Kinetics of the chemical oxidation of polysulfide anions in aqueous solution

Sedimentary parameters control the sulfur isotope composition of marine pyrite

Reconstructions of coupled carbon, oxygen, and sulfur cycles rely heavily on sedimentary pyrite sulfur isotope compositions (δ34Spyr). With a model of sediment diagenesis, paired with global datasets of sedimentary parameters, we show that the wide range of δ34Spyr (~100 per mil) in modern marine sediments arises from geographic patterns in the relative rates of diffusion, burial, and microbial reduction of sulfate. By contrast, the microbial sulfur isotope fractionation remains large and relatively uniform. Over Earth history, the effect of increasing seawater sulfate and oxygen concentrations on sulfate and sulfide transport and reaction may explain the corresponding increase observed in the δ34S offset between sulfate and pyrite. More subtle variations may be related to changes in depositional environments associated with sea level fluctuations and supercontinent cycles.

Anaerobic sulphide removal by haloalkaline sulphide oxidising bacteria

Sulphide is a toxic and corrosive compound and requires removal from waste streams. Recent discoveries show that sulphide oxidising bacteria (SOB) from modern desulphurisation plants are able to spatially separate sulphide removal and oxygen reduction when exposed to intermittent anaerobic and aerobic environments. Here, SOB act as electron shuttles between electron donor and acceptor. The underlying mechanisms for electron shuttling are of yet unknown. To investigate the anaerobic sulphide removal of SOB, batch experiments and mathematical models were applied. The sulphide removal capacity decreased at increasing biomass concentrations. At 0.6 mgN/L SOB could remove up to 8 mgS/mgN in 30 min. It was found that biological activity determines sulphide removal, alongside chemical processes. Anaerobic oxidation of electron carriers was determined to only explain 0.1% of charge storage, where irreversible cleavage of long chain polysulphides could explain full sulphide storage. Different sulphide removal and intracellular storage processes are postulated.

The Effects of Antioxidant Nutraceuticals on Cellular Sulfur Metabolism and Signaling

Significance: Nutraceuticals are ingested for health benefits, in addition to their general nutritional value. These dietary supplements have become increasingly popular since the late 20th century and they are a rapidly expanding global industry approaching a half-trillion U.S. dollars annually. Many nutraceuticals are promulgated as potent antioxidants. Recent Advances: Experimental support for the efficacy of nutraceuticals has lagged behind anecdotal exuberance. However, accumulating epidemiological evidence and recent, well-controlled clinical trials are beginning to support earlier animal and in vitro studies. Although still somewhat limited, encouraging results have been suggested in essentially all organ systems and against a wide range of pathophysiological conditions. Critical Issues: Health benefits of "antioxidant" nutraceuticals are largely attributed to their ability to scavenge oxidants. This has been criticized based on several factors, including limited bioavailability, short tissue retention time, and the preponderance of endogenous antioxidants. Recent attention has turned to nutraceutical activation of downstream antioxidant systems, especially the Keap1/Nrf2 (Kelch like ECH associated protein 1/nuclear factor erythroid 2-related factor 2) axis. The question now becomes, how do nutraceuticals activate this axis? Future Directions: Reactive sulfur species (RSS), including hydrogen sulfide (H2S) and its metabolites, are potent activators of the Keap1/Nrf2 axis and avid scavengers of reactive oxygen species. Evidence is beginning to accumulate that a variety of nutraceuticals increase cellular RSS by directly providing RSS in the diet, or through a number of catalytic mechanisms that increase endogenous RSS production. We propose that nutraceutical-specific targeting of RSS metabolism will lead to the design and development of even more efficacious antioxidant therapeutic strategies. Antioxid. Redox Signal. 38, 68-94.

Removal of small elemental sulfur particles by polysulfide formation in a sulfidic reactor

For over 30 years, biological gas desulfurization under halo-alkaline conditions has been studied and optimized. This technology is currently applied in already 270 commercial installations worldwide. Sulfur particle separation, however, remains a challenge; a fraction of sulfur particles is often too small for liquid-solid separation with conventional separation technology. In this article, we report the effects of a novel sulfidic reactor, inserted in the conventional process set-up, on sulfur particle size and morphology. In the sulfidic reactor polysulfide is produced by the reaction of elemental sulfur particles and sulfide, which is again converted to elemental sulfur in a gas-lift reactor. We analyzed sulfur particles produced in continuous, long term lab-scale reactor experiments under various sulfide concentrations and sulfidic retention times. The analyses were performed with laser diffraction particle size analysis and light microscopy. These show that the smallest particles (< 1 µm) have mostly disappeared under the highest sulfide concentration (4.1 mM) and sulfidic retention time (45 min). Under these conditions also agglomeration of sulfur particles was promoted. Model calculations with thermodynamic and previously derived kinetic data on polysulfide formation confirm the experimental data on the removal of the smallest particles. Under the 'highest sulfidic pressure', the model predicts that equilibrium conditions are reached between sulfur, sulfide and polysulfide and that 100% of the sulfur particles <1 µm are dissolved by the (autocatalytic) formation of polysulfides. These experiments and modeling results demonstrate that the insertion of a novel sulfidic reactor in the conventional process set-up promotes the removal of the smallest individual sulfur particles and promotes the production of sulfur agglomerates. The novel sulfidic reactor is therefore a promising process addition with the potential to improve process operation, sulfur separation and sulfur recovery.

The antioxidant and oxidant properties of hydropersulfides (RSSH) and polysulfide species

It has become apparent that hydrogen sulfide (H2S), hydropersulfides (RSSH) and other polysulfide species are all intimately linked biochemically. Indeed, at least some of the biological activity attributed to hydrogen sulfide (H2S) may actually be due to its conversion to RSSH and derived polysulfur species (and vice-versa). The unique chemistry associated with the hydropersulfide functional group (-SSH) predicts that it possesses possible protective properties that can help a cell contend with oxidative and/or electrophilic stress. However, since RSSH and polysulfides possess chemical properties akin to disulfides (RSSR), they can also be sources of oxidative/electrophilic stress/signaling as well. Herein are discussed the unique chemistry, possible biochemistry and the physiological implications of RSSH (and polysulfides), especially as it pertains to their putative cellular protection properties against a variety of stresses and/or as possible stressors/signaling agents themselves.

