Roles of an easily biodegradable co-substrate in enhancing tetracycline treatment in an intimately coupled photocatalytic-biological reactor

Natural defence mechanisms of electrochemically active biofilms: From the perspective of microbial adaptation, survival strategies and antibiotic resistance

Electrochemically active biofilms (EABs) play an ever-growingly critical role in the biological treatment of wastewater due to its low carbon footprint and sustainability. However, how the multispecies biofilms adapt, survive and become tolerant under acute and chronic toxicity such as antibiotic stress still remains well un-recognized. Here, the stress responses of EABs to tetracycline concentrations (CTC) and different operation schemes were comprehensively investigated. Results show that EABs can quickly adapt (start-up time is barely affected) to low CTC (≤ 5 μM) exposure while the adaptation time of EABs increases and the bioelectrocatalytic activity decreases at CTC ≥ 10 μM. EABs exhibit a good resilience and high anti-shocking capacity under chronic and acute TC stress, respectively. But chronic effects negatively affect the metabolic activity and extracellular electron transfer, and simultaneously change the spatial morphology and microbial community structure of EABs. Particularly, the typical exoelectrogens Geobacter anodireducens can be selectively enriched under chronic TC stress with relative abundance increasing from 45.11% to 85.96%, showing stronger TC tolerance than methanogens. This may be attributed to the effective survival strategies of EABs in response to TC stress, including antibiotic efflux regulated by tet(C) at the molecular level and the secretion of more extracellular proteins in the macro scale, as the C=O bond in amide I of aromatic amino acids plays a critical role in alleviating the damage of TC to cells. Overall, this study highlights the versatile defences of EABs in terms of microbial adaptation, survival strategies, and antibiotic resistance, and deepens the understanding of microbial communities' evolution of EABs in response to acute and chronic TC stress.

Unlocking solar energy's potential: Dual photocatalytic activities of g-C3N4/Sb2S3 for hydrogen evolution and tetracycline degradation in sunlight

This study focuses on developing a g-C3N4/Sb2S3 heterojunction photocatalyst with different g-C3N4 to Sb2S3 weight ratios (1:1, 1:3, and 3:1) for degrading tetracycline (TC) pollutants. The 1:3 ratio (13 GS) exhibited optimal photocatalytic performance, achieving 99% TC degradation under sunlight within 120 min, compared to 78.4% under visible light and 38% under UV light. The 13 GS catalyst demonstrated strong reusability, maintaining 80% degradation efficiency after six cycles. Scavenger experiments identified hydroxyl radicals as crucial for TC degradation, with DMSO reducing activity by 30%. The photocatalyst also showed high hydrogen production with an apparent quantum efficiency (AQE) of 19.8% under standard conditions, and improved AQE in acidic (23%) and basic (22.7%) conditions, and with CH3OH (23.2%). This g-C3N4/Sb2S3 heterojunction offers a promising solution for degrading toxic contaminants and has the potential for solar-powered applications.

Enhanced nitrate reduction in hypotrophic waters with integrated photocatalysis and biodegradation

Addressing nitrate contamination in water bodies is a critical environmental challenge, and Intimately Coupling Photocatalysis and Biodegradation (ICPB) presents a promising solution. However, there is still debate about the effectiveness of ICPB in reducing nitrate under hypotrophic conditions. Further research is needed to understand its microbial metabolic mechanism and the functional changes in bacterial structure. Here we explored microbial metabolic mechanisms and changes in bacterial structure in ICPB reactors integrating a meticulously screened TiO2/g-C3N4 photocatalyst with biofilm. We achieved a 26.3% increase in nitrate reduction using 12.2% less organic carbon compared to traditional biodegradation methods. Metagenomic analysis of the microbial communities in ICPB reactors revealed evolving metabolic pathways conducive to nitrate reduction. This research not only elucidates the photocatalytic mechanism behind nitrate reduction in hypotrophic conditions but also provides genomic insights that pave the way for alternative approaches in water remediation technologies.

Evaluation of biodegradability, toxicity and ecotoxicity of organic acid-based deep eutectic solvents

Over the past decade, deep eutectic systems (DES) have become popular, yet their potential toxicity to living organisms is not well understood. This study fills this gap by examining the toxicity, antibacterial activity and biodegradability of p-toluenesulfonic acid monohydrate (PTSA)-based DESs prepared from ammonium or phosphonium salts. Brine shrimp assays revealed varying toxicity levels of PTSA and salts. Allyltriphenylphosphonium bromide showing the longest survival time among all tested salts while PTSA exhibited a significantly longer duration of cell survival compared to other hydrogen bond donors. PTSA and ammonium salts (N,N-diethylethanolammonium chloride and choline chloride) as individual components showed non-toxic behavior for Gram-negative and Gram-positive bacteria while different PTSA-based DESs showed significant inhibition zones. Fish acute ecotoxicity tests indicated moderately toxicity for individual components and DESs, though higher concentrations increased fish mortality, highlighting the need for careful handling and disposal of PTSA-based DESs to the environment. Biodegradability analyses found all tested DESs to be readily biodegradable and it was reported that, DES 3 prepapred form PTSA and choline chloride has the highest biodegradability level. Notably, all tested DESs showed over 60 % biodegradability after 28 days. This groundbreaking study explores PTSA-based DESs, highlighting their biodegradability and potential use as antibacterial agents. Results revealed that PTSA as individual component is much better from toxicity point of view in comparison with PTSA-based DESs for any further industrial applications.

Asp-tRNAAsn/Glu-tRNAGln amidotransferase A subunit-like amidase mediates the degradation of insecticide flonicamid by Variovorax boronicumulans CGMCC 4969

The main metabolic product of the pyridinecarboxamide insecticide flonicamid, N-(4-trifluoromethylnicotinyl)glycinamide (TFNG-AM), has been shown to have very high mobility in soil, leading to its accumulation in the environment. Catabolic pathways of flonicamid have been widely reported, but few studies have focused on the metabolism of TFNG-AM. Here, the rapid transformation of TFNG-AM and production of the corresponding acid product N-(4-trifluoromethylnicotinoyl) glycine (TFNG) by the plant growth-promoting bacterium Variovorax boronicumulans CGMCC 4969 were investigated. With TFNG-AM at an initial concentration of 0.86 mmol/L, 90.70 % was transformed by V. boronicumulans CGMCC 4969 resting cells within 20 d, with a degradation half-life of 4.82 d. A novel amidase that potentially mediated this transformation process, called AmiD, was identified by bioinformatic analyses. The gene encoding amiD was cloned and expressed recombinantly in Escherichia coli, and the enzyme AmiD was characterized. Key amino acid residue Val154, which is associated with the catalytic activity and substrate specificity of signature family amidases, was identified for the first time by homology modeling, structural alignment, and site-directed mutagenesis analyses. When compared to wild-type recombinant AmiD, the mutant AmiD V154G demonstrated a 3.08-fold increase in activity toward TFNG-AM. The activity of AmiD V154G was greatly increased toward aromatic L-phenylalanine amides, heterocyclic TFNG-AM and IAM, and aliphatic asparagine, whereas it was dramatically lowered toward benzamide, phenylacetamide, nicotinamide, acetamide, acrylamide, and hexanamid. Quantitative PCR analysis revealed that AmiD may be a substrate-inducible enzyme in V. boronicumulans CGMCC 4969. The mechanism of transcriptional regulation of AmiD by a member of the AraC family of regulators encoded upstream of the amiD gene was preliminarily investigated. This study deepens our understanding of the mechanisms of metabolism of toxic amides in the environment, providing new ideas for microbial bioremediation.

