In situ sonochemical reduction and direct functionalization of graphene oxide: A robust approach with thermal and biomedical applications

A review on antimicrobial mechanism and applications of graphene-based materials

In recent years, graphene and its derivatives, owing to their phenomenal surface, and mechanical, electrical, and chemical properties, have emerged as advantageous materials, especially in terms of their potential for antimicrobial applications. Particularly important among graphene's derivatives is graphene oxide (GO) due to the ease with which its surface can be modified, as well as the oxidative and membrane stress that it exerts on microbes. This review encapsulates all aspects regarding the functionalization of graphene-based materials (GBMs) into composites that are highly potent against bacterial, viral, and fungal activities. Governing factors, such as lateral size (LS), number of graphene layers, solvent and GBMs' concentration, microbial shape and size, aggregation ability of GBMs, and especially the mechanisms of interaction between composites and microbes are discussed in detail. The current and potential applications of these antimicrobial materials, especially in dentistry, osseointegration, and food packaging, have been described. This knowledge can further drive research that aims to look for the most suitable components for antimicrobial composites. The need for antimicrobial materials has seldom been more felt than during the COVID-19 pandemic, which has also been highlighted here. Possible future research areas include the exploration of GBMs' ability against algae.

Study of molar properties of GO after doping with transition metals for photodegradation of fluorescent dyes

We synthesized graphene oxide (GO) doped with transition metal ions and characterized it using XPS, FT-IR, TGA/DTG, XRD, SEM, AFM, ICP-OES, UV/vis, and Raman spectroscopy. An intrinsic viscosity [η] of 0.002-0.012 g% @ 0.002 aq-GO was determined for viscosity average molecular weight (M _v) of GO at 288.15, 298.15, and 308.15 K. Mark-Houwink (M-H) constants k (cm³ g^-1) and a (cm³ mol g^-2) were calculated for 5-15 mg/100 mL polyvinylpyrrolidone (PVP), using 29, 40, 55 kg mol^-1 as markers for calculating M _v by fitting the [η] to the Mark-Houwink-Sakurada equation (MHSE). We obtained 48 134.19 g mol^-1 M _v at 298.15 K, and the apparent molar (V _{ϕ m} , cm³ mol^-1), limiting molar volumes (V ⁰ _GO)_GO⃑0, enthalpy (ΔH _m, J mol^-1), entropy (ΔS _m, J mol^-1 K^-1), viscosity (η _m, mPa s mol^-1), surface tension (γ _m, mN m^-1 mol^-1), friccohesity (σ _m, scm^-1 mol^-1), fractional volume (ϕ _m, cm³ mol^-1), isentropic compressibility (K _sϕ,m, 10^-4 cm s² g^-1 mol), infer GO molar consistency throughout the chemical processes. Molar properties (MPs) infer a GO monodispersion producing negative electrons (e^-) and positive holes (h⁺) under sunlight. The transition metal ions (Fe²⁺, Mn²⁺, Ni²⁺, Cr³⁺, TMI) doped onto GO (TMI-GO), can photodegrade methylene blue (MB) in 60 min compared with 120 min using GO alone. The 4011 C atoms, 688 hexagonal sheets, 222 π-conjugations, and 4011 FE were calculated from the 48 134.19 g mol^-1. The functional edges are the negative and positive holes generating centres of the GO 2D sheets.

GO-based antibacterial composites: Application and design strategies

Graphene oxide (GO), for its unique structure with high biocompatibility and designability, is widely used in the antibacterial field. Various strategies have been designed to fabricate GO-based composites with antibacterial properties. This review summarized these strategies, divided them into three types and interpreted their antibacterial mechanisms: (i) "GO*/non-GO" type in which GO acts as the single antibacterial core, (ii) "GO*/non-GO*" type in which GO and non-GO components function synergistically as dual antibacterial cores, (iii) "GO/non-GO*" type in which non-GO acts as the single antibacterial core, while GO component plays a supportive, not a dominant role in antibiosis. Besides, the fields suiting their applications and factors influencing their antibacterial properties were analyzed. Finally, the limitations and prospects in the current researches were discussed. In summary, GO-based composites have revolutionized antibacterial strategies. This review may serve as a reference to inspire further research on GO-based antibacterial composites.

