Polymer hydrogel interfaces in electrochemical sensing strategies: A review

Portable electrochemical sensor for adrenaline detection using CoNi-MOF-based CS-PAM hydrogel

The development of a portable smartphone-based electrochemical sensor for analyzing adrenaline levels in real samples can make a great contribution to the research community worldwide. In order to achieve this goal, the key challenge is to build sensing interfaces with excellent electrocatalytic properties. In this work, microspherical bimetallic metal-organic frameworks (CoNi-MOF) consisting of nanoclusters were first synthesized using a hydrothermal method. On this basis, the catalytic activity of pure chitosan-polyacrylamide hydrogel (CS-PAM) was modulated by adding different amounts of CoNi-MOF during the in-situ synthesis of CS-PAM. Finally, a portable electrochemical detection system based on CS-PAM was established for the detection of adrenaline. A series of resulting composite hydrogels with a large specific surface area, abundant active sites, and unique network structure facilitate the enrichment and catalysis of adrenaline molecules. Under optimal conditions, the analytical platform constructed by using CoNi-MOF-based CS-PAM has the advantages of a wide detection range (0.5-10 and 10-2500 μM), a low detection limit (0.167 μM), and high sensitivity (0.182 and 0.133 μA·μM·cm-2). In addition, the sensor maintains selective detection of the target in the presence of many different types of interferences, and the current response is not significantly reduced even after 60 cycles of testing. We strongly believe that the designed smart portable sensing can realize the accurate determination of adrenaline in complex systems, and this study can provide new ideas for the research of MOFs-based hydrogels in electrochemical analysis.

A universal three-dimensional hydrogel electrode for electrochemical detection of SARS-CoV-2 nucleocapsid protein and hydrogen peroxide

Coronavirus disease 2019 (COVID-19) is a highly contagious illness caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), resulting in a global health crisis. The primary diagnostic method for COVID-19 is quantitative reverse transcription PCR, which is time-consuming and requires expensive instrumentation. Here, we developed an electrochemical biosensor for detecting SARS-CoV-2 biomarkers using a 3D porous polyacrylamide/polyaniline hydrogel (PPG) electrode prepared by UV photopolymerization and in situ polymerization. The electrochemical immunosensor for detecting SARS-CoV-2 N protein via the immune sandwich principle demonstrated a lower detection limit of 42 pg/mL and comparable specificity to a commercial enzyme-linked immunosorbent assay, which was additionally validated in pseudoviruses. The electrochemical sensor for hydrogen peroxide showed a low detection limit of 0.5 μM and excellent selectivity, which was further confirmed in cancer cells under oxidative stress. The biomarkers of SARS-CoV-2 were successfully detected due to the signal amplification capability provided by 3D porous electrodes and the high sensitivity of the antigen-antibody specific binding. This study introduces a novel three-dimensional electrode with great potential for the early detection of SARS-CoV-2.

Hydrogel-integrated sensors for food safety and quality monitoring: Fabrication strategies and emerging applications

Food safety is a global issue in public hygiene. The accurate, sensitive, and on-site detection of various food contaminants performs significant implications. However, traditional methods suffer from the time-consuming and professional operation, restricting their on-site application. Hydrogels with the merits of highly porous structure, high biocompatibility, good shape-adaptability, and stimuli-responsiveness offer a promising biomaterial to design sensors for ensuring food safety. This review describes the emerging applications of hydrogel-based sensors in food safety inspection in recent years. In particular, this study elaborates on their fabrication strategies and unique sensing mechanisms depending on whether the hydrogel is stimuli-responsive or not. Stimuli-responsive hydrogels can be integrated with various functional ligands for sensitive and convenient detection via signal amplification and transduction; while non-stimuli-responsive hydrogels are mainly used as solid-state encapsulating carriers for signal probe, nanomaterial, or cell and as conductive media. In addition, their existing challenges, future perspectives, and application prospects are discussed. These practices greatly enrich the application scenarios and improve the detection performance of hydrogel-based sensors in food safety detection.

Probing the influence of crosslinkers on the properties, response, and degradation of enzymatic hydrogels for electrochemical glucose biosensing through fluorescence analysis

