Speciation of technologically critical elements in the environment using chromatography with element and molecule specific detection

Assessment of contamination, mobility and application of selected technology-critical elements as indicators of anthropogenic pollution of bottom sediments

The study investigates the potential of technology-critical elements (TCEs) in the bottom sediments of the Biała Przemsza River as indicators of anthropogenic activities. The mass fractions of TCEs: Ge, Ga, In, Tl, Sb and Te (and other elements) in the sediment were analysed by inductively coupled plasma mass spectrometry with the maximum mass fractions: 2.46, 25.6, 0.528, 27.7, 12.5 and 0.293 mg/kg, respectively. Distribution and identification of TCE sources were supported by statistical analysis (principal component analysis coupled with varimax rotation and hierarchical cluster analysis). Assessments of TCE contamination using the geoaccumulation index, pollution index, contamination factor, enrichment factor and the antimony-to-arsenic ratio highlighted the high contamination of bottom sediments by Sb, Ga, Tl, Cd, As, Zn, Pb and moderate contamination by Co, In and V. Distinct behaviour patterns were observed among TCEs, revealing Sb and Tl as potential indicators of Zn-Pb ore mining activities. Co, V, Ge and, to a lesser extent, Te emerged as promising indicators of coal and coal fly ash effluents. Sequential chemical extraction of TCEs showed that Sb, In and Tl had the highest mobility from sediments. The Risk Assessment Code calculations suggest, that in the Biała Przemsza River bottom sediments, there is an average risk of contamination by As, Tl and Mn. Soluble forms of Tl, Ge, Sb, Te and In were identified in descending order, indicating their bioavailability.

Simultaneous quantification of tin and lead species in Antarctic krill and fish by interfacing high-performance liquid chromatography with inductively coupled plasma mass spectrometry based on strong cation-exchange and Amphion columns

Tin and lead are a global concern considering their species-dependent toxicity, bioavailability and transformation. Simultaneous speciation analysis of tin and lead is challenging for a large food capacity containing unstable species. Herein, we developed two sensitive methods for rapid quantification of tin and lead species in Antarctic seafood by high-performance liquid chromatography and inductively coupled plasma mass spectrometry based on strong cation-exchange and Amphion columns. Inorganic tin and lead, four organotin and two organolead compounds can be analysed in 16 min on a 10-cm Amphion II column (mobile phase: 4 mM sodium dodecyl benzene sulfonate at pH 2.0) with 0.02-0.24 μg L-1 detection limits. The method was applied to Antarctic krill and fish, demonstrating the presence of any tin and lead species down to μg kg-1 level. Overall, the proposed methods are sensitive, efficient and environment-friendly for routine speciation analysis of tin and lead in food samples.

Accessing the environmental impact of tellurium metal

Tellurium is gaining technical significance because of being a vital constituent for the growth of green-energy products and technologies. Owing to its unique property of interchangeable oxidation states it has a tricky though interesting chemistry with basically unidentified environmental effects. The understanding of environmental actions of tellurium has significant gaps for instance, its existence and effects in various environmental sections related to mining, handling and removal and disposal methods. To bridge this gap it is required to assess its distinctive concentrations in the environment together with proper knowledge of its environmental chemistry. This in turn significantly requires developing systematic diagnostic schemes which are sensitive enough to present statistics in the concentrations which are environmentally relevant. The broad assessment of available statistics illustrates that tellurium is being found in a very scarce concentrations in various environmental sections. Very less information is available for the presence and effects of tellurium in air and natural water resources. Various soil and lake sediment analysis statistics indicate towards the presence of tellurium in soil owing to release of dust, ash and slag during mining and manufacturing practices. Computing the release and behavior of tellurium in environment needs a thorough assessment of its anthropogenic life cycle which in turn will facilitate information about its existing and prospective release in the environment, and will aid to handle the metal more sensibly.

