Subtle Side Chain Triggers Unexpected Two-Channel Charge Transport Property Enabling 80% Fill Factors and Efficient Thick-Film Organic Photovoltaics

Non-Fused π-Extension of Endcaps of Small Molecular Acceptors Enabling High-Performance Organic Solar Cells

The modular structure of small molecular acceptors (SMAs) allows for versatile modifications of the materials and boosts the photovoltaic efficiencies of organic solar cells (OSCs) in recent years. As a critical component, the endcaps of SMAs have been intensively investigated and modified to control the molecular aggregation and photo-electronic conversion. However, most of the studies focus on halogenation or π-fusion extension of the endcap moieties, but overlook the non-fused π-extension approach, which could be a promising strategy to balance the self-aggregation and compatibility behaviors. Herein, we reported two new acceptors namely BTP-Th and BTP-FTh based on non-fused π-extension of the endcap by chlorinated-thiophene, of which the latter molecule has better co-planarity and crystallinity because of the intramolecular noncovalent interactions. Paired with donor PBDB-T, the optimal device of BTP-FTh reveals a greater efficiency of 14.81 % that that of BTP-Th (13.91 %). Nevertheless, the BTP-Th based device realizes a lower energy loss, enabling BTP-Th as a good candidate to serve as guest acceptor. As a result, the ternary solar cells of PM6 : BTP-eC9 : BTP-Th output a champion efficiency up to 18.71 % with enhanced open-circuit voltage. This study highlights the significance of rational decoration of endcaps for the design of high-performance SMAs and photovoltaic cells.

Formation of Efficient Quasi-All-Polymer Solar Cells by Synergistic Effect of the Ternary Strategy and Solid Additives

All-polymer solar cells (all-PSCs) have been widely studied owing to their unique mechanical flexibility and stability. However, all-PSCs have a lower efficiency than small-molecule acceptor-based PSCs. In the work, a ternary quasi-all-polymer solar cell (Q-all-PSC) using a synergy of the ternary strategy and solid additive engineering is reported. The introduction of PC₇₁BM can not only match the energy level of the photoactive materials with an improved open circuit voltage (V_OC) of the ternary devices but also enhance photon capture, which can improve short circuit current density. It is found that there is effective charge transfer between PC₇₁BM and PY-IT, which can form an electron transport channel and promote efficient charge transport. Moreover, the introduction of PC₇₁BM made the PM6/PY-IT/PC₇₁BM ternary blends more crystalline while slightly reducing phase separation, resulting in a suitable domain size. Importantly, by introducing a high dielectric-constant PFBEK solid additive as the fasten matrix, the Q-all-PSC's efficiency can reach 16.42%. This method provides a new idea for future research on all-polymer solar cells.

Fine-Tuning of Siloxane Pendant Distance for Achieving Highly Efficient Eco-Friendly Nonfullerene Solar Cells

Side-chain engineering has been proved to show profound impact on polymer properties and blend morphology. Herein, the critical role of siloxane-terminated alkoxy side chains was revealed by a tiny decorating method through which the molar content of siloxane-terminated alkoxy side chain was fixed to 5 %, and its alkyl linker was the only tuning factor. The pentylene, heptylene, and nonylene linkers were designed and used to synthesize wide-bandgap polymers PQSi505, PQSi705, and PQSi905, respectively. Interestingly, the siloxane pendant of combinatory side chain exhibited a distinct impact on molecular packing when its branching position shifted slightly. Among the three polymers, PQSi705 had the strongest aggregation and the highest packing order. Finally, toluene-processed organic solar cells (OSCs) based on PQSi705 and Y6-BO achieved the best power conversion efficiency of 15.77 %. This work suggests that siloxane pendant can serve as a powerful modulator to enhance the photovoltaic performance of OSCs.

