Sonocatalytic degradation of tetracycline hydrochloride with CoFe2O4/g-C3N4 composite

Extended Interfacial Charge Transference in CoFe2O4/WO3 Nanocomposites for the Photocatalytic Degradation of Tetracycline Antibiotics

The large-scale utilization of antibiotics has opened a separate chapter of pollution with the generation of reactive drug-resistant bacteria. To deal with this, in this work, different mass ratios of CoFe2O4/WO3 nanocomposites were prepared following an in situ growth method using the precursors of WO3 and CoFe2O4. The structure, morphology, and optical properties of the nanocomposite photocatalysts were scrutinized by X-ray diffraction (XRD), UV-visible diffuse reflectance spectra (UV-Vis DRS), photoluminescence spectrum (PL), etc. The experimental data signified that the loading of CoFe2O4 obviously changed the optical properties of WO3. The photocatalytic performance of CoFe2O4/WO3 composites was investigated by considering tetracycline as a potential pollutant. The outcome of the analyzed data exposed that the CoFe2O4/WO3 composite with a mass ratio of 5% had the best degradation performance for tetracycline eradication under the solar light, and a degradation efficiency of 77% was achieved in 20 min. The monitored degradation efficiency of the optimized photocatalyst was 45% higher compared with the degradation efficiency of 32% for pure WO3. Capturing experiments and tests revealed that hydroxyl radical (·OH) and hole (h+) were the primary eradicators of the target pollutant. This study demonstrates that a proper mass of CoFe2O4 can significantly push WO3 for enhanced eradication of waterborne pollutants.

Sonocatalytic degradation of tetracycline hydrochloride using SnO2 hollow-nanofiber decorated with UiO-66-NH2

In this study, a porous hollow nanofiber SnO2 was decorated with UiO-66-NH2 nanoparticles with straightforward solvothermal method and utilized for sonocatalytic degradation of tetracycline (TC) by ultrasonic irradiation (USI). The prepared materials were characterized using different techniques such as SEM, EDS, FTIR, XRD, BET, XPS, UV-DRS, EIS, and zeta potential. SnO2 PHNF/UiO-66-NH2 nanocomposite offered the highest apparent rate constant of 0.0397 min-1 which was 6.3 and 3.1 times higher than those obtained for SnO2 PHNF and UiO-66-NH2, respectively. The integration of nanocomposite components revealed the synergy factor of 1.58, which can be due to the created heterojunctions resulted in efficiently charge carriers separation and retaining high redox ability. The effects of different affecting parameters such as TC initial concentration, pH of the solution, catalyst dosage, trapping agents, and coexisting anions on the catalytic performance were examined. The inhibitory effects of anions were confirmed to be decreased in the sequence of Cl- > NO3- > SO42-, while the sonocatalytic efficiency of the nanocomposite improved considerably in the presence of humic acid and bicarbonate. Also, the excellent performance of the catalyst was preserved during six successive cycles, suggesting the high stability of the prepared catalyst. In addition, based on the scavenger analysis, the created O2·-, OH·, and holes were contributed to the TC degradation. In conclusion, the creation heterojunction is an impressive methodology for improving the sonocatalytic activity of a catalyst, and SnO2 PHNF/UiO-66-NH2 nanocomposite was introduced as a satisfactory catalyst in sonocatalytic degradation of organic contaminants.