Assessing the chemical anthropocene - Development of the legacy pollution fingerprint in the North Sea during the last century

The North Sea and its coastal zones are heavily impacted by anthropogenic activities, which has resulted in significant chemical pollution ever since the beginning of the industrialization in Europe during the 19th century. In order to assess the chemical Anthropocene, natural archives, such as sediment cores, can serve as a valuable data source to reconstruct historical emission trends and to verify the effectiveness of changing environmental legislation. In this study, we investigated 90 contaminants covering inorganic and organic pollutant groups analyzed in a set of sediment cores taken in the North Seas' main sedimentation area (Skagerrak). We thereby develop a chemical pollution fingerprint that records the constant input of pollutants over time and illustrates their continued great relevance for the present. Additionally, samples were radiometrically dated and PAH and PCB levels in porewater were determined using equilibrium passive sampling. Furthermore, we elucidated the origin of lead (Pb) contamination utilizing non-traditional stable isotopic analysis. Our results reveal three main findings: 1. for all organic contaminant groups covered (PAHs, OCPs, PCBs, PBDEs and PFASs) as well as the elements lead (Pb) and titanium (Ti), determined concentrations decreased towards more recent deposited sediment. These decreasing trends could be linked to the time of introductions of restrictions and bans and therefor our results confirm, amongst possible other factors, the effectiveness of environmental legislation by revealing a successive change in contamination levels over the decades. 2. concentration trends for ΣPAH and ΣPCB measured in porewater correspond well with the ones found in sediment which suggests that this method can be a useful expansion to traditional bulk sediment analysis to determine the biologically available pollutant fraction. 3. Arsenic (As) concentrations were higher in younger sediment layers, potentially caused by emissions of corroded warfare material disposed in the study area after WW II.

Elemental Speciation Analysis in Environmental Studies: Latest Trends and Ecological Impact

Speciation analysis is a key aspect of modern analytical chemistry, as the toxicity, environmental mobility, and bioavailability of elemental analytes are known to depend strongly on an element’s chemical species. Henceforth, great efforts have been made in recent years to develop methods that allow not only the determination of elements as a whole, but also each of its separate species. Environmental analytical chemistry has not ignored this trend, and this review aims to summarize the latest methods and techniques developed with this purpose. From the perspective of each relevant element and highlighting the importance of their speciation analysis, different sample treatment methods are introduced and described, with the spotlight on the use of modern nanomaterials and novel solvents in solid phase and liquid-liquid microextractions. In addition, an in-depth discussion of instrumental techniques aimed both at the separation and quantification of metal and metalloid species is presented, ranging from chromatographic separations to electro-chemical speciation analysis. Special emphasis is made throughout this work on the greenness of these developments, considering their alignment with the precepts of the Green Chemistry concept and critically reviewing their environmental impact.

Development of a Tellurium Speciation Study Using IC-ICP-MS on Soil Samples Taken from an Area Associated with the Storage, Processing, and Recovery of Electrowaste

The optimization and validation of a methodology for determining and extracting inorganic ionic Te(VI) and Te(IV) forms in easily-leached fractions of soil by Ion Chromatography-Inductively Coupled Plasma-Mass Spectrometry (IC-ICP-MS) were studied. In this paper, the total concentration of Te, pH, and red-ox potential were determined. Ions were successfully separated in 4 min on a Hamilton PRPX100 column with 0.002 mg/kg and 0.004 mg/kg limits of detection for Te(VI) and Te(IV), respectively. Soil samples were collected from areas subjected to the influence of an electrowaste processing and sorting plant. Sequential chemical extraction of soils showed that tellurium was bound mainly with sulphides, organic matter, and silicates. Optimization of soil extraction allowed 20% average extraction efficiency to be obtained, using 100 mM citric acid as the extractant. In the tested soil samples, both tellurium species were present. In most cases, the soils contained a reduced Te form, or the concentrations of both species were similar.

