Influence of culture conditions on Escherichia coli O157:H7 biofilm formation by atomic force microscopy

Evaluation of extracellular polymeric substances matrix volume, surface roughness and bacterial adhesion property of oral biofilm

Background/purpose

Oral biofilms are highly structured bacterial colonies embedded in a highly hydrated extracellular polymeric substances (EPS) matrix. This study aimed to investigate the characteristics of oral biofilm at different stages of maturation.

Materials and methods

Oral multispecies biofilms were grown anaerobically from plaque bacteria on collagen coated hydroxyapatite discs in brain heart infusion broth for one and three weeks. The volume of live bacteria and EPS matrix of the biofilms were determined by using corresponding fluorescent probes and confocal laser scanning microscopy. Atomic force microscopy (AFM) was used to quantitatively probe and correlate cell surface adhesion force of biofilms. The surface roughness was quantified in terms of the root mean square average of the height deviations. Adhesion was measured from force-distance data for the retraction of the cell from the surface.

Results

The volume of live bacteria and EPS of 3-week-old biofilms was higher than 1-week-old biofilms. The surface roughness value in 1-week-old biofilms was significantly higher than that in 3-week-old biofilms. AFM force-distance curve results showed that the adhesion force at the cell-cell interface was significantly more at-tractive than those at bacterial cells surface of both stages biofilms. Adhesion forces between the AFM tip and the surface of bacterial cell were fairly constant, whereas the cell-cell interface experienced greater adhesion forces in the biofilm's development.

Conclusion

As oral biofilms become mature, EPS volume and cell-cell adhesion forces increase while the surface roughness decreases.

Nanomechanical changes in probiotic bacteria under antibiotics exposure: Implications on Lactobacillus biofilm formation

Recognition of the microbial cell's surface constituents' biophysical properties is an important research topic, allowing a better understanding of the cell's behaviour under different conditions. Atomic force microscopy (AFM) was employed in this study to analyse the basis of the nanomechanical changes in probiotic bacteria under nitrofurantoin, furazolidone, and nitrofurazone exposure. Recorded significant changes in the two Lactobacillus strains cells morphology, topography, and adhesion parameters resulted in the increase of the cells' longitude (up to 2.58 μm), profile height (by around 0.50 μm), and decrease in the adhesion force (up to 13.58 nN). Young's modulus and adhesion energy decreased within 96 h, however with no negative effect on the cells' morphology or loss of structural integrity. Observed modifications present the mode of action of the 5-nitrofuran derivative antibiotics on probiotic biofilm formation and suggest activation of the multilevel adaptation mechanisms to counteract unfavorable environments. A visual change in bacterial morphology such as an increased surface-to-volume ratio might be a link between molecular-level events and outcomes in individual cells and biofilms. This paper for the first time shows, that these antibiotics affect the properties of non-target microorganisms as lactobacilli, and might impair biofilm formation. However, the degree of such transformations depends on the delivered active substance.

Physiological characteristics, geochemical properties and hydrological variables influencing pathogen migration in subsurface system: What we know or not?

The global outbreak of coronavirus infectious disease-2019 (COVID-19) draws attentions in the transport and spread of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) in aerosols, wastewater, surface water and solid wastes. As pathogens eventually enter the subsurface system, e.g., soils in the vadose zone and groundwater in the aquifers, they might survive for a prolonged period of time owing to the uniqueness of subsurface environment. In addition, pathogens can transport in groundwater and contaminate surrounding drinking water sources, possessing long-term and concealed risks to human society. This work critically reviews the influential factors of pathogen migration, unravelling the impacts of pathogenic characteristics, vadose zone physiochemical properties and hydrological variables on the migration of typical pathogens in subsurface system. An assessment algorithm and two rating/weighting schemes are proposed to evaluate the migration abilities and risks of pathogens in subsurface environment. As there is still no evidence about the presence and distribution of SARS-CoV-2 in the vadose zones and aquifers, this study also discusses the migration potential and behavior of SARS-CoV-2 viruses in subsurface environment, offering prospective clues and suggestions for its potential risks in drinking water and effective prevention and control from hydrogeological points of view.

The Influence of Nutrient Medium Composition on Escherichia coli Biofilm Development and Heterologous Protein Expression

In the present study, the effects of different nutrient media on the development of Escherichia coli biofilms and the production of a heterologous protein were examined. E. coli JM109(DE3) cells transformed with pFM23 plasmid carrying the gene for enhanced green fluorescent protein (eGFP) expression were used. Cells were grown in two different culture media, Lysogenic Broth (LB) and M9ZB, in a flow cell system for 10 days. Epifluorescence microscopy, fluorimetry, and a high-performance liquid chromatography (HPLC) method based on hydrophobic interaction chromatography (HIC) were used to assess bacterial growth, plasmid copy number (PCN), and eGFP production in both planktonic and biofilm cells. The results showed that biofilm development was favored in M9ZB medium when compared with LB. However, the number of eGFP-expressing cells was higher in LB for both planktonic and sessile states (two-fold and seven-fold, respectively). In addition, the PCN in biofilm cells was slightly higher when using LB medium (on average, 29 plasmids per cell versus 20 plasmids per cell in M9ZB), and higher plasmid stability was observed in biofilms formed in LB compared to their planktonic counterparts. Hence, E. coli biofilms grown in LB enhanced both plasmid stability and capacity to produce the model heterologous protein when compared to M9ZB.

The Impact of Cultivation Media on the In Vitro Biofilm Biomass Production of Candida spp

The yeasts of the genus Candida are among the most clinically significant fungal pathogenic agents. One of the unique features of the Candida species' pathogenicity is their ability to form biofilms. Generally, infections caused by biofilm-forming microorganisms tend to have chronic course and are difficult to treat. This fact highlights the need to search for drugs with anti-biofilm activities. At present, there are variety of protocols for performing antifungal anti-biofilm activity testing in which fundamental differences, especially in the choice of cultivation media for biofilm formation, can be noted. In our study, we focused on the effect of four different culture media on biofilm biomass formation in ten Candida spp. strains. With emphasis placed on clinical significance, strains of the C. albicans species were predominantly included in this study. Based on our results, we can conclude that the availability of other components in the culture media, such as amino acids or proteins, and not just the commonly mentioned glucose availability, helps promote the transition of Candida yeasts into a sessile form and leads to in vitro robust biofilm formation. We revealed that biofilm formation in C. albicans strains was enhanced, especially in media supplemented with fetal bovine serum (FBS). The nutritionally balanced cultivation medium with 10 g/L glucose and 10% (v/v) FBS evidently showed the most significant benefit for in vitro biofilm production in C. albicans strains.