Multi-chamber membrane capacitive deionization coupled with peroxymonosulfate to achieve simultaneous removal of tetracycline and peroxymonosulfate reaction byproducts

Advanced oxidation technologies based on peroxymonosulfate (PMS) have been extensively applied for the degradation of antibiotics. However, the degradation process inevitably introduces SO42- and other sulfur-containing anions, these pollutants pose a huge threat to the water and soil environment. Addressing these concerns, this study introduced PMS oxidation into a multi-chamber membrane capacitive deionization (MC-MCDI) device to achieve simultaneous tetracycline (TC) degradation and removal of PMS reaction byproduct ions. The experimental results demonstrated that when the TC solution (40 mg L-1) was pre-adsorbed for 10 min, the voltage was 1.2 V and the concentration of PMS solution added was 4 mg mL-1, the removal efficiency of TC and ion can reach 77.4 % and 46.5 % respectively. Furthermore, the activation process of PMS in MC-MCDI/PMS system and the reactive oxygen (ROS) that mainly produce degradation were deeply investigated. Finally, liquid chromatography-mass spectrometry (LC-MS) was employed to identify intermediates of TC degradation, propose potential degradation pathways, and analyze the toxicities of the intermediates. In addition, in five cycles, the MC-MCDI/PMS system demonstrated excellent stability. This study provides an effective strategy for treating TC wastewater and a novel approach for simultaneous TC degradation and desalination.

Bimetallic Ag/Fe-MOG derived flake-like Ag2O/Fe2O3 p-n heterojunction for efficient photodegradation organic pollutants within a wide pH range

In this paper, we reported a facile and clean strategy to prepare the flake-like Ag2O/Fe2O3 bimetallic p-n heterojunction composites for photodegradation organic pollutants. The surface morphology, crystal structure, chemical composition and optical properties of Ag2O/Fe2O3 were characterized by SEM, high-resolution TEM images with EDX spectra, XRD, XPS, FT-IR and UV-vis DRS spectra respectively. The formation of Ag2O/Fe2O3 p-n heterojunction facilitated the interfacial transfer of electrons as well as the separation of charge carries. Hence, the as-synthesized Ag2O/Fe2O3-3 composites exhibited ultra-high photocatalytic activity. Under the experimental conditions of catalyst dosage of 0.4 mg mL-1 and irradiation time of 60 min, the degradation conversion rate of rhodamine B reached 96.1 %, which was 5.0 and 2.8 times of pure phase Ag2O and Fe2O3, respectively. Meanwhile, the degradation performance of Ag2O/Fe2O3-3 was not limited by pH, and it can achieve high degradation efficiency under 3-11. In addition, Ag2O/Fe2O3-3 also showed superb degradation ability for other common anionic dyes, cationic dyes and antibiotics. XPS and FT-IR spectra showed that Ag2O/Fe2O3-3 retained a carbon skeleton that facilitated electron transport and light absorption conversion. And the analyses of quenching experiment and EPR demonstrated •O2-, •OH and h+ were crucial reactive oxidant species contributing to the rapid organic pollutant degradation. This work provides new insights into obtaining p-n photocatalysts heterojunction with excellent catalytic activity for removing organic pollutants from wastewater.

Photodegrading rhodamine B dye with cobalt ferrite-graphitic carbon nitride (CoFe2O4/g-C3N4) composite

The present research utilizes a sol-gel approach to create a CoFe2O4/g-C3N4 nanocomposite (NC) and explored several analytical methods to evaluate physical, chemical and optical based characteristics via XRD, FTIR, UV-vis, SEM/EDS and XPS for the prepared pure CoFe2O4, g-C3N4, and CoFe2O4/g-C3N4 NC. The XRD results show that the prepared g-C3N4, CoFe2O4, exhibits hexagonal and cubic phases respectively, whereas the g-C3N4/CoFe2O4 NC exhibit mixing of two phases. The energy band gaps for pure g-C3N4, CoFe2O4 and g-C3N4/CoFe2O4 NC values are viz., 2.75, 1.3, and 2.4 eV. As photocatalysts, synthesized materials were utilized for the decomposition of Rhodamine-B (RhB) dye. Finally, the CoFe2O4/g-C3N4 NC showed good performance of photocatalysis for RhB dye disintegration under the stimulus of visible light. According to the induced visible light, the rate at which the photocatalytic degradation occurs for the CoFe2O4/g-C3N4 NC was found to be 57% in 120 min and this is greater when compared with pure catalysts like CoFe2O4 (28%) and g-C3N4 (10%). These outcomes suggest that the prepared NC have efficiently worked during the photocatalytic process compared with its pure materials.