Efficient Biodegradation of the Neonicotinoid Insecticide Flonicamid by Pseudaminobacter salicylatoxidans CGMCC 1.17248: Kinetics, Pathways, and Enzyme Properties

Nitrile-containing insecticides can be converted into their amide derivatives by Pseudaminobacter salicylatoxidans. N-(4-trifluoromethylnicotinoyl) glycinamide (TFNG-AM) is converted to 4-(trifluoromethyl) nicotinoyl glycine (TFNG) using nitrile hydratase/amidase. However, the amidase that catalyzes this bioconversion has not yet been fully elucidated. In this study, it was discovered that flonicamid (FLO) is degraded by P. salicylatoxidans into the acid metabolite TFNG via the intermediate TFNG-AM. A half-life of 18.7 h was observed for P. salicylatoxidans resting cells, which transformed 82.8% of the available FLO in 48 h. The resulting amide metabolite, TFNG-AM, was almost all converted to TFNG within 19 d. A novel amidase-encoding gene was cloned and overexpressed in Escherichia coli. The enzyme, PmsiA, hydrolyzed TFNG-AM to TFNG. Despite being categorized as a member of the amidase signature enzyme superfamily, PsmiA only shares 20-30% identity with the 14 previously identified members of this family, indicating that PsmiA represents a novel class of enzyme. Homology structural modeling and molecular docking analyses suggested that key residues Glu247 and Met242 may significantly impact the catalytic activity of PsmiA. This study contributes to our understanding of the biodegradation process of nitrile-containing insecticides and the relationship between the structure and function of metabolic enzymes.

Modulating electron density enable efficient cascade conversion from peroxymonosulfate to superoxide radical driven by electron-rich/poor dual sites

The superoxide radical (•O2-)-mediated peroxymonosulfate (PMS)-based photo-Fenton-like reaction enables highly selective water decontamination. Nevertheless, the targeted construction of •O2--mediated photo-Fenton-like system has been challenging. Herein, we developed an electron-rich/-poor dual sites driven •O2--mediated cascade photo-Fenton-like system by modulating electron density. Experimental and theoretical results demonstrated that PMS was preferentially adsorbed on electron-poor Co site. This adsorption promoted O-O bond cleavage of PMS to generate hydrogen peroxide (H2O2), which then migrated to electron-rich O site to extract eg electrons for O-H bond cleavage, rather than competing with PMS for Co site. The developed versatile cascade reaction system could selectively eliminate contaminants with low n-octanol/water partition constants (KOW) and dissociation constants (pKa) and remarkably resist inorganics (Cl-, H2PO4- and NO3-), humic acid (HA) and even real water matrices (tap water and secondary effluent). This finding provided a novel and plausible strategy to accurately and efficiently generate •O2- for the selective water decontamination.

A comprehensive study on the co-removal of Cr (VI) and ciprofloxacin via microbial-photocatalytic coupling: Mechanistic insights and performance evaluation

The increasing contamination of water systems by antibiotics and heavy metals has become a growing concern. The intimately coupled photocatalysis and biodegradation (ICPB) approach offers a promising strategy for the effective removal of mixed pollutants. Despite some prior research on ICPB applications, the mechanism by which ICPB eliminates mixed pollutants remains unclear. In our current study, the ICPB approach achieved approximately 1.53 times the degradation rate of ciprofloxacin (CIP) and roughly 1.82 times the reduction rate of Cr (VI) compared to photocatalysis. Remarkably, after 30 days, the ICPB achieved a 96.1% CIP removal rate, and a 97.8% reduction in Cr (VI). Our investigation utilized three-dimensional fluorescence analysis and photo-electrochemical characterization to unveil the synergistic effects of photocatalysis and biodegradation in removal of CIP and Cr (VI). Incorporation of B-Bi3O4Cl (B-BOC) photocatalyst facilitated electron-hole separation, leading to production of ·O2-, ·OH, and h+ species which interacted with CIP, while electrons reduced Cr (VI). Subsequently, the photocatalytic products were biodegraded by a protective biofilm. Furthermore, we observed that CIP, acting as an electron donor, promoted the reduction of Cr (VI). The microbial communities revealed that the number of bacteria favoring pollutant removal increased during ICPB operation, leading to a significant enhancement in performance.

Photocatalytic synergistic biofilms enhance tetracycline degradation and conversion

Tetracyclines are refractory pollutants that cause persistent harm to the environment and human health. Therefore, it is urgently necessary to develop methods to promote the efficient degradation and conversion of tetracyclines in wastewater. This report proposes a photobiocatalytic synergistic system involving the coupling of GeO₂/Zn-doped phosphotungstic acid hydrate/TiO₂ (GeO₂/Zn-HPW/TiO₂)-loaded photocatalytic optical hollow fibers (POHFs) and an algal-bacterial biofilm. The GeO₂/Zn-HPW/TiO₂ photocatalyst exhibits a broad absorption edge extending to 1000 nm, as well as high-efficiency photoelectric conversion and electron transfer, which allow the GeO₂/Zn-HPW/TiO₂-coated POHFs to provide high light intensity to promote biofilm growth. The resulting high photocatalytic activity rapidly and stably reduces the toxicity and increases the biodegradability of tetracycline-containing wastewater. The biofilm enriched with Salinarimonas, Coelastrella sp., and Rhizobium, maintains its activity for the rapid photocatalytic degradation and biotransformation of intermediates to generate the O₂ required for photocatalysis. Overall, the synergistic photocatalytic biofilm system developed herein provides an effective and efficient approach for the rapid degradation and conversion of water containing high concentrations of tetracycline.

A novel BC/g-C3N4 porous hydrogel carrier used in intimately coupled photocatalysis and biodegradation system for efficient removal of tetracycline hydrochloride in water

Intimately coupled photocatalysis and biodegradation (ICPB) is a promising technology to remove refractory contaminants from water. The key to successful ICPB is a carrier capable of accumulating biofilm and adhering photocatalyst firmly. Herein, BC/g-C₃N₄ was prepared into a three dimensional porous hydrogel and used as a carrier in ICPB system for the first time. Degradation experiments revealed that the removal rate of tetracycline hydrochloride (TCH) in water by the ICPB system was 96.0% after 10 h, which was significantly higher than that by the photocatalysis (PC, 76.3%), biodegradation (B, 32.5%), adsorption (AD, 17.2%), and photolysis (P, 5.0%) systems. Photo-electrochemical tests confirmed that ICPB system had superior electron transfer ability between photocatalysts and microorganisms. The removal efficiency of COD proved that microorganisms played an important role in the mineralization process of TCH by the ICPB system. After the ICPB degradation experiment, microorganisms maintained high activity and Pseudomonas, Burkholderiaceae and Flavobacterium which had TCH degradation or electron transport ability, were enriched. In conclusion, the novel ICPB carrier overcame shortcomings of the traditional ICPB carrier and the novel ICPB system had superior degradation performance for TCH. This study provided a possible method to promote the practical application of ICPB technology.

