Computational and experimental analysis of organic degradation positively regulated by bioelectrochemistry in an anaerobic bioreactor system

Microbiome regulation for sustainable wastewater treatment

Sustainable wastewater treatment is essential for attaining clean water and sanitation, aligning with UN Sustainable Development Goals. Wastewater treatment plants (WWTPs) have utilized environmental microbiomes in biological treatment processes in this effort for over a century. However, the inherent complexity and redundancy of microbial communities, and emerging chemical and biological contaminants, challenge the biotechnology applications. Over the past decades, understanding and utilization of microbial energy metabolism and interaction relationships have revolutionized the biological system. In this review, we discuss how microbiome regulation strategies are being used to generate actionable performance for low-carbon pollutant removal and resource recovery in WWTPs. The engineering application cases also highlight the real feasibility and promising prospects of the microbiome regulation approaches. In conclusion, we recommend identifying environmental risks associated with chemical and biological contaminants transformation as a prerequisite. We propose the integration of gene editing and enzyme design to precisely regulate microbiomes for the synergistic control of both chemical and biological risks. Additionally, the development of integrated technologies and engineering equipment is crucial in addressing the ongoing water crisis. This review advocates for the innovation of conventional wastewater treatment biotechnology to ensure sustainable wastewater treatment.

Electrical stress and acid orange 7 synergistically clear the blockage of electron flow in the methanogenesis of low-strength wastewater

Energy recovery from low-strength wastewater through anaerobic methanogenesis is constrained by limited substrate availability. The development of efficient methanogenic communities is critical but challenging. Here we develop a strategy to acclimate methanogenic communities using conductive carrier (CC), electrical stress (ES), and Acid Orange 7 (AO7) in a modified biofilter. The synergistic integration of CC, ES, and AO7 precipitated a remarkable 72-fold surge in methane production rate compared to the baseline. This increase was attributed to an altered methanogenic community function, independent of the continuous presence of AO7 and ES. AO7 acted as an external electron acceptor, accelerating acetogenesis from fermentation intermediates, restructuring the bacterial community, and enriching electroactive bacteria (EAB). Meanwhile, CC and ES orchestrated the assembly of the archaeal community and promoted electrotrophic methanogens, enhancing acetotrophic methanogenesis electron flow via a mechanism distinct from direct electrochemical interactions. The collective application of CC, ES, and AO7 effectively mitigated electron flow impediments in low-strength wastewater methanogenesis, achieving an additional 34% electron recovery from the substrate. This study proposes a new method of amending anaerobic digestion systems with conductive materials to advance wastewater treatment, sustainability, and energy self-sufficiency.

Regulating microbial redox reactions towards enhanced removal of refractory organic nitrogen from wastewater

Biotechnology for wastewater treatment is mainstream and effective depending upon microbial redox reactions to eliminate diverse contaminants and ensure aquatic ecological health. However, refractory organic nitrogen compounds (RONCs, e.g., nitro-, azo-, amide-, and N-heterocyclic compounds) with complex structures and high toxicity inhibit microbial metabolic activity and limit the transformation of organic nitrogen to inorganic nitrogen. This will eventually result in non-compliance with nitrogen discharge standards. Numerous efforts suggested that applying exogenous electron donors or acceptors, such as solid electrodes (electrostimulation) and limited oxygen (micro-aeration), could potentially regulate microbial redox reactions and catabolic pathways, and facilitate the biotransformation of RONCs. This review provides comprehensive insights into the microbial regulation mechanisms and applications of electrostimulation and micro-aeration strategies to accelerate the biotransformation of RONCs to organic amine (amination) and inorganic ammonia (ammonification), respectively. Furthermore, a promising approach involving in-situ hybrid anaerobic biological units, coupled with electrostimulation and micro-aeration, is proposed towards engineering applications. Finally, employing cutting-edge methods including multi-omics analysis, data science driven machine learning, technology-economic analysis, and life-cycle assessment would contribute to optimizing the process design and engineering implementation. This review offers a fundamental understanding and inspiration for novel research in the enhanced biotechnology towards RONCs elimination.

Potential application of bioelectrochemical systems in cold environments

Globally, more than half of the world's regions and populations inhabit psychrophilic and seasonally cold environments. Lower temperatures can inhibit the metabolic activity of microorganisms, thereby restricting the application of traditional biological treatment technologies. Bioelectrochemical systems (BES), which combine electrochemistry and biocatalysis, can enhance the resistance of microorganisms to unfavorable environments through electrical stimulation, thus showing promising applications in low-temperature environments. In this review, we focus on the potential application of BES in such environments, given the relatively limited research in this area due to temperature limitations. We select microbial fuel cells (MFC), microbial electrolytic cells (MEC), and microbial electrosynthesis cells (MES) as the objects of analysis and compare their operational mechanisms and application fields. MFC mainly utilizes the redox potential of microorganisms during substance metabolism to generate electricity, while MEC and MES promote the degradation of refractory substances by augmenting the electrode potential with an applied voltage. Subsequently, we summarize and discuss the application of these three types of BES in low-temperature environments. MFC can be employed for environmental remediation as well as for biosensors to monitor environmental quality, while MEC and MES are primarily intended for hydrogen and methane production. Additionally, we explore the influencing factors for the application of BES in low-temperature environments, including operational parameters, electrodes and membranes, external voltage, oxygen intervention, and reaction devices. Finally, the technical, economic, and environmental feasibility analyses reveal that the application of BES in low-temperature environments has great potential for development.