Drop-cast crosslinked hydrogels are a common platform for enzymatic electrochemical biosensors. Despite the widespread use of these complex systems, there are still several questions about how their physicochemical properties affect their performance, stability, and reproducibility. In this work, first-generation faradaic biosensors composed of glucose oxidase and branched polyethyleneimine (BPEI) are prepared using either glutaraldehyde (GA) or ethylene glycol diglycidyl ether (EGDGE) as crosslinkers. While EGDGE gels present an increasing electrochemical response with increasing crosslinker concentration, the current of GA gels decreases at high crosslinker concentration probably due to the hampered diffusion on tightly networked gels. We compared different strategies to use fluorescence microscopy to gain insight into the gel structure either by labeling the gel components with fluorophores or taking advantage of the intrinsic fluorescence of the imines formed upon crosslinking with GA. By monitoring the fluorescence of the crosslinking bonds and the electrochemical response, we demonstrate that hydrolysis, a common hydrogel degradation mechanism, is not responsible for the loss of electrical current over time in gels prepared with glutaraldehyde. Most hydrogel-based electrochemical biosensor studies do not perform specific experiments to determine the cause of the degradation and instead just infer it from the dependence of the current on the preparation conditions (most commonly concentrations). We show that, by taking advantage of several analytical techniques, it is possible to gain more knowledge about the degradation mechanisms and design better enzymatic biosensors.

Arabinoxylans matrixes as a potential material for drug delivery systems development - A bibliometric analysis and literature review

Arabinoxylans (AX) have become a focal point in the pharmaceutical sector owing to their physicochemical, biological, and functional properties. The purpose of this paper was to present a summary of the utilization of AX as drug release matrices through a bibliometric analysis (BA) and a literature review to spotlight the AX functional characteristics and their technological applications to promote this line of research. The BA was carried out using data from a Web of Science database research, specifically emphasizing the analysis of authors' keywords. This approach was chosen due to its significance in comprehensively understanding a particular research field and its relevance for in-depth knowledge of a research field. The BA outcomes revealed limited information concerning the AX applications in both release matrices and as excipients in the formulation and development of drug delivery systems (DDS), so there is a need for additional scientific and technological research in these areas to address the existing information gaps. However, the literature review shows that the native and modified AX from different delivery release systems, such as macrogels (including films, tablets, and hard gelatin capsules) and multi-particulate systems (including micro and nanogels), present an excellent potential as release matrices of biomolecules and drugs, such as doxorubicin, diclofenac sodium, caffeine, gentamicin, tizanidine hydrochloride, and insulin. In conclusion, AX have a wide potential for application in the pharmaceutical industry, so this work is expected to be a reference point for future research by scientists, technologists, and entrepreneurs who cope with the subject.

Recent Studies and Applications of Hydrogel-Based Biosensors in Food Safety

Food safety has increasingly become a human health issue that concerns all countries in the world. Some substances in food that can pose a significant threat to human health include, but are not limited to, pesticides, biotoxins, antibiotics, pathogenic bacteria, food quality indicators, heavy metals, and illegal additives. The traditional methods of food contaminant detection have practical limitations or analytical defects, restricting their on-site application. Hydrogels with the merits of a large surface area, highly porous structure, good shape-adaptability, excellent biocompatibility, and mechanical stability have been widely studied in the field of food safety sensing. The classification, response mechanism, and recent application of hydrogel-based biosensors in food safety are reviewed in this paper. Furthermore, the challenges and future trends of hydrogel biosensors are also discussed.

Space-Confined Electrochemical Aptasensing with Conductive Hydrogels for Enhanced Applicability to Aflatoxin B1 Detection

Aflatoxin B1 (AFB1) contamination has received considerable attention for the serious harm it causes and its wide distribution. Hence, its efficient monitoring is of great importance. Herein, a space-confined electrochemical aptasensor for AFB1 detection is developed using a conductive hydrogel. Plasmonic gold nanoparticles (AuNPs) and methylene blue-embedded double-stranded DNA (MB-dsDNA) were integrated into the conductive Au-hydrogel by ultraviolet (UV) polymerization. Specific recognition of AFB1 by the aptamer released MB from MB-dsDNA in the matrix. The free DNA migrated to the outer layer due to electrostatic repulsion during the Au-hydrogel formation. The electrochemical aptasensor based on this Au-hydrogel offered a twofold enlarged oxidation current of MB (IMB) compared with that recorded in the homogeneous solution for AFB1 detection. Upon light illumination, this IMB was further enlarged by the local surface plasmon resonance (LSPR) of the AuNPs. Ultimately, the Au-hydrogel-based electrochemical aptasensor provided a detection limit of 0.0008 ng mL-1 and a linear range of 0.001-1000 ng mL-1 under illumination for AFB1 detection. The Au-hydrogel allowed for space-confined aptasensing, favorable conductivity, and LSPR enhancement for better sensitivity. It significantly enhanced the applicability of the electrochemical aptasensor by avoiding complicated electrode fabrication and signal loss in a bulk homogeneous solution.