Effect of Particle Size on the Mechanical Properties of TiO2-Epoxy Nanocomposites

This study investigated the effects of the packing density and particle size distribution of TiO₂ nanoparticles on the mechanical properties of TiO₂–epoxy nanocomposites (NCs). The uniform dispersion and good interfacial bonding of TiO₂ in the epoxy resin resulted in improved mechanical properties with the addition of nanoparticles. Reinforcement nano-TiO₂ particles dispersed in deionized water produced by three different ultrasonic dispersion methods were used; the ultrasonication effects were then compared. The nano-TiO₂ suspension was added at 0.5–5.0 wt.%, and the mechanical and thermal properties of TiO₂–epoxy NCs were compared using a universal testing machine, scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), and differential scanning calorimetry (DSC). The tensile strength of the NCs was improved by the dispersion strengthening effect of the TiO₂ nanoparticles, and focused sonication improved the tensile strength the most when nano-TiO₂ suspensions with a particle size of 100 nm or smaller were used. Thus, the reinforcing effect of TiO₂ nanoparticles on the epoxy resin was observed, and the nano-TiO₂ suspension produced by focused sonication showed a more distinct reinforcing effect.

Physics Comes to the Aid of Medicine-Clinically-Relevant Microorganisms through the Eyes of Atomic Force Microscope

Despite the hope that was raised with the implementation of antibiotics to the treatment of infections in medical practice, the initial enthusiasm has substantially faded due to increasing drug resistance in pathogenic microorganisms. Therefore, there is a need for novel analytical and diagnostic methods in order to extend our knowledge regarding the mode of action of the conventional and novel antimicrobial agents from a perspective of single microbial cells as well as their communities growing in infected sites, i.e., biofilms. In recent years, atomic force microscopy (AFM) has been mostly used to study different aspects of the pathophysiology of noninfectious conditions with attempts to characterize morphological and rheological properties of tissues, individual mammalian cells as well as their organelles and extracellular matrix, and cells’ mechanical changes upon exposure to different stimuli. At the same time, an ever-growing number of studies have demonstrated AFM as a valuable approach in studying microorganisms in regard to changes in their morphology and nanomechanical properties, e.g., stiffness in response to antimicrobial treatment or interaction with a substrate as well as the mechanisms behind their virulence. This review summarizes recent developments and the authors’ point of view on AFM-based evaluation of microorganisms’ response to applied antimicrobial treatment within a group of selected bacteria, fungi, and viruses. The AFM potential in development of modern diagnostic and therapeutic methods for combating of infections caused by drug-resistant bacterial strains is also discussed.

Green sonochemical synthesis, kinetics and functionalization of nanoscale anion exchange resins and their performance as water purification membranes

This paper reports on sonochemically catalyzed atom transfer radical polymerization (SONO-ATRP) polyelectrolyte synthesis and chain-end functionalization to single-walled carbon nanotubes (SWCNT). This all aqueous process is kinetically facile without use of initiator, or reducing agents and with very low concentrations of catalyst. The process achieves high functionalization density of polymer onto the SWCNTs. These functionalized nanoscale resins (NanoResins) exhibit high performance as fast and sustainable water purification materials. SONO-ATRP of vinyl benzyl trimethyl ammonium chloride (vbTMAC) was performed in aqueous medium resulting in short polyelectrolyte strands with high atom economy and high monomer conversions (93%) at room temperature using a thin probe sonicator (144Wcm^-2, 20 kHz, for 4 h). Kinetics analysis showed first order kinetics with respect to monomer concentration in presence of or absence of sonication power. Low temperature SONO-ATRP functionalization of SWCNTs is achieved within two hours without added reducing agent while similar functionalization density using reducing agents without sonochemistry required 12 h under reflux conditions. Functionalized NanoResin membranes were tested against surrogate analyte and demonstrated high performance Thomas Model breakthrough curves with a maximum adsorption capacity of 139 ± 1 mgg^-1 and water flux of 692 Lm^-2h^-1bar^-1 at one atmosphere pressure. Moreover, these materials are easily regenerated and reused without loss of performance or degradation.

Microbial ingress and in vitro degradation enhanced by glucose on bioabsorbable Mg-Li-Ca alloy

Biodegradable magnesium alloys are challenging to be implanted in patients with hyperglycemia and diabetes. A hypothesis is suggested that glucose accelerates microbial ingress and in vitro degradation of Mg-Li-Ca implants. Corrosion resistance and mechanical properties was demonstrated using electrochemical, hydrogen evolution and tensile tests. The bacteria from Hank's solution were isolated via 16S rRNA gene analysis. The results revealed that Mg-1Li-1Ca alloy exhibited different responses to Hank's solution with and without glucose. The solution acidity was ascribed to Microbacterium hominis and Enterobacter xiangfangensis, indicating that glucose promoted microbial activity and degradation and deterioration in mechanical property of Mg-1Li-1Ca alloy.

