First fertilizing-value typology of digestates: A decision-making tool for regulation

Retention time and organic loading rate as anaerobic co-digestion key-factors for better digestate valorization practices: C and N dynamics in soils

The growing use of anaerobic co-digestion (AcoD) in processing organic waste has led to a significant digestate production. To effectively recycle digestate back into soils, it is crucial to understand how operational variables in the AcoD process influence the conversion of organic matter (OM). To address this, a combination of biochemical fractionation and various soil incubation tests were employed to assess the stability of OM in digestates generated from anaerobic continuous reactors fed with a food waste-hay mixture and operating at different hydraulic retention times (HRT) and organic loading rates (OLR). This study revealed that digester performance and operating parameters impacted carbon dynamics in soils. A decrease in the carbon mineralization in soils when increasing the HRT was reported (48 ± 4 % for 70 days compared to 59 ± 1 % for 42 days). Specific HRT and OLR values were found to be linked to carbon accessibility and complexity, confirming that longer HRT lead to higher OM removal and increased complexity in soluble OM, despite minor discrepancies in relative carbon distribution. Furthermore, comparable rates of nitrogen mineralization in soils were observed for all digestates, consistent with the accessibility of nitrogen from the particulate OM. Nevertheless, AcoD converted substrates with the potential to immobilize nitrogen in soils into fast-acting fertilizers. In summary, this study underscores the importance of controlling the AcoD performances to evaluate the suitability of digestates for sustainable agricultural practices.

Correlations and impact of anaerobic digestion operating parameters on the start-up duration: Database construction for robust start-up guidelines

Anaerobic digestion (AD) has become a popular technique for organic waste management while offering economic and environmental advantages. As AD becomes increasingly prevalent worldwide, research efforts are primarily focused on optimizing its processes. During the operation of AD systems, the occurrence of unstable events is inevitable. So far, numerous conclusions have been drawn from full and lab-scale studies regarding the driving factors of start-up perturbations. However, the lack of standardized practices reported in start-up studies raises concerns about the comparability and reliability of obtained data. This study aims to develop a knowledge database and investigate the possibility of applying machine learning techniques on experimentation-extracted data to assist start-up planning and monitoring. Thus, a standardized database referencing 75 cases of start-up of one-stage wet continuously-stirred tank reactors (CSTR) processing agricultural, industrial, or municipal organic effluent in mono-digestion from 31 studies was constructed. 10 % of the total observations included in this database concern failed start-up experiments. Then, correlations between the parameters and their impacts on the start-up duration were studied using multivariate analysis and a model-based ranking methodology. Insights into trends of choices were highlighted through the correlation analysis of the database. As such, scenarios favoring short start-up duration were found to involve relatively low retention times (average initial and final hydraulic retention times, (HRTi) and (HRTf) of 26.25 and 20.6 days, respectively), high mean organic loading rates (average OLRmean of 5.24 g VS·d-1·L -1) and the processing of highly fermentable substrates (average feed volatile solids (VSfeed) of 81.35 g L-1). The model-based ranking of AD parameters demonstrated that the HRTf, the VSfeed, and the target temperature (Tf) have the strongest impact on the start-up duration, receiving the highest relative scores among the evaluated AD parameters. The database could serve as a reference for comparison purposes of future start-up studies allowing the identification of factors that should be closely controlled.

Preparation of ceramsite using solid residue from anaerobic digestion of waste activated sludge and its enhancing effect on catalytic ozonation

Anaerobic digestion is an environmentally friendly method for reclaiming waste activated sludge. However, it cannot be overlooked that the solid residue generated from this process can still pose environmental risks and impose economic pressure on society. To mitigate and recycle the solid residue, this study utilized it as a primary raw material for manufacturing ceramsite with potential applications in wastewater treatment. The optimal ratio of solid residue to fly ash was demonstrated to be 6:4 with an additional 15% of clay supplementing the raw ceramsite materials. Furthermore, the optimal sintering process was established as preheating at 300 °C for 25 min followed by sintering at 1085 °C for 10 min, as determined through an L16 (44) Orthogonal test. The prepared ceramsite demonstrated advantageous performance parameters that exceeded the standards outlined in the Chinese industry standard CJ/T 299-2008 for water treatment artificial ceramsite. When utilized in an ozonation system, the ceramsite exhibited remarkable catalytic activity for phenol degradation by promoting the decomposition of molecular O3 into hydroxyl radicals. Additionally, it displayed minimal leaching of heavy metals and lower application costs. These findings emphasize its attractiveness in water and wastewater treatment processes and present a practical strategy for reclaiming this solid residue.

