Chiral sensors

Magneto-electrochemical method for chiral recognition of amino acid enantiomers

Chiral recognition of enantiomers with identical mirror-symmetric molecular structures is important for the analysis of biomolecules, and it conventionally relies on stereoselective interactions in chiral chemical environments. Here, we develop a magneto-electrochemical method for the enhanced detection of chiral amino acids (AAs), that combines the advantages of the high sensitivity of electrochemiluminescent (ECL) biosensors and chirality-induced effects under a magnetic field. The ECL difference between L- and D-enantiomers can be amplified over 35-fold under a field of 3.5 kG, and the chiral discrimination can be achieved in dilute AA solutions down to the nM level. The field-dependent ECL and chronocoulometry measurements suggest that chiral AAs can lock the spins on their radicals and thus enlarge the ECL change under applied magnetic fields (magneto-ECL, MECL), which explains the field-enhanced chiral discrimination of AA enantiomers. Finally, a detailed protocol is demonstrated for the identification of unknown AA solutions, in which the species, chirality and concentration of AAs can be determined simultaneously from the 2D plots of the ECL and MECL results. This work benefits the development of field-assisted detection methods and represents a promising and universal strategy for the comprehensive analysis of chiral biomolecules.

Emerging potentials of Fe-based nanomaterials for chiral sensing and imaging

Fe-based nanostructures have possessed promising properties that make it suitable for chiral sensing and imaging applications owing to their ultra-small size, non-toxicity, biocompatibility, excellent photostability, tunable fluorescence, and water solubility. This review summarizes the recent research progress in the field of Fe-based nanostructures and places special emphases on their applications in chiral sensing and imaging. The synthetic strategies to prepare the targeted Fe-based structures were also introduced. The chiral sensing and imaging applications of the nanostructures are discussed in details.

Colloidal Chiral Carbon Dots: An Emerging System for Chiroptical Applications

Chiral CDots (c-CDots) not only inherit those merits from CDots but also exhibit chiral effects in optical, electric, and bio-properties. Therefore, c-CDots have received significant interest from a wide range of research communities including chemistry, physics, biology, and device engineers. They have already made decent progress in terms of synthesis, together with the exploration of their optical properties and applications. In this review, the chiroptical properties and chirality origin in extinction circular dichroism (ECD) and circularly polarized luminescence (CPL) of c-CDots is briefly discussed. Then, the synthetic strategies of c-CDots is summarized, including one-pot synthesis, post-functionalization of CDots with chiral ligands, and assembly of CDots into chiral architectures with soft chiral templates. Afterward, the chiral effects on the applications of c-CDots are elaborated. Research domains such as drug delivery, bio- or chemical sensing, regulation of enzyme-like catalysis, and others are covered. Finally, the perspective on the challenges associated with the synthetic strategies, understanding the origin of chirality, and potential applications is provided. This review not only discusses the latest developments of c-CDots but also helps toward a better understanding of the structure-property relationship along with their respective applications.

Pure Covalent-Organic Framework Membrane as a Label-Free Biomimetic Nanochannel for Sensitive and Selective Sensing of Chiral Flavor Substances

Chiral flavor substances play an important role in the human perception of different tastes. Here, we report a pure covalent-organic framework (COF) membrane nanochannel in combination with a chiral gold nanoparticles (AuNPs) selector for sensing chiral flavor substances. The pure COF membrane with a proper pore size is selected as the nanochannel, while l-cysteine-modified AuNPs (l-Cys-AuNPs) are used as the chiral selector. l-Cys-AuNPs show stronger binding to the S-enantiomer than the R-enantiomer, causing current reduction to different degrees for the R- and S-enantiomer to achieve chiral sensing due to the synergistic effect of the size exclusion of the COF nanochannel and the chiral selectivity of l-Cys-AuNPs. The developed COF membrane nanochannel sensing platform not only allows an easy balance of the permeability and selectivity, which is difficult to achieve in traditional polymer membrane nanochannel sensors, but also exhibits better chiral performance than commercial artificial anodic aluminum oxide (AAO) nanochannel sensors. The developed nanochannel sensor is successfully applied for sensing flavor enantiomers such as limonene, propanediol, methylbutyric acid, and butanol with the enantiomer excess values of 55.2% (propanediol) and 72.4% (limonene) and the low detection limits of 36 (limonene) and 71 (propanediol) ng L-1. This study provides a new idea for the construction of nanochannel platforms based on the COF for sensitive and selective chiral sensing.