Cosmetic reconstruction in breast cancer patients: Opportunities for nanocomposite materials

The most common malignancy in women, breast cancer remains a major medical challenge that affects the life of thousands of patients every year. With recognized benefits to body image and self-esteem, the use of synthetic mammary implants for elective cosmetic augmentation and post-mastectomy reconstruction continues to increase. Higher breast implant use leads to an increased occurrence of implant-related complications associated with implant leakage and rupture, capsular contracture, necrosis and infections, which include delayed healing, pain, poor aesthetic outcomes and the need for revision surgeries. Along with the health status of the implant recipient and the skill of the surgeon, the properties of the implant determine the likelihood of implant-related complications and, in doing so, specific patient outcomes. This paper will review the challenges associated with the use of silicone, saline and "gummy bear" implants in view of their application in patients recovering from breast cancer-related mastectomy, and investigate the opportunities presented by advanced functional nanomaterials in meeting these challenges and potentially opening new dimensions for breast reconstruction. STATEMENT OF SIGNIFICANCE: Breast cancer is a significant cause of morbidity and mortality in women worldwide, which is difficult to prevent or predict, and its treatment carries long-term physiological and psychological consequences. Post-mastectomy breast reconstruction addresses the cosmetic aspect of cancer treatment. Yet, drawbacks of current implants contribute to the development of implant-associated complications, which may lead to prolonged patient care, pain and loss of function. Nanomaterials can help resolve the intrinsic biomechanical mismatch between implant and tissues, enhance mechanical properties of soft implantable materials, and provide an alternative avenue for controlled drug delivery. Here, we explore advances in the use of functionalized nanomaterials to enhance the properties of breast implants, with representative examples that highlight the utility of nanomaterials in addressing key challenges associated with breast reconstruction.

A Hybrid Nanoplatform of Graphene Oxide/Nanogold for Plasmonic Sensing and Cellular Applications at the Nanobiointerface

In this study, nanocomposites of spherical gold nanoparticles (AuNPs) and graphene oxide (GO) nanosheets were fabricated by a simple one-step reduction method. The characterisation by UV-visible spectroscopy of the plasmonic sensing properties pointed out to a strong interaction between graphene and metal nanoparticles in the hybrid GO-AuNP, as confirmed by nuclear magnetic resonance. Moreover, atomic force microscopy analyses demonstrated that the gold nanoparticles were mostly confined to the basal planes of the GO sheets. The response of the nanoassemblies at the biointerface with human neuroblastoma SH-SY5Y cell line was investigated in terms of nanotoxicity as well as of total and mitochondrial reactive oxygen species production. Confocal microscopy imaging of cellular internalization highlighted the promising potentialities of GO-AuNP nanoplatforms for theranostic (i.e., sensing/imaging + therapy) applications.

A Core-Shell Nanoplatform for Synergistic Enhanced Sonodynamic Therapy of Hypoxic Tumor via Cascaded Strategy

Sonodynamic therapy (SDT) always causes tumor hypoxia aggravation which can induce malignant cell proliferation and drug resistance. To overcome these disadvantages, a cascaded drug delivery system (Lipo/HMME/ACF@MnO2 -AS1411) is constructed for synergistic enhanced sonodynamic therapy. First, hematoporphyrin monomethyl ether (HMME) and acriflavine (ACF) are encapsulated in the lipid layers and the inner aqueous cores of the liposomes, respectively. Then the ultrathin manganese dioxide (MnO2 ) nanosheets are coated on the surface of the liposomes by using KMnO4 and polyethylene glycol through "one step reduction and modification" method. Furthermore, the nanoparticles are decorated with tumor-targeting AS1411 aptamer through the phosphate groups on the DNA strand which can bind to Mn sites to obtain Lipo/HMME/ACF@MnO2 -AS1411 delivery system. Herein, HMME can act as a sonosensitizer, and ACF is used to prevent the formation of HIF-1α/HIF-1β dimerization to overcome the negative effects after SDT. The Lipo/HMME/ACF@MnO2 -AS1411 delivery system has multiple functions, including codelivery of HMME and ACF, pH/glutathione/ultrasound triple responses, synergistic cascaded enhancement of SDT, precise tumor-targeting, and magnetic resonance imaging. The in vitro and in vivo results suggest that the Lipo/HMME/ACF@MnO2 -AS1411 delivery system is a promising core-shell nanoplatform for synergistic enhancement of sonodynamic therapy, which can provide a new approach in the related research fields.