Modeling Quorum Sensing Dynamics and Interference on Escherichia coli

Bacteria control the expression of specific genes by Quorum Sensing (QS). This works using small signaling molecules called Autoinducers (AIs), for example, the Autoinducer-2 (AI-2). In this work, we present a mathematical model that represents the AI-2 dynamics on Escherichia coli, which is linked to the cell growth and the lsr operon expression. The model is adjusted using experimental data. Our results suggest that the extracellular AI-2 activity level depends on the cell growth rate, and this activity depends on the cell exponential growth phase. The model was adapted to simulate the interference of QS mechanisms in a co-culture of two E. coli strains: a wild type strain and a knock out strain that detects AI-2 but does not produce it. Co-culture simulations unveiled two conditions to avoid the QS on the wild strain: when the knock out takes control of the growth medium and overcomes the wild strain, or when is pre-cultured to its mid-exponential phase and then added to the wild strain culture. Model simulations unveiled new insights about the interference of bacterial communication and offer new tools for QS control.

Transcriptomic Analysis of Shiga Toxin-Producing Escherichia coli FORC_035 Reveals the Essential Role of Iron Acquisition for Survival in Canola Sprouts and Water Dropwort

Enterohemorrhagic Escherichia coli (EHEC) is a foodborne pathogen that poses a serious threat to humans. Although EHEC is problematic mainly in food products containing meat, recent studies have revealed that many EHEC-associated foodborne outbreaks were attributable to spoiled produce such as sprouts and green leafy vegetables. To understand how EHEC adapts to the environment in fresh produce, we exposed the EHEC isolate FORC_035 to canola spouts (Brassica napus) and water dropwort (Oenanthe javanica) and profiled the transcriptome of this pathogen at 1 and 3 h after incubation with the plant materials. Transcriptome analysis revealed that the expression of genes associated with iron uptake were down-regulated during adaptation to plant tissues. A mutant strain lacking entB, presumably defective in enterobactin biosynthesis, had growth defects in co-culture with water dropwort, and the defective phenotype was complemented by the addition of ferric ion. Furthermore, gallium treatment to block iron uptake inhibited bacterial growth on water dropwort and also hampered biofilm formation. Taken together, these results indicate that iron uptake is essential for the fitness of EHEC in plants and that gallium can be used to prevent the growth of this pathogen in fresh produce.

Escherichia coli O157:H7 and Salmonella Typhimurium adhesion to spinach leaf surfaces: Sensitivity to water chemistry and nutrient availability

This study investigated the effects of solution chemistry and growth conditions on bacterial deposition on spinach leaf surfaces using a parallel plate flow cell. Two food safety pathogens of concern and two non-pathogen bacterial surrogates (environmental E. coli isolates) were grown in ideal (LB media) and nutrient-restricted (M9 media) conditions. Bacterial attachment was quantified as mass transfer rate coefficients for cells suspended in 10 mM KCl, CaCl₂ and artificial groundwater, and cell and leaf surfaces were extensively characterized (zeta potential, hydrophobicity, extracellular polymer (EPS) composition). Between the pathogens, E. coli O157:H7 attachment was greater than that of Salmonella Typhimurium, attributed to measurable variability in cell surface charge and hydrophobicity. When grown in M9 media, both pathogens were significantly more adhesive to spinach surfaces (p < 0.01) than when grown in LB media. Surrogates did not follow this trend and showed minimal changes in adhesion kinetics and surface properties between growth conditions. EPS sugar/protein ratios were reduced in some of the highest attachment scenarios, suggesting that changes in EPS composition in favor of proteins may play a role. These results show the importance of growth conditions and solution complexities in understanding mechanisms of aqueous bacterial adhesion to food surfaces.

Towards standardized mechanical characterization of microbial biofilms: analysis and critical review

Developing reliable anti-biofilm strategies or efficient biofilm-based bioprocesses strongly depends on having a clear understanding of the mechanisms underlying biofilm development, and knowledge of the relevant mechanical parameters describing microbial biofilm behavior. Many varied mechanical testing methods are available to assess these parameters. The mechanical properties thus identified can then be used to compare protocols such as antibiotic screening. However, the lack of standardization in both mechanical testing and the associated identification methods for a given microbiological goal remains a blind spot in the biofilm community. The pursuit of standardization is problematic, as biofilms are living structures, i.e., both complex and dynamic. Here, we review the main available methods for characterizing the mechanical properties of biofilms through the lens of the relationship linking experimental testing to the identification of mechanical parameters. We propose guidelines for characterizing biofilms according to microbiological objectives that will help the reader choose an appropriate test and a relevant identification method for measuring any given mechanical parameter. The use of a common methodology for the mechanical characterization of biofilms will enable reliable analysis and comparison of microbiological protocols needed for improvement of engineering process and screening.

