Enhancing solar disinfection (SODIS) with the photo-Fenton or the Fe2+/peroxymonosulfate-activation process in large-scale plastic bottles leads to toxicologically safe drinking water

SODIS with hydrogen peroxide: an effective household water treatment option under sub-tropical climatic conditions of bangladesh

Solar disinfection (SODIS) is an affordable and sustainable Household Water Treatment (HWT) method endorsed by WHO. However, its limitations include longer sunlight exposure requirements, incomplete microbial inactivation, and post-SODIS microbial regrowth during monsoon and winter seasons in subtropical climates. To address these limitations, the performance of SODIS with H2O2 for microbial inactivation during the monsoon and winter seasons in Bangladesh was evaluated following the WHO HWT protocols. Moreover, the process was verified using drinking water samples collected from restaurants, households, and slums. All SODIS experiments were conducted using reflective reactors with PET bottles and plastic bags, adding 10 mg/L of H2O2, and exposing them to sunlight for 6 h. The results showed that E. coli was completely inactivated within 2 h in plastic bags and within 3 h in PET bottles during the monsoon season, achieving an LRV of > 5. In winter, both achieved an LRV > 5 within 3 h and plastic bags showed more efficient in microbial inactivation than PET bottles. The microbial inactivation rates were 5 times higher than those of conventional SODIS. No regrowth of microorganisms was observed during the subsequent post-SODIS period of 12 h and 24 h at room temperature. The study findings suggest that SODIS with H2O2 has the potential for complete microorganism inactivation with shorter sunlight exposure in subtropical climates with moderate to low solar irradiation and can be adopted as a reliable disinfection option for rural and urban communities with unsafe drinking water supply.

Acids from fruits generate photoactive Fe-complexes, enhancing solar disinfection of water (SODIS): A systematic study of the novel "fruto-Fenton" process, effective over a wide pH range (4 - 9)

This study aimed to enhance solar disinfection (SODIS) by the photo-Fenton process, operated at natural pH, through the re-utilization of fruit wastes. For this purpose, pure organic acids present in fruits and alimentary wastes were tested and compared with synthetic complexing agents. Owing to solar light, complexes between iron and artificial or natural chelators can be regenerated through ligand-to-metal charge transfer (LMCT) during disinfection. The target complexes were photoactive under solar light, and the Fe:Ligand ratios for ex situ prepared iron complexes were assessed, achieving a balance between iron solubilization and competition with bacteria as a target for oxidizing species. In addition, waste extracts containing natural acidic ligands were an excellent raw material for our disinfection enhancement purposes. Indeed, lemon and orange juice or their peel infusions turned out to be more efficient than commercially available organic acids, leading to complete inactivation in less than 1 h by this novel "fruto-Fenton" process, i.e. in the presence of a fruit-derived ligand, Fe(II) and H2O2. Finally, its application in Lake Leman water and in situ complex generation led to effective bacterial inactivation, even in mildly alkaline surface waters. This work proposes interesting SODIS and fruit-mediated photo-Fenton enhancements for bacterial inactivation in resource-poor contexts and/or under the prism of circular economy.

Efficient and sustainable photocatalytic inactivation of E. coli by an innovative immobilized Ag/TiO2 photocatalyst with peroxymonosulfate (PMS) under visible light

A novel catalytic system for effective photocatalytic inactivation of Escherichia coli (E. coli) was constructed by anchoring Ag nanoparticles (AgNPs) on silane coupling agent (SCA) pretreated TiO2 nano-tube arrays (Ag/SCA/TiO2NTAs). Morphology and structural analyses revealed that SCA could disperse AgNPs evenly on TiO2NTAs, thus inducing a superior surface plasmon resonance (SPR) effect. Ag/SCA/TiO2NTAs catalyst exhibited excellent inactivation performance when in the presence of peroxymonosulfate (PMS) and visible light (VL), with 6-log E. coli was completely inactivated within 60 min, which was 5.3, 12.5 and 13.2 times higher than that of Ag/SCA/TiO2NTAs/VL, PMS/VL and Ag/SCA/TiO2NTAs/PMS/dark systems, respectively. Additionally, the photocatalyst exhibited a highly reusable property, with the inactivation performance almost unchanged after ten cycles of uses with minimal Ag leaching. The inactivation mechanism analysis demonstrated that both radical (SO4•-, OH) and non-radical (h+, 1O2) pathways involved in E. coli inactivation, and SCA played a pivotal role in the production of reactive species. Chloride ions (Cl-) greatly enhanced the inactivation efficiency, while bicarbonate (HCO3-) and phosphate (H2PO4-) showed an inhibitory effect. Humic acid (HA) displayed a dual effect on inactivation performance, where the low concentration of HA facilitated the bacteria inactivation, while the higher dose suppressed bacteria inactivation. Moreover, the system exhibited excellent inactivation performance in tap water. This work first used SCA as the binder to fix AgNPs on TiO2NTAs for VL photocatalytic inactivation of bacteria with the assistance of PMS, which was expected to provide some insights into the practical treatment of drinking water.