Synthesis of phosphonic acid silver-graphene oxide nanomaterials with photocatalytic activity through ultrasonic-assisted method

In this article, phosphonic acid silver-graphene oxide nanomaterials (Nano-PAS-GO) was synthesized from silver nitrate (AgNO₃) solution and phosphoric graphene oxide (PGO) via the convenient ultrasonic-assisted method, and the structure and morphology were characterized, and the photocatalytic activity and recyclability were evaluated through photocatalyzing degradation of Rhodamin B (RhB) aqueous solution, and the possible photocatalytic mechanism was also discussed. Based on those, it was confirmed that Nano-PAS-GO has been synthesized from AgNO₃ solution and PGO colloidal suspension under ultrasonic-assisted condition, and Nano-PAS-GO has consisted of phosphoric acid silver nanoparticles and GO with 2D lattice (2D GO lattice) connected in the form of C-P bonds, and the photodegradation rate of Nano-PAS-GO for RhB aqueous solution has reached 93.99%, and Nano-PAS-GO has possessed the nicer recyclability when the photocatalytic time was 50 min. From those results, the strong and stable interface _.between PAS nanoparticles and 2D GO lattice connected in the form of the covalent bonds has effectively inhibited the occurrence of the photocorrosion phenomenon.

A new analytical device incorporating a nitrogen doped lanthanum metal oxide with reduced graphene oxide sheets for paracetamol sensing

The novel N-CeO₂ nanoparticles decorated on reduced graphene oxide (N-CeO₂@rGO) composite has been synthesized by sonochemical method. The characterization of as prepared nanocomposite was intensely performed by UV-Vis, FT-IR, EDX, FE-SEM, HR-TEM, XRD, and TGA analysis. The synthesized nanomaterial was further investigated for its selective and sensitive sensing of paracetamol (PM) based on a N-CeO₂@rGO modified glassy carbon electrode. A distinct and improved reversible redox peak of PM is obtained at N-CeO₂@rGO nanocomposite compared to the electrodes modified with N-CeO₂ and rGO. It displays a very good performance with a wide linear range of 0.05-0.600 μM, a very low detection limit of 0.0098 μM (S/N = 3), a high sensitivity of 268 μA µM^-1 cm^-2 and short response time (<3 s). Also, the fabricated sensor shows a good sensibleness for the detection of PM in various tablet samples.

Sonochemically synthesized blue fluorescent functionalized graphene oxide as a drug delivery system

Ultrasound assisted the copper-catalyzed cross-coupling reaction to synthesis 1-(10-bromoanthracene-9-yl)-1H-imidazole-4,5-dicarboxylic acid (A-Im). The obtained product was employed to modify graphene oxide (GO) surface to produce GO-A-Im. The resulted hybrid was characterized with Scanning Electron Microscope (SEM/EDS); X-ray Diffraction spectroscopy (XRD); X-ray photoelectron spectroscopy (XPS); Fluorescence spectroscopy; Fourier transformed infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), and UV-Vis absorption spectroscopy. The synthesized (A-Im) moiety that was used for functionalization of GO, display a cyan emission around (496 nm), however, the GO hybrid exhibited blue photoluminescence around (403 nm). It has been proposed that the chemical attachment of the A-Im moiety onto GO surface leads to a distortion in the bandgap of the GO and the blue shift of luminescence [93 nm] was observed. Indeed the cytotoxicity properties of the synthesized hybrid were measured. The IC₅₀ value for the hybrid was 23 µg/ml. The model drug (DOX) was loaded up to 91% on the carrier, and the release profile indicated a pH-dependent discharge with more release in acidic pH. The GO-A-Im/DOX was injected to the 4T1 tumor (murine breast cancer) bearing BALB/c mice and after 10 days the tumor was disappeared.

MWCNT/TiO2 hybrid nano filler toward high-performance epoxy composite

In this work, multi-walled carbon nanotubes (MWCNTs) are decorated by TiO₂ nanoparticles and formed a new hybrid structure of filler (MWCNT/TiO₂ hybrid filler). The MWCNT/TiO₂ hybrid filler is reinforced in epoxy matrix and studied the mechanical and anti-corrosion properties of epoxy. The morphology of newly formed MWCNT/TiO₂ hybrid nano filler has been studied using transmission electron microscopy (TEM). Field Emission Scanning Electron Microscope (FESEM) images of tensile fracture surface confirmed the superior dispersion of MWCNT/TiO₂ in the epoxy matrix. The resultant MWCNT/TiO₂ hybrid-epoxy nanocomposite exhibits superior anti-corrosion and mechanical performance than the nanocomposite produced by loading of only MWCNTs or TiO₂ nanoparticles as well as neat epoxy. For example, tensile strength and storage modulus of epoxy increased by 61% and 43% respectively on loading of MWCNT/TiO₂ hybrid nano filler. Furthermore, the coating of MWCNT/TiO₂ hybrid-epoxy nanocomposite on mild steel reduces the corrosion rate upto 0.87×10^-3MPY from 16.81MPY.