A cooperation tale of biomolecules and nanomaterials in nanoscale chiral sensing and separation

The cooperative relationship between biomolecules and nanomaterials makes up a beautiful tale about nanoscale chiral sensing and separation. Biomolecules are considered a fabulous chirality 'donor' to develop chiral sensors and separation systems. Nature has endowed biomolecules with mysterious chirality. Various nanomaterials with specific physicochemical attributes can realize the transmission and amplification of this chirality. We focus on highlighting the advantages of combining biomolecules and nanomaterials in nanoscale chirality. To enhance the sensors' detection sensitivity, novel cooperation approaches between nanomaterials and biomolecules have attracted tremendous attention. Moreover, innovative biomolecule-based nanocomposites possess great importance in developing chiral separation systems with improved assay performance. This review describes the formation of a network based on nanomaterials and biomolecules mainly including DNA, proteins, peptides, amino acids, and polysaccharides. We hope this tale will record the perpetual relation between biomolecules and nanomaterials in nanoscale chirality.

Design of molecularly imprinted resin material with sulfonic acid functionalization for enantioseparation of (±)-cathine

In the current work, an enantioselective imprinting technique was used to develop a very selective adsorbent for the (+)-cathine ((+)-Cat) enantiomer. The phenolic sulfonamide produced from 2,4-dihydroxybenzenesulfonic acid (HBS) and (+)-Cat ((+)-Cat-HBS) was initially synthesized by triphenylphosphene activation and subsequently involved in condensation polymerization with resorcinol in the presence of formaldehyde under acidic conditions. Alkaline sulfonamide bond-breaking was subsequently employed to separate the (+)-Cat template from the polymer, and the resulting imprinted resin ((+)-CIP) displayed high selectivity for the (+)-Cat, with a capacity of 225 ± 2 mg/g. Studies of selectivity also showed that the (+)-Cat enantiomer was preferred over its counterpart because of the development of configurationally matching receptors. In addition, the produced resin was used for the enantioresolution of (±)-Cat racemate by column method, yielding a loading supernatant solution with an enantiomeric excess of (+)-Cat 50% and a recovery eluant solution with an excess of (-)-Cat 85%.

Chiral Recognition of D/L-Ribose by Visual and SERS Assessments

Ribose is the central molecular unit in ribose nucleic acid (RNA). Ribose is a key molecule in the study of many persistent scientific mysteries, such as the origin of life and the chiral homogeneity of biological molecules. Therefore, the chiral recognition of ribose is of great significance. The traditional method of chiral recognition of ribose is HPLC, which is time-consuming, expensive, and can only be operated in the laboratory. There is no report on optical analytical techniques that can quickly detect the chirality of ribose. In this study, a simple and convenient approach for the chiral recognition of ribose has been developed. β-cyclodextrin(β-CD)-coated Ag NPs aggregate after adding D-ribose, so that D-/L-ribose can be identified using visual colorimetry and/or surface-enhanced Raman spectroscopy (SERS). The color change visible to the naked eye can readily distinguish the chirality of ribose, while the SERS method can provide the more sensitive analysis of enantiomeric ribose. The advantages of this method are that it is fast, convenient, low cost, and can be operated outside the laboratory. DFT calculations show that D-ribose and cyclodextrin have the same chirality, forming multiple strong hydrogen bonds between them; thus, D/L-ribose will induce different optical effects.

Separation of tamsulosin enantiomers by capillary electrophoresis with tandem mass spectrometry and online stacking preconcentration

The aim of our work was to develop a new method for the analysis of tamsulosin enantiomers by capillary electrophoresis connected with tandem mass spectrometry. The pharmacologically active (R)-enantiomer of tamsulosin, is used to treat benign prostatic hyperplasia and chronic prostatitis. Under the optimal conditions, background electrolyte consisting of 200 mM acetic acid titrated with NH₄OH to pH 4.0 containing 4.0 mg mL^-1 sulfated β-cyclodextrin, an injection time of 40 s at 50 mbar, a voltage of 20 kV and an optimized MS set-up (as e.g., sheath liquid containing 75 : 24.9 : 0.1 MeOH, H₂O, and formic acid, v/v), a limit of detection of 1.6 nmol L^-1 was achieved. The method was validated in terms of linearity, detection and quantification limits, precision, recovery, and selectivity. The results showed that the method can be used for the analysis of tamsulosin enantiomers in environmental samples, but generally, it can be applied to many different analytical tasks.

Photoluminescent ellipsometric circular dichroism

A novel spectroscopic technique, photoluminescent ellipsometric circular dichroism (PECD), which distinguishes all radiative electronic transitions related to molecular chiral centers. Additionally, it is proposed as complementary to the ellipsometric Raman spectroscopy (ERS) technique, thus establishing a relationship between vibrational modes and electronic transitions, associated with molecular chiral centers. In this way, PECD turns into a powerful technique for chiral material characterization. The PECD technique was performed on a chiral oligomer (1R,2R)-diiminocyclohexane, and its derivative polymer. A complete photophysical characterization in solution was performed to corroborate the new PECD technique.

