Coordinated response of Au-NPs/rGO modified electroactive biofilms under phenolic compounds shock: Comprehensive analysis from architecture, composition, and activity

Enhancement of the start-up and performance of an upflow anaerobic sludge blanket (UASB) reactor using electrochemically-enriched biofilm

A novel approach was developed to accelerate the start-up of a 20-L UASB reactor under mesophilic conditions. Two runs were conducted, where the first run (Run I) was inoculated with anaerobic sludge, and the second run (Run II) was inoculated with the same sludge supplemented with enriched electro-active biofilms collected from the working and counter electrodes of anodic and cathodic bio-electrochemical systems (BESs). Reactors' performance and microbial dynamics were monitored over 41 days. Methane production in Run II exceeded 200 mL-CH4/g-COD within 10 days, compared to 29 days in Run I. Run II achieved 80 % removal of soluble COD after 13 days as compared to 23 days in Run I. Sludge washout in Run II stabilized after 3 days, achieving 70 % VSS removal, whereas Run I required 17 days. Greater extracellular polymeric substance (EPS) values and higher protein-to-polysaccharide ratios in Run II may indicate accelerated granules formation mediated by EPS. 16S rRNA gene sequencing analysis results revealed shared genera between both runs but different relative abundances. Methanothrix dominated in Run I, while other archaeal genera, mainly Methanosarcina and Methanobacterium increased in abundance in the Run II. The Enterobacteriaceae family was prevalent in both reactors, with three genera, Citrobacter, Klebsiella, and Enterobacter distinctly dominating at different time points, suggesting potential links with the initial seed sludge or enriched biofilm consortia. The addition of electrochemically grown biofilm in Run II likely enhanced the microbial diversity, contributed to the rapid development of granular syntrophic communities, and improved reactor performance.

Enhanced chloramphenicol biodegradation and sustainable electricity generation via co-cultured electroactive biofilms modified with in-situ self-assembled gold nanoparticles and reduced graphene oxide

Bioelectrochemical technology emerges as a promising approach for addressing the challenge of antibiotic residue contamination. This research innovated by incorporating in-situ self-assembled gold nanoparticles (Au-NPs) and reduced graphene oxide (rGO) into a co-cultured electroactive biofilm (EAB) of Raoultella sp. DB-1 and Shewanella oneidensis MR-1 (Au-rGO@R/S-C). Supported by the rGO scaffold, the embedding of Au-NPs at key intercellular sites, and the adhesion of extracellular polymeric substance (EPS), the Au-rGO@R/S-C EAB enhanced the bioelectrochemical performance of the inoculated microbial fuel cell (MFC), with a 34.4% increase in the maximum voltage output and a 1.95-fold rise in the maximum power density, enabling the complete degradation of 100 mg/L chloramphenicol within 24 h. Notably, the Au-rGO@R/S-C EAB adapted to increased chloramphenicol stress by amplifying EPS secretion, especially with an elevated protein/polysaccharide ratio. Further analysis indicated a positive correlation between excessive production of EPS, particularly the increase in tightly bound EPS, and the stability in balancing the self-protection and extracellular electron transfer efficiency of the Au-rGO@R/S-C EAB under environmental stress. Our findings present a crucial strategy for the rational engineering of EABs, leveraging their dual potential in both environmental remediation and clean energy production.

In-depth exploration of microbial electrolysis cell coupled with anaerobic digestion (MEC-AD) for methanogenesis in treating protein wastewater at high organic loading rates

High concentrations of protein wastewater often reduce treatment efficiency due to ammonia inhibition and acid accumulation caused by its low carbon-to-nitrogen ratio (C/N) after digestion, as well as its complex structure. This study investigates the performance of a microbial electrolysis cell (MEC) driving a protein digestion system with gradually increasing organic loading rates (OLR) of bovine serum albumin, elucidating microbial changes and methanogenic metabolic pathways on bioelectrodes under high OLR "inhibited steady-state" (ISS) conditions. The results showed that the accumulation of ammonia nitrogen (AN) from protein hydrolysis under high OLR conditions disrupted microbial growth and caused cell death on the electrode surface, hindering the electron transfer rate. Toxic AN reduced protein hydrolysis, led to propionate accumulation, inhibiting the acetoclastic methanogenesis process and favoring the hydrogenotrophic pathway. As OLR increased from 6 to 11 gCOD/L, cumulative methane production increased significantly from 450.24 mL to 738.72 mL, while average methane yield and production rate decreased by 10.51% and 50.28%, from 375.20 mL/gCOD and 75.04 mL/(gCOD·d) to 335.78 mL/gCOD and 37.31 mL/(gCOD·d), respectively. Despite these declines, the system maintained an ISS. Moderate OLR increases can achieve an ISS, boosting protein waste treatment capacity, methane production, and net energy output (NEO), with an OLR of 6 gCOD/L being optimal for maximizing NEO per unit substrate. These findings provide theoretical insights into the methanogenesis pathway of high OLR proteins in MEC-AD systems and offer an effective method for treating high OLR protein wastewater in future practical applications.

