Sonochemical synthesis of Dy2(CO3)3 nanoparticles, Dy(OH)3 nanotubes and their conversion to Dy2O3 nanoparticles

Advanced EXAFS analysis techniques applied to the L-edges of the lanthanide oxides

The unique properties of the lanthanide (Ln) elements make them critical components of modern technologies, such as lasers, anti-corrosive films and catalysts. Thus, there is significant interest in establishing structure-property relationships for Ln-containing materials to advance these technologies. Extended X-ray absorption fine structure (EXAFS) is an excellent technique for this task considering its ability to determine the average local structure around the Ln atoms for both crystalline and amorphous materials. However, the limited availability of EXAFS reference spectra of the Ln oxides and challenges in the EXAFS analysis have hindered the application of this technique to these elements. The challenges include the limited k-range available for the analysis due to the superposition of L-edges on the EXAFS, multielectron excitations (MEEs) creating erroneous peaks in the EXAFS and the presence of inequivalent absorption sites. Herein, we removed MEEs to model the local atomic environment more accurately for light Ln oxides. Further, we investigated the use of cubic and non-cubic lattice expansion to minimize the fitting parameters needed and connect the fitting parameters to physically meaningful crystal parameters. The cubic expansion reduced the number of fitting parameters but resulted in a statistically worse fit. The non-cubic expansion resulted in a similar quality fit and showed non-isotropic expansion in the crystal lattice of Nd2O3. In total, the EXAFS spectra and the fits for the entire set of Ln oxides (excluding promethium) are included. The knowledge developed here can assist in the structural determination of a wide variety of Ln compounds and can further studies on their structure-property relationships.

A pH-Sensitive Nanoparticle as Reactive Oxygen Species Amplifier to Regulate Tumor Microenvironment and Potentiate Tumor Radiotherapy

Background

Radiotherapy is a widely used clinical tool for tumor treatment but can cause systemic toxicity if excessive radiation is administered. Although numerous nanoparticles have been developed as radiosensitizers to reduce the required dose of X-ray irradiation, they often have limitations, such as passive reliance on radiation-induced apoptosis in tumors, and little consider the unique tumor microenvironment that contributes radiotherapy resistance.

Methods

In this study, we developed and characterized a novel self-assembled nanoparticle containing dysprosium ion and manganese ion (Dy/Mn-P). We systematically investigated the potential of Dy/Mn-P nanoparticles (NPs) as a reactive oxygen species (ROS) amplifier and radiosensitizer to enhance radiation therapy and modulate the tumor microenvironment at the cellular level. Additionally, we evaluated the effect of Dy/Mn-P on the stimulator of interferon genes (STING), an innate immune signaling pathway.

Results

Physicochemical analysis demonstrated the prepared Dy/Mn-P NPs exhibited excellent dispersibility and stability, and degraded rapidly at lower pH values. Furthermore, Dy/Mn-P was internalized by cells and exhibited selective toxicity towards tumor cells compared to normal cells. Our findings also revealed that Dy/Mn-P NPs improved the tumor microenvironment and significantly increased ROS generation under ionizing radiation, resulting in a ~70% increase in ROS levels compared to radiation therapy alone. This enhanced ROS generation inhibited ~92% of cell clone formation and greatly contributed to cytoplasmic DNA exposure. Subsequently, the activation of the STING pathway was observed, leading to the secretion of pro-inflammatory immune factors and maturation of dendritic cells (DCs).

Conclusion

Our study demonstrates that Dy/Mn-P NPs can potentiate tumor radiotherapy by improving the tumor microenvironment and increasing endogenous ROS levels within the tumor. Furthermore, Dy/Mn-P can amplify the activation of the STING pathway during radiotherapy, thereby triggering an anti-tumor immune response. This novel approach has the potential to expand the application of radiotherapy in tumor treatment.

