Adsorption of cellular peptides of Microcystis aeruginosa and two herbicides onto activated carbon: effect of surface charge and interactions

Role of low-proportion, hydrophobic dissolved organic matter components in inhibiting methylmercury uptake by phytoplankton

Uptake of methylmercury (MeHg), a potent neurotoxin, by phytoplankton is a major concern due to its role as the primary pathway for MeHg entry into aquatic food webs, thereby posing a significant risk to human health. While it is widely believed that the MeHg uptake by plankton is negatively correlated with the concentrations of dissolved organic matter (DOM) in the water, ongoing debates continue regarding the specific components of DOM that exerts the dominant influence on this process. In this study, we employed a widely-used resin fractionation approach to separate and classify DOM derived from algae (AOM) and natural rivers (NOM) into distinct components: strongly hydrophobic, weakly hydrophobic, and hydrophilic fractions. We conduct a comparative analysis of different DOM components using a combination of spectroscopy and mass spectrometry techniques, aiming to identify their impact on MeHg uptake by Microcystis elabens, a prevalent alga in freshwater environments. We found that the hydrophobic components had exhibited more pronounced spectral characteristics associated with the protein structures while protein-like compounds between hydrophobic and hydrophilic components displayed significant variations in both distributions and the values of m/z (mass-to-charge ratio) of the molecules. Regardless of DOM sources, the low-proportion hydrophobic components usually dominated inhibition of MeHg uptake by Microcystis elabens. Results inferred from the correlation analysis suggest that the uptake of MeHg by the phytoplankton was most strongly and negatively correlated with the presence of protein-like components. Our findings underscore the importance of considering the diverse impacts of different DOM fractions on inhibition of phytoplankton MeHg uptake. This information should be considered in future assessments and modeling endeavors aimed at understanding and predicting risks associated with aquatic Hg contamination.

A Pitaya-Inspired Modular Cylindrical MOF-Based Capsule Design for Pesticide Signal Probes

Excessive use of pesticides has brought about serious environmental risks worldwide that pose significant harm for human health. Herein, a series of metal-organic framework (MOF)-based gel capsules with a pitaya-like core-shell structure are constructed through a green polymerization strategy for pesticide detection and removal, namely ZIF-8/M-dbia/SA (M = Zn, Cd). Significantly, the ZIF-8/Zn-dbia/SA capsule exhibits sensitive detection of alachlor, a representative pre-emergence acetanilide pesticide, with a satisfactory detection limit of 0.23 μM. In addition, the MOF-based gel capsules can be extended to a universal visual platform for the noninvasive detection of pesticide residues with various MOFs, such as Eu-MOF, Tb-MOF, and Cu-MOF, and participating dye. Similar to pitaya, the ordered porous structure of MOF in ZIF-8/Zn-dbia/SA capsules offers cavity and open sites for removing pesticide from water with the maximum adsorption amount q_max of 61.1 mg·g^-1 toward alachlor in a Langmuir model. Thereby, this work presents the universality of gel capsule self-assembly technologies, including the well-preserved visible fluorescence area and porosity of the different structurally diverse MOFs, offering an ideal strategy for water decontamination and food safety control fields.

Adsorbents Used for Microcystin Removal from Water Sources: Current Knowledge and Future Prospects

The increasing occurrence of toxic cyanobacteria in water sources, driven by climate change and eutrophication, is of great concern worldwide today. Cyanobacterial blooms can negatively affect water bodies and generate harmful secondary metabolites, namely microcystins (MCs), which significantly impair water quality. Various adsorbents used for MC removal from water sources were assessed in this investigation. Activated carbon constitutes the most widely used adsorbent for treating contaminated waters due to its high affinity for adsorbing MCs. Alternative adsorbents have also been proposed and reported to provide higher efficiency, but the studies carried out so far in this regard are still insufficient. The mechanisms implicated in MC adsorption upon different adsorbents should be further detailed for a better optimization of the adsorption process. Certainly, adsorbent characteristics, water pH and temperature are the main factors influencing the adsorption of MCs. In this context, optimization studies must be performed considering the effectiveness, economic aspects associated with each adsorbent. This review provides guidelines for more practical field applications of the adsorption in the treatment of waters actually contaminated with MCs.