One-step green hydrothermal synthesis of biocompatible graphene/TiO2 nanocomposites for non-enzymatic H2O2 detection and their cytotoxicity effects on human keratinocyte and lung fibroblast cells

A simple, safe, and efficient approach to synthesise graphene/titanium dioxide (G/TiO₂) nanocomposites with potential in electrochemical sensing application and relatively good biocompatibility to human cells.

Ultrasonic-assisted preparation of graphene oxide carboxylic acid polyvinyl alcohol polymer film and studies of thermal stability and surface resistivity

In this paper, flake graphite, nitric acid and acetic anhydride are used to prepare graphene oxide carboxylic acid (GO-COOH) via an ultrasonic-assisted method, and GO-COOH and polyvinyl alcohol polymer (PVA) are used to synthesize graphene oxide carboxylic acid polyvinyl alcohol polymer (GO-COOPVA) via the ultrasonic-assisted method, and GO-COOPVA is used to manufacture graphene oxide carboxylic acid polyvinyl alcohol polymer film (GO-COOPVA film) via a solidification method, and the structure and morphology of GO-COOH, GO-COOPVA and GO-COOPVA film are characterized, and the thermal stability and surface resistivity are measured in the case of the different amount of GO-COOH. Based on the characterization and measurement, it has been successively confirmed and attested that carboxyl groups implant on 2D lattice of GO to form GO-COOH, and GO-COOH and PVA have the esterification reaction to produce GO-COOPVA, and GO-COOPVA consists of 2D lattice of GO-COOH and the chain of PVA connected in the form of carboxylic ester, and GO-COOPVA film is composed of GO-COOPVA, and the thermal stability of GO-COOPVA film obviously improves in comparison with PVA film, and the surface resistivity of GO-COOPVA film clearly decreases.

Application of ultrasonic irradiation as a benign method for production of glycerol plasticized-starch/ascorbic acid functionalized MWCNTs nanocomposites: Investigation of methylene blue adsorption and electrical properties

A solution mixing and ultrasonic dispersion method as a green, the fast, inexpensive and effective technique was utilized to prepare glycerol plasticized-starch (GPS)/ascorbic acid (AA)-MWCNTs nanocomposites (NCs) via the introduction of various amounts of AA-MWCNTs (3, 6 and 9wt%) as filler into GPS matrix. The GPS was synthesized by addition of glycerol (50%) as a plasticizer to starch which enhances its flexibility. Characterization of the obtained GPS/AA-MWCNTs NCs was accomplished by different techniques. The optimum filler content for the generation of fine electrical conductivity and good mechanical properties was found to be about 3wt%. The distribution of AA-MWCNTs at the low content (3wt%) in the GPS matrix was better due to the strong linkage between nanofiller and GPS in GPS/AA-MWCNTs NC. The results of adsorption studies showed that the fabricated NC can be a good adsorbent for removal of methylene blue (MB) dye from aqueous solutions.

Sono-precipitation of Ag2CrO4-C composite enhanced by carbon-based materials (AC, GO, CNT and C3N4) and its activity in photocatalytic degradation of acid orange 7 in water

Enhancing the photocatalytic activity of Ag₂CrO₄ with coupled carbon-based materials like activated carbon, graphene oxide, carbon nanotubes and carbon nitride has been investigated in removal of Acid Orange 7 from wastewater. Sono precipitated Ag₂CrO₄-C composite based photocatalysts were characterized by XRD, BET, FESEM, FTIR and UV-vis DRS and the photocatalytic activity of theses samples was evaluated in terms of degradation amount of acid orange 7 under visible light irradiations. BET analysis showed that with addition of carbon based materials, the specific surface area of the Ag₂CrO₄-C composite increased. XRD analysis indicated that the crystallinity of Ag₂CrO₄ peaks decreased after addition of all studied carbon-based materials and C₃N₄ has lowered the crystallinity of Ag₂CrO₄ less than others. Higher crystallinity has the positive effect of higher photocatalytic activity because among above mentioned composites, Ag₂CrO₄-C₃N₄ photocatalyst exhibited higher photocatalytic activity and stability under visible light irradiations. DRS analysis confirmed good match of electronic structures of Ag₂CrO₄ and C₃N₄. On the other hand Ag₂CrO₄ and C₃N₄ formed heterojunction which separates photo-generated electron-hole pairs effectively. Also evaluation of photocatalytic reaction in various operating parameters showed Ag₂CrO₄-C₃N₄ had the highest photocatalytic activity in neutral pH and 1g/L of catalyst loading.