2D/2D Dy2O3 Nanosheet/MoO3 Nanoflake Heterostructures for Humidity-Independent and Sensitive Ammonia Detection

Chemiresistive ammonia gas (NH3) sensors have been playing a significant role in the fields of environmental protection, food safety monitoring, and air quality evaluation. Nevertheless, balancing the high sensitivity and humidity tolerance remains challenging. Herein, the two-dimensional (2D) heterostructures of molybdenum trioxide (MoO3) nanoflakes decorated with dysprosium oxide (Dy2O3) nanosheets (termed Dy2O3/MoO3) were synthesized via a facile probe-sonication method. With respect to pristine MoO3 counterparts, the optimal Dy2O3/MoO3 sensors possessed a 4.49-fold larger response at a lower temperature (30.52@328.2 °C vs 6.8@369.7 °C toward 10 ppm of NH3), shorter response/recovery times (11.6/2.9 s vs 26.9/43.4 s), 52.6-fold higher sensitivity (17.35/ppm vs 0.33/ppm), and a lower theoretical detection limit (1.02 vs 32.82 ppb). Besides the nice reversibility, wide detection range (0.45-100 ppm) and robust long-term stability, inspiringly, the Dy2O3/MoO3 sensors showed a nearly humidity-independent response. These impressive improvements in the NH3-sensing performance were attributed to numerous heterojunctions to strengthen the carrier concentration modulation and the compensation/protection effect of Dy2O3 to mitigate the humidity effect. Moreover, the Dy2O3/MoO3 sensors showed preliminary application potential in monitoring pork freshness. This work provides a universal methodology for constructing NH3 gas sensors with high sensitivity and good humidity resistance and probably extends the application scenarios of MoO3-based sensors in the Internet of Things in the future.

Interactions of bubbles in acoustic Lichtenberg figure

The evolution of acoustic Lichtenberg figure (ALF) in ultrasound fields is studied using high-speed photography. It is observed that bubbles travel along the branch to the aggregation region of an ALF, promoting the possibility of large bubble or small cluster formation. Large bubbles move away from the aggregation region while surrounding bubbles are attracted into this structure, and a bubble transportation cycle arises in the cavitation field. A simplified model consisting of a spherical cluster and a chain of bubbles is developed to explain this phenomenon. The interaction of the two units is analyzed using a modified expression for the secondary Bjerknes force in this system. The model reveals that clusters can attract bubbles on the chain within a distance of 2 mm, leading to a bubble transportation process from the chain to the bubble cluster. Many factors can affect this process, including the acoustic pressure, frequency, bubble density, and separation distance. The larger the bubble in the cluster, the broader the attraction region. Therefore, the presence of large bubbles might enhance the process in this system. Local disturbances in bubble density could destroy the ALF structure. The predictions of the model are in good agreement with the experimental phenomena.

Selective ultrasonic assisted synthesis of iron oxide mesoporous structures based on sulfonated melamine formaldehyde and survey of nanorod/sphere, sphere and core/shell on their catalysts properties for the Biginelli reaction

Sulfonated melamine-formaldehyde including iron oxide nanoparticles were synthesized by sulfonation of melamine-formaldehyde and then Fe₃O₄ nanoparticles were bounded onto the surface of sulfonated melamine-formaldehyde (SMF). Two different iron oxide nanostructures including nanorods/spheres and nanospheres on sulfonated melamine-formaldehyde (SMF/Fe₃O₄) were obtained only by modifying the time of radiation from 4 to 8 h in our synthetic method. Furthermore core/shell (Fe₃O₄@SMF) was prepared by entrapping Fe₃O₄ magnetic nanoparticles as the core and sulfonated melamine-formaldehyde as the outer shell. The prepared components were characterized via, Fourier transform infrared spectroscopy (FT-IR), titration, X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) analysis, Barret-Joyner-Halenda (BJH) analysis, vibrating sample magnetometer (VSM), energy-dispersive X-ray (EDX) spectroscopy, and thermal gravimetric analysis (TGA). According to obtained results, the synthesized products had a thermal stability near 180 °C, particle-size distribution around of 20-140 nm and surface area between 6 and 10 m²/g. In this study, vapor was used as a heat source. These effective and magnetically recoverable catalysts were employed for the synthesis of numerous 3,4-dihydropyrimidin-2(1H)-ones by utilizing aldehydes, ethylacetoacetate and urea. Functional easiness, excellent yields, short reaction time, the simplicity of work-up or filter, and thermal stability of these catalysts created them as appropriate heterogeneous systems and acceptable alternative to different heterogeneous catalysts.