Natural defence mechanisms of electrochemically active biofilms: From the perspective of microbial adaptation, survival strategies and antibiotic resistance

Electrochemically active biofilms (EABs) play an ever-growingly critical role in the biological treatment of wastewater due to its low carbon footprint and sustainability. However, how the multispecies biofilms adapt, survive and become tolerant under acute and chronic toxicity such as antibiotic stress still remains well un-recognized. Here, the stress responses of EABs to tetracycline concentrations (CTC) and different operation schemes were comprehensively investigated. Results show that EABs can quickly adapt (start-up time is barely affected) to low CTC (≤ 5 μM) exposure while the adaptation time of EABs increases and the bioelectrocatalytic activity decreases at CTC ≥ 10 μM. EABs exhibit a good resilience and high anti-shocking capacity under chronic and acute TC stress, respectively. But chronic effects negatively affect the metabolic activity and extracellular electron transfer, and simultaneously change the spatial morphology and microbial community structure of EABs. Particularly, the typical exoelectrogens Geobacter anodireducens can be selectively enriched under chronic TC stress with relative abundance increasing from 45.11% to 85.96%, showing stronger TC tolerance than methanogens. This may be attributed to the effective survival strategies of EABs in response to TC stress, including antibiotic efflux regulated by tet(C) at the molecular level and the secretion of more extracellular proteins in the macro scale, as the C=O bond in amide I of aromatic amino acids plays a critical role in alleviating the damage of TC to cells. Overall, this study highlights the versatile defences of EABs in terms of microbial adaptation, survival strategies, and antibiotic resistance, and deepens the understanding of microbial communities' evolution of EABs in response to acute and chronic TC stress.

Dynamic membrane filtration accelerates electroactive biofilms in bioelectrochemical systems

Bioelectrochemical systems (BES) have emerged as a dual-function technology for treating wastewater and recovering energy. A vital element of BES is the rapid formation and maintenance of electroactive biofilms (EABs). Previous attempts to accelerate EAB formation and improve electroactivities focused on enhancing the bacterial adhesion process while neglecting the rate-limiting step of the bacterial transport process. Here, we introduce membrane filtration into BES, establishing a dynamic membrane filtration system that enhances overall performance. We observed that optimal membrane flux considerably reduced the startup time for EAB formation. Specifically, EABs established under a 25 L m-2 h-1 flux (EAB25 LMH) had a formation time of 43.8 ± 1.3 h, notably faster than the 51.4 ± 1.6 h in the static state (EAB0 LMH). Additionally, EAB25 LMH exhibited a significant increase in maximum current density, approximately 2.2 times higher than EAB0 LMH. Pearson correlation analysis indicated a positive relationship between current densities and biomass quantities and an inverse correlation with startup time. Microbial analysis revealed two critical findings: (i) variations in maximum current densities across different filtration conditions were associated with redox-active substances and biomass accumulation, and (ii) the incorporation of a filtration process in EAB formation enhanced the proportion of viable cells and encouraged a more diverse range of electroactive bacteria. Moreover, the novel electroactive membrane demonstrated sustained current production and effective solid-liquid separation during prolonged operation, indicating its potential as a viable alternative in membrane-based systems. This approach not only provides a new operational model for BES but also holds promise for expanding its application in future wastewater treatment solutions.