Synthesis of magnetic layered double hydroxide (Fe3O4@CuCr-LDH) decorated with ZIF-8 for efficient sonocatalytic degradation of tetracycline

A series of Fe3O4@CuCr-LDH hybrids decorated with different amount of ZIF-8 (FLZ, 10-40 wt%) was prepared using simple methods and characterized with different techniques. The activity of the synthesized nanocomposites was investigated in the sonocatalytic degradation of tetracycline (TC) antibiotic from wastewater. When the content of ZIF-8 in the nanocomposite structure was 20 wt%, the FLZ-20 sonocatalyst exhibited the high performance in the sonocatalytic removal of TC. At optimum conditions (0.7 g/L catalyst dosage, pH of 7, 50 mg/L initial concentration of antibiotic, and 15 min sonication time) of the sonocatalytic removal of TC approached to 91.4% under ultrasonic irradiation (USI) using FLZ-20. This efficiency was much higher than those of obtained results by Fe3O4@CuCr-LDH and pristine ZIF-8. The formed ●OH and ●O2- exhibited the major roles in the sonocatalytic TC degradation process. The excellent performance of FLZ-20 can be attributed to the heterojunctions created between composite components, which could improve the electron transfer ability and effectively separate e-/h+ pairs. In addition, FLZ-20 showed the superior reusability and stability during three successive recycling. Moreover, the facile magnetically separation of the sonocatalyst from the aqueous solution was another outstanding feature, which prevents the formation of secondary pollutants. It can be concluded that the fabrication of heterojunctions is an efficient procedure to promote the sonocatalytic acting of the catalyst.

Charge transfer in TiO2-based photocatalysis: fundamental mechanisms to material strategies

Semiconductor-based photocatalysis has attracted significant interest due to its capacity to directly exploit solar energy and generate solar fuels, including water splitting, CO2 reduction, pollutant degradation, and bacterial inactivation. However, achieving the maximum efficiency in photocatalytic processes remains a challenge owing to the speedy recombination of electron-hole pairs and the limited use of light. Therefore, significant endeavours have been devoted to addressing these issues. Specifically, well-designed heterojunction photocatalysts have been demonstrated to exhibit enhanced photocatalytic activity through the physical distancing of electron-hole pairs generated during the photocatalytic process. In this review, we provide a systematic discussion ranging from fundamental mechanisms to material strategies, focusing on TiO2-based heterojunction photocatalysts. Current efforts are focused on developing heterojunction photocatalysts based on TiO2 for a variety of photocatalytic applications, and these projects are explained and assessed. Finally, we offer a concise summary of the main insights and challenges in the utilization of TiO2-based heterojunction photocatalysts for photocatalysis. We expect that this review will serve as a valuable resource to improve the efficiency of TiO2-based heterojunctions for energy generation and environmental remediation.

Activities of BiFeO3/carbon-dots catalysts in piezo-photocatalytic degradation of ciprofloxacin upon light/ultrasonic excitation

Designing catalysts that can effectively make use of renewable energy benefits to solve the current challenges of environmental pollution and increasing energy demands. Piezo-photocatalysis that can utilize solar energy and natural vibration-energy has emerged as a "green" technique. In this work, we fabricated BiFeO3/C nano composites that can harvest solar and vibration energies and degrade organic pollutants. The incorporated carbon quantum dots bring about more efficient visible light absorbance and separation of photoinduced electron-hole pairs. The piezoelectric polarization further suppresses the recombination of photoinduced electron-hole pairs. The catalysts own higher reaction rates in piezo-photocatalysis and the BiFeO3/C-0.12 shows the highest degradation efficiency (k-value of 0.0835 min-1).