Nd2O3-SiO2 nanocomposites: A simple sonochemical preparation, characterization and photocatalytic activity

Nd₂O₃-SiO₂ nanocomposites with enhanced photocatalytic activity have been obtained through simple and rapid sonochemical route in presence of putrescine as a new basic agent, for the first time. The influence of the mole ratio of Si:Nd, basic agent and ultrasonic power have been optimized to obtain the best Nd₂O₃-SiO₂ nanocomposites on shape, size and photocatalytic activity. The produced Nd₂O₃-SiO₂ nanocomposites have been characterized utilizing XRD, EDX, TEM, FT-IR, DRS and FESEM. Application of the as-formed Nd₂O₃-SiO₂ nano and bulk structures as photocatalyst with photodegradation of methyl violet contaminant under ultraviolet illumination was compared. Results demonstrated that SiO₂ has remarkable effect on catalytic performance of Nd₂O₃ photocatalyst for decomposition. By introducing of SiO₂ to Nd₂O₃, decomposition efficiency of Nd₂O₃ toward methyl violet contaminant under ultraviolet illumination was increased.

Synergistic effects of ultrasonication and ethanol washing in controlling the stoichiometry, phase-purity and morphology of rare-earth doped ceria nanoparticles

Over a period of last thirty years, use of ethanol has been historically reported for obtaining nanopowders with low agglomeration for various oxide systems. In addition to these benefits, we show for the first time that treatments in ethanol medium coupled with an ultrasonication step can impart crucial additional advantages in controlling the phase purity and stoichiometry/composition for such systems. This is an important issue especially for any complex multicationic oxide nanoparticles system and hence we selected one of the most popular catalyst systems of doped-ceria (CeO₂) nanoparticles with very high (50%) level of rare-earth (lanthanum) doping for this case study. The effect of an ultrasonication combined ethanol treatment was compared with the other solvent media (pure water and ethanol) without ultrasonication. The underlying mechanism for this process involves lowering the deprotonation rate in ethanol medium which eventually reduces the condensation of the individual metal oxides while the ultrasonication ensures the reproducibility of the synthesis by providing a homogeneous colloidal solution for each washing stages. This novel modification in synthesis of nanoparticles aims to provide meaningful solutions in optimising the phase, composition and morphology of multicationic complex system of nanocrystals.

Effect of ligand on particle size and morphology of nanostructures synthesized by thermal decomposition of coordination compounds

Thermal decomposition of organometallic and various coordination compounds are known as general method to synthesize a wide range of nanostructures including metals, metal oxides and sulfides. Herein, in order to coordinate metals and prepare suitable precursor - due to the efficient role of precursor on the particle size and morphology of products - appropriate ligands will be introduced.

Nanostructured Materials Synthesis Using Ultrasound

Recent applications of ultrasound to the production of nanostructured materials are reviewed. Sonochemistry permits the production of novel materials or provides a route to known materials without the need for high bulk temperatures, pressures, or long reaction times. Both chemical and physical phenomena associated with high-intensity ultrasound are responsible for the production or modification of nanomaterials. Most notable are the consequences of acoustic cavitation: the formation, growth, and implosive collapse of bubbles, and can be categorized as primary sonochemistry (gas-phase chemistry occurring inside collapsing bubbles), secondary sonochemistry (solution-phase chemistry occurring outside the bubbles), and physical modifications (caused by high-speed jets, shockwaves, or inter-particle collisions in slurries).