Phage "delay" towards enhancing bacterial escape from biofilms: a more comprehensive way of viewing resistance to bacteriophages

In exploring bacterial resistance to bacteriophages, emphasis typically is placed on those mechanisms which completely prevent phage replication. Such resistance can be detected as extensive reductions in phage ability to form plaques, that is, reduced efficiency of plating. Mechanisms include restriction-modification systems, CRISPR/Cas systems, and abortive infection systems. Alternatively, phages may be reduced in their “vigor” when infecting certain bacterial hosts, that is, with phages displaying smaller burst sizes or extended latent periods rather than being outright inactivated. It is well known, as well, that most phages poorly infect bacteria that are less metabolically active. Extracellular polymers such as biofilm matrix material also may at least slow phage penetration to bacterial surfaces. Here I suggest that such “less-robust” mechanisms of resistance to bacteriophages could serve bacteria by slowing phage propagation within bacterial biofilms, that is, delaying phage impact on multiple bacteria rather than necessarily outright preventing such impact. Related bacteria, ones that are relatively near to infected bacteria, e.g., roughly 10+ µm away, consequently may be able to escape from biofilms with greater likelihood via standard dissemination-initiating mechanisms including erosion from biofilm surfaces or seeding dispersal/central hollowing. That is, given localized areas of phage infection, so long as phage spread can be reduced in rate from initial points of contact with susceptible bacteria, then bacterial survival may be enhanced due to bacteria metaphorically “running away” to more phage-free locations. Delay mechanisms—to the extent that they are less specific in terms of what phages are targeted—collectively could represent broader bacterial strategies of phage resistance versus outright phage killing, the latter especially as require specific, evolved molecular recognition of phage presence. The potential for phage delay should be taken into account when developing protocols of phage-mediated biocontrol of biofilm bacteria, e.g., as during phage therapy of chronic bacterial infections.

Interfacial separation of a mature biofilm from a glass surface - A combined experimental and cohesive zone modelling approach

A good understanding of the mechanical stability of biofilms is essential for biofouling management, particularly when mechanical forces are used. Previous biofilm studies lack a damage-based theoretical model to describe the biofilm separation from a surface. The purpose of the current study was to investigate the interfacial separation of a mature biofilm from a rigid glass substrate using a combined experimental and numerical modelling approach. In the current work, the biofilm-glass interfacial separation process was investigated under tensile and shear stresses at the macroscale level, known as modes I and II failure mechanisms respectively. The numerical simulations were performed using a Finite Volume (FV)-based simulation package (OpenFOAM®) to predict the separation initiation using the cohesive zone model (CZM). Atomic force microscopy (AFM)-based retraction curve was used to obtain the separation properties between the biofilm and glass colloid at microscale level, where the CZM parameters were estimated using the Johnson-Kendall-Roberts (JKR) model. In this study CZM is introduced as a reliable method for the investigation of interfacial separation between a biofilm and rigid substrate, in which a high local stress at the interface edge acts as an ultimate stress at the crack tip.This study demonstrated that the total interfacial failure energy measured at the macroscale, was significantly higher than the pure interfacial separation energy obtained by AFM at the microscale, indicating a highly ductile deformation behaviour within the bulk biofilm matrix. The results of this study can significantly contribute to the understanding of biofilm detachments.

A quantitative study on the formation of Pseudomonas aeruginosa biofilm

Biofilms are bacterial cells in a matrix of extracellular polymeric substance. The formation of biofilm depends on the microenvironment. In this study, the effect of temperature on Pseudomonas aeruginosa biofilm formation was evaluated with respect to three parameters-the mass of biofilm formed, the production of extracellular polysaccharide and the adhesion force. The results indicate that biofilm biomass (2.8, A590), extracellular polysaccharide production (1240 ± 40 µg) and adhesion force (10.8 ± 0.2 nN) were highest at 37°C. The results also suggest that biofilms formed at 37°C would have a higher mechanical stability (than biofilms grown at 28, 33 and 42°C).

Biofilm formation by Borrelia burgdorferi sensu lato

Bacterial biofilms are microbial communities held together by an extracellular polymeric substance matrix predominantly composed of polysaccharides, proteins and nucleic acids. We had previously shown that Borrelia burgdorferi sensu stricto, the causative organism of Lyme disease in the United States is capable of forming biofilms in vitro. Here, we investigated biofilm formation by B. afzelii and B. garinii, which cause Lyme disease in Europe. Using various histochemistry and microscopy techniques, we show that B. afzelii and B. garinii form biofilms, which resemble biofilms formed by B. burgdorferi sensu stricto. High-resolution atomic force microscopy revealed similarities in the ultrastructural organization of the biofilms form by three Borrelia species. Histochemical experiments revealed a heterogeneous organization of exopolysaccharides among the three Borrelia species. These results suggest that biofilm formation might be a common trait of Borrelia genera physiology.

Mechanical properties of a mature biofilm from a wastewater system: from microscale to macroscale level

A fundamental understanding of biofilm mechanical stability is critical in order to describe detachment and develop biofouling control strategies. It is thus important to characterise the elastic deformation and flow behaviour of the biofilm under different modes of applied force. In this study, the mechanical properties of a mature wastewater biofilm were investigated with methods including macroscale compression and microscale indentation using atomic force microscopy (AFM). The mature biofilm was found to be mechanically isotropic at the macroscale level as its mechanical properties did not depend on the scales and modes of loading. However, the biofilm showed a tendency for mechanical inhomogeneity at the microscale level as indentation progressed deeper into the matrix. Moreover, it was observed that the adhesion force had a significant influence on the elastic properties of the biofilm at the surface, subjected to microscale tensile loading. These results are expected to inform a damage-based model for biofilm detachment.

Rapid efficient synthesis and characterization of silver, gold, and bimetallic nanoparticles from the medicinal plant Plumbago zeylanica and their application in biofilm control

BACKGROUND

Nanoparticles (NPs) have gained significance in medical fields due to their high surface-area-to-volume ratio. In this study, we synthesized NPs from a medicinally important plant - Plumbago zeylanica.

MATERIALS AND METHODS

Aqueous root extract of P. zeylanica (PZRE) was analyzed for the presence of flavonoids, sugars, and organic acids using high-performance thin-layer chromatography (HPTLC), gas chromatography-time of flight-mass spectrometry (GC-TOF-MS), and biochemical methods. The silver NPs (AgNPs), gold NPs (AuNPs), and bimetallic NPs (AgAuNPs) were synthesized from root extract and characterized using ultraviolet-visible spectra, X-ray diffraction (XRD), energy-dispersive spectrometry (EDS), transmission electron microscopy (TEM), and dynamic light scattering (DLS). The effects of these NPs on Acinetobacter baumannii, Staphylococcus aureus, and Escherichia coli biofilms were studied using quantitative biofilm inhibition and disruption assays, as well as using fluorescence, scanning electron microscopy, and atomic force microscopy.

