Electricity generation and microbial community in response to short-term changes in stack connection of self-stacked submersible microbial fuel cell powered by glycerol

Prevalence of Escherichia coli in electrogenic biofilm on activated carbon in microbial fuel cell

For a better understanding of the distribution of depth-dependent electrochemically active bacteria at in the anode zone, a customized system in a microbial fuel cell (MFC) packed with granular activated carbon (GAC) was developed and subsequently optimized via electrochemical tests. The constructed MFC system was sequentially operated using two types of matrice solutions: artificially controlled compositions (i.e., artificial wastewater, AW) and solutions obtained directly from actual sewage-treating municipal plants (i.e., municipal wastewater, MW). Notably, significant difference(s) of system efficiencies between AW or MW matrices were observed via performance tests, in that the electricity production capacity under MW matrices is < 25% that of the AW matrices. Interestingly, species of Escherichia coli (E. coli) sampled from the GAC bed (P1: deeper region in GAC bed, P2: shallow region of GAC near electrolytes) exhibited an average relative abundance of 75 to 90% in AW and a relative abundance of approximately 10% in MW, while a lower relative abundance of E. coli was found in both the AW and MW anolyte samples (L). Moreover, similar bacterial communities were identified in samples P1 and P2 for both the AW and MW solutions, indicating a comparable distribution of bacterial communities over the anode area. These results provide new insights into E. coli contribution in power production for the GAC-packed MFC systems (i.e., despite the low contents of Geobacter (> 8%) and Shewanella (> 1%)) for future applications in sustainable energy research. KEY POINTS: • A microbial community analysis for depth-dependence in biofilm was developed. • The system was operated with two matrices; electrochemical performance was assessed. • E. coli spp. was distinctly found in anode zone layers composed of activated carbon.

Construction of double tube granular sludge microbial fuel cell and its characteristics and mechanism of azo dye degradation

Microbial fuel cells (MFCs) can obtain electrical energy from extensive organic matter and complete wastewater treatment at the same time. The principal purpose of the research is to find a solution to the biodegradation of X-3B in a double tube MFC with graphite fiber brush as the anode and carbon cloth as the cathode. The anaerobic, aerobic, and electrochemical processes in the MFC were investigated. The effects of dye concentration and circuit connectivity on the performances of MFCs were explored. The degradation efficiency of X-3B in the anode region (85.56%) was higher than that in the cathode region (14.16%) within 24 h under the optimal voltage of 0.43 V, indicating a synergistic effect between electrode reaction and biodegradation. The power density increased from 12.12 mW/m³ to 60.45 mW/m³ with the addition of X-3B from 50 to 200 mg/L, because of the reduced ohmic and polarization resistance. Intermediate productions such as aniline were manufactured with the conjugated double bond of X-3B broken, and the intermediates were degraded into small molecular products like phenol during further degradation processes. Moreover, dye concentration and circuit connection had significant effects on the relative abundance of the microbial community at phylum and genus levels. In general, MFC is a good approach to energy generation and azo dye treatment at the same time.

Limitation of voltage reversal in the degradation of azo dye by a stacked double-anode microbial fuel cell and characterization of the microbial community structure

In this study, two double-anode microbial fuel cells (MFCs) were connected in series for degradation of the azo dye reactive brilliant red X-3B. After the series connection, the electricity generation of one of the MFCs decreased, and the other was not affected too much. Due to the special structure in the double-anode MFC reduced the imbalanced performance between the MFC units, the occurrence of voltage reversal was limited. The removal efficiencies in two MFC reactors were not consistent after the series connection, the results showed that the MFC with the reduced electricity generation had the higher removal efficiencies, it was 12.90, 11.66, and 40.05% higher than in the MFC in which the power generation capacity was not affected after the series connection, the MFC without serial connection, and the control group, respectively. Meanwhile, the microbial communities related to the degradation of refractory organic compounds increased and related to electricity generation decreased in the MFC with the reduced electricity generation, the changes of the microbial communities were consistent with its electricity generation and the removal efficiencies. The degradation products in the effluent from two MFC units showed that had the products generated from the MFC with the reduced electricity generation had simpler structures comparing the other MFC unit.