Electroactive properties of EABs in response to long-term exposure to polystyrene microplastics/nanoplastics and the underlying adaptive mechanisms

Given widespread presence of polystyrene (PS) microplastics/nanoplastics (MPs/NPs), the electroactive responses and adaptation mechanisms of electroactive biofilms (EABs) exposed long-term to PS-containing aquatic environments remain unclear. Therefore, this study investigated the impacts of PS MPs/NPs on electroactivity of EABs. Results found that EABs exhibited delayed formation upon initially exposure but displayed an increased maximum current density (Imax) after subsequent exposure for up to 55 days. Notably, EABs exposure to NH2PS NPs (EAB-NH2PSNPs) demonstrated a 50% higher Imax than the control, along with a 17.84% increase in viability and a 58.10% increase in biomass. The cytochrome c (c-Cyts) content in EAB-NH2PSNPs rose by 178.35%, benefiting the extracellular electron transfer (EET) of EABs. Moreover, bacterial community assembly indicated the relative abundance of electroactive bacteria increased to 87.56% in EAB-NH2PSNPs. The adaptability mechanisms of EABs under prolonged exposure to PS MPs/NPs predominantly operate by adjusting viability, EET, and bacterial community assembly, which were further confirmed a positive correlation with Imax through structural equation model. These findings provide deeper insights into long-term effects and mechanisms of MPs/NPs on the electroactive properties of EABs and even functional microorganisms in aquatic ecosystems.

Boosting anaerobic digestion of long chain fatty acid with microbial electrolysis cell combining metal organic framework as cathode: Biofilm construction and metabolic pathways

The role of metal organic framework (MOF) modified cathode in promoting long chain fatty acid (LCFA) methanation was identified in microbial electrolysis cell coupled anaerobic digestion (MEC-AD) system. The maximum methane production rate of MEC-AD-MOF achieved 49.8 ± 3.4 mL/d, which increased by 41 % compared to MEC-AD-C. The analysis of bio-cathode biofilm revealed that microbial activity, distribution, population, and protein secretion prompted by MOF cathode, which in turn led to an acceleration of electron transfer between the cathode and microbes. Specifically, the relative abundance of acetate-oxidizing bacterium (Mesotoga) in MEC-AD-MOF was 1.5-3.6 times higher than that in MEC-AD-C, with a co-metabolized enrichment of Methanobacterium. Moreover, MOF cathode reinforced LCFA methanation by raising the relative abundance of genes coded key enzymes involved in CO2-reducing pathway, and elevating the tolerance of microbes to LCFA inhibition. These results indicate that MOF can enhance biofilm construction in MEC-AD, thereby improving the treatment performance of lipid wastewater.

Enhancing microbial salt tolerance through low-voltage stimulation for improved p-chloronitrobenzene (p-CNB) removal in high-salinity wastewater

As an important raw material for the synthesis of chemical and pharmaceutical, hazardous carcinogen p-chloronitrobenzene (p-CNB) has been widely found in high-salinity wastewater which need to be treated carefully. Due to the high-salinity shock on microorganisms, conventional microbial treatment technologies usually show poor effluent quality. This study initially investigated the p-CNB removal performance of microorganisms stimulated by 1.2 V low-voltage in high-salinity wastewater under facultative anaerobic conditions and further revealed the enhanced mechanisms. The results showed that the p-CNB removal kinetic parameter kp-CNB in the electrostimulating microorganism reactor (EMR) increased by 104.37 % to 155.30 % compared to the microorganism reactor (MR) as the control group under the varying salinities (0-45 g/L NaCl). The secretion of extracellular polymeric substances (EPS) in halotolerant microorganisms mainly enhanced by 1.2 V voltage stimulation ranging from 0 g/L NaCl to 30 g/L NaCl. Protein concentration ratio of EMR to MR in loosely bound EPS achieved maximum value of 1.77 at the salinity of 15 g/L NaCl, and the same ratio in tightly bound EPS also peaked at 1.39 under the salinity of 30 g/L NaCl. At the salinity of 45 g/L NaCl, 1.2 V voltage stimulation mainly enhanced salt-in strategy of halotolerant microorganisms, and the intracellular Na+ and K+ concentration ratio of EMR to MR reached maximum and minimum values of 0.65 and 1.92, respectively. Furthermore, the results of microbial metagenomic and metatranscriptomic analysis showed the halotolerant microorganisms Pseudomonas_A and Nitratireductor with p-CNB removal ability were enriched significantly under 1.2 V voltage stimulation. And the gene expression of p-CNB removal, salt-in strategy and betaine transporter were enhanced under voltage stimulation at varying salinities. Our investigation provided a new solution which combined with 1.2 V voltage stimulation and halotolerant microorganisms for the treatment of high-salinity wastewater.