Germanium fractions in typical paddy soil and its interaction with humic substances

Ge and Si differ strongly in their biogeochemical behavior due to the differences in binding capacity to organic matter. The mechanisms of soil organic matter affecting the mobility and bioavailability of Ge in soil-plant system remain unclear. This work aimed to investigate the soil Ge fractions and Ge binding to humic substances in paddy soil. Paddy soil samples taken from Changxing County, Zhejiang Province, China, were investigated by the sequential extraction method. Humic acid (HA) and fulvic acid (FA) isolated from paddy soils were characterized by Fourier transform infrared spectrometry (FT-IR) and 3-dimensional excitation-emission matrix (3D-EEM). The effect of humic substances on the binding of Ge was studied by fluorescence-quenching titration. Results showed that residual Ge was the dominant fraction in soil (up to 85%). The mobile Ge, organic matter bound Ge and easily reduceable compounds bound Ge accounted for approximately 10% of soil TGe and may represented critical labile pools of soil Ge. Organic matter bound Ge significantly correlated (r = 0.56, p < 0.01) with rice Ge concentrations. The fluorescence of HA and FA was markedly quenched by the addition of Ge. The conditional stability constant of HA-Ge complexes was larger than that of FA-Ge complexes, and the complexation capacity of HA-Ge complexes was lower than that of FA-Ge complexes. Humic substances played a dual role in affecting the behavior of dissolved Ge in paddy soil. HA formed stable complexes with Ge and tended to sequester Ge, while FA formed soluble and unstable complexes with Ge and tended to act as a Ge carrier in soil-plant system.

Substituting HF by HBF4- an optimized digestion method for multi-elemental sediment analysis via ICP-MS/MS

Determination of elemental mass fractions in sediments plays a major role in evaluating the environmental status of aquatic ecosystems. Herewith, the optimization of a new total digestion protocol and the subsequent analysis of 48 elements in different sediment reference materials (NIST SRM 2702, GBW 07313, GBW 07311 and JMC-2) based on ICP-MS/MS detection is presented. The developed method applies microwave acid digestion and utilizes HBF₄ as fluoride source for silicate decomposition. Similar to established protocols based on HF, HBF₄ ensures the dissolution of the silicate matrix, as well as other refractory oxides. As HBF₄ is not acutely toxic; no special precautions have to be made and digests can be directly measured via ICP-MS without specific sample inlet systems, evaporation steps or the addition of e.g. H₃BO₃, in order to mask excess HF. Different acid mixtures with and without HBF₄ were evaluated in terms of digestion efficiency based on the trace metal recovery. The optimized protocol (5 mL HNO₃, 2 mL HCL, 1 mL HBF₄) allows a complete dissolution of the analyzed reference materials, as well as quantitative recoveries for a wide variety of certified analytes. Low recoveries for e.g. Sr, Ba and rare earth elements due to fluoride precipitation of HF-based digestions protocols, can be avoided by the usage of HBF₄ instead. Based on the usage of high purity HBF₄ all relevant trace, as well as matrix elements can be analyzed with sufficiently low LOQs (0.002 μg L^-1 for U up to 6.7 μg L^-1 for Al). In total, 34 elements were within a recovery range of 80%-120% for all three analyzed reference materials GBW 07313, GBW 07311 and JMC-2. 14 elements were outside a recovery range of 80%-120% for at least one of the analyzed reference materials.