Naphthoquinones Oxidize H2S to Polysulfides and Thiosulfate, Implications for Therapeutic Applications

1,4-Napththoquinones (NQs) are clinically relevant therapeutics that affect cell function through production of reactive oxygen species (ROS) and formation of adducts with regulatory protein thiols. Reactive sulfur species (RSS) are chemically and biologically similar to ROS and here we examine RSS production by NQ oxidation of hydrogen sulfide (H2S) using RSS-specific fluorophores, liquid chromatography-mass spectrometry, UV-Vis absorption spectrometry, oxygen-sensitive optodes, thiosulfate-specific nanoparticles, HPLC-monobromobimane derivatization, and ion chromatographic assays. We show that NQs, catalytically oxidize H2S to per- and polysulfides (H2Sn, n = 2−6), thiosulfate, sulfite and sulfate in reactions that consume oxygen and are accelerated by superoxide dismutase (SOD) and inhibited by catalase. The approximate efficacy of NQs (in decreasing order) is, 1,4-NQ ≈ juglone ≈ plumbagin > 2-methoxy-1,4-NQ ≈ menadione >> phylloquinone ≈ anthraquinone ≈ menaquinone ≈ lawsone. We propose that the most probable reactions are an initial two-electron oxidation of H2S to S0 and reduction of NQ to NQH2. S0 may react with H2S or elongate H2Sn in variety of reactions. Reoxidation of NQH2 likely involves a semiquinone radical (NQ·−) intermediate via several mechanisms involving oxygen and comproportionation to produce NQ and superoxide. Dismutation of the latter forms hydrogen peroxide which then further oxidizes RSS to sulfoxides. These findings provide the chemical background for novel sulfur-based approaches to naphthoquinone-directed therapies.

A systematic review of gold extraction: Fundamentals, advancements, and challenges toward alternative lixiviants

Since the birth of cyanidation, it has been dominant in the gold extraction industry. Recently, with the increasing awareness of environmental hazards and potential risks posed by the severe toxicity of cyanide, attempts to seek alternative lixiviants have arisen. Over the past three decades, a significant amount of literature has examined alternative lixiviants to cyanide for recovering gold, while few industrial applications have been reported due to various obstacles, such as toxicity, excessive consumption, or low leaching efficiency. These obstacles are progressively overcome in multiple ways, including process improvement, system optimization, use of co-intensifying systems, and development of additives. In this paper, related studies about alternative lixiviants and methods such as cyanide, thiosulfate, thiourea, thiocyanate, polysulfides, halides, and microbial leaching are summarized. The history, fundamentals, advancements, and challenges of alternative lixiviants are fully concluded to provide a reference for cleaner gold production. In addition, the comprehensive performance of lixiviants was evaluated according to a novel evaluation criterion proposed in terms of economy, efficiency, and environment.

Investigating role of abiotic side and finding optimum abiotic condition for improving gas biodesulfurization using Thioalkalivibrio versutus

Hydrogen sulfide (H₂S) is a super toxic substance that produces SO_x gases when combusted. Therefore, it should be removed from gas streams. Biodesulfurization is one of the developing methods for removing sulfide. Gas biodesulfurization must be accelerated to be competitive with chemical processes. This process has two sides: biotic and abiotic sides. To increase the rate of sulfide removal, this substance should be given to the bacteria in the maximum amount (Max. − R_{HS B}). Therefore, it is necessary to minimize the rate of adverse abiotic reactions of sulfide (Min. − R_{HS A}). Minimizing the sulfide reaction with biosulfur and oxygen and thiosulfate generation (Min. − R_{HS thio2}) was assessed in de-microbized medium. It was concluded that the pH should be kept as low as possible. The kinetics of thiosulfate formation from sulfide oxidation (− R_{HS thio1}) are strongly dependent on the sulfide concentration, and to minimize this reaction rate, sulfide should be gently injected into the culture. To minimize sulfide reduction to hydrogen sulfide (Min. − R_{HS rev}), the pH should be kept as high as possible. Using the Design Expert v.13, a model was driven for the abiotic side to obtain optimum condition. The pH value was found to be 8.2 and the sulfide concentration to 2.5E−05 M. Thioalkalivibrio versutus cultivation under identified abiotic conditions resulted in biological removal of sulfide up to 1.5 g/h. The culture was not able to remove 2 g/h input sulfide, and to increase this, the biotic side should be studied.

Evaluation of remediation of Cr(VI)-contaminated soils by calcium polysulfide: Long-term stabilization and mechanism studies

In the remediation of Cr(VI)-contaminated soils, the effectiveness and long-term stability are critical qualities for the selection of a reductant. In current engineering practices, iron-based materials and sulfides are the most prevalent reductants, and calcium polysulfide (CaS₄) is considered as the one with the highest effectiveness and strongest long-term stabilization ability. But this opinion is questioned by the high interference ability of CaS₄ to soil Cr(VI) analysis. This study provides a pretreatment method to eliminate the interference of residual ferrous and sulfides to soil Cr(VI) analysis. By this pretreatment method and comparing with FeSO₄ and Na₂S, the mechanisms of the false high effectiveness and strong long-term stabilization ability of CaS₄ is revealed. In the remediation process, CaS₄ produces much elemental sulfur (S⁰) which remains in the soils. During the alkaline digestion, the S⁰ generates polysulfide which reduces the extracted Cr(VI), inducing serious negative analysis bias. When this negative bias is eliminated by pretreatment method, analysis results show that CaS₄ exhibits lowest effectiveness. The S⁰ cannot be leached away from soils and oxidized by oxygen under natural conditions, this makes CaS₄ exhibit a persistent interference ability, which is mistaken for a strong long-term stabilization ability.

Photoluminescence investigations of sulfur quantum dots synthesized by a bubbling-assisted strategy

Sulfur quantum dots (S-dots) emerge as promising luminescent materials owing to their remarkable optical properties. However, the mechanisms of their formation and photoluminescence remain concealed. We reveal these mechanisms by the bubbling-assisted synthesis and spectroscopic study of S-dots formed from sulfur ions produced by the alkaline oxidation of bulk sulfur under the passivation of PEG. The emission colour of the S-dots depends on the size, explained by the quantum confinement effect. The dots' luminescent quantum efficiency is strongly affected by the surface sulfur species, which is optimized by the proper surface oxidation. The simple synthesis, excellent luminescence properties, and metal-free nature attract S-dots to optoelectronic and electroluminescence applications.

