1
|
Han Z, Nina MRH, Zhang X, Huang H, Fan D, Bai Y. Discovery and characterization of two novel polyethylene terephthalate hydrolases: One from a bacterium identified in human feces and one from the Streptomyces genus. JOURNAL OF HAZARDOUS MATERIALS 2024; 472:134532. [PMID: 38749251 DOI: 10.1016/j.jhazmat.2024.134532] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/24/2023] [Revised: 05/01/2024] [Accepted: 05/02/2024] [Indexed: 05/30/2024]
Abstract
Polyethylene terephthalate (PET) is widely used for various industrial applications. However, owing to its extremely slow breakdown rate, PET accumulates as plastic trash, which negatively affects the environment and human health. Here, we report two novel PET hydrolases: PpPETase from Pseudomonas paralcaligenes MRCP1333, identified in human feces, and ScPETase from Streptomyces calvus DSM 41452. These two enzymes can decompose various PET materials, including semicrystalline PET powders (Cry-PET) and low-crystallinity PET films (gf-PET). By structure-guided engineering, two variants, PpPETaseY239R/F244G/Y250G and ScPETaseA212C/T249C/N195H/N243K were obtained that decompose Cry-PET 3.1- and 1.9-fold faster than their wild-type enzymes, respectively. The co-expression of ScPETase and mono-(2-hydroxyethyl) terephthalate hydrolase from Ideonella sakaiensis (IsMHETase) resulted in 1.4-fold more degradation than the single enzyme system. This engineered strain degraded Cry-PET and gf-PET by more than 40% and 6%, respectively, after 30 d. The concentrations of terephthalic acid (TPA) in the Cry-PET and gf-PET degradation products were 37.7% and 25.6%, respectively. The discovery of these two novel PET hydrolases provides opportunities to create more powerful biocatalysts for PET biodegradation.
Collapse
Affiliation(s)
- Zhengyang Han
- State Key Laboratory of Bioreactor Engineering, Shanghai Collaborative Innovation Center for Biomanufacturing, East China University of Science and Technology, Shanghai 200237, China
| | - Mario Roque Huanca Nina
- State Key Laboratory of Bioreactor Engineering, Shanghai Collaborative Innovation Center for Biomanufacturing, East China University of Science and Technology, Shanghai 200237, China
| | - Xiaoyan Zhang
- State Key Laboratory of Bioreactor Engineering, Shanghai Collaborative Innovation Center for Biomanufacturing, East China University of Science and Technology, Shanghai 200237, China
| | - Hanyao Huang
- State Key Laboratory of Bioreactor Engineering, Shanghai Collaborative Innovation Center for Biomanufacturing, East China University of Science and Technology, Shanghai 200237, China
| | - Daidi Fan
- Shaanxi R&D Centre of Biomaterials and Fermentation Engineering, School of Chemical Engineering, Northwest University, Xi'an, Shaanxi 710069, China
| | - Yunpeng Bai
- State Key Laboratory of Bioreactor Engineering, Shanghai Collaborative Innovation Center for Biomanufacturing, East China University of Science and Technology, Shanghai 200237, China.
| |
Collapse
|
2
|
Zeng L, Yuan C, Xiang T, Guan X, Dai L, Xu D, Yang D, Li L, Tian C. Research on the Migration and Adsorption Mechanism Applied to Microplastics in Porous Media: A Review. NANOMATERIALS (BASEL, SWITZERLAND) 2024; 14:1060. [PMID: 38921936 PMCID: PMC11206983 DOI: 10.3390/nano14121060] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/19/2024] [Revised: 06/06/2024] [Accepted: 06/11/2024] [Indexed: 06/27/2024]
Abstract
In recent years, microplastics (MPs) have emerged as a significant environmental pollutant, garnering substantial attention for their migration and transformation behaviors in natural environments. MPs frequently infiltrate natural porous media such as soil, sediment, and rock through various pathways, posing potential threats to ecological systems and human health. Consequently, the migration and adsorption mechanisms applied to MPs in porous media have been extensively studied. This paper aims to elucidate the migration mechanisms of MPs in porous media and their influencing factors through a systematic review. The review encompasses the characteristics of MPs, the physical properties of porous media, and hydrodynamic factors. Additionally, the paper further clarifies the adsorption mechanisms of MPs in porous media to provide theoretical support for understanding their environmental behavior and fate. Furthermore, the current mainstream detection techniques for MPs are reviewed, with an analysis of the advantages, disadvantages, and applications of each technique. Finally, the paper identifies the limitations and shortcomings of current research and envisions future research directions.
Collapse
Affiliation(s)
- Lin Zeng
- School of Resources and Environment Engineering, East China University of Science and Technology, Shanghai 200237, China; (L.Z.); (C.Y.); (C.T.)
- College of Chemistry and Chemical Engineering, Chongqing University of Technology, Chongqing 400054, China; (D.X.); (L.L.)
| | - Cong Yuan
- School of Resources and Environment Engineering, East China University of Science and Technology, Shanghai 200237, China; (L.Z.); (C.Y.); (C.T.)
| | - Taoyu Xiang
- College of New Students, Tongji University, Shanghai 200092, China;
| | - Xiangwei Guan
- China Kunlun Contracting and Engineering Corporation (CKCEC), Beijing 100044, China;
| | - Li Dai
- College of Chemistry and Chemical Engineering, Chongqing University of Technology, Chongqing 400054, China; (D.X.); (L.L.)
| | - Dingliang Xu
- College of Chemistry and Chemical Engineering, Chongqing University of Technology, Chongqing 400054, China; (D.X.); (L.L.)
| | - Danhui Yang
- School of Resources and Environment Engineering, East China University of Science and Technology, Shanghai 200237, China; (L.Z.); (C.Y.); (C.T.)
