Petrography of construction and demolition waste (CDW) from Abruzzo region (Central Italy)

Thermoactivated cement from construction and demolition waste for pavement base stabilization: A case study in Brazil

Construction and demolition waste (CDW) worldwide generation accounts 10 billion tonnes yearly. The major fraction is landfilled requiring innovative recycling methods to reduce the associated environmental impacts and to increase its circularity. Our study demonstrated the feasibility of using different CDW fines to develop recycled cements and optimized the content of CDW recycled cements with well-graded crushed stone (WGCS) for use as pavement base layer. We scaled up the study obtaining CDW cement and aggregates from a local recycling plant, as well as pilot pavement sections designed, constructed and field deflections measured. As results, the CDW cement pastes exhibited accumulated heat values of up to 111 J g-1 and achieved a compressive strength of approximately 16 MPa. The unconfined compressive strength and resilient modulus (RM) achieved using CDW cement and WGCS were 2-3 and >3000 MPa, respectively. The sections constructed using CDW cement exhibited intermediate behaviour compared to those obtained using reference materials (6% Portland cement-WGCS and a conventional granular base made using WGCS). The deflection decreased over time owing to the pozzolanic reaction.

Physico-Mechanical Performances of Mortars Prepared with Sorted Earthquake Rubble: The Role of CDW Type and Contained Crystalline Phases

Construction and demolition waste (CDW) from earthquake rubbles was used here as recycled aggregates (RA) in cementitious binders. The materials were sorted in six groups: concrete (CO), natural stone (NS), tile (TI), brick (BR), perforated brick (PF) and roof tile (RT). The abundance (wt.%) of crystalline phases in each RA type was determined by X-ray Powder Diffraction (XRPD). Each group of RAs was used alone (100 wt.% of RA) and mixed with quartz-rich virgin aggregates (VA) to prepare 13 types of mortars (12 specimens per type): one reference mortar (RM) with only VA, six recycled aggregate mortars (RAM) and six recycled-plus-virgin aggregate mortars (RVAM). The physical and mechanical properties of aggregates and mortars reflect the type and abundance of crystalline phases in each CDW group. Recycled mortars rich in concrete, natural stones and tiles have better mechanical performance than mortars prepared with recycled bricks, perforated bricks and roof tiles. For each RA, RVAMs have superior mechanical characteristics than the corresponding RAM. Since the type and amount of phases contained in recycled aggregates strongly control the mechanical performance of new construction materials, they should be routinely quantified as reported here, in addition to other physical features (water absorption, density, etc.). The separation of heterogeneous CDW into homogeneous RA groups is necessary for the production of new construction materials with stable and predictable performances to ensure CDW recycling, especially in areas hit by major adverse events, where large amounts of still valuable materials could be used for reconstruction processes.

Recycled Aggregate: A Viable Solution for Sustainable Concrete Production

Construction and demolition activities consume large amounts of natural resources, generating 4.5 bi tons of solid waste/year, called construction and demolition waste (C&DW) and other wastes, such as ceramic, polyethylene terephthalate (PET), glass, and slag. Furthermore, around 32 bi tons of natural aggregate (NA) are extracted annually. In this scenario, replacing NA with recycled aggregate (RA) from C&DW and other wastes can mitigate environmental problems. We review the use of RA for concrete production and draw the main challenges and outlook. RA reduces concrete’s fresh and hardened performance compared to NA, but these reductions are often negligible when the replacement levels are kept up to 30%. Furthermore, we point out efficient strategies to mitigate these performance reductions. Efforts must be spent on improving the efficiency of RA processing and the international standardization of RA.