SG1002 and Catenated Divalent Organic Sulfur Compounds as Promising Hydrogen Sulfide Prodrugs

Significance: Sulfur has a critical role in protein structure/function and redox status/signaling in all living organisms. Although hydrogen sulfide (H2S) and sulfane sulfur (SS) are now recognized as central players in physiology and pathophysiology, the full scope and depth of sulfur metabolome's impact on human health and healthy longevity has been vastly underestimated and is only starting to be grasped. Since many pathological conditions have been related to abnormally low levels of H2S/SS in blood and/or tissues, and are amenable to treatment by H2S supplementation, development of safe and efficacious H2S donors deserves to be undertaken with a sense of urgency; these prodrugs also hold the promise of becoming widely used for disease prevention and as antiaging agents. Recent Advances: Supramolecular tuning of the properties of well-known molecules comprising chains of sulfur atoms (diallyl trisulfide [DATS], S8) was shown to lead to improved donors such as DATS-loaded polymeric nanoparticles and SG1002. Encouraging results in animal models have been obtained with SG1002 in heart failure, atherosclerosis, ischemic damage, and Duchenne muscular dystrophy; with TC-2153 in Alzheimer's disease, schizophrenia, age-related memory decline, fragile X syndrome, and cocaine addiction; and with DATS in brain, colon, gastric, and breast cancer. Critical Issues: Mode-of-action studies on allyl polysulfides, benzyl polysulfides, ajoene, and 12 ring-substituted organic disulfides and thiosulfonates led several groups of researchers to conclude that the anticancer effect of these compounds is not mediated by H2S and is only modulated by reactive oxygen species, and that their central model of action is selective protein S-thiolation. Future Directions: SG1002 is likely to emerge as the H2S donor of choice for acquiring knowledge on this gasotransmitter's effects in animal models, on account of its unique ability to efficiently generate H2S without byproducts and in a slow and sustained mode that is dose independent and enzyme independent. Efficient tuning of H2S donation characteristics of DATS, dibenzyl trisulfide, and other hydrophobic H2S prodrugs for both oral and parenteral administration will be achieved not only by conventional structural modification of a lead molecule but also through the new "supramolecular tuning" paradigm.

Oxidative, Reductive, and Nitrosative Stress Effects on Epigenetics and on Posttranslational Modification of Enzymes in Cardiometabolic Diseases

Oxidative (OS), reductive (RS), and nitrosative (NSS) stresses produce carbonylation, glycation, glutathionylation, sulfhydration, nitration, and nitrosylation reactions. OS, RS, and NSS are interrelated since RS results from an overactivation of antioxidant systems and NSS is the result of the overactivation of the oxidation of nitric oxide (NO). Here, we discuss the general characteristics of the three types of stress and the way by which the reactions they induce (a) damage the DNA structure causing strand breaks or inducing the formation of 8-oxo-d guanosine; (b) modify histones; (c) modify the activities of the enzymes that determine the establishment of epigenetic cues such as DNA methyl transferases, histone methyl transferases, acetyltransferases, and deacetylases; (d) alter DNA reparation enzymes by posttranslational mechanisms; and (e) regulate the activities of intracellular enzymes participating in metabolic reactions and in signaling pathways through posttranslational modifications. Furthermore, the three types of stress may establish new epigenetic marks through these reactions. The development of cardiometabolic disorders in adult life may be programed since early stages of development by epigenetic cues which may be established or modified by OS, RS, and NSS. Therefore, the three types of stress participate importantly in mediating the impact of the early life environment on later health and heritability. Here, we discuss their impact on cardiometabolic diseases. The epigenetic modifications induced by these stresses depend on union and release of chemical residues on a DNA sequence and/or on amino acid residues in proteins, and therefore, they are reversible and potentially treatable.

The Heterotrophic Bacterium Cupriavidus pinatubonensis JMP134 Oxidizes Sulfide to Sulfate with Thiosulfate as a Key Intermediate

Heterotrophic bacteria actively participate in the biogeochemical cycle of sulfur on Earth. The heterotrophic bacterium Cupriavidus pinatubonensis JMP134 contains several enzymes involved in sulfur oxidation, but how these enzymes work together to oxidize sulfide in the bacterium has not been studied. Using gene-deletion and whole-cell assays, we determined that the bacterium uses sulfide:quinone oxidoreductase to oxidize sulfide to polysulfide, which is further oxidized to sulfite by persulfide dioxygenase. Sulfite spontaneously reacts with polysulfide to produce thiosulfate. The sulfur-oxidizing (Sox) system oxidizes thiosulfate to sulfate. Flavocytochrome c sulfide dehydrogenase enhances thiosulfate oxidation by the Sox system but couples with the Sox system for sulfide oxidation to sulfate in the absence of sulfide:quinone oxidoreductase. Thus, C. pinatubonensis JMP134 contains a main pathway and a contingent pathway for sulfide oxidation.IMPORTANCE We establish a new pathway of sulfide oxidation with thiosulfate as a key intermediate in Cupriavidus pinatubonensis JMP134. The bacterium mainly oxidizes sulfide by using sulfide:quinone oxidoreductase, persulfide dioxygenase, and the Sox system with thiosulfate as a key intermediate. Although the purified and reconstituted Sox system oxidizes sulfide, its rate of sulfide oxidation in C. pinatubonensis JMP134 is too low to be physiologically relevant. The findings reveal how these sulfur-oxidizing enzymes participate in sulfide oxidation in a single bacterium.

Pin-point denitrification for groundwater purification without direct chemical dosing: Demonstration of a two-chamber sulfide-driven denitrifying microbial electrochemical system

The nitrate concentration in groundwater has been increasing over time due to the intensive use of nitrogen fertilizer. Current nitrate removal technologies are restricted by the high operational cost or the inevitable secondary contaminations. This study proposed a two-chamber sulfide-driven denitrifying microbial electrochemical system to denitrify nitrate in its cathode chamber. Instead of conventional organic substrates, sulfide is oxidized in the anode chamber to generate electrons for cathodic denitrification. Long-term performance of this novel system was evaluated over 200 days (100 cycles) of batch-fed operation. With the assistance of anodic microorganisms, sulfide can be directly oxidized to sulfate thus avoiding passivating the anode. Catalyzed by the cathodic microorganisms, complete denitrification was realized with neither nitrite nor nitrous oxide accumulation. Benefiting from the electroautotrophic behavior of the functional microorganisms, high electron utilization efficiencies were achieved, 80% and 85% for the anode (sulfide oxidation) and the cathode (denitrification) respectively. Both observed electrode potentials and microbial analyses revealed that cytochrome c is the crucial electron transfer mediator in the cathodic electron transfer for denitrification. Based on the analysis of planktonic and biofilm microbial samples, anodic and cathodic extracellular electron transfer bioprocesses are proposed, both the direct and mediated electron transfers involved, as were revealed by immobilized and planktonic functional microorganisms, respectively. This study demonstrates the feasibility of purifying nitrate-contaminated groundwater without sacrificing its water quality in a separate mode of treatment. This concept can be extended to a broader field, in which the water requires bio-polishing without introducing unwanted secondary pollution like the post-denitrification of wastewater effluents.