| | - Long Li
- College of Chemistry and Chemical Engineering, Chongqing University of Technology, Chongqing 400054, China; (D.X.); (L.L.)
| | - Chengcheng Tian
- School of Resources and Environment Engineering, East China University of Science and Technology, Shanghai 200237, China; (L.Z.); (C.Y.); (C.T.)
| |
Collapse
|
3
|
Xiao N, Wang Y, Guo Z, Shao T, Dong Z, Xing B. Tire plastic and road-wear particles on Yujing Expressway in the restoration area of Mu Us Sandy Land: Occurrence characteristics and ecological risk screening. JOURNAL OF HAZARDOUS MATERIALS 2024; 468:133860. [PMID: 38402682 DOI: 10.1016/j.jhazmat.2024.133860] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/08/2023] [Revised: 02/20/2024] [Accepted: 02/20/2024] [Indexed: 02/27/2024]
Abstract
Tire plastic and road-wear particles (TPR-WP) are a current research priority as one of the main environmental sources of microplastics. We selected a unique land use type - desert restoration area, collected soil and dust samples from the Yujing Expressway and its service areas, and analyzed TPR-WP abundance, type, size and morphology by laser direct infrared (LDIR). The abundance of TPR-WP in expressway dust (14,446.87 ± 10,234.24 n/kg) was higher than that in soil (7500 ± 3253.64 n/kg). Random forest model showed that the source of TPR-WP was highly correlated with economic factors and natural climate. Overall, the proportion of small and medium-sized TPR-WP in dust was higher than soil, more than half of the TPR-WP in dust were in 20 - 50 µm range. The proportion of small particle size TPR-WP increased with the rise of elevation. The pollution load index suggested that the survey region was generally at level I risk zone, while the ecological risk index indicated that the pollution level of expressway was III and IV, and the service area was IV. In general, the study was of great significance for clarifying the distribution and risk of TPR-WP in soil and dust of expressways and service areas.
Collapse
Affiliation(s)
- Na Xiao
- School of Geography and Tourism, Shaanxi Normal University, Xi'an 710119, China
| | - Yanhua Wang
- School of Geography and Tourism, Shaanxi Normal University, Xi'an 710119, China.
| | - Ziyi Guo
- School of Geography and Tourism, Shaanxi Normal University, Xi'an 710119, China
| | - Tianjie Shao
- School of Geography and Tourism, Shaanxi Normal University, Xi'an 710119, China
| | - Zhibao Dong
- School of Geography and Tourism, Shaanxi Normal University, Xi'an 710119, China
| | - Baoshan Xing
- Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA 01003, United States
| |
Collapse
|
4
|
Zhang X, He X, Pan D, Shi L, Wu Y, Yang Y, Zhu Y, Wang Y, Wang H, Pu L, He S, Meng L, Li J. Effects of thermal exposure to disposable plastic tableware on human gut microbiota and metabolites: A quasi-experimental study. JOURNAL OF HAZARDOUS MATERIALS 2024; 462:132800. [PMID: 37866144 DOI: 10.1016/j.jhazmat.2023.132800] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/28/2023] [Revised: 10/16/2023] [Accepted: 10/17/2023] [Indexed: 10/24/2023]
Abstract
The aim of this quasi-experimental study was to determine the alterations in gut microbiota and metabolism in humans who consume hot food served in disposable plastic tableware (DPT). Participants in the exposure and control groups were provided three hot meals in DPT (n = 30) or non-DPT (n = 30), respectively. After a month of observation, individuals in the exposure group discontinued the three meals provided in DPT (n = 27) for 1 month as the post-exposure group. Fecal samples were collected and tested for microplastics (MPs) detection using LDIR and gut microbiota identification based on the 16 S rRNA. Urine samples were used for metabolite analysis using LC-MS/MS. Results showed that the level of MPs in feces was lower in the post-exposure group compared with the exposure group. Furthermore, the abundance of the phyla Actinobacteria, Proteobacteria, Firmicutes, and Bacteroidota in the exposure and post-exposure groups were significantly different compared with the control group. Changes in microbiota abundance and metabolite levels were mainly associated with central nervous system effects, energy metabolism, and inflammation, suggesting that thermal exposure to DPT for 1 month has considerable health effects.
Collapse
Affiliation(s)
- Xue Zhang
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China
| | - Xiaoxue He
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China
| | - Degong Pan
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China
| | - Liping Shi
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China
| | - Yueping Wu
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China
| | - Yue Yang
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China
| | - Yongbin Zhu
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China
| | - Yanrong Wang
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China
| | - Huihui Wang
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China
| | - Lining Pu
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China
| | - Shulan He
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China.
| | - Lingchen Meng
- Department of Sanitary Chemistry, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China.
| | - Jiangping Li
- Department of Epidemiology and Health Statistics, School of Public Health, Ningxia Medical University, Yinchuan, Ningxia 750004, China; Key Laboratory of Environmental Factors and Chronic Disease Control, Ningxia Medical University, Yinchuan, Ningxia 750004, China.