Enhanced photo-Fenton degradation of tetracycline hydrochloride by 2, 5-dioxido-1, 4-benzenedicarboxylate-functionalized MIL-100(Fe)

Heterogeneous photo-Fenton technology has drawn tremendous attention for removal of recalcitrant pollutants. Fe-based metal-organic frameworks (Fe-MOFs) are regarded to be superior candidates in wastewater treatment technology. However, the central metal sites of the MOFs are coordinated with the linkers, which reduces active site exposure and decelerates H₂O₂ activation. In this study, a series of 2, 5-dioxido-1, 4-benzenedicarboxylate (H₂DOBDC)-functionalized MIL-100(Fe) with enhanced degradation performance was successfully constructed via solvothermal strategy. The modified MIL-100(Fe) displayed an improvement in photo-Fenton behaviors. The photocatalytic rate constant of optimized MIL-100(Fe)-1/2/3 are 2.3, 3.6 and 4.4 times higher compared with the original MIL-100(Fe). The introduced H₂DOBDC accelerates the separation and transfer in photo-induced charges and promotes Fe(II)/Fe(III) cycle, thus improving the performance. •OH and •O₂^- are main reactive radicals in tetracycline (TCH) degradation. Dealkylation, hydroxylation, dehydration and dealdehyding are the main pathways for TCH degradation.

Identifying the mediators of intracellular E. coli inactivation under UVA light: The (photo) Fenton process and singlet oxygen

Solar disinfection (SODIS) was probed for its underlying mechanism. When Escherichia coli was exposed to UVA irradiation, the dominant solar fraction acting in SODIS process, cells exhibited a shoulder before death ensued. This profile resembles cell killing by hydrogen peroxide (H2O2). Indeed, the use of specialized strains revealed that UVA exposure triggers intracellular H2O2 formation. The resultant H2O2 stress was especially impactful because UVA also inactivated the processes that degrade H2O2-peroxidases through the suppression of metabolism, and catalases through direct enzyme damage. Cell killing was enhanced when water was replaced with D2O, suggesting that singlet oxygen plays a role, possibly as a precursor to H2O2 and/or as the mediator of catalase damage. UVA was especially toxic to mutants lacking miniferritin (dps) or recombinational DNA repair (recA) enzymes, indicating that reactions between ferrous iron and UVA-generated H2O2 lead to lethal DNA damage. Importantly, experiments showed that the intracellular accumulation of H2O2 alone is insufficient to kill cells; therefore, UVA must do something more to enable death. A possibility is that UVA stimulates the reduction of intracellular ferric iron to its ferrous form, either by stimulating O2•- formation or by generating photoexcited electron donors. These observations and methods open the door to follow-up experiments that can probe the mechanisms of H2O2 formation, catalase inactivation, and iron reduction. Of immediate utility, the data highlight the intracellular pathways formed under UVA light during SODIS, and that the presence of micromolar iron accelerates the rate at which radiation disinfects water.

A modified flower pollen-based photothermocatalytic process for enhanced solar water disinfection: Photoelectric effect and bactericidal mechanisms

Solar disinfection (SODIS) is regarded as an affordable and effective point-of-use (POU) water disinfection treatment urgently needed in rural developing world. This work developed an enhanced SODIS scheme that utilized a novel flower pollen-based catalyst (Te-TRP). The bench-scale experiments demonstrated 100% photothermocatalytic inactivation of approximately 7-log E. coli K-12, Spingopyxis sp. BM1-1, or S. aureus bacterium by Te-TRP within 40-60 min. Moving toward practical device design, we constructed a flow-through reactor and demonstrated the outstanding water disinfection performance of Te-TRP. The in-depth mechanistic study revealed the synergetic effect between photocatalysis and photothermal conversion and identified the bacterial inactivation pathway. ¹O₂ and ·O₂^¯ were verified to be the dominant reactive oxygen species involved in the bacterial inactivation. The damage to bacterial cells caused by photothermocatalytic reactions was systematically investigated, demonstrating the cell membrane destruction, the loss of enzyme activity, the increased cell membrane permeability, and the complete inactivation of bacteria without the viable but nonculturable state cells. This work not only affords a facile approach to preparing biomaterial-based catalysts capable of efficient photothermocatalytic bacterial inactivation, but also proposes a prototype of POU water treatment, opening up an avenue for sustainable environmental remediation.