RESULTS

PZRE showed the presence of phenolics, such as plumbagin, and flavonoids, in addition to citric acid, sucrose, glucose, fructose, and starch, using HPTLC, GC-TOF-MS, and quantitative analysis. Bioreduction of silver nitrate (AgNO₃) and chloroauric acid (HAuCl₄) were confirmed at absorbances of 440 nm (AgNPs), 570 nm (AuNPs), and 540 nm (AgAuNPs), respectively. The maximum rate of synthesis at 50°C was achieved with 5 mM AgNO₃ within 4.5 hours for AgNPs; and with 0.7 mM HAuCl4 within 5 hours for AuNPs. The synthesis of AgAuNPs, which completed within 90 minutes with 0.7 mM AgNO₃ and HAuCl₄, was found to be the fastest. Fourier-transform infrared spectroscopy confirmed bioreduction, while EDS and XRD patterns confirmed purity and the crystalline nature of the NPs, respectively. TEM micrographs and DLS showed about 60 nm monodispersed Ag nanospheres, 20-30 nm Au nanospheres adhering to form Au nanotriangles, and about 90 nm hexagonal blunt-ended AgAuNPs. These NPs also showed antimicrobial and antibiofilm activity against E. coli, A. baumannii, S. aureus, and a mixed culture of A. baumannii and S. aureus. AgNPs inhibited biofilm in the range of 96%-99% and AgAuNPs from 93% to 98% in single-culture biofilms. AuNPs also showed biofilm inhibition, with the highest of 98% in S. aureus. AgNPs also showed good biofilm disruption, with the highest of 88% in A. baumannii.

CONCLUSION

This is the first report on rapid and efficient synthesis of AgNPs, AuNPs and AgAuNPs from P. zeylanica and their effect on quantitative inhibition and disruption of bacterial biofilms.

On the influence of the culture conditions in bacterial antifouling bioassays and biofilm properties: Shewanella algae, a case study

Background

A variety of conditions (culture media, inocula, incubation temperatures) are employed in antifouling tests with marine bacteria. Shewanella algae was selected as model organism to evaluate the effect of these parameters on: bacterial growth, biofilm formation, the activity of model antifoulants, and the development and nanomechanical properties of the biofilms.

The main objectives were:

1) To highlight and quantify the effect of these conditions on relevant parameters for antifouling studies: biofilm morphology, thickness, roughness, surface coverage, elasticity and adhesion forces.

2) To establish and characterise in detail a biofilm model with a relevant marine strain.

Results

Both the medium and the temperature significantly influenced the total cell densities and biofilm biomasses in 24-hour cultures. Likewise, the IC₅₀ of three antifouling standards (TBTO, tralopyril and zinc pyrithione) was significantly affected by the medium and the initial cell density. Four media (Marine Broth, MB; 2% NaCl Mueller-Hinton Broth, MH2; Luria Marine Broth, LMB; and Supplemented Artificial Seawater, SASW) were selected to explore their effect on the morphological and nanomechanical properties of 24-h biofilms. Two biofilm growth patterns were observed: a clear trend to vertical development, with varying thickness and surface coverage in MB, LMB and SASW, and a horizontal, relatively thin film in MH2. The Atomic Force Microscopy analysis showed the lowest Young modulii for MB (0.16 ± 0.10 MPa), followed by SASW (0.19 ± 0.09 MPa), LMB (0.22 ± 0.13 MPa) and MH2 (0.34 ± 0.16 MPa). Adhesion forces followed an inverted trend, being higher in MB (1.33 ± 0.38 nN) and lower in MH2 (0.73 ± 0.29 nN).

Conclusions

All the parameters significantly affected the ability of S. algae to grow and form biofilms, as well as the activity of antifouling molecules. A detailed study has been carried out in order to establish a biofilm model for further assays. The morphology and nanomechanics of S. algae biofilms were markedly influenced by the nutritional environments in which they were developed. As strategies for biofilm formation inhibition and biofilm detachment are of particular interest in antifouling research, the present findings also highlight the need for a careful selection of the assay conditions.

Effects of antibacterial agents and drugs monitored by atomic force microscopy

Originally invented for topographic imaging, atomic force microscopy (AFM) has evolved into a multifunctional biological toolkit, enabling to measure structural and functional details of cells and molecules. Its versatility and the large scope of information it can yield make it an invaluable tool in any biologically oriented laboratory, where researchers need to perform characterizations of living samples as well as single molecules in quasi-physiological conditions and with nanoscale resolution. In the last 20 years, AFM has revolutionized the characterization of microbial cells by allowing a better understanding of their cell wall and of the mechanism of action of drugs and by becoming itself a powerful diagnostic tool to study bacteria. Indeed, AFM is much more than a high-resolution microscopy technique. It can reconstruct force maps that can be used to explore the nanomechanical properties of microorganisms and probe at the same time the morphological and mechanical modifications induced by external stimuli. Furthermore it can be used to map chemical species or specific receptors with nanometric resolution directly on the membranes of living organisms. In summary, AFM offers new capabilities and a more in-depth insight in the structure and mechanics of biological specimens with an unrivaled spatial and force resolution. Its application to the study of bacteria is extremely significant since it has already delivered important information on the metabolism of these small microorganisms and, through new and exciting technical developments, will shed more light on the real-time interaction of antimicrobial agents and bacteria.

The significance of calcium ions on Pseudomonas fluorescens biofilms - a structural and mechanical study

The purpose of this study was to investigate the effects of calcium ions on the structural and mechanical properties of Pseudomonas fluorescens biofilms grown for 48 h. Advanced investigative techniques such as confocal laser scanning microscopy and atomic force spectroscopy were employed to characterize biofilm structure as well as biofilm mechanical properties following growth at different calcium concentrations. The presence of calcium during biofilm development led to higher surface coverage with distinct structural phenotypes in the form of a granular and heterogeneous surface, compared with the smoother and homogeneous biofilm surface in the absence of calcium. The presence of calcium also increased the adhesive nature of the biofilm, while reducing its elastic properties. These results suggest that calcium ions could have a functional role in biofilm development and have practical implications, for example, in analysis of biofouling in membrane-based water-treatment processes such as nanofiltration or reverse osmosis where elevated calcium concentrations may occur at the solid-liquid interface.