Characteristics of the digestates from OFMSW methane production at psychrophilic, mesophilic, and thermophilic conditions under different organic loading rates

The anaerobic digestion of the organic fraction of municipal solid waste (OFMSW) has shown to be a viable alternative since it allows energy recovery in the form of methane and generates a residue (digestate) that can be applied effectively as a soil improver or fertiliser. The potential for methane production and the digestates' characteristics depend on the substrate characteristics and the process variables such as temperature, solids retention time, and organic load. This study dealt with OFMSW anaerobic digestion under different organic loading rates and temperatures and the characteristics of the resulting digestates. Three semi-continuous reactors were operated at 20, 35, and 55°C and fed daily with ground, fresh OFMSW from Mexico City. The inoculum was temperature-adapted UASB granular sludge. The main results indicate that the anaerobic digestion was adequate, as the pH values were slightly alkaline, which is sufficient for methanization, and the alkalinity was not a limiting factor. Potassium and PO4-P increased with the organic load, and Kjeldahl nitrogen decreased. At 20°C, total organic carbon (TOC) increased substantially with the organic load; at 35°C, it remained without significant changes; and at 55°C, TOC slightly decreased with the organic load. The C/N ratio changed accordingly to TOC variations. At 20°C, the residual biogas potential increased with the organic load; at 35 and 55°C, it decreased with increasing organic load; the residual biogas potential increased with residual fatty acids concentrations. To comply with international standards for agricultural use, the digestates need only dewatering and supplementing with PO4-P.

Composting and vermicomposting of sewage sludge at various C/N ratios: Technological feasibility and end-product quality

Even though sewage sludge (SS) contains a high level of pollutants, it is rich in essential plant nutrients and has the potential to enhance soil fertility. However, the SS must be further treated through pre-composting plus vermicomposting to make it safe for use on food crops. More research and data are needed to determine how different carbon-to-nitrogen ratios (C/N) affect the feasibility and quality of composting vs vermicomposting of SS. Therefore, in this study we comprehensively evaluated the feasibility and end-product quality of compost and vermicompost produced from SS under different C/N ratios. SS was mixed with pelletized wheat straw (PWS) at various proportions to produce C/N ratios of 6:1, 18:1, 28:1, and 38:1, then pre-composted for 14 days followed by vermicomposting using the earthworm Eisenia andrei for 120 days. Agrochemical properties were measured at 0, 30, 60, 90, and 120 days. Results revealed significantly higher levels of agrochemicals in vermicompost compared to compost, including total potassium (37-88%) and magnesium (4.3-12%), nitrate nitrogen (71-98%), available potassium (53-88%), available phosphorus (79%), available magnesium (54-453%), available boron (48-303%), and available copper (2.5-82%). However, lower levels of ammonium nitrogen by (59-85%), available iron (2.3-51.3%), available manganese (29.7-52.2%), available zinc (10.5-29.8%), total carbon (0.75-4.5%), and total nitrogen (1.6-22.2%) were measured. Comparison of the various C/N ratios, showed that vermicompost with an 18:1 C/N ratio outperformed compost and demonstrated the highest earthworm population (165 pieces/kg). Thus, vermicomposting SS at an 18:1 C/N ratio is strongly recommended as a sustainable technology for producing high-quality vermicompost from SS.

Nutrient challenges with solid-phase anaerobic digestate as a peat substitute - Storage decreased ammonium toxicity but increased phosphorus availability

The solid fraction (SD) obtained after liquid - solid separation of anaerobic digestate is interesting as a potential fertilizer as well as a peat substitute in horticultural growing substrates. We investigated the effect of incubation of the SD obtained by screw-press separation of digestate produced from food waste and plant residues on potentially plant available mineral nutrients and plant growth. The NH₄-N concentration was initially > 1000 mg L^-1 but rapidly decreased, probably due to NH₃ emission promoted by a high initial pH. No nitrate was detected during the first four weeks of incubation. The concentrations of potentially available P and Mg were closely related and strongly increased during incubation. The effect of adding 20 or 30 vol% of SD to a peat-based growing substrate on the growth of basil and lettuce was investigated before and after the incubation period. With the unincubated SD, the initial substrate NH₄-N of 200-300 mg L^-1 was potentially phytotoxic. Plant growth response ranged from inhibition to stimulation, probably reflecting variation in substrate ammonium status. After 96 days of incubation, ammonium concentrations had decreased with > 50% and basil growth was generally positively affected by addition of incubated SD. However, available P concentrations of 140-210 mg L^-1 in the incubated substrates posed a high risk of P leakage. In conclusion, storage greatly reduced NH₄-N concentrations and phytotoxicity when the SD was used as a partial substituent for peat in a horticultural growing substrate. Measures are needed, however, to limit available P concentrations in high-P solid digestate fractions.