| |
Collapse
|
5
|
Lv S, Li Y, Zhao S, Shao Z. Biodegradation of Typical Plastics: From Microbial Diversity to Metabolic Mechanisms. Int J Mol Sci 2024; 25:593. [PMID: 38203764 PMCID: PMC10778777 DOI: 10.3390/ijms25010593] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/30/2023] [Revised: 12/22/2023] [Accepted: 12/27/2023] [Indexed: 01/12/2024] Open
Abstract
Plastic production has increased dramatically, leading to accumulated plastic waste in the ocean. Marine plastics can be broken down into microplastics (<5 mm) by sunlight, machinery, and pressure. The accumulation of microplastics in organisms and the release of plastic additives can adversely affect the health of marine organisms. Biodegradation is one way to address plastic pollution in an environmentally friendly manner. Marine microorganisms can be more adapted to fluctuating environmental conditions such as salinity, temperature, pH, and pressure compared with terrestrial microorganisms, providing new opportunities to address plastic pollution. Pseudomonadota (Proteobacteria), Bacteroidota (Bacteroidetes), Bacillota (Firmicutes), and Cyanobacteria were frequently found on plastic biofilms and may degrade plastics. Currently, diverse plastic-degrading bacteria are being isolated from marine environments such as offshore and deep oceanic waters, especially Pseudomonas spp. Bacillus spp. Alcanivoras spp. and Actinomycetes. Some marine fungi and algae have also been revealed as plastic degraders. In this review, we focused on the advances in plastic biodegradation by marine microorganisms and their enzymes (esterase, cutinase, laccase, etc.) involved in the process of biodegradation of polyethylene terephthalate (PET), polystyrene (PS), polyethylene (PE), polyvinyl chloride (PVC), and polypropylene (PP) and highlighted the need to study plastic biodegradation in the deep sea.
Collapse
Affiliation(s)
- Shiwei Lv
- Key Laboratory of Marine Genetic Resources, Third Institute of Oceanography, Ministry of Natural Resources of China, Xiamen 361005, China; (S.L.); (Y.L.); (S.Z.)
- School of Environmental Science, Harbin Institute of Technology, Harbin 150090, China
| | - Yufei Li
- Key Laboratory of Marine Genetic Resources, Third Institute of Oceanography, Ministry of Natural Resources of China, Xiamen 361005, China; (S.L.); (Y.L.); (S.Z.)
- School of Marine Sciences, China University of Geosciences, Beijing 100083, China
| | - Sufang Zhao
- Key Laboratory of Marine Genetic Resources, Third Institute of Oceanography, Ministry of Natural Resources of China, Xiamen 361005, China; (S.L.); (Y.L.); (S.Z.)
| | - Zongze Shao
- Key Laboratory of Marine Genetic Resources, Third Institute of Oceanography, Ministry of Natural Resources of China, Xiamen 361005, China; (S.L.); (Y.L.); (S.Z.)
- School of Environmental Science, Harbin Institute of Technology, Harbin 150090, China
- School of Marine Sciences, China University of Geosciences, Beijing 100083, China
- Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai), Zhuhai 519000, China
| |
Collapse
|
6
|
Xu X, Li J, Dymerska A, Koh JJ, Min J, Liu S, Azadmanjiri J, Mijowska E. MIL-53(Al) assisted in upcycling plastic bottle waste into nitrogen-doped hierarchical porous carbon for high-performance supercapacitors. CHEMOSPHERE 2023; 340:139865. [PMID: 37598943 DOI: 10.1016/j.chemosphere.2023.139865] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/11/2023] [Revised: 08/04/2023] [Accepted: 08/17/2023] [Indexed: 08/22/2023]
Abstract
Disposable aluminum cans and plastic bottles are common wastes found in modern societies. This article shows that they can be upcycled into functional materials, such as metal-organic frameworks and hierarchical porous carbon nanomaterials for high-value applications. Through a solvothermal method, used poly(ethylene terephthalate) bottles and aluminum cans are converted into MIL-53(Al). Subsequently, the as-prepared MIL-53(Al) can be further carbonized into a nitrogen-doped (4.52 at%) hierarchical porous carbon framework. With an optical amount of urea present during the carbonization process, the carbon nanomaterial of a high specific surface area of 1324 m2 g-1 with well-defined porosity can be achieved. These features allow the nitrogen-doped hierarchical porous carbon to perform impressively as the working electrode of supercapacitors, delivering a high specific capacitance of 355 F g-1 at 0.5 A g-1 in a three-electrode cell and exhibiting a high energy density of 20.1 Wh kg-1 at a power density of 225 W kg-1, while simultaneously maintaining 88.2% capacitance retention over 10,000 cycles in two-electrode system. This work demonstrates the possibility of upcycling wastes to obtain carbon-based high-performance supercapacitors.
Collapse
Affiliation(s)
- Xiaodong Xu
- Department of Nanomaterials Physicochemistry, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, al. Piastów 45, 70-311, Szczecin, Poland; Chongqing Shuoyingfeng New Energy Technology Co, No. 5 Gangqiao Branch Road, Jiangbei District, Chongqing, 400026, China.
| | - Jiaxin Li
- Department of Nanomaterials Physicochemistry, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, al. Piastów 45, 70-311, Szczecin, Poland
| | - Anna Dymerska
- Department of Nanomaterials Physicochemistry, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, al. Piastów 45, 70-311, Szczecin, Poland
| | - J Justin Koh
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore, 138634, Singapore
| | - Jiakang Min
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore, 138634, Singapore; United Microelectronics Center (CUMEC), No. 20 Xiyuan South Street, Shapingba District, Chongqing, 401332, China; Department of Materials Science & Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore, 117576, Singapore.