Treatment of mixed dairy and dye wastewater in anode of microbial fuel cell with simultaneous electricity generation

Microbial fuel cell (MFC) is a green technology that converts the stored chemical energy of organic matter to electricity; therefore, it can be used for wastewater purification and energy production simultaneously. In this study, three kinds of dairy products, including milk, cheese water, and yogurt water, were mixed with Acid orange 7 (AO7) as the model wastewater and used as the anolyte of an MFC. The capability of the system in energy production and dye removal was also investigated. The FESEM images were used to investigate the biofilms attachment to the anodes. Moreover, the polarization curves, electrochemical impedance spectroscopy, cyclic voltammetry (CV), voltage-time profiles, and coulombic efficiency were used to evaluate the electrochemical activity of the MFCs. Based on the CV results, the biofilm formation significantly improved the electrochemical activity of the electrodes. Maximum power density, voltage, and coulombic efficiency were obtained as 44.05 mW.m^-2, 332.4 mV, and 1.76%, respectively, for cheese water + AO7 anolyte, but the milk + AO7 MFC produced a stable voltage for a long time and its performance was similar to the cheese water + AO7 anolyte. Maximum COD removal and decolorization efficiencies were obtained equal to 84.57 and 92.18% for yogurt water + AO7 and cheese water + AO7 anolytes, respectively.

Operation mechanism of constructed wetland-microbial fuel cells for wastewater treatment and electricity generation: A review

Constructed wetland-microbial fuel cells (CWL-MFCs) are eco-friendly and sustainable technology, simultaneously implementing contaminant removal and electricity production. According to intensive research over the last five years, this review on the operation mechanism was conducted for in-depth understanding and application guidance of CWL-MFCs. The electrochemical mechanism based on anodic oxidation and cathodic reduction is the core for improved treatment in CWL-MFCs compared to CWLs. As the dominant bacterial community, the abundance and gene-expression patterns of electro-active bacteria responds to electrode potentials and contaminant loadings, further affecting operational efficiency of CWL-MFCs. Plants benefit COD and N removal by supplying oxygen for aerobic degradation and rhizosphere secretions for microorganisms. Multi-electrode configuration, carbon-based electrodes and rich porous substrates affect transfer resistance and bacterial communities. The possibilities of CWL-MFCs targeting at recalcitrant contaminants like flame retardants and interchain interactions among effect components need systematic research.

Exoelectrogenic Anaerobic Granular Sludge for Simultaneous Electricity Generation and Wastewater Treatment

A thick and electroactive biofilm is the key to the successful development of microbial electrochemical systems and technologies (METs). In this study, intact anaerobic granular sludge (AGS), which is a spherical and dense microbial association, was successfully demonstrated as a novel and efficient biocatalyst in METs such as microbial fuel cells. Three different strategies were explored to shift the microbial composition of AGS from methanogenic to exoelectrogenic microbes, including varying the external resistance and organic loading and manipulating the anode potential. Among all the strategies, only with positive anode potential, AGS was successfully shifted from methanogenic to exoelectrogenic conditions, as indicated by the significantly high current response (10.32 A/m²) and 100% removal of organic carbon from wastewater. Moreover, the AGS bioanode showed no significant decrease in current generation and organic removal at pH 5, indicating good tolerance of AGS to acidic conditions. Finally, 16S rRNA sequencing revealed the enrichment of exoelectrogens and inhibition of methanogens in the microbial community of AGS after anode potential control. This study provides a proof of concept for extracting electrical energy from organic wastes by exoelectrogenic AGS along with simultaneous wastewater treatment and meanwhile opens up a new paradigm to create an efficient and cost-effective exoelectrogenic biocatalyst for boosting the industrial application of METs.

Zinc: A promising material for electrocatalyst-assisted microbial electrosynthesis of carboxylic acids from carbon dioxide

Microbial electrosynthesis (MES) has been proposed as a sustainable platform to simultaneously achieve wastewater treatment, renewable energy generation and chemicals production. Currently, the CO₂ valorization via MES is restricted by the low production rate, while that via electrochemical reduction is limited by the production of C1 products with high efficiency and selectivity. The electrocatalyst-assisted MES could potentially solve these bottlenecks of both MES and electrochemical reduction technology by increasing the production rate and expanding the product range. Here, four types of metals were evaluated for mixed culture-based, electrocatalyst-assisted MES with the fabrication of electrical-biological hybrid cathodes. Cathodes based on In, Zn, Ti and Cu showed high parallelism at 30 A/m². However, no parallelism was observed at 50 A/m², and only Zn experienced a further increase of the maximum acetic acid production rate (1.23 ± 0.02 g/L/d, 313 ± 5 g/m²/d) and titer (9.2 ± 0.1 g/L), with the highest value of the production rate normalized to the project area of the fiber cathodes. Other volatile fatty acids and ethanol were below 0.5 g/L. Moreover, it was the sharp H₂ generation, which mainly caused the fluctuation of coulombic efficiency. The application of such Zn-based electrical-biological hybrid system shall provide a more efficient route for CO₂ valorization.