Integrating Unexpected High Charge-Carrier Mobility and Low-Threshold Lasing Action in an Organic Semiconductor

Integrating high charge-carrier mobility and low-threshold lasing action in an organic semiconductor is crucial for the realization of an electrically pumped laser, but remains a great challenge. Herein, we present an organic semiconductor, named as 2,7-di(2-naphthyl)-9H-fluorene (LD-2), which shows an unexpected high charge-carrier mobility of 2.7 cm²  V^-1  s^-1 and low-threshold lasing characteristic of 9.43 μJ cm^-2 and 9.93 μJ cm^-2 and high-quality factor (Q) of 2131 and 1684 at emission peaks of 420 and 443 nm, respectively. Detailed theoretical calculations and photophysical data analysis demonstrate that a large intermolecular transfer integral of 10.36-45.16 meV together with a fast radiative transition rate of 8.0×10⁸  s^-1 are responsible for the achievement of the superior integrated optoelectronic properties in the LD-2 crystal. These optoelectronic performances of LD-2 are among the highest reported low-threshold lasing organic semiconductors with efficient charge transport, suggesting its promise for research of electrically pumped organic lasers (EPOLs).

Impact of backbone linkage positions on the molecular aggregation behavior of polymer photovoltaic materials

It is imperative to advance the structural design of conjugated materials to achieve a practical impact on the performance of photovoltaic devices. However, the effect of the linkage positions (meta-, para-) of the backbone on the molecular packing has been relatively little explored. In this study, we have synthesized two wide-bandgap polymer photovoltaic materials from identical monomers with different linkage positions, using dibenzo[c,h][2,6]-naphthyridine-5,11-(6H,12H)-dione (DBND) as the building block. This study shows that the para-connected polymer exhibits an unexpected 0.2 eV higher ionization potential and a resultant higher open-circuit voltage than the meta-connected counterpart. We found that different linkage positions result in different intermolecular binding energies and molecular aggregation conformations, leading to different HOMO energy levels and photovoltaic performances. Specifically, theoretical calculations and 2D-NMR indicate that P(p-DBND-f-2T) performs a segregated stacking of f-2T and DBND units, while P(m-DBND-f-2T) films form π-overlaps between f-2T and DBND. These results show that linkage position adjustment on the polymeric backbone exerts a profound influence on the molecular aggregation of the materials. Also, the effect of isomerism on the polymer backbone is crucial in designing polymer structures for photovoltaic applications.

Ab Initio Study of Two-Dimensional Cross-Shaped Non-Fullerene Acceptors for Efficient Organic Solar Cells

In the present work, five novel non-fullerene acceptor molecules are represented to explore the significance of organic solar cells (OSCs). The electro-optical properties of the designed A-D-A-type molecules rely on the central core donor moiety associated with different halogen families such as fluorine, chlorine, and bromine atoms and acyl, nitrile, and nitro groups as acceptor moieties. Among these, M1 exhibits the maximum absorption (λmax) at 728 nm in a chloroform solvent as M1 has nitro and nitrile groups in the terminal acceptor, which is responsible for the red shift in the absorption coefficient as compared to R (716 nm). M1 also shows the lowest value of the energy band gap (2.07 eV) with uniform binding energy in the range of 0.50 eV for all the molecules. The transition density matrix results reveal that easy dissociation of the exciton is possible in M1. The highest value of the dipole moment (4.6 D) indicates the significance of M4 and M2 in OSCs as it reduces the chance of charge recombination. The low value of λe is given by our designed molecules concerning reference molecules, indicating their enhanced electron mobility. Thus, these molecules can serve as the most economically efficient material. Hence, all newly designed non-fullerene acceptors provide an overview for further development in the performance of OSCs.

Two Compatible Acceptors as an Alloy Model with a Halogen-Free Solvent for Efficient Ternary Polymer Solar Cells

A ternary strategy of halogen-free solvent processing can open up a promising pathway for the preparation of polymer solar cells (PSCs) on a large scale and can effectively improve the power conversion efficiency with an appropriate third component. Herein, the green solvent o-xylene (o-XY) is used as the main solvent, and the non-fullerene acceptor Y6-DT-4F as the third component is introduced into the PBB-F:IT-4F binary system to broaden the spectral absorption and optimize the morphology to achieve efficient PSCs. The third component, Y6-DT-4F, is compatible with IT-4F and can form an "alloy acceptor", which can synergistically optimize the photon capture, carrier transport, and collection capabilities of the ternary device. Meanwhile, Y6-DT-4F has strong crystallinity, so when introduced into the binary system as the third component can enhance the crystallization, which is conducive to the charge transport. Consequently, the optimal ternary system based on PBB-F:IT-4F:Y6-DT-4F achieved an efficiency of 15.24%, which is higher than that of the binary device based on PBB-F:IT-4F (13.39%).