Self-healing hydrogel as an injectable implant: translation in brain diseases

Tissue engineering biomaterials are aimed to mimic natural tissue and promote new tissue formation for the treatment of impaired or diseased tissues. Highly porous biomaterial scaffolds are often used to carry cells or drugs to regenerate tissue-like structures. Meanwhile, self-healing hydrogel as a category of smart soft hydrogel with the ability to automatically repair its own structure after damage has been developed for various applications through designs of dynamic crosslinking networks. Due to flexibility, biocompatibility, and ease of functionalization, self-healing hydrogel has great potential in regenerative medicine, especially in restoring the structure and function of impaired neural tissue. Recent researchers have developed self-healing hydrogel as drug/cell carriers or tissue support matrices for targeted injection via minimally invasive surgery, which has become a promising strategy in treating brain diseases. In this review, the development history of self-healing hydrogel for biomedical applications and the design strategies according to different crosslinking (gel formation) mechanisms are summarized. The current therapeutic progress of self-healing hydrogels for brain diseases is described as well, with an emphasis on the potential therapeutic applications validated by in vivo experiments. The most recent aspect as well as the design rationale of self-healing hydrogel for different brain diseases is also addressed.

Self-regulating bioinspired supramolecular photonic hydrogels based on chemical reaction networks for monitoring activities of enzymes and biofuels

Inspired by the way many living organisms utilize chemical/biological reactions to regulate their skin and respond to stimuli in the external environment, we have developed a self-regulating hydrogel design by incorporating chemical reaction networks (CRNs) into biomimetic photonic crystal hydrogels. In this hydrogel system, we used host-guest supramolecular non-covalent bonds between beta-cyclodextrin (β-CD) and ferrocene (Fc) as partial crosslinkers and designed a CRN involving enzyme-fuel couples of horseradish peroxidase (HRP)/H₂O₂ and glucose oxidase (GOD)/d-glucose, by which the responsive hydrogel was transformed into a glucose-driven self-regulating hydrogel. Due to the biomimetic structural color in the hydrogel, the progress of the chemical reaction was accompanied by a change in the color of the hydrogel. Based on this principle, the designed supramolecular photonic hydrogel (SPH) can not only achieve naked-eye detection of H₂O₂ and glucose concentrations with the assistance of a smartphone but also monitor the reactions of HRP and GOD enzymes and determine their activity parameters. The sensitivity and stability of the sensor have been proven. In addition, due to the reversibility of the chemical reaction network, the sensor can be reused, thus having the potential to serve as a low-cost point-of-care sensor. The SPH was ultimately used to detect glucose in human plasma and H₂O₂ in liver tumor tissue. The results are comparable with commercial assay kits. By redesigning the chemical reaction network in the hydrogel, it is expected to be used for detecting other enzymes or fuels.

Silver Nanoparticle-Embedded Conductive Hydrogels for Electrochemical Sensing of Hydroquinone

In this work, a conductive hydrogel was successfully synthesized, taking advantage of the high number density of active amino and hydroxyl groups in carboxymethyl chitosan and sodium carboxymethyl cellulose. These biopolymers were effectively coupled via hydrogen bonding with the nitrogen atoms of the heterocyclic rings of conductive polypyrrole. The inclusion of another biobased polymer, sodium lignosulfonate (LS), was effective to achieve highly efficient adsorption and in-situ reduction of silver ions, leading to silver nanoparticles that were embedded in the hydrogel network and used to further improve the electro-catalytic efficiency of the system. Doping of the system in the pre-gelled state led to hydrogels that could be easily attached to the electrodes. The as-prepared silver nanoparticle-embedded conductive hydrogel electrode exhibited excellent electro-catalytic activity towards hydroquinone (HQ) present in a buffer solution. At the optimum conditions, the oxidation current density peak of HQ was linear over the 0.1-100 μM concentration range, with a detection limit as low as 0.12 μM (signal-to-noise of 3). The relative standard deviation of the anodic peak current intensity was 1.37% for eight different electrodes. After one week of storage in a 0.1 M Tris-HCl buffer solution at 4 °C, the anodic peak current intensity was 93.4% of the initial current intensity. In addition, this sensor showed no interference activity, while the addition of 30 μM CC, RS, or 1 mM of different inorganic ions does not have a significant impact on the test results, enabling HQ quantification in actual water samples.

High-Sensitivity Wearable Sensor Based On a MXene Nanochannel Self-Adhesive Hydrogel

To address the shortcomings of traditional filler-based wearable hydrogels, a new type of nanochannel hydrogel sensor is fabricated in this work through a combination of the unique structure of electrospun fiber textile and the properties of a double network hydrogel. Unlike the traditional Ti₃C₂T_x MXene-based hydrogels, the continuously distributed Ti₃C₂T_x MXene in the nanochannels of the hydrogel forms a tightly interconnected structure similar to the neuron network. As a result, they have more free space to flip and perform micromovements, which allows one to significantly increase the electrical conductivity and sensitivity of the hydrogel. According to the findings, the Ti₃C₂T_x MXene nanochannel hydrogel has excellent mechanical properties as well as self-adhesion and antifreezing characteristics. The hydrogel sensor successfully detects different human motions and physiological signals (e.g., low pulse signals) with high stability and sensitivity. Therefore, the proposed Ti₃C₂T_x MXene-based hydrogel with a unique structure and properties is very promising in the field of flexible wearable devices.