Characterization of curli A production on living bacterial surfaces by scanning probe microscopy

Curli are adhesive surface fibers produced by many Enterobacteriaceae, such as Escherichia coli and Salmonella enterica. They are implicated in bacterial attachment and invasion to epithelial cells. In this study, atomic force microscopy was used to determine the effects of curli on topology and mechanical properties of live E. coli cells. Young's moduli of both curli-deficient and curli-overproducing mutants were significantly lower than that of their wild-type (WT) strain, while decay lengths of the former strains were higher than that of the latter strain. Surprisingly, topological images showed that, unlike the WT and curli-overproducing mutant, the curli-deficient mutant produced a large number of flagella-like fibers, which may explain why the strain had a lower Young's modulus than the WT. These results suggest that the mechanical properties of bacterial surfaces are greatly affected by the presence of filamentous structures such as curli and flagella.

Detection of biofilm-grown Aspergillus fumigatus by means of atomic force spectroscopy: ultrastructural effects of alginate lyase

Aspergillus fumigatus has become a leading cause of fungal morbidity and mortality, especially in immunocompromised patients. This fungus is able to grow as a multicellular community and produce a hydrophobic extracellular matrix (ECM), mainly composed of galactomannan and α-1,3 glucans, to protect itself from host defenses and antimicrobial drugs. This matrix envelops the fungus hyphae, binding them into a contiguous sheath on the colony surface, forming a biofilm and increasing the fungal resistance to adverse environmental factors. Adherence to host cells and resistance to physical removal play a key role in fungal colonization and invasion of the host and in a wide range of infections. Here we show that, by using atomic force spectroscopy, it is possible to exploit the peculiar hydrophobicity of the biofilm components (i.e., cell walls, ECM) to detect the biofilm spread, its growth, and lysis on rough surfaces. By means of this approach, we demonstrate that alginate lyase, an enzyme known to reduce negatively charged alginate levels in microbial biofilms, reduces the biofilm adhesion forces suggesting a loss of ECM from the biofilm, which could be used to enhance pharmacological treatments.

Nanoscopic analysis on pH induced morphological changes of flagella in Escherichia coli

BACKGROUND AND PURPOSE

Flagella contribute to the virulence of pathogenic bacteria through chemotaxis, motility, and adhesion. Understanding the various functions of flagella may provide insight into mechanisms of bacterial infection and transmission. The objectives of our study were to apply biophysical and biochemical methods to investigate the mechanisms of pH-dependent changes in flagella functions.

METHODS

Atomic force microscopy (AFM) was used to analyze the flagellum morphology of Escherichia coli cultured in various pH conditions. The swarming plate method was used to identify pH-dependent changes in bacterial motility. Western blot analysis and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) were also carried out to study pH-dependent expression and structural changes of flagellin C.

RESULTS

E coli cultured at pH 7 produced the flagella with the greatest average length and diameter. When the bacteria were grown at pH 6 or pH 8, shorter and thinner forms of flagella were produced. The morphology of the flagella was correlated to the bacterial motility. While western blot analysis showed only a slight change in the expression of the flagellin C protein in response to changes in the pH of the culture medium, ATR-FTIR showed significant pH-dependent changes in the secondary structure of the flagellin C assembled in sheared flagella.

CONCLUSION

Our results show that both acidification and alkalization of the culture medium restricted bacterial motility, and indicate that the reduced motility may be caused by incorrect assembly of the flagellum proteins.

Role of rpoS in Escherichia coli O157:H7 strain H32 biofilm development and survival

The protein RpoS is responsible for mediating cell survival during the stationary phase by conferring cell resistance to various stressors and has been linked to biofilm formation. In this study, the role of the rpoS gene in Escherichia coli O157:H7 biofilm formation and survival in water was investigated. Confocal scanning laser microscopy of biofilms established on coverslips revealed a nutrient-dependent role of rpoS in biofilm formation, where the biofilm biomass volume of the rpoS mutant was 2.4- to 7.5-fold the size of its rpoS(+) wild-type counterpart in minimal growth medium. The enhanced biofilm formation of the rpoS mutant did not, however, translate to increased survival in sterile double-distilled water (ddH(2)O), filter-sterilized lake water, or unfiltered lake water. The rpoS mutant had an overall reduction of 3.10 and 5.30 log(10) in sterile ddH(2)O and filter-sterilized lake water, respectively, while only minor reductions of 0.53 and 0.61 log(10) in viable counts were observed for the wild-type form in the two media over a 13-day period, respectively. However, the survival rates of the detached biofilm-derived rpoS(+) and rpoS mutant cells were comparable. Under the competitive stress conditions of unfiltered lake water, the advantage conferred by the presence of rpoS was lost, and both the wild-type and knockout forms displayed similar declines in viable counts. These results suggest that rpoS does have an influence on both biofilm formation and survival of E. coli O157:H7 and that the advantage conferred by rpoS is contingent on the environmental conditions.

Aqueous two-phase system-derived biofilms for bacterial interaction studies

We describe patterning of bacterial biofilms using polymer-based aqueous two-phase system (ATPS) microprinting protocols. The fully aqueous but selectively bacteria-partitioning nature of the ATPS allows spatially distinct localization of suspensions of bacteria such as Pseudomonas aeruginosa and Escherichia coli with high precision. The ATPS patterned bacterial suspensions form spatially distinct biofilms over time. Due to the fully aqueous and gentle noncontact printing procedures employed, coculture biofilms composed of multiple types of bacteria could be printed not only adjacent to each other but also directly over another layer of existing biofilm. In addition, the ATPS environment also allows free diffusion of small molecules between spatially distinct and localized bacterial suspensions and biofilms. This enables biofilms to chemically affect or be affected by neighboring biofilms or planktonic cells, even if they consist of different strains or species. We show that a β-lactamase producing biofilm confers ampicillin resistance to neighboring nonresistant planktonic cells, as seen by a 3,600-fold increase in survival of the ampicillin-sensitive strain. These examples demonstrate the ability of ATPS-based biofilm patterning methods to enable unique studies on commensalistic effects between bacterial species.