Paradigm shift in Nutrient-Energy-Water centered sustainable wastewater treatment system through synergy of bioelectrochemical system and anaerobic digestion

With advancements in research and the necessity of improving the performance of bioelectrochemical system (BES), coupling anaerobic digestion (AD) with BES is crucial for energy gain from wastewater and bioremediation. Hybridization of BES-AD concept opens new avenues for pollutant degradation, carbon capture and nutrient-resource recovery from wastewater. The strength of merging BES-AD lies in synergy, and this approach was employed to differentiate fads from strategies with the potential for full-scale implementation and making it an energy-positive system. The integration of BES and AD system increases the overall performance and complexity of combined system and the cost of operation. From a technical standpoint, the primary determinants of BES-AD feasibility for field applications are the scalability and economic viability. High potential market for such integrated system attract industrial partners for more industrial trials and investment before commercialization. However, BES-AD with high energy efficacy and negative economics demands performance boost.

Electrochemical promotion of organic waste fermentation: Research advances and prospects

The current methods of treating organic waste suffer from limited resource usage and low product value. Research and development of value-added products emerges as an unavoidable trend for future growth. Electro-fermentation (EF) is a technique employed to stimulate cell proliferation, expedite microbial metabolism, and enhance the production of value-added products by administering minute voltages or currents in the fermentation system. This method represents a novel research direction lying at the crossroads of electrochemistry and biology. This article documents the current progress of EF for a range of value-added products, including gaseous fuels, organic acids, and other organics. It also presents novel value-added products, such as 1,3-propanediol, 3-hydroxypropionic acid, succinic acid, acrylic acid, and lysine. The latest research trends suggest a focus on EF for cogeneration of value-added products, studying microbial community structure and electroactive bacteria, exploring electron transfer mechanisms in EF systems, developing effective methods for nutrient recovery of nitrogen and phosphorus, optimizing EF conditions, and utilizing biosensors and artificial neural networks in this area. In this paper, an analysis is conducted on the challenges that currently exist regarding the selection of conductive materials, optimization of electrode materials, and development of bioelectrochemical system (BES) coupling processes in EF systems. The aim is to provide a reference for the development of more efficient, advanced, and value-added EF technologies. Overall, this paper aims to provide references and ideas for the development of more efficient and advanced EF technology.

Insights into current bio-processes and future perspectives of carbon-neutral treatment of industrial organic wastewater: A critical review

With the rise of the concept of carbon neutrality, the current wastewater treatment process of industrial organic wastewater is moving towards the goal of energy conservation and carbon emission reduction. The advantages of anaerobic digestion (AD) processes in industrial organic wastewater treatment for bio-energy recovery, which is in line with the concept of carbon neutrality. This study summarized the significance and advantages of the state-of-the-art AD processes were reviewed in detail. The application of expanded granular sludge bed (EGSB) reactors and anaerobic membrane bioreactor (AnMBR) were particularly introduced for the effective treatment of industrial organic wastewater treatment due to its remarkable prospect of engineering application for the high-strength wastewater. This study also looks forward to the optimization of the AD processes through the enhancement strategies of micro-aeration pretreatment, acidic-alkaline pretreatment, co-digestion, and biochar addition to improve the stability of the AD system and energy recovery from of industrial organic wastewater. The integration of anaerobic ammonia oxidation (Anammox) with the AD processes for the post-treatment of nitrogenous pollutants for the industrial organic wastewater is also introduced as a feasible carbon-neutral process. The combination of AnMBR and Anammox is highly recommended as a promising carbon-neutral process for the removal of both organic and inorganic pollutants from the industrial organic wastewater for future perspective. It is also suggested that the AD processes combined with biological hydrogen production, microalgae culture, bioelectrochemical technology and other bio-processes are suitable for the low-carbon treatment of industrial organic wastewater with the concept of carbon neutrality in future.