Thallium(I) sequestration by jarosite and birnessite: Structural incorporation vs surface adsorption

Jarosite and birnessite secondary minerals play a pivotal role in the mobility, transport and fate of trace elements in the environment, although geochemical interactions of these compounds with extremely toxic thallium (Tl) remain poorly known. In this study, we investigated the sorption behavior of Tl(I) onto synthetic jarosite and birnessite, two minerals commonly found in soils and sediments as well as in mining-impacted areas where harsh conditions are involved. To achieve this, sorption and desorption experiments were carried out under two different acidic conditions and various Tl(I) concentrations to mimic natural scenarios. In addition, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and inductively coupled plasma (ICP) analyses were conducted to determine the performance of both minerals for Tl(I) sequestration. Our results indicate that both phases can effectively remove aqueous Tl by different sorption mechanisms. Jarosite preferentially incorporates Tl(I) into the structure to form Tl(I)-jarosite and eventually the mineral dorallcharite (TlFe₃(SO₄)₂(OH)₆) as increasing amounts of Tl are employed. Birnessite, however, favorably uptakes Tl(I) through an irreversible surface adsorption mechanism, underlining the affinity of Tl for this mineral in the entire concentration range studied (0.5-5 mmol L^-1). Lastly, the presence of Tl(I) in conditions where aqueous molar ratio Tl/Mn is ∼0.25 inhibits the formation of birnessite since oxidation of Tl(I) to Tl(III) followed by precipitation of avicennite (Tl₂O₃) take place. Thus, the present research may provide useful insights on the role of both jarosite and birnessite minerals in Tl environmental cycles.

Uptake, translocation, size characterization and localization of cerium oxide nanoparticles in radish (Raphanus sativus L.)

Due to their unique physical and chemical properties, the production and use of cerium oxide nanoparticles (CeO₂ NPs) in different areas, especially in automotive industry, is rapidly increasing, causing their presence in the environment. Released CeO₂ NPs can undergo different transformations and interact with the soil and hence with plants, providing a potential pathway for human exposure and leading to serious concerns about their impact on the ecosystem and human organism. This study investigates the uptake, bioaccumulation, possible translocation and localization of CeO₂ NPs in a model plant (Raphanus sativus L.), whose edible part is in direct contact with the soil where contamination is more likely to happen. The stability of CeO₂ NPs in plant growth medium as well as after applying a standard enzymatic digestion procedure was tested by single particle ICP-MS (SP-ICP-MS) showing that CeO₂ NPs can remain intact after enzymatic digestion; however, an agglomeration process was observed in the growth medium already after one day of cultivation. An enzymatic digestion method was next used in order to extract intact nanoparticles from the tissues of plants cultivated from the stage of seeds, followed by size characterization by SP-ICP-MS. The results obtained by SP-ICP-MS showed a narrower size distribution in the case of roots suggesting preferential uptake of smaller nanoparticles which led to the conclusion that plants do not take up the CeO₂ NPs agglomerates present in the medium. However, nanoparticles at higher diameters were observed after analysis of leaves plus stems. Additionally, a small degree of dissolution was observed in the case of roots. Finally, after CeO₂ NPs treatment of adult plants, the spatial distribution of intact CeO₂ NPs in the radish roots was studied by laser ablation ICP-MS (LA-ICP-MS) and the ability of NPs to enter and be accumulated in root tissues was confirmed.

Quantifying indium with ion chromatography in hydro- and biohydrometallurgical leaching solutions

A methodology has been developed to chromatographically quantify indium in polymetallic (bio)hydrometallurgical processing solutions using the Dionex IonPac CS5A column and pyridine-2,6-dicarboxylic acid eluent. Cu(II) and In(III) could be separated by elevating the column temperature to 45°C. The comparatively low stability constant of the In-eluent complex (log K₂  = 3.8) required typical leaching samples to be diluted in the eluent rather than acid or water to overcome ligand competition between components of the sample solution and the eluent. The methodology was applied to leachates from (bio)hydrometallurgical processing of oxidic flue dust residues and sulfidic zinc ores, where both are promising candidates for the recovery of indium from low grade ores and metallurgical wastes. Indium, ferrous iron, ferric iron, copper, zinc, nickel, and manganese concentrations could be simultaneously quantified. The method was found suitable for samples containing at least 0.25 mg/L indium and an iron to indium ratio of up to 100:1.