Synergistic effects of simultaneous coupling ozonation and biodegradation for coking wastewater treatment: Advances in COD removal, toxic elimination, and microbial regulation

Coking wastewater contains high concentrations of cyanide, phenols, pyridine, quinoline, and polycyclic aromatic hydrocarbons. Its high toxicity and low biodegradability leads to long hydraulic retention time of biological process and high cost of advanced oxidation process. In this study, the simultaneous combination of ozonation and biodegradation (SCOB) was proposed to treat coking wastewater. Through this process, ozonation breaks the refractory organics, and the biodegradable intermediates are rapidly mineralized by microorganisms protected by porous carriers. Thus, the performances of SCOB, individual biodegradation and ozonation systems were compared. The long-term stability of the SCOB system was evaluated, the contributions of ozonation and biodegradation were analyzed, and their synergistic mechanisms were elaborated. Results showed that biological activity was inhibited in the biodegradation system, and chemical oxygen demand (COD) removal was only 27.6% for the ozonation system. COD and total phenol removal of SCOB system reached 48.5% and 79.3%, respectively, and its kinetic degradation constant of COD was 55.6% higher than that of the ozonation system. Ozonation contributed to the oxidation of organics with unsaturated functional groups as well as soluble microbial products (SMPs), causing the effluent toxicity and chroma to decrease by 82.7% and 270 times, respectively. The higher abundances of microorganisms and functions were enriched in the core of carrier, which became dominant region for biodegradation. Consequently, COD removal of the SCOB system stabilized at >80% for real coking wastewater treatment, confirming its promising potential for the treatment of highly polluted industrial wastewater.

Combined application of microbes immobilized carbon reactor and the reactive struvite system for the management of tannery deliming wastewater

This present study investigated the removal of COD and ammoniacal nitrogen (NH₄⁺-N) from tannery deliming wastewater (TDLWW) through microbes immobilized carbon consisted a bioreactor (MICCR) and reactive struvite crystallization process. Initially, 90% of the organic content of TDLWW was removed using a MICCR reactor at 24 h retention time. Nanoporous carbon (NPC) was used as the carrier matrix for the MICCR reactor. SEM and AFM images of NPC used in the MICCR reactor identify different microorganisms on its surface. The microbial profile of NPC used in the MICCR was analyzed, and the relative abundance is phyla Firmicutes, 25.64%; Proteobacteria, 43.68%; Bacteroidetes, 6.58%; Cyanobacteria, 2.22%; Actinobacteria, 2.34% reason for organic removal. The removal of organics follows the pseudo-second-order rate kinetics with the rate constant of 1.75 × 10^-3 L COD^-1 h^-1. For the reactive struvite crystallization, MgO and Na₂HPO₄.2H₂O were taken as the precipitating agents. The optimum molar ratio for the maximum conversion of NH₄⁺-N into struvite was obtained as 1:1.4:1.4 (NH₄⁺-N:MgO:Na₂HPO₄.2H₂O). The volume of struvite precipitate was 48.5 mL/L of TDLWW, and the dry weight was 8.89 g/L. More than 93% of NH₄⁺-N was converted as the struvite fertilizer. The conversion of NH₄⁺-N into struvite follows the pseudo-first-order rate kinetics with the rate constant of 1.67 × 10^-2 min^-1. Despite the conversion of NH₄⁺-N into struvite, COD removal was observed, which confirms the conversion of organic nitrogen into struvite. The struvite was evaluated using SEM, XRD, TGA, DSC, and FT-IR spectroscopic analysis. Hence, the integrated MICCR and the reactive struvite crystallization process can be applied to manage tannery deliming wastewater.

Catalytic ozonation of sulfamethoxazole using low-cost natural silicate ore supported Fe2O3: influencing factors, reaction mechanisms and degradation pathways

A low-cost natural silicate ore supported Fe₂O₃ (FeSO) was synthesized for catalytic ozonation of sulfamethoxazole (SMX). XRD, SEM-EDS, BET, FTIR and XPS results of the FeSO catalyst confirmed that the natural silicate ore was successfully modified with iron oxide. The effects of key factors, such as catalyst dosage, initial solution pH, reaction temperature, inorganic anions and initial concentration, on ozonation degradation were systemically investigated. The degradation rate of SMX (20 mg L^-1) was 88.1% after 30 min, compared with only 35.1% SMX degradation rate in the absence of the catalyst, and the total organic carbon (TOC) removal reached 49.1% after 60 min. Reaction mechanisms revealed that surface hydroxyl groups of FeSO were a critical factor for hydroxyl radical (˙OH) production leading to fast SMX degradation in the ozone decomposition process. The degradation products were detected, and the possible pathways of SMX were then proposed. This study provides guidance for preparing a low-cost catalyst and analyzing the degradation products and pathways of SMX in the ozonation process, which is of significance in practical industrial applications.

Biofilm response and removal via the coupling of visible-light-driven photocatalysis and biodegradation in an environment of sulfamethoxazole and Cr(VI)

The widespread contamination of water systems with antibiotics and heavy metals has gained much attention. Intimately coupled visible -light-responsive photocatalysis and biodegradation (ICPB) provides a novel approach for removing such mixed pollutants. In ICPB, the photocatalysis products are biodegraded by a protected biofilm, leading to the mineralization of refractory organics. In the present study, the ICPB approach exhibited excellent photocatalytic activity and biodegradation, providing up to ∼1.27 times the degradation rate of sulfamethoxazole (SMX) and 1.16 times the Cr(VI) reduction rate of visible-light-induced photocatalysis . Three-dimensional fluorescence analysis demonstrated the synergistic ICPB effects of photocatalysis and biodegradation for removing SMX and reducing Cr(VI). In addition, the toxicity of the SMX intermediates and Cr(VI) in the ICPB process significantly decreased. The use of MoS₂/CoS₂ photocatalyst accelerated the separation of electrons and holes, with•O₂^- and h⁺ attacking SMX and e^- reducing Cr(VI), providing an effective means for enhancing the removal and mineralization of these mixed pollutants via the ICPB technique. The microbial community results demonstrate that bacteria that are conducive to pollutant removal are were enriched by the acclimation and ICPB operation processes, thus significantly improving the performance of the ICPB system.

Unraveling the key driving factors involved in cometabolism enhanced aerobic degradation of tetracycline in wastewater

Cometabolism has shown great potential in increasing the engineering feasibility of microalgae-based biotechnologies for the aerobic treatment of antibiotics-polluted wastewaters. Yet, the underlying mechanisms involved in improved microalgal performance remain unknown. In this study, we incorporated transcriptomics, gene network analysis, and enzymatic activities with cometabolic pathways of tetracycline (TC) by Chlorella pyrenoidosa to identify the key driving factors. The results demonstrated that cometabolism constructed a metabolic enzymes-photosynthetic machinery to improve the electron transport chain and activities of catalytic enzymes, which resulted in subsequent 100% removal of TC. Coupling formation dynamics of the intermediates with roles of identified metabolic enzymes, degradation of TC can be induced by de/hydroxylation, de/hydrogenation, bond-cleavage, decarboxylation, and deamination. Evaluation of 18 antibiotics' removal in reclaimed water showed cometabolism decreased the total concentrations of these antibiotics from 495.54 ng L^-1 to 221.80 ng L^-1. Our findings not only highlight the application potential of cometabolism in increasing engineering feasibility of microalgal degradation of antibiotics from wastewaters, but also provide the unique insights into unraveling the "black-box" of cometabolisms in aerobic biodegradation.

