conjugate based on acid hydrolysis with the use of 2% formic acid was successfully tested and implemented. The proposed methods were validated according to the ICH guideline and parameters such as linearity, precision, and accuracy, the limit of detection (LOD) or limit of quantification (LOQ) were assessed. Calibration curves were linear within the range of 1-30 μg.mL^-1 and the correlation coefficients were higher than 0.99. The intraday and interday precisions were 3.2-8.1 % (UHPLC-MS/MS), 1.6-9.3 % (CE-MS/MS) and 3.6-10.3 % (UHPLC-MS/MS), 4.1-10.2 % (CE-MS/MS), respectively. The recovery ranged in the interval of 98.4-107.4 % for UHPLC-MS/MS method and 100.3-103.2 % for CE-MS/MS method. The presented approaches represent an effective tool for simple, rapid and robust quantification of immunogens in modern immunotherapeutics and other biopharmaceuticals with appropriate peptide sequences.

Effect of difluoroacetic acid and biological matrices on the development of a liquid chromatography-triple quadrupole mass spectrometry method for determination of intact growth factor proteins

In biological systems, variable protein expression is a crucial marker for numerous diseases, including cancer. The vast majority of liquid chromatography-triple quadrupole mass spectrometry-based quantitative protein assays use bottom-up methodologies, where proteins are subjected to proteolytic cleavage prior to analysis. Here, the effect of difluoroacetic acid and biological matrices on the developement of a multiple reaction monitoring based top-down reversed-phase liquid chromatography-triple quadrupole mass spectrometry method for analysis of cancer-related intact proteins was evaluated. Seven growth factors (5.5-26.5 kDa; isoelectric points: 4.6-9.9) were analyzed on a wide-pore C4 column. The optimized method was performed at 30°C, using a 0.2 mL/min flow rate, a 10 %B/min gradient slope, and 0.05% v/v difluoroacetic acid as a mobile phase modifier. The increase of mass spectrometry sensitivity due to the difluoroacetic acid (estimated limits of detection in biological matrices 1-500 ng/mL) significantly varied for proteins with lower and higher charge state distributions. Matrix effects, as well as the specificity of the method were assessed for variable biological samples and pretreatment methods. This work demonstrates method development to improve the ability to target intact proteins directly by more affordable triple quadrupole mass spectrometry instrumentation, which could be beneficial in many application fields.

Recent developments and emerging trends of mass spectrometric methods in plant hormone analysis: a review

Plant hormones are naturally occurring small molecule compounds which are present at trace amounts in plant. They play a pivotal role in the regulation of plant growth. The biological activity of plant hormones depends on their concentrations in the plant, thus, accurate determination of plant hormone is paramount. However, the complex plant matrix, wide polarity range and low concentration of plant hormones are the main hindrances to effective analyses of plant hormone even when state-of-the-art analytical techniques are employed. These factors substantially influence the accuracy of analytical results. So far, significant progress has been realized in the analysis of plant hormones, particularly in sample pretreatment techniques and mass spectrometric methods. This review describes the classic extraction and modern microextraction techniques used to analyze plant hormone. Advancements in solid phase microextraction (SPME) methods have been driven by the ever-increasing requirement for dynamic and in vivo identification of the spatial distribution of plant hormones in real-life plant samples, which would contribute greatly to the burgeoning field of plant hormone investigation. In this review, we describe advances in various aspects of mass spectrometry methods. Many fragmentation patterns are analyzed to provide the theoretical basis for the establishment of a mass spectral database for the analysis of plant hormones. We hope to provide a technical guide for further discovery of new plant hormones. More than 140 research studies on plant hormone published in the past decade are reviewed, with a particular emphasis on the recent advances in mass spectrometry and sample pretreatment techniques in the analysis of plant hormone. The potential progress for further research in plant hormones analysis is also highlighted.

Improving selectivity and sensitivity of protein quantitation by LC–HR–MS/MS: determination of somatropin in rat plasma

Aim: Protein quantitation by digestion of a biological sample followed by LC–MS analysis of a signature peptide can be a challenge because of the high complexity of the digested matrix. Results/methodology: The use of LC with high-resolution (quadrupole-TOF) MS detection allowed quantitation of the 22-kDa biopharmaceutical somatropin in 60 μl of rat plasma down to 25 ng/ml with minimal further sample treatment. Reducing the mass extraction window to 0.01 Da considerably decreased the interference of tryptic peptides, enhanced sensitivity and improved accuracy and precision. Analysis with LC–MS/MS resulted in a less favorable limit of quantitation of 100 ng/ml. Conclusion: HRMS is an interesting option for the quantitation of proteins after digestion and has the potential to improve sensitivity with minimal method development.