Laser-Induced Chirality of Plasmonic Nanoparticles Embedded in Porous Matrix

Chiral plasmonic nanostructures have emerged as promising objects for numerous applications in nanophotonics, optoelectronics, biosensing, chemistry, and pharmacy. Here, we propose a novel method to induce strong chirality in achiral ensembles of gold nanoparticles via irradiation with circularly-polarized light of a picosecond Nd:YAG laser. Embedding of gold nanoparticles into a nanoporous silicate matrix leads to the formation of a racemic mixture of metal nanoparticles of different chirality that is enhanced by highly asymmetric dielectric environment of the nanoporous matrix. Then, illumination with intense circularly-polarized light selectively modifies the particles with the chirality defined by the handedness of the laser light, while their "enantiomers" survive the laser action almost unaffected. This novel modification of the spectral hole burning technique leads to the formation of an ensemble of plasmonic metal nanoparticles that demonstrates circular dichroism up to 100 mdeg. An unforeseen peculiarity of the chiral nanostructures obtained in this way is that 2D and 3D nanostructures contribute almost equally to the observed circular dichroism signals. Thus, the circular dichroism is neither even nor odd under reversal of direction of light propagation. These findings will help guide the development of a passive optical modulator and nanoplatform for enhanced chiral sensing and catalysis.

Design and Electrochemical Chiral Sensing of the Robust Sandwich Chiral Composite d-His-ZIF-8@Au@ZIF-8

In the pursuit of chiral materials with significant chiral recognition effects and stability, various strategies have been explored, among which the integration of metal nanoparticles and chiral metal-organic frameworks (CMOFs) is highly promising. However, metal nanoparticles (MNPs)/CMOFs show high chiral properties but inferior stabilities due to the MNPs being easily detached from the outside layer under certain conditions. Sandwich MOFs@MNPs@CMOF chiral materials can overcome this dilemma because the sandwich structure can maximize the regulation of the chiral interface activity, while the controlled outer layer can stop the MNPs from falling off in the procedure of chiral recognition. Here, a novel sandwich chiral material (d-His-ZIF-8@Au@ZIF-8) was synthesized by a ligand-assisted strategy with a well-defined sandwich morphology and chiral recognition capabilities. The electrochemical chiral recognition showed that d-His-ZIF-8@Au@ZIF-8 was the most efficient for the enantiomer of phenylalanine (Phe). This experiment presents a novel perspective for the fabrication of a chiral electrochemical sensing platform based on a solid sandwich chiral nanocomposite.

Chiral Optical Properties of Möbius Graphene Nanostrips

The advancement of optical technology demands the development of chiral nanostructures with a strong dissymmetry of optical response. Here, we comprehensively analyze the chiral optical properties of circular twisted graphene nanostrips, with a particular emphasis on the case of a Möbius graphene nanostrip. We use the method of coordinate transformation to analytically model the electronic structure and optical spectra of the nanostrips, while employing the cyclic boundary conditions to account for their topology. It is found that the dissymmetry factors of twisted graphene nanostrips can reach 0.01, exceeding the typical dissymmetry factors of small chiral molecules by 1-2 orders of magnitude. The results of this work thus demonstrate that twisted graphene nanostrips of Möbius and similar geometries are highly promising nanostructures for chiral optical applications.

Enantioselective Labeling of Zebrafish for D-Phenylalanine Based on Graphene-Based Nanoplatform

Enantioselective labeling of important bioactive molecules in complex biological environments by artificial receptors has drawn great interest. From both the slight difference of enantiomers' physicochemical properties and inherently complexity in living organism point of view, it is still a contemporary challenge for preparing practical chiral device that could be employed in the model animal due to diverse biological interference. Herein, we introduce γ-cyclodextrin onto graphene oxide for fabricating γ-cyclodextrin and graphene oxide assemblies, which provided an efficient nanoplatform for chiral labelling of D-phenylalanine with higher chiral discrimination ratio of KD/KL = 8.21. Significantly, the chiral fluorescence quenching effect of this γ-CD-GO nanoplatform for D-phenylalanine enantiomer in zebrafish was 7.0-fold higher than L-isomer, which exhibiting real promise for producing practical enantio-differentiating graphene-based systems in a complex biological sample.