Bio-electrocatalytic degradation of tetracycline by stainless-steel mesh based molybdenum carbide electrode

In order to treat antibiotic wastewater with high efficiency and low energy consumption, this study proposed the coupling of electrocatalytic degradation and biodegradation, and explored a new modified electrocatalytic material in the coupling system. The stainless-steel mesh based molybdenum carbide (SS-Mo₂C) was prepared by a low-cost impregnation method and showed superior electrocatalytic degradation ability for tetracycline (TC) when used as the anode in the electrocatalytic system. The degradation rate of TC with SS-Mo₂C anode was 17 times higher than that of stainless-steel (SS) anode, and TC removal efficiency was 77% higher than that of SS anode. The electrocatalytic system prior to the biological reactor was proven to be the optimal coupling method. The external coupling system achieved a significantly higher TC removal (87.0%) than that of the internal coupling system (65.3%) and SS-Mo₂C showed an excellent repeatable and stable performance. The fewer and smaller molecular weight intermediates products were observed in bio-electrocatalytic system, especially in the external coupling system. Alpha diversity analysis further confirmed that bio-electrocatalytic system increased the diversity of the microbial community. The stainless-steel mesh based molybdenum carbide (SS-Mo₂C), which was prepared by a simple and low-cost impregnation method, significantly improved the electrocatalytic activity of anode, thus contributing to tetracycline removal in the bio-electrocatalytic system, especially in the external coupling system.

Historical development and prospect of intimately coupling photocatalysis and biological technology for pollutant treatment in sewage: A review

Through the synergistic effect of photocatalysis and biodegradation, intimately coupling photocatalysis and biological (ICPB) technology could improve the removal rate and mineralization rate of refractory pollutants and reduce the toxicity of intermediate products. ICPB system was characterized with the advantages of simple operation, low energy consumption and high treatment efficiency. As a new sewage treatment technology, ICPB system has shown great potential in the treatment of refractory pollutants, and has been widely concerned. In this study, the research progress of photocatalyst, carrier and biofilm in ICPB system were discussed, and the degradation mechanism was introduced. The shortcomings of the current ICPB system were pointed out, and the possible research directions of ICPB in the future were proposed. This review aimed to deepen the understanding of ICPB technology and promoted the further development of ICPB technology in the treatment of refractory pollutants.

Photocatalytic degradation of organic pollutants in water by N-doping ZnS with Zn vacancy: enhancement mechanism of visible light response and electron flow promotion

In order to improve the visible light response, N-doping ZnS (N-ZnS) nanospheres with Zn vacancy and porous surface were prepared by a simple one-pot hydrothermal method. Characterizations and density functional theory simulations showed excellent visible light response of N-ZnS. N-doping introduced impurity energy levels, which led to orbital hybridization and changed the original dipole moment. The presence of ortho Zn vacancy (O-Znv) can effectively reduce e--h+ recombination and photocorrosion. Furthermore, O-Znv caused lattice distortion (twisted the -S-Zn-N-(O-Znv)-S-Zn-S- chemical bond chain), resulting in "vacancy effect" to accelerate e- flow. Under visible light, the photocatalytic degradation efficiency of tetracycline (TC) and 2,4-dichlorophenol (2,4-DCP) was 90.31% and 60.84%, respectively. TOC degradation efficiency was 31.4% and 25.6%, respectively. Combined with Fukui index and LC-MS methods, it was found that TC and 2,4-DCP were degraded under the constant attack of active substances such as ·OH. This work can provide a reference for the application of catalytic materials in the field of visible light photocatalysis.

A Cellulose-Type Carrier for Intimate Coupling Photocatalysis and Biodegradation

Intimate coupling photocatalysis and biodegradation treatment technology is an emerging technology in the treatment of refractory organic matter, and the carrier plays an important role in this technology. In this paper, sugarcane cellulose was used as the basic skeleton, absorbent cotton was used as a reinforcing agent, anhydrous sodium sulfate was used as a pore-forming agent to prepare a cellulose porous support with good photocatalytic performance, and nano-TiO₂ was loaded onto it by a low-temperature bonding method. The results showed that the optimal preparation conditions of cellulose carriers were: cellulose mass fraction 1.0%; absorbent cotton 0.6 g; and Na₂SO₄ 60 g. The SEM, EDS and XPS characterization further indicated that the nano-TiO₂ was uniformly loaded onto the cellulose support. The degradation experiments of Rhodamine B showed that the nano-TiO₂-loaded composite supports had good photocatalytic performance. The degradation rate of 1,2,4-trichlorobenzene was more than 92% after 6 cycles, and the experiment of adhering a large number of microorganisms on the carriers before and after the reaction showed that the cellulose-based carriers obtained the required photocatalytic performance and stability, which is a good cellulose porous carrier.

Rapid degradation of Congo red wastewater by Rhodopseudomonas palustris intimately coupled carbon nanotube - Silver modified titanium dioxide photocatalytic composite with sodium alginate

With a large number of Congo red used in textiles, Congo red wastewater was not easily degraded, resulting in environmental and health-related problems. In order to improve the degradation efficiency of Congo red wastewater, A novel intimately coupled photocatalysis and biodegradation (ICPB) system was prepared by coupling Rhodopseudomonas palustris (R. Palustris), carbon nanotube - silver modified titanium dioxide photocatalytic composite (CNT-Ag -TiO₂, CAT) and sodium alginate (SA) (R. palustris/CAT@SA). Compared with immobilized CAT and R. palustris, the R. palustris/CAT@SA improved the degradation and removal rates of Congo red by 14.3% and 42.1%, and the COD removal rates by 76% and 44.6%, respectively. The mechanism of the degradation of Congo red by the new ICPB was that the Congo red on the surface of the support was degraded into long-chain alkanes by the superoxide and hydroxyl radicals of CAT product, and then the long-chain alkanes were completely mineralization by R. Palustris, which reduced the accumulation of intermediates in the photocatalysis. Most of the Congo red was adsorbed to the interior of the carrier was degraded into aromatic hydrocarbons by R. Palustris, and then oxidized and degraded by CAT, and a small part of the Congo red would be directly mineralized by R. Palustris. A novel technical solution of R. palustris/CAT@SA provided a potential application to the degradation of dye wastewater.

Spray pyrolysis synthesis and UV-driven photocatalytic activity of mesoporous Al2O3@TiO2 microspheres

Mesoporous microspheres of Al₂O₃@TiO₂ were effe ctively and rapidly prepared by the sol-spray pyrolysis (SP) method. Ultrasonic-induced droplets containing titania sol, boehmite sol, and citric acid (CA) were pyrolyzed to γ-Al₂O₃-incorporated anatase TiO₂ microspheres. The SP-derived Al₂O₃@TiO₂ microspheres exhibited higher porosity and lower bandgap energy than pure TiO₂ and commercial P25. The TiO₂ microspheres incorporated with 5 wt% amorphous γ-Al₂O₃ efficiently removed tetracycline (TC) after 60 min of pre-adsorption and 140 minutes of UV illumination (removal efficiency ~ 91%, surpassing those of pure TiO₂ and commercial P25). Introducing amorphous γ-Al₂O₃ into the anatase TiO₂ matrix created a synergetic effect that enhanced the accumulation of TC onto the catalyst surface; meanwhile, the formation of defective heterojunctions favored the separation and immigration of the photo-generated holes and electrons. In a reaction mechanism analysis, h⁺ and O₂^•‾ radicals were identified as the main instigators of TC photooxidation. Furthermore, the SP-derived Al₂O₃@TiO₂ microspheres demonstrated good stability and renewability in durability tests. The study provides a simple and scalable method for manufacturing Al₂O₃-decorated TiO₂ microspheres with improved adsorption and photocatalytic performance.

