Reductions of human enteric viruses in 10 commonly used activated carbon, polypropylene and polyester household drinking-water filters

Membrane modification in enhancement of virus removal: A critical review

Many waterborne diseases are related with viruses, and COVID-19 worldwide has raised the concern of virus security in water into the public horizon. Compared to other conventional water treatment processes, membrane technology can achieve satisfactory virus removal with fewer chemicals, and prevent the outbreaks of viruses to a maximal extent. Researchers developed new modification methods to improve membrane performance. This review focused on the membrane modifications that enhance the performance in virus removal. The characteristics of viruses and their removal by membrane filtration were briefly generalized, and membrane modifications were systematically discussed through different virus removal mechanisms, including size exclusion, hydrophilic and hydrophobic interactions, electronic interactions, and inactivation. Advanced functional materials for membrane modification were summarized based on their nature. Furthermore, it is suggested that membranes should be enhanced through different mechanisms mainly based on their ranks of pore size. The current review provided theoretical support regarding membrane modifications in the enhancement of virus removal and avenues for practical application.

Performance of public drinking water purifiers in control of trihalomethanes, antibiotics and antibiotic resistance genes

Point-of-use water purifiers are widely applied as a terminal treatment device to produce drinking water with high quality. However, concerns are raised regarding low efficiency in eliminating emerging organic pollutants. To enhance our understanding of the reliability and potential risks of water purifiers, the removal of trihalomethanes, antibiotics, and antibiotic resistance genes (ARGs) in four public water purifiers was investigated. In the four public water purifiers in October and November, the removal efficiencies of trichloromethane (TCM) and bromodichloromethane (BDCM) were 15%-69% (averagely 37%) and 6%-44% (averagely 23%). The levels of TCM and BDCM were lowered by all water purifiers in October and November, but accelerated in effluent compared to the influent in one public water purifier in December. The removal efficiencies of twelve antibiotics greatly varied with species and time. Out of twelve sampling cases, the removal efficiencies of total antibiotics were 25%-75% in ten cases. In the other two cases, very low removal efficiency (6%) or higher levels of antibiotics present in effluent compared to the influent were observed. Two public water purifiers effectively remove ARGs from water, with log removal rates of 0.45 log-3.89 log. However, in the other two public water purifiers, the ARG abundance accidently increased in the effluents. Overall, public water purifiers were more effective in removing antibiotics and ARGs compared to household water purifiers, but less or equally effective in removing trihalomethanes. Both public and household water purifiers could be contaminated and release the accumulated micro-pollutants or biofilm-related pollutants into effluent. The production frequency and standing time of water within water purifiers can impact the internal contamination and purification efficacy.

Enhanced disinfection byproducts formation by fine iron particles intercepted in household point-of-use facilities

To cope with the demand for good-quality potable water, household point-of-use (POU) facilities such as polypropylene cotton filters (PCFs) are widely used. However, the behaviors of new and used PCFs under discoloration are unclear. In this study, we found that new PCF did not effectively intercept particles under discoloration within the initial 5 d of inflow. In addition, the particles, especially the fine ones, accumulated in the long-used PCF exacerbated the risks of disinfection byproducts (DBPs) and microbes. The concentrations of trihalomethanes (THMs) and haloacetonitriles (HANs) in the effluent run through the PCF all increased over time; interestingly, all sharply increased after 5 d in accordance with the decrease in effluent iron particles. During this stage, maximum increases rate of 117.89% in THMs and 75.12% in HANs were observed. For haloacetic acids (HAAs), it served as the dominant contaminants, with concentrations approximately 10-fold greater than those of THMs and HANs. The increase showed that used PCFs could exacerbate the risks in DBPs exposure. Adenosine triphosphate (ATP) also showed a similar trend, with a maximum increase from 0.0033 to 0.0055 nmol/mL. Thus, PCFs can act only as pretreatment units and should be replaced after yellow water events. This study offers important guidance for PCF usage in drinking water purification, especially under discoloration.

Fabrication of high efficiency coronavirus filter using activated carbon nanoparticles

In this study design and fabrication of coronavirus filter based on the cellulose and carbon nanomaterials have been investigated. Particulate matter (PM) corona virus has attracted a lot of attention due to its great threat to human health. Nanoparticles are intertwined with fibers and form highly porous air filter paper. The structure of the filter has been characterized using scanning electron microscope (SEM) and Brunauer–Emmett–Teller (BET) analysis. In addition, by optimization with activated carbon (AC) nanoparticles, the prepared AC air filter paper shows a high removal efficiency of more than 95% for PM 100 nm. More importantly, this filter shows less pressure drop and less thickness. This filter has a positive effect on the prevention of this disease during the coronavirus epidemic and show high absorption efficiency air filter for PM more than 100 nm.