Characteristics of extracellular organic matters and the formation potential of disinfection by-products during the growth phases of M. aeruginosa and Synedra sp

Extracellular organic matter (EOM) is an important precursor of disinfection by-products (DBPs). Nowadays, little is known about changes in molecular weight (MW) and hydrophilic (HPI)/hydrophobic (HPO) fractions of EOM during the entire algal growth phase. In this study, a combined approach of fractionation procedure and parallel factor (PARAFAC) analysis was applied to characterize the EOM during the entire growth phase of two algal species (M. aeruginosa and Synedra sp.), and investigated the relationships between fluorescent component and the DBP formation potential (FP) in MW and HPI/HPO fractions. Thereinto, three components (including one protein-like component (C1), one humic-like component (C2), and one fulvic acid-like component (C3)) were identified by the PARAFAC model. For two algae, the HPI and high MW (> 100 kDa) fractions were both the main components of algal EOM in the three growth phases in terms of the dissolved organic carbon. The high MW fraction had more C1 compared with other MW fractions, especially for M. aeruginosa. Besides, the formation risk of EOM-derived DBPs from M. aeruginosa was lower than that from Synedra sp. The result of this study showed the FP of DBPs varied with fluorescent components of algal EOM fractions and also indicated that the humic-like substances were tended to form trichloromethane and the tryptophan-like substances were associated with dichloroacetic acid by canonical correspondence analysis for both two algae.

Adsorption isotherms and kinetics for the removal of algal organic matter by granular activated carbon

Seasonal algal blooms in surface water release a significant amount of algal organic matter (AOM), which alters the composition of dissolved organic matter (DOM). AOM affects the drinking water treatment processes and finished water quality. In this study, the relative removal efficiency of AOM and humic acid by granular activated carbon (GAC) adsorption was determined. Batch experiments were conducted to evaluate the adsorption capacity of GAC, which varied from 4.235-31.45 mg/g for AOM originated from different algae. Freundlich isotherm models fitted the adsorption equilibrium data, and the adsorption kinetics data were fitted well using a pseudo-second order kinetic model. The calculated thermodynamics parameters (∆G⁰, ∆H⁰ and ∆S⁰) indicated that GAC adsorption for DOM removal was endothermic and spontaneous in nature.

Current knowledge in the field of algal organic matter adsorption onto activated carbon in drinking water treatment

The increasing occurrence of algal and cyanobacterial blooms and the related formation of algal organic matter (AOM) is a worldwide issue that endangers the quality of freshwater sources and affects water treatment processes. The associated problems involve the production of toxins or taste and odor compounds, increasing coagulant demand, inhibition of removal of other polluting compounds, and in many cases, AOM acts as a precursor of disinfection by-products. Previous research has shown that for sufficient AOM removal, the conventional drinking water treatment based on coagulation/flocculation must be often accompanied by additional polishing technologies such as adsorption onto activated carbon (AC). This state-of-the-art review is intended to serve as a summary of the most current research on the adsorption of AOM onto AC concerning drinking water treatment. It summarizes emerging trends in this field with an emphasis on the type of AOM compounds removed and on the adsorption mechanisms and influencing factors involved. Additionally, also the principles of competitive adsorption of AOM and other organic pollutants are elaborated. Further, this paper also synthesizes previous knowledge on combining AC adsorption with other treatment techniques for enhanced AOM removal in order to provide a practical resource for researchers, water treatment plant operators and engineers. Finally, research gaps regarding the AOM adsorption onto AC are identified, including, e.g., adsorption of AOM residuals recalcitrant to coagulation/flocculation, suitability of pre-oxidation of AOM prior to the AC adsorption, relationships between the solution properties and AOM adsorption behaviour, or AOM as a cause of competitive adsorption. Also, focus should be laid on continuous flow column experiments using water with multi-component composition, because these would greatly contribute to transferring the theoretical knowledge to practice.