Ag-TiO2/biofilm/nitrate interface enhanced visible light-assisted biodegradation of tetracycline: The key role of nitrate as the electron accepter

Due to the pivotal role of Ag-TiO₂/biofilm/nitrate interface, enhanced visible light-assisted biodegradation of tetracycline (TC) in anoxic system was realized through both batch experiment and long-term operation in this study. The results of the batch experiment elucidated that 50 mg L^-1 TC could be completely removed within 10 h in Ag-TiO₂/biofilm/nitrate system. The continuous flow experiment was operated for 75 d to evaluate the performance and stability of Ag-TiO₂/biofilm/nitrate system. TC removal efficiency in Ag-TiO₂/biofilm/nitrate system was as high as 92.4 ± 1.6% at influent TC concentration of 50 mg L^-1 TC and hydraulic retention time (HRT) of 10 h, which would be attributed to the promoted separation of photoholes and photoelectrons at the presence of nitrate as electron acceptor. Facilitated electron transfer between semiconductor and biofilm was beneficial for enhancing TC biodegradation, thus lowering toxicity of intermediate products and promoting microbial activity. Moreover, the species related to TC biodegradation (Rhodopseudomonas, Phreatobacter and Stenotrophomonas), denitrification (Thauera) and electron transfer (Delftia) were enriched at Ag-TiO₂/biofilm/nitrate interface. Besides, a possible mechanism involved in enhanced TC degradation and nitrogen removal at Ag-TiO₂/biofilm/nitrate interface was proposed. This study provided a novel and promising strategy to enhance recalcitrant TC removal from industrial wastewater.

Self-Aggregation and Denitrifying Strains Accelerate Granulation and Enhance Denitrification

A long start-up period is one of the main factors limiting the practical application of aerobic granular sludge (AGS). Bioaugmentation could be a good strategy to accelerate aerobic granulation. In this research, four denitrifying strains were isolated from mature AGS. Mycobacterium senegalense X3-1 exhibited the strongest self-aggregation ability and good denitrification ability. Ensifer adhaerens X1 showed the strongest denitrification ability but poor self-aggregation ability. Additionally, strain X3-1 demonstrated the highest extracellular polymeric substances (EPS) contents accompanied by relatively high N-acyl-homoserine lactones (AHLs) concentrations, which could illustrate its predominant aggregation ability—AHLs produced by bacteria regulate EPS secretion to accelerate cell aggregation. Strain X3-1 and X1 were chosen as inoculated bacterium to verify the effects of bioaugmentation on AGS granulation and denitrification. Granulation was achieved in the sequential batch reactors (SBRs) added strain X3-1 10 days earlier than the control group. The particle morphology and TIN removal rate of X3-1 were both superior to the latter. The introduction of strains reduced the richness and diversity of the microbial community, but the key functional bacteria, Candidatus_Competibacter, proliferates in the SBR inoculated with X3-1. Conclusively, it is suggested Mycobacterium senegalense X31 could be a prospective strain for enhancing AGS formation and denitrification.

Recent progress in Fenton/Fenton-like reactions for the removal of antibiotics in aqueous environments

The frequent use of antibiotics allows them to enter aqueous environments via wastewater, and many types of antibiotics accumulate in the environment due to difficult degradation, causing a threat to environmental health. It is crucial to adopt effective technical means to remove antibiotics in aqueous environments. The Fenton reaction, as an effective organic pollution treatment technology, is particularly suitable for the treatment of antibiotics, and at present, it is one of the most promising advanced oxidation technologies. Specifically, rapid Fenton oxidation, which features high removal efficiency, thorough reactions, negligible secondary pollution, etc., has led to many studies on using the Fenton reaction to degrade antibiotics. This paper summarizes recent progress on the removal of antibiotics in aqueous environments by Fenton and Fenton-like reactions. First, the applications of various Fenton and Fenton-like oxidation technologies to the removal of antibiotics are summarized; then, the advantages and disadvantages of these technologies are further summarized. Compared with Fenton oxidation, Fenton-like oxidations exhibit milder reaction conditions, wider application ranges, great reduction in economic costs, and great improved cycle times, in addition to simple and easy recycling of the catalyst. Finally, based on the above analysis, we discuss the potential for the removal of antibiotics under different application scenarios. This review will enable the selection of a suitable Fenton system to treat antibiotics according to practical conditions and will also aid the development of more advanced Fenton technologies for removing antibiotics and other organic pollutants.

Insight into integration of photocatalytic and microbial wastewater treatment technologies for recalcitrant organic pollutants: From sequential to simultaneous reactions

The more and more stringent environmental standards for recalcitrant organic pollutants pushed forward the development of integration of photocatalytic and microbial wastewater treatment technologies. The past studies proposed mainly two typical integration ways: a) Independent sequence of photocatalysis and biodegradation (ISPB) conducting the sequential reactions; b) Intimate coupling of photocatalysis and biodegradation (ICPB) conducting the simultaneous reactions. Although ICPB has received more attraction recently due to its novelty, ISPB gives an edge in certain cases. The article reviews the state-of-the-art ISPB and ICPB studies to comprehensively compare the two systems. The strengths and weaknesses of ISPB and ICPB regarding the treatment efficiency, cost, toxicity endurance and flexibility are contradistinguished. The reactor set-ups, photocatalysts, microbial characteristics of ISPB and ICPB are summarized. The applications for different kinds of recalcitrant compounds are elaborated to give a holistic view of the removal efficiencies and transformation pathways by the two technologies. Currently, in-depth understandings about the interference among mixed pollutants, co-existing components and key parameters in realistic wastewater are urgently needed. The long-term and large-scale application cases of the integration technologies are still rare. Overall, we conclude that both ISPB and ICPB technologies are reaching maturity while challenges still exist for two systems especially regarding the reliability, economy and generalization for realistic wastewater treatment plants. Future research should not only manage to reduce the cost and energy consumption by upgrading reactors and developing novel catalysts, but also attach importance to the cocktail effects of wastewater during the sequential or simultaneous photocatalysis and biodegradation.

A two-stage degradation coupling photocatalysis to microalgae enhances the mineralization of enrofloxacin

The coupling of photocatalytic and algal processes has been used for the removal of widespread antibiotics. The removal capacities of the individual and the combined system against enrofloxacin were tested and compared in this work. Due to the low tolerance of the algae to enrofloxacin, the target compound was barely degraded during the individual algal treatment. In the individual photocatalytic process, the mineralization efficiency (defined as the ratio between the produced carbon dioxide and the initial) reached ∼57% with the remaining formed as transformation products. In contrast, a two-stage treatment incorporating photocatalytic and algal processes removed enrofloxacin completely and increased the mineralization efficiency to ∼64% or more. The addition of the citric acid as external co-substrate further elevated the mineralization efficiency with a factor of 1.25 compared to that of the individual photocatalysis. Different degradation products in both individual and integrated processes were identified and compared. The degradation pathways were found to involve the attack of the piperazine moiety and quinolone core. The results indicated the potential application of the combined photocatalytic-algal treatment in removal of veterinary antibiotics and improved our understanding of the underlying mechanisms and pathways.