| | - Siqi Liu
- Department of Materials Science & Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore, 117576, Singapore
| | - Jalal Azadmanjiri
- Department of Inorganic Chemistry, University of Chemistry and Technology Prague, Technická 5, 166 28, Prague 6, Czech Republic
| | - Ewa Mijowska
- Department of Nanomaterials Physicochemistry, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, al. Piastów 45, 70-311, Szczecin, Poland
| |
Collapse
|
7
|
Yan M, Yang Y, Chen F, Hantoko D, Pariatamby A, Kanchanatip E. Development of reusable Ni/γ-Al 2O 3 catalyst for catalytic hydrolysis of waste PET bottles into terephthalic acid. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:102560-102573. [PMID: 37668784 DOI: 10.1007/s11356-023-29596-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/03/2023] [Accepted: 08/26/2023] [Indexed: 09/06/2023]
Abstract
In order to efficiently recycle waste polyethylene terephthalate (PET) bottles, this study aimed to enhance the hydrolysis process to convert PET bottle into valuable terephthalic acid (TPA) by developing effective and reusable Ni/γ-Al2O3 catalysts. A series of Ni/γ-Al2O3 catalyst was prepared by the impregnation method with different Ni loadings (5-15 wt%) and was characterized by various techniques including XRD, SEM-EDX, and N2 adsorption-desorption. The prepared catalysts were employed in the catalytic hydrolysis of PET under varied influencing factors, namely reaction temperature (220-280 °C), reaction time (20-60 min), and Ni loading. The response surface methodology (RSM) was used to optimize the operating condition to produce the maximum TPA yield, and the optimal values were determined as follows: reaction temperature = 267.07 °C, reaction time = 48.54 min, and Ni loading = 12.90 wt%, giving the highest TPA yield of 97.06%. The R2, F-value, and P-value of the analysis of variance (ANOVA) were 0.9982, 424.96, and <0.0001, respectively, indicating a good fit of the model. The results from XRD and FTIR measurement of the produced TPA indicated the high purity and comparable chemical structures to the TPA standard. In addition, the 12.9Ni/Al catalyst exhibited high catalytic activity in repeated cycles of hydrolysis process of PET and could be regenerated by calcination to restore its catalytic activity. This finding could be a promising alternative for an effective TPA recovery from waste plastic bottles.
Collapse
Affiliation(s)
- Mi Yan
- Institute of Energy and Power Engineering, Zhejiang University of Technology, Hangzhou, 310014, China
- Zhejiang Carbon Neutral Innovation Institute, Zhejiang University of Technology, Hangzhou, 310014, China
| | - Yayong Yang
- Institute of Energy and Power Engineering, Zhejiang University of Technology, Hangzhou, 310014, China
| | - Feng Chen
- Institute of Energy and Power Engineering, Zhejiang University of Technology, Hangzhou, 310014, China
| | - Dwi Hantoko
- Interdisciplinary Research Center for Refining & Advanced Chemicals, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia
| | - Agamuthu Pariatamby
- Jeffrey Sachs Center on Sustainable Development, Sunway University, Bandar Sunway, 47500, Petaling Jaya, Malaysia
| | - Ekkachai Kanchanatip
- Department of Civil and Environmental Engineering, Faculty of Science and Engineering, Kasetsart University Chalermphrakiat Sakon Nakhon Province Campus, Sakon Nakhon, 47000, Thailand.
- Center of Excellence in Environmental Catalysis and Adsorption, Faculty of Engineering, Thammasat University, Pathum Thani, 12120, Thailand.
| |
Collapse
|
8
|
Liang H, Dong H, Zhang C, Geng Y, Liu X, Liu G, Zhong C. Combining LCA-MFA models to identify China's plastic value chain environmental impact mitigation pathways. iScience 2023; 26:107701. [PMID: 37694146 PMCID: PMC10483054 DOI: 10.1016/j.isci.2023.107701] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/21/2022] [Revised: 07/31/2023] [Accepted: 08/17/2023] [Indexed: 09/12/2023] Open
Abstract
Characterizing material flows and environmental impacts of plastic value chain is crucial for sustainable plastic management. Here, we combine material flow analysis and life cycle assessment methods to map the flows of eight major plastics and investigate the multiple environmental impacts of China's plastic value chain. We find that packaging and textile sectors dominate plastic consumption and are responsible for the value chain environmental burdens, but with low recycling rates. Major environmental impacts are generated in plastic production and product manufacturing stages because of the consumption of coal-based feedstocks and electricity. We therefore set up six scenarios by considering carbon neutrality energy pathway, plastic recycling improvement, and technology updating, finding that the value chain environmental impact can be reduced by 14%-57% in 2060 under combined scenario. Particularly, carbon neutrality renewable energy pathway plays an important role. These findings provide valuable insights to identify key mitigation pathways for plastic value chain.
Collapse
Affiliation(s)
- Hongda Liang
- School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Huijuan Dong
- School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
- Shanghai Engineering Research Center of Solid Waste Treatment and Resource Recovery, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Chenyi Zhang
- School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Yong Geng
- School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
- Shanghai Engineering Research Center of Solid Waste Treatment and Resource Recovery, Shanghai Jiao Tong University, Shanghai 200240, China
- School of International and Public Affairs, Shanghai Jiao Tong University, Shanghai 200030, China
| | - Xiao Liu
- China Institute for Urban Governance, Shanghai Jiao Tong University, Shanghai 200030, China
| | - Gang Liu
- College of Urban and Environmental Sciences, Peking University, Beijing 100871, China
| | - Chen Zhong
- School of International and Public Affairs, Shanghai Jiao Tong University, Shanghai 200030, China
| |
Collapse
|
9
|
Chen Z, Zheng R, Bao T, Ma T, Wei W, Shen Y, Ni BJ. Dual-Doped Nickel Sulfide for Electro-Upgrading Polyethylene Terephthalate into Valuable Chemicals and Hydrogen Fuel. NANO-MICRO LETTERS 2023; 15:210. [PMID: 37695408 PMCID: PMC10495299 DOI: 10.1007/s40820-023-01181-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/05/2023] [Accepted: 08/10/2023] [Indexed: 09/12/2023]
Abstract
Electro-upcycling of plastic waste into value-added chemicals/fuels is an attractive and sustainable way for plastic waste management. Recently, electrocatalytically converting polyethylene terephthalate (PET) into formate and hydrogen has aroused great interest, while developing low-cost catalysts with high efficiency and selectivity for the central ethylene glycol (PET monomer) oxidation reaction (EGOR) remains a challenge. Herein, a high-performance nickel sulfide catalyst for plastic waste electro-upcycling is designed by a cobalt and chloride co-doping strategy. Benefiting from the interconnected ultrathin nanosheet architecture, dual dopants induced up-shifting d band centre and facilitated in situ structural reconstruction, the Co and Cl co-doped Ni3S2 (Co, Cl-NiS) outperforms the single-doped and undoped analogues for EGOR. The self-evolved sulfide@oxyhydroxide heterostructure catalyzes EG-to-formate conversion with high Faradic efficiency (> 92%) and selectivity (> 91%) at high current densities (> 400 mA cm-2). Besides producing formate, the bifunctional Co, Cl-NiS-assisted PET hydrolysate electrolyzer can achieve a high hydrogen production rate of 50.26 mmol h-1 in 2 M KOH, at 1.7 V. This study not only demonstrates a dual-doping strategy to engineer cost-effective bifunctional catalysts for electrochemical conversion processes, but also provides a green and sustainable way for plastic waste upcycling and simultaneous energy-saving hydrogen production.