Biofilm metagenomic characteristics behind high coulombic efficiency for propanethiol deodorization in two-phase partitioning microbial fuel cell

Hydrophobic volatile organic sulfur compounds (VOSCs) are frequently found during sewage treatment, and their effective management is crucial for reducing malodorous complaints. Microbial fuel cells (MFC) are effective for both VOSCs abatement and energy recovery. However, the performance of MFC on VOSCs remains limited by the mass transfer efficiency of MFC in aqueous media. Inspired by two-phase partitioning biotechnology, silicone oil was introduced for the first time into MFC as a non-aqueous phase (NAP) medium to construct two-phase partitioning microbial fuel cell (TPPMFC) and augment the mass transfer of target VOSCs of propanethiol (PT) in the liquid phase. The PT removal efficiency within 32 h increased by 11-20% compared with that of single-phase MFC, and the coulombic efficiency of TPPMFC (11.01%) was 4.32-2.68 times that of single-phase MFC owing to the fact that highly active desulfurization and thiol-degrading bacteria (e.g., Pseudomonas, Achromobacter) were attached to the silicone oil surface, whereas sulfur-oxidizing bacteria (e.g., Thiobacillus, Commonas, Ottowia) were dominant on the anodic biofilm. The outer membrane cytochrome-c content and NADH dehydrogenase activity improved by 4.15 and 3.36 times in the TPPMFC, respectively. The results of metagenomics by KEGG and COG confirmed that the metabolism of PT in TPPMFC was comprehensive, and that the addition of a NAP upregulates the expression of genes related to sulfur metabolism, energy generation, and amino acid synthesis. This finding indicates that the NAP assisted bioelectrochemical systems would be promising to solve mass-transfer restrictions in low solubility contaminates removal.

Indole-3-acetic acid mediated removal of sludge toxicity by microalgae: Focus on the role of extracellular polymeric substances

The use of indole-3-acid (IAA) as an additive aided in achieving the objectives of reducing sludge extract toxicity, increasing Tetradesmus obliquus biomass yield, and enhancing extracellular polysaccharide production. Proteomics analysis can unveil the microalgae's response mechanism to sludge toxicity stress. With 10-6 M IAA addition, microalgae biomass reached 3.426 ± 0.067 g/L. Sludge extract demonstrated 78.3 ± 3.2% total organic carbon removal and 72.2 ± 2.1% toxicity removal. Extracellular polysaccharides and proteins witnessed 2.08 and 1.76-fold increments, respectively. Proteomic analysis indicated that Tetradesmus obliquus directed carbon sources towards glycogen accumulation and amino acid synthesis, regulating pathways associated with carbon metabolism (glycolysis, TCA cycle, and amino acid metabolism) to adapt to the stressful environment. These findings lay the groundwork for future waste sludge treatment and offer novel insights into microalgae cultivation and extracellular polysaccharide enrichment in sludge.

Environmental biotechnology and the involving biological process using graphene-based biocompatible material

Biotechnology is a promising approach to environmental remediation but requires improvement in efficiency and convenience. The improvement of biotechnology has been illustrated with the help of biocompatible materials as biocarrier for environmental remediations. Recently, graphene-based materials (GBMs) have become promising materials in environmental biotechnology. To better illustrate the principle and mechanisms of GBM application in biotechnology, the comprehension of the biological response of microorganisms and enzymes when facing the GBMs is needed. The review illustrated distinct GBM-microbe/enzyme composites by providing the GBM-microbe/enzyme interaction and the determining factors. There are diverse GBM modifications for distinct biotechnology applications. Each of these methods and applications depends on the physicochemical properties of GBMs. The applications of these composites were mainly categorized as pollutant adsorption, anaerobic digestion, microbial fuel cells, and organics degradation. Where information was available, the strategies and mechanisms of GBMs in improving application efficacies were also demonstrated. In addition, the biological response, from microbial community changes, extracellular polymeric substances changes to biological pathway alteration, may become important in the application of these composites. Furthermore, we also discuss challenges facing the environmental application of GBMs, considering their fate and toxicity in the ecosystem, and offer potential solutions. This research significantly enhances our comprehension of the fundamental principles, underlying mechanisms, and biological pathways for the in-situ utilization of GBMs.