Effects of NaOH Activation on Adsorptive Removal of Herbicides by Biochars Prepared from Ground Coffee Residues

In this study, the adsorption of herbicides using ground coffee residue biochars without (GCRB) and with NaOH activation (GCRB-N) was compared to provide deeper insights into their adsorption behaviors and mechanisms. The physicochemical characteristics of GCRB and GCRB-N were analyzed using Brunauer–Emmett–Teller surface area, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction and the effects of pH, temperature, ionic strength, and humic acids on the adsorption of herbicides were identified. Moreover, the adsorption kinetics and isotherms were studied. The specific surface area and total pore volume of GCRB-N (405.33 m2/g and 0.293 cm3/g) were greater than those of GCRB (3.83 m2/g and 0.014 cm3/g). The GCBR-N could more effectively remove the herbicides (Qe,exp of Alachlor = 122.71 μmol/g, Qe,exp of Diuron = 166.42 μmol/g, and Qe,exp of Simazine = 99.16 μmol/g) than GCRB (Qe,exp of Alachlor = 11.74 μmol/g, Qe,exp of Diuron = 9.95 μmol/g, and Qe,exp of Simazine = 6.53 μmol/g). These results suggested that chemical activation with NaOH might be a promising option to make the GCRB more practical and effective for removing herbicides in the aqueous solutions.

The Use of Biochar and Pyrolysed Materials to Improve Water Quality through Microcystin Sorption Separation

Harmful algal blooms have increased globally with warming of aquatic environments and increased eutrophication. Proliferation of cyanobacteria (blue-green algae) and the subsequent flux of toxic extracellular microcystins present threats to public and ecosystem health and challenges for remediation and management. Although methods exist, there is currently a need for more environmentally friendly and economically and technologically feasible sorbents. Biochar has been proposed in this regard because of its high porosity, chemical stability, and notable sorption efficiency for removing of cyanotoxins. In light of worsening cyanobacterial blooms and recent research advances, this review provides a timely assessment of microcystin removal strategies focusing on the most pertinent chemical and physical sorbent properties responsible for effective removal of various pollutants from wastewater, liquid wastes, and aqueous solutions. The pyrolysis process is then evaluated for the first time as a method for sorbent production for microcystin removal, considering the suitability and sorption efficiencies of pyrolysed materials and biochar. Inefficiencies and high costs of conventional methods can be avoided through the use of pyrolysis. The significant potential of biochar for microcystin removal is determined by feedstock type, pyrolysis conditions, and the physiochemical properties produced. This review informs future research and development of pyrolysed materials for the treatment of microcystin contaminated aquatic environments.

Graphene, electrospun membranes and granular activated carbon for eliminating heavy metals, pesticides and bacteria in water and wastewater treatment processes

The availability of safe water has a significant impact on all parts of society, its growth and sustainability, both politically and socioeconomically.

The enhanced reduction of C- and N-DBP formation in treatment of source water containing Microcystis aeruginosa using a novel CTSAC composite coagulant

This study investigated the effect of a chitosan-aluminium chloride (CTSAC) composite coagulation process on reducing the formation of algal organic matters (AOM) related carbonaceous disinfection by-products (C-DBPs) and nitrogenous disinfection by-products (N-DBPs), by removing or adsorbing their precursors. Compared with aluminium chloride (AC) and chitosan (CTS) alone, CTSAC significantly enhanced the removal of dissolved organic matter (DOC), polysaccharide, protein and humic acids, attaining removals of 64.95%, 80.78%, 70.85% and 44.50%, respectively. Notably, the three-dimensional excitation and emission matrix (3D-EEM) combined with molecular weight (MW) fractionation analysis revealed that CTSAC was not only effective for removing high-MW AOM, but also for the low-MW fractions that are important in forming DBPs. In addition, the CTSAC coagulation was proven to enhance the removal of aromatic polypeptide/amino acid-like materials and aliphatic amines, which have high N-nitrosodimethylamine formation potential. Efficient AOM removal by the CTSAC coagulation resulted in significant reduction of both AOM-related C-DBPs (63.54%) and N-DBPs (71%), while AC coagulation did not substantially reduce the formation of tribromomethane, 1,1,1-trichloropropanone or N-nitrosodimethylamine, and CTS coagulation alone did not achieve any obvious reduction in trichloronitromethane. Fourier transform infrared (FT-IR) spectroscopy analysis confirmed the interaction of CTS and AC in the CTSAC composite coagulation, which contributed to the improved AOM removal performance of CTSAC, and, in this case, reduced the formation of C- and N-DBPs.