A simple sonochemical approach for synthesis and characterization of Zn2SiO4 nanostructures

Zn2SiO4 nanoparticles have been successfully prepared via a simple sonochemical method, for the first time. The effect of various parameters including ultrasonic power, ultrasonic irradiation time and different surfactants were investigated to reach optimum condition. The as-prepared nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmittance electron microscopy (TEM), Fourier transform infrared (FT-IR) spectra and energy dispersive X-ray microanalysis (EDX). The photocatalytic activity of Zn2SiO4 nano and bulk structures were compared by degradation of anionic dye methyl orange in aqueous solution under UV-light irradiation. Moreover, the cyclic voltammetry analysis of Zn2SiO4 nano and bulk structures were investigated.

Nanocrystals of XTiO3 (X=Ba, Sr, Ni, BaxTi(1-x)) materials obtained through a rapid one-step methodology at 50°C

Titanate-based perovskite (XTiO3; Ba, Sr, Ni, Ba0.6Sr0.4) nanocrystals were synthesized through a unified sonochemical methodology based on the reaction between XCl2 and TiCl4. The effects of the preparation conditions such as ultrasonication time and ultrasonication temperature were studied. XTiO3 nanocrystals were characterized by field-emission scanning electron microscopy (FE-SEM), X-Ray diffractometry and high-resolution transmission electron microscopy techniques. XTiO3 nanocrystals were synthesized at a relatively low temperature of 50°C while were free from any by-product such as XCO3 (carbonate by-products). Characterization of the morphological characteristics and particle size distribution of the obtained powders indicated that the powder products consist of somewhat regularly shaped and relatively spherical particles with a narrow size distribution. The method described here, is simple, rapid, cost-effective and useful for large-scale production purposes.

A green one-pot three-component synthesis of tetrahydrobenzo[b]pyran and 3,4-dihydropyrano[c]chromene derivatives using a Fe3O4@SiO2–imid–PMAn magnetic nanocatalyst under ultrasonic irradiation or reflux conditions

Green synthesis of tetrahydrobenzo[b]pyran and dihydropyrano[3,2-c]chromene derivatives.

Nano- and micro-sized rare-earth carbonates and their use as precursors and sacrificial templates for the synthesis of new innovative materials

Rare-earth carbonate nano- and micro-materials are reviewed, focusing on factors that influence the morphology and luminescence, as well as their applications as precursors and sacrificial templates for other materials.

Immobilization of phosphomolybdic acid nanoparticles on imidazole functionalized Fe3O4@SiO2: a novel and reusable nanocatalyst for one-pot synthesis of Biginelli-type 3,4-dihydro-pyrimidine-2-(1H)-ones/thiones under solvent-free conditions

Fe₃O₄@SiO₂-imid-PMAⁿ: a novel and reusable nanocatalysts.

Synthesis and Characterization of H3PW12O40 and H3PMo12O40 Nanoparticles by a Simple Method

In this study H₃PW₁₂O₄₀·9H₂O and H₃PMo₁₂O₄₀·6H₂O (HPA) particles were changed into nano forms by heat-treatment in an autoclave as a simple, repaid, inexpensive and one step method. The particle size of these nanoparticles was around 25 nm. The as-synthesized nanostructures were characterized by dynamic light scattering, X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy and inductively coupled plasma analyzer. Thermal stability of nanoparticles was surveyed by thermal gravimeter analyse. Acidity of prepared nanoparticles was investigated by pyridine adsorption method. Results showed rising acidity by declining particle size of HPA.