Developing a biogas centralised circular bioeconomy using agricultural residues - Challenges and opportunities

Anaerobic digestion (AD) can be used as a stand-alone process or integrated as part of a larger biorefining process to produce biofuels, biochemicals and fertiliser, and has the potential to play a central role in the emerging circular bioeconomy (CBE). Agricultural residues, such as animal slurry, straw, and grass silage, represent an important resource and have a huge potential to boost biogas and methane yields. Under the CBE concept, there is a need to assess the long-term impact and investigate the potential accumulation of specific unwanted substances. Thus, a comprehensive literature review to summarise the benefits and environmental impacts of using agricultural residues for AD is needed. This review analyses the benefits and potential adverse effects related to developing biogas-centred CBE. The identified potential risks/challenges for developing biogas CBE include GHG emission, nutrient management, pollutants, etc. In general, the environmental risks are highly dependent on the input feedstocks and resulting digestate. Integrated treatment processes should be developed as these could both minimise risks and improve the economic perspective.

SoilFract: A mechanistic model accounting for the fate of exogenous organic matter in soil carbon and nitrogen cycles

As its use in agriculture grows, the fate of digestate in soil raises concerns on many different levels. In particular, the degradability of its organic matter when spread on soil is still an ongoing topic. In an effort to better understand the processes and dynamics of digestate soil incubation, C and N mineralization kinetics obtained in 358 days long laboratory incubations during decomposition of digestates were simulated using a dynamic model. The model includes twelve compartments related through processes including 18 parameters. The main novelty of this model is the use of accessibility-related variables to describe the fate of exogenous organic matter in soil, thus enabling a detailed understanding of its outcome in soil. Model calibration on cattle manure digestate incubation resulted in the estimation of parameter values. The newly calibrated model was then tested on an energy crop digestate incubation experiment. The model was able to reproduce accurately the experimental behavior of most variables.

Balance of total mass and nitrogen fluxes through consecutive digestate processing steps: Two application cases

The high water content and low nutrient concentration of digestate complicate its storage, transportation, and utilization. Subsequent digestate processing can effectively remove water and influence nutrient partitioning among digestate fractions and final products. The current study was carried out to evaluate the performance of two typical digestate processing chains, solid and liquid ones, respectively, and to give practical recommendations for optimization. Two fully operating biogas plants with advanced heat utilization were considered as data sources. The digestate mass flow balance of dry matter (DM), water, total N (TN), and ammonium-N mass flows was performed and the efficiency of the examined processing units was calculated. It was found that solid-liquid separation of raw digestate shifted 73-87% of TN and 60-93% of NH4-N to the liquid phase. Subsequent drying of separated solid fraction removed about 6% of the initial water and required 84% less thermal energy per kg N recovered than the processing of separated liquid. The final product, pellets, contained 14% of initial TN, but only 2% of initial NH4-N as a result of microbial conversion of inorganic N during drying. Vacuum evaporation of separated liquid fraction removed 34% of the initial water and left a DM-rich concentrate. At the same time, an ammonium sulfate solution (ASS) containing 21% of initial TN and 34% of initial NH4-N was produced. Both evaluated processing chains showed specific advantages and challenges. Solid products were characterized by a high share of recalcitrant organic compounds and could serve as a soil improver. Liquid processing concentrated plant-available N in ASS, which could be used as valuable inorganic fertilizer.

Evaluating the impact of substrate addition for anaerobic co-digestion on biogas production and digestate quality: The case of deinking sludge

To reduce greenhouse gas emissions from organic waste, anaerobic digestion has created new opportunities for energy and nutrient recovery from these wastes. However, the use of certain organic wastes in anaerobic digestion is limited due to their atypical physicochemical characteristics (e.g. unbalanced carbon to nitrogen ratio, high ash concentration). Deinking sludge is a residue from the paper recycling industry and is one of such substrates. This study aims at evaluating the impact of deinking sludge (DS) addition into a conventional co-digestion mixture on methane production and digestate quality. To this end, an integrated method was proposed, combining the analysis of physicochemical and biodegradability characteristics with parsimonious modeling using the SYS-Metha tool. The measured characteristics of the deinking sludge showed that its potential use in mono-digestion conditions is very limited. When co-digested with food waste and municipal sludge, no significant synergies or antagonisms were found. Based on these experiments, model simulations were executed to determine the optimal conditions for co-digestion with food waste and municipal sludge. A maximum of 22% of deinking sludge on a fresh mass basis can be added into a co-digestion mixture to achieve proper wet anaerobic digestion conditions. Regarding digestate quality, the addition of DS reduced nutrient and contaminants concentrations, which have an impact on digestate management, particularly for land application. Overall, the proposed methodology in this study allows determining optimal co-digestion mixtures and highlighted the limits needing further investigation under pilot/real conditions.