Biocompatible Material-Based Flexible Biosensors: From Materials Design to Wearable/Implantable Devices and Integrated Sensing Systems

Human beings have a greater need to pursue life and manage personal or family health in the context of the rapid growth of artificial intelligence, big data, the Internet of Things, and 5G/6G technologies. The application of micro biosensing devices is crucial in connecting technology and personalized medicine. Here, the progress and current status from biocompatible inorganic materials to organic materials and composites are reviewed and the material-to-device processing is described. Next, the operating principles of pressure, chemical, optical, and temperature sensors are dissected and the application of these flexible biosensors in wearable/implantable devices is discussed. Different biosensing systems acting in vivo and in vitro, including signal communication and energy supply are then illustrated. The potential of in-sensor computing for applications in sensing systems is also discussed. Finally, some essential needs for commercial translation are highlighted and future opportunities for flexible biosensors are considered.

Hydrogels-A Promising Materials for 3D Printing Technology

Hydrogels are a promising material for a variety of applications after appropriate functional and structural design, which alters the physicochemical properties and cell signaling pathways of the hydrogels. Over the past few decades, considerable scientific research has made breakthroughs in a variety of applications such as pharmaceuticals, biotechnology, agriculture, biosensors, bioseparation, defense, and cosmetics. In the present review, different classifications of hydrogels and their limitations have been discussed. In addition, techniques involved in improving the physical, mechanical, and biological properties of hydrogels by admixing various organic and inorganic materials are explored. Future 3D printing technology will substantially advance the ability to pattern molecules, cells, and organs. With significant potential for producing living tissue structures or organs, hydrogels can successfully print mammalian cells and retain their functionalities. Furthermore, recent advances in functional hydrogels such as photo- and pH-responsive hydrogels and drug-delivery hydrogels are discussed in detail for biomedical applications.

Temperature-Modulated Changes in Thin Gel Layer Thickness Triggered by Electrochemical Stimuli

A series of thermoresponsive hydrogels containing positively charged groups in the polymeric network were synthesized and modified with the electroactive compound 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS). ABTS, which forms a dianion in aqueous solutions, acts as an additional physical cross-linker and strongly affects the swelling ratio of the gels. The influence of the amount of positively charged groups and ABTS oxidation state on the volume phase transition temperature was investigated. A hydrogel that possesses a relatively wide and well-defined temperature window (the temperature range where changes in the ABTS oxidation state affects the swelling ratio significantly) was found. The influence of the presence and oxidation state of ABTS on mechanical properties was investigated using a tensile machine and a rheometer. Then, a very thin layer of the gel was deposited on an Au electrochemical quartz crystal microbalance with dissipation (EQCM-D) electrode using the electrochemically induced free radical polymerization method. Next, chronoamperometry combined with quartz crystal microbalance measurements, obtained with an Au EQCM-D electrode modified by the gel, showed that the size of the thin layer could be controlled by an electrochemical trigger. Furthermore, it was found that the electrosensitivity could be modulated by the temperature. Such properties are desired from the point of view construction of electrochemical actuators.

Hydrogel-Based Biosensors

There is an increasing interest in sensing applications for a variety of analytes in aqueous environments, as conventional methods do not work reliably under humid conditions or they require complex equipment with experienced operators. Hydrogel sensors are easy to fabricate, are incredibly sensitive, and have broad dynamic ranges. Experiments on their robustness, reliability, and reusability have indicated the possible long-term applications of these systems in a variety of fields, including disease diagnosis, detection of pharmaceuticals, and in environmental testing. It is possible to produce hydrogels, which, upon sensing a specific analyte, can adsorb it onto their 3D-structure and can therefore be used to remove them from a given environment. High specificity can be obtained by using molecularly imprinted polymers. Typical detection principles involve optical methods including fluorescence and chemiluminescence, and volume changes in colloidal photonic crystals, as well as electrochemical methods. Here, we explore the current research utilizing hydrogel-based sensors in three main areas: (1) biomedical applications, (2) for detecting and quantifying pharmaceuticals of interest, and (3) detecting and quantifying environmental contaminants in aqueous environments.