Effect of dimethyl disulfide on the sulfur formation and microbial community composition during the biological H2S removal from sour gas streams

Removal of organic and inorganic sulfur compounds from sour gases is required because of their toxicity and atmospheric pollution. The most common are hydrogen sulfide (H₂S) and methanethiol (MT). Under oxygen-limiting conditions about 92 mol% of sulfide is oxidized to sulfur by haloalkaliphilic sulfur-oxidizing bacteria (SOB), whilst the remainder is oxidized either biologically to sulfate or chemically to thiosulfate. MT is spontaneously oxidized to dimethyl disulfide (DMDS), which was found to inhibit the oxidation of sulfide to sulfate. Hence, we assessed the effect of DMDS on product formation in a lab-scale biodesulfurization setup. DMDS was quantified using a newly, in-house developed analytical method. Subsequently, a chemical reaction mechanism was proposed for the formation of methanethiol and dimethyl trisulfide from the reaction between sulfide and DMDS. Addition of DMDS resulted in significant inhibition of sulfate formation, leading to 96 mol% of sulfur formation. In addition, a reduction in the dominating haloalkaliphilic SOB species, Thioalkalivibrio sulfidiphilus, was observed in favor of Thioalkaibacter halophilus as a more DMDS-tolerant with the 50 % inhibition coefficient at 2.37 mM DMDS.

Deep and high-efficiency removal of sulfate through a coupling system with sulfate-reducing and sulfur-oxidizing capacity under haloalkaliphilic condition

Sulfide from anaerobic treatment of high-sulfate wastewater would always have some adverse effects on downstream processes. In this study, a coupling anaerobic/aerobic system was developed and operated under haloalkaliphilic condition to realize deep and high-efficiency removal of sulfate without production of sulfide. A haloalkaliphilic sulfur-oxidizing strain, Thioalkalivibrio versutus SOB306, was responsible for oxidation of sulfide. The anaerobic part was first operated at optimum condition based on a previous study. Then, its effluent with an average sulfide concentration of 674 ± 33 mg·l^-1 was further directly treated by a set of 1 l biofilter with SOB306 strain under aerobic condition. Finally, 100% removal rate of sulfide was achieved at aeration rate of 0.75 l·l^-1·min^-1, ORP of - 392 mV and HRT of 4 h. The average yield of elemental sulfur reached 79.1 ± 1.3% in the filter, and the CROS achieved a conversion rate of sulfate to sulfur beyond 54%. This study for the first time revealed the characteristics and performance of the haloalkaliphilic CROS in deep treatment of high-sulfate wastewater, which paved the way for the development and application of this method in the real world.

Addition of MnO2 in synthesis of nano-rod erdite promoted tetracycline adsorption

Erdite is a rare sulphide mineral found in mafic and alkaline rocks. Only weakly crystallised fibrous erdite has been artificially synthesised via evaporation or the hydrothermal method, and the process generally requires 1–3 days and large amounts of energy to complete. In this study, well-crystallised erdite nanorods were produced within 3 h by using MnO₂ as an auxiliary reagent in a one-step hydrothermal method. Results showed that erdite could synthesised in nanorod form with a diameter of approximately 200 nm and lengths of 0.5–3 μm by adding MnO₂; moreover, the crystals grew with increasing MnO₂ addition. Without MnO₂, erdite particles were generated in irregular form. The capacity of the erdite nanorods for tetracycline (TC) adsorption was 2613.3 mg/g, which is higher than those of irregular erdite and other reported adsorbents. The major adsorption mechanism of the crystals involves a coordinating reaction between the −NH₂ group of TC and the hydroxyl group of Fe oxyhydroxide produced from erdite hydrolysis. To the best of our knowledge, this study is the first to synthesise erdite nanorods and use them in TC adsorption. Erdite nanorods may be developed as a new material in the treatment of TC-containing wastewater.

Development and validation of a physiologically based kinetic model for starting up and operation of the biological gas desulfurization process under haloalkaline conditions

Hydrogen sulfide is a toxic and corrosive gas that must be removed from gaseous hydrocarbon streams prior to combustion. This paper describes a gas biodesulfurization process where sulfur-oxidizing bacteria (SOB) facilitate sulfide conversion to both sulfur and sulfate. In order to optimize the formation of sulfur, it is crucial to understand the relations between the SOB microbial composition, kinetics of biological and abiotic sulfide oxidation and the effects on the biodesulfurization process efficiency. Hence, a physiologically based kinetic model was developed for four different inocula. The resulting model can be used as a tool to evaluate biodesulfurization process performance. The model relies on a ratio of two key enzymes involved in the sulfide oxidation process, i.e., flavocytochrome c and sulfide-quinone oxidoreductase (FCC and SQR). The model was calibrated by measuring biological sulfide oxidation rates for different inocula obtained from four full-scale biodesulfurization installations fed with gases from various industries. Experimentally obtained biological sulfide oxidation rates showed dissimilarities between the tested biomasses which could be explained by assuming distinctions in the key-enzyme ratios. Hence, we introduce a new model parameter α to whereby α describes the ratio between the relative expression levels of FCC and SQR enzymes. Our experiments show that sulfur production is the highest at low α values.

