One-pot sonochemical synthesis of CuS nanoplates decorated partially reduced graphene oxide for biosensing of dopamine neurotransmitter

Electrochemical sensor based on Cu2-xS/graphene heterostructures for sub-picomolar dopamine detection

Detecting dopamine (DA) in biological samples is vital to understand its crucial role in numerous physiological processes, such as motion, cognition, and reward stimulus. In this work, p-type graphene on sapphire, synthesized via chemical vapor deposition, serves as substrate for the preparation of p-type Cu2-xS films through solid-phase sulfurization. The optimized Cu2-xS/graphene heterostructure, prepared at 250 °C using a 15-nm copper film sulfurized for 2 h, exhibits superior electron transfer performance, ideal for electrochemical sensing. It is confirmed that the spontaneous charge transfer from graphene to Cu2-xS, higher Cu(II)/Cu(I) ratio (~ 0.8), and the presence of well-defined nanocrystalline structures with an average size of ~ 35 nm in Cu2-xS significantly contribute to the improved electron transfer of the heterostructure. The electrochemical sensor based on Cu2-xS/graphene heterostructure demonstrates remarkable sensitivity towards DA, with a detection limit as low as 100 fM and a dynamic range greater than 109 from 100 fM to 100 μM. Additionally, it exhibits excellent selectivity even in the presence of uric acid and ascorbic acid 100 times higher, alongside notable storage and measurement stability and repeatability. Impressively, the sensor also proves capable of detecting DA concentrations as low as 100 pM in rat serum, showcasing its potential for clinically relevant analytes and promising applications in sensitive, selective, reliable, and efficient point-of-care diagnostics.

Surface modification prepared porous copper oxide/(Cu-S)n metal-organic framework/reduced graphene oxide hierarchical structure for highly selective electrochemical quercetin detection

Electrochemical alkalization of (Cu-S)n metal-organic framework (MOF) and graphene oxide ((Cu-S)n MOF/GO) composite yields a new CuO/(Cu-S)n MOF/RGO (reduced GO) composite with porous morphology on screen printed carbon electrode (SPCE) which facilitated the electron transfer properties in electrochemical quercetin (QUE) detection. A selective QUE detection ability has been demonstrated by the constructed electrochemical sensor (CuO/(Cu-S)n MOF/RGO/SPCE), which also has a broad dynamic range of 0.5 to 115 µM in pH 3 by differential pulse voltammetry. The detection limit is 0.083 µM (S/N = 3). In this study, it was  observed that the real samples contained 0.34 mg mL-1 and 27.7 µg g-1 QUE in wine and onion, respectively.

Photo-Stimuli-Responsive CuS Nanomaterials as Cutting-Edge Platform Materials for Antibacterial Applications

Photo-stimuli-responsive therapeutic nanomaterials have gained widespread attention as frontline materials for biomedical applications. The photoactivation strategies are classified as single-modality (based on either reactive oxygen species (ROS)-based photodynamic therapy (PDT), hyperthermia-based photothermal therapy (PTT)), or dual-modality (which combines PDT and PTT). Due to its minimal invasiveness, phototherapy has been extensively applied as an efficient therapeutic platform for many diseases, including skin cancers. However, extensive implementation of phototherapy to address the emergence of multidrug-resistant (MDR) bacterial infections remains challenging. This review focuses on copper sulfide (CuS) nanomaterials as efficient and cost-effective PDT and PTT therapeutic nanomaterials with antibacterial activity. The features and merits of CuS nanomaterials as therapeutics are compared to those of other nanomaterials. Control of the dimensions and morphological complexity of CuS nanomaterials through judicious synthesis is then introduced. Both the in vitro antibacterial activity and the in vivo therapeutic effect of CuS nanomaterials and derivative nanocomposites composed of 2D nanomaterials, polymers, metals, metal oxides, and proteins are described in detail. Finally, the perspective of photo-stimuli-responsive CuS nanomaterials for future clinical antibacterial applications is highlighted. This review illustrates that CuS nanomaterials are highly effective, low-toxic, and environmentally friendly antibacterial agents or platform nanomaterials for combatting MDR bacterial infections.