Conjugated Polyelectrolyte/Silver Bromide Nanocomposites: Highly Durable and Robust Antibacterial Materials

We report the in situ synthesis of silver bromide nanoparticles (AgBr NPs) in a cationic conjugated polyelectrolyte (CPE) matrix. It is interesting that the obtained CPE/AgBr nanocomposite materials exhibit robust and long-term antimicrobial activity against both Gram-negative bacteria and Gram-positive bacteria by producing a large amount of biologically active Ag⁺. Meanwhile, it is demonstrated that the antimicrobial activity of CPE/AgBr nanocomposites is also related to the size of the AgBr NPs. Smaller particles show a faster AgBr release rate and hence higher antimicrobial activity than big particles. However, the relatively large-sized nanocomposites are beneficial to obtain long-term antimicrobial activity by substantially producing bioactive Ag⁺. Consequently, the antimicrobial property of the CPE/AgBr nanocomposites can be manipulated by controlling the dimensions of embedded AgBr NPs. The CPE/AgBr nanocomposites can cause a rapid initial drop of bacterial counts in solution, which makes it a potential candidate for antimicrobial therapy in emergency cases. In addition, the sustained release of Ag⁺ from large-sized nanocomposites makes them suitable for long-term use.

Discovery of amantadine formate: toward achieving ultrahigh pyroelectric performances in organics

Pyroelectrics are a class of polar compounds that output electrical signals upon changes in temperature. With the rapid development of flexible electronics, organic pyroelectrics are highly desired. However, most organics suffer from low pyroelectric coefficients or low working temperatures. To date, the realization of superior pyroelectric performance in all-organics has remained a challenge. Here, we report the discovery of amantadine formate, an all-organic pyroelectric with ultrahigh voltage figures of merit (F_v), surpassing those of all other known organics and commercial triglycine sulfate, LiTaO₃ as well around room temperature. The key to the high F_v is attributed to large pyroelectric coefficients in a favorable temperature range resulting from a ferroelectric-paraelectric phase transition of second order at 327 K, small dielectric constant, and moderate heat capacity. In addition, amantadine formate is relatively lightweight, soft, transparent, low-cost, and non-toxic, adding value to its potential applications in flexible electronics. Our results demonstrate that a new type of pyroelectrics can exist in organic compounds.

•

Organic pyroelectrics have great potential in wearable devices for temperature sensing, IR detection, thermal imaging, and energy harvesting

•

We report the first all-organic pyroelectric amantadine formate with properties better than that of TGS, a hybrid pyroelectric in use since the 1950s

•

Amantadine formate has a large pyroelectric coefficient and a surprisingly small dielectric constant, which play a key role in its excellent pyroelectric performance

•

The strategy of combining all-organic components and second-order phase transition will contribute to the exploration of new pyroelectrics

Over 17% Efficiency of Ternary Organic Photovoltaics Employing Two Acceptors with an Acceptor-Donor-Acceptor Configuration

Ternary organic photovoltaics (OPVs) were constructed with one wide-band-gap donor PM6 and two A-D-A-type acceptors (M-series M36 and MQ5) with similar chemical structures. Power conversion efficiency (PCE) of the optimal ternary OPVs reaches 17.24% with 20 wt % MQ5 content, arising from a simultaneously increased short circuit current density (J_SC) of 25.36 mA cm^-2 and a fill factor (FF) of 76.02% as compared to those of two binary OPVs. The photon harvesting of ternary active layers can be maximized by adjusting the MQ5 content by reason of the complementary absorption spectra of M36 and MQ5. The molecular arrangement of PM6 and M36 can be collectively optimized by introducing an appropriate amount of MQ5 as a morphology regulator for facilitating effective charge transportation in ternary active layers. The improved photon harvesting and charge transport in active layers should be two important factors responsible for J_SC and FF improvement of optimal ternary OPVs, respectively. More than an 8.8% improvement of PCE is achieved in ternary OPVs with an appropriate amount of MQ5 as the photon-harvesting enhancer and morphology regulator. The huge potential of A-D-A-type materials in constructing highly efficient OPVs can be further exploited based on a ternary strategy.