Collapse
Affiliation(s)
- Zhijie Chen
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW, 2007, Australia
| | - Renji Zheng
- School of Minerals Processing and Bioengineering, Central South University, Changsha, 410083, People's Republic of China.
| | - Teng Bao
- School of Biology, Food and Environment Engineering, Hefei University, Hefei, 230601, People's Republic of China
| | - Tianyi Ma
- School of Science, STEM College, RMIT University, Melbourne, VIC, 3000, Australia
| | - Wei Wei
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW, 2007, Australia
| | - Yansong Shen
- School of Chemical Engineering, University of New South Wales, Sydney, NSW, 2052, Australia
| | - Bing-Jie Ni
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW, 2007, Australia.
| |
Collapse
|
10
|
Qiu Y, Zhou S, Zhang C, Qin W, Lv C, Zou M. Identification of potentially contaminated areas of soil microplastic based on machine learning: A case study in Taihu Lake region, China. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 877:162891. [PMID: 36940748 DOI: 10.1016/j.scitotenv.2023.162891] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2023] [Revised: 03/10/2023] [Accepted: 03/12/2023] [Indexed: 05/06/2023]
Abstract
Soil microplastic (MP) pollution has recently become increasingly aggravated, with severe consequences being generated. Understanding the spatial distribution characteristics of soil MPs is an important prerequisite for protecting and controlling soil pollution. However, determining the spatial distribution of soil MPs through a large number of soil field sampling and laboratory test analyses is unrealistic. In this study, we compared the accuracy and applicability of different machine learning models for predicting the spatial distribution of soil MPs. The support vector machine regression model with radial basis function (RBF) as kernel function (SVR-RBF) has a high prediction accuracy (R2 = 0.8934). Among the six ensemble models, random forest (R2 = 0.9007) could better explain the significance of source and sink factors affecting the occurrence of soil MPs. Soil texture, population density, and MPs point of interest (MPs-POI) were the main source-sink factors affecting the occurrence of soil MPs. Furthermore, the accumulation of MPs in soil was significantly affected by human activity. The spatial distribution map of soil MP pollution in the study area was drawn based on the bivariate local Moran's I model of soil MP pollution and the normalized difference vegetation index (NDVI) variation trend. A total of 48.74 km2 of soil was in an area of serious MP pollution, mainly concentrated in urban soil. This study provides a hybrid framework that includes spatial distribution prediction of MPs, source-sink analysis, and pollution risk area identification, providing scientific and systematic methods and techniques for pollution management in other soil environments.
Collapse
Affiliation(s)
- Yifei Qiu
- School of Geography and Ocean Science, Nanjing University, Nanjing 210023, China; Key Laboratory of Coastal Zone Exploitation and Protection, Ministry of Natural Resources, Nanjing 210024, China
| | - Shenglu Zhou
- School of Geography and Ocean Science, Nanjing University, Nanjing 210023, China; Key Laboratory of Coastal Zone Exploitation and Protection, Ministry of Natural Resources, Nanjing 210024, China.
| | - Chuchu Zhang
- School of Geography and Ocean Science, Nanjing University, Nanjing 210023, China; Ministry of Education Key Laboratory for Coast and Island Development, Nanjing University, Nanjing 210093, China
| | - Wendong Qin
- School of Geography and Ocean Science, Nanjing University, Nanjing 210023, China; Key Laboratory of Coastal Zone Exploitation and Protection, Ministry of Natural Resources, Nanjing 210024, China
| | - Chengxiang Lv
- School of Geography and Ocean Science, Nanjing University, Nanjing 210023, China; Key Laboratory of Coastal Zone Exploitation and Protection, Ministry of Natural Resources, Nanjing 210024, China
| | - Mengmeng Zou
- School of Geography and Ocean Science, Nanjing University, Nanjing 210023, China; Key Laboratory of Coastal Zone Exploitation and Protection, Ministry of Natural Resources, Nanjing 210024, China
| |
Collapse
|
11
|
Qiu Y, Zhou S, Zhang C, Qin W, Lv C. A framework for systematic microplastic ecological risk assessment at a national scale. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 327:121631. [PMID: 37058862 DOI: 10.1016/j.envpol.2023.121631] [Citation(s) in RCA: 13] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/28/2023] [Revised: 03/25/2023] [Accepted: 04/11/2023] [Indexed: 06/19/2023]
Abstract
Microplastic pollution is widespread in terrestrial and aquatic environments; however, a systematic assessment of the ecological risks of microplastics is lacking. This study collected research studies on microplastics in soil, aquatic and sediment environments, and screened 128 articles including 3459 sites to assess the ecological risks posed by microplastics in China following a literature quality assessment. We developed a systematic ecological risk assessment framework for microplastics in terms of spatial characterization, biotoxicity and anthropogenic impacts. The results of the pollution load index indicated that 74% and 47% of the soil and aquatic environments studied, respectively, faced a medium or higher level of pollution. Comparing predicted no effect concentrations (PNEC) and measured environmental concentrations (MECs), revealed that soil (97.70%) and aquatic (50.77%) environmental studies were at serious ecological risk from microplastics. The results of the pressure-state-response model showed that the microplastic pollution in Pearl River Delta was in a high-risk state. In addition, we found that ultraviolet radiation and rainfall exacerbate soil microplastic pollution, and higher river runoff may carry large amounts of microplastic from the source. The framework developed in this study will help assess the ecological risks of microplastics in the region to promote the mitigation of plastic pollution.