A Charge-Transfer-Induced Strategy for Enantioselective Discrimination by Potential-Regulated Surface-Enhanced Raman Scattering Spectroscopy

A simple and efficient enantioselective discrimination method, especially the chirality-label-free discrimination method, for the recognition of chiral small molecules with high resolution and wide applicability has been urgently desired. Herein, achiral Au/p-aminothiophenol (PATP) substrates were prepared to link the enantiomers via coupling reactions for constructing the enantioselective discrimination system. The resultant Au/PATP/enantiomer systems displayed charge-transfer (CT)-induced surface-enhanced Raman scattering (SERS) spectra that offered distinguishable information for the systems with different chirality. The differentiated spectral signal can be amplified by regulating the applied electrode potential, leading to great enantioselective discrimination performance. Moreover, the relationship between the discrimination performance and the potential-regulated CT process was revealed by SERS, which enabled an accurate and effective enantiomeric determination for various chiral molecules, including aromatic and aliphatic small molecules. The aliphatic molecule with the shorter chain was discriminated with a higher resolution, since the longer-chain molecule in the discrimination system may cause a change in the molecular electronic structure of the PATP. In addition, the aromatic chiral molecule can be distinguished easier than the aliphatic molecules, which means that the generation of the conjugation of electrons in the aromatic molecule-involved enantiomeric systems facilitates CT-induced SERS discrimination. Our work provides guidance for the design and development of an effective enantioselective discrimination strategy with high discrimination performance in diverse application fields.

Enantioseparation/Recognition based on nano techniques/materials

Enantiomers show different behaviors in interaction with the chiral environment. Due to their identical chemical structure and their wide application in various industries, such as agriculture, medicine, pesticide, food, and so forth, their separation is of great importance. Today, the term "nano" is frequently encountered in all fields. Technology and measuring devices are moving towards miniaturization, and the usage of nanomaterials in all sectors is expanding substantially. Given that scientists have recently attempted to apply miniaturized techniques known as nano-liquid chromatography/capillary-liquid chromatography, which were originally accomplished in 1988, as well as the widespread usage of nanomaterials for chiral resolution (back in 1989), this comprehensive study was developed. Searching the terms "nano" and "enantiomer separation" on scientific websites such as Scopus, Google Scholar, and Web of Science yields articles that either use miniaturized instruments or apply nanomaterials as chiral selectors with a variety of chemical and electrochemical detection techniques, which are discussed in this article.

Fluorine-based Zn salan complexes

We synthesised and characterised the racemic and chiral versions of two Zn salan fluorine-based complexes from commercially available materials. The complexes are susceptible to absorbing H₂O from the atmosphere. In solution (DMSO-H₂O) and at the millimolar level, experimental and theoretical studies identify that these complexes exist in a dimeric-monomeric equilibrium. We also investigated their ability to sense amines via¹⁹F NMR. In CDCl₃ or d⁶-DMSO, strongly coordinating molecules (H₂O or DMSO) are the limiting factor in using these easy-to-make complexes as chemosensory platforms since their exchange with analytes requires an extreme excess of the latter.

A review on chiral metal-organic frameworks: synthesis and asymmetric applications

Chiral metal-organic frameworks (CMOFs) have the characteristics of framework structure diversity and functional tunability, and have important applications in the fields of chiral identification, separation of enantiomers and asymmetric catalysis. In recent years, the application of CMOFs has also been extended to other research fields, such as circularly polarized fluorescence and chiral ferroelectrics. Compared with achiral MOFs, the design of CMOFs only considers the modes of introduction of chirality, and also takes into account the crystallization and purification. Therefore, the synthesis and characterization of CMOFs face many difficult challenges. This review discusses three effective strategies for constructing CMOFs, including direct synthesis of chiral ligands, spontaneous resolution of achiral ligands or chiral template-induced synthesis, and post-synthetic chiralization of achiral MOFs. In addition, this review also discusses the recent application progress of CMOFs in chiral molecular recognition, enantiomer separation, asymmetric catalysis, circularly polarized fluorescence, and chiral ferroelectrics.

Bipolar electrochemical rotors for the direct transduction of molecular chiral information

Efficient monitoring of chiral information of bioactive compounds has gained considerable attention, due to their involvement in different biochemical processes. In this work, we propose a novel dynamic system for the easy and straightforward recognition of chiral redox active molecules and its possible use for the efficient measurement of enantiomeric excess in solution. The approach is based on the synergy between the localized enantioselective oxidation of only one of the two antipodes of a chiral molecule and the produced charge-compensating asymmetric proton flux along a bipolar electrode. The resulting clockwise or anticlockwise rotation is triggered only when the probe with the right chirality is present in solution. The angle of rotation shows a linear correlation with the analyte concentration, enabling the quantification of enantiomeric ratios in mixtures where the two antipodes are present in solution. This device was successfully used to simultaneously measure different ratios of the enantiomers of 3,4-dihydroxyphenylalanine and tryptophan. The versatility of the proposed approach opens up the possibility to use such a dynamic system as a straightforward (bio)analytical tool for the qualitative and quantitative discrimination of different redox active chiral probes.