HPLC-MS/MS method optimisation for matrix metalloproteinase 3 and matrix metalloproteinase 9 determination in human blood serum using target analysis

A quantitative analysis of zinc endopeptidases matrix metalloproteinase 9 (MMP9) and matrix metalloproteinase 3 (MMP3) from human blood serum are presented. Both matrix metalloproteinases (MMP) are present in human blood serum and can be used as biomarkers for different diseases. The analysis was performed using LC-MS/MS with a triple quadrupole mass spectrometer, based on two specific peptides of each MMP in comparison with an enzyme-linked immunosorbent assay (ELISA). While the conditions for the LC-MS/MS analysis of MMP9 peptides were previously reported for bronchoalveolar lavage fluid, the analysis of MMP3 peptides was newly quantified for human blood serum herein for the first time. For MMP3, the linear behaviour was determined in the concentration range from 1.0-200.0ng/mL (R²=0.997) with an LLOD of 0.5ng/mL. For MMP9, linearity was determined in the concentration range from 6.5-65.0ng/mL (R²=0.995) with an LLOD of 2.0ng/mL.

The use of mass spectrometry to analyze dried blood spots

Dried blood spots (DBS) typically consist in the deposition of small volumes of capillary blood onto dedicated paper cards. Comparatively to whole blood or plasma samples, their benefits rely in the fact that sample collection is easier and that logistic aspects related to sample storage and shipment can be relatively limited, respectively, without the need of a refrigerator or dry ice. Originally, this approach has been developed in the sixties to support the analysis of phenylalanine for the detection of phenylketonuria in newborns using bacterial inhibition test. In the nineties tandem mass spectrometry was established as the detection technique for phenylalanine and tyrosine. DBS became rapidly recognized for their clinical value: they were widely implemented in pediatric settings with mass spectrometric detection, and were closely associated to the debut of newborn screening (NBS) programs, as a part of public health policies. Since then, sample collection on paper cards has been explored with various analytical techniques in other areas more or less successfully regarding large-scale applications. Moreover, in the last 5 years a regain of interest for DBS was observed and originated from the bioanalytical community to support drug development (e.g., PK studies) or therapeutic drug monitoring mainly. Those recent applications were essentially driven by improved sensitivity of triple quadrupole mass spectrometers. This review presents an overall view of all instrumental and methodological developments for DBS analysis with mass spectrometric detection, with and without separation techniques. A general introduction to DBS will describe their advantages and historical aspects of their emergence. A second section will focus on blood collection, with a strong emphasis on specific parameters that can impact quantitative analysis, including chromatographic effects, hematocrit effects, blood effects, and analyte stability. A third part of the review is dedicated to sample preparation and will consider off-line and on-line extractions; in particular, instrumental designs that have been developed so far for DBS extraction will be detailed. Flow injection analysis and applications will be discussed in section IV. The application of surface analysis mass spectrometry (DESI, paper spray, DART, APTDCI, MALDI, LDTD-APCI, and ICP) to DBS is described in section V, while applications based on separation techniques (e.g., liquid or gas chromatography) are presented in section VI. To conclude this review, the current status of DBS analysis is summarized, and future perspectives are provided.

Highly sensitive antibody-free μLC–MS/MS quantification of rhTRAIL in serum

Background: We describe an antibody-free approach to quantify rhTRAILWT (wild-type) and its closely related death receptor 4 selective variant rhTRAIL4C7 in human and murine serum by multiplex LC–MS/MS on a microfluidics interface. Methodology: Enrichment of rhTRAIL was performed by strong cation-exchange (SCX) followed by immobilized metal affinity (IMAC) solid-phase extraction. This was followed by trypsin digestion and using methionine-containing signature peptides after fully oxidizing the methionine residue with 0.25% (w/w) hydrogen peroxide. Conclusion: Absolute quantification was reaching down to 0.5 ng/ml for rhTRAILWT (8.5 pM) and 2 ng/ml for rhTRAIL4C7 (34 pM) in 100 μl human serum. To support preclinical studies in mice, the analysis was optimized further, for a sample volume of 20 μl murine serum.