Synergistic degradation for o-chlorophenol and enhancement of power generation by a coupled photocatalytic-microbial fuel cell system

A hierarchically photocatalytic microbial fuel cell system (PMFC) coupled with TiO₂ photoanode and bioanode was established to enhance the power generation based on single-chamber MFC. Compared with the conventional anaerobic mode, oxygen in the solution could be utilized by the photoanode of PMFC to improve the removal of o-chlorophenol (2-CP). The maximum power densities were increasing from 261 (MFC) to 301 mW/m² (PMFC). The removal efficiency of 2-CP (5 mg/L) in PMFC was 76.20% and higher than that in MFC (19.33%) and by photocatalysis (49.23%). The electron-hole separation efficiencies were decreasing with the increasing of dissolved oxygen, causing a low efficiency of photocatalysis, due to the reduction of the current density of the systems. The abundance of Geobacter sp., PHOS-HE36 fam., and Pseudomonas sp. was increased with illumination, contributing to improve the electricity production and 2-CP degradation. The only detective intermediate of 1,2-dichlorobenzene in PMFC indicated that the microbes could regulate the degradation pathway of 2-CP in the coupling system. These findings provided an feasible method for the effective degradation of refractory organic compounds and simultaneous energy recovery by combining photocatalysis and microbial power generation.

Improving Wastewater Treatment by Triboelectric-Photo/Electric Coupling Effect

The ability to meet higher effluent quality requirements and the reduction of energy consumption are the biggest challenges in wastewater treatment worldwide. A large proportion of the energy generated during wastewater treatment processes is neglected and lost in traditional wastewater treatment plants. As a type of energy harvesting system, triboelectric nanogenerators (TENGs) can extensively harvest the microscale energies generated from wastewater treatment procedures and auxiliary devices. This harvested energy can be utilized to improve the removal efficiency of pollutants through photo/electric catalysis, which has considerable potential application value in wastewater treatment plants. This paper gives an overall review of the generated potential energies (e.g., water wave energy, wind energy, and acoustic energy) that can be harvested at various stages of the wastewater treatment process and introduces the application of TENG devices for the collection of these neglected energies during wastewater treatment. Furthermore, the mechanisms and catalytic performances of TENGs coupled with photo/electric catalysis (e.g., electrocatalysis, photoelectric catalysis) are discussed to realize higher pollutant removal efficiencies and lower energy consumption. Then, a thorough, detailed investigation of TENG devices, electrode materials, and their coupled applications is summarized. Finally, the intimate coupling of self-powered photoelectric catalysis and biodegradation is proposed to further improve removal efficiencies in wastewater treatment. This concept is conducive to improving knowledge about the underlying mechanisms and extending applications of TENGs in wastewater treatment to better solve the problems of energy demand in the future.

Enhanced bio-photodegradation of p-chlorophenol by CdS/g-C3N4 3D semiconductor-microbe interfaces

p-chlorophenol (p-CP), one of the highly toxic chlorinated organic compounds, is recalcitrant in conventional biodegradation process. This study reported a synergistic degradation protocol of 3D semiconductor-microbe interfaces, in which graphite felts (GF) and CdS/g-C₃N₄ nanocomposites were chosen as the carrier and semiconductor for enhanced p-CP degradation. Based on microstructure, photoelectrochemical and degradation performance analysis, the optimal CdS content in CdS/g-C₃N₄ nanocomposites was 10 wt%. The efficiencies of p-CP and TOC removal in bio-photodegradation system were as high as 95% and 77% without extra electron acceptors/donors, which were far better than those in traditional photodegradation and biodegradation system. High-throughput sequencing analysis suggested that p-CP degradation related species (Chryseobacterium, Stenotrophomonas and Rhodopseudomonas), electroactive species (Chryseobacterium, Stenotrophomonas, Hydrogenophaga and Cupriavidus) and hydrogen-utilizing species (Hydrogenophaga and Cupriavidus) were enriched at 3D semiconductor-microbe interfaces. The enrichment of functional species played a crucial role for p-CP removal and mineralization at 3D semiconductor-microbe interfaces. Moreover, the mechanism of enhanced p-CP bio-photodegradation at 3D semiconductor-microbe interfaces was investigated by utilizing Phylogenetic Investigation of Communities by Reconstruction of Unobserved States 2 (PICRUSt2). The results showed that the genes involved in p-CP biodegradation, hydrogen metabolism and extracellular electron transfer were remarkably enriched. Possible mechanism for enhancement of p-CP degradation in bio-photodegradation system was proposed, in which photocatalytic H₂ and photoelectron transfer played an important role for enhancing p-CP mineralization by microbes. 3D semiconductor-microbe interfaces could maintain excellent performance for p-CP degradation after long-term operation, which provide a potential alternative for the enhanced treatment of wastewater containing p-CP.

Photocatalytic Material–Microbe Hybrids: Applications in Environmental Remediations

Environmental pollution has become one of the most urgent global issues that we have to face now. Searching new technologies to solve environmental issues is of great significance. By intimately coupling photocatalytic materials with microbes, the emerging photocatalytic material–microbe hybrid (PMH) system takes advantages of the high-efficiency, broad-spectrum light capture capability of the photocatalytic material and the selectivity of microbial enzymatic catalysis to efficiently convert solar energy into chemical energy. The PMH system is originally applied for the solar-to-chemical production. Interestingly, recent studies demonstrate that this system also has great potential in treating environmental contaminations. The photogenerated electrons produced by the PMH system can reductively decompose organic pollutants with oxidative nature (e.g., refractory azo dyes) under anaerobic circumstances. Moreover, based on the redox reactions occurring on the surface of photocatalysts and the enzymatic reactions in microbes, the PMH system can convert the valences of multiple heavy metal ions into less toxic or even nontoxic status simultaneously. In this review, we introduce the recent advances of using the PMH system in treating environmental pollutions and compare this system with another similar system, the traditional intimately coupled photocatalysis and biodegradation (ICPB) system. Finally, the current challenges and future directions in this field are discussed as well.

Propelling the practical application of the intimate coupling of photocatalysis and biodegradation system: System amelioration, environmental influences and analytical strategies

The intimate coupling of photocatalysis and biodegradation (ICPB) possesses an enhanced ability of recalcitrant contaminant removal and energy generation, owing to the compact communication between biotic components and photocatalysts during the system operation. The photocatalysts in the ICPB system could dispose of noxious contaminants to relieve the external pressure on microorganisms which could realize the mineralization of the photocatalytic degradation products. However, due to the complex components in the composite system, the mechanism of the ICPB system has not been completely understood. Moreover, the variable environmental conditions would play a significant role in the ICPB system performance. The further development of the ICPB scheme requires clarification on how to reach an accurate understanding of the system condition during the practical application. This review starts by offering detailed information on the system construction and recent progress in the system components' amelioration. We then describe the potential influences of relevant environmental factors on the system performance, and the analytical strategies applicable for comprehending the critical processes during the system operation are further summarized. Finally, we put forward the research gaps in the current system and envision the system's prospective application. This review provides a valuable reference for future researches that are devoted to assessing the environmental disturbance and exploring the reaction mechanisms during the practical application of the ICPB system.

Could co-substrate sodium acetate simultaneously promote Chlorella to degrade amoxicillin and produce bioresources?