Adsorption of emerging pollutants on activated carbon

Many emerging pollutants (also known as micro-pollutants) including pesticides, pharmaceutical and personal care products (PPCPs), and endocrine disrupting chemicals (EDCs) have frequently been detected in surface, ground, and drinking water at alarming concentrations. The emission and accumulation of these anthropogenic chemicals in nature is a potential threat to human health and aquatic environment. Therefore, it is essential to devise an effective and feasible technology to remove the micro-pollutants from water. Activated carbon adsorption has been introduced and utilized as a promising treatment to reduce the concentration of the emerging pollutants in water. A summary of research on the removal of pesticides, PPCPs, and EDCs by activated carbon adsorption process is presented in this report. The effects of carbon characteristics, adsorptive properties, and environmental factors on the adsorption capacity of activated carbon are reviewed. In addition, the mechanisms of the adsorption including hydrophobicity and the nature of the functional groups of activated carbon and organic compounds are discussed. Furthermore, the applied equilibrium adsorption isotherms (Langmuir, Freundlich, BET, Sips, Dubinin-Astakhov, Dubinin-Radushkevich, and Toth) and the most common kinetic models (pseudo-first- and second-order models, film and intra-particle diffusion models, and adsorption-desorption model) are also included for further investigation. This comprehensive review report aims to identify the knowledge deficiencies regarding emerging pollutant treatment via activated carbon adsorption process and open new horizons for the future research on the adsorption of emerging pollutants on activated carbon.

Characteristics of C-, N-DBPs formation from algal organic matter: role of molecular weight fractions and impacts of pre-ozonation

Extracellular organic matter (EOM) and intracellular organic matter (IOM) of Microcystis aeruginosa have been reported to contribute to the formation of carbonaceous disinfection by-products (C-DBPs) and nitrogenous disinfection by-products (N-DBPs). Little is known about DBPs formation from different molecular weight (MW) fractions, especially for N-nitrosodimethylamine (NDMA). This study fractionated EOM and IOM into several MW fractions using a series of ultrafiltration membranes and is the first to report on the C-DBPs and N-DBPs formation from chlorination and chloramination of different MW fractions. Results showed that EOM and IOM were mainly distributed in low-MW (<1 KDa) and high-MW (>100 KDa) fractions. Additionally, the low-MW and high-MW fractions of EOM and IOM generally took an important part in forming C-DBPs and N-DBPs, either in chlorination or in chloramination. Furthermore, the effects of pre-ozonation on the formation of DBPs in subsequent chlorination and chloramination were also investigated. It was found that ozone shifted the high-MW fractions of EOM and IOM into lower MW fractions and increased the C-DBPs and N-DBPs yields to different degrees. As low-MW fractions are more difficult to remove than high-MW fractions by conventional treatment processes, therefore, activated carbon adsorption, nanofiltration (NF) and biological treatment processes can be ideal to remove the low-MW fractions and minimize the formation potential of C-DBPs and N-DBPs. Moreover, the use of ozone should be carefully considered in the treatment of algal-rich water.

Triazines removal by selective polymeric adsorbent

The objective of the study was to investigate sorption of simazine, atrazine, propazine and terbuthylazine on specific polymeric adsorbent and thereby evaluate the possibility of triazine-based herbicide removal from the aqueous solution. In order to obtain polymer adsorbent for triazines removal, the poly(divinylbenzene) was synthesized in radical polymerization using bead polymerization, and modified with maleic anhydride in Diels–Alder reaction with subsequent base hydrolysis. The porous material containing carboxyl groups was obtained. Experiments have been performed in single and multi-component mixtures of herbicide in the ppm concentration range. Introduction of carboxyl groups into polymer structure resulted in obtaining specific interactions, such as hydrogen bonds between modified poly(divinylbenzene) and triazines, therefore intensification of adsorption was observed. Calculated distribution coefficients of triazines (K = 2600–35 100) testify to their effective removal from aqueous solutions on the studied adsorbent. Selective sorption of triazines is observed and explained in relation to the binding mechanism which involve hydrophobic interactions and hydrogen bonding. The effect of the adsorbate structure on the ability to form specific interactions with the tested adsorbent was investigated. The kinetic of sorption and the parameters of Langmuir and Freundlich isotherms for the studied systems were determined.