Collapse
Affiliation(s)
- Yifei Qiu
- School of Geography and Ocean Science, Nanjing University, Nanjing, 210023, China; Key Laboratory of Coastal Zone Exploitation and Protection, Ministry of Natural Resources, Nanjing, 210024, China
| | - Shenglu Zhou
- School of Geography and Ocean Science, Nanjing University, Nanjing, 210023, China; Key Laboratory of Coastal Zone Exploitation and Protection, Ministry of Natural Resources, Nanjing, 210024, China.
| | - Chuchu Zhang
- School of Geography and Ocean Science, Nanjing University, Nanjing, 210023, China; Ministry of Education Key Laboratory for Coast and Island Development, Nanjing University, Nanjing, 210093, China
| | - Wendong Qin
- School of Geography and Ocean Science, Nanjing University, Nanjing, 210023, China; Key Laboratory of Coastal Zone Exploitation and Protection, Ministry of Natural Resources, Nanjing, 210024, China
| | - Chengxiang Lv
- School of Geography and Ocean Science, Nanjing University, Nanjing, 210023, China; Key Laboratory of Coastal Zone Exploitation and Protection, Ministry of Natural Resources, Nanjing, 210024, China
| |
Collapse
|
12
|
Wen R, Shen G, Yu Y, Xu S, Wei J, Huo Y, Jiang S. Optimization of Ti-BA efficiently for the catalytic alcoholysis of waste PET using response surface methodology. RSC Adv 2023; 13:17166-17178. [PMID: 37304773 PMCID: PMC10248717 DOI: 10.1039/d3ra01460f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2023] [Accepted: 05/21/2023] [Indexed: 06/13/2023] Open
Abstract
A titanium benzoate (Ti-BA) catalyst was prepared by hydrothermal method, which has an ordered eight-face structure, and was used for polyethylene terephthalate (PET) depolymerization. With bis(2-hydroxyethyl)terephthalate (BHET) as the target molecule and ethylene glycol (EG) as the solvent, the best reaction conditions for catalytic alcoholysis via a PET alcoholic solution were investigated via response surface experiments and found to be a EG/PET mass ratio of 3.59, temperature of 217 °C and reaction time of 3.3 h. Under these conditions, the amount of the catalyst required was only 2% of the mass of the PET, and the yield of BHET reached 90.01% and under the same conditions, the yield of BHET could still reach 80.1%. Based on the experimental results, the mechanism of alcoholysis, Ti-BA catalyst activated ethylene glycol deprotonation to achieve the progressive degradation of polymers. This experiment provides a reference for the degradation of polymer waste and other transesterification reactions.
Collapse
Affiliation(s)
- Ruiyang Wen
- School of Petrochemical Engineering, Shenyang University of Technology Liaoyang 111003 China
| | - Guoliang Shen
- School of Petrochemical Engineering, Shenyang University of Technology Liaoyang 111003 China
| | - Yang Yu
- School of Petrochemical Engineering, Shenyang University of Technology Liaoyang 111003 China
| | - Shijie Xu
- School of Petrochemical Engineering, Shenyang University of Technology Liaoyang 111003 China
| | - Jie Wei
- School of Petrochemical Engineering, Shenyang University of Technology Liaoyang 111003 China
| | - Yue Huo
- School of Petrochemical Engineering, Shenyang University of Technology Liaoyang 111003 China
| | - Sijin Jiang
- School of Petrochemical Engineering, Shenyang University of Technology Liaoyang 111003 China
| |
Collapse
|
13
|
Kováts N, Hubai K, Sainnokhoi TA, Eck-Varanka B, Hoffer A, Tóth Á, Teke G. Ecotoxicity of PM 10 emissions generated during controlled burning of waste PET. ENVIRONMENTAL TOXICOLOGY AND PHARMACOLOGY 2023; 99:104118. [PMID: 37011741 DOI: 10.1016/j.etap.2023.104118] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/22/2023] [Revised: 03/28/2023] [Accepted: 03/31/2023] [Indexed: 06/19/2023]
Abstract
Domestic waste is often burned either as fuel for winter heating or in open areas, simply to get rid of waste. Polyethylene terephthalate (PET) represents an important component of plastics usage as well as of plastic waste produced. While most studies attempt to characterize environmental risk of open burning of mixed household waste, present work evaluates chemical and ecotoxicological parameters of particulate matter (PM) produced during controlled burning of PET samples. In the PM10 samples, polycyclic aromatic hydrocarbon and heavy metal concentrations were measured, ecotoxicity was evaluated using the kinetic Vibrio fischeri bioassay. Both chemical composition and ecotoxicity of the 4 samples showed significant correlation, regardless of the colored or colorless nature of the original PET sample. Antimony was found in considerable concentrations, in the range of 6.93-16.9 mg/kg. PAHs profiles of the samples were very similar, showing the dominance of 4-and 5-ring PAHs, including carcinogenic benzo(a)pyrene.