Acclimation of electroactive biofilms under different operating conditions: comprehensive analysis from architecture, composition, and metabolic activity

Electroactive biofilms (EABs) have aroused wide concern in waste treatment due to their unique capability of extracellular electron transfer with solid materials. The combined effect of different operating conditions on the formation, microbial architecture, composition, and metabolic activity of EABs is still unknown. In this study, the impact of three different factors (anode electrode, substrate concentration, and resistance) on the acclimation and performance of EABs was investigated. The results showed that the shortest start-up time of 127.3 h and highest power density of 0.84 W m-2 were obtained with carbon brush as electrode, low concentration of substrate (1.0 g L-1), and 1000 Ω external resistance (denoted as N1). The EABs under N1 condition also represented strongest redox capacity, lowest internal resistance, and close arrangement of bacteria. Moreover, the EABs cultured under different conditions both showed similar results, with direct electron transfer (DET) dominated from EABs to anode. Microbial community compositions indicated that EABs under N1 condition have lowest diversity and highest abundance of electroactive bacteria (46.68%). Higher substrate concentration (3.0 g L-1) promoted the proliferation of some other bacteria without electroactivity, which was adverse to EABs. The metabolic analysis showed the difference of genes related to electron transfer (cytochrome C and pili) and biofilm formation (xap) of EABs under different conditions, which further demonstrated the higher electroactivity of EABs under N1. These results provided a comprehensive understanding of the effect of different operating conditions on EABs including biofilm formation and electrochemical activity.

Microbe-Anode Interactions: Comparing the impact of genetic and material engineering approaches to improve the performance of microbial electrochemical systems (MES)

Microbial electrochemical systems (MESs) are a highly versatile platform technology with a particular focus on power or energy production. Often, they are used in combination with substrate conversion (e.g., wastewater treatment) and production of value-added compounds via electrode-assisted fermentation. This rapidly evolving field has seen great improvements both technically and biologically, but this interdisciplinarity sometimes hampers overseeing strategies to increase process efficiency. In this review, we first briefly summarize the terminology of the technology and outline the biological background that is essential for understanding and thus improving MES technology. Thereafter, recent research on improvements at the biofilm-electrode interface will be summarized and discussed, distinguishing between biotic and abiotic approaches. The two approaches are then compared, and resulting future directions are discussed. This mini-review therefore provides basic knowledge of MES technology and the underlying microbiology in general and reviews recent improvements at the bacteria-electrode interface.

Toxicity effects of polystyrene nanoplastics and arsenite on Microcystis aeruginosa

Despite the increasing research on the fate of nanoplastics (NPs, <100 nm) in freshwater systems, little is known about the joint toxic effects of metal(loid)s and NPs modified with different functional groups on microalgae. Here, we explored the joint toxic effects of two types of polystyrene NPs [one modified with a sulfonic acid group (PSNPs-SO₃H), and one without this functional group (PSNPs)] and arsenic (As) on the microalgae Microcystis aeruginosa. The results highlighted that PSNPs-SO₃H showed a smaller hydrodynamic diameter and greater potential to adsorb positively charged ions than PSNPs, contributing to the more severe growth inhibition, while both of them produced oxidative stress. Metabolomics further revealed that the fatty acid metabolism of the microalgae was significantly up-regulated under both NPs exposure, while PSNPs-SO₃H down-regulated the tricarboxylic acid cycle (TCA cycle) of the microalgae. As uptake by algae was significantly reduced by 82.58 % and 59.65 % in the presence of 100 mg/L PSNPs and PSNPs-SO₃H, respectively. The independent action model showed that the joint toxicity of both NPs with As was assessed as antagonistic. In addition, PSNPs and PSNPs-SO₃H had dissimilar effects on the composition of the microalgae extracellular polymeric substances (EPS), resulting in different uptake and adsorption of As, thereby affecting the physiology and biochemistry of algae. Overall, our findings propose that the specific properties of NPs should be considered in future environmental risk assessments.