Agronomic characterization of anaerobic digestates with near-infrared spectroscopy

Anaerobic digestion is an increasingly widespread process for organic waste treatment and renewable energy production due to the methane content of the biogas. This biological process also produces a digestate (i.e., the remaining content of the waste after treatment) with a high fertilizing potential. The digestate composition is highly variable due to the various organic wastes used as feedstock, the different plant configurations, and the post-treatment processes used. In order to optimize digestate spreading on agricultural soils by optimizing the fertilizer dose and, thus, reducing environmental impacts associated to digestate application, the agronomic characterization of digestate is essential. This study investigates the use of near infrared spectroscopy for predicting the most important agronomic parameters from freeze-dried digestates. A data set of 193 digestates was created to calibrate partial least squares regression models predicting organic matter, total organic carbon, organic nitrogen, phosphorus, and potassium contents. The calibration range of the models were between 249.8 and 878.6 gOM.kgDM^-1, 171.9 and 499.5 gC.kgDM^-1, 5.3 and 74.1 gN.kgDM^-1, 2.7 and 44.9 gP.kgDM^-1 and between 0.5 and 171.8 gK.kgDM^-1, respectively. The calibrated models reliably predicted organic matter, total organic carbon, and phosphorus contents for the whole diversity of digestates with root mean square errors of prediction of 70.51 gOM.kgDM^-1, 34.84 gC.kgDM^-1 and 4.08 gP.kgDM^-1, respectively. On the other hand, the model prediction of the organic nitrogen content had a root mean square error of 7.55 gN.kgDM^-1 and was considered as acceptable. Lastly, the results did not demonstrate the feasibility of predicting the potassium content in digestates with near infrared spectroscopy. These results show that near infrared spectroscopy is a very promising analytical method for the characterization of the fertilizing value of digestates, which could provide large benefits in terms of analysis time and cost.

Microalgae Cultivation on Nutrient Rich Digestate: The Importance of Strain and Digestate Tailoring under PH Control

The bioremediation of digestate using microalgae presents a solution to the current eutrophication issue in Northwest Europe, where the use of digestate as soil fertiliser is limited, thus resulting in an excess of digestate. Ammonium is the main nutrient of interest in digestate for microalgal cultivation, and improving its availability and consequent uptake is crucial for optimal bioremediation. This work aimed to determine the influence of pH on ammonium availability in cultures of two green microalgae, additionally screened for their growth performances on three digestates produced from different feedstocks, demonstrating the importance of tailoring a microalgal strain and digestate for bioremediation purposes. Results showed that an acidic pH of 6–6.5 resulted in a better ammonium availability in the digestate media, translated into better growth yields for both S. obliquus (GR: 0.099 ± 0.001 day−1; DW: 0.23 ± 0.02 g L−1) and C. vulgaris (GR: 0.09 ± 0.001 day−1; DW: 0.49 ± 0.012 g L−1). This result was especially true when considering larger-scale applications where ammonium loss via evaporation should be avoided. The results also demonstrated that digestates from different feedstocks resulted in different growth yields and biomass composition, especially fatty acids, for which, a digestate produced from pig manure resulted in acid contents of 6.94 ± 0.033% DW and 4.91 ± 0.3% DW in S. obliquus and C. vulgaris, respectively. Finally, this work demonstrated that the acclimation of microalgae to novel nutrient sources should be carefully considered, as it could convey significant advantages in terms of biomass composition, especially fatty acids and carbohydrate, for which, this study also demonstrated the importance of harvesting time.

Environmental sustainability of an integrate anaerobic digestion-composting treatment of food waste: Analysis of an Italian plant in the circular bioeconomy strategy

In light of the adoption of recent global policies and strategies for a more sustainable food waste management system and a greater control of environmental impacts, this study describes a circular bioeconomy plant model, currently operating in South Italy, for treatment and enhancement of organic fraction of municipal solid waste. The key basis for plant activity is dry anaerobic digestion of separately collected organic fraction of municipal solid waste (SC-OFMSW) followed by digestate composting process. Biomethane for use in the transport sector is obtained by biogas cleaning and upgrading, while high-quality compost for organic farming is produced by digestate composting. Plant activities are completed by the transformation of part of the produced waste into refuse derived fuel (RDF) to be allocated to waste-to-energy plants and the treatment of odour emissions which allows the recovery of ammonium sulphate as a fertilizer. A rooftop photovoltaic system supplies most of electric energy needed by the plant. For plant activities relative to 2020, carbon footprint was equal to -112 kg CO₂eq. for Mg of organic waste, while depletion of fossil resources was estimated at -89.6 kg oil eq. Mg^-1 of waste. Primary energy demand of food waste treatment system was -2.66 GJ Mg^-1 of input waste. Replacement of natural gas with biomethane for transport sector provided the greatest improvement contribution for all the examined categories.