Induction of cathodic voltage reversal and hydrogen peroxide synthesis in a serially stacked microbial fuel cell

We developed an innovative strategy to address the inhibition of anode-respiring bacteria due to voltage reversal in serially stacked microbial fuel cells by inducing cathodic voltage reversal and H₂O₂ production. When platinum-coated carbon (Pt/C) cathodes were employed (stacked MFC_Pt/C) and the MFC was operated with acetate medium, the last unit (MFC 4) caused a voltage reversal of -0.8 V with a substantial anode overpotential of 1.22 V. After replacing the Pt/C cathode with a Pt-free carbon gas diffusion electrode in MFC 4, an electrode overpotential, approximately 0.5 V, was shifted from the anode to the cathode, inducing cathodic voltage reversal. Under cathodic voltage reversal, MFC 4 generated H₂O₂ at a production rate of 117 mg H₂O₂/m²-h. Hence, under cathodic voltage reversal induced by Pt-free cathodes, due to less anode polarization, the anode-respiring activity can largely be sustained in a stacked MFC that treats organic wastewater consistently and the quality of treated wastewater may be improved with energy-efficient and on-site generated H₂O₂.

Electricity generation from Nopal biogas effluent using a surface modified clay cup (cantarito) microbial fuel cell

A modified clay cup (cantarito) microbial fuel cell (C-MFCs) was designed to digest the biomass effluent from a nopal biogas (NBE). To improve the process, commercial acrylic varnish (AV) was applied to the C-MFCs. The experiment was performed as:Both-C-MFCs, painting of AV on both sides of the clay cup; In-C-MFCs, painting of AV on the internal side, and Out-C-MFCs painting of AV on the external side. The order for the maximum volumetric power densities were Both-C-MFCs (1841.99 mW/m³)>Out-C-MFCs (1023.74 mW/m³) >In-C-MFCs (448.90 mW/m³). The control experiment without applied varnish did not show a stable potential, supporting the idea that the acryloyl group in varnish could favor the performance. Finally, a 4-digits clock was powered with two, Both-C-MFCs connected in series; the microbial diversity in this format was explored and a well-defined bacterial community including members of the phyla Actinobacteria, Bacteroidetes, Firmicutes, Proteobacteria, Synergistetes and candidate division TM7 was found.

Effects of nitrate and sulfate on the performance and bacterial community structure of membrane-less single-chamber air-cathode microbial fuel cells

Membrane-less, single-chamber, air-cathode, microbial fuel cells (ML-SC MFCs) have attracted attention as being suitable for wastewater treatment. In this study, the effects of nitrate and sulfate on the performance of ML-SC MFCs and their bacterial structures were evaluated. The maximum power density increased after nitrate addition from 8.6 mW·m^-2 to 14.0 mW·m^-2, while it decreased after sulfate addition from 11.5 mW·m^-2 to 7.7 mW·m^-2. The chemical oxygen demand removal efficiencies remained at more than 90% regardless of the nitrate or sulfate additions. The nitrate was removed completely (93.0%) in the ML-SC MFC, while the sulfate removal efficiency was relatively low (17.6%). Clostridium (23.1%), Petrimonas (20.0%), and unclassified Rhodocyclaceae (6.2%) were dominant on the anode before the addition of nitrate or sulfate. After the addition of nitrate, Clostridium was still the most dominant on the anode (23.6%), but Petrimonas significantly decreased (6.0%) and unclassified Rhodocyclaceae increased (17.1%). After the addition of sulfate, the amount of Clostridium almost doubled in the composition on the anode (43.2%), while Petrimonas decreased (5.5%). The bacterial community on the cathode was similar to that on the anode after the addition of nitrate. However, Desulfovibrio was remarkably dominant on the cathode (32.9%) after the addition of sulfate. These results promote a deeper understanding of the effects of nitrate or sulfate on the ML-SC MFCs' performance and their bacterial community.

Bacterial community shift and improved performance induced by in situ preparing dual graphene modified bioelectrode in microbial fuel cell

Dual graphene modified bioelectrode (D-GM-BE) was prepared by in situ microbial-induced reduction of graphene oxide (GO) and polarity reversion in microbial fuel cell (MFC). Next Generation Sequencing technology was used to elucidate bacterial community shift in response to improved performance in D-GM-BE MFC. The results indicated an increase in the relative ratio of Proteobacteria, but a decrease of Firmicutes was observed in graphene modified bioanode (GM-BA); increase of Proteobacteria and Firmicutes were observed in graphene modified biocathode (GM-BC). Genus analysis demonstrated that GM-BE was beneficial to enrich electrogens. Typical exoelectrogens were accounted for 13.02% and 8.83% in GM-BA and GM-BC. Morphology showed that both GM-BA and GM-BC formed 3D-like graphene/biofilm architectures and revealed that the biofilm viability and thickness would decrease to some extent when GM-BE was formed. D-GM-BE MFC obtained the maximum power density by 124.58±6.32mWm^-2, which was 2.34 times over C-BE MFC.