A comparison of the character of algal extracellular versus cellular organic matter produced by cyanobacterium, diatom and green alga

This study investigated characteristics of algal organic matter (AOM) derived from three species (cyanobacterium Microcystis aeruginosa, diatom Fragilaria crotonensis and green alga Chlamydomonas geitleri) which dominate phytoplanktonic populations in reservoirs supplying drinking water treatment plants. Algal growth was monitored by cell counting, optical density and dissolved organic carbon concentration measurements. Extracellular organic matter (EOM) released at exponential and stationary growth phases and cellular organic matter (COM) were characterised in terms of specific UV absorbance (SUVA), peptide/protein and non-peptide content, hydrophobicity and molecular weight (MW). It was found that both EOM and COM were predominantly hydrophilic with low SUVA. COM was richer in peptides/proteins, more hydrophilic (with about 89% of hydrophilic fraction for all three species) and had lower SUVA than EOM. MW fractionation showed that both EOM and COM of all three species contain large portions of low-MW (<1 kDa) compounds and high-MW (>100 kDa) polysaccharides. Peptides/proteins exhibited narrower MW distribution than non-peptide fraction and it widened as the cultures grew. The highest amount of peptides/proteins with a significant portion of high-MW ones (22%) was observed in COM of M. aeruginosa. The results imply that the knowledge of AOM composition and characteristics predetermine which processes would be effective in the treatment of AOM laden water.

Isolation and characterization of dissolved organic matter fractions from antialgal products of Microcystis aeruginosa

An antialgal bacterium, Streptomyces sp. HJC-D1, was applied for the biodegradation of cyanobacterium Microcystis aeruginosa, and the isolation and characterization of dissolved organic matter (DOM) fractions in antialgal products were studied. Results showed the the growth of M. aeruginosa was significantly inhibited by the cell-free filtrate of Streptomyces sp. HJC-D1 with the growth inhibition of 86 ± 7 %. The antialgal products were divided using resin adsorbents into the hydrophilic fraction (HPI), hydrophobic acid (HPO-A), transphilic acid (TPI-A), hydrophobic neutral and transphilic neutral, and then the five fractions were analyzed by the 3-D fluorescence spectroscopy, gel permeation chromatography, and Fourier transform infrared spectroscopy. The results indicated that the HPI component was the most abundant DOM fraction in the antialgal products, and its concentration was increased with the increase of cell-free filtrate concentration. The fluorescence peak location and intensity analysis showed that the protein-, fulvic-, and humic-like substances were dominant in the HPI, HPO-A, and TPI-A fractions, and intensities of the relevant fluorescence peaks were stronger in the experimental groups than those of the control groups. It was also found that the number-average molecular weight of DOM fractions ranged from 245 to 1,452 g mol(-1), and thereinto organic acids such as HPO-A and TPI-A exhibited lower molecular weights.

Physiological responses of Microcystis aeruginosa under the stress of antialgal actinomycetes

Eutrophication has occurred frequently in various lakes and reservoirs, and the metabolic excretion produced during the algae growth causes serious water pollution and threatens ecological security. Biological control approaches such as screening bacteria with the capability to degrade cyanobacteria are an environment-friendly way. An isolated antialgal strain Streptomyces sp. KY-34, was applied to degrade the cyanobacterium Microcystis aeruginosa, and the possible biodegradation mechanism was investigated. The results showed that the fermentation liquor of Streptomyces sp. KY-34 could inhibit the growth of M. aeruginosa by restrained the synthesis of chlorophyll and photosynthetic pigments, and decreasing the contents of cellular protein and non-protein, accordingly led to the increase of malondialdehyde content, and the activities of superoxide dismutase, catalase and peroxidase in algae cells. In addition, the variation of the cellular ultrastructure indicated a serious change in algal physiology. It's revealed that the biodegradation mechanism of M. aeruginosa should primarily be that Streptomyces sp. KY-34 caused the damage of algae cell membrane and led to the increases of antioxidant enzymes, and then the growth of M. aeruginosawas inhibited.