Water resource recovery coupling microalgae wastewater treatment and sludge co-digestion for bio-wastes valorisation at industrial pilot-scale

This case study is part of a circular bioeconomy project for a winery company aiming to integrate a microalgae-based system within the existing facilities of the winery WWTP, promoting nutrient recovery and transformation into valuable products and bioenergy. Microalgae were used for wastewater treatment, removing N-NH₄⁺ (97%) and P-PO₄^-3 (93%). A pilot anaerobic reactor was used for batch anaerobic mono-digestion of secondary sludge (WAS) and for co-digestion of WAS and algal biomass. The methane yield using WAS from two different wine production seasons was 155.4 and 132.9 NL CH₄ kg VS^-1. Co-digestion led to the highest methane yield (225.8 NL CH₄ kg VS^-1). The application of the bio-wastes for fertilization was assessed through plant growth bioassays: mono- and co-digestion digestates and dry algal biomass enhanced plant biomass accumulation (growth indexes of 163%, 155% and 121% relative to those of the control - commercial amendment, respectively), demonstrating a lack of phytotoxicity.

Prediction of organic matter accessibility and complexity in anaerobic digestates

Further characterization to properly assess the fate of organic matter quality during anaerobic digestion and organic carbon mineralization in soils is required. Organic matter quality based on its accessibility and complexity was employed to successfully classify 28 substrate/digestate pairs through principal components and hierarchical clustering analysis. The two first components explained 58.02% of the variability and four main groups were separated according to the feedstock type. A decrease in the accessibility (16-66%) and an increase in the complexity (34-98%) of the most accessible fractions was noticed. Besides, an increase of non-biodegradable compounds (17-66%) was globally observed after anaerobic digestion. The observed trends in the conversion of organic matter during anaerobic digestion have allowed to fill the gap in the modeling of the anaerobic digestion process chain. Indeed, partial least squares regressions have accurately predicted the organic matter quality of digestates from their inputs (R² = 0.831, Q² = 0.593) although the digester operational conditions (temperature and hydraulic retention time) were non-explicative enough. As a novel approach, the predicted digestate quality was used to feed a partial least squares regression model previously developed to predict organic carbon mineralization in soil. The combined models have predicted experimental organic carbon mineralization in soil (R² = 0.697) with a model quality similar to the model for organic carbon mineralization in soil (R² = 0.894). This is the first study that has successfully conceived an additional step in the prediction of organic matter fate from raw substrate before anaerobic digestion to soil carbon mineralization.

A simple mass balance tool to predict carbon and nitrogen fluxes in anaerobic digestion systems

The increase in anaerobic digestion systems has profoundly affected the waste management of territories, particularly for agricultural systems. Changes in cultural practices and imports of organic waste modify the carbon (C) and nitrogen (N) fluxes on territories where anaerobic digestion is implemented. Successful anaerobic digestion can increase the economic and ecological efficiency of the waste management system. Conversely, poor anaerobic digestion leads to low economic and environmental efficiency due to greenhouse gas emissions and nutrient loss. Modeling the impact of anaerobic digestion on the systems integrating anaerobic digestion can improve the efficiency of these practices. The aim of this study was to develop, analyze, and evaluate a simple mass balance tool able to predict carbon and nitrogen fluxes in anaerobic digestion systems. The tool is composed of an exhaustive substrate database used by three models: (i) an anaerobic digestion model that predicts C and N contents in biogas and digestate; (ii) a phase separation model that predicts C and N content in liquid and solid phase digestates; and (iii) a storage model that predicts C and N content in raw, liquid phase, and solid phase digestates, as well as C and N emissions during storage. Sensitivity analyses were performed on the tool to determine critical inputs. Sensitivity analysis showed that outputs were highly sensitive to their respective inputs and to total inputs of solids. Performance evaluation showed that the tool can provide good quality predictions with R² correlations between observation and prediction varying from 0.72 to 0.99 with the best predictions obtained for raw digestate.