Does light-based tertiary treatment prevent the spread of antibiotic resistance genes? Performance, regrowth and future direction

The common occurrence of antibiotic-resistance genes (ARGs) originating from pathogenic and facultative pathogenic bacteria pose a high risk to aquatic environments. Low removal of ARGs in conventional wastewater treatment processes and horizontal dissemination of resistance genes between environmental bacteria and human pathogens have made antibiotic resistance evolution a complex global health issue. The phenomenon of regrowth of bacteria after disinfection raised some concerns regarding the long-lasting safety of treated waters. Despite the inactivation of living antibiotic-resistant bacteria (ARB), the possibility of transferring intact and liberated DNA containing ARGs remains. A step in this direction would be to apply new types of disinfection methods addressing this issue in detail, such as light-based advanced oxidation, that potentially enhance the effect of direct light interaction with DNA. This study is devoted to comprehensively and critically review the current state-of-art for light-driven disinfection. The main focus of the article is to provide an insight into the different photochemical disinfection methods currently being studied worldwide with respect to ARGs removal as an alternative to conventional methods. The systematic comparison of UV/chlorination, UV/H₂O₂, sulfate radical based-AOPs, photocatalytic processes and photoFenton considering their mode of action on molecular level, operational parameters of the processes, and overall efficiency of removal of ARGs is presented. An in-depth discussion of different light-dependent inactivation pathways, influence of DBP and DOM on ARG removal and the potential bacterial regrowth after treatment is presented. Based on presented revision the risk of ARG transfer from reactivated bacteria has been evaluated, leading to a future direction for research addressing the challenges of light-based disinfection technologies.

Revealing the enhancing mechanisms of Fe-Cu bimetallic catalysts for the Fenton-like degradation of phenol

To develop a heterogeneous Fenton-like catalyst with desirable activity and reusability remains a great challenge for the practical degradation of environmental remediation. Herein, we demonstrate a dendritic Fe-Cu bimetallic catalyst consisted of a Cu/Fe₃O₄ shell and a FeCu core (E100). In comparisons of single Cu, Fe and Fe₃O₄, E100 performs far better performance for the Fenton-like degradation of phenol, and its dominant Fenton-like active centers are Fe species under acidic pH or Cu species under neutral pH. Particularly, Cu-based Fenton-like reactions are greatly accelerated by galvanic micro-cells effects that come from the special co-existence of Cu/Fe₃O₄ shell, and subsequently, owing to the Cu leaching from the shell, the inner FeCu core of E100 is able to be exposed and further strengthen Fe-based Fenton-like reactions. Overall, the appropriate synergistic effects endow E100 with superior catalytic activity and reusability than other catalysts. Our work pushes forward a step for understanding the catalytic mechanism of Fe-Cu bimetallic catalysts and provides new sights for fabricating efficient Fenton-like catalysts for environmental remediation.

Porphyrin-Based Two-Dimensional Layered Metal-Organic Framework with Sono-/Photocatalytic Activity for Water Decontamination

Water treatment is crucial to improve the water quality and reduce diarrheal and chronological diseases caused by excessive discharge of organic dyes and other waste. The development and expansion of efficient catalysts for the degradation and sterilization of organic dyes has attracted widespread attention. Herein, we report an example of a porphyrin-based two-dimensional layered metal-organic framework (MOF) (2DZnTcpp) and its efficient sono-/photocatalytic degradation of organic dyes and bactericidal activity. The dislocated layers effectively avoid close π-π stacking and provide a porous space for oxygen/water/dye contact. The introduction of Zn ions increases the spin orbital coupling through the heavy atom effect and promotes the intersystem crossing process for singlet oxygen generation. The effective ligand-to-metal charge transfer and the excessive open Zn catalytic sites also facilitate water splitting for hydroxyl radical generation. These features together promote the reactive oxygen species (ROS) generation of 2DZnTcpp under light illumination or ultrasound sonication. It is worth noting that the 2DZnTcpp with a high specific surface area and porosity shows efficient sono-/photocatalytic degradation of organic dye waste. Moreover, 2DZnTcpp could also largely inactivate Escherichia coli under light irradiation (the light power of 1 sun) or ultrasound sonication for 30 min with efficiencies over 99.99999%. This work provides an approach for the design and synthesis of MOF-based sono-/photocatalysts used in the purification and treatment of textile wastewater and is committed to the establishment of a more efficient, fast, and environmentally friendly catalytic system.