Technologies and perspectives for achieving carbon neutrality

Global development has been heavily reliant on the overexploitation of natural resources since the Industrial Revolution. With the extensive use of fossil fuels, deforestation, and other forms of land-use change, anthropogenic activities have contributed to the ever-increasing concentrations of greenhouse gases (GHGs) in the atmosphere, causing global climate change. In response to the worsening global climate change, achieving carbon neutrality by 2050 is the most pressing task on the planet. To this end, it is of utmost importance and a significant challenge to reform the current production systems to reduce GHG emissions and promote the capture of CO2 from the atmosphere. Herein, we review innovative technologies that offer solutions achieving carbon (C) neutrality and sustainable development, including those for renewable energy production, food system transformation, waste valorization, C sink conservation, and C-negative manufacturing. The wealth of knowledge disseminated in this review could inspire the global community and drive the further development of innovative technologies to mitigate climate change and sustainably support human activities.

Benzobis(Thiazole)-Based Conjugated Polymer with Varying Alkylthio Side-Chain Positions for Efficient Fullerene-Free Organic Solar Cells

Alkylthio groups can be used to modulate energy levels and molecular packing of organic semiconductors, which makes it important in the design of materials for organic solar cell. However, its effect has not been sufficiently exploited as most of the studies report introducing an alkylthio group to the donor unit and seldom to the acceptor unit of donor-acceptor conjugated polymers. In this report, two alkylthio-substituted polymers, namely, PBB-TSA and PBB-TSD, with benzo[1,2-d:4,5-d']bis(thiazole) (BBT) as the acceptor unit and benzo[1,2-b:4,5-b']dithiophene (BDT) as the donor unit, were rationally designed, synthesized, and applied in organic photovoltaics. An alkylthio side chain was substituted on the BBT-accepting unit for PBB-TSA, while for PBB-TSD, the alkylthio side chain was substituted on the BDT donor unit. PBB-TSA and PBB-TSD show upshifted and downshifted energy levels, respectively, compared to the nonsulfur-substituted material. Both polymers exhibit dominate face-on orientation, while PBB-TSD exhibits higher crystallinity compared to PBB-TSA. With the contribution of lower energy level and beneficial film morphology, the device based on PBB-TSD/IT-4F has much higher power conversion efficiency (PCE) of 14.6%, whereas the PBB-TSA blend had a lower PCE of 10.7%. 1,8-Diiodooctane can effectively optimize the blend film morphology, and the effect on device performance has also been demonstrated in detail. This result indicates that introducing an alkylthio side chain into the donor or acceptor moieties would result in materials with different energy levels and thus would be utilized to match with various acceptors, achieving optimized performance in organic solar cells.

Significantly Boosting Efficiency of Polymer Solar Cells by Employing a Nontoxic Halogen-Free Additive

Traditional additives like 1,8-diiodooctane and 1-chloronaphthalene were successfully utilized morphology optimization of various polymer solar cells (PSCs) in an active layer, but their toxicity brought by halogen atoms limits their corresponding large-scale manufacturing. Herein, a new nontoxic halogen-free additive named benzyl benzoate (BB) was introduced into the classic PSCs (PTB7-Th:PC₇₁BM), and an optimal power conversion efficiency (PCE) of 9.43% was realized, while there was a poor PCE for additive free devices (4.83%). It was shown that BB additives could inhibit PC₇₁BM's overaggregation, which increased the interface contact area and formed a better penetration path of an active layer. In addition, BB additives could not only boost the distribution of a PTB7-Th donor at the surface, beneficial to suppressing exciton recombination in inverted devices but also boost the crystallinity of a blend layer, which is conducive to exciton dissociation and charge transport. Our work effectively improved a device performance by using a halogen-free additive, which can be referential for industrialization.