Electrocatalysis of Copper Sulfide Nanoparticle-Engineered Covalent Organic Frameworks for Ratiometric Electrochemical Detection of Amyloid-β Oligomer

Amyloid-β oligomer (AβO) is widely regarded as a reliable biomarker for the early diagnosis of Alzheimer's disease (AD). In this study, a signal on-off ratiometric electrochemical immunosensor has been developed for ultrasensitive detection of AβO. To achieve the dual-signal ratiometric strategy, ultrasmall copper sulfide nanoparticle-engineered covalent organic framework hybrid nanocomposites (CuS@COFs) were utilized as excellent electrocatalysts toward hydroquinone (HQ) oxidation to produce detectable signals. Meanwhile, electroactive thionine (Thi) and Aβ antibody-modified gold nanoparticles (Thi-AuNPs-Ab bioconjugates) were designed as another electrochemical indicator. Based on these two signals, an ultrasensitive sandwich-like electrochemical immunosensor was established for AβO detection. The introduction of AβO resulted in a remarkable decline in the electrochemical signal of HQ but an increase in the signal of Thi. Under optimum conditions, the ratios between the double signals (I_Thi/I_HQ) showed a proportional linear relationship with the AβO concentration (1 pM-1 μM) with a low detection limit of 0.4 pM (S/N = 3), and the biosensor was able to determine the content of AβO in real cerebrospinal fluid samples with satisfactory results. The ratiometric strategy proposed in our study offers a sensitive and efficient approach for early diagnosis of AD, and this work will promote the further applications of engineered COFs in electrochemical sensors.

Strategies, advances, and challenges associated with the use of graphene-based nanocomposites for electrochemical biosensors

Graphene is an intriguing two-dimensional honeycomb-like carbon material with a unique basal plane structure, charge carrier mobility, thermal conductivity, wide electrochemical spectrum, and unusual physicochemical properties. Therefore, it has attracted considerable scientific interest in the field of nanoscience and bionanotechnology. The high specific surface area of graphene allows it to support high biomolecule loading for good detection sensitivity. As such, graphene, graphene oxide (GO), and reduced GO are excellent materials for the fabrication of new nanocomposites and electrochemical sensors. Graphene has been widely used as a chemical building block and/or scaffold with various materials to create highly sensitive and selective electrochemical sensing microdevices. Over the past decade, significant advancements have been made by utilizing graphene and graphene-based nanocomposites to design electrochemical sensors with enhanced analytical performance. This review focus on the synthetic strategies, as well as the structure-to-function studies of graphene, electrochemistry, novel multi nanocomposites combining graphene, limit of detection, stability, sensitivity, assay time. Finally, the review describes the challenges, strategies and outlook on the future development of graphene sensors technology that would be usable for the internet of things are also highlighted.

Constructing Er-Doped ZnO/CuS/Au Core-Shell Nanowires with Enhanced Photocatalytic and SERS Properties

In this study, we fabricated Er-doped ZnO/CuS/Au core-shell nanowires using two-step wet chemical methods and an ion-sputtering method on a glass substrate as a bifunctional photocatalytic and surface-enhanced Raman scattering (SERS) substrate. The characteristic properties of as-prepared photocatalysts were confirmed by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectroscopy, DR/UV-Vis spectroscopy, and photoluminescence spectroscopy. Compared with Er-doped ZnO nanowires and Er-doped ZnO/CuS core-shell nanowires, Er-doped ZnO/CuS/Au core-shell nanowires exhibited remarkably photocatalytic activity to degrade acid orange 7 solutions under blue LED light. These results ascribed to the Er-doped ZnO/CuS/Au core-shell nanowires can enhance the visible-light absorbance and the separation efficiency of photogenerated electron-hole pairs, inducing their higher photocatalytic activity under blue LED light. In addition, Er-doped ZnO/CuS/Au core-shell nanowires exhibit high sensitivity, a low detection limit (10−6 M), uniformity, recyclability, and stability of SERS performance for detected acid orange 7.

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.

Strontium tungstate-modified disposable strip for electrochemical detection of sulfadiazine in environmental samples

Rapid-monitoring of drugs has attracted tremendous consideration owing to robust global demand for cost-effective and high effectiveness. Binary metal oxides with various morphology have been reported as electrodes for electrochemical sensor to fulfilling the clinical and enviromental requirements. In this study, strontium tungstate (SrWO₄) nanoflakes have been successfully prepared via the facile sonochemical method for the first time. The characteristics of as-prepared SrWO₄ are systematically measured by various analytical and spectroscopic methods. The SrWO₄ nanoflakes are utilized to modify the electrochemical electrode for the sulfadiazine (SDZ) determination. The SrWO₄ modified electrode possesses excellent electrocatalytic activity and high recognition capability for the electrochemical detection of SDZ. Impressively, the as-fabricated SrWO₄ modified electrode attainted lowest oxidation peak at +0.93 V (vs Ag/AgCl₂) with the limit of detection of 0.009 μM, the sensitivity of 0.123 µA µM^-1 cm² and linear detection range of 0.05-235 μM. The enhanced performance of proposed SrWO₄-based sensors could be attributed to the catalytic effect, large surface area, good electrical conductivity and physicochemical nature. Notably, the electrocatalytic performances of the SDZ sensors are good as compared to the previous literature, indicating the significance of the newly designed SrWO₄ modified electrode. The real-sample diagnosis by the SDZ detection in environmental sample demonstrates the proposed SrWO₄-based sensors with good recovery range.