Antibody-free workflows for protein quantification by LC–MS/MS

Antibody-free approaches for quantitative LC–MS/MS-based protein bioanalysis are reviewed and critically evaluated, and compared with the more widely used immunoaffinity-based approaches. Antibody-free workflows will be divided into four groups and discussed in the following order: direct analysis of signature peptides after proteolytic digestion; enrichment of target proteins and signature peptides by fractionated protein precipitation; enrichment of target proteins and signature peptides by reversed-phase and ion-exchange solid-phase extraction; and enrichment of target proteins and signature peptides by (antibody-free) affinity-solid-phase extraction.

Advances in high-resolution accurate mass spectrometry application to targeted proteomics

Targeted quantitative proteomic analyses aim at systematically measuring the abundance of proteins in large sets of samples, without biases or missing values. One typical implementation is the verification of biomarker candidates in bodily fluids, which measures extended lists of validated transitions using triple quadrupole instruments in selected reaction monitoring (SRM) mode. However, the selectivity of this mass spectrometer is limited by the resolving power of its mass analyzers, and interferences may require the reanalysis of the samples. Despite the efforts undertaken in the development of software, and resources to design SRM studies, and to analyze and validate the data, the process remains tedious and time consuming. The development of fast scanning high-resolution and accurate mass (HRAM) spectrometers, such as the quadrupole TOF and the quadrupole orbitrap instruments, offers alternatives for targeted analyses. The selectivity of HRAM measurements in complex samples is greatly improved by effectively separating co-eluting interferences. The fragment ion chromatograms are extracted from the high-resolution MS/MS data using a narrow mass tolerance. The entire process is straightforward as the selection of fragment ions is performed postacquisition. This account describes the different HRAM techniques and discusses their advantages and limitations in the context of targeted proteomic analyses.

High-sensitivity quantitation of a Nanobody® in plasma by single-cartridge multidimensional SPE and ultra-performance LC–MS/MS

Background: A major challenge in protein quantitation based on enzymatic digestion of complex biological samples and subsequent LC–MS/MS analysis of a signature peptide is dealing with the high complexity of the matrix after digestion, which can reduce sensitivity considerably. Results: Using single cartridge multidimensional SPE, sufficient selectivity was introduced to allow quantitation in 50 µl of plasma down to 10.0 ng/ml (˜0.3 nM). An inhouse prepared 18O-labeled signature peptide was used as the internal standard. The procedure was validated for human and rabbit plasma. Conclusion: The developed SPE procedure allowed the sensitive and selective LC–MS/MS quantitation of the Nanobody® without the use of antibodies. When appropriate precautions are taken, the 18O-labeled peptide is a practical and economical alternative to custom synthesis.

Quantification of human mAbs in mouse tissues using generic affinity enrichment procedures and LC–MS detection

Background: The disease state can modulate the penetration of large antibody-sized therapeutic molecules into affected tissues. Suitable bioanalytical methods are required for the quantitative analysis of drug tissue levels to enable a better understanding of the parameters influencing drug penetration and target engagement. Results: Described is a sensitive and selective LC–MS/MS assay for the quantification of human mAb molecules in mouse tissues. By homogenizing tissues directly into serum, a common serum calibration curve can be used for multiple tissues. A generic procedure was used for affinity enrichment. An analytical range of 20 – 20,000 ng/ml was achieved in serum. Conclusion: The method described here can be applied for the quantitative analysis of mAb and Fc-fusion therapeutic molecules in a variety of animal tissue matrices.

Application and challenges in using LC–MS assays for absolute quantitative analysis of therapeutic proteins in drug discovery

As more protein therapeutics enter the drug-discovery pipeline, the traditional ligand-binding assay (LBA) faces additional challenges to meet the rapid and diverse bioanalytical needs in the early drug-discovery stage. The high specificity and sensitivity afforded by LC–MS, along with its rapid method development, is proving invaluable for the analysis of protein therapeutics in support of drug discovery. LC–MS not only serves as a quantitative tool to complement LBA in drug discovery, it also provides structural details at a molecular level, which are used to address issues that cannot be resolved using LBA alone. This review will describe the key benefits and applications, as well as the techniques and challenges for applying LC–MS to support protein quantification in drug discovery.