Spatial and thematic distribution of research on cyanotoxins

Cyanobacteria in surface water are well known for their ability to form toxic blooms responsible for animal mortality and human poisoning. Accompanying major progress in science and technology, the state of knowledge of cyanotoxins has dramatically increased over the last two decades. The bibliometric approach applied in this study shows the evolution of research and identifies major gaps to be filled by future work. Although the publication rate has gradually increased from one hundred to three hundred articles per year since the 1990s, half of the literature available focuses on microcystins and another quarter on saxitoxins. Other cyanotoxins such as beta-N-methylamino-l-alanine or cylindrospermopsin remain vastly disregarded. Moreover, most of the publications deal with toxicity and ecology while other research areas, such as environmental and public health, require additional investigation. The analysis of the literature highlights the main journals for the communication of knowledge on cyanotoxins but also reveals that 90% of the research is originated from only ten countries. These countries are also those with the highest H-index and average number of citation per article. Nonetheless, the ranking of these countries is significantly altered when the amount of publications is normalized based on the population, the number of universities, the national gross domestic product or the government revenue. However, the lower amount of publications from Eastern Europe, Africa and South America could also reflect the lack of monitoring campaigns in these regions. This lack could potentially lead to the underestimation of the prevalence of toxic cyanobacterial blooms and the diversity of toxins worldwide.

Microcystins in potable surface waters: toxic effects and removal strategies

In freshwater, harmful cyanobacterial blooms threaten to increase with global climate change and eutrophication of surface waters. In addition to the burden and necessity of removal of algal material during water treatment processes, bloom-forming cyanobacteria can produce a class of remarkably stable toxins, microcystins, difficult to remove from drinking water sources. A number of animal intoxications over the past 20 years have served as sentinels for widespread risk presented by microcystins. Cyanobacterial blooms have the potential to threaten severely both public health and the regional economy of affected communities, particularly those with limited infrastructure or resources. Our main objectives were to assess whether existing water treatment infrastructure provides sufficient protection against microcystin exposure, identify available options feasible to implement in resource-limited communities in bloom scenarios and to identify strategies for improved solutions. Finally, interventions at the watershed level aimed at bloom prevention and risk reduction for entry into potable water sources were outlined. We evaluated primary studies, reviews and reports for treatment options for microcystins in surface waters, potable water sources and treatment plants. Because of the difficulty of removal of microcystins, prevention is ideal; once in the public water supply, the coarse removal of cyanobacterial cells combined with secondary carbon filtration of dissolved toxins currently provides the greatest potential for protection of public health. Options for point of use filtration must be optimized to provide affordable and adequate protection for affected communities.

Coagulation of peptides and proteins produced by Microcystis aeruginosa: Interaction mechanisms and the effect of Fe-peptide/protein complexes formation

This paper focuses on elucidation of the mechanisms involved in the coagulation of peptides and proteins contained in cellular organic matter (COM) of cyanobacterium Microcystis aeruginosa by ferric coagulant. Furthermore, coagulation inhibition due to the formation of Fe-peptide/protein surface complexes was evaluated. The results of coagulation testing imply that removability of peptides and proteins is highly dependent on pH value which determines charge characteristics of coagulation system compounds and therefore the mechanisms of interactions between them. The highest peptide/protein removal was obtained in the pH range of 4-6 owing to charge neutralization of peptide/protein negative surface by positively charged hydrolysis products of ferric coagulant. At low COM/Fe ratio (COM/Fe <0.33), adsorption of peptides/proteins onto ferric oxide-hydroxide particles, described as electrostatic patch model, enables the coagulation at pH 6-8. On the contrary, steric stabilization reduces coagulation at pH 6-8 if the ratio COM/Fe is high (COM/Fe >0.33). Coagulation of peptides and proteins is disturbed at pH 6-7 as a consequence of Fe-peptide/protein complexes formation. The maximum ability of peptides/proteins to form soluble complexes with Fe was found just at pH 6, when peptides/proteins bind 1.38 mmol Fe per 1 g of peptide/protein DOC. Complex forming peptides and proteins of relative molecular weights of 1, 2.8, 6, 8, 8.5, 10 and 52 kDa were isolated by affinity chromatography.