Nanoparticle–Hydrogel Based Sensors: Synthesis and Applications

Hydrogels are hydrophilic three-dimensional (3D) porous polymer networks that can easily stabilize various nanoparticles. Loading noble metal nanoparticles into a 3D network of hydrogels can enhance the synergy of the components. It can also be modified to prepare intelligent materials that can recognize external stimuli. The combination of noble metal nanoparticles and hydrogels to produce modified or new composite materials has attracted considerable attention as to the use of these materials in sensors. However, there is limited review literature on nanoparticle–hydrogel-based sensors. This paper presents the detailed strategies of synthesis and design of the composites, and the latest applications of nanoparticle–hydrogel materials in the sensing field. Finally, the current challenges and future development directions of nanoparticle–hydrogel-based sensors are proposed.

Preparation and Characterizations of PSS/PDADMACPolyelectrolyte Complex Hydrogel

Polyelectrolyte complex (PEC) hydrogel, formed via physically electrostatic crosslinks between polyanion and polycation, is an interesting hydrogel in terms of its nontoxicity and solvent-free technique. In this work, poly (sodium 4-styrenesulfonate) (PSS)/poly (diallyl dimethyl ammonium chloride) (PDADMAC) complex hydrogels were prepared. Firstly, the PSS/PDADMAC complex aggregates using various PSS/PDADMAC mole fractions that were prepared in the presence of NaCl solution. Then, the aggregates were resolubilized under stirring at 70 °C for 2 h to obtain a homogeneous PEC solution. Finally, the PEC solution was dialyzed using a dialysis membrane with 3500 molecular cut-off for 1 day. The dialysis bath was changed every interval period of 2 h to control the rate of reversible electrostatic interaction, resulting in the homogenous PEC hydrogel with porous morphology as revealed by SEM and BET investigations. The dimensional stability and viscoelasticity of the PEC hydrogel was studied by DMA experiment, which showed the viscoelastic behavior at a compressive force ranging from 0 to 0.1 N. Finally, PSS/PDADMAC hydrogels showed a high water absorbency property and excellent affinity to textile anionic dyes.

Potential application of hydrogel to the diagnosis and treatment of multiple sclerosis

Abstract

Multiple sclerosis (MS) is a chronic demyelinating disease of the central nervous system. This disorder may cause progressive and permanent impairment, placing significant physical and psychological strain on sufferers. Each progress in MS therapy marks a significant advancement in neurological research. Hydrogels can serve as a scaffold with high water content, high expansibility, and biocompatibility to improve MS cell proliferation in vitro and therapeutic drug delivery to cells in vivo. Hydrogels may also be utilized as biosensors to detect MS-related proteins. Recent research has employed hydrogels as an adjuvant imaging agent in immunohistochemistry assays. Following an overview of the development and use of hydrogels in MS diagnostic and therapy, this review discussed hydrogel’s advantages and future opportunities in the diagnosis and treatment of MS.

Graphical abstract

Emerging Fabrication Strategies of Hydrogels and Its Applications

Recently, hydrogels have been investigated for the controlled release of bioactive molecules, such as for living cell encapsulation and matrices. Due to their remote controllability and quick response, hydrogels are widely used for various applications, including drug delivery. The rate and extent to which the drugs reach their targets are highly dependent on the carriers used in drug delivery systems; therefore the demand for biodegradable and intelligent carriers is progressively increasing. The biodegradable nature of hydrogel has created much interest for its use in drug delivery systems. The first part of this review focuses on emerging fabrication strategies of hydrogel, including physical and chemical cross-linking, as well as radiation cross-linking. The second part describes the applications of hydrogels in various fields, including drug delivery systems. In the end, an overview of the application of hydrogels prepared from several natural polymers in drug delivery is presented.

Emerging biosensing and transducing techniques for potential applications in point-of-care diagnostics

With the deepening of our understanding in life science, molecular biology, nanotechnology, optics, electrochemistry and other areas, an increasing number of biosensor design strategies have emerged in recent years, capable of providing potential practical applications for point-of-care (POC) diagnosis in various human diseases. Compared to conventional biosensors, the latest POC biosensor research aims at improving sensor precision, cost-effectiveness and time-consumption, as well as the development of versatile detection strategies to achieve multiplexed analyte detection in a single device and enable rapid diagnosis and high-throughput screening. In this review, various intriguing strategies in the recognition and transduction of POC (from 2018 to 2021) are described in light of recent advances in CRISPR technology, electrochemical biosensing, and optical- or spectra-based biosensing. From the perspective of promoting emerging bioanalytical tools into practical POC detecting and diagnostic applications, we have summarized key advances made in this field in recent years and presented our own perspectives on future POC development and challenges.