Simultaneous recovery of bio-sulfur and bio-methane from sulfate-rich wastewater by a bioelectrocatalysis coupled two-phase anaerobic reactor

The microbial electrolysis cell coupled the two-phase anaerobic digestion (MEC-TPAD) was developed for simultaneous recovery of bio-sulfur and bio-methane from sulfate-rich wastewater. In acidogenic phase, the produced sulfides were efficiently converted into bio-sulfur via anodic bio-oxidation, with a maximum recovery of 59 ± 5.5 %. The anode coupled acidogenesis produced more volatile fatty acids which were benefit for the subsequent methanogenesis. The cathode in methanogenic phase created a suitable pH condition and enhanced the methanogenesis. Correspondingly, the maximum bio-methane yield in MEC-TPAD was 2 times higher than that in TPAD. Microbial communities revealed that major functional consortia capable of sulfides oxidation (e.g. Alcaligenes) in anode biofilm, hydrogenotrophic methanogenesis (e.g. Methanobacterium) in cathode biofilm, and acetotrophic methanogenesis (e.g. Methanosaeta) in methanogenic sludge were enriched. Economic benefit could totally cover the cost of input electric energy. This work opens an appealing avenue for recovering nutrient and energy from wastewater.

Microbial fingerprints of methanation in a hybrid electric-biological anaerobic digestion

Biomethane as a sustainable, alternative, and carbon-neutral renewable energy source to fossil fuels is highly needed to alleviate the global energy crisis and climate change. The conventional anaerobic digestion (AD) process for biomethane production from waste(water) streams has been widely employed while struggling with a low production rate, low biogas qualities, and frequent instability. The electric-biologically hybrid microbial electrochemical anaerobic digestion system (MEC-AD) prospects more stable and robust biomethane generation, which facilitates complex organic substrates degradation and mediates functional microbial populations by giving a small input power (commonly voltages < 1.0 V), mainly enhancing the communication between electroactive microorganisms and (electro)methanogens. Despite numerous bioreactor tests and studies that have been conducted, based on the MEC-AD systems, the integrated microbial fingerprints, and cooperation, accelerating substrate degradation, and biomethane production, have not been fully summarized. Herein, we present a comprehensive review of this novel developing biotechnology, beginning with the principles of MEC-AD. First, we examine the fundamentals, configurations, classifications, and influential factors of the whole system's performances (reactor types, applied voltages, temperatures, conductive materials, etc.,). Second, extracellular electron transfer either between diverse microbes or between microbes and electrodes for enhanced biomethane production are analyzed. Third, we further conclude (electro)methanogenesis, and microbial interactions, and construct ecological networks of microbial consortia in MEC-AD. Finally, future development and perspectives on MEC-AD for biomethane production are proposed.

Rice husk-intensified cathode driving bioelectrochemical reactor for remediating nitrate-contaminated groundwater

To achieve economical and eco-friendly denitrification, rice husk-intensified cathode driving bioelectrochemical reactor (RCBER) was constructed with rice husk as solid-phase carbon source and microbial carrier. Results demonstrated that the application of current improved the utilization of rice husk and enhanced the denitrification, and the quenching of anodic hydroxyl radicals by rice husk also improved the microbial resistance to current. The highest nitrate removal rate as 0.34 mg-N/(L∙d), higher economic benefits, i.e., current efficiency as 31.6% and energy consumption as 2.43 kWh/g NO₃^--N, and the highest environmental benefit, i.e., hydrogenotrophic denitrification contribution as 37.9%, were obtained at 200 mA/m². The best performance at 200 mA/m² was related to its better microenvironment, such as lower accumulation of anodic by-products and higher bioavailability of rice husks, as well as higher microbial metabolic activity, such as stable extracellular polymeric substance, the maximum electron transport system activity as 11.63 ± 0.14 μg O₂·g^-1·min^-1·mg protein^-1 and the highest activity of nitrate reductase (3.15-fold that of control check). The application of current realized the coexistence of heterotrophic and hydrogenotrophic denitrifiers, and multiple functional bacteria such as anaerobic denitrifiers Flavobacterium, aerobic denitrifiers Comamonas, hydrogenotrophic denitrifiers Thermomonas and electron transfer-related Enterobacter coexisted at 200 mA/m², thereby improving RCBER's adaptability to the complex microenvironment. This study provides the theoretical basis for realizing a win-win situation of environmental pollution remediation and agricultural waste disposal.

Integrating anaerobic digestion with bioelectrochemical system for performance enhancement: A mini review

Strategies for enhancing performance of anaerobic digestion (AD) process has been widely studied. The bioelectrochemical system (BES), including microbial fuel cell, microbial electrolysis cell (MEC), microbial desalination cell, and microbial electrosynthesis, had been proposed to integrate with AD for performance enhancement. This mini-review summarizes the current researches that integrated AD with BES to enhance the performance of the former. The working principles of BES were introduced. The integrated configurations of AD-BES as well as the associated applications were summarized. The statistics analysis for AD-MEC performances reported in literature were then performed to confirm the effects of reactor size and applied voltage on the methane productivity and enhancement. The challenges and prospects of the integrated AD-BES were delineated, and the potential scenarios of applying integrated AD-BES in field were discussed.