Response of electroactive biofilms from real wastewater to metal ion shock in bioelectrochemical systems

The electrochemical activity of bioelectrochemical systems (BESs) was proven to be dependent on the stability of electroactive biofilms (EABs), but the response of EABs based on real wastewater to external disturbances is not fully known. Herein, we used real wastewater (beer brewery wastewater) as a substrate for culturing EABs and found that current generation, biomass, redox activity and extracellular polymeric substances (EPS) content in those EABs were lower as compared to EABs cultured with synthetic wastewaters (acetate and glucose). However, the EABs from the beer brewery wastewater showed moderate anti-shock resistance capability. The proteins and humic acid in loosely bound EPS (LB-EPS) exhibited a positive linear relationship with current recovery after Ag⁺ shock, indicating the importance of LB-EPS for protecting the EABs. Fluorescence and Fourier transform infrared spectroscopy integrated with two-dimensional correlation spectroscopy verified that the spectra of the protein-like region of LB-EPS changed considerably under the interference of Ag⁺ concentration and the CO group of humic acid or proteins was mainly responsible for binding with Ag⁺ to attenuate its toxicity to the EABs. This is the first study revealing the underlying molecular mechanism of EABs cultured with real wastewater against external heavy metal shock and provides useful insights into enhancing the application of BESs in future water treatment.

Pyrogenic carbon facilitated microbial extracellular electron transfer in electrogenic granular sludge via geobattery mechanism

Electroactive pyrogenic carbon (PC) is an intriguing candidate for realizing the ambitious goals of large-scale applications of microbial electrochemical technologies (METs). In this study, PC was employed to promote the extracellular electron transfer (EET) within the electrogenic granular sludge (EGS) by acting as an electron conduit. The pecan shell-derived PC prepared at three temperatures (600, 800, and 1000 ˚C) contained rich oxygenated-functional moieties (mainly quinone) on the surface, endowing a good electron transfer capacity (EEC). The maximum current density (J_max) of EGS with PC amendment outperformed the control EGS without PC amendment, i.e., 100-132 times higher than J_amx of EGS in the absence of PC. Among various pyrolysis temperatures, the PC derived from 600 ˚C produced the highest J_max (0.40 A/ m²), 0.67-times, and 0.33-times higher than that of PC derived from 800 and 1000 ˚C, respectively. Furthermore, more polysaccharides were secreted in extracellular polymeric substance with PC amendments. The microbial community analysis demonstrated that the PC favored the growth of electroactive bacteria over methanogens. The metabolic pathway revealed that PC induced more functional enzymes in the quinone biosynthesis and cytochrome c and heme synthesis, resulting in an enhanced EET. The EEC of PC was responsible for the EET enhancement effect via PC acting as a geobattery to wire up the EGS and electrodes. Overall, this study pinpoints the finding of PC role in a mixed electroactive biofilm and provides a wide scenario of the PC applications in MET at large scales.

Quorum sensing signals improve the power performance and chlortetracycline degradation efficiency of mixed-culture electroactive biofilms

Electroactive biofilms (EABs) play an important role in bioelectrochemical systems due to their abilities to generate electrons and perform extracellular electron transfer (EET). Here, we investigated the effects of quorum sensing (QS) signals on power output, chlortetracycline degradation, and structure of EABs in MFCs treating antibiotic wastewater. The voltage output of MFCs with C4-HSL and PQS increased by 21.57% and 13.73%, respectively, compared with that without QS signals. The chlortetracycline degradation efficiency in closed-circuit MFCs with C4-HSL and PQS increased by 56.53% and 50.04%, respectively, which resulted from the thicker biofilms, higher biomass, and stronger activities. Additionally, QS signals induced the heterogeneous distribution of EPS for a balance between self-protection and EET under environmental pressure. Geobacter prevailed by the addition of QS signals to resist high chlortetracycline concentration. Our results provided a broader understanding on regulating EABs within electrode interface to improve their performance for environmental remediation and clean energy development.

•

The voltage output of MFCs was enhanced with the addition of QS signals

•

QS signals increased the bioelectrochemical degradation efficiency of CTC

•

EABs exhibited heterogeneity in composition and interaction by the QS signals

•

QS signals induced a balance between self-protection and EET of EABs

In situ fabrication of gold nanoparticles into biocathodes enhance chloramphenicol removal

The development of highly conductive biofilms is a key strategy to enhance antibiotic removal in bioelectrochemical systems (BESs) with biocathodes. In this study, Au nanoparticles (Au-NPs) were in situ fabricated in a biocathode (Au biocathode) to enhance the removal of chloramphenicol (CAP) in BESs. The concentration of Au(III) was determined to be 5 mg/L. CAP was effectively removed in the BES containing a Au biocathode with a removal percentage of 94.0% within 48 h; this result was 1.8-fold greater than that obtained using a biocathode without Au-NPs (51.7%). The Au-NPs significantly reduced the charge transfer resistance and promoted the electrochemical activity of the biocathode. In addition, the Au biocathode showed a specifical enrichment of Dokdonella, Bosea, Achromobacter, Bacteroides and Petrimonas, all of which are associated with electron transfer and contaminant degradation. This study provides a new strategy for enhancing CAP removal in BESs through a simple and eco-friendly electrode design.