An Overview on Recent Progress of the Hydrogels: From Material Resources, Properties to Functional Applications

Hydrogels, as the most typical elastomer materials with three-dimensional network structures, have attracted wide attention owing to their outstanding features in fields of sensitive stimulus response, low surface friction coefficient, good flexibility and bio-compatibility. Because of numerous fresh polymer materials (or polymerization monomers), hydrogels with various structure diversities and excellent properties are emerging, and the development of hydrogels is very vigorous over the past decade. This review focuses on state-of-the-art advances, systematically reviews the recent progress on construction of novel hydrogels utilized several kinds of typical polymerization monomers, and explores the main chemical and physical cross-linking methods to develop the diversity of hydrogels. Following the aspects mentioned above, the classification and emerging applications of hydrogels, such as pH response, ionic response, electrical response, thermal response, biomolecular response, and gas response, are extensively summarized. Finally, we have done this review with the promises and challenges for the future evolution of hydrogels and their biological applications. cross-linking methods; functional applications; hydrogels; material resources This article is protected by copyright. All rights reserved.

Dynamic Protein and Polypeptide Hydrogels Based on Schiff Base Co-assembly for Biomedicine

Stimuli-responsive hydrogels are promising building blocks for biomedical devices, attributable to their excellent hydrophilicity, biocompatibility, and dynamic responsiveness to temperature, light, pH, and water content. Although hydrogels find interesting applications...

Hydrogel-based holographic sensors and biosensors: past, present, and future

Hydrogel-based holographic sensors consist of a holographic pattern in a responsive hydrogel that diffracts light at different wavelengths depending on the dimensions and refractive index changes in the material. The material composition of hydrogels can be designed to be specifically responsive to different stimuli, and thus the diffraction pattern can correlate with the amount of analyte. According to this general principle, different approaches have been implemented to achieve label-free optical sensors and biosensors, with advantages such as easy fabrication or naked-eye detection. A review on the different approaches, sensing materials, measurement principles, and detection setups, and future perspectives is offered.

A Review of Sustained Drug Release Studies from Nanofiber Hydrogels

Polymer nanofibers have exceptionally high surface area. This is advantageous compared to bulk polymeric structures, as nanofibrils increase the area over which materials can be transported into and out of a system, via diffusion and active transport. On the other hand, since hydrogels possess a degree of flexibility very similar to natural tissue, due to their significant water content, hydrogels made from natural or biodegradable macromolecular systems can even be injectable into the human body. Due to unique interactions with water, hydrogel transport properties can be easily modified and tailored. As a result, combining nanofibers with hydrogels would truly advance biomedical applications of hydrogels, particularly in the area of sustained drug delivery. In fact, certain nanofiber networks can be transformed into hydrogels directly without the need for a hydrogel enclosure. This review discusses recent advances in the fabrication and application of biomedical nanofiber hydrogels with a strong emphasis on drug release. Most of the drug release studies and recent advances have so far focused on self-gelling nanofiber systems made from peptides or other natural proteins loaded with cancer drugs. Secondly, polysaccharide nanofiber hydrogels are being investigated, and thirdly, electrospun biodegradable polymer networks embedded in polysaccharide-based hydrogels are becoming increasingly popular. This review shows that a major outcome from these works is that nanofiber hydrogels can maintain drug release rates exceeding a few days, even extending into months, which is an extremely difficult task to achieve without the nanofiber texture. This review also demonstrates that some publications still lack careful rheological studies on nanofiber hydrogels; however, rheological properties of hydrogels can influence cell function, mechano-transduction, and cellular interactions such as growth, migration, adhesion, proliferation, differentiation, and morphology. Nanofiber hydrogel rheology becomes even more critical for 3D or 4D printable systems that should maintain sustained drug delivery rates.

Non-invasive wearable chemical sensors in real-life applications

Over the past decade, non-invasive wearable chemical sensors have gained tremendous attention in the field of personal health monitoring and medical diagnosis. These sensors provide non-invasive, real-time, and continuous monitoring of targeted biomarkers with more simplicity than the conventional diagnostic approaches. This review primarily describes the substrate materials used for sensor fabrication, sample collection and handling, and analytical detection techniques that are utilized to detect biomarkers in different biofluids. Common substrates including paper, textile, and hydrogel for wearable sensor fabrication are discussed. Principles and applications of colorimetric and electrochemical detection in wearable chemical sensors are illustrated. Data transmission systems enabling wireless communication between the sensor and output devices are also discussed. Finally, examples of different designs of wearable chemical sensors including tattoos, garments, and accessories are shown. Successful development of non-invasive wearable chemical sensors will effectively help users to manage their personal health, predict the potential diseases, and eventually improve the overall quality of life.

Hydrogel-Based Optical Ion Sensors: Principles and Challenges for Point-of-Care Testing and Environmental Monitoring

Hydrogel is a unique family of biocompatible materials with growing applications in chemical and biological sensors. During the past few decades, various hydrogel-based optical ion sensors have been developed aiming at point-of-care testing and environmental monitoring. In this Perspective, we provide an overview of the research field including topics such as photonic crystals, DNAzyme cross-linked hydrogels, ionophore-based ion sensing hydrogels, and fluoroionophore-based optodes. As the different sensing principles are summarized, each strategy offers its advantages and limitations. In a nutshell, developing optical ion sensing hydrogels is still in the early stage with many opportunities lying ahead, especially with challenges in selectivity, assay time, detection limit, and usability.