Integrating anaerobic digestion with microbial electrolysis cell for performance enhancement: A review

Anaerobic digestion has been recognized as promising technology for bioenergy production, while the bottlenecks including long start up times, low methane contents, and susceptibility toward environmental change attenuate the process benefits. Integrating microbials electrolysis cell (MEC) with anaerobic digestion (AD) has been recognized as a promising strategy for alleviate the performance bottleneck. This review summarized and updated the current researches that utilize MEC-AD for enhanced methane production from biomass. The integrated AD-MEC was first elucidated, followed by illustrations on strategies for process performance enhancements, parameters effects, and the associated applications. Finally, the challenges and prospects were outlined in this work.

Performance and mechanism of sulfamethoxazole removal in different bioelectrochemical technology-integrated constructed wetlands

Sulfamethoxazole (SMX) has a high concentration and detection frequency in aquatic environments due to the poor removal efficiency of traditional biological treatment processes. Bioelectrochemical technology-integrated constructed wetlands (CWs) have great potential for SMX removal; however, the process of SMX removal in different bioelectrochemical technology-integrated CWs (microbial fuel cell (MFC) and direct current (EC)) remains unclear. To address this, we examined the mechanism of SMX removal in MFCCW and ECCW. The results revealed that the SMX removal efficiency can reach 96.0 ± 2.4% in the ECCW and 97.2 ± 2.2% in the MFCCW. The enhancement of MFC for SMX removal in CW was slightly better than that in direct current (p > 0.05). It was found that the adsorption process of SMX in the substrate promoted by EC was more enhanced than that by MFC. Furthermore, bioelectrochemical technology improved plant activity, including root and enzymatic (superoxide dismutase, peroxidase, and catalase) activities, and fluorescence parameters (photochemical quenching coefficient, non-photochemical quenching coefficient, and quantum efficiency of PS II). Significant differences were found between CW and ECCW (p < 0.05), while no significant differences were found between CW and MFCCW (p > 0.05). The microbial activity and abundance in CW were improved by bioelectrochemical technology, and the microbial community structure was optimised to be simpler and more stable. However, EC tended to promote microbial and plant activity in CW, whereas MFC tended to optimise the microbial community and improve the tightness and stability of the module. The enhanced difference might also account for the changes in the SMX degradation pathway. 4-aminobenzenesulfonic acid (TP174), 3-amino-5-methylisoxazole (TP99) and 5-methylisoxazole (TP84) were all common products in the three reactors, whereas TP99 underwent further ring-opening in MFCCW and TP174 underwent further hydrolysis in ECCW. This study provided an important reference for the targeted regulation of plants and microorganisms in constructed wetlands via different bioelectrochemistry to enhance characteristic pollutants degradation.

Enhanced anaerobic digestion of swine manure via a coupled microbial electrolysis cell

Microbial electrolysis cell coupled anaerobic digestion (MEC-AD) is a new technology in energy recovery and waste treatment, which could be used to recycle swine manure. Here, different applied voltage effects were studied using MEC-AD with swine manure as a substrate. The maximum cumulative biogas and methane yields, both occurring with 0.9 V, were 547.3 mL/g total solid (TS) and 347.7 mL/g TS, respectively. The increased energy can counterbalance the electrical input. First order, logistic, gompertz, and back-propagation artificial neural network (BP-ANN) models were used to study cumulative biogas and methane yields. The BP-ANN model was superior to the other three models. The maximum degradation rate of hemicellulose, cellulose, and lignin was 60.97%, 48.59%, and 31.59% at 0.9 V, respectively. The BP-ANN model establishes a model for cumulative biogas and methane yields using MEC-AD. Thus, MEC-AD enhanced biogas and methane production and accelerated substrate degradation at a suitable voltage.

Methane production from acetate, formate and H2/CO2 under high ammonia level: Modified ADM1 simulation and microbial characterization

This study evaluated the methanogenic performance of typical substrates (acetate, formate, H₂/CO₂, and glucose) under low and high ammonia levels and the Anaerobic Digestion Model No.1 (ADM1) was extended and modified for better simulation and understanding of the process. Formate-utilizing and hydrogen-utilizing methanogenesis showed stronger ammonia resistance than acetate-utilizing methanogenesis (13-23% vs. 34% decrease in methane production (MP)). Model extension, based on foundational experiments fed with three typical precursors (R² > 0.92), was then validated with glucose degradation experiments, and satisfactory predictions of MP and total volatile fatty acids were obtained (R² > 0.91). Based on the modified ADM1, the carbon fluxes of glucose degradation were determined, and formate-utilizing methanogenesis showed its importance with a 28-34% contribution of the total methanation, becoming the dominant pathway under high ammonia level. Formate-utilizing methanogenesis also had a thermodynamic advantage among the three pathways. 16S rRNA sequencing suggested a homology between the hydrogen-utilizing and formate-utilizing methanogens. Methanobacterium and Methanobrevibacter were found to be key methanogens, and their enrichment under high ammonia level confirmed the stronger ammonia tolerance of formate-utilizing and hydrogen-utilizing methanogenesis. The microbial characterization and modified ADM1 simulations supported each other.