Highly efficient ultrasound-driven Cu-MOF/ZnWO4 heterostructure: An efficient visible-light photocatalyst with robust stability for complete degradation of tetracycline

Metal-organic frameworks (MOFs) are a significant class of porous, crystalline materials composed of metal ions (clusters) and organic ligands. The potential use of copper MOF (Cu-BTC) for the sonophotocatalytic degradation of Tetracycline (TC) antibiotic was investigated in this study. To enhance its catalytic efficiency, S-scheme heterojunction was created by combining Cu-BTC with Zinc tungstate (ZnWO4), employing an ultrasound-assisted hydrothermal method. The results demonstrated that the Cu-BTC/ZnWO4 heterojunction exhibited complete removal of TC within 60 min under simultaneous irradiation of visible light and ultrasound. Interestingly, the sonophotocatalytic degradation of TC using the Cu-BTC/ZnWO4 heterojunction showed superior efficiency (with a synergy index of ∼0.70) compared to individual sonocatalytic and photocatalytic degradation processes using the same heterojunction. This enhancement in sonophotocatalytic activity can be attributed to the formation of an S-scheme heterojunction between Cu-BTC and ZnWO4. Within this heterojunction, electrons migrated from Cu-BTC to ZnWO4, facilitated by the interface between the two materials. Under visible light irradiation, the built-in electric field, band edge bending, and coulomb interaction synergistically inhibited the recombination of electron-hole pairs. Consequently, the accumulated electrons in Cu-BTC and holes in ZnWO4 actively participated in the redox reactions, generating free radicals that effectively attacked the TC molecules. This study offers valuable perspectives on the application of a newly developed S-scheme heterojunction photocatalyst, demonstrating its effectiveness in efficiently eliminating diverse recalcitrant pollutants via sonophotocatalytic degradation.

Nanomaterials for photo-electrochemical water splitting: a review

Over the last few decades, the global rise in energy demand has prompted researchers to investigate the energy requirements from alternative green fuels apart from the conventional fossil fuels, due to the surge in CO2 emission levels. In this context, the global demand for hydrogen is anticipated to extend by 4-5% in the next 5 years. Different production technologies like gasification of coal, partial oxidation of hydrocarbons, and reforming of natural gas are used to obtain high yields of hydrogen. In present time, 96% of hydrogen is produced by the conventional methods, and the remaining 4% is produced by the electrolysis of water. Photo-electrochemical (PEC) water splitting is a promising and progressive solar-to-hydrogen pathway with high conversion efficiency at low operating temperatures with substrate electrodes such as fluorine-doped tin oxide (FTO), incorporated with photocatalytic nanomaterials. Several semiconducting nanomaterials such as carbon nanotubes, TiO2, ZnO, graphene, alpha-Fe2O3, WO3, metal nitrides, metal phosphides, cadmium-based quantum dots, and rods have been reported for PEC water splitting. The design of photocatalytic electrodes plays a crucial role for efficient PEC water splitting process. By modifying the composition and morphology of photocatalytic nanomaterials, the overall solar-to-hydrogen (STH) energy conversion efficiency can be improved by optimizing their opto-electronic properties. The present article highlights the recent advancements in cleaner and effective photocatalysts for producing high yields of hydrogen via PEC water splitting.

Titanium doped cobalt ferrite fabricated graphene oxide nanocomposite for efficient photocatalytic and antibacterial activities