Intracellularly grown gold nanoislands as SERS substrates for monitoring chromate, sulfate and nitrate localization sites in remediating bacteria biofilms by Raman chemical imaging

Understanding the chemical composition of biofilm matrices is vital in different fields of biology such as surgery, dental medicine, synthetic grafts and bioremediation. The knowledge of biofilm development, composition, active reduction sites and remediation efficacy will help in the development of effective solutions and evaluation of remediating approaches prior to implementation. Surface-enhanced Raman spectroscopy (SERS) based imaging is an invaluable tool to obtain an understanding of the remediating efficacy of microorganisms and its role in the formation of organic and inorganic compounds in biofilms. We demonstrate for the first time, the presence of chromate, sulfate, nitrate and reduced trivalent chromium in soil biofilms. In addition, we demonstrate that SERS imaging was able to validate two observations made by previous studies on chromate/sulfate and chromate/nitrate interactions in Shewanella oneidensis MR-1 biofilms. Additionally, we show a detailed Raman mapping based evidence of the existence of chromate-sulfate competition for cellular entry. Subsequently, we use Raman mapping to study the effect of nitrate on chromate reduction. The findings presented in this paper are among the first to report - detection of multiple metallic ions in bacterial biofilms using intracellular SERS substrates. Such a detailed characterization of biofilms using gold nanoislands based SERS mapping substrate can be extended to study cellular localization of other metallic ions and chemical species of biological and toxicological significance and their effect on reduction reactions in bacterial biofilms.

In vitro biofilm forming potential of Streptococcus suis isolated from human and swine in China

Streptococcus suis is a swine pathogen and also a zoonotic agent. The formation of biofilms allows S. suis to become persistent colonizers and resist clearance by the host immune system and antibiotics. In this study, biofilm forming potentials of various S. suis strains were characterized by confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM) and tissue culture plates stained with crystal violet. In addition, the effects of five antimicrobial agents on biofilm formation were assayed in this study. S. suis produced biofilms on smooth and rough surface. The nutritional contents including glucose and NaCl in the growth medium modulated biofilm formation. There was a significant difference in their biofilm-forming ability among all 46 S. suis strains. The biofilm-forming potential of S. suis serotype 9 was stronger than type 2 and all other types. However, biofilm formation was inhibited by five commonly used antimicrobial agents, penicillin, erythromycin, azithromycin, ciprofloxacin, and ofloxacin at subinhibitory concentrations, among which inhibition of ciprofloxacin and ofloxacin was stronger than that of other three antimicrobial agents.Our study provides a detailed analysis of biofilm formation potential in S. suis, which is a step towards understanding its role in pathogenesis, and eventually lead to a better understanding of how to eradicate S. suis growing as biofilms with antibiotic therapy.

RssAB signaling coordinates early development of surface multicellularity in Serratia marcescens

Bacteria can coordinate several multicellular behaviors in response to environmental changes. Among these, swarming and biofilm formation have attracted significant attention for their correlation with bacterial pathogenicity. However, little is known about when and where the signaling occurs to trigger either swarming or biofilm formation. We have previously identified an RssAB two-component system involved in the regulation of swarming motility and biofilm formation in Serratia marcescens. Here we monitored the RssAB signaling status within single cells by tracing the location of the translational fusion protein EGFP-RssB following development of swarming or biofilm formation. RssAB signaling is specifically activated before surface migration in swarming development and during the early stage of biofilm formation. The activation results in the release of RssB from its cognate inner membrane sensor kinase, RssA, to the cytoplasm where the downstream gene promoters are located. Such dynamic localization of RssB requires phosphorylation of this regulator. By revealing the temporal activation of RssAB signaling following development of surface multicellular behavior, our findings contribute to an improved understanding of how bacteria coordinate their lifestyle on a surface.

Pseudomonas aeruginosa Biofilm Inactivation: Decreased Cell Culturability, Adhesiveness to Surfaces, and Biofilm Thickness Upon High-Pressure Nonthermal Plasma Treatment

Bacterial biofilms are more resilient to standard killing methods than free-living bacteria. Pseudomonas aeruginosa PAO1 biofilms grown on borosilicate coupons were treated with gas-discharge plasma for various exposure times. Almost 100% of the cells were inactivated after a 5-min plasma exposure. Atomic force microscopy was used to image the biofilms and study their micromechanical properties. Results show that the adhesiveness to borosilicate and the thickness of the Pseudomonas biofilms are reduced upon plasma treatment.

Interfacial electrochemical electron transfer processes in bacterial biofilm environments on Au(111)