Review and perspectives of enhanced volatile fatty acids production from acidogenic fermentation of lignocellulosic biomass wastes

Lignocellulosic biomass wastes are abundant resources that are usually valorized for methane-rich biogas via anaerobic digestion. Conversion of lignocellulose into volatile fatty acids (VFA) rather than biogas is attracting attention due to the higher value-added products that come with VFA utilization. This review consolidated the latest studies associated with characteristics of lignocellulosic biomass, the effects of process parameters during acidogenic fermentation, and the intensification strategies to accumulate more VFA. The differences between anaerobic digestion technology and acidogenic fermentation technology were discussed. Performance-enhancing strategies surveyed included (1) alkaline fermentation; (2) co-digestion and high solid-state fermentation; (3) pretreatments; (4) use of high loading rate and short retention time; (5) integration with electrochemical technology, and (6) adoption of membrane bioreactors. The recommended operations include: mesophilic temperature (thermophilic for high loading rate fermentation), C/N ratio (20-40), OLR (< 12 g volatile solids (VS)/(L·d)), and the maximum HRT (8-12 days), alkaline fermentation, membrane technology or electrodialysis recovery. Lastly, perspectives were put into place based on critical analysis on status of acidogenic fermentation of lignocellulosic biomass wastes for VFA production.

The underlying mechanism of enhanced methane production using microbial electrolysis cell assisted anaerobic digestion (MEC-AD) of proteins

Anaerobic digestion (AD) is a promising technology capable of converting waste matter into bio-energy. Recent studies have reported that microbial electrolysis cell assisted anaerobic digestion (MEC-AD) is an effective system for methane production from organic waste, via enhanced electron transfer. However, little is known about the effects of applied voltage on the AD of proteins. Herein, the mechanism of MEC-AD on protein digestion was investigated using varying concentrations of bovine serum albumin (BSA) as the protein substrate (500 mg/L, 4 g/L, and 20 g/L BSA). Experimental results showed that the applied voltage can not only enhance the methane production rate from 23.8% to 45.6% at low and medium organic loading (BSA concentration of 500 mg/L and 4 g/L), but also improve the methanogenesis efficiency increased by 225.4% at high BSA concentration (20 g/L) with the applied voltage of 0.6 V compared to that with open circuit. Mechanism explorations revealed that the applied voltage significantly enhanced the acidogenesis and methanogenesis processes in the AD of proteins. Microbial community characterization showed that with the applied voltage, the abundance of fermentative bacteria increased by 46.7 % at the anode, while, the abundance of Methanobacterium at the cathode increased from 10.4 to 84.3%, indicating the methanogenesis pathway transformed from acetoclastic to hydrogenotrophic. External circuit electron transfer calculations demonstrated that only 10% of the produced methane could be attributed to direct interspecies electron transfer (DIET). From a thermodynamic perspective, the applied external voltage led to a reduction in the cathodic potential to -0.9 V, which is beneficial for enhanced methane production via mediated interspecies electron transfer (MIET) by enrichment of hydrogenotrophic methanogens. The findings reported here reveal the previously unrecognized contribution of proteins to MEC-AD, while also furthering our understanding of the role of applied voltage in the MEC-AD process.

An external magnetic field moderating Cr(VI) stress for simultaneous enhanced acetate production and Cr(VI) removal in microbial electrosynthesis system

A stressful heavy metal circumstance disfavors production of acetate from bicarbonate reduction in the biocathode of microbial electrosynthesis system (MES) with simultaneous function of heavy metal removal/recovery. It is of great interest to explore effective approaches to moderate the heavy metal stress with achievement of simultaneous enhanced acetate production and heavy metal removal in MES. Herein, a magnetic field strength of 100 mT was successfully employed to moderate Cr(VI) stress, achieving simultaneous production of acetate at a rate of 1.48 ± 0.01 mg/L/h and Cr(VI) removal at a rate of 1.67-2.42 mg/L/h in the Serratia marcescens Q1 catalyzed cathode of MES under periodical addition of bicarbonate and Cr(VI), 1.35-fold (acetate production) and 1.34-1.46 times (Cr(VI) removal) of those in the controls in the absence of magnetic field. This simultaneous efficient acetate production and Cr(VI) removal was regulated by the magnetic field and the stressful Cr(VI), which induced the S. marcescens to physiologically release additive amounts of extracellular polymeric substances with a compositional diversity and containing the electrochemically active c-type cytochromes to facilitate extracellular electron transfer. This study confirmed the importance of magnetic field in developing the S. marcescens catalytic activity for moderating Cr(VI) stress, and thus provided a feasible approach for simultaneous efficient acetate production and Cr(VI) removal/recovery in MES, from waters contaminated with Cr(VI).