Electrochemical and microbiological response of exoelectrogenic biofilm to polyethylene microplastics in water

Exoelectrogenic biofilm and the associated microbial electrochemical processes have recently been intensively studied for water treatment, but their response to and interaction with polyethylene (PE) microplastics which are widespread in various aquatic environments has never been reported. Here, we investigated how and to what extent PE microplastics would affect the electrochemistry and microbiology of exoelectrogenic biofilm in both microbial fuel cells (MFCs) and microbial electrolysis cells (MECs). When the PE microplastics concentration was increased from 0 to 75 mg/L in the MECs, an apparent decline in the maximum current density (from 1.99 to 0.74 A/m²) and abundance of electroactive bacteria (EAB) in the exoelectrogenic biofilm was noticed. While in the MFCs, the current output was not significantly influenced and the abundance of EAB lightly increased at 25 mg/L microplastics. In addition, PE microplastics restrained the viability of the exoelectrogenic biofilms in both systems, leading to a higher system electrode resistance. Moreover, the microbial community richness and the microplastics-related operational taxonomic units decreased with PE microplastics. Furthermore, the electron transfer-related genes (e.g., pilA and mtrC) and cytochrome c concentration decreased after adding microplastics. This study provides the first glimpse into the influence of PE microplastics on the exoelectrogenic biofilm with the potential mechanisms revealed at the gene level, laying a methodological foundation for the future development of efficient water treatment technologies.

Effects of microbial inactivation approaches on quantity and properties of extracellular polymeric substances in the process of wastewater treatment and reclamation: A review

Microbial extracellular polymeric substances (EPS) have a profound role in various wastewater treatment and reclamation processes, in which a variety of technologies are used for disinfection and microbial growth inhibition. These treatment processes can induce significant changes in the quantity and properties of EPS, and altered EPS could further adversely affect the wastewater treatment and reclamation system, including membrane filtration, disinfection, and water distribution. To clarify the effects of microbial inactivation approaches on EPS, these effects were classified into four categories: (1) chemical reactions, (2) cell lysis, (3) changing EPS-producing metabolic processes, and (4) altering microbial community. Across these different effects, treatments with free chlorine, methylisothiazolone, TiO₂, and UV irradiation typically enhance EPS production. Among the residual microorganisms in EPS matrices after various microbial inactivation treatments, one of the most prominent is Mycobacterium. With respect to EPS properties, proteins and humic acids in EPS are usually more susceptible to treatment processes than polysaccharides. The affected EPS properties include changes in molecular weight, hydrophobicity, and adhesion ability. All of these changes can undermine wastewater treatment and reclamation processes. Therefore, effects on EPS quantity and properties should be considered during the application of microbial inactivation and growth inhibition techniques.

A facile and fast strategy for cathodic electroactive-biofilm assembly via magnetic nanoparticle bioconjugation

Microbial electrosynthesis is a promising electricity-driven technology for converting carbon dioxide into value-added compounds, but the formation of cathodic electroactive-biofilms (CEBs) is challenging. Herein, we have demonstrated an innovative strategy for CEBs assembly via magnetic nanoparticle bioconjugation, which lies in the synergistic interactions among a bonder (Streptavidin, SA), conductive nanomaterials (Fe₃O₄), and a methanogen (M. barkeri). The results showed that the bioconjugated M. barkeri-SA-Fe₃O₄ biohybrids significantly enhanced both methane yield (33.2-fold) and faradaic efficiency (5.6-fold), compared with that of bare M. barkeri. Such an enhancement was attributed to the improved viability of CEBs with a higher biomass density. Particularly, more live cells were presented in the inner biofilms and promoted the long-distance electron exchange between the live outer-layer biofilm and the cathode electrode. Meanwhile, the higher redox activity of CEBs with the M. barkeri-SA-Fe₃O₄ biohybrids resulted in an improved transient charge storage capability, which was beneficial for the biological CO₂-to-CH₄ conversion via acting as an additional electron donor. This work has provided a new approach to accelerate the formation of CEBs and subsequent electron transfer, which holds a great potential for accomplishing electrosynthesis and CO₂ fixation.