Integrating microalgae culture and wastewater purification is a promising technology for sustainable bioresource production. However, the challenge is that toxins in wastewater usually limit risk elimination and cause poor bioresource production. Easy-to-biodegrade substrates could alleviate the resistant stress on a bacterial community but we know little about how they function with microalgae. In this study, we tested if Easy-to-biodegrade substrates could simultaneously promote Chlorella to degrade antibiotic amoxicillin (AMO) and produce bioresources. Sodium acetate (NaAC) was used as the representative co-substrate. The results showed NaAC could enhance AMO removal by 76%. The β-lactam structure was destroyed and detoxified to small molecules, due to the up-regulation of hydrolase, oxidoreductase, reductase, and transferase. Chlorella biomass production increased by 36%. The genes encoding the glutathione metabolism and peroxisome pathways were significantly up-regulated to alleviate the antibiotic stress, and the DNA replication pathway was activated. As a result, the production of lipid, carbohydrate, and protein was enhanced by 61%, 122%, and 34%, respectively. This study provides new insights for using microalgae to recover bioresources from toxic wastewater and reveals the critical underlying mechanisms.

Biodegradation of the pyridinecarboxamide insecticide flonicamid by Microvirga flocculans and characterization of two novel amidases involved

Flonicamid (N-cyanomethyl-4-trifluoromethylnicotinamide, FLO) is a new type of pyridinecarboxamide insecticide that exhibits particularly good efficacy in pest control. However, the extensive use of FLO in agricultural production poses environmental risks. Hence, its environmental behavior and degradation mechanism have received increasing attention. Microvirga flocculans CGMCC 1.16731 rapidly degrades FLO to produce the intermediate N-(4-trifluoromethylnicotinoyl) glycinamide (TFNG-AM) and the end acid metabolite 4-(trifluoromethyl) nicotinol glycine (TFNG). This bioconversion is mediated by the nitrile hydratase/amidase system; however, the amidase that is responsible for the conversion of TFNG-AM to TFNG has not yet been reported. Here, gene cloning, overexpression in Escherichia coli and characterization of pure enzymes showed that two amidases-AmiA and AmiB-hydrolyzed TFNG-AM to TFNG. AmiA and AmiB showed only 20-30% identity to experimentally characterized amidase signature family members, and represent novel amidases. Compared with AmiA, AmiB was more sensitive to silver and copper ions but more resistant to organic solvents. Both enzymes demonstrated good pH tolerance and exhibited broad amide substrate specificity. Homology modeling suggested that residues Asp191 and Ser195 may strongly affect the catalytic activity of AmiA and AmiB, respectively. The present study furthers our understanding of the enzymatic mechanisms of biodegradation of nitrile-containing insecticides and may aid in the development of a bioremediation agent for FLO.

Biodegradation of flonicamid by Ensifer adhaerens CGMCC 6315 and enzymatic characterization of the nitrile hydratases involved

BACKGROUND

Flonicamid (N-cyanomethyl-4-trifluoromethylnicotinamide, FLO) is a new type of pyridinamide insecticide that regulates insect growth. Because of its wide application in agricultural production and high solubility in water, it poses potential risks to aquatic environments and food chain.

RESULTS

In the present study, Ensifer adhaerens CGMCC 6315 was shown to efficiently transform FLO into N-(4-trifluoromethylnicotinoyl) glycinamide (TFNG-AM) via a hydration pathway mediated by two nitrile hydratases, PnhA and CnhA. In pure culture, resting cells of E. adhaerens CGMCC 6315 degraded 92% of 0.87 mmol/L FLO within 24 h at 30 °C (half-life 7.4 h). Both free and immobilized (by gel beads, using calcium alginate as a carrier) E. adhaerens CGMCC 6315 cells effectively degraded FLO in surface water. PnhA has, to our knowledge, the highest reported degradation activity toward FLO, Vmax = 88.7 U/mg (Km = 2.96 mmol/L). Addition of copper ions could increase the enzyme activity of CnhA toward FLO by 4.2-fold. Structural homology modeling indicated that residue β-Glu56 may be important for the observed significant difference in enzyme activity between PnhA and CnhA.

CONCLUSIONS

Application of E. adhaerens may be a good strategy for bioremediation of FLO in surface water. This work furthers our understanding of the enzymatic mechanisms of biodegradation of nitrile-containing insecticides and provides effective transformation strategies for microbial remediation of FLO contamination.

Tetracyclines in the environment: An overview on the occurrence, fate, toxicity, detection, removal methods, and sludge management

Tetracyclines (TCs) are a group of broad-spectrum antibiotics having vast human, veterinary, and aquaculture applications. The continuous release of TCs residues into the environment and the inadequate removal through the conventional treatment systems result in its prevalent occurrence in soil, surface water, groundwater, and even in drinking water. As aqueous TCs contamination is the tip of the iceberg, and TCs possess good sorption capacity towards soil, sediments, sludge, and manure, it is insufficient to rely on the sorptive removal in the conventional water treatment plants. The severity of the TCs contamination is evident from the emergence of TCs resistance in a wide variety of microorganisms. This paper reviews the recent research on the TCs occurrence in the environmental matrices, fate in natural systems, toxic effects, and the removal methods. The high performance liquid chromatography (HPLC) determination of TCs in environmental samples and the associated technology developments are analyzed. The benefits and limitations of biochemical and physicochemical removal processes are also discussed. This work draws attention to the inevitability of proper TC sludge management. This paper also gives insight into the limitations of TCs related research and the future scope of research in environmental contamination by TCs residues.

Simultaneous elimination of amoxicillin and antibiotic resistance genes in activated sludge process: Contributions of easy-to-biodegrade food

Antibiotics are continuously released into aquatic environments and ecosystems where they accumulate, which increases risks from the transmission of antibiotic resistance genes (ARGs). However, it is difficult to completely remove antibiotics by conventional biological methods, and during such treatment, ARGs may spread via the activated sludge process. Easy-to-biodegrade food have been reported to improve the removal of toxic pollutants, and therefore, this study investigated whether such co-substrates may also decrease the abundance of ARGs and their transferal. This study investigated amoxicillin (AMO) degradation using 0-100 mg/L acetate sodium as co-substrate in a sequencing biological reactor. Proteobacteria, Bacteroidetes, and Actinobacteria were identified as dominant phyla for AMO removal and mineralization. Furthermore, acetate addition increased the abundances of adeF and mdsC as efflux resistance genes, which improved microbial resistance, the coping ability of AMO toxicity, and the repair of the damage from AMO. As a result, acetate addition contributed to almost 100% AMO removal and stabilized the chemical oxygen demand (~20 mg/L) in effluents when the influent AMO fluctuated from 20 to 100 mg/L. Moreover, the total abundance of ARGs decreased by approximately ~30%, and the proportion of the most dominant antibiotic resistance bacteria Proteobacteria decreased by ~9%. The total abundance of plasmids that encode ARGs decreased by as much as ~30%, implying that the ARG spreading risks were alleviated. In summary, easy-to-biodegrade food contributed to the simultaneous elimination of antibiotics and ARGs in an activated sludge process.