State of the art and recent advances in the ultrasound-assisted synthesis, exfoliation and functionalization of graphene derivatives

Sonochemistry, an almost a century old technique was predominantly employed in the cleaning and extraction processes but this tool has now slowly gained tremendous attention in the synthesis of nanoparticles (NPs) where particles of sub-micron have been produced with great stability. Following this, ultrasonication techniques have been largely employed in graphene synthesis and its dispersion in various solvents which would conventionally take days and offers poor yield. Ultrasonic irradiation allows the production of thin-layered graphene oxide (GO) and reduced graphene oxide (RGO) of up to 1nm thickness and can be produced in single layers. With ultrasonic treatment, reactions were made easy whereby graphite can be directly exfoliated to graphene layers. Oxidation to GO can also be carried out within minutes and reduction to RGO is possible without the use of any reducing agents. In addition, various geometry of graphene can be produced such as scrolled graphene, sponge or foam graphene, smooth as well as those with rough edges, each serving its own unique purpose in various applications such as supercapacitor, catalysis, biomedical, etc. In ultrasonic-assisted reaction, deposition of metal NPs on graphene was more homogeneous with custom-made patterns such as core-shell formation, discs, clusters and specific deposition at the edges of graphene sheets. Graphene derivatives with the aid of ultrasonication are the perfect catalyst for various organic reactions as well as an excellent adsorbent. Reactions which used to take hours and days were significantly reduced to minutes with exceedingly high yields. In a more recent approach, sonophotocatalysis was employed for the combined effect of sonication and photocatalysis of metal deposited graphene. The system was highly efficient in organic dye adsorption. This review provides detailed fundamental concepts of ultrasonochemistry for the synthesis of graphene, its dispersion, exfoliation as well as its functionalization, with great emphasis only based on recent publications. Necessary parameters of sonication such as frequency, power input, sonication time, type of sonication as well as temperature and dual-frequency sonication are discussed in great length to provide an overview of the resultant graphene products.

Dispersion enhancing effect of sonochemically functionalized graphene oxide for catalysing antioxidant efficacy of curcumin

The non-hazardous sonochemical approach has been developed for the functionalization of graphene oxide (GrO) with 5-Aminoindazole (5-AIND). The formation of f-(5-AIND) GrO is confirmed with ¹³C solid state NMR, HRXPS, XRD, Raman, TGA, DSC, FTIR etc. The >80% cell viabilities on MCF-7 and Vero cell lines have confirmed the high cytocompatibility of f-(5-AIND) GrO. Additionally, the morphological impact on Vero cell line has evidently confirmed the biocompatibility of f-(5-AIND) GrO. As compared to GrO, the f-(5-AIND) GrO has demonstrated an enhanced antioxidant efficacy of 69.4-72%, evaluated with 2, 2-diphenyl-1-picrylhydrazyl (DPPH) free radical assay. With a similar objective (0.01-0.05)mL peanut oil based curcumin micro and nanoemulsions have been prepared using ethanol and glycerol as co-solvent and co-surfactant respectively. The prepared emulsions are subsequently characterised with respect to morphological and physicochemical parameters via density, surface tension, viscosity, friccohesity measurement and DLS analysis. Henceforth, with an expectation to achieve higher dispersion, an ethanolic dispersion of f-(5-AIND) GrO has been mixed with curcumin carrying emulsions in 1:1. Notably, the radical scavenging activities (RSA) of the combined formulations are significantly enhanced to an extent of 26.6%.

