Atomic force microscopy study of morphological modifications induced by different decontamination treatments on Escherichia coli

Correlative atomic force microscopy and scanning electron microscopy of bacteria-diamond-metal nanocomposites

Research investigating the interface between biological organisms and nanomaterials nowadays requires multi-faceted microscopic methods to elucidate the interaction mechanisms and effects. Here we describe a novel approach and methodology correlating data from an atomic force microscope inside a scanning electron microscope (AFM-in-SEM). This approach is demonstrated on bacteria-diamond-metal nanocomposite samples relevant in current life science research. We describe a procedure for preparing such multi-component test samples containing E. coli bacteria and chitosan-coated hydrogenated nanodiamonds decorated with silver nanoparticles on a carbon-coated gold grid. Microscopic topography information (AFM) is combined with chemical, material, and morphological information (SEM using SE and BSE at varied acceleration voltages) from the same region of interest and processed to create 3D correlative probe-electron microscopy (CPEM) images. We also establish a novel 3D RGB color image algorithm for merging multiple SE/BSE data from SEM with the AFM surface topography data which provides additional information about microscopic interaction of the diamond-metal nanocomposite with bacteria, not achievable by individual analyses. The methodology of CPEM data interpretation is independently corroborated by further in-situ (EDS) and ex-situ (micro-Raman) chemical characterization as well as by force volume AFM analysis. We also discuss the broader applicability and benefits of the methodology for life science research.

Employing Atomic Force Microscopy (AFM) for Microscale Investigation of Interfaces and Interactions in Membrane Fouling Processes: New Perspectives and Prospects

Membrane fouling presents a significant challenge in the treatment of wastewater. Several detection methods have been used to interpret membrane fouling processes. Compared with other analysis and detection methods, atomic force microscopy (AFM) is widely used because of its advantages in liquid-phase in situ 3D imaging, ability to measure interactive forces, and mild testing conditions. Although AFM has been widely used in the study of membrane fouling, the current literature has not fully explored its potential. This review aims to uncover and provide a new perspective on the application of AFM technology in future studies on membrane fouling. Initially, a rigorous review was conducted on the morphology, roughness, and interaction forces of AFM in situ characterization of membranes and foulants. Then, the application of AFM in the process of changing membrane fouling factors was reviewed based on its in situ measurement capability, and it was found that changes in ionic conditions, pH, voltage, and even time can cause changes in membrane fouling morphology and forces. Existing membrane fouling models are then discussed, and the role of AFM in predicting and testing these models is presented. Finally, the potential of the improved AFM techniques to be applied in the field of membrane fouling has been underestimated. In this paper, we have fully elucidated the potentials of the improved AFM techniques to be applied in the process of membrane fouling, and we have presented the current challenges and the directions for the future development in an attempt to provide new insights into this field.

Eco-Friendly Peelable Active Nanocomposite Films Designed for Biological and Chemical Warfare Agents Decontamination

In the context of imminent threats concerning biological and chemical warfare agents, the aim of this study was the development of a new method for biological and chemical decontamination, employing non-toxic, film-forming, water-based biodegradable solutions, using a nano sized reagent together with bentonite as trapping agents for the biological and chemical contaminants. Bentonite-supported nanoparticles of Cu, TiO₂, and Ag were successfully synthesized and dispersed in a polyvinyl alcohol (PVA)/glycerol (GLY) aqueous solution. The decontamination effectiveness of the proposed solutions was evaluated by qualitative and quantitative analytical techniques on various micro-organisms, with sulfur mustard (HD) and dimethyl methylphosphonate (DMMP) as contaminants. The results indicate that the peelable active nanocomposite films can be successfully used on contaminated surfaces to neutralize and entrap the hazardous materials and their degradation products. Mechanical and thermal characterization of the polymeric films was also performed to validate the decontamination solution's potential as peelable-film generating materials. The removal efficacy from the contaminated surfaces for the tested micro-organisms varied between 93% and 97%, while for the chemical agent HD, the highest decontamination factor obtained was 90.89%. DMMP was almost completely removed from the contaminated surfaces, and a decontamination factor of 99.97% was obtained.

Imaging the Separation Distance between the Attached Bacterial Cells and the Surface with a Total Internal Reflection Dark-Field Microscope

The attachment of bacterial cells to a surface is implicated in the formation of biofilms. Although the surface-related behaviors in this process, such as single cell motility and surface sensing, have been investigated intensively, the precise information of separation distance between the attached cells and the surface has remained unclear. Here, we set a prism-based total internal reflection dark-field microscope (p-TIRDFM) combined with the microfluidic method to image the separation distance of single attached cells. We directly observed that bacterial cells attached to the surface with one nearest touchpoint, and it gradually changed to two touchpoints, respectively, for the two offspring with the cell division. We first monitored the fluctuation of the relative distance on nanometer scale when cells twitch on a surface and further established the relationship between the twitching velocity and the separation distance. The results indicated that the moving cells are a considerable distance apart from the surface and the separation distance fluctuated more widely than immobile cells.

Atomic force microscopy for imaging and nanomechanical characterisation of live nematode epicuticle: A comparative Caenorhabditis elegans and Turbatrix aceti study

Atomic force microscopy (AFM), a powerful tool in interdisciplinary biomedical research, has been applied here to investigate the surface of live nematodes epicuticle. We have used AFM in PeakForce Tapping non-resonant imaging and nanomechanical characterisation mode to investigate and compare the surface features of epicuticle of two free-living microscopic nematodes, Caenorhabditis elegans and Turbatrix aceti. We have successfully immobilised live anesthetized adult nematodes on glass supports using either layer-by-layer-deposited polyelectrolyte films or bioadhesive coatings, which allowed for imaging the living nematodes in native environment. We have obtained AFM images and corresponding nanomechanical maps of annular rings and furrows, demonstrating the differences in topography and structure between the species. Our results demonstrate that AFM in PeakForce Tapping mode can be used to image and characterise surfaces of relatively-large live immobilised multicellular organisms, which can be further applied to a number of invertebrates.