Rational design of highly enantioselective composite voltammetric sensors using a computationally predicted chiral modifier

The use of chiral modifiers is among the simplest and most popular strategies for synthesizing enantioselective voltammetric sensors that are applied for the analysis and discrimination of enantiomerical drugs in various media. The type and structure of the chiral modifier are the key factors for the creation of enantioselectivity to a specified analyte. We suggest a novel approach to the prediction of the quality of a chiral modifier for preparing highly enantioselective sensors. The suggested approach is based on the molecular mechanics modeling of the adsorption of analyte enantiomers on chiral modifiers and on the comparison of the corresponding adsorption energies (ΔE_ads ). The efficiency of our approach is demonstrated using the example of cyclodextrins and chiral single-wall carbon nanotubes as chiral modifiers, and a wide range of chiral analytes. We found that the experimental enantioselectivity (ϑ_exp ) measured using voltammetry linearly correlates with ΔE_ads . The suggested approach also showed good predictive power in application to enantioselective chromatography, which further validates its general applicability.

Nanomaterials-enriched sensors for detection of chiral pharmaceuticals

Advancements in nanoscience and nanotechnology have opened new pathways to fabricate novel nanostructures with interesting properties that would be used for different applications. In this respect, nanostructures comprising chirality are one of the most rapidly developing research fields encompassing chemistry, physics and biology. Chirality, also known as mirror asymmetry, describes the geometrical property of an object that is not superimposable on its mirror image. This characteristic plays a crucial role because these identical forms of chiral species in pharmaceuticals or food additives may exhibit different effects on living organisms. Therefore, chiral analysis is an important field of modern chemical analysis in health-related industries that are reliant on the production of enantiomeric compounds involving pharmaceuticals. This review covers the recent advances dealing with the synthesis, design and advantageous analytical performance of nanomaterials-enriched sensors used for chiral pharmaceuticals. We conclude this review with the challenges existing in this research field and our perspectives on some potential strategies with cutting-edge approaches for the rational design of sensors for chiral pharmaceuticals. We expect this comprehensive review will inspire future studies in nanomaterials-enriched chiral sensors.

Chiral Selectors in Voltammetric Sensors Based on Mixed Phenylalanine/Alanine Cu(II) and Zn(II) Complexes

A practical application composite based on mixed chelate complexes [M(S-Ala)2(H2O)n]–[M(S-Phe)2(H2O)n] (M = Cu(II), Zn(II); n = 0–1) as chiral selectors in enantioselective voltammetric sensors was suggested. The structures of the resulting complexes were studied by XRD, ESI-MS, and IR- and NMR-spectroscopy methods. It was determined that enantioselectivity depends on the metal nature and on the structure of the mixed complex. The mixed complexes, which were suggested to be chiral selectors, were stable under the experimental conditions and provided greater enantioselectivity in the determination of chiral analytes, such as naproxen and propranolol, in comparison with the amino acids they comprise. The best results shown by the mixed copper complex [Cu(S-Ala)2]–[Cu(S-Phe)2] were: ipS/ipR = 1.27 and ΔEp = 30 mV for Nap; and ipS/ipR = 1.37 and ΔEp = 20 mV for Prp. The electrochemical and analytical characteristics of the sensors and conditions of voltammogram recordings were studied by differential pulse voltammetry. Linear relationships between the anodic current and the concentrations of Nap and Prp enantiomers were achieved in the range of 2.5 × 10−5 to 1.0 × 10−3 mol L−1 for GCE/PEC-[Cu(S-Ala)2]–[Cu(S-Phe)2] and 5.0 × 10−5 to 1.0 × 10−3 for GCE/PEC–[Zn(S-Ala)2(H2O)]–[Zn(S-Phe)2(H2O)], with detection limits (3 s/m) of 0.30–1.24 μM. The suggested sensor was used to analyze Nap and Prp enantiomers in urine and plasma samples.

Chiral Recognition with Broad Selective Sensor Arrays

The detection and discrimination of chiral analytes has always been a topical theme in food and pharmaceutical industries and environmental monitoring, especially when dealing with chiral drugs and pesticides, whose enantiomeric nature assessment is of crucial importance. The typical approach matches novel chiral receptors designed ad hoc for the discrimination of a target enantiomer with emerging nanotechnologies. The massive synthetic efforts requested and the difficulty of analyzing complex matrices warrant the ever-growing exploitation of sensor array as an alternative route, using a limited number of chiral or both chiral and achiral sensors for the stereoselective identification and dosing of chiral compounds. This review aims to illustrate a little-explored winning strategy in chiral sensing based on sensor arrays. This strategy mimics the functioning of natural olfactory systems that perceive some couples of enantiomeric compounds as distinctive odors (i.e., using an array of a considerable number of broad selective receptors). Thus, fundamental concepts related to the working principle of sensor arrays and the role of data analysis techniques and models have been briefly presented. After the discussion of existing examples in the literature using arrays for discriminating enantiomers and, in some cases, determining the enantiomeric excess, the remaining challenges and future directions are outlined for researchers interested in chiral sensing applications.