Towards the practical application of bioelectrochemical anaerobic digestion (BEAD): Insights into electrode materials, reactor configurations, and process designs

Anaerobic digestion (AD) is one of the most widely adopted bioenergy recovery technologies globally. Despite the wide adoption, AD has been challenged by the unstable performances caused by imbalanced substrate and/or electron availability among different reaction steps. Bioelectrochemical anaerobic digestion (BEAD) is a promising concept that has demonstrated potential for balancing the electron transfer rates and enhancing the methane yield in AD during shocks. While great progress has been made, a wide range of, and sometimes inconsistent engineering and technical strategies were attempted to improve BEAD. To consolidate past efforts and guide future development, a comprehensive review of the fundamental bioprocesses in BEAD is provided herein, followed by a critical evaluation of the engineering and technical optimizations attempted thus far. Further, a few novel directions and strategies that can enhance the performance and practicality of BEAD are proposed for future research to consider. This review and outlook aim to provide a fundamental understanding of BEAD and inspire new research ideas in AD and BEAD in a mechanism-informed fashion.

Bacterial community structure and gene function prediction in response to long-term running of dual graphene modified bioelectrode bioelectrochemical systems

This work studied bacterial community structure and gene function prediction in long-term running of dual graphene modified bioelectrode bioelectrochemical systems (LT D-GM-BE BES, 2 year). The maximum power density of LT D-GM-BE BES was 99.03 ± 3.64 mW/m², which was 3.66 times of dual control BES (D-C-BE BES), and the transfer resistance of LT GM-BE was just approximately 1/4 of control bioelectrode (C-BE). Proteobacteria and Firmicutes were dominant bacteria in long-term modified bioanode (LT GM-BA, 30.03% and 45.64%), and in long-term modified biocathode (LT GM-BC) was Armatimonadetes (47.14%) in phylum level. The dominant bacteria in LT GM-BA was Clostridium (30.56%), in GM-BC was Chthonomonas (47.14%) in genus level. Gene function related with substrate, energy metabolism and environmental adaptation were enriched. LT GM-BE was tended to enrich dominant bacteria and enrich gene to adapt to micro-environmental changes. This study would provide metagenomics information for long-term running of BES in future.

Electrochemistry-stimulated environmental bioremediation: Development of applicable modular electrode and system scale-up

Bioelectrochemical systems (BESs) have been studied extensively during the past decades owing primarily to their versatility and potential in addressing the water-energy-resource nexus. In stark contrast to the significant advancements that have been made in developing innovative processes for pollution control and bioresource/bioenergy recovery, minimal progress has been achieved in demonstrating the feasibility of BESs in scaled-up applications. This lack of scaled-up demonstration could be ascribed to the absence of suitable electrode modules (EMs) engineered for large-scale application. In this study, we report a scalable composite-engineered EM (total volume of 1 m³), fabricated using graphite-coated stainless steel and carbon felt, that allows integrating BESs into mainstream wastewater treatment technologies. The cost-effectiveness and easy scalability of this EM provides a viable and clear path to facilitate the transition between the success of the lab studies and applications of BESs to solve multiple pressing environmental issues at full-scale.

Alkaline aided thermophiles pretreatment of waste activated sludge to increase short chain fatty acids production: Microbial community evolution by alkaline on hydrolysis and fermentation

Adding alkaline into an anaerobic waste activated sludge (WAS) fermentation with thermophilic bacteria pretreatment could efficiently improve short-chain fatty acids (SCFAs) accumulation to 3550 ± 120 mg COD/L. The acidification rate in combined test was 21.2%, while that was 15.6% and 10.7% in sole thermophilic bacteria pretreatment and control tests respectively. Four distinct groups of microbes could be identified with noticeable shifts using the combined pretreatments, and tremendous effects were analyzed on organic content especially of the soluble proteins and SCFAs concentrations. Particularly, alkaline addition would significantly change the functional microbial structures, including the decrease of Caloramator with the function of thermophilic proteolytic and the increase of Acidobacteria TM7 and Petrimonas sp. The results above suggested that alkaline addition could decrease the hydrolytic substances consume by thermotolerance bacteria and final improve SCFAs accumulation in fermentation process.