Direct oxidation of peroxymonosulfate under natural solar radiation: Accelerating the simultaneous removal of organic contaminants and pathogens from water

This study investigates the effectiveness of non-activated peroxymonosulfate (PMS) as oxidative agent for water purification in the presence and absence of natural solar radiation. The inactivation of three pathogens (Escherichia coli, Enterococcus faecalis and Pseudomonas aeruginosa) and degradation of three Contaminants of Emerging Concern (CECs) (Trimethoprim-TMP, Sulfamethoxazole-SMX and Diclofenac-DCF) was simultaneously assessed in isotonic water (IW) by testing a wide range of PMS concentrations (from 0.0001 to 0.01 mM). A significant oxidative effect of PMS in darkness was obtained for both bacteria and CEC abatement, but when irradiated with solar light, results demonstrated a great enhancement on all bacterial kinetic rates, reaching >5 Log reduction in 30 min (1.5 kJL^-1 of Q_UV) with 0.005 mM of oxidant as the best concentration. For CECs, higher degradation performance was obtained with 0.01 mM, 80% removal of DCF, SMX and TMP was achieved in 16 min (1.5 kJL^-1), 27 min (9.4 kJL^-1) and 150 min (16.8 kJL^-1), respectively. Besides, the influence of inorganic species on the global PMS/solar system performance was assessed by testing its effectiveness in distilled water (DW), natural well water (WeW) and diluted well water (d-WeW) at 0.01 mM. Results revealed that (i) high chloride concentration (IW) has an important positive effect, (ii) the presence of a complex inorganic chemical water composition reduced the system efficiency (WeW), and (iii) no differences were obtained from the presence of low or high contents of carbonates/bicarbonates (WeW versus d-WeW), obtaining the following global PMS/solar efficiency performance order: IW > DW > WeW = d-WeW.

Photocatalytic activation of peroxymonosulfate (PMS) by novel mesoporous Ag/ZnO@NiFe2O4 nanorods, inducing radical-mediated acetaminophen degradation under UVA irradiation

A new mesoporous Ag/ZnO@NiFe₂O₄ nanorod was prepared by a facile, low-cost, and environmentally friendly strategy from a bimetallic Fe₂Ni-MIL-88 metal organic framework (MOF), as an effective catalyst and peroxymonosulfate (PMS) photo-activator. The structural, morphological, optical, and magnetic properties, as well as the material composition were investigated by XRD, FE-SEM, EDX, HR-TEM, XPS, DRS, PL, EIS, VSM, N₂ adsorption-desorption and ICP-AES analysis. 1.0% w/w loading of Ag nanoparticles on ZnO_0.04@NiFe₂O₄ led to the best catalytic activity for PMS activation under UVA in acetaminophen (ACT) degradation. The maximum degradation efficiency for ACT was 100% within 15 min (at pH = 7.0), with a first-order rate constant of 0.368 min^-1. The calculated quantum yield (1.3 × 10^-3 molecule/photon) of the optimum catalyst was 2.05, and 5.63 times higher than its simple constituents, ZnO_0.04@NiFe₂O₄ and NiFe₂O₄, respectively. Among the various inorganic ions, Cl^- and HCO₃^- showed significant inhibition effect in 1.0%w/w Ag/ZnO_0.04@NiFe₂O₄/PMS/UVA system, due to radical quenching effects. Based on scavenger experiments, HO^• and SO₄^•- were the dominant reactive species in photocatalytic process coupled with PMS. Due to presence of the Fe³⁺/Fe²⁺, and Ni²⁺/Ni³⁺ reaction cycles in the as-made catalyst, the reaction rate of PMS activation was greatly enhanced. Moreover, the formation of a hetero-junction structure with NiFe₂O₄ and ZnO promoted the charge separation of the photo-generated electron/hole pairs. Finally, the major intermediates produced during the reaction were detected by LC-MS analysis, and a plausible mechanism for the photocatalytic degradation of ACT was proposed and discussed in detail.

Solar Water Disinfection to Produce Safe Drinking Water: A Review of Parameters, Enhancements, and Modelling Approaches to Make SODIS Faster and Safer

Solar water disinfection (SODIS) is one the cheapest and most suitable treatments to produce safe drinking water at the household level in resource-poor settings. This review introduces the main parameters that influence the SODIS process and how new enhancements and modelling approaches can overcome some of the current drawbacks that limit its widespread adoption. Increasing the container volume can decrease the recontamination risk caused by handling several 2 L bottles. Using container materials other than polyethylene terephthalate (PET) significantly increases the efficiency of inactivation of viruses and protozoa. In addition, an overestimation of the solar exposure time is usually recommended since the process success is often influenced by many factors beyond the control of the SODIS-user. The development of accurate kinetic models is crucial for ensuring the production of safe drinking water. This work attempts to review the relevant knowledge about the impact of the SODIS variables and the techniques used to develop kinetic models described in the literature. In addition to the type and concentration of pathogens in the untreated water, an ideal kinetic model should consider all critical factors affecting the efficiency of the process, such as intensity, spectral distribution of the solar radiation, container-wall transmission spectra, ageing of the SODIS reactor material, and chemical composition of the water, since the substances in the water can play a critical role as radiation attenuators and/or sensitisers triggering the inactivation process.