Dyes and microbes are the main sources of water pollution and their treatment with titanium doped cobalt ferrite nanoparticles (CoTixFe2-xO4 NPs) is highly challenging due to the recombination ability of their electron-hole pairs which could be mitigated by making their composite with graphene oxide (GO). In the present study, titanium doped cobalt ferrite was fabricated on GO (CoTi0.2Fe1.8O4/GO NC) via the facile ultrasonication method and its confirmation was done by various analytical studies. Homogeneous dispersion of spherical CoTi0.2Fe1.8O4 NPs on the GO surface was realized by SEM analysis. Excellent crystallinity was corroborated by XRD while a Zeta Potential value -21.52 mV depicted exceptional stability. The photocatalytic power of CoTi0.2Fe1.8O/GO NC against Congo Red (CR) dye showed 91% degradation efficiency after 120 min visible light irradiation under optimum conditions of pH 9 and dye concentration 1 mg L-1 which was reasonably higher as compared to bare CoTi0.2Fe1.8O NPs (78% degradation efficiency). The improved photocatalytic performance is accredited to its narrow bandgap value (1.07 eV) and enhanced charge separation as indicated by the Tauc plot and Photoluminescence analysis, respectively. Additionally, CoTi0.2Fe1.8O/GO NC could be readily regenerated and reused five times with only ∼2% performance loss. Meanwhile, MICs of CoTi0.2Fe1.8O4/GO NC against P. aeruginosa and S. aureus were 0.046 and 0.093 mg mL-1 while MBCs were 0.093 and 0.187 mg mL-1, respectively. Thereby, optimized NC can open new avenues for the degradation of dyes from polluted water besides acting as a promising antimicrobial agent by rupturing the cell walls of pathogens.

Synergistic effects of layered Ti3C2TX MXene/MIL-101(Cr) heterostructure as a sonocatalyst for efficient degradation of sulfadiazine and acetaminophen in water

In this work, different mass loadings of MXene-coupled MIL-101(Cr) (MXe/MIL-101(Cr)) nanocomposites were generated through a hydrothermal process in order to investigate the potential of this nanocomposite as a novel sonocatalyst for the elimination of sulfadiazine (SD) and acetaminophen (AAP) in aqueous media. The sonocatalytic activity of different MXe/MIL-101(Cr) compositions and surface functionalities was investigated. In addition, the sonocatalytic activities at various pH values, temperatures, pollutant concentrations, catalyst dosages, initial H2O2 concentrations, and organic matter contents were investigated. The experiments on the sonocatalytic elimination of SD and AAP revealed that MXe/MIL-101(Cr) exhibited a catalytic efficiency of ∼ 98% in 80 min when the MXene loading was 30 wt% in the nanocomposite. Under optimized reaction conditions, the degradation efficiency of MXe/MIL-101(Cr) reached 91.5% for SD and 90.6% for AAP in 60 min; these values were 1.2 and 1.8 times greater than those of MXene and MIL-101(Cr), respectively. The high surface area of the MXe/MIL-101(Cr) nanocomposite increased from 4.68 m2/g to 294.21 m2/g, and the band gap of the tagged MIL-101(Cr) on the MXene surface was minimized. The superior sonocatalytic activity of MXe/MIL-101(Cr) was attributed to the effective contact interface, the effective separation rate of e- - h+ pairs through the type II heterostructure interface, and the favorable high free •OH radical production rates that promoted the degradation of SD and AAP. The solid heterointerface between MIL-101(Cr) and MXene was confirmed through Raman and FTIR analysis and was found to promote accessible •OH radical production under sonication, thus maximizing the catalytic activity of nanocomposites. The present results present an effective strategy for the design of a highly efficient, low-cost, reliable sonocatalyst that can eradicate pharmaceutical pollutants in our environment.

CdS nanocrystallites sensitized ZnO nanosheets for visible light induced sonophotocatalytic/photocatalytic degradation of tetracycline: From experimental results to a generalized model based on machine learning methods