Role of extracellular reactive sulfur metabolites on microbial Se(0) dissolution

The dissolution of elemental selenium [Se(0)] during chemical weathering is an important step in the global selenium cycle. While microorganisms have been shown to play a key role in selenium dissolution in soils, the mechanisms of microbial selenium solubilization are poorly understood. In this study, we isolated a Bacillus species, designated as strain JG17, that exhibited the ability to dissolve Se(0) under oxic conditions and neutral pH. Growth of JG17 in a defined medium resulted in the production and accumulation of extracellular compounds that mediated Se(0) dissolution. Analysis of the spent medium revealed the presence of extracellular sulfite, sulfide, and thiosulfate. Abiotic Se(0) dissolution experiments with concentrations of sulfite, sulfide, and thiosulfate relevant to our system showed similar extents of selenium solubilization as the spent medium. Together, these results indicate that the solubilization of Se(0) by JG17 occurs via the release of extracellular inorganic sulfur compounds followed by chemical dissolution of Se(0) by the reactive sulfur metabolites. Our findings suggest that the production of reactive sulfur metabolites by soil microorganisms and the formation of soluble selenosulfur complexes can promote selenium mobilization during chemical weathering.

Increasing the Selectivity for Sulfur Formation in Biological Gas Desulfurization

In the biotechnological desulfurization process under haloalkaline conditions, dihydrogen sulfide (H₂S) is removed from sour gas and oxidized to elemental sulfur (S₈) by sulfide-oxidizing bacteria. Besides S₈, the byproducts sulfate (SO₄^2-) and thiosulfate (S₂O₃^2-) are formed, which consume caustic and form a waste stream. The aim of this study was to increase selectivity toward S₈ by a new process line-up for biological gas desulfurization, applying two bioreactors with different substrate conditions (i.e., sulfidic and microaerophilic), instead of one (i.e., microaerophilic). A 111-day continuous test, mimicking full scale operation, demonstrated that S₈ formation was 96.6% on a molar H₂S supply basis; selectivity for SO₄^2- and S₂O₃^2- were 1.4 and 2.0% respectively. The selectivity for S₈ formation in a control experiment with the conventional 1-bioreactor line-up was 75.6 mol %. At start-up, the new process line-up immediately achieved lower SO₄^2- and S₂O₃^2- formations compared to the 1-bioreactor line-up. When the microbial community adapted over time, it was observed that SO₄^2- formation further decreased. In addition, chemical formation of S₂O₃^2- was reduced due to biologically mediated removal of sulfide from the process solution in the anaerobic bioreactor. The increased selectivity for S₈ formation will result in 90% reduction in caustic consumption and waste stream formation compared to the 1-bioreactor line-up.

Interaction of Quinone-Related Electron Acceptors with Hydropersulfide Na2S2: Evidence for One-Electron Reduction Reaction

We previously reported that 9,10-phenanthraquinone (9,10-PQ), an atmospheric electron acceptor, undergoes redox cycling with dithiols as electron donors, resulting in the formation of semiquinone radicals and monothiyl radicals; however, monothiols have little reactivity. Because persulfide and polysulfide species are highly reducing, we speculate that 9,10-PQ might undergo one-electron reduction with these reactive sulfides. In the present study, we explored the redox cycling capability of a variety of quinone-related electron acceptors, including 9,10-PQ, during interactions with the hydropersulfide Na₂S₂ and its related polysulfides. No reaction occurred when 9,10-PQ was incubated with Na₂S; however, when 5 μM 9,10-PQ was incubated with either 250 μM Na₂S₂ or Na₂S₄, we detected extensive consumption of dissolved oxygen (84 μM). Under these conditions, both the semiquinone radicals of 9,10-PQ and their thiyl radical species were also detected using ESR, suggesting that a redox cycle reaction occurred utilizing one-electron reduction processes. Notably, the perthiyl radicals remained stable even under aerobic conditions. Similar phenomenon has also been observed with other electron acceptors, such as pyrroloquinoline quinone, vitamin K₃, and coenzyme Q10. Our experiments with N-methoxycarbonyl penicillamine persulfide (MCPSSH), a precursor for endogenous cysteine persulfide, suggested the possibility of a redox coupling reaction with 9,10-PQ inside cells. Our study indicates that hydropersulfide and its related polysulfides are efficient electron donors that interact with quinones. Redox coupling reactions between quinoid electron acceptors and such highly reactive thiols might occur in biological systems.

The role of polysulfide dianions and radical anions in the chemical, physical and biological sciences, including sulfur-based batteries

Polysulfide dianions and radical anions play a crucial role in biological chemistry, geochemical processes, alkali metal–sulfur batteries, organic syntheses, coordination chemistry, and materials sciences.

BigR is a sulfide sensor that regulates a sulfur transferase/dioxygenase required for aerobic respiration of plant bacteria under sulfide stress

To cope with toxic levels of H2S, the plant pathogens Xylella fastidiosa and Agrobacterium tumefaciens employ the bigR operon to oxidize H2S into sulfite. The bigR operon is regulated by the transcriptional repressor BigR and it encodes a bifunctional sulfur transferase (ST) and sulfur dioxygenase (SDO) enzyme, Blh, required for H2S oxidation and bacterial growth under hypoxia. However, how Blh operates to enhance bacterial survival under hypoxia and how BigR is deactivated to derepress operon transcription is unknown. Here, we show that the ST and SDO activities of Blh are in vitro coupled and necessary to oxidize sulfide into sulfite, and that Blh is critical to maintain the oxygen flux during A. tumefaciens respiration when oxygen becomes limited to cells. We also show that H2S and polysulfides inactivate BigR leading to operon transcription. Moreover, we show that sulfite, which is produced by Blh in the ST and SDO reactions, is toxic to Citrus sinensis and that X. fastidiosa-infected plants accumulate sulfite and higher transcript levels of sulfite detoxification enzymes, suggesting that they are under sulfite stress. These results indicate that BigR acts as a sulfide sensor in the H2S oxidation mechanism that allows pathogens to colonize plant tissues where oxygen is a limiting factor.