A novel ultrasound assisted method in synthesis of NZVI particles

This research is about a novel ultrasound assisted method for synthesis of nano zero valent iron particles (NZVI). The materials were characterized using TEM, FESEM, XRD, BET and acoustic PSA. The effect of ultrasonic power, precursor/reductant concentration (NaBH4, FeSO4·7H2O) and delivery rate of NaBH4 on NZVI characteristics were investigated. Under high ultrasonic power the morphology of nano particles changed from spherical type to plate and needle type. Also, when high precursor/reductant and high ultrasonic power was used the particle size of NZVI decreased. The surface area of NZVI particles synthesized by ultrasonic method was increased when compared by the other method. From the XRD patterns it was found also the crystallinity of particles was poor.

Sonochemical synthesis and characterization of lead iodide hydroxide micro/nanostructures

For the first time, micro/nano-sized lead iodide hydroxide; Pb(OH)I, has been successfully prepared via a simple ultrasonic method. In this method, lead nitrate and lithium iodide were applied as starting reagents to fabricate Pb(OH)I micro/nanostructures at different conditions. The effect of different surfactants like N,N-bis(salicylidene)-ethylenediamine (H2salen), sodium dodecyl sulfate (SDS) and polyvinylpyrrolidone (PVP), sonication time, and ultrasonic intensity on the morphology and particle size of the products has been investigated. The as-produced micro/nanostructures were characterized with the aid of XRD, SEM, TEM, UV-vis, EDS and FT-IR. According to the SEM images, different morphologies of Pb(OH)I including micro- and nano-sized rods were formed by changing the preparation conditions. Based on the XRD results, it was found that Pb(OH)I and PbI2 have been produced with and without sonication at the same conditions, respectively. The use of the H2salen and sonication treatment were confirmed to be the crucial factors determining the formation of one-dimensional Pb(OH)I micro/nanostructures.

Sonochemical synthesis and characterization of NiMoO4 nanorods

NiMoO(4) nanorods have been successfully synthesized by sonochemical method process by using Ni(CH(3)COO)(2) · 4H(2)O and (NH(4))(6)Mo(7)O(24) · 4H(2)O as starting materials. Some parameters including ultrasonic power, ultrasonic irradiation time, stirring effect, solvent effect, and surfactant effect were investigated to reach optimum condition. The as synthesized nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmittance electron microscopy (TEM), photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectra and energy dispersive X-ray microanalysis (EDX). Facile preparation and separation are important features of this route. This work has provided a general, simple, and effective method to control the composition and morphology of NiMoO(4) in aqueous solution, which will be important for inorganic synthesis methodology.

Sonochemical synthesis of silver vanadium oxide micro/nanorods: solvent and surfactant effects

In this investigation, a facile sonochemical route has been developed for the preparation of silver vanadium oxide (SVO) micro/nanorods by using silver salicylate and ammonium metavanadate as silver and vanadate precursor, respectively. Here, silver salicylate, [Ag(HSal)], is introduced as a new silver precursor to fabricate AgVO(3) nanorods. The effect of numerous solvents and surfactants on the morphology and sonochemical formation mechanism of AgVO(3) nanorods was studied. AgVO(3) nanorods were characterized by SEM and TEM images, XRD patterns, FT-IR, XPS, and EDS spectroscopy. SEM, TEM, and XRD results showed that AgO nanoparticles were formed onto AgVO(3) nanorods in the presence of ethanol, cyclohexanol, dimethylsulfoxide (DMSO), and acetone. By using polyethylene glycol (PEG-6000) and N,N-dimethylformamide (DMF) as organic additives, the thickness of AgVO(3) nanorods decreased.

Simple sonochemical synthesis and characterization of HgSe nanoparticles

Mercury selenide (HgSe) nanostructures were synthesized via a sonochemical method based on the reaction between HgCl(2), SeCl(4) and hydrazine hydrate (N(2)H(4)·H(2)O) in water, in presence of various capping agents. The effects of preparation parameters such as: the kind of capping agent and its amount, ultrasonic power, reaction time and temperature were investigated. It was found that morphology, particle size and phase of the products could be greatly affected by these parameters. HgSe nanostructures were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), photoluminescence spectroscopy (PL) and X-ray energy dispersive spectroscopy (EDS).