Chiral Metal-Organic Frameworks

In the past two decades, metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) assembled from metal ions or clusters and organic linkers via metal-ligand coordination bonds have captivated significant scientific interest on account of their high crystallinity, exceptional porosity, and tunable pore size, high modularity, and diverse functionality. The opportunity to achieve functional porous materials by design with promising properties, unattainable for solid-state materials in general, distinguishes MOFs from other classes of materials, in particular, traditional porous materials such as activated carbon, silica, and zeolites, thereby leading to complementary properties. Scientists have conducted intense research in the production of chiral MOF (CMOF) materials for specific applications including but not limited to chiral recognition, separation, and catalysis since the discovery of the first functional CMOF (i.e., d- or l-POST-1). At present, CMOFs have become interdisciplinary between chirality chemistry, coordination chemistry, and material chemistry, which involve in many subjects including chemistry, physics, optics, medicine, pharmacology, biology, crystal engineering, environmental science, etc. In this review, we will systematically summarize the recent progress of CMOFs regarding design strategies, synthetic approaches, and cutting-edge applications. In particular, we will highlight the successful implementation of CMOFs in asymmetric catalysis, enantioselective separation, enantioselective recognition, and sensing. We envision that this review will provide readers a good understanding of CMOF chemistry and, more importantly, facilitate research endeavors for the rational design of multifunctional CMOFs and their industrial implementation.

Chiral carbon dots: synthesis, optical properties, and emerging applications

Carbon dots are luminescent carbonaceous nanoparticles that can be endowed with chiral properties, making them particularly interesting for biomedical applications due to their low cytotoxicity and facile synthesis. In recent years, synthetic efforts leading to chiral carbon dots with other attractive optical properties such as two-photon absorption and circularly polarized light emission have flourished. We start this review by introducing examples of molecular chirality and its origins and providing a summary of chiroptical spectroscopy used for its characterization. Then approaches used to induce chirality in nanomaterials are reviewed. In the main part of this review we focus on chiral carbon dots, introducing their fabrication techniques such as bottom-up and top-down chemical syntheses, their morphology, and optical/chiroptical properties. We then consider emerging applications of chiral carbon dots in sensing, bioimaging, and catalysis, and conclude this review with a summary and future challenges.

Amplifying inorganic chirality using liquid crystals

Chiral inorganic nanostructures have drawn extensive attention thanks to their unique physical properties as well as multidisciplinary applications. Amplifying inorganic chirality using liquid crystals (LCs) is an efficient way to enhance the parented inorganic asymmetry owing to chirality transfer. Herein, the universal synthetic methods and structural characterizations of chiral inorganic-doped LC hybrids are introduced. Additionally, the current progress and status of recent experiment and theory research about chiral interactions between inorganic nanomaterials (e.g. metal, semiconductor, perovskite, and magnetic oxide) and LCs are summarized in this review. We further present representative applications of these new hybrids in the area of encryption, sensing, optics, etc. Finally, we provide perspectives on this field in terms of material variety, new synthesis, and future practice. It is envisaged that LCs will act as a pivotal part in the amplification of inorganic chirality with versatile applications.

Electrochemiluminescent enantioselective detection with chiral-imprinted mesoporous metal surfaces

Chiral-imprinted mesoporous Pt-Ir alloy surfaces were combined in a synergetic way with electrochemiluminescence (ECL) to detect the two enantiomers of phenylalanine (PA) as a model compound, acting simultaneously as a...

Assembly of pinwheel/twist-shaped chiral lanthanide clusters with rotor structures by an annular/linear growth mechanism and their magnetic properties

This is the first time that an annular/linear growth mechanism has been proposed for the directional construction of lanthanide clusters with specific shapes.

Research and Application of Highly Selective Molecular Imprinting Technology in Chiral Separation Analysis

Since residual chiral pollutants in the environment and toxic or ineffective chiral components in drugs can threat human health, there is an urgent need for methods to separation and analyze chiral molecules. Molecular imprinting technology (MIT) is a biomimetic technique for specific recognition of analytes with high potential for application in the field of chiral separation and analysis. However, since MIT has some disadvantages when used for chiral recognition, such as poor rigidity of imprinted materials, a single type of recognition site, and poor stereoselectivity, reducing the interference of conformationally and structurally similar substances to increase the efficiency of chiral recognition is difficult. Therefore, improving the rigidity of imprinted materials, increasing the types of imprinted cavity recognition sites, and constructing an imprinted microenvironment for highly selective chiral recognition are necessary for the accurate identification of chiral substances. In this article, the principle of chiral imprinting recognition is introduced, and various strategies that improve the selectivity of chiral imprinting, using derivative functional monomers, supramolecular compounds, chiral assembly materials, and biomolecules, are reviewed in the past 10 years.