Length-Dependent, Single-Molecule Analysis of Short Double-Stranded DNA Fragments through Hydrogel-Filled Nanopores: A Potential Tool for Size Profiling Cell-Free DNA

Fast sampling followed by sequence-independent sensing and length-dependent detection of short double-stranded DNA fragments, the size of those found in blood and other bodily fluids, is achieved using engineered molecular sensors, dubbed hydrogel-filled nanopores (HFNs). Fragments as short as 100 base pairs were blindly sampled and concentrated at the tip of an HFN before reversing the applied potential to detect and distinguish individual molecules based on fragment length as they translocate out of the nanopore. A remarkable 16-fold increase in the signal-to-noise ratio was observed in the eject configuration compared to the load configuration, enabling the resolution of fragments with a size difference of 50 nucleotides in length. This fast and versatile technology offers great tunability for both sampling and detection. While increasing sampling time leads to an increase in the local DNA concentration at the tip prior to detection, a linear correlation between the peak current and DNA fragment size enables good resolution of fragments up to 250 bp long.

Hydrogels and Their Role in Biosensing Applications

Hydrogels play an important role in the field of biomedical research and diagnostic medicine. They are emerging as a powerful tool in the context of bioanalytical assays and biosensing. In this context, this review gives an overview of different hydrogels and the role they adopt in a range of applications. Not only are hydrogels beneficial for the immobilization and embedding of biomolecules, but they are also used as responsive material, as wearable devices, or as functional material. In particular, the scientific and technical progress during the last decade is discussed. The newest hydrogel types, their synthesis, and many applications are presented. Advantages and performance improvements are described, along with their limitations.

Molecule-Specific Terahertz Biosensors Based on an Aptamer Hydrogel-Functionalized Metamaterial for Sensitive Assays in Aqueous Environments

Metamaterial-inspired terahertz (THz) biosensors are devoted to developing high-sensitivity and label-free biosensing strategies. However, most meaningful molecular signals are obscured by the strong THz absorption of solvent water. Most reported THz biosensors require the tested samples to be tediously dried or replaced with a low-absorption medium, which impairs the original bioactivity and the distribution homogeneity of targets. As described in this proposed strategy, a molecule-specific THz biosensor was fabricated from an aptamer hydrogel-functionalized THz metamaterial. Benefitting from the strong interaction with the localized electric field of the metamaterial, trace thrombin-induced variations in the hydration state of the hydrogel can be sensitively probed, which was investigated experimentally and theoretically. The optimized THz biosensor exhibited remarkable specificity for actual serum sample assays and excellent sensitivity, with a relatively low detection limit of 0.40 pM in the human serum matrix. The proposed strategy could serve as a model system to develop various molecule-specific THz biosensors for aqueous molecule sensing.

Soft Materials by Design: Unconventional Polymer Networks Give Extreme Properties

Hydrogels are polymer networks infiltrated with water. Many biological hydrogels in animal bodies such as muscles, heart valves, cartilages, and tendons possess extreme mechanical properties including being extremely tough, strong, resilient, adhesive, and fatigue-resistant. These mechanical properties are also critical for hydrogels' diverse applications ranging from drug delivery, tissue engineering, medical implants, wound dressings, and contact lenses to sensors, actuators, electronic devices, optical devices, batteries, water harvesters, and soft robots. Whereas numerous hydrogels have been developed over the last few decades, a set of general principles that can rationally guide the design of hydrogels using different materials and fabrication methods for various applications remain a central need in the field of soft materials. This review is aimed at synergistically reporting: (i) general design principles for hydrogels to achieve extreme mechanical and physical properties, (ii) implementation strategies for the design principles using unconventional polymer networks, and (iii) future directions for the orthogonal design of hydrogels to achieve multiple combined mechanical, physical, chemical, and biological properties. Because these design principles and implementation strategies are based on generic polymer networks, they are also applicable to other soft materials including elastomers and organogels. Overall, the review will not only provide comprehensive and systematic guidelines on the rational design of soft materials, but also provoke interdisciplinary discussions on a fundamental question: why does nature select soft materials with unconventional polymer networks to constitute the major parts of animal bodies?