New Perspectives on Fuel Cell Technology: A Brief Review

Energy storage and conversion is a very important link between the steps of energy production and energy consumption. Traditional fossil fuels are a natural and unsustainable energy storage medium with limited reserves and notorious pollution problems, therefore demanding a better choice to store and utilize the green and renewable energies in the future. Energy and environmental problems require a clean and efficient way of using the fuels. Fuel cell functions to efficiently convert oxidant and chemical energy accumulated in the fuel directly into DC electric, with the by-products of heat and water. Fuel cells, which are known as effective electrochemical converters, and electricity generation technology has gained attention due to the need for clean energy, the limitation of fossil fuel resources and the capability of a fuel cell to generate electricity without involving any moving mechanical part. The fuel cell technologies that received high interest for commercialization are polymer electrolyte membrane fuel cells (PEMFCs), solid oxide fuel cells (SOFCs), and direct methanol fuel cells (DMFCs). The optimum efficiency for the fuel cell is not bound by the principle of Carnot cycle compared to other traditional power machines that are generally based on thermal cycles such as gas turbines, steam turbines and internal combustion engines. However, the fuel cell applications have been restrained by the high cost needed to commercialize them. Researchers currently focus on the discovery of different materials and manufacturing methods to enhance fuel cell performance and simplify components of fuel cells. Fuel cell systems' designs are utilized to reduce the costs of the membrane and improve cell efficiency, durability and reliability, allowing them to compete with the traditional combustion engine. In this review, we primarily analyze recent developments in fuel cells technologies and up-to-date modeling for PEMFCs, SOFCs and DMFCs.

Reinjection oilfield wastewater treatment using bioelectrochemical system and consequent corrosive community evolution on pipe material

The corrosive issues are comprehensively caused in oilfield rejection system, in which sulfide is one of (bio-)chemical factors leading to high corrosive rate and blocking problem. Generally, aerobic treatment is a well-established and cost-effective unit for sulfide removal before oilfield wastewater reinjection. However, the residual dissolved oxygen (DO), which causes chemical, biological and electrochemical corrosion to water injection pipeline equipment, is still high after multi-stage filtration of DO removal. Here, a novel system to achieve quick and efficient DO removal through a three-electrode (cathode-anode-cathode)-upflow bioelectrochemical reactor (R_CAC) was constructed before wastewater reinjection. Bioelectrodes were well established by utilizing organic matters of oilfield wastewater and conducted extracellular electron transport to achieve a steady DO removal from ∼5 mg/L to 0.01 mg/L (HRT 6 h), the DO removal efficiency reached approximately 100%, and the downside biocathode made the largest contribution for DO removal. In the treated wastewater, the corrosion rate of stainless steel N80 ultimately declined over 30 days testing. As a result of DO removal and ammonia conversion to nitrate by bioelectrodes, the corrosive microorganisms were substantially changed. Especially, sulfate-reducing bacteria (SRB) on the surface of N80 immersed in treated wastewater were decreased in abundance; while nitrate-reducing bacteria (NRB) enriched more, which can compete with SRB to prevent biological corrosion.

Contribution analysis of methane production from food waste in bulk solution and on bio-electrode in a bio-electrochemical anaerobic digestion reactor

Quantitative evaluation of methane production either in bulk sludge or biofilm on electrodes was performed in a bio-electrochemical anaerobic digestion (BEAD) reactor with a lower electrode surface area/reactor working volume (A/V) ratio (7.0 m²/m³). Methane production by electrochemical reaction was also evaluated in the BEAD reactor with a biofilm-free electrode under the same conditions as in other experimental sets. The contributions of bulk sludge, biofilms on the electrodes, and electrochemical reactions in the BEAD reactor, on methane production, were 70.2%, 29.8%, and 0%, respectively. The principal methane-producing reactions occurred in the bulk sludge facilitated by H₂-dependent methylotrophic and hydrogenotrophic methanogens. Hydrogenotrophic methanogenesis was also the main methane-producing reaction in the biofilms attached to the bio-electrodes. Quantitative analysis of methane production (29.8%) in the biofilm revealed that bio-electrochemical processes involving H₂ and direct bio-electrochemical methane production contributed 8.7% and less than 0.1%, respectively. Interestingly, biochemical processes (21.1%) contributed the most to the overall production of methane in the biofilm. Bulk sludge contributed more to methane production than the biofilm, but the methane production per unit mass of volatile solid on the electrodes was about 1.6-times higher than that of bulk sludge. Methane was not produced in the BEAD reactor with biofilm-free electrodes. Therefore, formation and maintenance of biofilms on the electrodes are essential for improved methane production in BEAD reactors.

Electron Fluxes in Biocathode Bioelectrochemical Systems Performing Dechlorination of Chlorinated Aliphatic Hydrocarbons