Chiral fluorescence recognition of glutamine enantiomers by a modified Zr-based MOF based on solvent-assisted ligand incorporation

In this study, three types of chiral fluorescent zirconium-based metal-organic framework materials were synthesized using l-dibenzoyl tartaric acid as the chiral modifier by the solvent-assisted ligand incorporation method, which was the porous coordination network yellow material, denoted as PCN-128Y. PCN-128Y-1 and PCN-128Y-2 featured unique chiral selectivity for the Gln enantiomers amongst seven acids and the highly stable luminescence property, which were caused by the heterochiral interaction and aggregation-induced emission. Furthermore, a rapid fluorescence method for the chiral detection of glutamine (Gln) enantiomers was developed. The homochiral crystals of PCN-128Y-1 displayed enantiodiscrimination in the quenching by d-Gln such that the ratio of enantioselectivity was 2.0 in 30 seconds at pH 7.0, according to the Stern-Volmer quenching plots. The detection limits of d- and l-Gln were 6.6 × 10-4 mol L-1 and 3.3 × 10-4 mol L-1, respectively. Finally, both the maximum adsorption capacities of PCN-128Y-1 for the Gln enantiomers (Q e(l-Gln) = 967 mg g-1; Q e(d-Gln) = 1607 mg g-1) and the enantiomeric excess value (6.2%) manifested that PCN-128Y-1 had strong adsorption capacity for the Gln enantiomers and higher affinity for d-Gln.

Chiral Recognition on Bare Gold Surfaces by Quartz Crystal Microbalance

Quartz crystal microbalance (QCM) is one of the powerful tools for the studies of molecular recognition and chiral discrimination. Its efficiency mainly relies on the design of the functional sensitive layer on the electrode surface. However, the organic sensitive layer may easily cause dissipation of oscillation or detachment and weaken the signal transfer during the molecular recognition processes. In this work, we reveal for the first time that the bare metal surface without the organic selector layer has the capability for chiral recognition in the QCM system. During the adsorption of various chiral amino acids, relatively higher selectivity of D-enantiomers on gold (Au) surface was shown by the QCM detection. Based on analyses of the surface crystalline structure and density functional theory calculations, we demonstrate that the chiral nature of Au surface plays an important role in the selective binding of specific D-amino acids. These results may open new insights on chiral detection by QCM system. It will also promote the construction of novel chiral sensing systems with both efficient detection and separation capability.

Target -responsive host-guest binding-driven dual-sensing readout for enhanced electrochemical chiral analysis

Achieving efficient chiral discrimination by a convenient method remains a challenge in pharmaceutical and biotechnology industries. Our aim in this paper was to develop a dual-signaling enantioselective sensing strategy based on the competitive binding assay. A combination of β-cyclodextrin (β-CD) and methylene blue (MB) was used as an enantioselective discrimination probe to develop a straightforward electrochemical chiral sensor using the drug naproxen (R-and S-NaX) as the representative enantiomers. The principle relied on the difference between two enantiomers in the ability to replace a pre-binding redox probe, which in turn resulted in different dual signals for the two enantiomers. The applicability of the optimized procedure was demonstrated by the analysis of NaX enantiomers in the range of 0.4-6.0 μM. Featuring both signal-on and signal-off elements, the electrode presented significantly enhanced electrochemical activity with a low limit of detection (LOD) of 0.07 μM. We expect that our work will inspire interesting engineering strategies for developing novel enantioselective electrochemical sensors.

Effective enantiomeric identification of aromatic amines by tyrosine-modified pillar[5]arenes as chiral NMR solvating agents

Two novel tyrosine-modified pillar[5]arenes have been synthesized and applied as chiral NMR solvating agents to establish an efficient ¹H NMR method for enantioselective recognition and configuration assignment towards α-aromatic ethylamines.

Advancements of chiral molecularly imprinted polymers in separation and sensor fields: A review of the last decade

Since chiral recognition mechanism based on molecularly imprinted polymers immerged, it has assisted countless chemical and electrochemical analytical sample preparation techniques. It has done this by enhancing the enatioseparation abilities of these techniques. The preparation and optimization of chiral molecularly imprinted polymers (CMIPs) are two favored methods in the separation and sensor fields. This review aims to present an overview of advances in the preparation and application of CMIPs in analytical approaches in different available formats (eg. column, monolithic column, cartridge, membrane, nanomaterials, pipette tip and stir bar sorptive) over the last decade. In addition, progress in the preparation and development of CMIPs-based sensor fields have been also discussed. Finally, the main application challenges of CMIPs are also summarily explained, as well as upcoming prospects in the field.