Fluorescent Noble Metal Nanoclusters Loaded Protein Hydrogel Exhibiting Anti-Biofouling and Self-Healing Properties for Electrochemiluminescence Biosensing Applications

Electrochemiluminescence (ECL) showed great potential in various analytical applications, especially in the sensing of biotargets, taking advantage of its high sensitivity, selectivity, ease of spatial and temporal control, and simplified optical setup. However, during the sensing of complex biological samples, ECL sensors often suffered severe interferences from unavoidable nonspecific-binding of biomacromolecules and physical damages of ECL sensing interfaces. Herein, a hydrogel based ECL biosensing system exhibiting excellent anti-biofouling and self-healing properties is developed. A protein hydrogel composed of bovine serum albumin (BSA) directed fluorescent Au/Ag alloy nanoclusters (Au/Ag NCs) is applied in building ECL sensing systems. The hydrogel matrix facilitates the immobilization of fluorescent Au/Ag NCs as excellent ECL probes, and the porous hydrophilic structure allows the free diffusion of small molecular biotargets while rejecting macromolecular interferences. Moreover, the hydrogel exhibits excellent self-healing property, with the ECL intensity recovered rapidly in 10 min after cutting. The hydrogel ECL system is successfully applied in sensing glutathione (GSH) in serum, confirming the applicability of the hydrogel based anti-biofouling ECL sensing system in sensing complex biological samples. This research may inspire the development of novel anti-biofouling and self-healing ECL biosensors for biosensing applications.

Printing-Based Assay and Therapy of Antioxidants

Antioxidants are essential in regulating various physiological functions and oxidative deterioration. Over the past decades, many researchers have paid attention to antioxidants and studied the screening of antioxidants from natural products and their utilization for treatments in diverse pathological conditions. Nowadays, as printing technology progresses, its influence in the field of biomedicine is growing significantly. The printing technology has many advantages. Especially, the capability of designing sophisticated platforms is useful to detect antioxidants in various samples. The high flexibility of 3D printing technology is advantageous to create geometries for customized patient treatment. Recently, there has been increasing use of antioxidant materials for this purpose. This review provides a comprehensive overview of recent advances in printing technology-based assays to detect antioxidants and 3D printing-based antioxidant therapy in the field of tissue engineering. This review is divided into two sections. The first section highlights colorimetric assays using the inkjet-printing methods and electrochemical assays using screen-printing techniques for the determination of antioxidants. Alternative screen-printing techniques, such as xurography, roller-pen writing, stamp contact printing, and laser-scribing, are described. The second section summarizes the recent literature that reports antioxidant-based therapy using 3D printing in skin therapeutics, tissue mimetic 3D cultures, and bone tissue engineering.

Water Interactions in Hybrid Polyacrylate-Silicate Hydrogel Systems

Hybrid polyacrylate-silicate hydrogels were obtained in the presence of N,N'-methylenebisacrylamide (NNMBA) as the cross-linking monomer and sodium thiosulphate/potassium persulphate (NTS/KPS) as the redox initiators. The results of the tests allowed us to conclude that a hybrid structure with a polyacrylate scaffolding and a silicate matrix had been obtained. The results of the rheological analysis revealed that the hydrogel sample with a 1:7 mass ratio of sodium water glass to the sodium polyacrylate is characterized by the highest complex viscosity. Thermal analysis (Thermogravimetry/Differential Scanning Calorimetry (TG/DSC)) showed that water begins to evaporate at higher temperatures, from 120 °C to even 180 °C. These results were confirmed by mid-infrared spectroscopy (MIR) and nuclear magnetic resonance spectroscopy (NMR) analysis. Differences in the intensity of the peaks derived from water in the MIR spectra indicate that most of the water is bounded. In turn, NMR results showed that the mobility of water molecules decreases as the amount of sodium water glass in the mixture increases.

Wearable piezoelectric mass sensor based on pH sensitive hydrogels for sweat pH monitoring

Colorimetric and electrochemical (bio)sensors are commonly employed in wearable platforms for sweat monitoring; nevertheless, they suffer from low stability of the sensitive element. In contrast, mass-(bio)sensors are commonly used for analyte detection at laboratory level only, due to their rigidity. To overcome these limitations, a flexible mass-(bio)sensor for sweat pH sensing is proposed. The device exploits the flexibility of piezoelectric AlN membranes fabricated on a polyimide substrate combined to the sensitive properties of a pH responsive hydrogel based on PEG-DA/CEA molecules. A resonant frequency shift is recorded due to the hydrogel swelling/shrinking at several pH. Our device shows a responsivity of about 12 kHz/pH unit when measured in artificial sweat formulation in the pH range 3–8. To the best of our knowledge, this is the first time that hydrogel mass variations are sensed by a flexible resonator, fostering the development of a new class of compliant and wearable devices.

Self-assembled reduced graphene oxide–cerium oxide nanocomposite@cytochromechydrogel as a solid electrochemical reactive oxygen species detection platform

A new dimension for the selective detection of short-lived ROS by an electroactive reduced graphene oxide–cerium oxide nanocomposite@cytochromechydrogel.