Analysis of Staphylococcus aureus cell viability, sublethal injury and death induced by synergistic combination of ultrasound and mild heat

This study was designed to investigate the combined effects of ultrasound and mild heat on the viability of S. aureus in association with the cell membrane integrity and intracellular enzyme activity. Cells were treated by ultrasound under 55°C for 3, 5, 7, 10, and 15min. The dynamic changes of S. aureus cell viability, sublethal injury and death were evaluated using flow cytometric assay. Microscopies were applied to identify the morphological appearance, ultrastructure and topography of S. aureus. The results showed the membrane damage was synchronous with esterase inhibition during the exposure to sonication, leading to the immediate lethal effect. On the other hand, bacteria under the mild heat at 55°C were inactivated via a sublethal injury process. The different lethal modes were observed between sonication and mild heat treatments, which could synergistically inactivate S. aureus. The antibacterial value of thermo-sonication was greater than the sum of the individual treatments. The thermo-sonication combination synergistically reduced the number of sublethal cells and also resulted in severe cell damage.

Ultrasonic-assisted synthesis of polyvinyl alcohol/phytic acid polymer film and its thermal stability, mechanical properties and surface resistivity

In this paper, polyvinyl alcohol/phytic acid polymer (PVA/PA polymer) was synthesized through esterification reaction of PVA and PA in the case of acidity and ultrasound irradiation and characterized, and PVA/PA polymer film was prepared by PVA/PA polymer and characterized, and the influence of dosage of PA on the thermal stability, mechanical properties and surface resistivity of PVA/PA polymer film were researched, and the influence of sonication time on the mechanical properties of PVA/PA polymer film was investigated. Based on those, it was concluded that the hydroxyl group on the chain of PVA and the phosphonic group on PA were connected together in the form of phosphonate bond, and the hydroxyl group on the chain of PVA were connected together in the form of ether bond after the intermolecular dehydration; in the meantime, it was also confirmed that PVA/PA polymer film prepared from 1.20mL of PA not only had the high thermal stability and favorable ductility but also the low surface resistivity in comparison with PVA/PA polymer film with 0.00mL of PA, and the ductility of PVA/PA polymer film was very sensitive to the sonication time.

Ultrasonic-assisted biosurface modification of multi-walled carbon nanotubes with Thiamine and its influence on the properties of PVC/Tm-MWCNTs nanocomposite films

The present paper represents a simple and efficient technique via ultrasonic irradiation, which utilized for chemical treatment of carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) with Thiamine (Tm). Poly(vinyl chloride) (PVC) based nanocomposites (NC)s were prepared by the incorporation of various amounts of modified MWCNTs (4, 8, and 12wt%) within the PVC matrix by blending solution and ultrasonic distribution methods. The morphological, chemical structure and thermal stability of the PVC/Tm-MWCNT NCs were identified via Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, and thermogravimetric analysis. The obtained results of thermal behavior indicated the high thermal stability of PVC/Tm-MWCNT NCs in comparison with the pure PVC via presenting diverse quantities of Tm-MWCNTs. In addition, the mechanical behavior of the PVC/Tm-MWCNT NCs films was examined and the results exhibited that mechanical properties of fabricated NCs were improved.

Sonochemical synthesis of silver nanoparticles anchored reduced graphene oxide nanosheets for selective and sensitive detection of glutathione

Developed here an eco-friendly, one-pot approach toward rapid synthesis of silver nanoparticles anchored reduced graphene oxide (AgNPs_(TMSPED)-rGO) nanosheets via sonochemical irradiation method, using an aqueous solution mixture of GO and AgNO₃ in the presence of N-[3(trimethoxysilyl)propyl] ethylenediamine (TMSPED) without any reducing agent. As synthesized decorated nanosheets was thoroughly characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) spectroscopy, Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Pristine AgNPs_(TMSPED), pristine rGO_(TMSPED) and as prepared AgNPs_(TMSPED)-rGO materials were employed to modify the glassy carbon (GC) electrode and demonstrated its excellent electrocatalytic activities towards glutathione (GSH). Voltammetry and amperometry measurements were utilized to assess the electrochemical properties towards the glutathione detection. When the Ag nanoparticles were anchored onto the rGO surface, the observed results illustrated that the electrocatalytic properties of rGO might be enhanced. The resulting sensor exhibits excellent repeatability and long-term stability. Furthermore, AgNPs_(TMSPED)-rGO/GC electrode able to be employed for the selective determination of GSH in amperometric analysis in the presence of ascorbic acid (AA), dopamine (DA), uric acid (UA) and glucose. Finally, this modified electrode was effectively applied to determine glutathione in real samples with good recoveries.