Reuse of the digestate obtained from the biomethanization of olive mill solid waste (OMSW) as soil amendment or fertilizer for the cultivation of forage grass (Lolium rigidum var. Wimmera)

The principal by-product from the two-phase olive oil production process is olive mill solid waste (OMSW). It is a highly-pollutant by-product, not only because of its characteristics, but also because of the considerable volume of OMSW which is generated, amounting to 2 to 4 million tons per year in Spain. The anaerobic digestion of this by-product is a well-studied process, and results in the generation of biogas, methane and carbon dioxide mainly of high calorific values (20-25 MJ m^-3), and an effluent or digestate. The digestate of this by-product has never been characterized. This study presents an informative view on how the composition of OMSW digestate shows promising implications as a soil amendment or fertilizer due to the quality of the biomass from Lolium rigidum, a useful grass specie for the production of forage. Three OMSW digestate alternative applications or treatments were investigated: the digestate and the solid fraction of the digestate for a nutrient-poor soil amendment and the liquid fraction of the digestate as fertilizer. The results confirm that all the OMSW digestate treatments studied presented suitable characteristics for agricultural use, and showed an optimal Carbon/Nitrogen ratio with adequate values for heavy metals which are below the limits established by the Spanish and European legislation in the absence of pathogens. However, fertirrigation was the treatment that provided Lolium rigidum with the best characteristics, improving its shoot biomass, photosynthetic rate and nutritional content.

The Use of Flat Ceramic Membranes for Purification of the Liquid Fraction of the Digestate from Municipal Waste Biogas Plants

Due to the rising water deficit in agriculture, digestate is increasingly being considered not only as an alternative fertiliser but also as a potential source of water. The use of recycled water for crop irrigation requires that it be treated in such a way that contaminants from the fermented biomass are not returned to the environment. Membrane processes can provide promising results in this regard. This study seeks to achieve membrane filtration using flat ceramic membranes for effective digestate liquid fraction treatment from a municipal waste biogas plant. Membranes of 1, 5, 15, and 50 kDa, and 0.14 and 0.45 µm are examined. The results obtained show that the application of a sedimentation process, as a preliminary step in the purification of the digestate, allows for a significant reduction in the content of contaminants in the solution. By analysing the effectiveness of the liquid fraction of the digestate purification in the sedimentation-membrane filtration process using flat ceramic membranes, it can be stated that all the membranes tested can be applied in the digestate purification. With an increase in the cut-off value, a deterioration in the quality of the digestate can be observed. The use of the sedimentation process before the membrane process not only improves the final quality of the digestate but also reduces the intensity of membrane fouling.

Digestate mechanical separation in industrial conditions: Efficiency profiles and fertilising potential

The growing number of biogas plants has resulted in problems with the digestate management. In the studies carried out in industrial conditions in the biogas plant fed with sugar beet pulp, the influence of the decanter centrifuge operating parameters such as the retention time and differential speed on the effectiveness of digestate mechanical separation was evaluated. During the studies, the impact of the addition of cationic polyacrylamide flocculants with different charge density on the liquid and solid fraction composition was also determined. It was shown that the dry matter and organic matter concentrations in the solid fraction were about 88.80 g/kg FM and 66.20% DM, respectively and in the liquid fraction 25.50 g/kg FM and 77.00% DM after the centrifugation of the digestate without flocculant at an optimal retention time of 225 s and differential speed of 4 rpm. The removal efficiency of dry matter and organic matter was 32.00% and 39.39%. The best separation results were obtained centrifuging the digestate with addition of 20 g/kg DM flocculant with a charge density of 80%. The flocculant addition increased the removal efficiency of dry matter and organic matter in comparison to centrifugation without flocculant by 49.60% and 46.86%, respectively. After centrifugation and flocculation, about 60.83% of nitrogen, 74.55% of potassium and 33.23% of phosphorus remained in the liquid fraction. The liquid fraction contained lower concentrations of nickel, lead, cadmium and chromium in comparison to solid fraction.

The valorization of the anaerobic digestate from the organic fractions of municipal solid waste: Challenges and perspectives

The anaerobic digestion is a well-established process for the treatment of organic solid waste, pursuing its conversion into a methane rich gas destined to energy generation. Research has largely dealt with the enhancement of the overall bioconversion yields, providing several strategies to maximize the production of bio-methane from the anaerobic processing of a wide variety of substrates. Nevertheless, the valorization of the process effluents should be pursued as well, especially if the anaerobic digestion is regarded in the light of the circular economy principles. Aim of this work is in identifying the state of the art of the strategies to manage the digestate from the anaerobic processing of the organic fractions of municipal solid waste. Conventional approaches are described and novel solutions are figured out in order to highlight their potential scale up as well as to address future research perspectives.