We have studied Streptococcus mutans (S. mutans) biofilm growth and growth inhibition on Au(111)-surfaces using atomic force microscopy (AFM) and interfacial electrochemistry of a number of redox probe molecules. AFM of the biofilm growth and growth inhibition on both mica and Au(111)-surfaces was followed by sampling at given times, drying the samples naturally, and imaging. The electrochemical investigations were based on single-crystal Au(111)-electrode surfaces to exclude polycrystallinity as a cause of inhomogeneous voltammetric broadening on the biofilm covered electrode surfaces. The redox couples were chosen for their positive ([Ru(NH(3))(6)](3+/2+), [Co(terpy)(2)](3+/2+), terpy = 2,2',2''-terpyridine) or negative ([Fe(CN)(6)](3-/4-), [IrCl(6)](3-/4-)) electrostatic charge. [Co(NH(3))(6)](3+/2+) and [Co(phen)(3)](3+/2+) (phen = 1,10-phenanthroline) were other inhibition factors investigated. The positively and negatively charged redox probe couples displayed antagonistic inhibition and voltammetric patterns. [Ru(NH(3))(6)](3+/2+) and the homologous compound [Co(NH(3))(6)](3+/2+) were the only probe compounds to effect growth inhibition. On the other hand, cyclic voltammetry (CV) of both [Ru(NH(3))(6)](3+/2+) (positively charged, biofilm growth inhibitor) and [Co(terpy)(2)](3+/2+) (positively charged, no biofilm growth inhibition) displayed fully reversible CV on biofilm covered electrodes, almost indistinguishable from CV at bare Au(111)-electrode surfaces. In comparison, CVs of [Fe(CN)(6)](3-/4-) and [IrCl(6)](3-/4-) (both negatively charged and no growth inhibition) were distorted from planar diffusion behavior on bare Au(111)-electrode surfaces toward spherical diffusion behavior on S. mutans biofilm covered Au(111)-electrode surfaces. DNAase treatment of the biofilm covered Au(111)-electrode surface partly restores planar diffusion CV of [Fe(CN)(6)](3-/4-) and [IrCl(6)](3-/4-). This is reflected in a decrease of the growth rate and the appearance of molecular-scale structures near the bacterial edges as imaged by AFM after DNAase treatment. A rationale for the different voltammetric behavior of positively and negatively charged redox probe molecules based on electrostatic properties of the local surface environment is offered.

Application of AFM from microbial cell to biofilm

Atomic Force Microscopy (AFM) has proven itself over recent years as an essential tool for the analysis of microbial systems. This article will review how AFM has been used to study microbial systems to provide unique insight into their behavior and relationship with their environment. Immobilization of live cells has enabled AFM imaging and force measurement to provide understanding of the structure and function of numerous microbial cells. At the macromolecular level AFM investigation into the properties of surface macromolecules and the energies associated with their mechanical conformation and functionality has helped unravel the complex interactions of microbial cells. At the level of the whole cell AFM has provided an integrated analysis of how the microbial cell exploits its environment through its selective, adaptable interface, the cell surface. In addition to these areas of study the AFM investigation of microbial biofilms has been vital for industrial and medical process analysis. There exists a tremendous potential for the future application of AFM to microbial systems and this has been strengthened by the trend to use AFM in combination with other characterization methods, such as confocal microscopy and Raman spectroscopy, to elucidate dynamic cellular processes.

Macromolecule mediated transport and retention of Escherichia coli O157:H7 in saturated porous media

The role of extracellular macromolecules on Escherichia coli O157:H7 transport and retention was investigated in saturated porous media. To compare the relative transport and retention of E. coli cells that are macromolecule rich and deficient, macromolecules were partially cleaved using a proteolytic enzyme. Characterization of bacterial cell surfaces, cell aggregation, and experiments in a packed sand column were conducted over a range of ionic strength (IS). The results showed that macromolecule-related interactions contribute to retention of E. coli O157:H7 and are strongly linked to solution IS. Under low IS conditions (IS < or = 0.1 mM), partial removal of the macromolecules resulted in a more negative electrophoretic mobility of cells and created more unfavorable conditions for cell-quartz and cell-cell interactions as suggested by Derjaguin-Landau-Verwey-Overbeek (DLVO) interaction energy profiles and cell aggregation kinetics. Consequently, less retention was observed for enzyme treated cells in the corresponding column experiments. In addition, a time-dependent deposition process (i.e., ripening) was observed for untreated cells, but not for treated cells, supporting the fact that the macromolecules enhanced cell-cell interactions. Additional column experiments for untreated cells under favorable conditions (IS > or = 1 mM) showed that a significant amount of the cells were reversibly retained in the column, which contradicts predictions of DLVO theory. Furthermore, a non-monotonic cell retention profile was observed under favorable attachment conditions. These observations indicated that the presence of macromolecules hindered irreversible interactions between the cells and the quartz surface.

Modifying the surface charge of pathogen-sized microspheres for studying pathogen transport in groundwater

Consuming pathogen-contaminated groundwater has caused many waterborne disease worldwide. Microspheres are often used as pathogen surrogates because they can be made similar to pathogens in terms of their sizes, buoyant densities, and shapes. Laboratory studies have, however, shown that the surface charges of microspheres are very different from those of pathogens of comparable sizes, and that their attenuation and transport behaviors differ significantly to those of the pathogens mimicked. Thus, for microspheres to be better surrogates, their surface charges need to be modified. We have demonstrated that the surface charge of a microorganism can be closely mimicked by microspheres covalently coated with a protein that has a similar pHPZC to the microorganism. Using MS2 bacteriophage to test our concept, 20 nm carboxylated microspheres were covalently coated with casein. Zeta potentials as a function of pH were determined for purified MS2, casein, and uncoated and coated microspheres. The uncoated microspheres were significantly more negatively charged than MS2. The coated microspheres displayed zeta potentials and a pHPZC value similar to MS2. The modified surface charge on the microspheres was stable for at least 4 mo. Using the concept developed from this study, surrogates for many specific pathogens of concern can be developed, and the results can be corrected with pathogen die-off determined independently in the laboratory. Protein-coated microspheres could provide a new and alternative approach to investigate pathogen transport in groundwater. Future research is required to validate the surrogates' resemblances to pathogens in terms of their attenuation and transport behaviors in groundwater.

Effects of substrates on biofilm formation observed by atomic force microscopy

Formation of biofilm is known to be strongly dependent on substrates including topography, materials, and chemical treatment. In this study, a variety of substrates are tested for understanding biofilm formation. Sheets of aluminum, steel, rubber, and polypropylene have been used to examine their effects on formation of Pseudomonas aeruginosa biofilm. In particular, the morphological variation, transition, and adhesiveness of biofilm were investigated through local measurement by atomic force microscopy (AFM). Mechanism of removing biofilm from adhering to substrate is also analyzed, thus the understanding of the mechanism can be potentially useful to prevent the biofilm formation. The results reveal that formation of biofilm can remain on rough surface regardless of substrates in hot water, which may easily induce extra-polymeric substances detachment from bacterial surface. By probing using AFM, local force-distance characterization of extra-cellular materials extracted from the bacteria can exhibit the progress of the biofilm formation and functional complexities.