Collapse
Affiliation(s)
- Nora Kováts
- University of Pannonia, Centre for Natural Sciences, Egyetem str. 10, 8200 Veszprém, Hungary.
| | - Katalin Hubai
- University of Pannonia, Centre for Natural Sciences, Egyetem str. 10, 8200 Veszprém, Hungary
| | - Tsend-Ayush Sainnokhoi
- University of Pannonia, Centre for Natural Sciences, Egyetem str. 10, 8200 Veszprém, Hungary; Mongolian University of Life Sciences, School of Veterinary Medicine, Khan-Uul district, Zaisan 17042, Ulaanbaatar, Mongolia
| | - Bettina Eck-Varanka
- University of Pannonia, Centre for Natural Sciences, Egyetem str. 10, 8200 Veszprém, Hungary
| | - András Hoffer
- MTA-PE Air Chemistry Research Group, Egyetem str. 10, 8200 Veszprém, Hungary
| | - Ádám Tóth
- MTA-PE Air Chemistry Research Group, Egyetem str. 10, 8200 Veszprém, Hungary
| | - Gábor Teke
- ELGOSCAR-2000 Environmental Technology and Water Management Ltd., 8184 Balatonfuzfo, Hungary
| |
Collapse
|
14
|
Chu J, Zhou Y, Cai Y, Wang X, Li C, Liu Q. Flow and stock accumulation of plastics in China: Patterns and drivers. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 852:158513. [PMID: 36075419 DOI: 10.1016/j.scitotenv.2022.158513] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/16/2022] [Revised: 07/20/2022] [Accepted: 08/31/2022] [Indexed: 06/15/2023]
Abstract
Plastic pollution has always been a hot issue of global concern. Previous studies have mainly focused on the flow of plastics. However, information on the patterns and characteristics of flow, stock, and waste in the plastic life cycle and their driving factors is limited in China, and effective waste reduction and sustainable strategies are missing. Therefore, this research established a flow model of polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET); further analyzed the driving factors; and proposed strategies for waste reduction and sustainable development. We found that the total consumption, stock, and waste of PET, PE, and PP in 2010-2017 reached 552.96, 292.70, and 257.18 Tg, respectively. Building and construction (B&C), packaging, and textiles were the sectors with the largest stock of PE, PP, and PET. From 2010 to 2013, the stock of PE increased by 440 %, which was mainly driven by the increase in material utilization intensity (MUI). Similarly, the growth of MUI was the main driving factor driving PP (351 %) and PET (367 %) stocks. Notably, from 2014 to 2017, economic growth was the main factor driving the plastic stock. These results will provide a scientific basis for promoting the sustainable utilization of PE, PP, and PET and be of great significance to achieve the strategic goal of a no-waste city.
Collapse
Affiliation(s)
- Jianwen Chu
- State Key Laboratory of Water Environment Simulation, Beijing Normal University, Beijing 100875, China
| | - Ya Zhou
- Key Laboratory for City Cluster Environmental Safety and Green Development of the Ministry of Education, School of Ecology, Environment and Resources, Guangdong University of Technology, Guangzhou 510006, China; Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou), Guangzhou 511458, China
| | - Yanpeng Cai
- Guangdong Provincial Key Laboratory of Water Quality Improvement and Ecological Restoration for Watersheds, School of Ecology, Environment and Resources, Guangdong University of Technology, Guangzhou 510006, China; Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou), Guangzhou 511458, China.
| | - Xuan Wang
- State Key Laboratory of Water Environment Simulation, Beijing Normal University, Beijing 100875, China
| | - Chunhui Li
- State Key Laboratory of Water Environment Simulation, Beijing Normal University, Beijing 100875, China
| | - Qiang Liu
- State Key Laboratory of Water Environment Simulation, Beijing Normal University, Beijing 100875, China
| |
Collapse
|
15
|
Huang J, Yan D, Zhu Q, Cheng X, Tang J, Lu X, Xin J. Depolymerization of polyethylene terephthalate with glycol under comparatively mild conditions. Polym Degrad Stab 2022. [DOI: 10.1016/j.polymdegradstab.2022.110245] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
|
16
|
Hossain MT, Shahid MA, Ali A. Development of nanofibrous membrane from recycled polyethene terephthalate bottle by electrospinning. OPENNANO 2022. [DOI: 10.1016/j.onano.2022.100089] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
17
|
Liu Y, Liu Z, Guo Z, Yan T, Jin C, Wu J. Enhancement of the degradation capacity of IsPETase for PET plastic degradation by protein engineering. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 834:154947. [PMID: 35367265 DOI: 10.1016/j.scitotenv.2022.154947] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/06/2022] [Revised: 03/16/2022] [Accepted: 03/27/2022] [Indexed: 06/14/2023]
Abstract
The enormous waste of polyethylene terephthalate (PET) plastic has a great negative impact on the ecological environment because of its chemical inertia. To reduce the environmental threat posed by PET plastic, researchers gradually concentrate on the biodegradation of PET plastic. In this study, DuraPETaseN233C/S282C/H214S/S245R (DuraPETase-4M) was designed through protein engineering, which can be used to improve the efficiency of PET plastic biodegradation. Based on the DuraPETase, a pair of disulfide bonds (N233C/S282C) was added to improve the thermal stability. Meanwhile, the key region flexibility adjustment (H214S) was proposed to enhance the biodegradation capacity of PET plastic. Additionally, protein surface electrostatic charge optimization (S245R) was adopted to improve the binding ability between enzyme and PET plastic. Based on molecular dynamic simulations (MDs), the rationality of the design was further verified. This study provides a strategy for obtaining high-efficiency PET degradation mutants and a new possibility of environmentally friendly plastic degradation.