Acoustic cavitation induced generation of stabilizer-free, extremely stable reduced graphene oxide nanodispersion for efficient delivery of paclitaxel in cancer cells

Graphene is one of the highly explored nanomaterials due to its unique and extraordinary properties. In this study, by utilizing a hydrothermal reduction method, graphene oxide (GO) was successfully converted to reduced graphene oxide (RGO) without using any toxic reducing agents. Following this, with the use of ultrasonic cavitation, profoundly stable few layer thick RGO nanodispersion was generated without employing any stabilizers or surfactants. During ultrasonication, shockwaves from the collapse of bubbles cause a higher dispersing energy to the graphene nanosheets which surpass the forces of Van der Waal's and π-π stacking and thus pave the way to form a stable aqueous nanodispersion of graphene. Ultrasonication systems with different power intensity have been employed to determine the optimum conditions for obtaining the most stable RGO dispersion. The optimised conditions of ultrasonic treatments led to the development of a very stable reduced graphene oxide (RGO) aqueous dispersion. The stability was observed for two years and was analyzed by using Zetasizer by measuring the particle size and zeta potential at regular intervals and found to have exceptional stability. The excellent stability at physiological pH promotes its utilization in nano drug delivery application as a carrier for Paclitaxel (Ptx), an anticancer drug. The in vitro cytotoxicity analysis of Ptx loaded RGO nanodispersion by MTT assay performed on the cell lines revealed the potential of the nanodispersion as a suitable drug carrier. Studies on normal lung cells, MRC-5 and nasopharyngeal cancer cells, HK-1 supported the biocompatibility of RGO-Ptx towards normal cell line. This investigation shows the potential of exceptionally stable RGO-Ptx nanodispersion in nano drug delivery applications.

Ultrasonic-assisted synthesis of phosphorus graphene oxide/poly (vinyl alcohol) polymer and surface resistivity research of phosphorus graphene oxide/poly (vinyl alcohol) film

In this paper, phosphorus graphene oxide/poly (vinyl alcohol) polymer (PGO/PVA polymer) was synthesized by PGO and PVA via the esterification in the case of faint acidity and the ultrasound irradiation and characterized; moreover, phosphorus graphene oxide/poly (vinyl alcohol) film (PGO/PVA film) was prepared by PGO/PVA polymer and characterized; also, the surface resistivity of PGO/PVA film was investigated in the case of the different amount of PGO. Based on those, it had been found that PGO reacted with PVA to produce PGO/PVA polymer via the esterification under the ultrasonic-assisted condition, and PGO/PVA polymer was structured by 2D lattice of PGO and the chain of PVA connected in the form of six-member lactone ring and phosphonic ester, and PGO/PVA film was constituted by PGO/PVA polymer, and surface resistivity of 0.00, 0.75, 1.50, 2.25 and 3.00wt% of PGO/PVA film were 6.85×10⁸, 2.98×10⁸, 1.42×10⁶, 7.66×10⁴ and 1.29×10⁵Ω/sq, respectively.

Ultrasound assisted simultaneous reduction and direct functionalization of graphene oxide with thermal and cytotoxicity profile

The new sonochemical approach for simultaneous reduction and direct functionalization of graphene oxide (GrO) has been developed. The GrO was functionalized with 2-Aminobenzoxazole (2-ABOZ) in twenty min with complete deletion of hazardous steps. The significance of ultrasound was exemplified with the comparative conventional methods. The newly prepared f-(2-ABOZ)GrO was extensively characterized with near edge X-ray absorption fine structure (NEXAFS) spectroscopy, ¹³C solid state NMR, XPS, XRD, HRTEM, SAED, AFM, Raman, UV-vis, FTIR and TGA. The thermal stability of f-(2-ABOZ)GrO was confirmed with total percentage weight loss in TGA. The biological activity of f-(2-ABOZ)GrO was explored with MCF-7 and Vero cell lines. The inherent cytotoxicity was evaluated with SRB assay at 10, 20, 40 and 80μgmL^-1. The estimated cell viabilities were >78% with f-(2-ABOZ) GrO. A high cytocompatibility of f-(2-ABOZ)GrO was ensured with in vitro evaluation on living cell lines, and low toxicity of f-(2-ABOZ)GrO was confirmed its excellent biocompatibility. The morphological effect on Vero cell line evidently supports the formation of biocompatible f-(2-ABOZ)GrO. Therefore, f-(2-ABOZ)GrO was emerged as an advanced functional material for thermally stable biocompatible coatings.

Understanding the significance of O-doped graphene towards biomedical applications

The cytotoxicity profile, antimicrobial assay and antioxidant efficacy of O-doped graphene have confirmed its significance as an advanced functional biomaterial for biomedical applications. Extensive structural investigations complemented the activity studies.