Turnover Rates of Intermediate Sulfur Species (Sx2-, S0, S2O32-, S4O62-, SO32-) in Anoxic Freshwater and Sediments

The microbial reduction of sulfate to sulfide coupled to organic matter oxidation followed by the transformation of sulfide back to sulfate drives a dynamic sulfur cycle in a variety of environments. The oxidative part of the sulfur cycle in particular is difficult to constrain because the eight electron oxidation of sulfide to sulfate occurs stepwise via a suite of biological and chemical pathways and produces a wide variety of intermediates (S x 2 - , S0, S2O 3 2 - , S4O 6 2 - , and SO 3 2 - ), which may in turn be oxidized, reduced or disproportionated. Although the potential processes affecting these intermediates are well-known from microbial culture and geochemical studies, their significance and rates in the environment are not well constrained. In the study presented here, time-course concentration measurements of intermediate sulfur species were made in amended freshwater water column and sediment incubation experiments in order to constrain consumption rates and processes. In sediment incubations, consumption rates were S colloidal 0 > S x 2 - > SO 3 2 - ≈ S4O 6 2 - > S2O 3 2 - , which is consistent with previous measurements of SO 3 2 - , S4O 6 2 - , and S2O 3 2 - consumption rates in marine sediments. In water column incubations, however, the relative reactivity was S colloidal 0 > SO 3 2 - > S x 2 - > S2O 3 2 - > S4O 6 2 - . Consumption of thiosulfate, tetrathionate and sulfite was primarily biological, whereas it was not possible to distinguish between abiotic and biological polysulfide consumption in either aqueous or sediment incubations. S colloidal 0 consumption in water column experiments was biologically mediated, however, rapid sedimentary consumption was likely due to reactions with iron minerals. These experiments provide important constraints on the biogeochemical reactivity of intermediate sulfur species and give further insight into the diversity of biological and geochemical processes that comprise (cryptic) environmental sulfur cycling.

Impact of Aeolian Dry Deposition of Reactive Iron Minerals on Sulfur Cycling in Sediments of the Gulf of Aqaba

The Gulf of Aqaba is an oligotrophic marine system with oxygen-rich water column and organic carbon-poor sediments (≤0.6% at sites that are not influenced by anthropogenic impact). Aeolian dust deposition from the Arabian, Sinai, and Sahara Deserts is an important source of sediment, especially at the deep-water sites of the Gulf, which are less affected by sediment transport from the Arava Desert during seasonal flash floods. Microbial sulfate reduction in sediments is inferred from the presence of pyrite (although at relatively low concentrations), the presence of sulfide oxidation intermediates, and by the sulfur isotopic composition of sulfate and solid-phase sulfides. Saharan dust is characterized by high amounts of iron minerals such as hematite and goethite. We demonstrated, that the resulting high sedimentary content of reactive iron(III) (hydr)oxides, originating from this aeolian dry deposition of desert dust, leads to fast re-oxidation of hydrogen sulfide produced during microbial sulfate reduction and limits preservation of reduced sulfur in the form of pyrite. We conclude that at these sites the sedimentary sulfur cycle may be defined as cryptic.

Kinetics and mechanisms of amorphous FeS2 induced Cr(VI) reduction

A novel reductant, amorphous FeS₂ (FeS₂₍am₎) was synthesized to remove hexavalent chromium (Cr(VI)). The stoichiometry, kinetics and mechanisms of FeS₂₍am₎ induced Cr(VI) reduction were studied under anaerobic conditions with a pH range of 5.0-13.0. Results showed that FeS₂₍am₎ was efficient in removing aqueous Cr(VI) with a stoichiometry of Cr(VI): FeS₂₍am₎ ∼1: 0.9. Moreover, the reduction kinetics decreased with the growth of pH within the pH range from 5.0 to 10.0, but increased within pH 10.0-13.0. The dissolution kinetics of FeS₂₍am₎ was found to be mainly responsible for the varied Cr(VI) reduction kinetics, and the mechanisms involved in the reduction process were further confirmed by X-ray photoelectron spectroscopy analysis. In addition, O₂ was found to compete with Cr(VI) in the reduction process and subsequently impede the Cr(VI) reduction rate.

Selection and Application of Sulfide Oxidizing Microorganisms Able to Withstand Thiols in Gas Biodesulfurization Systems

After the first commercial applications of a new biological process for the removal of hydrogen sulfide (H₂S) from low pressure biogas, the need arose to broaden the operating window to also enable the removal of organosulfur compounds from high pressure sour gases. In this study we have selected microorganisms from a full-scale biodesulfurization system that are capable of withstanding the presence of thiols. This full-scale unit has been in stable operation for more than 10 years. We investigated the microbial community by using high-throughput sequencing of 16S rRNA gene amplicons which showed that methanethiol gave a competitive advantage to bacteria belonging to the genera Thioalkalibacter (Halothiobacillaceae family) and Alkalilimnicola (Ectothiorhosdospiraceae family). The sulfide-oxidizing potential of the acclimatized population was investigated under elevated thiol loading rates (4.5-9.1 mM d^-1), consisting of a mix of methanethiol, ethanethiol, and propanethiol. With this biomass, it was possible to achieve a stable bioreactor operation at which 80% of the supplied H₂S (61 mM d^-1) was biologically oxidized to elemental sulfur. The remainder was chemically produced thiosulfate. Moreover, we found that a conventionally applied method for controlling the oxygen supply to the bioreactor, that is, by maintaining a redox potential set-point value, appeared to be ineffective in the presence of thiols.

Inhibition of a biological sulfide oxidation under haloalkaline conditions by thiols and diorgano polysulfanes

A novel approach has been developed for the simultaneous description of reaction kinetics to describe the formation of polysulfide and sulfate anions from the biological oxidation of hydrogen sulfide (H2S) using a quick, sulfide-dependent respiration test. Next to H2S, thiols are commonly present in sour gas streams. We investigated the inhibition mode and the corresponding inhibition constants of six thiols and the corresponding diorgano polysulfanes on the biological oxidation of H2S. A linear relationship was found between the calculated IC50 values and the lipophilicity of the inhibitors. Moreover, a mathematical model was proposed to estimate the biomass activity in the absence and presence of sulfurous inhibitors. The biomass used in the respiration tests originated from a full-scale biodesulfurization reactor. A microbial community analysis of this biomass revealed that two groups of microorganism are abundant, viz. Ectothiorhodospiraceae and Piscirickettsiaceae.

Sulfide-oxidizing bacteria establishment in an innovative microaerobic reactor with an internal silicone membrane for sulfur recovery from wastewater

A novel bioreactor, employing a silicone membrane for microaeration, was studied for partial sulfide oxidation to elemental sulfur. The objective of this study was to assess the feasibility of using an internal silicone membrane reactor (ISMR) to treat dissolved sulfide and to characterize its microbial community. The ISMR is an effective system to eliminate sulfide produced in anaerobic reactors. Sulfide removal efficiencies reached 96 % in a combined anaerobic/microaerobic reactor and significant sulfate production did not occur. The oxygen transfer was strongly influenced by air pressure and flow. Pyrosequencing analysis indicated various sulfide-oxidizing bacteria (SOB) affiliated to the species Acidithiobacillus thiooxidans, Sulfuricurvum kujiense and Pseudomonas stutzeri attached to the membrane and also indicated similarity between the biomass deposited on the membrane wall and the biomass drawn from the material support, supported the establishment of SOB in an anaerobic sludge under microaerobic conditions. Furthermore, these results showed that the reactor configuration can develop SOB under microaerobic conditions and can improve and reestablish the sulfide conversion to elemental sulfur.