Collapse
Affiliation(s)
- Yidi Liu
- State Key Laboratory of Food Science and Technology, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; School of Biotechnology and Key Laboratory of Industrial Biotechnology Ministry of Education, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; International Joint Laboratory on Food Safety, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China
| | - Zhanzhi Liu
- State Key Laboratory of Food Science and Technology, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; School of Biotechnology and Key Laboratory of Industrial Biotechnology Ministry of Education, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; International Joint Laboratory on Food Safety, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China
| | - Zhiyong Guo
- State Key Laboratory of Food Science and Technology, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; School of Biotechnology and Key Laboratory of Industrial Biotechnology Ministry of Education, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; International Joint Laboratory on Food Safety, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China
| | - Tingting Yan
- State Key Laboratory of Food Science and Technology, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; School of Biotechnology and Key Laboratory of Industrial Biotechnology Ministry of Education, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; International Joint Laboratory on Food Safety, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China
| | - Changxu Jin
- State Key Laboratory of Food Science and Technology, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; School of Biotechnology and Key Laboratory of Industrial Biotechnology Ministry of Education, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; International Joint Laboratory on Food Safety, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China
| | - Jing Wu
- State Key Laboratory of Food Science and Technology, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; School of Biotechnology and Key Laboratory of Industrial Biotechnology Ministry of Education, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China; International Joint Laboratory on Food Safety, Jiangnan University, 1800 Lihu Avenue, Wuxi 214122, China.
| |
Collapse
|
18
|
Hongkailers S, Jing Y, Wang Y, Hinchiranan N, Yan N. Recovery of Arenes from Polyethylene Terephthalate (PET) over a Co/TiO 2 Catalyst. CHEMSUSCHEM 2021; 14:4330-4339. [PMID: 34390526 DOI: 10.1002/cssc.202100956] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/07/2021] [Revised: 08/10/2021] [Indexed: 06/13/2023]
Abstract
Upcycling of spent plastics has become a more emergent topic than ever before due to the rapid generation of plastic waste associated with the change of lifestyles of the human society. Polyethylene terephthalate (PET) is a major aromatic plastic and herein, the conversion of PET back into arenes was demonstrated in a one-pot reaction combining depolymerization and hydrodeoxygenation (HDO) over a Co/TiO2 catalyst. The effectiveness of the Co/TiO2 catalyst in HDO and the underlining reaction pathway were established using the PET monomer terephthalic acid (TPA) as the substrate. Quantitative TPA conversion together with 75.2 mol% xylene and toluene selectivity under 30 bar initial H2 pressure at 340 °C was achieved after 4 h reaction. More encouragingly, the catalyst induced both depolymerization and HDO reaction via C-O bond cleavage when PET was used as a substrate. 78.9 mol% arenes (toluene and xylene) was obtained under optimized conditions.
Collapse
Affiliation(s)
- Surachet Hongkailers
- Department of Chemical Technology, Chulalongkorn University, 254 Phyathai Road, Bangkok, 10330, Thailand
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Yaxuan Jing
- Key Laboratory for Advanced Materials and Joint International Research Laboratory of Precision Chemistry and Molecular Engineering, Feringa Nobel Prize Scientist Joint Research Center, Research Institute of Industrial Catalysis, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai, 200237, P. R. China
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Yanqin Wang
- Key Laboratory for Advanced Materials and Joint International Research Laboratory of Precision Chemistry and Molecular Engineering, Feringa Nobel Prize Scientist Joint Research Center, Research Institute of Industrial Catalysis, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai, 200237, P. R. China
| | - Napida Hinchiranan
- Department of Chemical Technology, Chulalongkorn University, 254 Phyathai Road, Bangkok, 10330, Thailand
- Center of Excellence on Petrochemical and Materials Technology (PETROMAT), Chulalongkorn University, 254 Phyathai Road, Bangkok, 10330, Thailand
- Center of Excellence in Catalysis for Bioenergy and Renewable Chemicals (CBRC), Chulalongkorn University, 254 Phyathai Road, Bangkok, 10330, Thailand
| | - Ning Yan
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| |
Collapse
|
19
|
Chu J, Hu X, Kong L, Wang N, Zhang S, He M, Ouyang W, Liu X, Lin C. Dynamic flow and pollution of antimony from polyethylene terephthalate (PET) fibers in China. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 771:144643. [PMID: 33540166 DOI: 10.1016/j.scitotenv.2020.144643] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/03/2020] [Revised: 11/24/2020] [Accepted: 12/15/2020] [Indexed: 06/12/2023]
Abstract
Antimony (Sb), a regulated contaminant, is added as a catalyst in the process of polyethylene terephthalate (PET) synthesis. Previously, Sb release from PET bottles and films was studied. However, Sb release from PET fibers (the most common form of PET) is limited. Therefore, a network model of material flow for PET fibers in China is developed, and the anthropogenic Sb flow and release entering into the hydrosphere, pedosphere, and atmosphere are studied based on microexperiments and macromodels. To compensate for the uncertainty caused by material flow analysis, Sb pollution in the surrounding areas (the drinking water of nearby residents and sediments of nearby river area) is further explored by combining field investigations and sample analysis. The results are as follows: 1) the manufacture stage of PET fibers is the main source of Sb release (2926 t), followed by the dyeing (2223 t) and weaving (908 t) stages; 2) Sb release (1108 t) from waste PET fibers subjected to landfill disposal is the highest. Sb release (872 t) from discarded fiber waste is second highest. Sb release from PET fibers subjected to mechanical recycling, incineration, and chemical recycling is 784, 284, and 25 t, respectively; and 3) an obvious source-sink relationship is found between anthropogenic Sb in the rivers and sediments and the intensity of the industries. This study suggests that Sb from PET fibers should be properly managed to prevent widespread dispersion in the hydrosphere, pedosphere, and atmosphere.
Collapse
Affiliation(s)
- Jianwen Chu
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China
| | - Xingyun Hu
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China; State Key Laboratory of Environmental Aquatic Chemistry, Research Center for Eco-environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China
| | - Linghao Kong
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China; State Key Laboratory of Environmental Aquatic Chemistry, Research Center for Eco-environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China
| | - Ningning Wang
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China
| | - Suhuan Zhang
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China
| | - Mengchang He
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China.
| | - Wei Ouyang
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China
| | - Xitao Liu
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China
| | - Chunye Lin
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing 100875, China
| |
Collapse
|