Correlations between the Composition of Liquid Fraction of Full-Scale Digestates and Process Conditions

Fast development of centralized agricultural biogas plants leads to high amounts of digestate production. The treatment and disposal of liquid fractions after on-site digestate solid–liquid separation remains problematic due to their high organic, nutrient and aromatic contents. This work aims to study the variability of the remaining compounds in the digestate liquid fractions in relation to substrate origin, process parameters and solid–liquid separation techniques. Twenty-nine digestates from full-scale codigestion biogas plants and one waste activated sludge (WAS) digestate were collected and characterized. This study highlighted the combined effect of the solid–liquid separation process and the anaerobic digestion feedstock on the characteristics of liquid fractions of digestates. Two major clusters were found: (1) liquid fractions from high efficiency separation process equipment (e.g., centrifuge and others with addition of coagulant, flocculent or polymer) and (2) liquid fractions from low efficiency separation processes (e.g., screw press, vibrating screen and rotary drum), in this latter case, the concentration of chemical oxygen demand (COD) was associated with the proportion of cow manure and energy crops at biogas plant input. Finally, SUVA254, an indicator for aromatic molecule content and the stabilization of organic matter, was associated with the hydraulic retention time (HRT).

Psychrophilic Full Scale Tubular Digester Operating over Eight Years: Complete Performance Evaluation and Microbiological Population

Most biogas plants in the world run under psychrophilic conditions and are operated by small and medium farmers. There is a gap of knowledge on the performance of these systems after several years of operation. The aim of this research is to provide a complete evaluation of a psychrophilic, low-cost, tubular digester operated for eight years. The thermal performance was monitored for 50 days, and parameters such as pH, total volatile fatty acid (tVFA), chemical oxygen demand (COD) and volatile solids (VS) were measured every week for the influent and effluent. The digester operated at a stabilized slurry temperature of around 17.7 °C, with a mean organic load rate (OLR) equal to 0.52 kg VS/m3digester *d and an estimated hydraulic retention time (HRT) of 25 days. The VS reduction in the digester was around 77.58% and the COD reduction was 67 ± 3%, with a mean value for the effluent of 3.31 ± 1.20 g COD/Lt, while the tVFA decreased by 83.6 ± 15.5% and the presence of coliforms decreased 10.5%. A BioMethane potential test (BMP) for the influent and effluent showed that the digester reached a specific methane production of 0.40 Nm3CH4/kg VS and a 0.21 Nm3CH4/m3digester d with 63.1% CH4 in the biogas. These results, together with a microbiological analysis, show stabilized anaerobic digestion and a biogas production that was higher than expected for the psychrophilic range and the short HRT; this may have been due to the presence of an anaerobic digestion microorganism consortium which was extremely well-adapted to psychrophilic conditions over the eight-year study period.

The impact of biogas digestate typology on nutrient recovery for plant growth: Accessibility indicators for first fertilization prediction

In recent years, anaerobic digestion of organic waste (OW) is rapidly appearing as a winning waste management strategy by producing energy and anaerobic digestates that can be used as fertilizers in agricultural soils. In this context, the management of the OW treatment process to maximize agro-system sustainability satisfying the crop nutrient demands represents the main goal. To investigate these traits, two protocols to assess the plant availability of digestate nitrogen (N) and phosphorus (P) were evaluated. With this aim, the N and P availability was determined on 8 digestates and 2 types of digestate-based compost from different OW via sequential chemical extractions (SCE). In addition, the digestates were tested in soil incubations and in plant pot tests with Italian ryegrass and compared with chemical fertilizer and a non-amended control soil. The N extracted from digestates via SCE was related to soil N mineralization and plant N recovery. The C: N ratio had negative impact on mineralized N and its recovery in shoots (Shoots_N = -0.0085.(C/N)+0.172, r² = 0.67), whereas water extractable mineral N was positevely related to the root N apparent recovery fraction (N-ARF) with (Roots_N = 5E^-5.N_solublemin+0.0138, r² = 0.53). The shoot P-ARF was positively correlated with the inorganic water extractable fraction of P (Shoots_P =0.1153.H₂O-P_i-0.2777.H₂O-P_o+0.0249, r² = 0.71) whereas the root P-ARF was positively correlated with the less accessible fractions (Roots_P = (b)   0.0955.NaHCO₃-P_o+0.0955.NaOH-P_o-0.0584NaHCO₃-P_i+0.0128, r² = 0.8641). Feedstock digestate typology impacted the N and P recovery results leading to a better description of the typology properties and a first nutrients ARF prediction.