Biodegradation of tetracycline using hybrid material (UCPs-TiO2) coupled with biofilms under visible light

To develop a more green and effective method for tetracycline (TC) removal, a hybrid material (conversion phosphors-TiO₂, UCPs-TiO₂) was coupled with a biofilm to achieve enhanced removal of TC. The removal of TC by biofilm coupled with UCPs-TiO₂ under visible light reached 82%, which was 35% higher than that in treatment using only the biofilm. Extracellular polymeric substance (EPS) promoted the production of hydroxyl radicals by UCPs-TiO₂, as the EPS acted as an electron transfer medium and accelerated the TC mineralization. Biofilm in the coupled system tolerated TC stress by regulating its antibiotic resistance genes (ARG) and superoxidedismutase (SOD), and allowed it to maintain stable and efficient removal of TC. This study documents a method to couple a hybrid material with microbial aggregates, creating a promising system for removing refractory organics, such as TC, from water. The study also offers insight into the mechanisms underlying TC removal by microbial aggregates combined with new functional materials.

Interaction between tetracycline and microorganisms during wastewater treatment: A review

Tetracycline (TC) is a commonly used human and veterinary antibiotic that is mostly discharged into wastewater in the form of the parent compounds. At present, wastewater treatment plants (WWTPs) use activated sludge processes that are not specifically designed to remove such pollutants. Considering the biological toxicity of TC in aquatic environment, the migration and fate of TC in the process of wastewater treatment deserve attention. This paper reviews the influence of TC on the functional bacteria in the sludge matrix and the development of tetracycline-resistant genes, and also discusses their adsorption removal rates, their adsorption kinetics and adsorption isotherm models, and infers their adsorption mechanism. In addition, the biodegradation of TC in the process of biological treatment is reviewed. Co-metabolism and the role of dominant bacteria in the degradation process are described, along with the formation of degradation byproducts and their toxicity. Furthermore, the current popular integrated coupling-system for TC degradation is also introduced. This paper systematically introduces the interaction between TC and activated sludge in WWTPs. The review concludes by providing directions to address research and knowledge gaps in TC removal from wastewater.

Degradation of organic pollutants by intimately coupling photocatalytic materials with microbes: a review

With the rapid development of industry and agriculture, large amounts of organic pollutants have been released into the environment. Consequently, the degradation of refractory organic pollutants has become one of the toughest challenges in remediation. To solve this problem, intimate coupling of photocatalysis and biodegradation (ICPB) technology, which allows the simultaneous action of photocatalysis and biodegradation and thus integrates the advantages of photocatalytic reactions and biological treatments, was developed recently. ICPB consists mainly of porous carriers, photocatalysts, biofilms, and an illuminated reactor. Under illumination, photocatalysts on the surface of the carriers convert refractory pollutants into biodegradable products through photocatalytic reactions, after which these products are completely degraded by the biofilms cultivated in the carriers. Additionally, the biofilms are protected by the carriers from the harmful light and free radicals generated by the photocatalyst. Compared with traditional technologies, ICPB remarkably improves the degradation efficiency and reduces the cost of bioremediation. In this review, we introduce the origin and mechanisms of ICPB, discuss the development of reactors, carriers, photocatalysts, and biofilms used in ICPB, and summarize the applications of ICPB to treat organic pollutants. Finally, gaps in this research as well as future perspectives are discussed.

Occurrence, fate, and risk assessment of typical tetracycline antibiotics in the aquatic environment: A review

Tetracyclines (TCs), used as human and veterinary medicines, are the most widely used antibiotics. More than 75% of TCs are excreted in an active form and released into the environment through human and animal urine and feces, causing adverse effects on the ecological system and human health. Few articles review the environmental occurrence and behaviors of TCs, as well as their risks and toxicities. Here, we comprehensively summarized the recent advances on the following important issues: (1) Environmental occurrence of TCs. TCs are used globally and their occurrence in the aquatic environment has been documented, including surface water, groundwater, drinking water, wastewater, sediment, and sludge. (2) Environmental behaviors of TCs, particularly the fate of TCs in wastewater treatment plants (WWTPs). Most WWTPs cannot effectively remove TCs from wastewater, so alternative methods for efficient removal of TCs need to be developed. The latest degradation methods of TCs are summarized, including adsorption, photocatalytic, photochemical and electrochemical, and biological degradations. (3) Toxicities and possible risks of TCs. The toxicological data of TCs indicate that several TCs are more toxic to algae than fish and daphnia. Risk assessments based on individual compound exposure indicate that the risks arising from the current concentrations of TCs in the aquatic environment cannot be ignored.

Using easy-to-biodegrade co-substrate to eliminate microcystin toxic on electrochemically active bacteria and enhance bioelectricity generation from cyanobacteria biomass

Cyanobacterial biomass is a promising natural resource for power generation, through the reactions bio-catalyzed by electrochemically active bacteria (EAB). However, the major limitation is the involvement of Microcystin-LR (MC-LR) in inhibiting EAB activation. In this work, toxic M. aeruginosa biomass was employed as analyte of a microbial fuel cell (MFC), and sodium acetate was applied as easy-to-biodegrade co-substrate to alleviate the MC-LR stress on EAB survival. The running stability was continuously enhanced with the increment of co-substrate concentration. The sufficient co-substrate supply (6.0 mM) eliminated the negative effects of MC-LR on the cyanobacteria biomass fed-MFC performance; it contributed 12.7% extension on the electric cyclic terms and caused the productions of the power density which was comparable and even 3.8% higher than its corresponding control (MFC treated with acetate alone). The co-substrate addition also increased coulombic efficiency by 60.1%, microcystin-LR removal efficiency increased by 64.7%, and diversified the microbial community with more species able to biodegrade the MC-LR, bio-transforming the metabolites and EAB. Microcystin-degrading bacteria, such as Sphingopyxis sp., Burkholderia-Paraburkholderia, and Bacillus sp., were remarkably increased, and EAB, including Shewanella sp., Desulfovibrio desulfuricans, Aeromonas hydrophila, were also much more enriched in co-substrate use protocol. Therefore, this study verified a co-substrate strategy for simultaneously eliminating MC-LR toxin and enhancing bioelectricity generation from cyanobacterial biomass via an MFC.

Rapidly and highly efficient degradation of tetracycline hydrochloride in wastewater by 3D IO-TiO2-CdS nanocomposite under visible light

Tetracycline hydrochloride as an environmental pollutant is biologically toxic and highly difficult to degrade. To solve this problem, an efficient catalyst IO-TiO₂-CdS composite with honeycomb-like three-dimensional (3D) inverse opal TiO₂ (IO-TiO₂) and cadmium sulphide (CdS) was synthesized and applied in the degradation of tetracycline hydrochloride in this paper. More than 99% of the tetracycline hydrochloride (30 mg/L) can be degraded by IO-TiO₂-CdS (30 mg) within 20 min under visible light irradiation. Surprisingly, the naphthol rings can be opened and degraded to alkane with a minimum molecular weight of 60, which is the smallest fragment among all publications. The three-dimensional ordered macroporous (3DOM) structure of IO-TiO₂ improves the utilization of light via the slow photon effect. Meanwhile, the addition of CdS enhances the degradation efficiency of tetracycline by broadening the range of absorption spectrum and improving the separation of charge carrier on the catalyst. In addition to the degradation of tetracycline hydrochloride, IO-TiO₂-CdS also shows a good degradation efficiency of Rhodamine B (RhB). This work provides a promising approach to construct visible light response photocatalysts with non-noble metal for efficient degradation of wastewater pollutants.

The intimate coupling of photocatalysis and biodegradation for the degradation and mineralization of atrazine in water

A Bi₂WO₆/CN heterojunction can produce active species to break atrazine into biodegradable intermediates, which are quickly mineralized by biofilms.