CdS/ZnO nanosheets heterostructures ((x)CdS/ZNs) with different mole ratios of Cd/Zn ((x) = 0.2, 0.4, and 0.6) were synthesized by the impregnation-calcination method. PXRD patterns showed that the (100) diffraction of ZNs was the most significant in the (x)CdS/ZNs heterostructures, and it confirmed that CdS nanoparticles (in cubic phase) occupied the (101) and (002) crystal facets of ZNs with hexagonal wurtzite crystal phase. UV-Vis DRS results indicated that CdS nanoparticles decreased the band gap energy of ZNs (2.80-2.11 eV) and extended the photoactivity of ZNs to the visible light region. The vibrations of ZNs were not observed clearly in the Raman spectra of (x)CdS/ZNs due to the extensive coverage of CdS nanoparticles shielding the deeper-laying ZNs from Raman response. The photocurrent of (0.4) CdS/ZNs photoelectrode reached 33 μA, about 82 times higher than that for ZNs (0.4 μA, 0.1 V vs Ag/AgCl). The formation of an n-n junction at the (0.4) CdS/ZNs reduced the recombination of electron-hole pairs and increased the degradation performance of the as-prepared (0.4) CdS/ZNs heterostructure. The highest percentage removal of tetracycline (TC) in the sonophotocatalytic/photocatalytic processes was obtained by (0.4) CdS/ZNs under visible light. The quenching tests showed that O₂^•-, h⁺, and OH^• were the main active species in the degradation process. The degradation percentage decreased negligibly in the sonophotocatalytic (84%-79%) compared to the photocatalytic (90%-72%) process after four re-using runs due to the presence of ultrasonic waves. For the estimation of degradation behavior, two machine learning methods were applied. The comparison between the ANN and GBRT models evidenced that both models had high prediction accuracy and could be used for predicting and fitting the experimental data of the %removal of TC. The excellent sonophotocatalytic/photocatalytic performance and stability of the fabricated (x)CdS/ZNs catalysts made them promising candidates for wastewater purification.

Application of Photocatalysis and Sonocatalysis for Treatment of Organic Dye Wastewater and the Synergistic Effect of Ultrasound and Light

Organic dyes play vital roles in the textile industry, while the discharge of organic dye wastewater in the production and utilization of dyes has caused significant damage to the aquatic ecosystem. This review aims to summarize the mechanisms of photocatalysis, sonocatalysis, and sonophotocatalysis in the treatment of organic dye wastewater and the recent advances in catalyst development, with a focus on the synergistic effect of ultrasound and light in the catalytic degradation of organic dyes. The performance of TiO₂-based catalysts for organic dye degradation in photocatalytic, sonocatalytic, and sonophotocatalytic systems is compared. With significant synergistic effect of ultrasound and light, sonophotocatalysis generally performs much better than sonocatalysis or photocatalysis alone in pollutant degradation, yet it has a much higher energy requirement. Future research directions are proposed to expand the fundamental knowledge on the sonophotocatalysis process and to enhance its practical application in degrading organic dyes in wastewater.

Biogenic Preparation of ZnO Nanostructures Using Leafy Spinach Extract for High-Performance Photodegradation of Methylene Blue under the Illumination of Natural Sunlight

To cope with environmental pollution caused by toxic emissions into water streams, high-performance photocatalysts based on ZnO semiconductor materials are urgently needed. In this study, ZnO nanostructures are synthesized using leafy spinach extract using a biogenic approach. By using phytochemicals contained in spinach, ZnO nanorods are transformed into large clusters assembled with nanosheets with visible porous structures. Through X-ray diffraction, it has been demonstrated that leafy spinach extract prepared with ZnO is hexagonal in structure. Surface properties of ZnO were altered by using 10 mL, 20 mL, 30 mL, and 40 mL quantities of leafy spinach extract. The size of ZnO crystallites is typically 14 nanometers. In the presence of sunlight, ZnO nanostructures mineralized methylene blue. Studies investigated photocatalyst doses, dye concentrations, pH effects on dye solutions, and scavengers. The ZnO nanostructures prepared with 40 mL of leafy spinach extract outperformed the degradation efficiency of 99.9% for the MB since hydroxyl radicals were primarily responsible for degradation. During degradation, first-order kinetics were observed. Leafy spinach extract could be used to develop novel photocatalysts for the production of solar hydrogen and environmental hydrogen.