Influence of methanethiol on biological sulphide oxidation in gas treatment system

Inorganic and organic sulphur compounds such as hydrogen sulphide (H2S) and thiols (RSH) are unwanted components in sour gas streams (e.g. biogas and refinery gases) because of their toxicity, corrosivity and bad smell. Biological treatment processes are often used to remove H2S at small and medium scales (<50 tons per day of H2S). Preliminarily research by our group focused on achieving maximum sulphur production from biological H2S oxidation in the presence of methanethiol. In this paper the underlying principles have been further studied by assessing the effect of methanethiol on the biological conversion of H2S under a wide range of redox conditions covering not only sulphur but also sulphate-producing conditions. Furthermore, our experiments were performed in an integrated system consisting of a gas absorber and a bioreactor in order to assess the effect of methanethiol on the overall gas treatment efficiency. This study shows that methanethiol inhibits the biological oxidation of H2S to sulphate by way of direct suppression of the cytochrome c oxidase activity in biomass, whereas the oxidation of H2S to sulphur was hardly affected. We estimated the kinetic parameters of biological H2S oxidation that can be used to develop a mathematical model to quantitatively describe the biodesulphurization process. Finally, it was found that methanethiol acts as a competitive inhibitor; therefore, its negative effect can be minimized by increasing the enzyme (biomass) concentration and the substrate (sulphide) concentration, which in practice means operating the biodesulphurization systems under low redox conditions.

Polysulfide speciation and reactivity in chromate-contaminated soil

Calcium polysulfide (CPS) has been observed to maintain a reducing capacity for prolonged time periods when used to treat Cr(VI)-contaminated soils. This study utilized bulk and micro-X-ray absorption near edge structure (XANES) spectroscopy to investigate sulfur speciation in soil samples treated with CPS in batch and column studies and to determine the source of the reducing potential. Bulk XANES spectra indicated the presence of two dominant sulfur species: elemental sulfur, which is the product of the sulfide-chromate redox reaction, and thiosulfate (S2O3(2-)). Micro-XANES analyses confirmed these findings and showed that elemental sulfur precipitated as large particles, while thiosulfate was diffused within the soil grains and thus available to react with chromate that leached from slowly dissolving PbCrO4. Micro-X-ray fluorescence (μXRF) analyses indicated a close association of Pb and thiosulfate, so that PbS2O3 is a likely sink for thiosulfate, accounting for up to 20% of the total S added. Sorption of thiosulfate on iron oxides below pH 8 is a second retention mechanism for thiosulfate in the solid. Given that thiosulfate cannot reduce chromate but can reduce solid-bound Fe(III) under neutral pH conditions, it is hypothesized that ferrous iron production is an additional mechanism to maintain reductive conditions in CPS-treated soils.

Elemental sulfur coarsening kinetics

BACKGROUND

Elemental sulfur exists is a variety of forms in natural systems, from dissolved forms (noted as S8(diss) or in water as S8(aq)) to bulk elemental sulfur (most stable as α-S8). Elemental sulfur can form via several biotic and abiotic processes, many beginning with small sulfur oxide or polysulfidic sulfur molecules that coarsen into S8 rings that then coalesce into larger forms: [Formula: see text] Formation of elemental sulfur can be possible via two primary techniques to create an emulsion of liquid sulfur in water called sulfur sols that approximate some mechanisms of possible elemental sulfur formation in natural systems. These techniques produce hydrophobic (S8(Weimarn)) and hydrophilic (S8(polysulfide)) sols that exist as nanoparticle and colloidal suspensions. These sols begin as small sulfur oxide or polysulfidic sulfur molecules, or dissolved S8(aq) forms, but quickly become nanoparticulate and coarsen into micron sized particles via a combination of classical nucleation, aggregation processes, and/or Ostwald ripening.

RESULTS

We conducted a series of experiments to study the rate of elemental sulfur particle coarsening using dynamic light scattering (DLS) analysis under different physical and chemical conditions. Rates of nucleation and initial coarsening occur over seconds to minutes at rates too fast to measure by DLS, with subsequent coarsening of S8(nano) and S8(sol) being strongly temperature dependent, with rates up to 20 times faster at 75°C compared to 20°C. The addition of surfactants (utilizing ionic and nonionic surfactants as model compounds) results in a significant reduction of coarsening rates, in addition to known effects of these molecules on elemental sulfur solubility. DLS and cryo-SEM results suggest coarsening is largely a product of ripening processes rather than particle aggregation, especially at higher temperatures. Fitting of the coarsening rate data to established models for Ostwald ripening additionally support this as a primary mechanism of coarsening.

CONCLUSIONS

Elemental sulfur sols coarsen rapidly at elevated temperatures and experience significant effects on both solubility and particle coarsening kinetics due to interaction with surfactants. Growth of elemental sulfur nanoparticles and sols is largely governed by Ostwald ripening processes.

Pathways of sulfide oxidation by haloalkaliphilic bacteria in limited-oxygen gas lift bioreactors

Physicochemical processes, such as the Lo-cat and Amine-Claus process, are commonly used to remove hydrogen sulfide from hydrocarbon gas streams such as landfill gas, natural gas, and synthesis gas. Biodesulfurization offers environmental advantages, but still requires optimization and more insight in the reaction pathways and kinetics. We carried out experiments with gas lift bioreactors inoculated with haloalkaliphilic sulfide-oxidizing bacteria. At oxygen-limiting levels, that is, below an O(2)/H(2)S mole ratio of 1, sulfide was oxidized to elemental sulfur and sulfate. We propose that the bacteria reduce NAD(+) without direct transfer of electrons to oxygen and that this is most likely the main route for oxidizing sulfide to elemental sulfur which is subsequently oxidized to sulfate in oxygen-limited bioreactors. We call this pathway the limited oxygen route (LOR). Biomass growth under these conditions is significantly lower than at higher oxygen levels. These findings emphasize the importance of accurate process control. This work also identifies a need for studies exploring similar pathways in other sulfide oxidizers such as Thiobacillus bacteria.