Absolute quantitation of bacterial biofilm adhesion and viscoelasticity by microbead force spectroscopy

Bacterial biofilms are the most prevalent mode of bacterial growth in nature. Adhesive and viscoelastic properties of bacteria play important roles at different stages of biofilm development. Following irreversible attachment of bacterial cells onto a surface, a biofilm can grow in which its matrix viscoelasticity helps to maintain structural integrity, determine stress resistance, and control ease of dispersion. In this study, a novel application of force spectroscopy was developed to characterize the surface adhesion and viscoelasticity of bacterial cells in biofilms. By performing microbead force spectroscopy with a closed-loop atomic force microscope, we accurately quantified these properties over a defined contact area. Using the model gram-negative bacterium Pseudomonas aeruginosa, we observed that the adhesive and viscoelastic properties of an isogenic lipopolysaccharide mutant wapR biofilm were significantly different from those measured for the wild-type strain PAO1 biofilm. Moreover, biofilm maturation in either strain also led to prominent changes in adhesion and viscoelasticity. To minimize variability in force measurements resulting from experimental parameter changes, we developed standardized conditions for microbead force spectroscopy to enable meaningful comparison of data obtained in different experiments. Force plots measured under standard conditions showed that the adhesive pressures of PAO1 and wapR early biofilms were 34 +/- 15 Pa and 332 +/- 47 Pa, respectively, whereas those of PAO1 and wapR mature biofilms were 19 +/- 7 Pa and 80 +/- 22 Pa, respectively. Fitting of creep data to a Voigt Standard Linear Solid viscoelasticity model revealed that the instantaneous and delayed elastic moduli in P. aeruginosa were drastically reduced by lipopolysaccharide deficiency and biofilm maturation, whereas viscosity was decreased only for biofilm maturation. In conclusion, we have introduced a direct biophysical method for simultaneously quantifying adhesion and viscoelasticity in bacterial biofilms under native conditions. This method could prove valuable for elucidating the contribution of genetic backgrounds, growth conditions, and environmental stresses to microbial community physiology.

Escherichia coil O157:H7 transport in saturated porous media: role of solution chemistry and surface macromolecules

The transport and deposition behavior of Escherichia coli O157: H7 was investigated in saturated packed-bed columns and micromodel systems over a range of ionic strength (IS) (1, 10, and 100 mM) and pH (5.8, 8.4, and 9.2) conditions. At a given IS, elevated solution pH resulted in decreased deposition as a result of the increase in the measured zeta potential of the quartz sand. This deposition trend was consistent with predictions from classic Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Conversely, the E. coil O157:H7 deposition was inversely proportionalto IS (1-100 mM) at high pH conditions (8.4 and 9.2), whereas no effect of IS was observed at pH 5.8. This deposition trend was not consistent with DLVO theory, but could be explained by pH-associated electrosteric stabilization. This phenomenon is driven by the pH-dependent protonated state of functional groups on E. coil O157:H7 surface macromolecules and the corresponding conformational state of the bacterial polymers. Results from this study demonstrate that retention of E. coil O157:H7 cells in porous media is a complex process that depends on the solution chemistry, cell-cell interactions, and pore structure. The findings in this study also imply that previous work conducted at lower pH and IS conditions may underestimate E. coli O157:H7 travel distance in higher salt and pH groundwater environments.

Organic compounds inhibiting S. epidermidis adhesion and biofilm formation

The formation of biofilms on surfaces of indwelling medical devices is a serious medical problem. Staphylococcus epidermidis is a common pathogen found to colonize implanted devices and as a biofilm is more resistant to the host immune system as well as to antibiotic treatments. Combating S. epidermidis infections by preventing or eradicating biofilm formation of the bacterium is therefore a medically important challenge. We report here a study of biofilm formation of S. epidermidis on solid surfaces using a combination of confocal laser scanning (CLSM) and atomic force microscopy (AFM) in both air and aqueous environments. We have investigated the inhibitory effects of surfaces treated with four organic compounds, two benzoate derivatives denoted as compound 59 and 75 and two carboxamide derivatives denoted as compound 47 and 73, on S. epidermidis adhesion and biofilm formation. All four compounds evoke significant inhibitory effects on the formation of S. epidermidis biofilms with compounds 47 and 73 being most effective. None of the compounds were found to inhibit growth of S. epidermidis in liquid cultures. Bacteria attached to the substrate when exposed to the compounds were not affected indicating that these compounds inhibit initial adhesion. These results suggest a pretreatment for medically implanted surfaces that can prevent the biofilm formation and reduce infection.

Biofilm formation by Candida albicans isolated from intrauterine devices

Our survey revealed that infected intrauterine devices (IUDs) recovered from patients suffering from reproductive tract infections (RTIs) were tainted with Candida biofilm composed of a single or multiple species. Scanning electron microscopy (SEM) analysis of C. albicans biofilm topography showed that it consists of a dense network of mono- or multilayer of cells embedded within the matrix of extracellular polymeric substances (EPS). Confocal scanning laser microscopy (CSLM) and atomic force microscopy (AFM) images depicted that C. albicans biofilms have a highly heterogeneous architecture composed of cellular and noncellular elements with EPS distributed in the cell-surface periphery or at cell-cell interface. Biochemical analysis showed that EPS produced by C. albicans biofilm contained significantly reduced total carbohydrate (40%), protein (5%) and enhanced amount of hexosamine (4%) in contrast to its planktonic counterparts. The in vitro activity of antifungal agents amphotericin B, nystatin, fluconazole and chlorhexidine against pre-formed C. albicans biofilm, assessed using XTT (2,3-bis[2-methoxy-4-nitro-5-sulfophenyl]-2H-tetrazolium-5-carboxanilide) reduction assay revealed increased resistance of these infectious biofilm (50% reduction in metabolic activity at a concentration of 8, 16, 64, 128 μg/ml respectively) in comparison to its planktonic form.