Application of chiral chromatography in radiopharmaceutical fields: A review

Chiral column chromatography (CCC) is a revolutionary analytical methodology for the enantioseparation of novel positron emission tomography (PET) tracers in the primary stages of drug development. Due to the different behaviors of tracer enantiomers (e.g. toxicity, metabolism and side effects) in administrated subjects, their separation and purification is a challenging endeavor. Over the last three decades, different commercial chiral columns have been applied for the enantioseparation of PET-radioligand (PET-RL) or radiotracers (PET-RT), using high-performance liquid chromatography (HPLC). The categorization and reviewing of them is a vital topic. This review presents a brief overview of advances, applications, and future prospectives of CCC in radiopharmaceutical approaches. In addition, the effective chromatographic parameters and degravitation trends to enhance enantioseparation resolution are addressed. Moreover, the application and potential of chiral super fluidical chromatography (CSFC) as an alternative for enantioseparation in the field of radiopharmaceutical is discussed. Finally, the crucial application challenges of CCC are explained and imminent tasks are suggested.

The Application of Covalent Organic Frameworks for Chiral Chemistry

Covalent organic frameworks (COFs) made their debut in 2005 and caused enthusiastic attention because of their ordered, crystalline structure. They are constructed with pure organic building blocks that are linked together by robust covalent linkages. COFs are applied in numerous fields due to their large surface area, architecture and chemistry stabilities, functional pore walls, and tunable frameworks. Incorporating COFs with chiral compounds can build chiral COFs (CCOFs), which have exhibited significant advantages in the chiral chemistry field. This review focuses on the applications of COFs for chiral catalysis, chiral separation, and chiral sensoring up to now. Furthermore, the synthesis and design strategies of CCOFs are also discussed in this article, since the COFs used in chiral chemistry are generally CCOFs. There also sums up the benefits and defects of COFs used in the chiral field and outlines future opportunities. The studies described in this review demonstrate not only the advantages of COFs in practical use but also novel solutions for the problems in the chirality area.

Polydopamine/Silver Substrates Stemmed from Chiral Silica for SERS Differentiation of Amino Acid Enantiomers

Polydopamine (PDA) and silver (Ag) nanoparticles were first generated on chiral silica nanofibers and then detached from silica to form PDA/Ag composites. The as-obtained PDA/Ag showed surface-enhanced Raman scattering (SERS) activity but very weak circular dichroism optical activity. Interestingly, the PDA/Ag substrates could make a pair of tyrosine (or phenylalanine) enantiomers show different Raman scattering signal intensities, where the differences could reach 3 times. In contrast, PDA/Ag prepared by using racemic or achiral silica did not exhibit such discrimination performance. Therefore, this research offered a novel SERS-based enantiomeric differentiation method with the assistance of plasmonic metal-containing substrates stemmed from intrinsically chiral inorganic silica.

Supramolecular Chiral Discrimination of D-Phenylalanine Amino Acid Based on a Perylene Bisimide Derivative

The interaction between homochiral substituted perylene bisimide (PBI) molecule and the D enantiomer of phenylalanine amino acid was monitored. Spectroscopic transitions of PBI derivative in aqueous solution in the visible range were used to evaluate the presence of D-phenylalanine. UV-visible, fluorescence, FT-IR, and AFM characterizations showed that D-phenylalanine induces significant variations in the chiral perylene derivative aggregation state and the mechanism is enantioselective as a consequence of the 3D analyte structure. The interaction mechanism was further investigated in presence of interfering amino acid (D-serine and D-histidine) confirming that both chemical structure and its 3D structure play a crucial role for the amino acid discrimination. A D-phenylalanine fluorescence sensor based on perylene was proposed. A limit of detection (LOD) of 64.2 ± 0.38 nM was calculated in the range 10-7-10-5 M and of 1.53 ± 0.89 μM was obtained in the range 10-5 and 10-3 M.

Photoluminescence spectral broadening, chirality transfer and amplification of chiral perovskite materials (R-X-p-mBZA)2PbBr4 (X = H, F, Cl, Br) regulated by van der Waals and halogen atoms interactions

We introduced halogen-substituted chiral molecules as A-site cations to synthesize a series of novel organic–inorganic hybrid 2D chiral perovskite materials (R-X-p-mBZA)₂PbBr₄ (X = H, F, Cl, Br; p: para-position; mBZA = α-methylbenzylamine).