Generation of DNA-damaging reactive oxygen species via the autoxidation of hydrogen sulfide under physiologically relevant conditions: chemistry relevant to both the genotoxic and cell signaling properties of H(2)S

Hydrogen sulfide (H(2)S) has long been known for its toxic properties; however, in recent years, evidence has emerged that this small, gaseous molecule may serve as an endogenous cell-signaling agent. Though perhaps surprising in light of its potential role as an endogenous signaling agent, a number of studies have provided evidence that H(2)S is a DNA-damaging mutagen. In the work reported here, the chemical mechanisms of DNA damage by H(2)S were examined. Using a plasmid-based DNA strand cleavage assay, we found that micromolar concentrations of H(2)S generated single-strand DNA cleavage. Mechanistic studies indicate that this process involved autoxidation of H(2)S to generate superoxide, hydrogen peroxide, and, ultimately, the well-known DNA-damaging agent hydroxyl radical via a trace metal-mediated Fenton-type reaction. Strand cleavage by H(2)S proceeded in the presence of physiological thiol concentrations, and the known byproducts of H(2)S oxidation such as thiosulfate, sulfite, and sulfate do not contribute to the strand cleavage process. However, initially generated oxidation products such as persulfide (S(2)(2-)) likely undergo rapid autoxidation reactions that contribute to the generation of superoxide. The potential relevance of autoxidation processes to the genotoxic and cell signaling properties of H(2)S is discussed.

Deletion strains reveal metabolic roles for key elemental sulfur-responsive proteins in Pyrococcus furiosus

Transcriptional and enzymatic analyses of Pyrococcus furiosus previously indicated that three proteins play key roles in the metabolism of elemental sulfur (S(0)): a membrane-bound oxidoreductase complex (MBX), a cytoplasmic coenzyme A-dependent NADPH sulfur oxidoreductase (NSR), and sulfur-induced protein A (SipA). Deletion strains, referred to as MBX1, NSR1, and SIP1, respectively, have now been constructed by homologous recombination utilizing the uracil auxotrophic COM1 parent strain (ΔpyrF). The growth of all three mutants on maltose was comparable without S(0), but in its presence, the growth of MBX1 was greatly impaired while the growth of NSR1 and SIP1 was largely unaffected. In the presence of S(0), MBX1 produced little, if any, sulfide but much more acetate (per unit of protein) than the parent strain, demonstrating that MBX plays a critical role in S(0) reduction and energy conservation. In contrast, comparable amounts of sulfide and acetate were produced by NSR1 and the parent strain, indicating that NSR is not essential for energy conservation during S(0) reduction. Differences in transcriptional responses to S(0) in NSR1 suggest that two sulfide dehydrogenase isoenzymes provide a compensatory NADPH-dependent S(0) reduction system. Genes controlled by the S(0)-responsive regulator SurR were not as highly regulated in MBX1 and NSR1. SIP1 produced the same amount of acetate but more sulfide than the parent strain. That SipA is not essential for growth on S(0) indicates that it is not required for detoxification of metal sulfides, as previously suggested. A model is proposed for S(0) reduction by P. furiosus with roles for MBX and NSR in bioenergetics and for SipA in iron-sulfur metabolism.

A kinetic study of Cr(VI) reduction by calcium polysulfide

The goal of this study was to determine the influence of pH and oxygen conditions on the reaction kinetics of hexavalent chromium (Cr(VI)) with calcium polysulfide (CPS). The observed kinetic reaction rate, k(obs), between Cr(VI) and CPS was evaluated for the pH range 5.5-8.5, aerobic open, aerobic closed and anaerobic conditions, and two Cr(VI) species (aqueous and adsorbed on goethite). The kinetic model followed a second-order reaction rate, unlike the first-order reaction rate of the Cr(VI)-sulfide reaction. k(obs) increased exponentially with pH in the range of 8.5 to 5.5 under anaerobic conditions, while under aerobic conditions k(obs) had a maximum at pH 7. Qualitative sulfur analyses showed that thiosulfates were present at and above pH 7 in the aerobic experiments, which can also reduce Cr(VI). Similarly, pure CPS in the presence of oxygen yielded sulfides and thiosulfates, while sulfide converted to a mixture of sulfite, thiosulfates, sulfites and sulfates. CPS is thus likely to have a longer residence time and greater reducing capacity in the subsurface compared to sulfide at neutral and basic pH environments.

SurR regulates hydrogen production in Pyrococcus furiosus by a sulfur-dependent redox switch

We present structural and biochemical evidence for a redox switch in the archaeal transcriptional regulator SurR of Pyrococcus furiosus, a hyperthermophilic anaerobe. P. furiosus produces H(2) during fermentation, but undergoes a metabolic shift to produce H(2) S when elemental sulfur (S(0) ) becomes available. Changes in gene expression occur within minutes of S(0) addition, and the majority of these S(0) -responsive genes are regulatory targets of SurR, a key regulator involved in primary S(0) response. SurR was shown in vitro to have dual functionality, activating transcription of some of these genes, notably the hydrogenase operons, and repressing others, including a gene-encoding sulfur reductase. This work demonstrates via biochemical and structural evidence that the activity of SurR is modulated by cysteine residues in a CxxC motif that constitutes a redox switch. Oxidation of the switch with S(0) inhibits sequence-specific DNA binding by SurR, leading to deactivation of genes related to H(2) production and derepression of genes involved in S(0) metabolism.

Modeling of hydrogen sulfide oxidation in concrete corrosion products from sewer pipes

Abiotic and biotic oxidation of hydrogen sulfide related to concrete corrosion was studied in corrosion products originating from a sewer manhole. The concrete corrosion products were suspended in an acidic solution, mimicking the conditions in the pore water of corroded concrete. The removal of hydrogen sulfide and dissolved oxygen was measured in parallel in the suspension, upon which the suspension was sterilized and the measurement repeated. The results revealed the biotic oxidation to be fast compared with the abiotic oxidation. The stoichiometry of the hydrogen sulfide oxidation was evaluated using the ratio between oxygen and hydrogen sulfide uptake. The ratio for the biotic oxidation pointed in the direction of elemental sulfur being formed as an intermediate in the oxidation of hydrogen sulfide to sulfuric acid. The experimental results were applied to suggest a hypothesis and a mathematical model describing the hydrogen sulfide oxidation pathway in a matrix of corroded concrete.