Evaluation of MSW Compost and Digestate Mixtures for a Circular Economy Application

In order to obtain a product with agronomic characteristics and biological stability consistent with the EU fertilizer decree for the market of EU fertilising products three different mixtures obtained from sludge digestate from municipal wastewater treatment plant, fresh compost and mature compost have been studied and characterized. For the experimental activity, the raw samples and three mixing ones were collected for the analytical characterization. The biological stability was then assessed for all samples using different stability criteria such as Specific Oxygen Uptake Rate, Rottegrad self-heating factor, Residual biogas potential. Specific enzymatic tests provided information about the status of nutrient cycles (C, P and S) and to overall microbial activity. Physical (bulk density, particle density, air capacity and water content), nutritional (C, N, P, K, Mg, and Ca) and toxicological properties (seedling growth tests on Lepidum sativum L., Cucumis sativus L., Lolium perenne L.) were also evaluated in order to assess the feasibility of agronomic use of the digestate-based mixtures. All the digestate-based mixtures responded to the main characteristics of compost quality requirements proposed in national and international regulations. The evidence found in this study highlighted that the strategy of mixing of sludge digestates with the composts allowed to mitigate the environmental risk posed by each starting material and to valorize their nutrient content.

Humic-like substances extracted from different digestates: First trials of lettuce biostimulation in hydroponic culture

Digestate valorization is a key challenge for the feasibility of Anaerobic Digestion plants. In this study, humic-like substances (HLS) extracted from two digestates (sewage sludge and manure) were used for the biostimulation of hydroponic cultures of Lactuca sativa (lettuce) at different doses and compared to a commercial reference of leonardite HLS. Aerial biomass increase averages ranged from 7 to 30 %, but the results presented a high coefficient of variation (around 20 %). The commercial reference did not present statistically significant biomass yield improvement. The application of manure digestate extract at the higher fulvic-like acids dose (4.6 mg/L of dissolved organic carbon) presented the best and most significant results compared to the blank (Hoagland's solution only). However, this result cannot be strictly dissociated from the supplementary amounts of nutrients brought by the extracts. Additionally, all the products presented low heavy metal content compared to the recent EU regulation for biostimulants (2019/1009). This preliminary study confirmed the interest of extracting HLS from two digestates for application as biostimulants, shedding light on a new perspective for digestate valorization.

Legal requirements for digestate as fertilizer in Austria and the European Union compared to actual technical parameters

Biogas is mainly discussed in the context of renewable energy, digestate is playing a minor role. However, in the upcoming EU Fertilizer Product Regulation digestate as eligible component material is in line with the circular economy action plan. This article discusses the quality of raw digestate based on analysis data from Austrian biogas plants regarding to the current Austrian as well as the European fertilizer regulatory framework. Therefore, a survey among Austrian biogas plant operators for results of digestate analysis and substrate input and energy output is used. The results show, that the legislative framework applies to a minimum of 1.5 million tonnes of digestate. Austrian digestate is of high quality with regards to the nutrient content, required limit values for heavy metals and is also safe with respect to their hygienic parameters. The following European fertilizer product function categories are available for international trade of digestate: "organic soil improver", "growing medium", and "organic, non-microbial plant biostimulant". Establishing legal criteria determining End-of-Waste and subsequently the product status for digestate is another important step in the European circular economy.

Comparing the agrochemical properties of compost and vermicomposts produced from municipal sewage sludge digestate

The aim of this work was to investigate whether the agronomic traits of vermicompost prepared from partially stabilised sewage sludge digestate after thermophilic composting were more favourable than those of conventional compost. The effects of various additives (green waste, spent mushroom compost, wheat straw, biochar) were also tested after 1.5 months precomposting followed by 3 months vermicomposting with Eisenia fetida or by compost maturing. Vermicomposting did not result in significantly more intensive mineralisation than composting; the average organic carbon contents were 21.2 and 22.2% in vermicomposts and composts, respectively. Hence, the average total (N: 2.4%; P: 1.9%; K: 0.9%) and available (N: 160 mg/kg; P: 161 mg/kg; K: 0.8%) macronutrient concentrations were the same in both treatments. The processing method did not influence the organic matter quality (E₄/E₆) either. However, on average the concentration of the plant growth regulator kinetin was more than twice as high in vermicomposts.

Digestate mechanical separation: Efficiency profiles based on anaerobic digestion feedstock and equipment choice

Digestate mechanical separation is present in numerous anaerobic digestion plants. In this study, data from literature and from unpublished analysis were gathered to evaluate digestate separation efficiency for different mechanical separators. For the first time, efficiency indicators allowed the definition of two mass distribution profiles. The low-performance profile was characterized by each component being mainly destined to the liquid fraction, excluding P, Mg and Ca in a few cases. Screw presses represented 68% of these separators and 78% of digestates came from mainly fibrous inputs such as cow manure and silage. In the high-performance profile, digestate compounds were effectively concentrated in the solid fraction, except nitrogen. The great majority of separators were decanting centrifuges, and the anaerobic digestion inputs were principally non-fibrous such as pig slurry, sludge and agro-industrial waste. This study represents a source for benchmarking digestate separation and opens a possibility to forecast more realistically digestate separation performance.