Bioelectrochemical systems (BESs) are regarded as a promising approach for the enhanced dechlorination of chlorinated aliphatic hydrocarbons (CAHs). However, the electron distribution and transfer considering dechlorination, methanogenesis, and other bioprocesses in these systems are little understood. This study investigated the electron fluxes in biocathode BES performing dechlorination of three typical CAHs, 1,1,2,2-tetrachloroethene (PCE), 1,1,2-trichloroethene (TCE) and 1,2-dichloroethane (1,2-DCA). Anaerobic sludge was inoculated to cathode and biocathode was acclimated by the direct acclimation and selection. The constructed biocathode at −0.26 V had significantly higher dechlorination efficiency (E_24h > 99.0%) than the opened circuit (E_24h of 17.2–27.5%) and abiotic cathode (E_24h of 5.5–10.8%), respectively. Cyclic voltammetry analysis demonstrated the enhanced cathodic current and the positive shift of onset potential in the cathodic biofilm. Under autotrophic conditions with electrons from the cathode as sole energy source (columbic efficiencies of 80.4–90.0%) and bicarbonate as sole carbon source, CAHs dechlorination efficiencies were still maintained at 85.0 ± 2.0%, 91.4 ± 1.8%, and 84.9 ± 3.1% for PCE, TCE, and 1,2-DCA, respectively. Cis-1,2-dichloroethene was the final product for PCE and TCE, while 1,2-DCA went through a different dechlorination pathway with the non-toxic ethene as the final metabolite. Methane was the main by-product of the heterotrophic biocathode, and methane production could be enhanced to some extent by electrochemical stimulation. The various electron fluxes originating from the cathode and oxidation of organic substrates might be responsible for the enhanced CAHs dechlorination, while methane generation and bacterial growth would probably reduce the fraction of electrons provided for CAH dechlorination. The study deals with the dechlorination and competitive bioprocesses in CAH-dechlorinating biocathodes with a focus on electron fluxes.

Weak electricigens: A new avenue for bioelectrochemical research

Electroactivity appears to be a phylogenetically diverse trait independent of cell wall classification, with both Gram-negative and Gram-positive electricigens reported. While numerous electricigens have been observed, the majority of research focuses on a select group of highly electroactive species. Under favorable conditions, many microorganisms can be considered electroactive, either through their own mechanisms or exogenously-added mediators, producing a weak current. Such microbes should not be dismissed based on their modest electroactivity. Rather, they may be key to understanding what drives extracellular electron transfer in response to transient limitations of electron acceptor or donor, with implications for the study of pathogens and industrial bioprocesses. Due to their low electroactivity, such populations are difficult to grow in bioelectrochemical systems and characterise with electrochemistry. Here, a critical review of recent research on weak electricigens is provided, with a focus on the methodology and the overall relevance to microbial ecology and bioelectrochemical systems.

mcrA sequencing reveals the role of basophilic methanogens in a cathodic methanogenic community

Cathodic methanogenesis is a promising method for accelerating and stabilising bioenergy recovery in anaerobic processes. The change in composition of microbial (especially methanogenic) communities in response to an applied potential-and especially the associated pH gradient-is critical for achieving this goal, but is not well understood in cathodic biofilms. We found here that the pH-polarised region in the 2 mm surrounding the cathode ranged from 6.9 to 10.1, as determined using a pH microsensor; this substantially affected methane production rate as well as microbial community structure. Miseq sequencing data of a highly conserved region of the mcrA gene revealed a dramatic variation in alpha diversity of methanogens concentrated in electrode biofilms under the applied potential, and confirmed that the dominant microbes at the cathode were hydrogenotrophic methanogens (mostly basophilic Methanobacterium alcaliphilum). These results indicate that regional pH variation in the microenvironment surrounding the electrode is an ecological niche enriched with Methanobacterium.

A review on the applications of microbial electrolysis cells in anaerobic digestion

Anaerobic digestion (AD) has been widely used for biogas or biofuel generation from waste treatment. Because a low production rate and instability of AD occur frequently, various technologies have been applied to improvement of AD. Microbial electrolysis cells (MECs), an emerging technology, can convert organic matter into hydrogen, methane, and other value-added products. Recent studies showed that application of MEC to AD (MEC-AD) can accelerate degradation of a substrate (including recalcitrant compounds) and alter AD microbial community by enriching exoelectrogens and methanogens thus increasing biogas production. With stable microbial communities established, improvement of MEC-AD for methane production was achieved. MEC-AD process can be monitored in real-time by detecting electric signals, which linearly correlate with substrate concentrations. This review attempts to evaluate interactions among the decomposition of substrates, MEC-AD system, and the microbial community. This analysis should provide useful insights into the improvement of methane production and the performance of MEC-AD.

Potassium ferrate addition as an alternative pre-treatment to enhance short-chain fatty acids production from waste activated sludge

A potentially practical technology based on ferrate (VI), i.e. potassium ferrate (PF), pretreatment integrated into waste activated sludge (WAS) anaerobic fermentation has been presented to greatly enhance short-chain fatty acids (SCFAs) production with a shortened fermentation time. The maximum production of SCFAs, 343mg chemical oxygen demand/g volatile suspended solid with acetic acid proportion of 48.2%, was obtained with PF dosage of 56mg Fe(VI)/g total suspended solid within 5days, which was increased to 5.72times compared to that of control. The mechanism study showed that PF accelerated the release rate of both intracellular and extracellular constituents. And the activities of key hydrolytic enzymes were much improved with PF addition. Moreover, PF positively enriched the abundance of microorganisms responsible for WAS hydrolysis and SCFAs production, especially acetic acid-forming characteristic genera such as Petrimonas, Fusibacter and Acetoanaerobium. Besides, the incubation time of acidogenesis and methanogenesis were separated by PF.